Context Navigation

source: LFS/lfs.xsl@ 33ff403

new_features

Last change on this file since 33ff403 was 33ff403, checked in by Pierre Labastie <pierre@…>, 8 years ago
Adapt IP GATEWAY to book instructions
Property mode set to `100644`
File size: 29.8 KB

Rev	Line
[7072e1f]	1	<?xml version="1.0" encoding="ISO-8859-1"?>
[db181c47]	2
[877cc6a]	3	<!-- $Id$ -->
	4
[7072e1f]	5	<xsl:stylesheet
	6	xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
	7	xmlns:exsl="http://exslt.org/common"
	8	extension-element-prefixes="exsl"
	9	version="1.0">
[557fe91]	10
[77fa8ba]	11	<!-- Parameters -->
	12
[7072e1f]	13	<!-- use package management ?
	14	n = no, original behavior
	15	y = yes, add PKG_DEST to scripts in install commands of chapter06-08
	16	-->
	17	<xsl:param name="pkgmngt" select="n"/>
	18
[31d6944]	19	<!-- Run test suites?
	20	0 = none
[77fa8ba]	21	1 = only chapter06 critical testsuites
[31d6944]	22	2 = all chapter06 testsuites
[28f4756]	23	3 = all chapter05 and chapter06 testsuites
	24	-->
[31d6944]	25	<xsl:param name="testsuite" select="1"/>
[01e51a1]	26
[28f4756]	27	<!-- Bomb on test suites failures?
[401f81e]	28	n = no, I want to build the full system and review the logs
	29	y = yes, bomb at the first test suite failure to can review the build dir
[28f4756]	30	-->
[401f81e]	31	<xsl:param name="bomb-testsuite" select="n"/>
[28f4756]	32
[7072e1f]	33	<!-- Install vim-lang package? OBSOLETE should always be 'n'-->
	34	<xsl:param name="vim-lang" select="n"/>
	35
[877cc6a]	36	<!-- Time zone -->
[a229600]	37	<xsl:param name="timezone" select="GMT"/>
[7072e1f]	38
[877cc6a]	39	<!-- Page size -->
	40	<xsl:param name="page" select="letter"/>
[7072e1f]	41
[877cc6a]	42	<!-- Locale settings -->
[a229600]	43	<xsl:param name="lang" select="C"/>
[b339c94]	44
	45	<!-- Install the whole set of locales -->
	46	<xsl:param name='full-locale' select='n'/>
[7072e1f]	47
[77fa8ba]	48	<!-- Hostname -->
	49	<xsl:param name='hostname' select='"HOSTNAME"'/>
	50
	51	<!-- Network parameters: interface, ip, gateway, prefix, broadcast, domain
	52	and nameservers -->
	53	<xsl:param name='interface' select='eth0'/>
	54	<xsl:param name='ip' select='"10.0.2.9"'/>
	55	<xsl:param name='gateway' select='"10.0.2.2"'/>
	56	<xsl:param name='prefix' select='24'/>
	57	<xsl:param name='broadcast' select='"10.0.2.255"'/>
	58	<xsl:param name='domain' select='"lfs.org"'/>
	59	<xsl:param name='nameserver1' select='"10.0.2.3"'/>
	60	<xsl:param name='nameserver2' select='"8.8.8.8"'/>
	61
	62	<!-- End parameters -->
	63
[557fe91]	64	<xsl:template match="/">
	65	<xsl:apply-templates select="//sect1"/>
	66	</xsl:template>
[7072e1f]	67
[557fe91]	68	<xsl:template match="sect1">
[7072e1f]	69	<xsl:if test="(../@id='chapter-temporary-tools' or
[14eaa9f]	70	../@id='chapter-building-system' or
	71	../@id='chapter-bootscripts' or
	72	../@id='chapter-bootable') and
	73	count(descendant::screen/userinput) > 0 and
	74	count(descendant::screen/userinput) >
[d68eb1b]	75	count(descendant::screen[@role='nodump']) and
	76	count(descendant::screen/userinput) >
	77	count(descendant::screen/userinput[starts-with(string(),'chroot')])">
	78	<!-- The last condition is a hack to allow previous versions of the
	79	book where the chroot commands did not have role="nodump".
	80	It only works if the chroot command is the only one on the page -->
[c4cf6de]	81	<!-- The dirs names -->
	82	<xsl:variable name="pi-dir" select="../processing-instruction('dbhtml')"/>
	83	<xsl:variable name="pi-dir-value" select="substring-after($pi-dir,'dir=')"/>
	84	<xsl:variable name="quote-dir" select="substring($pi-dir-value,1,1)"/>
	85	<xsl:variable name="dirname" select="substring-before(substring($pi-dir-value,2),$quote-dir)"/>
[7072e1f]	86	<!-- The file names -->
	87	<xsl:variable name="pi-file" select="processing-instruction('dbhtml')"/>
	88	<xsl:variable name="pi-file-value" select="substring-after($pi-file,'filename=')"/>
	89	<xsl:variable name="filename" select="substring-before(substring($pi-file-value,2),'.html')"/>
	90	<!-- The build order -->
	91	<xsl:variable name="position" select="position()"/>
	92	<xsl:variable name="order">
	93	<xsl:choose>
	94	<xsl:when test="string-length($position) = 1">
	95	<xsl:text>00</xsl:text>
	96	<xsl:value-of select="$position"/>
	97	</xsl:when>
	98	<xsl:when test="string-length($position) = 2">
	99	<xsl:text>0</xsl:text>
	100	<xsl:value-of select="$position"/>
	101	</xsl:when>
	102	<xsl:otherwise>
	103	<xsl:value-of select="$position"/>
	104	</xsl:otherwise>
	105	</xsl:choose>
	106	</xsl:variable>
	107	<!-- Inclusion of package manager scriptlets -->
	108	<xsl:if test="@id='ch-tools-stripping' and $pkgmngt='y'">
	109	<xsl:apply-templates
[575bcf3]	110	select="document('packageManager.xml')//sect1[contains(@id,'ch-tools')]"
[7072e1f]	111	mode="pkgmngt">
[575bcf3]	112	<xsl:with-param name="order" select="$order"/>
[7072e1f]	113	<xsl:with-param name="dirname" select="$dirname"/>
	114	</xsl:apply-templates>
	115	</xsl:if>
	116	<xsl:if test="@id='ch-system-strippingagain' and $pkgmngt='y'">
	117	<xsl:apply-templates
[575bcf3]	118	select="document('packageManager.xml')//sect1[contains(@id,'ch-system')]"
[7072e1f]	119	mode="pkgmngt">
[575bcf3]	120	<xsl:with-param name="order" select="$order"/>
[7072e1f]	121	<xsl:with-param name="dirname" select="$dirname"/>
	122	</xsl:apply-templates>
	123	</xsl:if>
	124	<!-- Creating dirs and files -->
	125	<exsl:document href="{$dirname}/{$order}-{$filename}" method="text">
	126	<xsl:choose>
	127	<xsl:when test="@id='ch-system-creatingdirs' or
	128	@id='ch-system-createfiles' or
	129	@id='ch-system-strippingagain'">
	130	<xsl:text>#!/tools/bin/bash set +h </xsl:text>
	131	</xsl:when>
	132	<xsl:otherwise>
	133	<xsl:text>#!/bin/bash set +h </xsl:text>
	134	</xsl:otherwise>
	135	</xsl:choose>
	136	<xsl:if test="not(@id='ch-tools-stripping') and
	137	not(@id='ch-system-strippingagain')">
	138	<xsl:text>set -e </xsl:text>
	139	</xsl:if>
	140	<xsl:text> </xsl:text>
	141	<xsl:if test="sect2[@role='installation']">
	142	<xsl:text>cd $PKGDIR </xsl:text>
	143	</xsl:if>
[f0a31de]	144	<xsl:apply-templates select="sect2\|
	145	screen[not(@role) or
	146	@role!='nodump']/userinput"/>
[e6e0c85]	147	<xsl:if test="@id='ch-system-creatingdirs' and $pkgmngt='y'">
[f0a31de]	148	<xsl:apply-templates
	149	select="document('packageManager.xml')//sect1[
	150	@id='ch-pkgmngt-creatingdirs'
[e6e0c85]	151	]//userinput"
	152	mode="pkgmngt"/>
[f0a31de]	153	</xsl:if>
[e6e0c85]	154	<xsl:if test="@id='ch-system-createfiles' and $pkgmngt='y'">
[f0a31de]	155	<xsl:apply-templates
	156	select="document('packageManager.xml')//sect1[
	157	@id='ch-pkgmngt-createfiles'
[e6e0c85]	158	]//userinput"
	159	mode="pkgmngt"/>
[f0a31de]	160	</xsl:if>
[d68eb1b]	161	<xsl:text>echo -e "\n\nTotalseconds: $SECONDS\n" </xsl:text>
[f0a31de]	162	<xsl:text>exit </xsl:text>
	163	</exsl:document>
	164	</xsl:if>
	165	</xsl:template>
	166
	167	<xsl:template match="sect2">
	168	<xsl:apply-templates
	169	select=".//screen[not(@role) or
	170	@role != 'nodump']/userinput[
	171	@remap = 'pre' or
	172	@remap = 'configure' or
	173	@remap = 'make' or
	174	@remap = 'test' and
[f2e80ac]	175	not(current()/../@id='ch-tools-dejagnu') and
	176	not(current()/../@id='ch-system-systemd')]"/>
[f0a31de]	177	<xsl:if
	178	test="ancestor::chapter[@id != 'chapter-temporary-tools'] and
	179	$pkgmngt = 'y' and
	180	descendant::screen[not(@role) or
	181	@role != 'nodump']/userinput[
	182	@remap='install']">
	183	<xsl:text>mkdir -pv $PKG_DEST/{boot,etc,lib,bin,sbin}
[7072e1f]	184	mkdir -pv $PKG_DEST/usr/{lib,bin,sbin,include}
	185	mkdir -pv $PKG_DEST/usr/share/{doc,info,man}
	186	mkdir -pv $PKG_DEST/usr/share/man/man{1..8}
	187	ln -sv share/{man,doc,info} $PKG_DEST/usr
	188	case $(uname -m) in
	189	x86_64) ln -sv lib $PKG_DEST/lib64 && ln -sv lib $PKG_DEST/usr/lib64 ;;
	190	esac
	191	</xsl:text>
[f0a31de]	192	</xsl:if>
	193	<xsl:if test="../@id = 'ch-system-glibc' and
[90f304c]	194	@role='installation' and
	195	$pkgmngt = 'y'">
[f0a31de]	196	<xsl:text>mkdir -pv $PKG_DEST/usr/include/{rpc,rpcsvc}
[7072e1f]	197	</xsl:text>
[f0a31de]	198	</xsl:if>
	199	<xsl:apply-templates
	200	select=".//screen[not(@role) or
	201	@role != 'nodump']/userinput[@remap = 'install']"/>
	202	<xsl:if test="ancestor::chapter[@id != 'chapter-temporary-tools'] and
	203	$pkgmngt = 'y' and
	204	descendant::screen[not(@role) or
	205	@role != 'nodump']/userinput[
	206	@remap='install']">
	207	<xsl:if test="../@id = 'ch-system-man-pages'">
[560bef1]	208	<!-- these files are provided by the shadow package -->
[7072e1f]	209	<xsl:text>rm -fv $PKG_DEST/usr/share/man/{man3/getspnam.3,man5/passwd.5}
[560bef1]	210	</xsl:text>
	211	</xsl:if>
	212	<!-- Attr man/man2 pages are already installed by man-pages. As of
[00313dd]	213	March 2013, they are the same pages.
	214	November 2015: now they are more accurate
	215	in man-pages, and the man5 section is also in man-pages... -->
[560bef1]	216	<xsl:if test="../@id = 'ch-system-attr'">
	217	<xsl:text>rm -fv $PKG_DEST/usr/share/man/man2/*
[00313dd]	218	rm -fv $PKG_DEST/usr/share/man/man5/*
[a983256]	219	</xsl:text>
	220	</xsl:if>
	221	<!-- nologin is installed by util-linux. remove it from shadow -->
	222	<xsl:if test="../@id = 'ch-system-shadow'">
	223	<xsl:text>rm -fv $PKG_DEST/usr/share/man/man8/nologin.8
	224	rm -fv $PKG_DEST/sbin/nologin
[7072e1f]	225	</xsl:text>
[f0a31de]	226	</xsl:if>
	227	<xsl:text>rm -fv $PKG_DEST/{,usr/}lib64
[7072e1f]	228	rm -fv $PKG_DEST/usr/{man,doc,info}
	229	for dir in $PKG_DEST/usr/share/man/man{1..8}; do
	230	[[ -z $(ls $dir) ]] && rmdir -v $dir
	231	done
	232	for dir in $PKG_DEST/usr/share/{doc,info,man}; do
	233	[[ -z $(ls $dir) ]] && rmdir -v $dir
	234	done
	235	for dir in $PKG_DEST/usr/{lib,bin,sbin,include}; do
	236	[[ -z $(ls $dir) ]] && rmdir -v $dir
	237	done
	238	for dir in $PKG_DEST/{boot,etc,lib,bin,sbin}; do
	239	[[ -z $(ls $dir) ]] && rmdir -v $dir
	240	done
	241	packInstall
	242	rm -rf $PKG_DEST
	243	</xsl:text>
[f0a31de]	244	</xsl:if>
	245	<xsl:if test="$testsuite='3' and
	246	../@id='ch-tools-glibc' and
	247	@role='installation'">
	248	<xsl:copy-of select="//userinput[@remap='locale-test']"/>
	249	<xsl:text> </xsl:text>
	250	</xsl:if>
	251	<xsl:if test="../@id='ch-system-glibc' and @role='installation'">
	252	<xsl:choose>
	253	<xsl:when test="$full-locale='y'">
	254	<xsl:copy-of select="//userinput[@remap='locale-full']"/>
	255	<xsl:text> </xsl:text>
	256	</xsl:when>
	257	<xsl:otherwise>
	258	<xsl:copy-of select="//userinput[@remap='locale-test']"/>
	259	<xsl:text> </xsl:text>
	260	<xsl:if test="not(contains(string(//userinput[@remap='locale-test']),$lang)) and $lang!='C' and $lang!='POSIX'">
	261	<xsl:text>if LOCALE=`grep "</xsl:text>
	262	<xsl:value-of select="$lang"/>
	263	<xsl:text>/" $PKGDIR/localedata/SUPPORTED`; then
[b339c94]	264	CHARMAP=`echo $LOCALE \| sed 's,[^/]/\([^ ]\) [\],\1,'`
	265	INPUT=`echo $LOCALE \| sed 's,[/.].*,,'`
	266	LOCALE=`echo $LOCALE \| sed 's,/.*,,'`
	267	localedef -i $INPUT -f $CHARMAP $LOCALE
	268	fi
	269	</xsl:text>
[f0a31de]	270	</xsl:if>
	271	</xsl:otherwise>
	272	</xsl:choose>
[c4cf6de]	273	</xsl:if>
[f0a31de]	274	<xsl:apply-templates
	275	select=".//screen[
	276	not(@role) or
	277	@role != 'nodump'
	278	]/userinput[
[f2e80ac]	279	not(@remap) or
	280	@remap='adjust' or
	281	@remap='test' and current()/../@id='ch-tools-dejagnu' or
	282	@remap='test' and current()/../@id='ch-system-systemd'
[f0a31de]	283	]"/>
[557fe91]	284	</xsl:template>
	285
[f0a31de]	286	<xsl:template match="sect1" mode="pkgmngt">
[7072e1f]	287	<xsl:param name="dirname" select="chapter05"/>
	288	<!-- The build order -->
[575bcf3]	289	<xsl:param name="order" select="062"/>
[7072e1f]	290	<!-- The file names -->
	291	<xsl:variable name="pi-file" select="processing-instruction('dbhtml')"/>
	292	<xsl:variable name="pi-file-value" select="substring-after($pi-file,'filename=')"/>
	293	<xsl:variable name="filename" select="substring-before(substring($pi-file-value,2),'.html')"/>
	294	<!-- Creating dirs and files -->
[8099885]	295	<xsl:if test="count(descendant::screen/userinput) > 0 and
	296	count(descendant::screen/userinput) >
	297	count(descendant::screen[@role='nodump'])">
	298	<exsl:document href="{$dirname}/{$order}-{position()}-{$filename}"
	299	method="text">
	300	<xsl:text>#!/bin/bash
[7072e1f]	301	set +h
	302	set -e
	303
	304	cd $PKGDIR
	305	</xsl:text>
[8099885]	306	<xsl:apply-templates
	307	select=".//screen[not(@role) or
	308	@role != 'nodump']/userinput[@remap != 'adjust']"
[7072e1f]	309	mode="pkgmngt"/>
[8099885]	310	<xsl:if test="$dirname = 'chapter06'">
	311	<xsl:text>packInstall
[7072e1f]	312	rm -rf $PKG_DEST
	313	</xsl:text>
[8099885]	314	</xsl:if>
	315	<xsl:apply-templates
	316	select=".//screen[not(@role) or
	317	@role != 'nodump'
	318	]/userinput[not(@remap) or
	319	@remap='adjust'
[7072e1f]	320	]"
	321	mode="pkgmngt"/>
[8099885]	322	<xsl:text>
[7072e1f]	323	echo -e "\n\nTotalseconds: $SECONDS\n"
	324	exit
	325	</xsl:text>
[8099885]	326	</exsl:document>
	327	</xsl:if>
[557fe91]	328	</xsl:template>
	329
[7072e1f]	330	<xsl:template match="userinput" mode="pkgmngt">
	331	<xsl:apply-templates/>
	332	<xsl:text> </xsl:text>
	333	</xsl:template>
	334
	335	<xsl:template match="userinput">
[3eb60fa]	336	<xsl:choose>
[fd691b4]	337	<!-- Copying the kernel config file -->
	338	<xsl:when test="string() = 'make mrproper'">
	339	<xsl:text>make mrproper </xsl:text>
[7072e1f]	340	<xsl:if test="ancestor::sect1[@id='ch-bootable-kernel']">
[bcfb3bf]	341	<xsl:text>cp -v ../kernel-config .config </xsl:text>
	342	</xsl:if>
[92568bf]	343	</xsl:when>
[7072e1f]	344	<!-- test instructions -->
	345	<xsl:when test="@remap = 'test'">
[4afcedb]	346	<xsl:choose>
	347	<xsl:when test="$testsuite = '0'"/>
	348	<xsl:when test="$testsuite = '1' and
	349	not(ancestor::sect1[@id='ch-system-gcc']) and
	350	not(ancestor::sect1[@id='ch-system-glibc']) and
[7072e1f]	351	not(ancestor::sect1[@id='ch-system-gmp']) and
	352	not(ancestor::sect1[@id='ch-system-mpfr']) and
[4afcedb]	353	not(ancestor::sect1[@id='ch-system-binutils'])"/>
	354	<xsl:when test="$testsuite = '2' and
	355	ancestor::chapter[@id='chapter-temporary-tools']"/>
	356	<xsl:otherwise>
	357	<xsl:choose>
	358	<xsl:when test="$bomb-testsuite = 'n'">
[7072e1f]	359	<xsl:choose>
	360	<!-- special case for glibc -->
	361	<xsl:when test="contains(string(), 'glibc-check-log')">
	362	<xsl:value-of
	363	select="substring-before(string(),'2>&1')"/>
	364	<xsl:text>>> $TEST_LOG 2>&1 \|\| true </xsl:text>
	365	</xsl:when>
[e40a68e]	366	<!-- special case for procps-ng -->
	367	<xsl:when test="contains(string(), 'pushd')">
	368	<xsl:text>{ </xsl:text>
	369	<xsl:apply-templates/>
	370	<xsl:text>; } >> $TEST_LOG 2>&1 \|\| true </xsl:text>
	371	</xsl:when>
[7072e1f]	372	<xsl:when test="contains(string(), 'make -k')">
	373	<xsl:apply-templates/>
	374	<xsl:text> >> $TEST_LOG 2>&1 \|\| true </xsl:text>
	375	</xsl:when>
	376	<xsl:when test="contains(string(), 'make')">
	377	<xsl:value-of select="substring-before(string(),'make')"/>
	378	<xsl:text>make -k</xsl:text>
	379	<xsl:value-of select="substring-after(string(),'make')"/>
	380	<xsl:text> >> $TEST_LOG 2>&1 \|\| true </xsl:text>
	381	</xsl:when>
	382	<xsl:otherwise>
	383	<xsl:apply-templates/>
	384	<xsl:if test="not(contains(string(), '>>'))">
	385	<xsl:text> >> $TEST_LOG 2>&1</xsl:text>
	386	</xsl:if>
	387	<xsl:text> </xsl:text>
	388	</xsl:otherwise>
	389	</xsl:choose>
[4afcedb]	390	</xsl:when>
	391	<xsl:otherwise>
[7072e1f]	392	<!-- bomb-testsuite != 'n'-->
	393	<xsl:choose>
	394	<!-- special case for glibc -->
	395	<xsl:when test="contains(string(), 'glibc-check-log')">
	396	<xsl:value-of
	397	select="substring-before(string(),'2>&1')"/>
[2c9a16b]	398	<xsl:text>>> $TEST_LOG 2>&1 \|\| true </xsl:text>
[7072e1f]	399	</xsl:when>
[e40a68e]	400	<!-- special case for gmp -->
[f663589]	401	<xsl:when test="contains(string(), 'tee gmp-check-log')">
	402	<xsl:text>(</xsl:text>
	403	<xsl:apply-templates/>
	404	<xsl:text>>> $TEST_LOG 2>&1 && exit $PIPESTATUS) </xsl:text>
	405	</xsl:when>
[e40a68e]	406	<!-- special case for procps-ng -->
	407	<xsl:when test="contains(string(), 'pushd')">
	408	<xsl:text>{ </xsl:text>
	409	<xsl:apply-templates/>
	410	<xsl:text>; } >> $TEST_LOG 2>&1 </xsl:text>
	411	</xsl:when>
[2c9a16b]	412	<xsl:when test="contains(string(), 'make -k')">
	413	<xsl:apply-templates/>
	414	<xsl:text> >> $TEST_LOG 2>&1 \|\| true </xsl:text>
	415	</xsl:when>
[7072e1f]	416	<xsl:otherwise>
	417	<xsl:apply-templates/>
	418	<xsl:if test="not(contains(string(), '>>'))">
	419	<xsl:text> >> $TEST_LOG 2>&1</xsl:text>
	420	</xsl:if>
	421	<xsl:text> </xsl:text>
	422	</xsl:otherwise>
	423	</xsl:choose>
[4afcedb]	424	</xsl:otherwise>
	425	</xsl:choose>
	426	</xsl:otherwise>
	427	</xsl:choose>
	428	</xsl:when>
[7072e1f]	429	<!-- End of test instructions -->
[fd691b4]	430	<!-- Don't stop on strip run -->
	431	<xsl:when test="contains(string(),'strip ')">
[3eb60fa]	432	<xsl:apply-templates/>
[fd691b4]	433	<xsl:text> \|\| true </xsl:text>
[1f025ca]	434	</xsl:when>
[7072e1f]	435	<!-- Package management -->
	436	<!-- Add $PKG_DEST to installation commands -->
	437	<xsl:when test="@remap='install' and
	438	not(ancestor::chapter[
	439	@id='chapter-temporary-tools'
	440	])">
	441	<xsl:choose>
	442	<xsl:when test="$pkgmngt='n'">
	443	<xsl:choose>
	444	<xsl:when test="contains(string(),'firmware,udev')">
	445	<xsl:text>if [[ ! -d /lib/udev/devices ]] ; then </xsl:text>
	446	<xsl:apply-templates/>
	447	<xsl:text> fi </xsl:text>
	448	</xsl:when>
	449	<xsl:otherwise>
	450	<xsl:apply-templates/>
	451	<xsl:text> </xsl:text>
	452	</xsl:otherwise>
	453	</xsl:choose>
	454	</xsl:when>
	455	<xsl:otherwise><!--pkgmngt = 'y'-->
	456	<xsl:choose>
	457	<xsl:when test="./literal">
	458	<xsl:call-template name="outputpkgdest">
[560bef1]	459	<xsl:with-param name="outputstring" select="text()[1]"/>
[7072e1f]	460	</xsl:call-template>
	461	<xsl:apply-templates select="literal"/>
	462	<xsl:call-template name="outputpkgdest">
[560bef1]	463	<xsl:with-param name="outputstring" select="text()[2]"/>
[7072e1f]	464	</xsl:call-template>
	465	</xsl:when>
	466	<xsl:otherwise>
	467	<xsl:call-template name="outputpkgdest">
	468	<xsl:with-param name="outputstring" select="string()"/>
	469	</xsl:call-template>
	470	</xsl:otherwise>
	471	</xsl:choose>
	472	</xsl:otherwise>
	473	</xsl:choose>
	474	</xsl:when>
[57ef0c1]	475	<!-- if package management, we should make an independant package for
	476	tzdata. -->
	477	<xsl:when test="contains(string(),'tzdata') and $pkgmngt='y'">
	478	<xsl:text>
	479	OLD_PKG_DEST=$PKG_DEST
	480	OLD_PKGDIR=$PKGDIR
[56d8426]	481	PKG_DEST=$(dirname $OLD_PKG_DEST)/001-tzdata
[57ef0c1]	482	PKGDIR=$(dirname $PKGDIR)/tzdata-</xsl:text>
	483	<xsl:copy-of select="substring-before(
	484	substring-after(string(),'tzdata'),
	485	'.tar')"/>
	486	<xsl:text>
	487	</xsl:text>
	488	<xsl:copy-of select="substring-before(string(),'ZONEINFO=')"/>
	489	<xsl:text>ZONEINFO=$PKG_DEST</xsl:text>
	490	<xsl:copy-of select="substring-after(string(),'ZONEINFO=')"/>
	491	<xsl:text>
	492	packInstall
	493	rm -rf $PKG_DEST
	494	PKG_DEST=$OLD_PKG_DEST
	495	unset OLD_PKG_DEST
	496	PKGDIR=$OLD_PKGDIR
	497	unset OLD_PKGDIR
	498	</xsl:text>
	499	</xsl:when><!-- addition for tzdata + package management -->
[7072e1f]	500	<!-- End addition for package management -->
[fd691b4]	501	<!-- The rest of commands -->
[1f025ca]	502	<xsl:otherwise>
	503	<xsl:apply-templates/>
[fd691b4]	504	<xsl:text> </xsl:text>
[1f025ca]	505	</xsl:otherwise>
	506	</xsl:choose>
	507	</xsl:template>
[7072e1f]	508
[557fe91]	509	<xsl:template match="replaceable">
[a41ce58]	510	<xsl:choose>
[2a54650]	511	<xsl:when test="ancestor::sect1[@id='ch-system-glibc']">
[877cc6a]	512	<xsl:value-of select="$timezone"/>
[2a54650]	513	</xsl:when>
[a41ce58]	514	<xsl:when test="ancestor::sect1[@id='ch-system-groff']">
[877cc6a]	515	<xsl:value-of select="$page"/>
[a41ce58]	516	</xsl:when>
[81a7fb8]	517	<xsl:when test="contains(string(.),'<ll>_<CC>')">
	518	<xsl:value-of select="$lang"/>
	519	</xsl:when>
[77fa8ba]	520	<xsl:when test="contains(string(.),'Domain')">
	521	<xsl:value-of select="$domain"/>
	522	</xsl:when>
	523	<xsl:when test="contains(string(.),'primary')">
	524	<xsl:value-of select="$nameserver1"/>
	525	</xsl:when>
	526	<xsl:when test="contains(string(.),'secondary')">
	527	<xsl:value-of select="$nameserver2"/>
	528	</xsl:when>
	529	<xsl:when test="contains(string(.),'192.168.1.1')">
	530	<xsl:value-of select="$ip"/>
	531	</xsl:when>
	532	<xsl:when test="contains(string(.),'HOSTNAME')">
	533	<xsl:value-of select="$hostname"/>
	534	<xsl:text>.</xsl:text>
	535	<xsl:value-of select="$domain"/>
	536	</xsl:when>
	537	<xsl:when test="contains(string(.),'alias')">
	538	<xsl:value-of select="$hostname"/>
	539	</xsl:when>
	540	<xsl:when test="contains(string(.),'<lfs>')">
	541	<xsl:value-of select="$hostname"/>
	542	</xsl:when>
[a41ce58]	543	<xsl:otherwise>
	544	<xsl:text>**EDITME</xsl:text>
	545	<xsl:apply-templates/>
	546	<xsl:text>EDITME**</xsl:text>
	547	</xsl:otherwise>
	548	</xsl:choose>
[557fe91]	549	</xsl:template>
[7072e1f]	550
[77fa8ba]	551	<xsl:template match="literal">
	552	<xsl:choose>
	553	<xsl:when test="contains(string(),'ONBOOT')">
	554	<xsl:call-template name="outputnet">
	555	<xsl:with-param name="netstring" select="string()"/>
	556	</xsl:call-template>
	557	</xsl:when>
	558	<xsl:otherwise>
	559	<xsl:apply-templates/>
	560	</xsl:otherwise>
	561	</xsl:choose>
	562	</xsl:template>
	563
	564	<xsl:template name="outputnet">
	565	<xsl:param name="netstring" select="''"/>
	566	<!-- We suppose that book example has the following values:
	567	- interface: eth0
[33ff403]	568	- ip: 192.168.1.2
	569	- gateway: 192.168.1.1
[77fa8ba]	570	- prefix: 24
	571	- broadcast: 192.168.1.255
	572	Change below if book changes -->
	573	<xsl:choose>
	574	<xsl:when test="contains($netstring,'eth0')">
	575	<xsl:call-template name="outputnet">
	576	<xsl:with-param name="netstring"
	577	select="substring-before($netstring,'eth0')"/>
	578	</xsl:call-template>
	579	<xsl:value-of select="$interface"/>
	580	<xsl:call-template name="outputnet">
	581	<xsl:with-param name="netstring"
	582	select="substring-after($netstring,'eth0')"/>
	583	</xsl:call-template>
	584	</xsl:when>
	585	<xsl:when test="contains($netstring,'192.168.1.1')">
	586	<xsl:call-template name="outputnet">
	587	<xsl:with-param name="netstring"
	588	select="substring-before($netstring,'192.168.1.1')"/>
	589	</xsl:call-template>
[33ff403]	590	<xsl:value-of select="$gateway"/>
[77fa8ba]	591	<xsl:call-template name="outputnet">
	592	<xsl:with-param name="netstring"
	593	select="substring-after($netstring,'192.168.1.1')"/>
	594	</xsl:call-template>
	595	</xsl:when>
	596	<!-- must test this before the following, because 192.168.1.255 contains
	597	192.168.1.2! -->
	598	<xsl:when test="contains($netstring,'192.168.1.255')">
	599	<xsl:call-template name="outputnet">
	600	<xsl:with-param name="netstring"
	601	select="substring-before($netstring,'192.168.1.255')"/>
	602	</xsl:call-template>
	603	<xsl:value-of select="$broadcast"/>
	604	<xsl:call-template name="outputnet">
	605	<xsl:with-param name="netstring"
	606	select="substring-after($netstring,'192.168.1.255')"/>
	607	</xsl:call-template>
	608	</xsl:when>
	609	<xsl:when test="contains($netstring,'192.168.1.2')">
	610	<xsl:call-template name="outputnet">
	611	<xsl:with-param name="netstring"
	612	select="substring-before($netstring,'192.168.1.2')"/>
	613	</xsl:call-template>
[33ff403]	614	<xsl:value-of select="$ip"/>
[77fa8ba]	615	<xsl:call-template name="outputnet">
	616	<xsl:with-param name="netstring"
	617	select="substring-after($netstring,'192.168.1.2')"/>
	618	</xsl:call-template>
	619	</xsl:when>
	620	<xsl:when test="contains($netstring,'24')">
	621	<xsl:call-template name="outputnet">
	622	<xsl:with-param name="netstring"
	623	select="substring-before($netstring,'24')"/>
	624	</xsl:call-template>
	625	<xsl:value-of select="$prefix"/>
	626	<xsl:call-template name="outputnet">
	627	<xsl:with-param name="netstring"
	628	select="substring-after($netstring,'24')"/>
	629	</xsl:call-template>
	630	</xsl:when>
	631	<xsl:otherwise>
	632	<xsl:value-of select="$netstring"/>
	633	</xsl:otherwise>
	634	</xsl:choose>
	635	</xsl:template>
	636
[7072e1f]	637	<xsl:template name="outputpkgdest">
	638	<xsl:param name="outputstring" select="foo"/>
	639	<xsl:choose>
	640	<xsl:when test="contains($outputstring,'make ')">
	641	<xsl:choose>
	642	<xsl:when test="not(starts-with($outputstring,'make'))">
	643	<xsl:call-template name="outputpkgdest">
	644	<xsl:with-param name="outputstring"
	645	select="substring-before($outputstring,'make')"/>
	646	</xsl:call-template>
	647	<xsl:call-template name="outputpkgdest">
	648	<xsl:with-param
	649	name="outputstring"
	650	select="substring-after($outputstring,
	651	substring-before($outputstring,'make'))"/>
	652	</xsl:call-template>
	653	</xsl:when>
	654	<xsl:otherwise>
	655	<xsl:choose>
	656	<!-- special cases (no DESTDIR) here -->
	657	<xsl:when test="ancestor::sect1[@id='ch-system-glibc']">
	658	<xsl:text>make install_root=$PKG_DEST -j1</xsl:text>
	659	<xsl:value-of
	660	select="substring-before(substring-after(string(),'make'),
	661	'install')"/>
	662	<xsl:text>install </xsl:text>
	663	</xsl:when>
	664	<xsl:when test="ancestor::sect1[@id='ch-system-bzip2']">
	665	<xsl:text>make PREFIX=$PKG_DEST/usr install </xsl:text>
	666	</xsl:when>
	667	<xsl:when test="ancestor::sect1[@id='ch-system-sysklogd']">
	668	<xsl:text>make BINDIR=$PKG_DEST/sbin prefix=$PKG_DEST install </xsl:text>
	669	</xsl:when>
	670	<xsl:when test="ancestor::sect1[@id='ch-system-iproute2']">
[b1f4a8d]	671	<xsl:text>make DESTDIR=$PKG_DEST DOCDIR=</xsl:text>
[7072e1f]	672	<xsl:value-of
[b1f4a8d]	673	select="substring-before(substring-after(string(),'DOCDIR='),
[7072e1f]	674	'install')"/>
	675	<xsl:text>install </xsl:text>
	676	</xsl:when>
	677	<xsl:when test="ancestor::sect1[@id='ch-system-sysvinit']">
	678	<xsl:text>make ROOT=$PKG_DEST</xsl:text>
	679	<xsl:value-of
	680	select="substring-before(substring-after(string(),'make'),
	681	'install')"/>
	682	<xsl:text>install </xsl:text>
	683	</xsl:when>
	684	<xsl:when test="ancestor::sect1[@id='ch-bootable-kernel']">
	685	<xsl:text>make INSTALL_MOD_PATH=$PKG_DEST</xsl:text>
	686	<xsl:value-of
	687	select="substring-before(substring-after(string(),'make'),
	688	'install')"/>
	689	<xsl:text>install </xsl:text>
	690	</xsl:when>
[560bef1]	691	<xsl:when test="ancestor::sect1[@id='ch-system-attr']">
	692	<xsl:text>DIST_ROOT=$PKG_DEST make</xsl:text>
	693	<xsl:call-template name="outputpkgdest">
	694	<xsl:with-param name="outputstring"
	695	select="substring-after($outputstring,'make')"/>
	696	</xsl:call-template>
	697	</xsl:when>
[7072e1f]	698	<xsl:otherwise>
[560bef1]	699	<xsl:text>make DESTDIR=$PKG_DEST</xsl:text>
[e6e0c85]	700	<xsl:call-template name="outputpkgdest">
[560bef1]	701	<xsl:with-param
[7072e1f]	702	name="outputstring"
	703	select="substring-after($outputstring,'make')"/>
[560bef1]	704	</xsl:call-template>
[7072e1f]	705	</xsl:otherwise>
	706	</xsl:choose>
	707	</xsl:otherwise>
	708	</xsl:choose>
	709	</xsl:when>
	710	<xsl:otherwise> <!-- no make in this string -->
	711	<xsl:choose>
	712	<xsl:when test="contains($outputstring,'>/') and
	713	not(contains(substring-before($outputstring,'>/'),' /'))">
	714	<xsl:value-of select="substring-before($outputstring,'>/')"/>
	715	<xsl:text>>$PKG_DEST/</xsl:text>
	716	<xsl:call-template name="outputpkgdest">
	717	<xsl:with-param name="outputstring" select="substring-after($outputstring,'>/')"/>
	718	</xsl:call-template>
	719	</xsl:when>
	720	<xsl:when test="contains($outputstring,' /')">
	721	<xsl:value-of select="substring-before($outputstring,' /')"/>
	722	<xsl:text> $PKG_DEST/</xsl:text>
	723	<xsl:call-template name="outputpkgdest">
	724	<xsl:with-param name="outputstring" select="substring-after($outputstring,' /')"/>
	725	</xsl:call-template>
	726	</xsl:when>
	727	<xsl:otherwise>
	728	<xsl:value-of select="$outputstring"/>
	729	<xsl:text> </xsl:text>
	730	</xsl:otherwise>
	731	</xsl:choose>
	732	</xsl:otherwise>
	733	</xsl:choose>
	734	</xsl:template>
[557fe91]	735	</xsl:stylesheet>

Note: See TracBrowser for help on using the repository browser.

Download in other formats: