Context Navigation

source: LFS/lfs.xsl@ 4195a40

2.4 ablfs-more legacy new_features trunk

Last change on this file since 4195a40 was b1f4a8d, checked in by Pierre Labastie <pierre@…>, 10 years ago
Fix installation of iproute2 when pkgmngt=y
Property mode set to `100644`
File size: 24.7 KB

Rev	Line
[7072e1f]	1	<?xml version="1.0" encoding="ISO-8859-1"?>
[db181c47]	2
[877cc6a]	3	<!-- $Id$ -->
	4
[7072e1f]	5	<xsl:stylesheet
	6	xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
	7	xmlns:exsl="http://exslt.org/common"
	8	extension-element-prefixes="exsl"
	9	version="1.0">
[557fe91]	10
[7072e1f]	11	<!-- use package management ?
	12	n = no, original behavior
	13	y = yes, add PKG_DEST to scripts in install commands of chapter06-08
	14	-->
	15	<xsl:param name="pkgmngt" select="n"/>
	16
[31d6944]	17	<!-- Run test suites?
	18	0 = none
	19	1 = only chapter06 Glibc, GCC and Binutils testsuites
	20	2 = all chapter06 testsuites
[28f4756]	21	3 = all chapter05 and chapter06 testsuites
	22	-->
[31d6944]	23	<xsl:param name="testsuite" select="1"/>
[01e51a1]	24
[28f4756]	25	<!-- Bomb on test suites failures?
[401f81e]	26	n = no, I want to build the full system and review the logs
	27	y = yes, bomb at the first test suite failure to can review the build dir
[28f4756]	28	-->
[401f81e]	29	<xsl:param name="bomb-testsuite" select="n"/>
[28f4756]	30
[7072e1f]	31	<!-- Install vim-lang package? OBSOLETE should always be 'n'-->
	32	<xsl:param name="vim-lang" select="n"/>
	33
[877cc6a]	34	<!-- Time zone -->
[a229600]	35	<xsl:param name="timezone" select="GMT"/>
[7072e1f]	36
[877cc6a]	37	<!-- Page size -->
	38	<xsl:param name="page" select="letter"/>
[7072e1f]	39
[877cc6a]	40	<!-- Locale settings -->
[a229600]	41	<xsl:param name="lang" select="C"/>
[b339c94]	42
	43	<!-- Install the whole set of locales -->
	44	<xsl:param name='full-locale' select='n'/>
[7072e1f]	45
[557fe91]	46	<xsl:template match="/">
	47	<xsl:apply-templates select="//sect1"/>
	48	</xsl:template>
[7072e1f]	49
[557fe91]	50	<xsl:template match="sect1">
[7072e1f]	51	<xsl:if test="(../@id='chapter-temporary-tools' or
[14eaa9f]	52	../@id='chapter-building-system' or
	53	../@id='chapter-bootscripts' or
	54	../@id='chapter-bootable') and
	55	count(descendant::screen/userinput) > 0 and
	56	count(descendant::screen/userinput) >
[d68eb1b]	57	count(descendant::screen[@role='nodump']) and
	58	count(descendant::screen/userinput) >
	59	count(descendant::screen/userinput[starts-with(string(),'chroot')])">
	60	<!-- The last condition is a hack to allow previous versions of the
	61	book where the chroot commands did not have role="nodump".
	62	It only works if the chroot command is the only one on the page -->
[c4cf6de]	63	<!-- The dirs names -->
	64	<xsl:variable name="pi-dir" select="../processing-instruction('dbhtml')"/>
	65	<xsl:variable name="pi-dir-value" select="substring-after($pi-dir,'dir=')"/>
	66	<xsl:variable name="quote-dir" select="substring($pi-dir-value,1,1)"/>
	67	<xsl:variable name="dirname" select="substring-before(substring($pi-dir-value,2),$quote-dir)"/>
[7072e1f]	68	<!-- The file names -->
	69	<xsl:variable name="pi-file" select="processing-instruction('dbhtml')"/>
	70	<xsl:variable name="pi-file-value" select="substring-after($pi-file,'filename=')"/>
	71	<xsl:variable name="filename" select="substring-before(substring($pi-file-value,2),'.html')"/>
	72	<!-- The build order -->
	73	<xsl:variable name="position" select="position()"/>
	74	<xsl:variable name="order">
	75	<xsl:choose>
	76	<xsl:when test="string-length($position) = 1">
	77	<xsl:text>00</xsl:text>
	78	<xsl:value-of select="$position"/>
	79	</xsl:when>
	80	<xsl:when test="string-length($position) = 2">
	81	<xsl:text>0</xsl:text>
	82	<xsl:value-of select="$position"/>
	83	</xsl:when>
	84	<xsl:otherwise>
	85	<xsl:value-of select="$position"/>
	86	</xsl:otherwise>
	87	</xsl:choose>
	88	</xsl:variable>
	89	<!-- Inclusion of package manager scriptlets -->
	90	<xsl:if test="@id='ch-tools-stripping' and $pkgmngt='y'">
	91	<xsl:apply-templates
[575bcf3]	92	select="document('packageManager.xml')//sect1[contains(@id,'ch-tools')]"
[7072e1f]	93	mode="pkgmngt">
[575bcf3]	94	<xsl:with-param name="order" select="$order"/>
[7072e1f]	95	<xsl:with-param name="dirname" select="$dirname"/>
	96	</xsl:apply-templates>
	97	</xsl:if>
	98	<xsl:if test="@id='ch-system-strippingagain' and $pkgmngt='y'">
	99	<xsl:apply-templates
[575bcf3]	100	select="document('packageManager.xml')//sect1[contains(@id,'ch-system')]"
[7072e1f]	101	mode="pkgmngt">
[575bcf3]	102	<xsl:with-param name="order" select="$order"/>
[7072e1f]	103	<xsl:with-param name="dirname" select="$dirname"/>
	104	</xsl:apply-templates>
	105	</xsl:if>
	106	<!-- Creating dirs and files -->
	107	<exsl:document href="{$dirname}/{$order}-{$filename}" method="text">
	108	<xsl:choose>
	109	<xsl:when test="@id='ch-system-creatingdirs' or
	110	@id='ch-system-createfiles' or
	111	@id='ch-system-strippingagain'">
	112	<xsl:text>#!/tools/bin/bash set +h </xsl:text>
	113	</xsl:when>
	114	<xsl:otherwise>
	115	<xsl:text>#!/bin/bash set +h </xsl:text>
	116	</xsl:otherwise>
	117	</xsl:choose>
	118	<xsl:if test="not(@id='ch-tools-stripping') and
	119	not(@id='ch-system-strippingagain')">
	120	<xsl:text>set -e </xsl:text>
	121	</xsl:if>
	122	<xsl:text> </xsl:text>
	123	<xsl:if test="sect2[@role='installation']">
	124	<xsl:text>cd $PKGDIR </xsl:text>
	125	</xsl:if>
[f0a31de]	126	<xsl:apply-templates select="sect2\|
	127	screen[not(@role) or
	128	@role!='nodump']/userinput"/>
[e6e0c85]	129	<xsl:if test="@id='ch-system-creatingdirs' and $pkgmngt='y'">
[f0a31de]	130	<xsl:apply-templates
	131	select="document('packageManager.xml')//sect1[
	132	@id='ch-pkgmngt-creatingdirs'
[e6e0c85]	133	]//userinput"
	134	mode="pkgmngt"/>
[f0a31de]	135	</xsl:if>
[e6e0c85]	136	<xsl:if test="@id='ch-system-createfiles' and $pkgmngt='y'">
[f0a31de]	137	<xsl:apply-templates
	138	select="document('packageManager.xml')//sect1[
	139	@id='ch-pkgmngt-createfiles'
[e6e0c85]	140	]//userinput"
	141	mode="pkgmngt"/>
[f0a31de]	142	</xsl:if>
[d68eb1b]	143	<xsl:text>echo -e "\n\nTotalseconds: $SECONDS\n" </xsl:text>
[f0a31de]	144	<xsl:text>exit </xsl:text>
	145	</exsl:document>
	146	</xsl:if>
	147	</xsl:template>
	148
	149	<xsl:template match="sect2">
	150	<xsl:apply-templates
	151	select=".//screen[not(@role) or
	152	@role != 'nodump']/userinput[
	153	@remap = 'pre' or
	154	@remap = 'configure' or
	155	@remap = 'make' or
	156	@remap = 'test' and
	157	not(current()/../@id='ch-tools-dejagnu')]"/>
	158	<xsl:if
	159	test="ancestor::chapter[@id != 'chapter-temporary-tools'] and
	160	$pkgmngt = 'y' and
	161	descendant::screen[not(@role) or
	162	@role != 'nodump']/userinput[
	163	@remap='install']">
	164	<xsl:text>mkdir -pv $PKG_DEST/{boot,etc,lib,bin,sbin}
[7072e1f]	165	mkdir -pv $PKG_DEST/usr/{lib,bin,sbin,include}
	166	mkdir -pv $PKG_DEST/usr/share/{doc,info,man}
	167	mkdir -pv $PKG_DEST/usr/share/man/man{1..8}
	168	ln -sv share/{man,doc,info} $PKG_DEST/usr
	169	case $(uname -m) in
	170	x86_64) ln -sv lib $PKG_DEST/lib64 && ln -sv lib $PKG_DEST/usr/lib64 ;;
	171	esac
	172	</xsl:text>
[f0a31de]	173	</xsl:if>
	174	<xsl:if test="../@id = 'ch-system-glibc' and
[90f304c]	175	@role='installation' and
	176	$pkgmngt = 'y'">
[f0a31de]	177	<xsl:text>mkdir -pv $PKG_DEST/usr/include/{rpc,rpcsvc}
[7072e1f]	178	</xsl:text>
[f0a31de]	179	</xsl:if>
	180	<xsl:apply-templates
	181	select=".//screen[not(@role) or
	182	@role != 'nodump']/userinput[@remap = 'install']"/>
	183	<xsl:if test="ancestor::chapter[@id != 'chapter-temporary-tools'] and
	184	$pkgmngt = 'y' and
	185	descendant::screen[not(@role) or
	186	@role != 'nodump']/userinput[
	187	@remap='install']">
	188	<xsl:if test="../@id = 'ch-system-man-pages'">
[560bef1]	189	<!-- these files are provided by the shadow package -->
[7072e1f]	190	<xsl:text>rm -fv $PKG_DEST/usr/share/man/{man3/getspnam.3,man5/passwd.5}
[560bef1]	191	</xsl:text>
	192	</xsl:if>
	193	<!-- Attr man/man2 pages are already installed by man-pages. As of
	194	March 2013, they are the same pages. Check it sometimes... -->
	195	<xsl:if test="../@id = 'ch-system-attr'">
	196	<xsl:text>rm -fv $PKG_DEST/usr/share/man/man2/*
[a983256]	197	</xsl:text>
	198	</xsl:if>
	199	<!-- nologin is installed by util-linux. remove it from shadow -->
	200	<xsl:if test="../@id = 'ch-system-shadow'">
	201	<xsl:text>rm -fv $PKG_DEST/usr/share/man/man8/nologin.8
	202	rm -fv $PKG_DEST/sbin/nologin
[7072e1f]	203	</xsl:text>
[f0a31de]	204	</xsl:if>
	205	<xsl:text>rm -fv $PKG_DEST/{,usr/}lib64
[7072e1f]	206	rm -fv $PKG_DEST/usr/{man,doc,info}
	207	for dir in $PKG_DEST/usr/share/man/man{1..8}; do
	208	[[ -z $(ls $dir) ]] && rmdir -v $dir
	209	done
	210	for dir in $PKG_DEST/usr/share/{doc,info,man}; do
	211	[[ -z $(ls $dir) ]] && rmdir -v $dir
	212	done
	213	for dir in $PKG_DEST/usr/{lib,bin,sbin,include}; do
	214	[[ -z $(ls $dir) ]] && rmdir -v $dir
	215	done
	216	for dir in $PKG_DEST/{boot,etc,lib,bin,sbin}; do
	217	[[ -z $(ls $dir) ]] && rmdir -v $dir
	218	done
	219	packInstall
	220	rm -rf $PKG_DEST
	221	</xsl:text>
[f0a31de]	222	</xsl:if>
	223	<xsl:if test="$testsuite='3' and
	224	../@id='ch-tools-glibc' and
	225	@role='installation'">
	226	<xsl:copy-of select="//userinput[@remap='locale-test']"/>
	227	<xsl:text> </xsl:text>
	228	</xsl:if>
	229	<xsl:if test="../@id='ch-system-glibc' and @role='installation'">
	230	<xsl:choose>
	231	<xsl:when test="$full-locale='y'">
	232	<xsl:copy-of select="//userinput[@remap='locale-full']"/>
	233	<xsl:text> </xsl:text>
	234	</xsl:when>
	235	<xsl:otherwise>
	236	<xsl:copy-of select="//userinput[@remap='locale-test']"/>
	237	<xsl:text> </xsl:text>
	238	<xsl:if test="not(contains(string(//userinput[@remap='locale-test']),$lang)) and $lang!='C' and $lang!='POSIX'">
	239	<xsl:text>if LOCALE=`grep "</xsl:text>
	240	<xsl:value-of select="$lang"/>
	241	<xsl:text>/" $PKGDIR/localedata/SUPPORTED`; then
[b339c94]	242	CHARMAP=`echo $LOCALE \| sed 's,[^/]/\([^ ]\) [\],\1,'`
	243	INPUT=`echo $LOCALE \| sed 's,[/.].*,,'`
	244	LOCALE=`echo $LOCALE \| sed 's,/.*,,'`
	245	localedef -i $INPUT -f $CHARMAP $LOCALE
	246	fi
	247	</xsl:text>
[f0a31de]	248	</xsl:if>
	249	</xsl:otherwise>
	250	</xsl:choose>
[c4cf6de]	251	</xsl:if>
[f0a31de]	252	<xsl:apply-templates
	253	select=".//screen[
	254	not(@role) or
	255	@role != 'nodump'
	256	]/userinput[
	257	not(@remap) or
	258	@remap='adjust' or
	259	@remap='test' and current()/../@id='ch-tools-dejagnu'
	260	]"/>
[557fe91]	261	</xsl:template>
	262
[f0a31de]	263	<xsl:template match="sect1" mode="pkgmngt">
[7072e1f]	264	<xsl:param name="dirname" select="chapter05"/>
	265	<!-- The build order -->
[575bcf3]	266	<xsl:param name="order" select="062"/>
[7072e1f]	267	<!-- The file names -->
	268	<xsl:variable name="pi-file" select="processing-instruction('dbhtml')"/>
	269	<xsl:variable name="pi-file-value" select="substring-after($pi-file,'filename=')"/>
	270	<xsl:variable name="filename" select="substring-before(substring($pi-file-value,2),'.html')"/>
	271	<!-- Creating dirs and files -->
[8099885]	272	<xsl:if test="count(descendant::screen/userinput) > 0 and
	273	count(descendant::screen/userinput) >
	274	count(descendant::screen[@role='nodump'])">
	275	<exsl:document href="{$dirname}/{$order}-{position()}-{$filename}"
	276	method="text">
	277	<xsl:text>#!/bin/bash
[7072e1f]	278	set +h
	279	set -e
	280
	281	cd $PKGDIR
	282	</xsl:text>
[8099885]	283	<xsl:apply-templates
	284	select=".//screen[not(@role) or
	285	@role != 'nodump']/userinput[@remap != 'adjust']"
[7072e1f]	286	mode="pkgmngt"/>
[8099885]	287	<xsl:if test="$dirname = 'chapter06'">
	288	<xsl:text>packInstall
[7072e1f]	289	rm -rf $PKG_DEST
	290	</xsl:text>
[8099885]	291	</xsl:if>
	292	<xsl:apply-templates
	293	select=".//screen[not(@role) or
	294	@role != 'nodump'
	295	]/userinput[not(@remap) or
	296	@remap='adjust'
[7072e1f]	297	]"
	298	mode="pkgmngt"/>
[8099885]	299	<xsl:text>
[7072e1f]	300	echo -e "\n\nTotalseconds: $SECONDS\n"
	301	exit
	302	</xsl:text>
[8099885]	303	</exsl:document>
	304	</xsl:if>
[557fe91]	305	</xsl:template>
	306
[7072e1f]	307	<xsl:template match="userinput" mode="pkgmngt">
	308	<xsl:apply-templates/>
	309	<xsl:text> </xsl:text>
	310	</xsl:template>
	311
	312	<xsl:template match="userinput">
[3eb60fa]	313	<xsl:choose>
[fd691b4]	314	<!-- Copying the kernel config file -->
	315	<xsl:when test="string() = 'make mrproper'">
	316	<xsl:text>make mrproper </xsl:text>
[7072e1f]	317	<xsl:if test="ancestor::sect1[@id='ch-bootable-kernel']">
[bcfb3bf]	318	<xsl:text>cp -v ../kernel-config .config </xsl:text>
	319	</xsl:if>
[92568bf]	320	</xsl:when>
[7072e1f]	321	<!-- test instructions -->
	322	<xsl:when test="@remap = 'test'">
[4afcedb]	323	<xsl:choose>
	324	<xsl:when test="$testsuite = '0'"/>
	325	<xsl:when test="$testsuite = '1' and
	326	not(ancestor::sect1[@id='ch-system-gcc']) and
	327	not(ancestor::sect1[@id='ch-system-glibc']) and
[7072e1f]	328	not(ancestor::sect1[@id='ch-system-gmp']) and
	329	not(ancestor::sect1[@id='ch-system-mpfr']) and
[4afcedb]	330	not(ancestor::sect1[@id='ch-system-binutils'])"/>
	331	<xsl:when test="$testsuite = '2' and
	332	ancestor::chapter[@id='chapter-temporary-tools']"/>
	333	<xsl:otherwise>
	334	<xsl:choose>
	335	<xsl:when test="$bomb-testsuite = 'n'">
[7072e1f]	336	<xsl:choose>
	337	<!-- special case for glibc -->
	338	<xsl:when test="contains(string(), 'glibc-check-log')">
	339	<xsl:value-of
	340	select="substring-before(string(),'2>&1')"/>
	341	<xsl:text>>> $TEST_LOG 2>&1 \|\| true </xsl:text>
	342	</xsl:when>
[e40a68e]	343	<!-- special case for procps-ng -->
	344	<xsl:when test="contains(string(), 'pushd')">
	345	<xsl:text>{ </xsl:text>
	346	<xsl:apply-templates/>
	347	<xsl:text>; } >> $TEST_LOG 2>&1 \|\| true </xsl:text>
	348	</xsl:when>
[7072e1f]	349	<xsl:when test="contains(string(), 'make -k')">
	350	<xsl:apply-templates/>
	351	<xsl:text> >> $TEST_LOG 2>&1 \|\| true </xsl:text>
	352	</xsl:when>
	353	<xsl:when test="contains(string(), 'make')">
	354	<xsl:value-of select="substring-before(string(),'make')"/>
	355	<xsl:text>make -k</xsl:text>
	356	<xsl:value-of select="substring-after(string(),'make')"/>
	357	<xsl:text> >> $TEST_LOG 2>&1 \|\| true </xsl:text>
	358	</xsl:when>
	359	<xsl:otherwise>
	360	<xsl:apply-templates/>
	361	<xsl:if test="not(contains(string(), '>>'))">
	362	<xsl:text> >> $TEST_LOG 2>&1</xsl:text>
	363	</xsl:if>
	364	<xsl:text> </xsl:text>
	365	</xsl:otherwise>
	366	</xsl:choose>
[4afcedb]	367	</xsl:when>
	368	<xsl:otherwise>
[7072e1f]	369	<!-- bomb-testsuite != 'n'-->
	370	<xsl:choose>
	371	<!-- special case for glibc -->
	372	<xsl:when test="contains(string(), 'glibc-check-log')">
	373	<xsl:value-of
	374	select="substring-before(string(),'2>&1')"/>
[2c9a16b]	375	<xsl:text>>> $TEST_LOG 2>&1 \|\| true </xsl:text>
[7072e1f]	376	</xsl:when>
[e40a68e]	377	<!-- special case for gmp -->
[f663589]	378	<xsl:when test="contains(string(), 'tee gmp-check-log')">
	379	<xsl:text>(</xsl:text>
	380	<xsl:apply-templates/>
	381	<xsl:text>>> $TEST_LOG 2>&1 && exit $PIPESTATUS) </xsl:text>
	382	</xsl:when>
[e40a68e]	383	<!-- special case for procps-ng -->
	384	<xsl:when test="contains(string(), 'pushd')">
	385	<xsl:text>{ </xsl:text>
	386	<xsl:apply-templates/>
	387	<xsl:text>; } >> $TEST_LOG 2>&1 </xsl:text>
	388	</xsl:when>
[2c9a16b]	389	<xsl:when test="contains(string(), 'make -k')">
	390	<xsl:apply-templates/>
	391	<xsl:text> >> $TEST_LOG 2>&1 \|\| true </xsl:text>
	392	</xsl:when>
[7072e1f]	393	<xsl:otherwise>
	394	<xsl:apply-templates/>
	395	<xsl:if test="not(contains(string(), '>>'))">
	396	<xsl:text> >> $TEST_LOG 2>&1</xsl:text>
	397	</xsl:if>
	398	<xsl:text> </xsl:text>
	399	</xsl:otherwise>
	400	</xsl:choose>
[4afcedb]	401	</xsl:otherwise>
	402	</xsl:choose>
	403	</xsl:otherwise>
	404	</xsl:choose>
	405	</xsl:when>
[7072e1f]	406	<!-- End of test instructions -->
[fd691b4]	407	<!-- Don't stop on strip run -->
	408	<xsl:when test="contains(string(),'strip ')">
[3eb60fa]	409	<xsl:apply-templates/>
[fd691b4]	410	<xsl:text> \|\| true </xsl:text>
[1f025ca]	411	</xsl:when>
[7072e1f]	412	<!-- Package management -->
	413	<!-- Add $PKG_DEST to installation commands -->
	414	<xsl:when test="@remap='install' and
	415	not(ancestor::chapter[
	416	@id='chapter-temporary-tools'
	417	])">
	418	<xsl:choose>
	419	<xsl:when test="$pkgmngt='n'">
	420	<xsl:choose>
	421	<xsl:when test="contains(string(),'firmware,udev')">
	422	<xsl:text>if [[ ! -d /lib/udev/devices ]] ; then </xsl:text>
	423	<xsl:apply-templates/>
	424	<xsl:text> fi </xsl:text>
	425	</xsl:when>
	426	<xsl:otherwise>
	427	<xsl:apply-templates/>
	428	<xsl:text> </xsl:text>
	429	</xsl:otherwise>
	430	</xsl:choose>
	431	</xsl:when>
	432	<xsl:otherwise><!--pkgmngt = 'y'-->
	433	<xsl:choose>
	434	<xsl:when test="./literal">
	435	<xsl:call-template name="outputpkgdest">
[560bef1]	436	<xsl:with-param name="outputstring" select="text()[1]"/>
[7072e1f]	437	</xsl:call-template>
	438	<xsl:apply-templates select="literal"/>
	439	<xsl:call-template name="outputpkgdest">
[560bef1]	440	<xsl:with-param name="outputstring" select="text()[2]"/>
[7072e1f]	441	</xsl:call-template>
	442	</xsl:when>
	443	<xsl:otherwise>
	444	<xsl:call-template name="outputpkgdest">
	445	<xsl:with-param name="outputstring" select="string()"/>
	446	</xsl:call-template>
	447	</xsl:otherwise>
	448	</xsl:choose>
	449	</xsl:otherwise>
	450	</xsl:choose>
	451	</xsl:when>
[57ef0c1]	452	<!-- if package management, we should make an independant package for
	453	tzdata. -->
	454	<xsl:when test="contains(string(),'tzdata') and $pkgmngt='y'">
	455	<xsl:text>
	456	OLD_PKG_DEST=$PKG_DEST
	457	OLD_PKGDIR=$PKGDIR
[56d8426]	458	PKG_DEST=$(dirname $OLD_PKG_DEST)/001-tzdata
[57ef0c1]	459	PKGDIR=$(dirname $PKGDIR)/tzdata-</xsl:text>
	460	<xsl:copy-of select="substring-before(
	461	substring-after(string(),'tzdata'),
	462	'.tar')"/>
	463	<xsl:text>
	464	</xsl:text>
	465	<xsl:copy-of select="substring-before(string(),'ZONEINFO=')"/>
	466	<xsl:text>ZONEINFO=$PKG_DEST</xsl:text>
	467	<xsl:copy-of select="substring-after(string(),'ZONEINFO=')"/>
	468	<xsl:text>
	469	packInstall
	470	rm -rf $PKG_DEST
	471	PKG_DEST=$OLD_PKG_DEST
	472	unset OLD_PKG_DEST
	473	PKGDIR=$OLD_PKGDIR
	474	unset OLD_PKGDIR
	475	</xsl:text>
	476	</xsl:when><!-- addition for tzdata + package management -->
[7072e1f]	477	<!-- End addition for package management -->
[fd691b4]	478	<!-- The rest of commands -->
[1f025ca]	479	<xsl:otherwise>
	480	<xsl:apply-templates/>
[fd691b4]	481	<xsl:text> </xsl:text>
[1f025ca]	482	</xsl:otherwise>
	483	</xsl:choose>
	484	</xsl:template>
[7072e1f]	485
[557fe91]	486	<xsl:template match="replaceable">
[a41ce58]	487	<xsl:choose>
[2a54650]	488	<xsl:when test="ancestor::sect1[@id='ch-system-glibc']">
[877cc6a]	489	<xsl:value-of select="$timezone"/>
[2a54650]	490	</xsl:when>
[a41ce58]	491	<xsl:when test="ancestor::sect1[@id='ch-system-groff']">
[877cc6a]	492	<xsl:value-of select="$page"/>
[a41ce58]	493	</xsl:when>
[81a7fb8]	494	<xsl:when test="contains(string(.),'<ll>_<CC>')">
	495	<xsl:value-of select="$lang"/>
	496	</xsl:when>
[a41ce58]	497	<xsl:otherwise>
	498	<xsl:text>**EDITME</xsl:text>
	499	<xsl:apply-templates/>
	500	<xsl:text>EDITME**</xsl:text>
	501	</xsl:otherwise>
	502	</xsl:choose>
[557fe91]	503	</xsl:template>
[7072e1f]	504
	505	<xsl:template name="outputpkgdest">
	506	<xsl:param name="outputstring" select="foo"/>
	507	<xsl:choose>
	508	<xsl:when test="contains($outputstring,'make ')">
	509	<xsl:choose>
	510	<xsl:when test="not(starts-with($outputstring,'make'))">
	511	<xsl:call-template name="outputpkgdest">
	512	<xsl:with-param name="outputstring"
	513	select="substring-before($outputstring,'make')"/>
	514	</xsl:call-template>
	515	<xsl:call-template name="outputpkgdest">
	516	<xsl:with-param
	517	name="outputstring"
	518	select="substring-after($outputstring,
	519	substring-before($outputstring,'make'))"/>
	520	</xsl:call-template>
	521	</xsl:when>
	522	<xsl:otherwise>
	523	<xsl:choose>
	524	<!-- special cases (no DESTDIR) here -->
	525	<xsl:when test="ancestor::sect1[@id='ch-system-glibc']">
	526	<xsl:text>make install_root=$PKG_DEST -j1</xsl:text>
	527	<xsl:value-of
	528	select="substring-before(substring-after(string(),'make'),
	529	'install')"/>
	530	<xsl:text>install </xsl:text>
	531	</xsl:when>
	532	<xsl:when test="ancestor::sect1[@id='ch-system-bzip2']">
	533	<xsl:text>make PREFIX=$PKG_DEST/usr install </xsl:text>
	534	</xsl:when>
	535	<xsl:when test="ancestor::sect1[@id='ch-system-sysklogd']">
	536	<xsl:text>make BINDIR=$PKG_DEST/sbin prefix=$PKG_DEST install </xsl:text>
	537	</xsl:when>
	538	<xsl:when test="ancestor::sect1[@id='ch-system-iproute2']">
[b1f4a8d]	539	<xsl:text>make DESTDIR=$PKG_DEST DOCDIR=</xsl:text>
[7072e1f]	540	<xsl:value-of
[b1f4a8d]	541	select="substring-before(substring-after(string(),'DOCDIR='),
[7072e1f]	542	'install')"/>
	543	<xsl:text>install </xsl:text>
	544	</xsl:when>
	545	<xsl:when test="ancestor::sect1[@id='ch-system-sysvinit']">
	546	<xsl:text>make ROOT=$PKG_DEST</xsl:text>
	547	<xsl:value-of
	548	select="substring-before(substring-after(string(),'make'),
	549	'install')"/>
	550	<xsl:text>install </xsl:text>
	551	</xsl:when>
	552	<xsl:when test="ancestor::sect1[@id='ch-bootable-kernel']">
	553	<xsl:text>make INSTALL_MOD_PATH=$PKG_DEST</xsl:text>
	554	<xsl:value-of
	555	select="substring-before(substring-after(string(),'make'),
	556	'install')"/>
	557	<xsl:text>install </xsl:text>
	558	</xsl:when>
[560bef1]	559	<xsl:when test="ancestor::sect1[@id='ch-system-attr']">
	560	<xsl:text>DIST_ROOT=$PKG_DEST make</xsl:text>
	561	<xsl:call-template name="outputpkgdest">
	562	<xsl:with-param name="outputstring"
	563	select="substring-after($outputstring,'make')"/>
	564	</xsl:call-template>
	565	</xsl:when>
[7072e1f]	566	<xsl:otherwise>
[560bef1]	567	<xsl:text>make DESTDIR=$PKG_DEST</xsl:text>
[e6e0c85]	568	<xsl:call-template name="outputpkgdest">
[560bef1]	569	<xsl:with-param
[7072e1f]	570	name="outputstring"
	571	select="substring-after($outputstring,'make')"/>
[560bef1]	572	</xsl:call-template>
[7072e1f]	573	</xsl:otherwise>
	574	</xsl:choose>
	575	</xsl:otherwise>
	576	</xsl:choose>
	577	</xsl:when>
	578	<xsl:otherwise> <!-- no make in this string -->
	579	<xsl:choose>
	580	<xsl:when test="contains($outputstring,'>/') and
	581	not(contains(substring-before($outputstring,'>/'),' /'))">
	582	<xsl:value-of select="substring-before($outputstring,'>/')"/>
	583	<xsl:text>>$PKG_DEST/</xsl:text>
	584	<xsl:call-template name="outputpkgdest">
	585	<xsl:with-param name="outputstring" select="substring-after($outputstring,'>/')"/>
	586	</xsl:call-template>
	587	</xsl:when>
	588	<xsl:when test="contains($outputstring,' /')">
	589	<xsl:value-of select="substring-before($outputstring,' /')"/>
	590	<xsl:text> $PKG_DEST/</xsl:text>
	591	<xsl:call-template name="outputpkgdest">
	592	<xsl:with-param name="outputstring" select="substring-after($outputstring,' /')"/>
	593	</xsl:call-template>
	594	</xsl:when>
	595	<xsl:otherwise>
	596	<xsl:value-of select="$outputstring"/>
	597	<xsl:text> </xsl:text>
	598	</xsl:otherwise>
	599	</xsl:choose>
	600	</xsl:otherwise>
	601	</xsl:choose>
	602	</xsl:template>
[557fe91]	603	</xsl:stylesheet>

Note: See TracBrowser for help on using the repository browser.

Download in other formats: