#!/bin/sh
set -e	# Enable error trapping
set -u	# Trap undefined variables.. Forces the programmer
		# to define a variable before using it

#
# Load the configuration file
#
source jhahlfs.conf

# VT100 colors
declare -r  BLACK=$'\e[1;30m'
declare -r  DK_GRAY=$'\e[0;30m'

declare -r  RED=$'\e[31m'
declare -r  GREEN=$'\e[32m'
declare -r  YELLOW=$'\e[33m'
declare -r  BLUE=$'\e[34m'
declare -r  MAGENTA=$'\e[35m'
declare -r  CYAN=$'\e[36m'
declare -r  WHITE=$'\e[37m'

declare -r  OFF=$'\e[0m'
declare -r  BOLD=$'\e[1m'
declare -r  REVERSE=$'\e[7m'
declare -r  HIDDEN=$'\e[8m'

declare -r  tab_=$'\t'
declare -r  nl_=$'\n'

declare -r   DD_BORDER="${BOLD}${WHITE}==============================================================================${OFF}"
declare -r   SD_BORDER="${BOLD}${WHITE}------------------------------------------------------------------------------${OFF}"
declare -r STAR_BORDER="${BOLD}${WHITE}******************************************************************************${OFF}"

# bold yellow > <  pair
declare -r R_arrow=$'\e[1;33m>\e[0m'
declare -r L_arrow=$'\e[1;33m<\e[0m'


# START predefine some internal vars.. proper programming style

  # If the var BOOK contains something then, maybe, it points
  # to a working doc.. set WC=1, else 'null'
WC=${BOOK:+1}

CLEAN=0		# Clean out build dir?
DL=			# The download app to use
PREV=		# name of previous script processed
chapter5=
chapter6=
chapter7=

# END predefined vars section

_inline_doc="
${GREEN}
     This script, jhahlfs, strives to generate an accurate makefile
   directly from the xml files used to generated the Hardened Linux From
   Scratch document.
     The usage of this script assumes you have read and are familiar with
   the book and therefore the configuration variables found in jhahlfs.conf
   will have meaning to you. There are a limited number of command line
   switches which, if used, will override the config file settings.

   NOTES::
   *.  The resulting Makefile takes considerable time to run to completion,
   lay in a supply of caffeine beverages.

   *.  The document, Hardened Linux From Scratch, specifies a Linux kernel
   >=2.6.2 and GCC >=3.0 for proper compilation.

   *.  It is recommended that you temporarily unpack your linux kernel and
   run <make menuconfig> and configure the kernal as per the book and save
   the resulting .config file.

   *.  Chapter07 contains numerous command files which require customizing
   before you start 129-console, 131-profile, 133-hosts, 134-network,
   135-fstab, 136-kernel.
${OFF}"

version="
jhahlfs development \$Date$

Written by George Boudreau

Based on the jhalfs code written by Jeremy Huntwork and Manuel Canales Esparcia.

This program is published under the ${WHITE}Gnu General Public License, Version 2.${OFF}
"

usage() {
    'clear'
cat <<- -EOF-
${DD_BORDER}
${BOLD}
${WHITE} Usage: $0 ${YELLOW}[OPTION]
${CYAN}
Options:
${YELLOW}  -h, --help
${CYAN}        print this help, then exit
${YELLOW}  --readme
${CYAN}        print a small readme file, then exit
${YELLOW}  -V, --version
${CYAN}        print version number, then exit
${YELLOW}  -d  --directory DIR
${CYAN}        use DIR directory for building HLFS; all files jhahlfs produces will be
        in the directory DIR/jhahlfs. Default is \"/mnt/lfs\".
${YELLOW}  --rebuild
${CYAN}        clean the build directory before to perfom any other task. The directory
         is cleaned only if it was populated by a previous jhahlfs run.
${YELLOW}  -P, --get-packages
${CYAN}        download the packages and patches. This assumes that the server declared in the
        jhahlfs.conf file has the proper packages and patches for the book version being
        processed.
${YELLOW}  -W, --working-copy DIR
${CYAN}        use the local working copy placed in DIR as the HLFS book
${YELLOW}  -L, --HLFS-version VER
${CYAN}        checkout VER version of the HLFS book. Supported versions at this time are:
        dev* | trunk | SVN     aliases for Development HLFS
${YELLOW}  --fstab FILE
${CYAN}        use FILE as the /etc/fstab file for the HLFS system. If not specified,
        a default /etc/fstab file with dummy values is created.
${YELLOW}  -C, --kernel-config FILE
${CYAN}        use the kernel configuration file specified in FILE to build the kernel.
        if the file is not found, or if not specified, the kernel build is skipped.
${YELLOW}  -M, --run-make
${CYAN}        run make on the generated Makefile
${DD_BORDER}
-EOF-
	exit
}


help="\
Try '$0 --help' for more information."

no_empty_builddir() {
	'clear'
cat <<- -EOF-
${DD_BORDER}

${tab_}${tab_}${RED}W A R N I N G${OFF}
${GREEN}
    Looks like the \$BUILDDIR directory contains subdirectories
    from a previous HLFS build.

    Please format the partition mounted on \$BUILDDIR or set
    a different build directory before running jhahlfs.
${OFF}
${DD_BORDER}
-EOF-
	exit
}

exit_missing_arg="\
echo \"Option '\$1' requires an argument\" >&2
echo \"\$help\" >&2
exit 1"

no_dl_client="\
echo \"Could not find a way to download the HLFS sources.\" >&2
echo \"Attempting to continue.\" >&2"

HEADER="# This file is automatically generated by jhahlfs
# DO NOT EDIT THIS FILE MANUALLY
#
# Generated on `date \"+%F %X %Z\"`"

#>>>>>>>>>>>>>>>ERROR TRAPPING >>>>>>>>>>>>>>>>>>>>
#-----------------------#
simple_error() {        # Basic error trap.... JUST DIE
#-----------------------#
    # If +e then disable text output
    if [[ "$-" =~ "e" ]]; then
	echo -e "\n${RED}ERROR:${GREEN} basic error trapped!${OFF}\n" >&2
    fi
}

see_ya() {
    echo -e "\n\t${BOLD}${WHITE}Goodbye and thank you for choosing ${YELLOW}JHAHLFS\n${OFF}"
}
#####	Simple error TRAPS
#	ctrl-c   SIGINT
#	ctrl-y
#	ctrl-z   SIGTSTP
#	SIGHUP   1 HANGUP
#	SIGINT   2 INTRERRUPT FROM KEYBOARD Ctrl-C
#	SIGQUIT  3
#	SIGKILL  9 KILL
#	SIGTERM 15 TERMINATION
#	SIGSTOP 17,18,23 STOP THE PROCESS
#####
set -e
trap see_ya 0
trap simple_error ERR
trap 'echo -e "\n\n${RED}INTERRUPT${OFF} trapped\n" &&  exit 2'  1 2 3 15 17 18 23
#>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>


###################################
###          FUNCTIONS          ###
###################################

#----------------------------#
check_requirements() {       # Simple routine to validate gcc and kernel versions against requirements
#----------------------------#
	# Minimum values acceptable
	#   bash	3.0>
	#    gcc	3.0>
	# kernel	2.6.2>

	[[ $1 = "1" ]] && echo "${nl_}BASH: ${L_arrow}${GREEN}${BASH_VERSION}${R_arrow}"
	case $BASH_VERSION in
		[3-9].*) ;;
		*) 'clear'
			echo -e "
$DD_BORDER
\t\t${OFF}${RED}BASH version ${BOLD}${YELLOW}-->${WHITE} $BASH_VERSION ${YELLOW}<--${OFF}${RED} is too old.
\t\t    This script requires 3.0${OFF}${RED} or greater
$DD_BORDER"
			exit 1
			;;
	esac

	[[ $1 = "1" ]] && echo "GCC: ${L_arrow}${GREEN}`gcc -dumpversion`${R_arrow}"
    case `gcc -dumpversion` in
		[3-9].[0-9].* ) ;;
		*)  'clear'
			echo -e "
$DD_BORDER
\t\t${OFF}${RED}GCC version ${BOLD}${YELLOW}-->${WHITE} $(gcc -dumpversion) ${YELLOW}<--${OFF}${RED} is too old.
\t\t This script requires ${BOLD}${WHITE}3.0${OFF}${RED} or greater
$DD_BORDER"
			exit 1
		;;
    esac

	#
	# >>>> Check kernel version against the minimum acceptable level <<<<
	#
	[[ $1 = "1" ]] && echo "LINUX: ${L_arrow}${GREEN}`uname -r`${R_arrow}"

	local IFS
	declare -i major minor revision change
	min_kernel_vers=2.6.2

	IFS=".-"   # Split up w.x.y.z as well as w.x.y-rc  (catch release candidates)
	set -- $min_kernel_vers # set postional parameters to minimum ver values
	major=$1; minor=$2; revision=$3
	#
	set -- `uname -r` # Set postional parameters to user kernel version
	#Compare against minimum acceptable kernel version..
	(( $1  > major )) && return
	(( $1 == major )) && (((  $2 >  minor )) ||
						 ((( $2 == minor )) && (( $3 >= revision )))) && return

	# oops.. write error msg and die
	echo -e "
$DD_BORDER
\t\t${OFF}${RED}The kernel version ${BOLD}${YELLOW}-->${WHITE} $(uname -r) ${YELLOW}<--${OFF}${RED} is too old.
\t\tThis script requires version ${BOLD}${WHITE}$min_kernel_vers${OFF}${RED} or greater
$DD_BORDER"
	exit 1
}


#----------------------------#
validate_config()    {       # Are the config values sane (within reason)
#----------------------------#
	local -r PARAM_LIST="BUILDDIR HPKG MODEL TEST TOOLCHAINTEST STRIP VIMLANG PAGE GRSECURITY_HOST RUNMAKE"
	local -r ERROR_MSG='${OFF}${RED}The variable \"${GREEN}${config_param}${RED}\" value ${BOLD}${YELLOW}--\>${WHITE}${!config_param}${YELLOW}\<--${OFF}${RED} is invalid, check the config file ${GREEN}\<jhahlfs.conf\>${OFF}'
	local -r PARAM_VALS='${WHITE}${config_param}: ${L_arrow}${GREEN}${!config_param}${R_arrow}'
	local config_param
	local validation_str

	write_error_and_die() {
		echo -e "\n${DD_BORDER}"
		   echo "`eval echo ${ERROR_MSG}`" >&2
		echo -e "${DD_BORDER}\n"
		exit 1
	}
	set +e
	for config_param in $PARAM_LIST; do
		[[ $1 = "1" ]] && echo -e "`eval echo $PARAM_VALS`"
		case $config_param in
			BUILDDIR)	# We cannot have an <empty> or </> root mount point
						if [[ "xx x/x" =~ "x${!config_param}x" ]]; then
							write_error_and_die
						fi
						continue	;;
			HPKG)			validation_str="x0x x1x"	;;
			RUNMAKE)		validation_str="x0x x1x"	;;
			TEST)			validation_str="x0x x1x"	;;
			STRIP)			validation_str="x0x x1x"	;;
			VIMLANG)		validation_str="x0x x1x"	;;
			TOOLCHAINTEST)	validation_str="x0x x1x"	;;
			GRSECURITY_HOST)	validation_str="x0x x1x"	;;

			MODEL)		validation_str="xglibcx xuclibcx"	;;
			PAGE)		validation_str="xletterx xA4x" 	;;
			*)
				echo "WHAT PARAMETER IS THIS.. <<${config_param}>>"
				exit
			;;
		esac
		# This is the 'regexp' test available in bash-3.0..
		# using it as a poor man's test for substring
		if [[ ! "${validation_str}" =~ "x${!config_param}x" ]] ; then
			# parameter value entered is no good
			write_error_and_die
		fi
	done # for loop

	for config_param in LC_ALL LANG; do
		[[ $1 = "1" ]] && echo "`eval echo $PARAM_VALS`"
		[[ -z "${!config_param}" ]] && continue
		# See it the locale values exist on this machine
		[[ "`locale -a | grep -c ${!config_param}`" > 0 ]] && continue

		# If you make it this far then there is a problem
		write_error_and_die
	done

	for config_param in FSTAB CONFIG KEYMAP BOOK; do
		[[ $1 = "1" ]] && echo "`eval echo $PARAM_VALS`"
		# If this is not a working copy, ie the default book, then skip
		[[ -z $WC ]] && continue
		[[ -z "${!config_param}" ]] && continue
		[[ -e "${!config_param}" ]] && [[ -s "${!config_param}" ]] && continue

		# If you make it this far then there is a problem
		write_error_and_die
	done

	set -e
	echo "$tab_${BOLD}${YELLOW} Config parameters look good${OFF}${nl_}"
}


#----------------------------#
build_patches_file() {       # Supply a suitably formated list of patches.
#----------------------------#
    local saveIFS=$IFS

    LOC_add_patches_entry() {
	for f in `grep "/$1-" patcheslist_.wget`; do
	    basename $f | sed "s|${2}|\&${1}-version;|" >> patches
	done
    }

    xsltproc --nonet \
			 --xinclude \
			 -o patcheslist_.wget \
			 hlfs-patcheslist_.xsl \
			$BOOK/index.xml > /dev/null 2>&1

    rm -f patches

    IFS=$'\x0A'  # Modify the 'internal field separator' to break on 'LF' only
    for f in `cat packages`; do
	IFS=$saveIFS
	LOC_add_patches_entry \
		`echo $f | sed -e 's/-version//' \
					   -e 's/-file.*//' \
					   -e 's/"//g' \
					   -e 's/uclibc/uClibc/'`
    done

	# .... U G L Y .... what to do with the grsecurity patch to the kernel..
	for f in `grep "/grsecurity-" patcheslist_.wget`; do
	    basename $f >> patches
	done

    IFS=$saveIFS
    rm -f patcheslist_.wget
}


#----------------------------#
clean_builddir() {           #
#----------------------------#
  # Test if the clean must be done.
  if [ "$CLEAN" = "1" ] ; then
    # Test to make sure we're running the clean as root
    if [ "$UID" != "0" ] ; then
      echo "You must be logged in as root to clean the build directory."
      exit 1
    fi
    # Test to make sure that the build directory was populated by jhahlfs
    if [ ! -d $JHAHLFSDIR ] || [ ! -d $BUILDDIR/sources ] ; then
      echo "Looks like $BUILDDIR was not populated by a previous jhahlfs run."
      exit 1
    else
      # Clean the build directory
      echo -ne "Cleaning $BUILDDIR...\n"
      rm -rf $BUILDDIR/{bin,boot,dev,etc,home,lib,media,mnt,opt,proc,root,sbin,srv,sys,tmp,tools,usr,var}
      echo -ne "Cleaning $JHAHLFSDIR...\n"
      rm -rf $JHAHLFSDIR/{0*,1*,envars,sources-dir,commands,logs,Makefile,dump-hlfs-scripts.xsl,hlfs-functions,packages,patches}
      echo -ne "Cleaning remainig extracted sources in $BUILDDIR/sources...\n"
      rm -rf `find $BUILDDIR/sources/* -maxdepth 0 -type d`
      echo -ne "done\n"
    fi
  fi
}

#----------------------------#
get_book() {                 #
#----------------------------#
  cd $JHAHLFSDIR

  if [ -z $WC ] ; then
    # Check for Subversion instead of just letting the script hit 'svn' and fail.
    test `type -p svn` || eval "echo \"This feature requires Subversion.\"
    exit 1"

    echo -n "Downloading the HLFS Book, version $HLFSVRS... "
	# Grab a fresh HLFS book if it's missing, otherwise, update it from the
	# repo. If we've already extracted the commands, move on to getting the
	# sources.
	if [ -d hlfs-$HLFSVRS ] ; then
	    cd hlfs-$HLFSVRS
	    if LC_ALL=C svn up | grep -q At && \
		test -d $JHAHLFSDIR/commands && \
		test -f $JHAHLFSDIR/packages && \
		test -f $JHAHLFSDIR/patches ; then
		echo -ne "done\n"
    		# Set the canonical book version
		cd $JHAHLFSDIR
		VERSION=`grep "ENTITY version " $BOOK/general.ent | sed 's@<!ENTITY version "@@;s@">@@'`
		get_sources
	    else
    		echo -ne "done\n"
    		extract_commands
	    fi
	else
	    case $HLFSVRS in
		development)
	           svn co $SVN/HLFS/trunk/BOOK hlfs-$HLFSVRS >>$LOGDIR/$LOG 2>&1
		    ;;
		*) echo -e "${RED}Invalid document version selected${OFF}"
		    ;;
	    esac
	    echo -ne "done\n"
	    extract_commands
	fi
  else
	echo -ne "Using $BOOK as book's sources ...\n"
        extract_commands
  fi
}

#----------------------------#
extract_commands() {         #
#----------------------------#
	# Check for libxslt instead of just letting the script hit 'xsltproc' and fail.
	test `type -p xsltproc` || eval "echo \"This feature requires libxslt.\"
	exit 1"

	cd $JHAHLFSDIR
	VERSION=`grep "ENTITY version " $BOOK/general.ent | sed 's@<!ENTITY version "@@;s@">@@'`

	# Start clean
	if [ -d commands ]; then
		rm -rf commands
		mkdir -v commands
	fi
	echo -n "Extracting commands..."

	# Dump the commands in shell script form from the HLFS book.
	xsltproc  --nonet \
			  --xinclude \
			  --stringparam model $MODEL \
			  --stringparam testsuite $TEST \
			  --stringparam toolchaintest $TOOLCHAINTEST \
			  --stringparam vim-lang $VIMLANG \
			  -o ./commands/ $XSL $BOOK/index.xml >>$LOGDIR/$LOG 2>&1

	# Make the scripts executable.
	chmod -R +x $JHAHLFSDIR/commands

	# Grab the patches and package names.
	cd $JHAHLFSDIR
	for i in patches packages ; do rm -f $i ; done
	grep "\-version" $BOOK/general.ent | sed -e 's@<!ENTITY @@' -e 's@">@"@' \
	-e '/generic/d' >> packages

	# Download the vim-lang package if it must be installed
	if [ "$VIMLANG" = "1" ] ; then
		echo `grep "vim" packages | sed 's@vim@&-lang@'` >> packages
	fi
	echo `grep "udev-config-file" $BOOK/general.ent | sed -e 's@<!ENTITY @@' -e 's@">@"@'` >> packages

	# There is no HLFS patches.ent file so we will create one.
	build_patches_file
#  grep "ENTITY" $BOOK/patches.ent | sed -e 's/.* "//' -e 's/">//' >> patches

	# Done. Moving on...
	echo -ne "done\n"
	get_sources
}

#----------------------------#
download() {                 # Download file, write name to MISSING_FILES.DMP if an error
#----------------------------#
  cd $BUILDDIR/sources

	# Hackish fix for the bash-doc, glibc-{linuxthreads,libidn} and
	# module-init-tools-testsuite packages that don't conform to
	# norms in the URL scheme.
	DIR=`echo $1 | sed 's@-doc@@;s@-linuxthreads@@;s@-libidn@@;s@-testsuite@@'`

	# Find the md5 sum for this package.
	if [ $2 != MD5SUMS ] ; then
		set +e
		MD5=`grep "  $2" MD5SUMS`
		if [ $? -ne 0 ]; then
			set -e
			echo "${RED}$2 not found in MD5SUMS${OFF}"
			echo "$2 not found in MD5SUMS" >> MISSING_FILES.DMP
			return
	    fi
    	set -e
	fi

	if [ ! -f $2 ] ; then
		case $DL in
			wget )  wget $HTTP/$DIR/$2						;;
			curl )  `curl -# $HTTP/$DIR/$2 -o $2`			;;
			* )     echo "$DL not supported at this time."	;;
		esac
	elif ! echo "$MD5" | md5sum -c - >/dev/null 2>/dev/null ; then
		case $DL in
			wget )	wget -c $HTTP/$DIR/$2					;;
			curl )	`curl -# -C - $HTTP/$DIR/$2 -o $2`		;;
			* )		echo "$DL not supported at this time."	;;
		esac
	fi

	if [ $2 != MD5SUMS ] && ! echo "$MD5" | md5sum -c - ; then
		exit 1
	fi
	if [ $2 != MD5SUMS ] ; then
		echo `grep "$MD5" MD5SUMS` >> MD5SUMS-$VERSION
	fi
}


#----------------------------#
get_sources() {              #
#----------------------------#
    local IFS

	# Test if the packages must be downloaded
	if [ ! "$HPKG" = "1" ] ; then
  		return
	fi

    # Modify the 'internal field separator' to break on 'LF' only
	IFS=$'\x0A'

	if [ ! -d $BUILDDIR/sources ] ; then mkdir $BUILDDIR/sources ; fi
	cd $BUILDDIR/sources

	> MISSING_FILES.DMP  # Files not in md5sum end up here

	if [ -f MD5SUMS ] ; then rm MD5SUMS ; fi
	if [ -f MD5SUMS-$VERSION ] ; then rm MD5SUMS-$VERSION ; fi

	# Retrieve the master md5sum file
	download "" MD5SUMS

	# Iterate through each package and grab it, along with any patches it needs.
	for i in `cat $JHAHLFSDIR/packages` ; do
      PKG=`echo $i | sed -e 's/-version.*//' \
						 -e 's/-file.*//' \
						 -e 's/uclibc/uClibc/' `

	  # Needed for Groff patchlevel patch on UTF-8 branch
	  GROFFLEVEL=`grep "groff-patchlevel" $JHAHLFSDIR/packages | sed -e 's/groff-patchlevel //' -e 's/"//g'`

	  #
	  # How to deal with orphan packages..??
	  #
	  VRS=`echo $i | sed -e 's/.* //' -e 's/"//g'`
	  case "$PKG" in
		"expect-lib" )			continue ;; # not valid packages
		"linux-dl" )			continue ;;
		"groff-patchlevel" )	continue ;;
		"uClibc-patch" )		continue ;;

		"tcl" )			FILE="$PKG$VRS-src.tar.bz2" 			; download $PKG $FILE	;;
		"vim-lang" )	FILE="vim-$VRS-lang.tar.bz2"; PKG="vim"	; download $PKG $FILE	;;
		"udev-config" )	FILE="$VRS" ; PKG="udev" 				; download $PKG $FILE	;;

		"uClibc-locale" ) FILE="$PKG-$VRS.tar.bz2" ; PKG="uClibc"
						  download $PKG $FILE
						  # There can be no patches for this file
						  continue ;;

		"gcc" )		download $PKG "gcc-core-$VRS.tar.bz2"
					download $PKG "gcc-g++-$VRS.tar.bz2"
			;;
		"glibc")	download $PKG "$PKG-$VRS.tar.bz2"
					download $PKG "$PKG-libidn-$VRS.tar.bz2"
			;;
		* )			FILE="$PKG-$VRS.tar.bz2"
					download $PKG $FILE
			;;
      esac

      for patch in `grep "$PKG-&$PKG" $JHAHLFSDIR/patches` ; do
        PATCH=`echo $patch | sed 's@&'$PKG'-version;@'$VRS'@'`
        download $PKG $PATCH
      done

    done

	# .... U G L Y .... what to do with the grsecurity patch to the kernel..
	download grsecurity `grep grsecurity $JHAHLFSDIR/patches`

	# .... U G L Y .... deal with uClibc-locale-xxxxx.tar.bz2 format issue.
	bzcat uClibc-locale-030818.tar.bz2 | gzip > uClibc-locale-030818.tgz

	if [[ -s $BUILDDIR/sources/MISSING_FILES.DMP ]]; then
		echo  -e "\n\n${tab_}${RED} One or more files were not retrieved.\n${tab_} Check <MISSING_FILES.DMP> for names ${OFF}\n\n"
	fi
}


#----------------------------#
_IS_() {                     # Function to test build scripts names
#----------------------------#
  # Returns substr $2 or null str
  # Must use string testing
  case $1 in
    *$2*) echo "$2" ;;
       *) echo ""   ;;
  esac
}

#----------------------------#
chapter4_Makefiles() {       # Initialization of the system
#----------------------------#
    local TARGET LOADER

    echo  "${YELLOW}	Processing Chapter-4 scripts ${OFF}"

	# Define a few model dependant variables
	if [[ ${MODEL} = "uclibc" ]]; then
	  TARGET="tools-linux-uclibc"; LOADER="ld-uClibc.so.0"
	else
	  TARGET="tools-linux-gnu";    LOADER="ld-linux.so.2"
    fi

	# 022-
	# If /home/hlfs is already present in the host, we asume that the
	# hlfs user and group are also presents in the host, and a backup
	# of their bash init files is made.
(
cat << EOF
020-creatingtoolsdir:
	@\$(call echo_message, Building)
	@mkdir -v \$(HLFS)/tools && \\
	rm -fv /tools && \\
	ln -sv \$(HLFS)/tools /
	@if [ ! -d \$(HLFS)/sources ]; then \\
		mkdir \$(HLFS)/sources; \\
	fi;
	@chmod a+wt \$(HLFS)/sources && \\
	touch \$@

021-addinguser:  020-creatingtoolsdir
	@\$(call echo_message, Building)
	@if [ ! -d /home/hlfs ]; then \\
		groupadd hlfs; \\
		useradd -s /bin/bash -g hlfs -m -k /dev/null hlfs; \\
	else \\
		touch user-hlfs-exist; \\
	fi;
	@chown hlfs \$(HLFS)/tools && \\
	chown hlfs \$(HLFS)/sources && \\
	touch \$@

022-settingenvironment:  021-addinguser
	@\$(call echo_message, Building)
	@if [ -f /home/hlfs/.bashrc -a ! -f /home/hlfs/.bashrc.XXX ]; then \\
		mv -v /home/hlfs/.bashrc /home/hlfs/.bashrc.XXX; \\
	fi;
	@if [ -f /home/hlfs/.bash_profile  -a ! -f /home/hlfs/.bash_profile.XXX ]; then \\
		mv -v /home/hlfs/.bash_profile /home/hlfs/.bash_profile.XXX; \\
	fi;
	@echo "set +h" > /home/hlfs/.bashrc && \\
	echo "umask 022" >> /home/hlfs/.bashrc && \\
	echo "HLFS=/mnt/hlfs" >> /home/hlfs/.bashrc && \\
	echo "LC_ALL=POSIX" >> /home/hlfs/.bashrc && \\
	echo "PATH=/tools/bin:/bin:/usr/bin" >> /home/hlfs/.bashrc && \\
	echo "export HLFS LC_ALL PATH" >> /home/hlfs/.bashrc && \\
	echo "" >> /home/hlfs/.bashrc && \\
	echo "target=$(uname -m)-${TARGET}" >> /home/hlfs/.bashrc && \\
	echo "ldso=/tools/lib/${LOADER}" >> /home/hlfs/.bashrc && \\
	echo "export target ldso" >> /home/hlfs/.bashrc && \\
	echo "source $JHAHLFSDIR/envars" >> /home/hlfs/.bashrc && \\
	chown hlfs:hlfs /home/hlfs/.bashrc && \\
	touch envars && \\
	touch \$@
EOF
) >> $MKFILE.tmp

}

#----------------------------#
chapter5_Makefiles() {       # Bootstrap or temptools phase
#----------------------------#

	echo "${YELLOW}	Processing Chapter-5 scripts${OFF}"

  for file in chapter05/* ; do
    # Keep the script file name
    this_script=`basename $file`

    # Skip this script depending on jhahlfs.conf flags set.
	case $this_script in
	    	# If no testsuites will be run, then TCL, Expect and DejaGNU aren't needed
		*tcl* )		[[ "$TOOLCHAINTEST" = "0" ]] && continue; ;;
		*expect* )	[[ "$TOOLCHAINTEST" = "0" ]] && continue; ;;
		*dejagnu* )	[[ "$TOOLCHAINTEST" = "0" ]] && continue; ;;
			# Test if the stripping phase must be skipped
		*stripping* )	[[ "$STRIP" = "0" ]] && continue ;;
			# Select the appropriate library
		*glibc*)		[[ ${MODEL} = "uclibc" ]] && continue ;;
		*uclibc*)		[[ ${MODEL} = "glibc" ]]  && continue ;;
		*) ;;
	esac

	# First append each name of the script files to a list (this will become
	# the names of the targets in the Makefile
	chapter5="$chapter5 $this_script"

	# Grab the name of the target (minus the -headers or -cross in the case of gcc
	# and binutils in chapter 5)
	name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@' -e 's@-cross@@' -e 's@-headers@@'`

	# >>>>>>>>>> U G L Y <<<<<<<<<
	# Adjust 'name' and patch a few scripts on the fly..
	case $name in
	linux-libc) name=linux-libc-headers
	 	;;
	uclibc) # this sucks as method to deal with gettext/libint inside uClibc
		sed 's@^cd gettext-runtime@cd ../gettext-*/gettext-runtime@' -i chapter05/$this_script
		;;
	gcc) # to compensate for the compiler test inside gcc (which fails), disable error trap
		sed 's@^gcc -o test test.c@set +e; gcc -o test test.c@' -i chapter05/$this_script
		;;
	esac

	# Set the dependency for the first target.
	if [ -z $PREV ] ; then PREV=022-settingenvironment ; fi


	#--------------------------------------------------------------------#
	#         >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<<          #
	#--------------------------------------------------------------------#
	#
	# Drop in the name of the target on a new line, and the previous target
	# as a dependency. Also call the echo_message function.
	echo -e "\n$this_script:  $PREV
	@\$(call echo_message, Building)" >> $MKFILE.tmp

	# Find the version of the command files, if it corresponds with the building of
	# a specific package
	vrs=`grep "^$name-version" $JHAHLFSDIR/packages | sed -e 's/.* //' -e 's/"//g'`
	# If $vrs isn't empty, we've got a package...
	if [ "$vrs" != "" ] ; then
		# Deal with non-standard names
		case $name in
			tcl)	FILE="$name$vrs-src.tar"	;;
		    uclibc)	FILE="uClibc-$vrs.tar"		;;
			gcc)	FILE=gcc-core-$vrs.tar		;;
	    	*)		FILE="$name-$vrs.tar"		;;
		esac
		# Insert instructions for unpacking the package and to set the PKGDIR variable.
(
cat << EOF
	@\$(call unpack,$FILE)
	@ROOT=\`head -n1 /tmp/unpacked | sed 's@^./@@;s@/.*@@'\` && \\
	chown -R hlfs \$(HLFS)\$(SRC)/\$\$ROOT && \\
	echo "export PKGDIR=\$(HLFS)\$(SRC)/\$\$ROOT" > envars && \\
EOF
) >> $MKFILE.tmp
	fi

    case $this_script in
		*binutils* )  # Dump the path to sources directory for later removal
			echo -e '\techo "$(HLFS)$(SRC)/$$ROOT" >> sources-dir' >> $MKFILE.tmp
			;;
		*adjusting* )  # For the Adjusting phase we must to cd to the binutils-build directory.
			echo -e '\t@echo "export PKGDIR=$(HLFS)$(SRC)/binutils-build" > envars' >> $MKFILE.tmp
			;;
		* )  # Everything else, add a true statment so we don't confuse make
			echo -e '\ttrue' >> $MKFILE.tmp
			;;
    esac

	# Insert date and disk usage at the top of the log file, the script run
	# and date and disk usage again at the bottom of the log file.
(
cat << EOF
	@echo -e "\n\`date\`\n\nKB: \`du -sk --exclude={0,1}??-* \$(HLFS)\`\n" >logs/$this_script && \\
	su - hlfs -c "source /home/hlfs/.bashrc && $JHAHLFSDIR/commands/$file" >>logs/$this_script 2>&1 && \\
	echo -e "\n\`date\`\n\nKB: \`du -sk --exclude={0,1}??-* \$(HLFS)\`\n" >>logs/$this_script
EOF
) >> $MKFILE.tmp

	# Remove the build directory(ies) except if the package build fails
	# (so we can review config.cache, config.log, etc.)
	# For Binutils the sources must be retained for some time.
	if [ "$vrs" != "" ] ; then
		if [[ ! `_IS_ $this_script binutils` ]]; then
(
cat << EOF
	@ROOT=\`head -n1 /tmp/unpacked | sed 's@^./@@;s@/.*@@'\` && \\
	rm -r \$(HLFS)\$(SRC)/\$\$ROOT && \\
	if [ -e \$(HLFS)\$(SRC)/$name-build ]; then \\
		rm -r \$(HLFS)\$(SRC)/$name-build; \\
	fi;
EOF
) >> $MKFILE.tmp
		fi
	fi

    # Remove the Binutils pass 1 sources after a successful Adjusting phase.
	if [[ `_IS_ $this_script adjusting` ]] ; then
(
cat << EOF
	@rm -r \`cat sources-dir\` && \\
	rm -r \$(HLFS)\$(SRC)/binutils-build && \\
	rm sources-dir
EOF
) >> $MKFILE.tmp
    fi

    # Include a touch of the target name so make can check if it's already been made.
    echo -e '\t@touch $@' >> $MKFILE.tmp
    #
    #--------------------------------------------------------------------#
    #              >>>>>>>> END OF Makefile ENTRY <<<<<<<<               #
    #--------------------------------------------------------------------#

    # Keep the script file name for Makefile dependencies.
    PREV=$this_script
  done  # end for file in chapter05/*
}


#----------------------------#
chapter6_Makefiles() {       # sysroot or chroot build phase
#----------------------------#
    local TARGET LOADER

    #
    # Set these definitions early and only once
    #
    if [[ ${MODEL} = "uclibc" ]]; then
        TARGET="pc-linux-uclibc"; LOADER="ld-uClibc.so.0"
    else
        TARGET="pc-linux-gnu";    LOADER="ld-linux.so.2"
    fi

	echo -e "${YELLOW}	Processing Chapter-6 scripts ${OFF}"
  for file in chapter06/* ; do
    # Keep the script file name
    this_script=`basename $file`

    # Skip this script depending on jhahlfs.conf flags set.
	case $this_script in
			# We'll run the chroot commands differently than the others, so skip them in the
			# dependencies and target creation.
		*chroot* )	continue ;;
		    # Test if the stripping phase must be skipped
		*-stripping* )	[[ "$STRIP" = "0" ]] && continue ;;
			# Select the appropriate library
		*glibc*)		[[ ${MODEL} = "uclibc" ]] && continue ;;
		*uclibc*)		[[ ${MODEL} = "glibc" ]]  && continue ;;
		*) ;;
    esac

    # First append each name of the script files to a list (this will become
    # the names of the targets in the Makefile
    chapter6="$chapter6 $this_script"

    # Grab the name of the target
    name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@'`

	#
	# Sed replacement for 'nodump' tag in xml scripts until Manuel has a chance to fix them
	#
    case $name in
		kernfs) # Remove sysctl code if host does not have grsecurity enabled
			if [[ "$GRSECURITY_HOST" = "0" ]]; then
			    sed '/sysctl/d' -i chapter06/$this_script
			fi
			;;
		module-init-tools)
				if [[ "$TEST" = "0" ]]; then  # This needs rework....
				  sed '/make distclean/d' -i chapter06/$this_script
				fi
			;;
		glibc)	# PATCH.. Turn off error trapping for the remainder of the script.
				sed 's|^make install|make install; set +e|'  -i chapter06/$this_script
			;;
		uclibc)	# PATCH..
				sed 's/EST5EDT/${TIMEZONE}/' -i chapter06/$this_script
				# PATCH.. Cannot use interactive programs/scripts.
				sed 's/make menuconfig/make oldconfig/' -i chapter06/$this_script
				sed 's@^cd gettext-runtime@cd ../gettext-*/gettext-runtime@' -i chapter06/$this_script
			;;
		gcc)	# PATCH..
				sed 's/rm /rm -f /' -i chapter06/$this_script
 			;;
    esac

	#--------------------------------------------------------------------#
	#         >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<<          #
	#--------------------------------------------------------------------#
	#
	# Drop in the name of the target on a new line, and the previous target
	# as a dependency. Also call the echo_message function.
	echo -e "\n$this_script:  $PREV
	@\$(call echo_message, Building)" >> $MKFILE.tmp

    # Find the version of the command files, if it corresponds with the building of
    # a specific package
    vrs=`grep "^$name-version" $JHAHLFSDIR/packages | sed -e 's/.* //' -e 's/"//g'`

	# If $vrs isn't empty, we've got a package...
	# Insert instructions for unpacking the package and changing directories
	if [ "$vrs" != "" ] ; then
	# Deal with non-standard names
	case $name in
		tcl)	FILE="$name$vrs-src.tar.*" ;;
		uclibc)	FILE="uClibc-$vrs.tar.*" ;;
		gcc)	FILE="gcc-core-$vrs.tar.*" ;;
		*)		FILE="$name-$vrs.tar.*" ;;
	esac
(
cat  << EOF
	@\$(call unpack2,$FILE)
	@ROOT=\`head -n1 /tmp/unpacked | sed 's@^./@@;s@/.*@@'\` && \\
	echo "export PKGDIR=\$(SRC)/\$\$ROOT" > envars && \\
	echo "export target=$(uname -m)-${TARGET}" >> envars && \\
	echo "export ldso=/lib/${LOADER}" >> envars
EOF
) >> $MKFILE.tmp
    fi

    case $this_script in
		*readjusting*) # For the Re-Adjusting phase we must to cd to the binutils-build directory.
			echo -e '\t@echo "export PKGDIR=$(SRC)/binutils-build" > envars' >> $MKFILE.tmp
			;;
		*glibc* | *uclibc* ) # For glibc and uClibc we need to set TIMEZONE envar.
			echo -e '\t@echo "export TIMEZONE=$(TIMEZONE)" >> envars' >> $MKFILE.tmp
			;;
		*groff* ) # For Groff we need to set PAGE envar.
			echo -e '\t@echo "export PAGE=$(PAGE)" >> envars' >> $MKFILE.tmp
			;;
	esac


    # In the mount of kernel filesystems we need to set HLFS and not to use chroot.
    if [[ `_IS_ $this_script kernfs` ]] ; then
(
cat << EOF
	@echo -e "\n\`date\`\n\nKB: \`du -sk --exclude={0,1}??-* \$(HLFS)\`\n" >logs/$this_script && \\
	export HLFS=\$(HLFS) && commands/$file >>logs/$this_script 2>&1 && \\
	echo -e "\n\`date\`\n\nKB: \`du -sk --exclude={0,1}??-* \$(HLFS)\`\n" >>logs/$this_script
EOF
) >> $MKFILE.tmp

    # The rest of Chapter06
    else
(
cat << EOF
	@echo -e "\n\`date\`\n\nKB: \`du -skx --exclude={0,1}??-* \$(HLFS)\`\n" >logs/$this_script && \\
	\$(CHROOT1) 'cd /jhahlfs && source envars && /jhahlfs/commands/$file >>/jhahlfs/logs/$this_script 2>&1' && \\
	echo -e "\n\`date\`\n\nKB: \`du -skx --exclude={0,1}??-* \$(HLFS)\`\n" >>logs/$this_script
EOF
) >> $MKFILE.tmp
    fi

    # Remove the build directory(ies) except if the package build fails.
    if [ "$vrs" != "" ] ; then
(
cat << EOF
	@ROOT=\`head -n1 /tmp/unpacked | sed 's@^./@@;s@/.*@@'\` && \\
	rm -r \$(HLFS)\$(SRC)/\$\$ROOT && \\
	if [ -e \$(HLFS)\$(SRC)/$name-build ]; then \\
		rm -r \$(HLFS)\$(SRC)/$name-build; \\
	fi;
EOF
) >> $MKFILE.tmp
    fi

    # Remove the Binutils pass 2 sources after a successful Re-Adjusting phase.
    if [[ `_IS_ $this_script readjusting` ]] ; then
(
cat << EOF
	@rm -r \`cat sources-dir\` && \\
	rm -r \$(HLFS)\$(SRC)/binutils-build && \\
	rm sources-dir
EOF
) >> $MKFILE.tmp
    fi

    # Include a touch of the target name so make can check if it's already been made.
    echo -e '\t@touch $@' >> $MKFILE.tmp
    #
    #--------------------------------------------------------------------#
    #              >>>>>>>> END OF Makefile ENTRY <<<<<<<<               #
    #--------------------------------------------------------------------#

    # Keep the script file name for Makefile dependencies.
    PREV=$this_script
  done # end for file in chapter06/*

}

#----------------------------#
chapter7_Makefiles() {       # Create a bootable system.. kernel, bootscripts..etc
#----------------------------#

    echo  "${YELLOW}	Processing Chapter-7 scripts ${OFF}"
  for file in chapter07/*; do
    # Keep the script file name
    this_script=`basename $file`

    # Grub must be configured manually.
    # The filesystems can't be unmounted via Makefile and the user
    # should enter the chroot environment to create the root
    # password, edit several files and setup Grub.
    case $this_script in
	*grub)	  continue	;;
	*reboot)  continue	;;
	*console) continue	;; # Use the file generated by lfs-bootscripts

	*kernel)	# How does Manuel add this string to the file..
			  sed 's|cd \$PKGDIR.*||'					-i chapter07/$this_script
				# You cannot run menuconfig from within the makefile
    		  sed 's|make menuconfig|make oldconfig|'	-i chapter07/$this_script
				# The files in the conglomeration dir are xxx.bz2
			  sed 's|.patch.gz|.patch.bz2|'				-i chapter07/$this_script
			  sed 's|gunzip|bunzip2|'					-i chapter07/$this_script
				# If defined include the keymap in the kernel
			  if [[ -n "$KEYMAP" ]]; then
				sed "s|^loadkeys -m.*>|loadkeys -m $KEYMAP >|" -i chapter07/$this_script
			  else
				sed '/loadkeys -m/d'					-i chapter07/$this_script
				sed '/drivers\/char/d'					-i chapter07/$this_script
			  fi
				# If no .config file is supplied, the kernel build is skipped
			  [[ -z $CONFIG ]] && continue
		;;
	*usage)   # The script bombs, disable error trapping
			  sed 's|set -e|set +e|'  -i chapter07/$this_script
		;;
	*profile) # Add the config values to the script
			  sed "s|LC_ALL=\*\*EDITME.*EDITME\*\*|LC_ALL=$LC_ALL|" -i chapter07/$this_script
			  sed "s|LANG=\*\*EDITME.*EDITME\*\*|LANG=$LANG|"       -i chapter07/$this_script
		;;
    esac

	# First append then name of the script file to a list (this will become
	# the names of the targets in the Makefile
	chapter7="$chapter7 $this_script"

	#--------------------------------------------------------------------#
	#         >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<<          #
	#--------------------------------------------------------------------#
	#
	# Drop in the name of the target on a new line, and the previous target
	# as a dependency. Also call the echo_message function.
	echo -e "\n$this_script:  $PREV
	@\$(call echo_message, Building)" >> $MKFILE.tmp

	if [[ `_IS_ $this_script bootscripts` ]] ; then
    	vrs=`grep "^lfs-bootscripts-version" $JHAHLFSDIR/packages | sed -e 's/.* //' -e 's/"//g'`
        FILE="lfs-bootscripts-$vrs.tar.*"
		# The bootscript pkg references both lfs AND blfs bootscripts...
		#  see XML script for other additions to bootscripts file
		# PATCH
        vrs=`grep "^blfs-bootscripts-version" $JHAHLFSDIR/packages | sed -e 's/.* //' -e 's/"//g'`
		sed "s|make install$|make install; cd ../blfs-bootscripts-$vrs|" -i chapter07/$this_script
(
cat  << EOF
	@\$(call unpack2,$FILE)
	@ROOT=\`head -n1 /tmp/unpacked | sed 's@^./@@;s@/.*@@'\` && \\
	echo "export PKGDIR=\$(SRC)/\$\$ROOT" > envars && \\
	echo "\$(HLFS)\$(SRC)/blfs-bootscripts-$vrs" > sources-dir
EOF
) >> $MKFILE.tmp
	fi

	if [[ `_IS_ $this_script kernel` ]] ; then
		# not much really, script does everything..
		echo -e "\t@cp -f $CONFIG \$(HLFS)/sources/kernel-config" >> $MKFILE.tmp
          fi

    # Check if we have a real /etc/fstab file
    if [[ `_IS_ $this_script fstab` ]] && [[ -n "$FSTAB" ]] ; then
(
cat << EOF
	@echo -e "\n\`date\`\n\nKB: \`du -skx --exclude={0,1}??-* \$(HLFS)\`\n" >logs/$this_script && \\
	cp -v $FSTAB \$(HLFS)/etc/fstab >>logs/$this_script 2>&1 && \\
	echo -e "\n\`date\`\n\nKB: \`du -skx --exclude={0,1}??-* \$(HLFS)\`\n" >>logs/$this_script
EOF
) >> $MKFILE.tmp
    else
    # Initialize the log and run the script
(
cat << EOF
	@echo -e "\n\`date\`\n\nKB: \`du -skx --exclude={0,1}??-* \$(HLFS)\`\n" >logs/$this_script && \\
	\$(CHROOT2) 'cd /jhahlfs && source envars && /jhahlfs/commands/$file >>/jhahlfs/logs/$this_script 2>&1' && \\
	echo -e "\n\`date\`\n\nKB: \`du -skx --exclude={0,1}??-* \$(HLFS)\`\n" >>logs/$this_script
EOF
) >> $MKFILE.tmp
    fi

    # Remove the build directory except if the package build fails.
    if [[ `_IS_ $this_script bootscripts` ]]; then
(
cat << EOF
	@ROOT=\`head -n1 /tmp/unpacked | sed 's@^./@@;s@/.*@@'\` && \\
	rm -r \$(HLFS)\$(SRC)/\$\$ROOT
	@rm -r \`cat sources-dir\` && \\
	rm sources-dir

EOF
) >> $MKFILE.tmp
    fi

    # Include a touch of the target name so make can check if it's already been made.
    echo -e '\t@touch $@' >> $MKFILE.tmp
    #
    #--------------------------------------------------------------------#
    #              >>>>>>>> END OF Makefile ENTRY <<<<<<<<               #
    #--------------------------------------------------------------------#

    # Keep the script file name for Makefile dependencies.
    PREV=$this_script
  done  # for file in chapter07/*
}


#----------------------------#
build_Makefile() {           # Construct a Makefile from the book scripts
#----------------------------#
    echo -e "${GREEN}Creating Makefile... ${OFF}"

    cd $JHAHLFSDIR/commands
    # Start with a clean Makefile.tmp file
    >$MKFILE.tmp

    chapter4_Makefiles
    chapter5_Makefiles
    chapter6_Makefiles
    chapter7_Makefiles

    # Add a header, some variables and include the function file
    # to the top of the real Makefile.
(
    cat << EOF
$HEADER

SRC= /sources
HLFS= $BUILDDIR
PAGE= $PAGE
TIMEZONE= $TIMEZONE

include hlfs-functions

EOF
) > $MKFILE


  # Add chroot commands
  i=1
  for file in chapter06/*chroot* ; do
    chroot=`cat $file | sed -e '/#!\/bin\/sh/d' \
			    -e '/^export/d' \
			    -e '/^logout/d' \
			    -e 's@ \\\@ @g' | tr -d '\n' |  sed -e 's/  */ /g' \
													-e 's|\\$|&&|g' \
													-e 's|exit||g' \
													-e 's|$| -c|' \
													-e 's|"$$HLFS"|$(HLFS)|'\
													-e 's|set -e||'`
    echo -e "CHROOT$i= $chroot\n" >> $MKFILE
    i=`expr $i + 1`
  done

  # Drop in the main target 'all:' and the chapter targets with each sub-target
  # as a dependency.
(
	cat << EOF
all:  chapter4 chapter5 chapter6 chapter7
	@\$(call echo_finished,$VERSION)

chapter4:  020-creatingtoolsdir 021-addinguser 022-settingenvironment

chapter5:  chapter4 $chapter5 restore-hlfs-env

chapter6:  chapter5 $chapter6

chapter7:  chapter6 $chapter7

clean-all:  clean
	rm -rf ./{commands,logs,Makefile,dump-hlfs-scripts.xsl,functions,packages,patches}

clean:  clean-chapter7 clean-chapter6 clean-chapter5 clean-chapter4

clean-chapter4:
	-if [ ! -f user-hlfs-exist ]; then \\
		userdel hlfs; \\
		rm -rf /home/hlfs; \\
	fi;
	rm -rf \$(HLFS)/tools
	rm -f /tools
	rm -f envars user-hlfs-exist
	rm -f 02* logs/02*.log

clean-chapter5:
	rm -rf \$(HLFS)/tools/*
	rm -f $chapter5 restore-hlfs-env sources-dir
	cd logs && rm -f $chapter5 && cd ..

clean-chapter6:
	-umount \$(HLFS)/sys
	-umount \$(HLFS)/proc
	-umount \$(HLFS)/dev/shm
	-umount \$(HLFS)/dev/pts
	-umount \$(HLFS)/dev
	rm -rf \$(HLFS)/{bin,boot,dev,etc,home,lib,media,mnt,opt,proc,root,sbin,srv,sys,tmp,usr,var}
	rm -f $chapter6
	cd logs && rm -f $chapter6 && cd ..

clean-chapter7:
	rm -f $chapter7
	cd logs && rm -f $chapter7 && cd ..

restore-hlfs-env:
	@\$(call echo_message, Building)
	@if [ -f /home/hlfs/.bashrc.XXX ]; then \\
		mv -fv /home/hlfs/.bashrc.XXX /home/hlfs/.bashrc; \\
	fi;
	@if [ -f /home/hlfs/.bash_profile.XXX ]; then \\
		mv -v /home/hlfs/.bash_profile.XXX /home/hlfs/.bash_profile; \\
	fi;
	@chown hlfs:hlfs /home/hlfs/.bash* && \\
	touch \$@

EOF
) >> $MKFILE

	# Bring over the items from the Makefile.tmp
	cat $MKFILE.tmp >> $MKFILE
	rm $MKFILE.tmp
	echo -ne "${GREEN}done\n${OFF}"
}

#----------------------------#
run_make() {                 # Execute the newly constructed Makefile
#----------------------------#
	# Test if make must be run.
	if [ "$RUNMAKE" = "1" ] ; then
		# Test to make sure we're running the build as root
		if [ "$UID" != "0" ] ; then
			echo "You must be logged in as root to successfully build HLFS."
			exit 1
		fi
		# Build the system
		if [ -e $MKFILE ] ; then
			echo -ne "Building the HLFS system...\n"
			cd $JHAHLFSDIR && make
			echo -ne "done\n"
		fi
	fi
}



###################################
###           MAIN              ###
###################################

# Evaluate any command line switches

while test $# -gt 0 ; do
  case $1 in
    --version | -V ) 'clear'; echo "$version" ; exit 0; ;;
    --help | -h )  usage | less
				  'clear' ; exit 0
		;;

    --HLFS-version | -L )
      test $# = 1 && eval "$exit_missing_arg"
      shift
      case $1 in
        dev* | SVN | trunk )
		  BOOK=""	# necessary to overide any value set inside jhahlfs.conf
		  WC=
          HLFSVRS=development
          ;;
        * )
          echo "$1 is an unsupported version at this time."
          exit 1
          ;;
      esac
      ;;

    --directory | -d )
      test $# = 1 && eval "$exit_missing_arg"
      shift
      BUILDDIR=$1
      JHAHLFSDIR=$BUILDDIR/jhahlfs
      LOGDIR=$JHAHLFSDIR/logs
      MKFILE=$JHAHLFSDIR/Makefile
      ;;

    --working-copy | -W )
      test $# = 1 && eval "$exit_missing_arg"
      shift
      if [ -f $1/patches.ent ] ; then
        WC=1
        BOOK=$1
      else
        echo -e "\nLook like $1 isn't a supported working copy."
        echo -e "Verify your selection and the command line.\n"
        exit 1
      fi
      ;;

    --get-packages | -P )	HPKG=1 ;;
    --run-make | -M )		RUNMAKE=1 ;;
    --rebuild )				CLEAN=1 ;;

    --readme )
		'clear'
		echo "$_inline_doc" | less
		'clear'; exit
		;;

    --fstab )
      test $# = 1 && eval "$exit_missing_arg"
      shift
      if [ -f $1 ] ; then
        FSTAB=$1
      else
        echo -e "\nFile $1 not found. Verify your command line.\n"
        exit 1
      fi
      ;;

    --kernel-config | -C )
      test $# = 1 && eval "$exit_missing_arg"
      shift
      if [ -f $1 ] ; then
        CONFIG=$1
      else
        echo -e "\nFile $1 not found. Verify your command line.\n"
        exit 1
      fi
      ;;
    * )
      echo "$usage"
      exit 1
      ;;
  esac
  shift
done

# Prevents setting "-d /" by mistake.
if [ $BUILDDIR = / ] ; then
    echo -ne "\nThe root directory can't be used to build HLFS.\n\n"
    exit 1
fi

# If $BUILDDIR has subdirectories like tools/ or bin/, stop the run
# and notify the user about that.
if [ -d $BUILDDIR/tools -o -d $BUILDDIR/bin ] && [ -z $CLEAN ] ; then
	no_empty_builddir
fi

# If requested, clean the build directory
clean_builddir

# Find the download client to use, if not already specified.
if [ -z $DL ] ; then
  if [ `type -p wget` ] ; then
    DL=wget
  elif [ `type -p curl` ] ; then
    DL=curl
  else
    eval "$no_dl_client"
  fi
fi

# Set the document location..
# if set by conf file leave it alone otherwise load the specified version
BOOK=${BOOK:=hlfs-$HLFSVRS}

[[ ! -d $JHAHLFSDIR ]]	&& mkdir -pv $JHAHLFSDIR
[[ ! -d $LOGDIR ]]		&& mkdir -v $LOGDIR
if [[ "$PWD" != "$JHAHLFSDIR" ]]; then
	cp -v $FILES $JHAHLFSDIR/
	sed 's,FAKEDIR,'$BOOK',' $XSL > $JHAHLFSDIR/dump-hlfs-scripts.xsl
	export XSL=$JHAHLFSDIR/dump-hlfs-scripts.xsl
fi

>$LOGDIR/$LOG


# Check for minumum gcc and kernel versions
check_requirements	1	# 0/1  0-do not display values.
validate_config		1	# 0/1  0-do not display values
get_book
build_Makefile
run_make