source: Config.in@ 1fa0dee

ablfs-more legacy trunk
Last change on this file since 1fa0dee was 84a3fda, checked in by Pierre Labastie <pierre@…>, 7 years ago

Do not optimize binutils-pass1 in order to measure the SBU:

  • introduce REALSBU variable if Config.in and jhalfs, and display it
  • Adpat LFS/master.sh
  • Property mode set to 100644
File size: 42.3 KB
Line 
1menu "BOOK Settings"
2
3 #--- BOOK/script
4 choice
5 prompt "Use BOOK"
6 default BOOK_LFS
7 help
8 Select the book where build instructions are retrieved.
9
10 config BOOK_LFS
11 bool "Linux From Scratch System V"
12 help
13 Set up the tools to build LFS with Sys V init.
14
15 config BOOK_LFS_SYSD
16 bool "Linux From Scratch systemd"
17 help
18 Set up the tools to build LFS with systemd init.
19
20 config BOOK_CLFS
21 bool "Cross-Compiled Linux From Scratch"
22 help
23 Set up the tools to build CLFS.
24
25 config BOOK_CLFS2
26 bool "Cross-Compiled Linux From Scratch (Sysroot method)"
27 help
28 Set up the tools to build CLFS by the sysroot method.
29
30 config BOOK_CLFS3
31 bool "Cross-Compiled Linux From Scratch (Embedded Systems)"
32 help
33 Set up the tools to build CLFS with tools for embedded systems.
34
35 config BOOK_BLFS
36 bool "Beyond Linux From Scratch (see help)"
37 help
38 if the (C)LFS system has already been built, install the tools
39 to build BLFS packages.
40 endchoice
41
42 choice
43 depends BOOK_BLFS
44 prompt "Init system"
45
46 config BLFS_SYSV
47 bool "BLFS Sys V"
48 help
49 Extract the Sys V flavour of the BLFS book
50
51 config BLFS_SYSD
52 bool "BLFS systemd"
53 help
54 Extract the systemd flavour of the BLFS book
55
56 endchoice
57
58 config INITSYS
59 string
60 default "sysv" if BOOK_LFS || BLFS_SYSV
61 default "systemd" if BOOK_LFS_SYSD || BLFS_SYSD
62
63 config PROGNAME
64 string
65 default "lfs" if BOOK_LFS || BOOK_LFS_SYSD
66 default "clfs" if BOOK_CLFS
67 default "clfs2" if BOOK_CLFS2
68 default "clfs3" if BOOK_CLFS3
69
70 config RUN_ME
71 string
72 default "./jhalfs run" if BOOK_LFS || BOOK_LFS_SYSD || BOOK_CLFS || \
73 BOOK_CLFS2 || BOOK_CLFS_3
74 default "./install-blfs-tools.sh auto" if BOOK_BLFS
75 #--- End BOOK/script
76
77 #--- Book version
78 choice
79 prompt "Release"
80 default relSVN if BOOK_LFS || BOOK_LFS_SYSD || BOOK_BLFS
81 default relGIT if BOOK_CLFS || BOOK_CLFS2 || BOOK_CLFS3
82
83 config relSVN
84 bool "SVN"
85 depends on BOOK_LFS || BOOK_BLFS || BOOK_LFS_SYSD
86 help
87 Current development version as in trunk
88
89 config relGIT
90 bool "GIT"
91 depends on BOOK_CLFS || BOOK_CLFS2 || BOOK_CLFS3
92 help
93 Current development git master branch
94
95 config WORKING_COPY
96 bool "Working Copy"
97 help
98 A local working copy
99
100 config BRANCH
101 bool "Branch or stable book" if !BOOK_CLFS2 && !BOOK_CLFS3
102 help
103 A supported SVN/GIT branch or stable released book
104 endchoice
105
106 config BRANCH_ID
107 string "Branch (preceded by \"branch-\"), stable Version, or tag"
108 default "**EDIT ME**"
109 depends BRANCH
110 help
111 A list of valid branches and stable book IDs is available at
112 http://wiki.linuxfromscratch.org/alfs/wiki/SupportedBooks
113
114 Enter "branch-XXX" for branch XXX, or just "YYY" for stable (or tag)
115 YYY version.
116
117 config BOOK
118 string "Loc of working copy (mandatory)"
119 default "**EDIT ME**"
120 depends WORKING_COPY
121 help
122 The full path to a local copy of the book XML sources
123
124 #--- End BOOK version
125
126 #--- CLFS specific params
127 choice
128 prompt "Target architecture"
129 default ARCH_X86
130 depends BOOK_CLFS || BOOK_CLFS2 || BOOK_CLFS3
131 help
132 Choose the target system base architecture
133
134 config ARCH_X86
135 bool "x86"
136
137 config ARCH_MIPS
138 bool "mips" if !BOOK_CLFS2
139
140 config ARCH_PPC
141 bool "ppc" if BOOK_CLFS
142
143 config ARCH_SPARC
144 bool "sparc" if BOOK_CLFS
145
146 config ARCH_ALPHA
147 bool "alpha" if !BOOK_CLFS3
148
149 config ARCH_ARM
150 bool "arm" if !BOOK_CLFS
151
152 config ARCH_HPPA
153 bool "hppa" if BOOK_CLFS2
154 endchoice
155
156 choice
157 prompt "Hardware Platform"
158 depends BOOK_CLFS3 && ARCH_MIPS
159 default PLATFORM_GENERIC
160 help
161 Choose a destination platform
162 Platform specific files will be included
163
164 config PLATFORM_GENERIC
165 bool "Generic platform"
166
167 config PLATFORM_WRT
168 bool "WRT - MIPS based wireless router" if ARCH_MIPS
169 endchoice
170
171 choice
172 prompt "Library"
173 depends (BOOK_CLFS && !ARCH_ALPHA) || (BOOK_CLFS3 && ARCH_MIPS)
174 default DATA_32
175 help
176 Choose the target system libraries type
177
178 config DATA_32
179 bool "32-bit"
180
181 config DATA_64
182 bool "64-bit"
183
184 config DATA_MULTI
185 bool "multilib" if !(BOOK_CLFS3 && ARCH_MIPS )
186 endchoice
187
188 choice
189 prompt "Processor type"
190 depends (BOOK_CLFS || BOOK_CLFS2 || BOOK_CLFS3) && ((ARCH_X86 && !(DATA_64 || DATA_MULTI)) || ARCH_MIPS || ARCH_HPPA || ARCH_ALPHA || (ARCH_SPARC && (DATA_64 || DATA_MULTI)) || (ARCH_ARM && BOOK_CLFS3))
191 help
192 Choose the target system processor
193
194 config PROC_i486
195 bool "486 Compatibles" if ARCH_X86
196
197 config PROC_i586
198 bool "Pentium, K6, 586 Compatibles" if ARCH_X86
199
200 config PROC_i686
201 bool "Pentium II, Pentium III, Pentium 4, Athlon, Duron" if ARCH_X86
202
203 config PROC_mipsel
204 bool "MIPS Little Endian" if ARCH_MIPS
205
206 config PROC_mips
207 bool "MIPS Big Endian" if ARCH_MIPS
208
209 config PROC_unknown
210 bool "Unknown" if ARCH_HPPA || ARCH_ALPHA
211
212 config PROC_hppa1
213 bool "PA 7000 Series" if ARCH_HPPA
214
215 config PROC_hppa2
216 bool "PA 8000 Series" if ARCH_HPPA
217
218 config PROC_EV5
219 bool "EV5 Series" if ARCH_ALPHA
220
221 config PROC_EV56
222 bool "EV56 Series" if ARCH_ALPHA
223
224 config PROC_PCA56
225 bool "PCA56 Series" if ARCH_ALPHA
226
227 config PROC_PCA57
228 bool "PCA57 Series" if ARCH_ALPHA
229
230 config PROC_EV6
231 bool "EV6 Series" if ARCH_ALPHA
232
233 config PROC_EV67
234 bool "EV67 Series" if ARCH_ALPHA
235
236 config PROC_EV68
237 bool "EV68 Series" if ARCH_ALPHA
238
239 config PROC_ARM
240 bool "Generic arm, little endian" if ARCH_ARM
241
242 config PROC_ARM5L
243 bool "Generic arm, version 5, little endian" if ARCH_ARM
244
245 config PROC_ARM5B
246 bool "Generic arm, version 5, big endian" if ARCH_ARM
247
248 config PROC_ULTRA1
249 bool "UtraSparc" if ARCH_SPARC && (DATA_64 || DATA_MULTI)
250
251 config PROC_ULTRA2
252 bool "UtraSparc2" if ARCH_SPARC && (DATA_64 || DATA_MULTI)
253
254 config PROC_ULTRA3
255 bool "UtraSparc3" if ARCH_SPARC && (DATA_64 || DATA_MULTI)
256 endchoice
257
258 choice
259 prompt "MIPS 64 ABI"
260 depends BOOK_CLFS3 && ARCH_MIPS && DATA_64
261 default ABI_64
262 help
263 Choose the target system ABI to use
264
265 config ABI_32
266 bool "o32"
267
268 config ABI_N32
269 bool "n32"
270
271 config ABI_64
272 bool "n64"
273 endchoice
274
275 config TARGET
276 string
277 default "i486-pc-linux-gnu" if !BOOK_CLFS3 && PROC_i486
278 default "i586-pc-linux-gnu" if !BOOK_CLFS3 && PROC_i586
279 default "i686-pc-linux-gnu" if !BOOK_CLFS3 && PROC_i686
280
281 default "i486-pc-linux-uclibc" if BOOK_CLFS3 && PROC_i486
282 default "i586-pc-linux-uclibc" if BOOK_CLFS3 && PROC_i586
283 default "i686-pc-linux-uclibc" if BOOK_CLFS3 && PROC_i686
284
285 default "x86_64-unknown-linux-gnu" if ARCH_X86 && (DATA_64 || DATA_MULTI)
286
287 default "mipsel-unknown-linux-gnu" if !BOOK_CLFS3 && PROC_mipsel && DATA_32
288 default "mips-unknown-linux-gnu" if !BOOK_CLFS3 && PROC_mips && DATA_32
289 default "mips64el-unknown-linux-gnu" if !BOOK_CLFS3 && PROC_mipsel && (DATA_64 || DATA_MULTI)
290 default "mips64-unknown-linux-gnu" if !BOOK_CLFS3 && PROC_mips && (DATA_64 || DATA_MULTI)
291
292 default "mipsel-unknown-linux-uclibc" if BOOK_CLFS3 && PROC_mipsel && DATA_32
293 default "mips-unknown-linux-uclibc" if BOOK_CLFS3 && PROC_mips && DATA_32
294 default "mips64el-unknown-linux-uclibc" if BOOK_CLFS3 && PROC_mipsel && DATA_64
295 default "mips64-unknown-linux-uclibc" if BOOK_CLFS3 && PROC_mips && DATA_64
296
297 default "powerpc-unknown-linux-gnu" if ARCH_PPC && DATA_32
298 default "powerpc64-unknown-linux-gnu" if ARCH_PPC && (DATA_MULTI || DATA_64)
299
300 default "sparc-unknown-linux-gnu" if ARCH_SPARC && DATA_32
301 default "sparc64-unknown-linux-gnu" if ARCH_SPARC && (DATA_64 || DATA_MULTI)
302
303 default "hppa-unknown-linux-gnu" if PROC_unknown && ARCH_HPPA
304 default "hppa1.1-unknown-linux-gnu" if PROC_hppa1
305 default "hppa2.0-unknown-linux-gnu" if PROC_hppa2
306
307 default "arm-unknown-linux-gnueabi" if ARCH_ARM && BOOK_CLFS2
308
309 default "arm-unknown-linux-uclibc" if PROC_ARM
310 default "armv5l-unknown-linux-uclibc" if PROC_ARM5L
311 default "armv5b-unknown-linux-uclibc" if PROC_ARM5B
312
313 default "alpha-unknown-linux-gnu" if PROC_unknown && ARCH_ALPHA
314 default "alphaev5-unknown-linux-gnu" if PROC_EV5
315 default "alphaev56-unknown-linux-gnu" if PROC_EV56
316 default "alphapca56-unknown-linux-gnu" if PROC_PCA56
317 default "alphapca57-unknown-linux-gnu" if PROC_PCA57
318 default "alphaev6-unknown-linux-gnu" if PROC_EV6
319 default "alphaev67-unknown-linux-gnu" if PROC_EV67
320 default "alphaev68-unknown-linux-gnu" if PROC_EV68
321
322 config TARGET32
323 string
324 depends DATA_MULTI
325 default "i686-pc-linux-gnu" if ARCH_X86
326 default "mipsel-unknown-linux-gnu" if PROC_mipsel
327 default "mips-unknown-linux-gnu" if PROC_mips
328 default "sparc-unknown-linux-gnu" if ARCH_SPARC
329 default "powerpc-unknown-linux-gnu" if ARCH_PPC
330
331 config PLATFORM
332 string
333 default "GENERIC" if (!BOOK_CLFS3) || PLATFORM_GENERIC
334 default "WRT - Wireless Router" if PLATFORM_WRT
335
336 config SPARC64_PROC
337 string
338 default "none" if !(ARCH_SPARC && (DATA_64 || DATA_MULTI))
339 default "1" if PROC_ULTRA1
340 default "2" if PROC_ULTRA2
341 default "3" if PROC_ULTRA3
342
343 config ARCH
344 string
345 default "x86" if ARCH_X86 && (DATA_32 || BOOK_CLFS2 || BOOK_CLFS3)
346 default "x86_64" if ARCH_X86 && DATA_MULTI
347 default "x86_64-64" if ARCH_X86 && DATA_64
348
349 default "wrt" if PLATFORM_WRT && BOOK_CLFS3
350
351 default "mips" if ARCH_MIPS && (DATA_32 || BOOK_CLFS3)
352 default "mips64" if ARCH_MIPS && DATA_MULTI
353 default "mips64-64" if ARCH_MIPS && DATA_64 && BOOK_CLFS
354
355
356 default "ppc" if ARCH_PPC && DATA_32
357 default "ppc64" if ARCH_PPC && DATA_MULTI
358 default "ppc64-64" if ARCH_PPC && DATA_64
359
360 default "sparc" if ARCH_SPARC && DATA_32
361 default "sparc64" if ARCH_SPARC && DATA_MULTI
362 default "sparc64-64" if ARCH_SPARC && DATA_64
363
364 default "alpha" if ARCH_ALPHA
365 default "arm" if ARCH_ARM
366 default "hppa" if ARCH_HPPA
367
368 config MIPS_LEVEL
369 string
370 depends BOOK_CLFS3 && ARCH_MIPS
371 default "1" if DATA_32
372 default "3" if DATA_64
373
374 config ABI
375 string
376 depends BOOK_CLFS3
377 default "-m32" if ARCH_X86 || ARCH_ARM
378# default "-m64" if NO USED YET IN THE BOOK
379 default "-mabi=32" if ABI_32 || (ARCH_MIPS && DATA_32)
380 default "-mabi=n32" if ABI_N32
381 default "-mabi=64" if ABI_64
382
383 config ENDIAN
384 string
385 depends BOOK_CLFS3 && (ARCH_MIPS || ARCH_ARM)
386 default "little" if PROC_mipsel || PROC_ARM || PROC_ARM5L
387 default "big" if PROC_mips || PROC_ARM5B
388
389 choice
390 prompt "Build method"
391 depends BOOK_CLFS
392 help
393 What build method should be used: a chroot jail or minimal boot
394 system. Review the Cross-LFS book chap6 "TO BOOT OR CHROOT" for
395 a full explanation.
396
397 config BUILD_CHROOT
398 bool "chroot"
399
400 config BUILD_BOOT
401 bool "boot"
402 endchoice
403
404 config METHOD
405 string
406 default "chroot" if BUILD_CHROOT
407 default "boot" if BUILD_BOOT
408
409 config BOOT_CONFIG
410 string "BOOT kernel config file (mandatory)"
411 default "***EDIT ME***"
412 depends on BUILD_BOOT
413 help
414 If METHOD=boot, location of boot-kernel config file
415 The config file will be copied to ${BUILD_DIR}/sources
416 and renamed 'bootkernel-config'
417 NOTE: this setting is required
418 #--- End CLFS specific params
419
420 #--- blfs-tool Support
421 config BLFS_TOOL
422 bool "Add blfs-tool support"
423 default n
424 depends on !BOOK_CLFS3 && !BOOK_BLFS
425 help
426 Activating this option will install additional packages needed
427 to use blfs tools after booting the new system.
428 The blfs-tool files will be installed under $BUILD_DIR/blfs_root
429 (see below).
430 After booting the new xLFS system, but before using the blfs tools,
431 you should create a user account, move the /blfs_root directory
432 to that user's home, and change its ownership to that of the user.
433 Also, be sure to give the user read and write access on the
434 $TRACKING_DIR directory and the files that it contains.
435 Don't forget to configure sudo properly on the new system.
436
437 config DUMMY # Avoid indenting the items below
438 bool
439
440 if BLFS_TOOL
441 menu "blfs-tool dependencies"
442
443 config DEP_LIBXML
444 bool "libxml2 (required)"
445 default y
446
447 config DEP_LIBXSLT
448 bool "libxslt (required)"
449 default y
450
451 config DEP_DBXML
452 bool "DocBook XML DTD (required)"
453 default y
454
455 config DEP_LYNX
456 bool "lynx (optional, for reading the generated book)"
457 default y
458
459 config DEP_SUDO
460 bool "sudo (recommended)"
461 default y
462
463 config DEP_WGET
464 bool "wget (recommended)"
465 default y
466
467 config DEP_GPM
468 bool "GPM (optional, see help)"
469 default n
470 help
471 if you install gpm, it will be started
472 automatically on boot. You'll have to edit
473 /etc/sysconfig/mouse for your system
474
475 config DEP_SVN
476 bool "SVN client (optional, see help)"
477 default n
478 help
479 Subversion is needed for updating the book
480 sources. If you want ssl support, select
481 OPENSSL below.
482
483 config DEP_OPENSSL
484 bool "OPENSSL (optional, see help)"
485 default n
486 help
487 selecting OPENSSL here allows to build
488 subversion with ssl support, avoiding a later
489 recompilation
490
491 config DEP_PYTHON
492 bool "PYTHON 2 (optional, see help)"
493 default n
494 help
495 selecting PYTHON 2 here allows to build
496 the libxml2 and libxslt python modules,
497 avoiding a later recompilation
498
499 endmenu
500
501 choice
502 prompt "BLFS Release"
503 default BLFS_SVN
504
505 config BLFS_SVN
506 bool "BLFS SVN"
507 help
508 Current development version as in trunk
509
510 config BLFS_WORKING_COPY
511 bool "BLFS working copy"
512 help
513 A local working copy of the BLFS book.
514
515 config BLFS_BRANCH
516 bool "BLFS Branch or stable book"
517 help
518 A supported SVN branch or stable book release
519 endchoice
520
521 config BLFS_WC_LOCATION
522 string "Location of the local BLFS working copy (mandatory)"
523 default "**EDIT ME**"
524 depends on BLFS_WORKING_COPY
525 help
526 Full path to the BLFS book working copy
527
528 config BLFS_BRANCH_ID
529 string "BLFS Book Version (mandatory)"
530 default "**EDIT ME**"
531 depends on BLFS_BRANCH
532 help
533 A list of valid branches and stable book IDs is available at
534 http://wiki.linuxfromscratch.org/alfs/wiki/SupportedBooks.
535 endif
536 #--- End blfs-tool Support
537
538 #--- BLFS params (Used for installing the tools, either after a jhalfs run
539 # or directly)
540 config BLFS_ROOT
541 string "Root of the tools directory (see help)"
542 default "/blfs_root"
543 depends on BLFS_TOOL || BOOK_BLFS
544 help
545 Path to the directory where all required files and scripts
546 will be stored.
547
548 This path must begin with a slash, and:
549 - is relative to the user's HOME directory when installing the
550 blfs tools on an already existing LFS system.
551 - is relative to the root of the build directory (`/' in chroot)
552 when adding the tools after a jhalfs run
553
554 CAUTION: this directory will be removed if it already exists.
555
556 config BLFS_XML
557 string "BLFS sources directory (internal parameter)"
558 default "blfs-xml"
559 depends BLFS_TOOL || BOOK_BLFS
560 help
561 The directory name under $BLFS_ROOT where the BLFS
562 book sources will be copied or checked out. Do not change that
563 unless you know what you are doing...
564
565 config LFS_XML
566 string "LFS sources directory (internal parameter)"
567 default "lfs-xml"
568 depends BLFS_TOOL || BOOK_BLFS
569 help
570 The directory name under $BLFS_ROOT where the LFS
571 book sources will be copied or checked out. Do not change that
572 unless you know what you are doing...
573
574 choice
575 prompt "LFS Release"
576 default LFS_SVN
577 depends BOOK_BLFS
578
579 config LFS_relSVN
580 bool "LFS SVN"
581 help
582 Current development version as in trunk
583
584 config LFS_WORKING_COPY
585 bool "LFS working copy"
586 help
587 A local working copy of the LFS book.
588
589 config LFS_BRANCH
590 bool "LFS Branch or stable book"
591 help
592 A supported SVN branch or stable book release
593 endchoice
594
595 config BLFS_LFS_BOOK
596 string "Location of the local LFS working copy (mandatory)"
597 default "**EDIT ME**"
598 depends on LFS_WORKING_COPY
599 help
600 Full path to the LFS book working copy"
601
602 config BLFS_LFS_BRANCH_ID
603 string "LFS Book Version (mandatory)"
604 default "**EDIT ME**"
605 depends on LFS_BRANCH
606 help
607 A list of valid branches and stable book IDs is available at
608 http://wiki.linuxfromscratch.org/alfs/wiki/SupportedBooks.
609 # End of BLFS parameters
610
611 #--- Custom Tools support
612 config CUSTOM_TOOLS
613 depends !BOOK_BLFS
614 bool "Add custom tools support"
615 default n
616 help
617 Activating this option additional packages you create
618 will be installed after finished the xLFS system build.
619 #--- End Custom Tools support
620
621 #--- This direcotry is needed for blfs tools installation and custom tools
622 # As well.
623 config TRACKING_DIR
624 string "Installed packages database directory"
625 default "/var/lib/jhalfs/BLFS"
626 depends on BOOK_BLFS || BLFS_TOOL || CUSTOM_TOOLS
627 help
628 Full path to the directory where the database of
629 installed packages will be created.
630
631 If the blfs tools are installed on a running xLFS system,
632 the user must have enough privileges to create this directory.
633 It may be necessary to create the /var/lib/jhalfs directory as
634 root, and make it writable by the user before running this tool.
635
636 If you are installing the blfs tools as part of an xLFS build
637 and/or using the customized scripts feature, you will
638 need to fix this directory's permissions after booting
639 the new system.
640
641 Note that the user that will build the packages must
642 have read and write access to this directory.
643
644#--- End BOOK Settings
645endmenu
646
647menu "General Settings"
648depends !BOOK_BLFS
649
650 #--- Set User Account
651 config CONFIG_USER
652 bool "Change the default user/group and homedir for this build"
653 default n
654 help #-- Unprivileged user and group name
655 # If you do not have the privilege to create/delete
656 # users and groups you can specify your own
657 # user ID for the build
658 #
659 # default values for each book
660 # LFS lfs
661 # CLFS* clfs
662 # HLFS hlfs
663 #
664 # Also, if your host places users' home dirs into a
665 # directory other than /home you can specify it here.
666
667 config DEF_USER
668 string
669 default "lfs" if BOOK_LFS || BOOK_LFS_SYSD
670 default "clfs" if BOOK_CLFS || BOOK_CLFS2 || BOOK_CLFS3
671 default "hlfs" if BOOK_HLFS
672
673 config SET_USER
674 string "User account"
675 depends CONFIG_USER
676 default DEF_USER
677
678 config CONFIG_GROUP
679 bool "Set Group?"
680 default n
681 depends CONFIG_USER
682
683 config SET_GROUP
684 string "GROUP account"
685 depends CONFIG_GROUP
686 default DEF_USER
687
688 config CONFIG_HOME
689 bool "Set home dir?"
690 default n
691 depends CONFIG_USER
692
693 config SET_HOME
694 string "Path to the directory under which the user's home directory will be created"
695 depends CONFIG_HOME
696 default "/home"
697
698 config LUSER
699 string
700 default DEF_USER if !CONFIG_USER
701 default SET_USER if CONFIG_USER
702
703 config LGROUP
704 string
705 default LUSER if !CONFIG_GROUP
706 default SET_GROUP if CONFIG_GROUP
707
708 config LHOME
709 string
710 default "/home" if !CONFIG_HOME
711 default SET_HOME if CONFIG_HOME
712 #--- End Set User Account
713
714 config BUILDDIR
715 string "Build Directory"
716 default "/mnt/build_dir"
717 help
718 #-- The directory where the created system will be located.
719 # NOTE: A working directory named jhalfs will be created
720 # here, so ensure this does not conflict with the jhalfs
721 # source directory.
722
723 config GETPKG
724 bool "Retrieve source files"
725 default n
726 help
727 #-- Download all packages and patches required by the selected book
728 # NOTE: Looks for files in the local archive defined by SRC_ARCHIVE
729 # first and if necessary retrieves them from the 'net.
730 # Files will be transferred to $BUILDDIR/sources.
731
732 config SRC_ARCHIVE
733 string "Package Archive Directory"
734 default "$SRC_ARCHIVE"
735 depends GETPKG
736 help
737 #-- A local archive for packages/files (not $BUILDDIR/sources)
738 # Any missing file will be downloaded and archived here,
739 # if the user has the right privileges.
740
741 config RETRYSRCDOWNLOAD
742 bool "Retry on 'connection refused' failure"
743 default n
744 depends GETPKG
745 help
746 #-- Attempt to download a source package again if it fails
747 # with a 'connection refused' error. This can happen on
748 # servers that are overloaded.
749
750 config RETRYDOWNLOADCNT
751 int "Number of retry attempts on download failures"
752 default 20
753 depends GETPKG
754 help
755 #-- Number of times to retry a failed download.
756
757 config DOWNLOADTIMEOUT
758 int "Download timeout (in seconds)"
759 default 30
760 depends GETPKG
761 help
762 #-- Number of seconds to wait for a download to start before
763 # timing out.
764
765 config SERVER
766 string "FTP mirror"
767 default "http://ftp.osuosl.org"
768 depends GETPKG
769 help
770 #-- FTP mirror to download packages and patches if not found
771 # in $SRC_ARCHIVE
772 # As a last resort, the files will downloaded from upstream,
773 # if possible.
774
775 config RUNMAKE
776 bool "Run the makefile"
777 default n
778 help
779 #-- Automatically run the makefile once it has been created
780
781 config CLEAN
782 bool "Rebuild files"
783 default n
784 help
785 #-- Clean the build directory before performing any other task.
786 # The directory is cleaned only if it was populated by a
787 # previous JHALFS run.
788
789#--- End General Settings
790endmenu
791
792menu "Build Settings"
793depends !BOOK_BLFS
794
795 #--- Test Suites
796 config CONFIG_TESTS
797 bool "Run testsuites"
798 depends !BOOK_CLFS2 && !BOOK_CLFS3
799 default y
800 help
801 #-- Run test suites
802 # If you select 'y' here:
803 # You will have to select between:
804 # - Only critical final system testsuites
805 # - All final system testsuites
806 # - Both temporary tools and final system testsuites
807 # You will be prompted also about the "flavour" of the
808 # testsuites run:
809 # - Don't stop on test suite failures
810 # - Abort the build at the first test suite failure
811 #
812 # Note that in any case, all the test instructions will
813 # be generated. Those which are not wanted will be commented
814 # out. If you select 'n' here, the commented test instructions
815 # do not stop on test suite failures.
816 #
817 # HLFS and CLFS have no testsuites available in the
818 # temporary tools phase
819
820 menu "Test settings"
821 depends CONFIG_TESTS
822 choice
823 prompt "Tests level"
824 default TST_1
825
826 config TST_1
827 bool "Only final system critical testsuites"
828 help
829 #-- Critical tests:
830 # Only Glibc, Binutils, GMP, MPFR, MPC and GCC
831 # testsuites for final system. The others are commented
832 # out.
833
834 config TST_2
835 bool "All final system testsuites"
836 help
837 #-- All final system test suites:
838 # Test instructions for the temporary tools (if available)
839 # are commented out.
840
841 config TST_3
842 bool "All testsuites" if !BOOK_HLFS && !BOOK_CLFS
843 help
844 #-- All tests:
845 # Runs all the testsuites for both temporary tools (if
846 # available) and final system
847 endchoice
848
849 choice
850 prompt "Flavour"
851
852 config NO_BOMB
853 bool "Don't stop on test failures"
854
855 config BOMB
856 bool "Abort the build on the first test failure"
857 endchoice
858
859 config TEST
860 int
861 default "0" if !CONFIG_TESTS
862 default "1" if TST_1
863 default "2" if TST_2
864 default "3" if TST_3
865
866 config BOMB_TEST
867 bool
868 default n if NO_BOMB
869 default y if BOMB
870
871 #--- End Test Suites
872 endmenu # test settings
873
874 #--- Package Management
875 config PKGMNGT
876 bool "Package management"
877 depends BOOK_LFS || BOOK_LFS_SYSD
878 default n
879 help
880 #-- Use package management
881 #
882 # If set, you'll have to choose between
883 # two package management styles:
884 # - Build and install:
885 # the packages in the final phase are built
886 # in a separate directory, PKG_DEST.
887 # You should provide a bash function for
888 # packaging and installing the package.
889 # - Preload a library before install:
890 # Run the install instructions inside a
891 # wrapper command, which monitors the
892 # installed files.
893 #
894 # Also, you have to provide the instructions
895 # to build the package manager during the
896 # temporary tools phase, in the form of a
897 # sect1 of the book identical to a package
898 # sect1. See README.PACKAGE_MANAGEMENT
899 #
900 # For now, this only works with LFS
901 choice
902 depends PKGMNGT
903 prompt "Package management style"
904 default PKG_PACK
905
906 config PKG_PACK
907 bool "Build and pack (pacman or dpkg style)"
908
909 config LIB_LOAD
910 bool "Preload a library before installing (porg style)"
911 endchoice
912
913 config WRAP_INSTALL
914 bool
915 default y if LIB_LOAD
916 default n if PKG_PACK
917 #--- End package management
918
919 #--- Installed files logs
920 config INSTALL_LOG
921 bool "Create a log of installed files for each package"
922 default n
923 help
924 #-- Select this if you want to create logs of the files
925 # installed by each package on the final system.
926
927 #--- End Installed files logs
928
929 config STRIP
930 bool "Strip Installed Binaries/Libraries"
931 default n
932 depends on !BOOK_CLFS3
933
934 config DEL_LA_FILES
935 bool "Remove libtool .la files"
936 default y
937 help
938 #-- Remove files libxxx.la installed by libtool. For a rationale
939 # see https://blog.flameeyes.eu/tags/lafiles/
940
941 config NO_PROGRESS_BAR
942 bool "DO NOT use/display progress_bar "
943 default n
944 help
945 #-- Do not use the progress bar routine. On slower machines
946 # this function consumes precious CPU cycles.
947
948#--- End Build Settings
949endmenu
950
951menu "System configuration"
952 depends !BOOK_BLFS
953
954 #--- FSTAB
955 config HAVE_FSTAB
956 bool "Use a custom fstab file"
957 default n
958 help
959 #-- Select this if you have an fstab file with entries
960 # for the target system
961
962 config FSTAB
963 string "Fstab file (optional)"
964 default "***EDIT ME***"
965 depends on HAVE_FSTAB
966 help
967 #-- The location of fstab file (if empty, a template is created)
968 #--- End FSTAB
969
970 #--- Kernel
971 config CONFIG_BUILD_KERNEL
972 bool "Build the kernel"
973 default n
974 help
975 #-- Select this option if you wish to build the kernel.
976 #
977 # You will be prompted for the full path to the .config
978 # file. It will be copied to the 'sources' directory and
979 # renamed kernel-config
980
981 config CONFIG
982 string "Kernel config file"
983 default "***EDIT ME***"
984 depends on CONFIG_BUILD_KERNEL
985 help
986 #-- Fully qualified path to a kernel config file
987 # The config file will be copied to ${BUILD_DIR}/sources
988 # and renamed 'kernel-config'
989 #--- End Kernel
990
991 config VIMLANG
992 bool "Install vim-lang package"
993 default n
994 depends on !BOOK_HLFS && !BOOK_CLFS3
995 help
996 #-- Install the optional vim-lang package
997 # NOTE: This option is obsolete with the 7.3 release of Vim
998 # which is included in all recent releases of LFS.
999
1000 config TIMEZONE
1001 string "TimeZone"
1002 default "GMT"
1003 help
1004 #-- The timezone as output by tzselect
1005 # This will be copied to /etc/localtime
1006
1007 config LANG
1008 string "Language"
1009 default "$LANG"
1010 help
1011 #-- LANG variable set in /etc/profile
1012 # See http://sourceware.org/git/?p=glibc.git;a=blob;f=localedata/SUPPORTED
1013 # for values (or the file localedata/SUPPORTED in glibc tarball)
1014
1015 config FULL_LOCALE
1016 bool "Install the full set of locales"
1017 default n
1018 help
1019 #-- If set to y, the full set of supported locales
1020 # will be installed. Otherwise, only the minimal set
1021 # necessary for the tests will be installed,
1022 # together with the locale associated with the
1023 # LANG you have chosen, if not in the minimal set.
1024
1025 #--- Groff page
1026 choice
1027 prompt "Groff page size"
1028 default PAGE_LETTER
1029 help
1030 #-- Page definition for groff: letter or A4
1031
1032 config PAGE_LETTER
1033 bool "letter"
1034
1035 config PAGE_A4
1036 bool "A4"
1037 endchoice
1038
1039 config PAGE
1040 string
1041 default "letter" if PAGE_LETTER
1042 default "A4" if PAGE_A4
1043 #--- End Groff page
1044
1045 config HOSTNAME
1046 string "Hostname (see help)"
1047 default "**EDITME**"
1048 help
1049 If you are on a public network, use the hostname given to you by
1050 your institution, or corporation, etc. If your network is private,
1051 that is, behind a firewall such as a box to connect to your ISP,
1052 you can choose anything you'd like. Combined with the domain name
1053 "local", you have the possibility to access your computer by name
1054 instead of address on the private network (see RFC 6762 and
1055 https://www.howtogeek.com/167190/).
1056
1057 menu "Network configuration"
1058 config INTERFACE
1059 string "netword card name"
1060 default "eth0"
1061 help
1062 eth0 is used in most cases. Virtual insterfaces may get other
1063 names (for example enp0s3 for the default network stack in qemu).
1064 Systemd may also rename network interfaces according to their
1065 bus addresses.
1066 config IP_ADDR
1067 string "Static IP address"
1068 default "10.0.2.9"
1069 help
1070 The default here is for a virtual interface in qemu. Private
1071 networks have addresses in the range 10.x.x.x or 192.169.x.x.
1072 You have to know your network prefix. Then the last figure
1073 may be anything you like.
1074
1075 config GATEWAY
1076 string "Gateway"
1077 default "10.0.2.2"
1078 help
1079 Again, this default is for a qemu network stack. Usually, the
1080 gateway is the address of your firewall.
1081 config PREFIX
1082 string "Subnet prefix"
1083 default "24"
1084 help
1085 Again, this default is for a qemu network stack, but is also
1086 the most used in private networks.
1087 config BROADCAST
1088 string "Broadcast address"
1089 default "10.0.2.255"
1090 config DOMAIN
1091 string "Domain name (see help)"
1092 default "local"
1093 help
1094 Domain Name:
1095 Doamin names are registered, so if your computer is on a public
1096 network, you cannot use any name you'd like. On a public
1097 network, you should have been given a domain name by
1098 your corporation, institution, etc.
1099 If your network is really private, that is behind a firewall
1100 such as a box for connecting to an ISP, you can choose any
1101 domain you'd like. You can also opt for "local", see RFC 6762,
1102 or "something.test", see RFC 6761.
1103 config DNS1
1104 string "Primary Name server"
1105 default "10.0.2.3"
1106 config DNS2
1107 string "Secondary Name server"
1108 default "8.8.8.8"
1109 endmenu # Network configuration
1110
1111 menu "Console configuration"
1112 config FONT
1113 string "Console font"
1114 default "lat0-16"
1115 config FONTMAP
1116 string "Font map (-m option to setfont)"
1117 default "8859-1"
1118 config UNICODE
1119 bool "Unicode mode"
1120 default y
1121 config KEYMAP
1122 string "Keymap name"
1123 default "us"
1124 endmenu # Console configuration
1125
1126endmenu #--- System configuration
1127
1128menu "Advanced Features"
1129depends !BOOK_BLFS
1130
1131 config REPORT
1132 bool "Create SBU and disk usage report"
1133 default y
1134
1135 #--- ICA/farce
1136 config COMPARE
1137 bool "Run comparison analysis on final stage"
1138 depends !BOOK_CLFS2 && !BOOK_CLFS3
1139 default n
1140 help
1141 #-- Should an iterative comparison analysis be performed?
1142 #
1143 # Unless you are familiar with ICA and/or FARCE do not
1144 # select this option
1145 #
1146 # ICA and FARCE are analysis tools for comparing one
1147 # build to the next. Builds mays differ from one iteration
1148 # to another due to the build order and these tools try
1149 # to ferret out those differences by examining the stored
1150 # build logs and binary files.
1151 #
1152 # The scripts are well commented and can be found in ./extras/*
1153 #
1154
1155 config ITERATIONS
1156 int "Number of test runs (2,3,4,5)" if COMPARE
1157 depends on COMPARE
1158 range 2 5
1159 default 3
1160
1161 config RUN_ICA
1162 bool "ICA testing"
1163 depends on COMPARE
1164 default y
1165 help
1166 #-- Run ICA testing
1167
1168 config RUN_FARCE
1169 bool "farce testing"
1170 depends on COMPARE
1171 default n
1172 help
1173 #-- Run farce testing
1174 #--- End ICA/farce
1175
1176 #--- Optimizations
1177if !BOOK_CLFS2 && !BOOK_CLFS3
1178 config CONFIG_OPTIMIZE
1179 bool "Optimization and parallelization"
1180 default n
1181 help
1182 # Opens a menu for various optimization settings:
1183 # Actual optimization flags MUST be defined in ./optimize/*
1184 # before activating this option.
1185 #
1186 # WARNING: The use of build optimizations may lead to build issues.
1187 # If the system doesn't work as expected, please rebuild
1188 # without optimizations before asking for support.
1189 menu "Optimization settings"
1190 depends on CONFIG_OPTIMIZE
1191
1192 config N_PARALLEL
1193 int "Number of parallel `make' jobs"
1194 default 1
1195 help
1196 #-- The usual recommandation is (number of CPU cores)+1
1197 # Do not set for meaningful SBU calculations.
1198
1199 choice
1200 prompt "Optimization level "
1201 default OPT_1
1202 help
1203 #-- Optimization values are set in optimize/* files
1204
1205 config OPT_1
1206 bool "Final system only"
1207
1208 config OPT_2
1209 bool "Both temp tools and final system"
1210
1211 config OPT_3
1212 bool "Cross tools (only MAKEFLAGS), temp tools and final system" if BOOK_CLFS
1213 endchoice
1214
1215 config REALSBU
1216 bool "Build Binutls pass1 without optimization (Real SBU)"
1217 depends on (BOOK_LFS || BOOK_LFS_SYSD) && OPT_2
1218 default n
1219 help
1220 #-- Use -j1 in make invokation for Binutils pass1 to
1221 # get a valid SBU value.
1222
1223endmenu
1224 config OPTIMIZE
1225 int
1226 default "0" if !CONFIG_OPTIMIZE
1227 default "1" if OPT_1
1228 default "2" if OPT_2
1229 default "3" if OPT_3
1230endif
1231
1232 #--- End Optimizations
1233
1234 #-- Internal Settings
1235 menu "Internal Settings (WARNING: for jhalfs developers only)"
1236
1237 config SCRIPT_ROOT
1238 string "Scripts root"
1239 default "jhalfs"
1240
1241 config JHALFSDIR
1242 string "jhalfs directory"
1243 default "$BUILDDIR/$SCRIPT_ROOT"
1244
1245 config LOGDIRBASE
1246 string "Build logs directory basename"
1247 default "logs"
1248
1249 config LOGDIR
1250 string "Build logs directory"
1251 default "$JHALFSDIR/$LOGDIRBASE"
1252
1253 config TESTLOGDIRBASE
1254 string "Test suites logs directory basename"
1255 default "test-logs"
1256
1257 config TESTLOGDIR
1258 string "Test suites logs directory"
1259 default "$JHALFSDIR/$TESTLOGDIRBASE"
1260
1261 config FILELOGDIRBASE
1262 string "Installed files logs directory basename"
1263 default "installed-files"
1264
1265 config FILELOGDIR
1266 string "Installed files logs directory"
1267 default "$JHALFSDIR/$FILELOGDIRBASE"
1268
1269 config ICALOGDIR
1270 string "ICA logs directory"
1271 default "$LOGDIR/ICA"
1272
1273 config FARCELOGDIR
1274 string "farce logs directory"
1275 default "$LOGDIR/farce"
1276
1277 config MKFILE
1278 string "Makefile"
1279 default "$JHALFSDIR/Makefile"
1280
1281 config XSL
1282 string "XSL stylesheet"
1283 default "$PROGNAME.xsl"
1284
1285 config PKG_LST
1286 string "Package contents list"
1287 default "unpacked"
1288
1289 #--- End Internal Settings
1290 endmenu
1291
1292#--- End Advanced Features
1293endmenu
1294
1295config REBUILD_MAKEFILE
1296 depends !BOOK_BLFS
1297 bool "Rebuild the Makefile (see help)"
1298 default n
1299 help
1300 #-- Rebuild the Makefile
1301 #
1302 # This option allows to rebuild the Makefile after
1303 # customizing the base system build scripts.
1304 #
1305 # See README.CUSTOM for more info about this feature.
1306
Note: See TracBrowser for help on using the repository browser.