Context Navigation

source: LFS/lfs.xsl@ 04952c63

new_features

Last change on this file since 04952c63 was 77fa8ba, checked in by Pierre Labastie <pierre@…>, 9 years ago
Add IP, hostname, domain, etc to the list of configuration parameters. Font and encoding are in configuration too, but are not passed to the build commands Works only for LFS
Property mode set to `100644`
File size: 29.8 KB

Rev	Line
[7072e1f]	1	<?xml version="1.0" encoding="ISO-8859-1"?>
[db181c47]	2
[877cc6a]	3	<!-- $Id$ -->
	4
[7072e1f]	5	<xsl:stylesheet
	6	xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
	7	xmlns:exsl="http://exslt.org/common"
	8	extension-element-prefixes="exsl"
	9	version="1.0">
[557fe91]	10
[77fa8ba]	11	<!-- Parameters -->
	12
[7072e1f]	13	<!-- use package management ?
	14	n = no, original behavior
	15	y = yes, add PKG_DEST to scripts in install commands of chapter06-08
	16	-->
	17	<xsl:param name="pkgmngt" select="n"/>
	18
[31d6944]	19	<!-- Run test suites?
	20	0 = none
[77fa8ba]	21	1 = only chapter06 critical testsuites
[31d6944]	22	2 = all chapter06 testsuites
[28f4756]	23	3 = all chapter05 and chapter06 testsuites
	24	-->
[31d6944]	25	<xsl:param name="testsuite" select="1"/>
[01e51a1]	26
[28f4756]	27	<!-- Bomb on test suites failures?
[401f81e]	28	n = no, I want to build the full system and review the logs
	29	y = yes, bomb at the first test suite failure to can review the build dir
[28f4756]	30	-->
[401f81e]	31	<xsl:param name="bomb-testsuite" select="n"/>
[28f4756]	32
[7072e1f]	33	<!-- Install vim-lang package? OBSOLETE should always be 'n'-->
	34	<xsl:param name="vim-lang" select="n"/>
	35
[877cc6a]	36	<!-- Time zone -->
[a229600]	37	<xsl:param name="timezone" select="GMT"/>
[7072e1f]	38
[877cc6a]	39	<!-- Page size -->
	40	<xsl:param name="page" select="letter"/>
[7072e1f]	41
[877cc6a]	42	<!-- Locale settings -->
[a229600]	43	<xsl:param name="lang" select="C"/>
[b339c94]	44
	45	<!-- Install the whole set of locales -->
	46	<xsl:param name='full-locale' select='n'/>
[7072e1f]	47
[77fa8ba]	48	<!-- Hostname -->
	49	<xsl:param name='hostname' select='"HOSTNAME"'/>
	50
	51	<!-- Network parameters: interface, ip, gateway, prefix, broadcast, domain
	52	and nameservers -->
	53	<xsl:param name='interface' select='eth0'/>
	54	<xsl:param name='ip' select='"10.0.2.9"'/>
	55	<xsl:param name='gateway' select='"10.0.2.2"'/>
	56	<xsl:param name='prefix' select='24'/>
	57	<xsl:param name='broadcast' select='"10.0.2.255"'/>
	58	<xsl:param name='domain' select='"lfs.org"'/>
	59	<xsl:param name='nameserver1' select='"10.0.2.3"'/>
	60	<xsl:param name='nameserver2' select='"8.8.8.8"'/>
	61
	62	<!-- End parameters -->
	63
[557fe91]	64	<xsl:template match="/">
	65	<xsl:apply-templates select="//sect1"/>
	66	</xsl:template>
[7072e1f]	67
[557fe91]	68	<xsl:template match="sect1">
[7072e1f]	69	<xsl:if test="(../@id='chapter-temporary-tools' or
[14eaa9f]	70	../@id='chapter-building-system' or
	71	../@id='chapter-bootscripts' or
	72	../@id='chapter-bootable') and
	73	count(descendant::screen/userinput) > 0 and
	74	count(descendant::screen/userinput) >
[d68eb1b]	75	count(descendant::screen[@role='nodump']) and
	76	count(descendant::screen/userinput) >
	77	count(descendant::screen/userinput[starts-with(string(),'chroot')])">
	78	<!-- The last condition is a hack to allow previous versions of the
	79	book where the chroot commands did not have role="nodump".
	80	It only works if the chroot command is the only one on the page -->
[c4cf6de]	81	<!-- The dirs names -->
	82	<xsl:variable name="pi-dir" select="../processing-instruction('dbhtml')"/>
	83	<xsl:variable name="pi-dir-value" select="substring-after($pi-dir,'dir=')"/>
	84	<xsl:variable name="quote-dir" select="substring($pi-dir-value,1,1)"/>
	85	<xsl:variable name="dirname" select="substring-before(substring($pi-dir-value,2),$quote-dir)"/>
[7072e1f]	86	<!-- The file names -->
	87	<xsl:variable name="pi-file" select="processing-instruction('dbhtml')"/>
	88	<xsl:variable name="pi-file-value" select="substring-after($pi-file,'filename=')"/>
	89	<xsl:variable name="filename" select="substring-before(substring($pi-file-value,2),'.html')"/>
	90	<!-- The build order -->
	91	<xsl:variable name="position" select="position()"/>
	92	<xsl:variable name="order">
	93	<xsl:choose>
	94	<xsl:when test="string-length($position) = 1">
	95	<xsl:text>00</xsl:text>
	96	<xsl:value-of select="$position"/>
	97	</xsl:when>
	98	<xsl:when test="string-length($position) = 2">
	99	<xsl:text>0</xsl:text>
	100	<xsl:value-of select="$position"/>
	101	</xsl:when>
	102	<xsl:otherwise>
	103	<xsl:value-of select="$position"/>
	104	</xsl:otherwise>
	105	</xsl:choose>
	106	</xsl:variable>
	107	<!-- Inclusion of package manager scriptlets -->
	108	<xsl:if test="@id='ch-tools-stripping' and $pkgmngt='y'">
	109	<xsl:apply-templates
[575bcf3]	110	select="document('packageManager.xml')//sect1[contains(@id,'ch-tools')]"
[7072e1f]	111	mode="pkgmngt">
[575bcf3]	112	<xsl:with-param name="order" select="$order"/>
[7072e1f]	113	<xsl:with-param name="dirname" select="$dirname"/>
	114	</xsl:apply-templates>
	115	</xsl:if>
	116	<xsl:if test="@id='ch-system-strippingagain' and $pkgmngt='y'">
	117	<xsl:apply-templates
[575bcf3]	118	select="document('packageManager.xml')//sect1[contains(@id,'ch-system')]"
[7072e1f]	119	mode="pkgmngt">
[575bcf3]	120	<xsl:with-param name="order" select="$order"/>
[7072e1f]	121	<xsl:with-param name="dirname" select="$dirname"/>
	122	</xsl:apply-templates>
	123	</xsl:if>
	124	<!-- Creating dirs and files -->
	125	<exsl:document href="{$dirname}/{$order}-{$filename}" method="text">
	126	<xsl:choose>
	127	<xsl:when test="@id='ch-system-creatingdirs' or
	128	@id='ch-system-createfiles' or
	129	@id='ch-system-strippingagain'">
	130	<xsl:text>#!/tools/bin/bash set +h </xsl:text>
	131	</xsl:when>
	132	<xsl:otherwise>
	133	<xsl:text>#!/bin/bash set +h </xsl:text>
	134	</xsl:otherwise>
	135	</xsl:choose>
	136	<xsl:if test="not(@id='ch-tools-stripping') and
	137	not(@id='ch-system-strippingagain')">
	138	<xsl:text>set -e </xsl:text>
	139	</xsl:if>
	140	<xsl:text> </xsl:text>
	141	<xsl:if test="sect2[@role='installation']">
	142	<xsl:text>cd $PKGDIR </xsl:text>
	143	</xsl:if>
[f0a31de]	144	<xsl:apply-templates select="sect2\|
	145	screen[not(@role) or
	146	@role!='nodump']/userinput"/>
[e6e0c85]	147	<xsl:if test="@id='ch-system-creatingdirs' and $pkgmngt='y'">
[f0a31de]	148	<xsl:apply-templates
	149	select="document('packageManager.xml')//sect1[
	150	@id='ch-pkgmngt-creatingdirs'
[e6e0c85]	151	]//userinput"
	152	mode="pkgmngt"/>
[f0a31de]	153	</xsl:if>
[e6e0c85]	154	<xsl:if test="@id='ch-system-createfiles' and $pkgmngt='y'">
[f0a31de]	155	<xsl:apply-templates
	156	select="document('packageManager.xml')//sect1[
	157	@id='ch-pkgmngt-createfiles'
[e6e0c85]	158	]//userinput"
	159	mode="pkgmngt"/>
[f0a31de]	160	</xsl:if>
[d68eb1b]	161	<xsl:text>echo -e "\n\nTotalseconds: $SECONDS\n" </xsl:text>
[f0a31de]	162	<xsl:text>exit </xsl:text>
	163	</exsl:document>
	164	</xsl:if>
	165	</xsl:template>
	166
	167	<xsl:template match="sect2">
	168	<xsl:apply-templates
	169	select=".//screen[not(@role) or
	170	@role != 'nodump']/userinput[
	171	@remap = 'pre' or
	172	@remap = 'configure' or
	173	@remap = 'make' or
	174	@remap = 'test' and
[f2e80ac]	175	not(current()/../@id='ch-tools-dejagnu') and
	176	not(current()/../@id='ch-system-systemd')]"/>
[f0a31de]	177	<xsl:if
	178	test="ancestor::chapter[@id != 'chapter-temporary-tools'] and
	179	$pkgmngt = 'y' and
	180	descendant::screen[not(@role) or
	181	@role != 'nodump']/userinput[
	182	@remap='install']">
	183	<xsl:text>mkdir -pv $PKG_DEST/{boot,etc,lib,bin,sbin}
[7072e1f]	184	mkdir -pv $PKG_DEST/usr/{lib,bin,sbin,include}
	185	mkdir -pv $PKG_DEST/usr/share/{doc,info,man}
	186	mkdir -pv $PKG_DEST/usr/share/man/man{1..8}
	187	ln -sv share/{man,doc,info} $PKG_DEST/usr
	188	case $(uname -m) in
	189	x86_64) ln -sv lib $PKG_DEST/lib64 && ln -sv lib $PKG_DEST/usr/lib64 ;;
	190	esac
	191	</xsl:text>
[f0a31de]	192	</xsl:if>
	193	<xsl:if test="../@id = 'ch-system-glibc' and
[90f304c]	194	@role='installation' and
	195	$pkgmngt = 'y'">
[f0a31de]	196	<xsl:text>mkdir -pv $PKG_DEST/usr/include/{rpc,rpcsvc}
[7072e1f]	197	</xsl:text>
[f0a31de]	198	</xsl:if>
	199	<xsl:apply-templates
	200	select=".//screen[not(@role) or
	201	@role != 'nodump']/userinput[@remap = 'install']"/>
	202	<xsl:if test="ancestor::chapter[@id != 'chapter-temporary-tools'] and
	203	$pkgmngt = 'y' and
	204	descendant::screen[not(@role) or
	205	@role != 'nodump']/userinput[
	206	@remap='install']">
	207	<xsl:if test="../@id = 'ch-system-man-pages'">
[560bef1]	208	<!-- these files are provided by the shadow package -->
[7072e1f]	209	<xsl:text>rm -fv $PKG_DEST/usr/share/man/{man3/getspnam.3,man5/passwd.5}
[560bef1]	210	</xsl:text>
	211	</xsl:if>
	212	<!-- Attr man/man2 pages are already installed by man-pages. As of
[00313dd]	213	March 2013, they are the same pages.
	214	November 2015: now they are more accurate
	215	in man-pages, and the man5 section is also in man-pages... -->
[560bef1]	216	<xsl:if test="../@id = 'ch-system-attr'">
	217	<xsl:text>rm -fv $PKG_DEST/usr/share/man/man2/*
[00313dd]	218	rm -fv $PKG_DEST/usr/share/man/man5/*
[a983256]	219	</xsl:text>
	220	</xsl:if>
	221	<!-- nologin is installed by util-linux. remove it from shadow -->
	222	<xsl:if test="../@id = 'ch-system-shadow'">
	223	<xsl:text>rm -fv $PKG_DEST/usr/share/man/man8/nologin.8
	224	rm -fv $PKG_DEST/sbin/nologin
[7072e1f]	225	</xsl:text>
[f0a31de]	226	</xsl:if>
	227	<xsl:text>rm -fv $PKG_DEST/{,usr/}lib64
[7072e1f]	228	rm -fv $PKG_DEST/usr/{man,doc,info}
	229	for dir in $PKG_DEST/usr/share/man/man{1..8}; do
	230	[[ -z $(ls $dir) ]] && rmdir -v $dir
	231	done
	232	for dir in $PKG_DEST/usr/share/{doc,info,man}; do
	233	[[ -z $(ls $dir) ]] && rmdir -v $dir
	234	done
	235	for dir in $PKG_DEST/usr/{lib,bin,sbin,include}; do
	236	[[ -z $(ls $dir) ]] && rmdir -v $dir
	237	done
	238	for dir in $PKG_DEST/{boot,etc,lib,bin,sbin}; do
	239	[[ -z $(ls $dir) ]] && rmdir -v $dir
	240	done
	241	packInstall
	242	rm -rf $PKG_DEST
	243	</xsl:text>
[f0a31de]	244	</xsl:if>
	245	<xsl:if test="$testsuite='3' and
	246	../@id='ch-tools-glibc' and
	247	@role='installation'">
	248	<xsl:copy-of select="//userinput[@remap='locale-test']"/>
	249	<xsl:text> </xsl:text>
	250	</xsl:if>
	251	<xsl:if test="../@id='ch-system-glibc' and @role='installation'">
	252	<xsl:choose>
	253	<xsl:when test="$full-locale='y'">
	254	<xsl:copy-of select="//userinput[@remap='locale-full']"/>
	255	<xsl:text> </xsl:text>
	256	</xsl:when>
	257	<xsl:otherwise>
	258	<xsl:copy-of select="//userinput[@remap='locale-test']"/>
	259	<xsl:text> </xsl:text>
	260	<xsl:if test="not(contains(string(//userinput[@remap='locale-test']),$lang)) and $lang!='C' and $lang!='POSIX'">
	261	<xsl:text>if LOCALE=`grep "</xsl:text>
	262	<xsl:value-of select="$lang"/>
	263	<xsl:text>/" $PKGDIR/localedata/SUPPORTED`; then
[b339c94]	264	CHARMAP=`echo $LOCALE \| sed 's,[^/]/\([^ ]\) [\],\1,'`
	265	INPUT=`echo $LOCALE \| sed 's,[/.].*,,'`
	266	LOCALE=`echo $LOCALE \| sed 's,/.*,,'`
	267	localedef -i $INPUT -f $CHARMAP $LOCALE
	268	fi
	269	</xsl:text>
[f0a31de]	270	</xsl:if>
	271	</xsl:otherwise>
	272	</xsl:choose>
[c4cf6de]	273	</xsl:if>
[f0a31de]	274	<xsl:apply-templates
	275	select=".//screen[
	276	not(@role) or
	277	@role != 'nodump'
	278	]/userinput[
[f2e80ac]	279	not(@remap) or
	280	@remap='adjust' or
	281	@remap='test' and current()/../@id='ch-tools-dejagnu' or
	282	@remap='test' and current()/../@id='ch-system-systemd'
[f0a31de]	283	]"/>
[557fe91]	284	</xsl:template>
	285
[f0a31de]	286	<xsl:template match="sect1" mode="pkgmngt">
[7072e1f]	287	<xsl:param name="dirname" select="chapter05"/>
	288	<!-- The build order -->
[575bcf3]	289	<xsl:param name="order" select="062"/>
[7072e1f]	290	<!-- The file names -->
	291	<xsl:variable name="pi-file" select="processing-instruction('dbhtml')"/>
	292	<xsl:variable name="pi-file-value" select="substring-after($pi-file,'filename=')"/>
	293	<xsl:variable name="filename" select="substring-before(substring($pi-file-value,2),'.html')"/>
	294	<!-- Creating dirs and files -->
[8099885]	295	<xsl:if test="count(descendant::screen/userinput) > 0 and
	296	count(descendant::screen/userinput) >
	297	count(descendant::screen[@role='nodump'])">
	298	<exsl:document href="{$dirname}/{$order}-{position()}-{$filename}"
	299	method="text">
	300	<xsl:text>#!/bin/bash
[7072e1f]	301	set +h
	302	set -e
	303
	304	cd $PKGDIR
	305	</xsl:text>
[8099885]	306	<xsl:apply-templates
	307	select=".//screen[not(@role) or
	308	@role != 'nodump']/userinput[@remap != 'adjust']"
[7072e1f]	309	mode="pkgmngt"/>
[8099885]	310	<xsl:if test="$dirname = 'chapter06'">
	311	<xsl:text>packInstall
[7072e1f]	312	rm -rf $PKG_DEST
	313	</xsl:text>
[8099885]	314	</xsl:if>
	315	<xsl:apply-templates
	316	select=".//screen[not(@role) or
	317	@role != 'nodump'
	318	]/userinput[not(@remap) or
	319	@remap='adjust'
[7072e1f]	320	]"
	321	mode="pkgmngt"/>
[8099885]	322	<xsl:text>
[7072e1f]	323	echo -e "\n\nTotalseconds: $SECONDS\n"
	324	exit
	325	</xsl:text>
[8099885]	326	</exsl:document>
	327	</xsl:if>
[557fe91]	328	</xsl:template>
	329
[7072e1f]	330	<xsl:template match="userinput" mode="pkgmngt">
	331	<xsl:apply-templates/>
	332	<xsl:text> </xsl:text>
	333	</xsl:template>
	334
	335	<xsl:template match="userinput">
[3eb60fa]	336	<xsl:choose>
[fd691b4]	337	<!-- Copying the kernel config file -->
	338	<xsl:when test="string() = 'make mrproper'">
	339	<xsl:text>make mrproper </xsl:text>
[7072e1f]	340	<xsl:if test="ancestor::sect1[@id='ch-bootable-kernel']">
[bcfb3bf]	341	<xsl:text>cp -v ../kernel-config .config </xsl:text>
	342	</xsl:if>
[92568bf]	343	</xsl:when>
[7072e1f]	344	<!-- test instructions -->
	345	<xsl:when test="@remap = 'test'">
[4afcedb]	346	<xsl:choose>
	347	<xsl:when test="$testsuite = '0'"/>
	348	<xsl:when test="$testsuite = '1' and
	349	not(ancestor::sect1[@id='ch-system-gcc']) and
	350	not(ancestor::sect1[@id='ch-system-glibc']) and
[7072e1f]	351	not(ancestor::sect1[@id='ch-system-gmp']) and
	352	not(ancestor::sect1[@id='ch-system-mpfr']) and
[4afcedb]	353	not(ancestor::sect1[@id='ch-system-binutils'])"/>
	354	<xsl:when test="$testsuite = '2' and
	355	ancestor::chapter[@id='chapter-temporary-tools']"/>
	356	<xsl:otherwise>
	357	<xsl:choose>
	358	<xsl:when test="$bomb-testsuite = 'n'">
[7072e1f]	359	<xsl:choose>
	360	<!-- special case for glibc -->
	361	<xsl:when test="contains(string(), 'glibc-check-log')">
	362	<xsl:value-of
	363	select="substring-before(string(),'2>&1')"/>
	364	<xsl:text>>> $TEST_LOG 2>&1 \|\| true </xsl:text>
	365	</xsl:when>
[e40a68e]	366	<!-- special case for procps-ng -->
	367	<xsl:when test="contains(string(), 'pushd')">
	368	<xsl:text>{ </xsl:text>
	369	<xsl:apply-templates/>
	370	<xsl:text>; } >> $TEST_LOG 2>&1 \|\| true </xsl:text>
	371	</xsl:when>
[7072e1f]	372	<xsl:when test="contains(string(), 'make -k')">
	373	<xsl:apply-templates/>
	374	<xsl:text> >> $TEST_LOG 2>&1 \|\| true </xsl:text>
	375	</xsl:when>
	376	<xsl:when test="contains(string(), 'make')">
	377	<xsl:value-of select="substring-before(string(),'make')"/>
	378	<xsl:text>make -k</xsl:text>
	379	<xsl:value-of select="substring-after(string(),'make')"/>
	380	<xsl:text> >> $TEST_LOG 2>&1 \|\| true </xsl:text>
	381	</xsl:when>
	382	<xsl:otherwise>
	383	<xsl:apply-templates/>
	384	<xsl:if test="not(contains(string(), '>>'))">
	385	<xsl:text> >> $TEST_LOG 2>&1</xsl:text>
	386	</xsl:if>
	387	<xsl:text> </xsl:text>
	388	</xsl:otherwise>
	389	</xsl:choose>
[4afcedb]	390	</xsl:when>
	391	<xsl:otherwise>
[7072e1f]	392	<!-- bomb-testsuite != 'n'-->
	393	<xsl:choose>
	394	<!-- special case for glibc -->
	395	<xsl:when test="contains(string(), 'glibc-check-log')">
	396	<xsl:value-of
	397	select="substring-before(string(),'2>&1')"/>
[2c9a16b]	398	<xsl:text>>> $TEST_LOG 2>&1 \|\| true </xsl:text>
[7072e1f]	399	</xsl:when>
[e40a68e]	400	<!-- special case for gmp -->
[f663589]	401	<xsl:when test="contains(string(), 'tee gmp-check-log')">
	402	<xsl:text>(</xsl:text>
	403	<xsl:apply-templates/>
	404	<xsl:text>>> $TEST_LOG 2>&1 && exit $PIPESTATUS) </xsl:text>
	405	</xsl:when>
[e40a68e]	406	<!-- special case for procps-ng -->
	407	<xsl:when test="contains(string(), 'pushd')">
	408	<xsl:text>{ </xsl:text>
	409	<xsl:apply-templates/>
	410	<xsl:text>; } >> $TEST_LOG 2>&1 </xsl:text>
	411	</xsl:when>
[2c9a16b]	412	<xsl:when test="contains(string(), 'make -k')">
	413	<xsl:apply-templates/>
	414	<xsl:text> >> $TEST_LOG 2>&1 \|\| true </xsl:text>
	415	</xsl:when>
[7072e1f]	416	<xsl:otherwise>
	417	<xsl:apply-templates/>
	418	<xsl:if test="not(contains(string(), '>>'))">
	419	<xsl:text> >> $TEST_LOG 2>&1</xsl:text>
	420	</xsl:if>
	421	<xsl:text> </xsl:text>
	422	</xsl:otherwise>
	423	</xsl:choose>
[4afcedb]	424	</xsl:otherwise>
	425	</xsl:choose>
	426	</xsl:otherwise>
	427	</xsl:choose>
	428	</xsl:when>
[7072e1f]	429	<!-- End of test instructions -->
[fd691b4]	430	<!-- Don't stop on strip run -->
	431	<xsl:when test="contains(string(),'strip ')">
[3eb60fa]	432	<xsl:apply-templates/>
[fd691b4]	433	<xsl:text> \|\| true </xsl:text>
[1f025ca]	434	</xsl:when>
[7072e1f]	435	<!-- Package management -->
	436	<!-- Add $PKG_DEST to installation commands -->
	437	<xsl:when test="@remap='install' and
	438	not(ancestor::chapter[
	439	@id='chapter-temporary-tools'
	440	])">
	441	<xsl:choose>
	442	<xsl:when test="$pkgmngt='n'">
	443	<xsl:choose>
	444	<xsl:when test="contains(string(),'firmware,udev')">
	445	<xsl:text>if [[ ! -d /lib/udev/devices ]] ; then </xsl:text>
	446	<xsl:apply-templates/>
	447	<xsl:text> fi </xsl:text>
	448	</xsl:when>
	449	<xsl:otherwise>
	450	<xsl:apply-templates/>
	451	<xsl:text> </xsl:text>
	452	</xsl:otherwise>
	453	</xsl:choose>
	454	</xsl:when>
	455	<xsl:otherwise><!--pkgmngt = 'y'-->
	456	<xsl:choose>
	457	<xsl:when test="./literal">
	458	<xsl:call-template name="outputpkgdest">
[560bef1]	459	<xsl:with-param name="outputstring" select="text()[1]"/>
[7072e1f]	460	</xsl:call-template>
	461	<xsl:apply-templates select="literal"/>
	462	<xsl:call-template name="outputpkgdest">
[560bef1]	463	<xsl:with-param name="outputstring" select="text()[2]"/>
[7072e1f]	464	</xsl:call-template>
	465	</xsl:when>
	466	<xsl:otherwise>
	467	<xsl:call-template name="outputpkgdest">
	468	<xsl:with-param name="outputstring" select="string()"/>
	469	</xsl:call-template>
	470	</xsl:otherwise>
	471	</xsl:choose>
	472	</xsl:otherwise>
	473	</xsl:choose>
	474	</xsl:when>
[57ef0c1]	475	<!-- if package management, we should make an independant package for
	476	tzdata. -->
	477	<xsl:when test="contains(string(),'tzdata') and $pkgmngt='y'">
	478	<xsl:text>
	479	OLD_PKG_DEST=$PKG_DEST
	480	OLD_PKGDIR=$PKGDIR
[56d8426]	481	PKG_DEST=$(dirname $OLD_PKG_DEST)/001-tzdata
[57ef0c1]	482	PKGDIR=$(dirname $PKGDIR)/tzdata-</xsl:text>
	483	<xsl:copy-of select="substring-before(
	484	substring-after(string(),'tzdata'),
	485	'.tar')"/>
	486	<xsl:text>
	487	</xsl:text>
	488	<xsl:copy-of select="substring-before(string(),'ZONEINFO=')"/>
	489	<xsl:text>ZONEINFO=$PKG_DEST</xsl:text>
	490	<xsl:copy-of select="substring-after(string(),'ZONEINFO=')"/>
	491	<xsl:text>
	492	packInstall
	493	rm -rf $PKG_DEST
	494	PKG_DEST=$OLD_PKG_DEST
	495	unset OLD_PKG_DEST
	496	PKGDIR=$OLD_PKGDIR
	497	unset OLD_PKGDIR
	498	</xsl:text>
	499	</xsl:when><!-- addition for tzdata + package management -->
[7072e1f]	500	<!-- End addition for package management -->
[fd691b4]	501	<!-- The rest of commands -->
[1f025ca]	502	<xsl:otherwise>
	503	<xsl:apply-templates/>
[fd691b4]	504	<xsl:text> </xsl:text>
[1f025ca]	505	</xsl:otherwise>
	506	</xsl:choose>
	507	</xsl:template>
[7072e1f]	508
[557fe91]	509	<xsl:template match="replaceable">
[a41ce58]	510	<xsl:choose>
[2a54650]	511	<xsl:when test="ancestor::sect1[@id='ch-system-glibc']">
[877cc6a]	512	<xsl:value-of select="$timezone"/>
[2a54650]	513	</xsl:when>
[a41ce58]	514	<xsl:when test="ancestor::sect1[@id='ch-system-groff']">
[877cc6a]	515	<xsl:value-of select="$page"/>
[a41ce58]	516	</xsl:when>
[81a7fb8]	517	<xsl:when test="contains(string(.),'<ll>_<CC>')">
	518	<xsl:value-of select="$lang"/>
	519	</xsl:when>
[77fa8ba]	520	<xsl:when test="contains(string(.),'Domain')">
	521	<xsl:value-of select="$domain"/>
	522	</xsl:when>
	523	<xsl:when test="contains(string(.),'primary')">
	524	<xsl:value-of select="$nameserver1"/>
	525	</xsl:when>
	526	<xsl:when test="contains(string(.),'secondary')">
	527	<xsl:value-of select="$nameserver2"/>
	528	</xsl:when>
	529	<xsl:when test="contains(string(.),'192.168.1.1')">
	530	<xsl:value-of select="$ip"/>
	531	</xsl:when>
	532	<xsl:when test="contains(string(.),'HOSTNAME')">
	533	<xsl:value-of select="$hostname"/>
	534	<xsl:text>.</xsl:text>
	535	<xsl:value-of select="$domain"/>
	536	</xsl:when>
	537	<xsl:when test="contains(string(.),'alias')">
	538	<xsl:value-of select="$hostname"/>
	539	</xsl:when>
	540	<xsl:when test="contains(string(.),'<lfs>')">
	541	<xsl:value-of select="$hostname"/>
	542	</xsl:when>
[a41ce58]	543	<xsl:otherwise>
	544	<xsl:text>**EDITME</xsl:text>
	545	<xsl:apply-templates/>
	546	<xsl:text>EDITME**</xsl:text>
	547	</xsl:otherwise>
	548	</xsl:choose>
[557fe91]	549	</xsl:template>
[7072e1f]	550
[77fa8ba]	551	<xsl:template match="literal">
	552	<xsl:choose>
	553	<xsl:when test="contains(string(),'ONBOOT')">
	554	<xsl:call-template name="outputnet">
	555	<xsl:with-param name="netstring" select="string()"/>
	556	</xsl:call-template>
	557	</xsl:when>
	558	<xsl:otherwise>
	559	<xsl:apply-templates/>
	560	</xsl:otherwise>
	561	</xsl:choose>
	562	</xsl:template>
	563
	564	<xsl:template name="outputnet">
	565	<xsl:param name="netstring" select="''"/>
	566	<!-- We suppose that book example has the following values:
	567	- interface: eth0
	568	- ip: 192.168.1.1
	569	- gateway: 192.168.1.2
	570	- prefix: 24
	571	- broadcast: 192.168.1.255
	572	Change below if book changes -->
	573	<xsl:choose>
	574	<xsl:when test="contains($netstring,'eth0')">
	575	<xsl:call-template name="outputnet">
	576	<xsl:with-param name="netstring"
	577	select="substring-before($netstring,'eth0')"/>
	578	</xsl:call-template>
	579	<xsl:value-of select="$interface"/>
	580	<xsl:call-template name="outputnet">
	581	<xsl:with-param name="netstring"
	582	select="substring-after($netstring,'eth0')"/>
	583	</xsl:call-template>
	584	</xsl:when>
	585	<xsl:when test="contains($netstring,'192.168.1.1')">
	586	<xsl:call-template name="outputnet">
	587	<xsl:with-param name="netstring"
	588	select="substring-before($netstring,'192.168.1.1')"/>
	589	</xsl:call-template>
	590	<xsl:value-of select="$ip"/>
	591	<xsl:call-template name="outputnet">
	592	<xsl:with-param name="netstring"
	593	select="substring-after($netstring,'192.168.1.1')"/>
	594	</xsl:call-template>
	595	</xsl:when>
	596	<!-- must test this before the following, because 192.168.1.255 contains
	597	192.168.1.2! -->
	598	<xsl:when test="contains($netstring,'192.168.1.255')">
	599	<xsl:call-template name="outputnet">
	600	<xsl:with-param name="netstring"
	601	select="substring-before($netstring,'192.168.1.255')"/>
	602	</xsl:call-template>
	603	<xsl:value-of select="$broadcast"/>
	604	<xsl:call-template name="outputnet">
	605	<xsl:with-param name="netstring"
	606	select="substring-after($netstring,'192.168.1.255')"/>
	607	</xsl:call-template>
	608	</xsl:when>
	609	<xsl:when test="contains($netstring,'192.168.1.2')">
	610	<xsl:call-template name="outputnet">
	611	<xsl:with-param name="netstring"
	612	select="substring-before($netstring,'192.168.1.2')"/>
	613	</xsl:call-template>
	614	<xsl:value-of select="$gateway"/>
	615	<xsl:call-template name="outputnet">
	616	<xsl:with-param name="netstring"
	617	select="substring-after($netstring,'192.168.1.2')"/>
	618	</xsl:call-template>
	619	</xsl:when>
	620	<xsl:when test="contains($netstring,'24')">
	621	<xsl:call-template name="outputnet">
	622	<xsl:with-param name="netstring"
	623	select="substring-before($netstring,'24')"/>
	624	</xsl:call-template>
	625	<xsl:value-of select="$prefix"/>
	626	<xsl:call-template name="outputnet">
	627	<xsl:with-param name="netstring"
	628	select="substring-after($netstring,'24')"/>
	629	</xsl:call-template>
	630	</xsl:when>
	631	<xsl:otherwise>
	632	<xsl:value-of select="$netstring"/>
	633	</xsl:otherwise>
	634	</xsl:choose>
	635	</xsl:template>
	636
[7072e1f]	637	<xsl:template name="outputpkgdest">
	638	<xsl:param name="outputstring" select="foo"/>
	639	<xsl:choose>
	640	<xsl:when test="contains($outputstring,'make ')">
	641	<xsl:choose>
	642	<xsl:when test="not(starts-with($outputstring,'make'))">
	643	<xsl:call-template name="outputpkgdest">
	644	<xsl:with-param name="outputstring"
	645	select="substring-before($outputstring,'make')"/>
	646	</xsl:call-template>
	647	<xsl:call-template name="outputpkgdest">
	648	<xsl:with-param
	649	name="outputstring"
	650	select="substring-after($outputstring,
	651	substring-before($outputstring,'make'))"/>
	652	</xsl:call-template>
	653	</xsl:when>
	654	<xsl:otherwise>
	655	<xsl:choose>
	656	<!-- special cases (no DESTDIR) here -->
	657	<xsl:when test="ancestor::sect1[@id='ch-system-glibc']">
	658	<xsl:text>make install_root=$PKG_DEST -j1</xsl:text>
	659	<xsl:value-of
	660	select="substring-before(substring-after(string(),'make'),
	661	'install')"/>
	662	<xsl:text>install </xsl:text>
	663	</xsl:when>
	664	<xsl:when test="ancestor::sect1[@id='ch-system-bzip2']">
	665	<xsl:text>make PREFIX=$PKG_DEST/usr install </xsl:text>
	666	</xsl:when>
	667	<xsl:when test="ancestor::sect1[@id='ch-system-sysklogd']">
	668	<xsl:text>make BINDIR=$PKG_DEST/sbin prefix=$PKG_DEST install </xsl:text>
	669	</xsl:when>
	670	<xsl:when test="ancestor::sect1[@id='ch-system-iproute2']">
[b1f4a8d]	671	<xsl:text>make DESTDIR=$PKG_DEST DOCDIR=</xsl:text>
[7072e1f]	672	<xsl:value-of
[b1f4a8d]	673	select="substring-before(substring-after(string(),'DOCDIR='),
[7072e1f]	674	'install')"/>
	675	<xsl:text>install </xsl:text>
	676	</xsl:when>
	677	<xsl:when test="ancestor::sect1[@id='ch-system-sysvinit']">
	678	<xsl:text>make ROOT=$PKG_DEST</xsl:text>
	679	<xsl:value-of
	680	select="substring-before(substring-after(string(),'make'),
	681	'install')"/>
	682	<xsl:text>install </xsl:text>
	683	</xsl:when>
	684	<xsl:when test="ancestor::sect1[@id='ch-bootable-kernel']">
	685	<xsl:text>make INSTALL_MOD_PATH=$PKG_DEST</xsl:text>
	686	<xsl:value-of
	687	select="substring-before(substring-after(string(),'make'),
	688	'install')"/>
	689	<xsl:text>install </xsl:text>
	690	</xsl:when>
[560bef1]	691	<xsl:when test="ancestor::sect1[@id='ch-system-attr']">
	692	<xsl:text>DIST_ROOT=$PKG_DEST make</xsl:text>
	693	<xsl:call-template name="outputpkgdest">
	694	<xsl:with-param name="outputstring"
	695	select="substring-after($outputstring,'make')"/>
	696	</xsl:call-template>
	697	</xsl:when>
[7072e1f]	698	<xsl:otherwise>
[560bef1]	699	<xsl:text>make DESTDIR=$PKG_DEST</xsl:text>
[e6e0c85]	700	<xsl:call-template name="outputpkgdest">
[560bef1]	701	<xsl:with-param
[7072e1f]	702	name="outputstring"
	703	select="substring-after($outputstring,'make')"/>
[560bef1]	704	</xsl:call-template>
[7072e1f]	705	</xsl:otherwise>
	706	</xsl:choose>
	707	</xsl:otherwise>
	708	</xsl:choose>
	709	</xsl:when>
	710	<xsl:otherwise> <!-- no make in this string -->
	711	<xsl:choose>
	712	<xsl:when test="contains($outputstring,'>/') and
	713	not(contains(substring-before($outputstring,'>/'),' /'))">
	714	<xsl:value-of select="substring-before($outputstring,'>/')"/>
	715	<xsl:text>>$PKG_DEST/</xsl:text>
	716	<xsl:call-template name="outputpkgdest">
	717	<xsl:with-param name="outputstring" select="substring-after($outputstring,'>/')"/>
	718	</xsl:call-template>
	719	</xsl:when>
	720	<xsl:when test="contains($outputstring,' /')">
	721	<xsl:value-of select="substring-before($outputstring,' /')"/>
	722	<xsl:text> $PKG_DEST/</xsl:text>
	723	<xsl:call-template name="outputpkgdest">
	724	<xsl:with-param name="outputstring" select="substring-after($outputstring,' /')"/>
	725	</xsl:call-template>
	726	</xsl:when>
	727	<xsl:otherwise>
	728	<xsl:value-of select="$outputstring"/>
	729	<xsl:text> </xsl:text>
	730	</xsl:otherwise>
	731	</xsl:choose>
	732	</xsl:otherwise>
	733	</xsl:choose>
	734	</xsl:template>
[557fe91]	735	</xsl:stylesheet>

Note: See TracBrowser for help on using the repository browser.

Download in other formats: