Context Navigation

source: LFS/lfs.xsl@ 54380e5

new_features

Last change on this file since 54380e5 was e43d0d0, checked in by Pierre Labastie <pierre@…>, 8 years ago
Test for FQDN in <replaceable> tags, instead of HOSTNAME, for the full name of the host. Adapted only to LFS-20170310 and up.
Property mode set to `100644`
File size: 37.6 KB

Rev	Line
[7072e1f]	1	<?xml version="1.0" encoding="ISO-8859-1"?>
[db181c47]	2
[877cc6a]	3	<!-- $Id$ -->
	4
[7072e1f]	5	<xsl:stylesheet
	6	xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
	7	xmlns:exsl="http://exslt.org/common"
	8	extension-element-prefixes="exsl"
	9	version="1.0">
[557fe91]	10
[77fa8ba]	11	<!-- Parameters -->
	12
[7072e1f]	13	<!-- use package management ?
	14	n = no, original behavior
	15	y = yes, add PKG_DEST to scripts in install commands of chapter06-08
	16	-->
[df42c7c]	17	<xsl:param name="pkgmngt" select="'n'"/>
	18
	19	<!-- Package management with "porg style" ?
	20	n = no, same as pkgmngt description above
	21	y = yes, wrap install commands of chapter06-08 into a bash function.
	22	note that pkgmngt must be 'y' in this case
	23	-->
	24	<xsl:param name="wrap-install" select='"n"'/>
[7072e1f]	25
[31d6944]	26	<!-- Run test suites?
	27	0 = none
[77fa8ba]	28	1 = only chapter06 critical testsuites
[31d6944]	29	2 = all chapter06 testsuites
[28f4756]	30	3 = all chapter05 and chapter06 testsuites
	31	-->
[31d6944]	32	<xsl:param name="testsuite" select="1"/>
[01e51a1]	33
[28f4756]	34	<!-- Bomb on test suites failures?
[401f81e]	35	n = no, I want to build the full system and review the logs
	36	y = yes, bomb at the first test suite failure to can review the build dir
[28f4756]	37	-->
[df42c7c]	38	<xsl:param name="bomb-testsuite" select="'n'"/>
[28f4756]	39
[7072e1f]	40	<!-- Install vim-lang package? OBSOLETE should always be 'n'-->
[df42c7c]	41	<xsl:param name="vim-lang" select="'n'"/>
[7072e1f]	42
[877cc6a]	43	<!-- Time zone -->
[df42c7c]	44	<xsl:param name="timezone" select="'GMT'"/>
[7072e1f]	45
[877cc6a]	46	<!-- Page size -->
[df42c7c]	47	<xsl:param name="page" select="'letter'"/>
[7072e1f]	48
[877cc6a]	49	<!-- Locale settings -->
[df42c7c]	50	<xsl:param name="lang" select="'C'"/>
[b339c94]	51
	52	<!-- Install the whole set of locales -->
[df42c7c]	53	<xsl:param name='full-locale' select='"n"'/>
[7072e1f]	54
[77fa8ba]	55	<!-- Hostname -->
	56	<xsl:param name='hostname' select='"HOSTNAME"'/>
	57
	58	<!-- Network parameters: interface, ip, gateway, prefix, broadcast, domain
	59	and nameservers -->
[df42c7c]	60	<xsl:param name='interface' select="'eth0'"/>
[77fa8ba]	61	<xsl:param name='ip' select='"10.0.2.9"'/>
	62	<xsl:param name='gateway' select='"10.0.2.2"'/>
	63	<xsl:param name='prefix' select='24'/>
	64	<xsl:param name='broadcast' select='"10.0.2.255"'/>
	65	<xsl:param name='domain' select='"lfs.org"'/>
	66	<xsl:param name='nameserver1' select='"10.0.2.3"'/>
	67	<xsl:param name='nameserver2' select='"8.8.8.8"'/>
	68
	69	<!-- End parameters -->
	70
[557fe91]	71	<xsl:template match="/">
	72	<xsl:apply-templates select="//sect1"/>
	73	</xsl:template>
[7072e1f]	74
[557fe91]	75	<xsl:template match="sect1">
[7072e1f]	76	<xsl:if test="(../@id='chapter-temporary-tools' or
[14eaa9f]	77	../@id='chapter-building-system' or
	78	../@id='chapter-bootscripts' or
	79	../@id='chapter-bootable') and
	80	count(descendant::screen/userinput) > 0 and
	81	count(descendant::screen/userinput) >
[d68eb1b]	82	count(descendant::screen[@role='nodump']) and
	83	count(descendant::screen/userinput) >
	84	count(descendant::screen/userinput[starts-with(string(),'chroot')])">
	85	<!-- The last condition is a hack to allow previous versions of the
	86	book where the chroot commands did not have role="nodump".
	87	It only works if the chroot command is the only one on the page -->
[c4cf6de]	88	<!-- The dirs names -->
	89	<xsl:variable name="pi-dir" select="../processing-instruction('dbhtml')"/>
	90	<xsl:variable name="pi-dir-value" select="substring-after($pi-dir,'dir=')"/>
	91	<xsl:variable name="quote-dir" select="substring($pi-dir-value,1,1)"/>
	92	<xsl:variable name="dirname" select="substring-before(substring($pi-dir-value,2),$quote-dir)"/>
[7072e1f]	93	<!-- The file names -->
	94	<xsl:variable name="pi-file" select="processing-instruction('dbhtml')"/>
	95	<xsl:variable name="pi-file-value" select="substring-after($pi-file,'filename=')"/>
	96	<xsl:variable name="filename" select="substring-before(substring($pi-file-value,2),'.html')"/>
	97	<!-- The build order -->
	98	<xsl:variable name="position" select="position()"/>
	99	<xsl:variable name="order">
	100	<xsl:choose>
	101	<xsl:when test="string-length($position) = 1">
	102	<xsl:text>00</xsl:text>
	103	<xsl:value-of select="$position"/>
	104	</xsl:when>
	105	<xsl:when test="string-length($position) = 2">
	106	<xsl:text>0</xsl:text>
	107	<xsl:value-of select="$position"/>
	108	</xsl:when>
	109	<xsl:otherwise>
	110	<xsl:value-of select="$position"/>
	111	</xsl:otherwise>
	112	</xsl:choose>
	113	</xsl:variable>
	114	<!-- Inclusion of package manager scriptlets -->
	115	<xsl:if test="@id='ch-tools-stripping' and $pkgmngt='y'">
	116	<xsl:apply-templates
[575bcf3]	117	select="document('packageManager.xml')//sect1[contains(@id,'ch-tools')]"
[7072e1f]	118	mode="pkgmngt">
[575bcf3]	119	<xsl:with-param name="order" select="$order"/>
[7072e1f]	120	<xsl:with-param name="dirname" select="$dirname"/>
	121	</xsl:apply-templates>
	122	</xsl:if>
	123	<xsl:if test="@id='ch-system-strippingagain' and $pkgmngt='y'">
	124	<xsl:apply-templates
[575bcf3]	125	select="document('packageManager.xml')//sect1[contains(@id,'ch-system')]"
[7072e1f]	126	mode="pkgmngt">
[575bcf3]	127	<xsl:with-param name="order" select="$order"/>
[7072e1f]	128	<xsl:with-param name="dirname" select="$dirname"/>
	129	</xsl:apply-templates>
	130	</xsl:if>
	131	<!-- Creating dirs and files -->
	132	<exsl:document href="{$dirname}/{$order}-{$filename}" method="text">
	133	<xsl:choose>
	134	<xsl:when test="@id='ch-system-creatingdirs' or
	135	@id='ch-system-createfiles' or
	136	@id='ch-system-strippingagain'">
	137	<xsl:text>#!/tools/bin/bash set +h </xsl:text>
	138	</xsl:when>
	139	<xsl:otherwise>
	140	<xsl:text>#!/bin/bash set +h </xsl:text>
	141	</xsl:otherwise>
	142	</xsl:choose>
	143	<xsl:if test="not(@id='ch-tools-stripping') and
	144	not(@id='ch-system-strippingagain')">
	145	<xsl:text>set -e </xsl:text>
	146	</xsl:if>
	147	<xsl:text> </xsl:text>
	148	<xsl:if test="sect2[@role='installation']">
	149	<xsl:text>cd $PKGDIR </xsl:text>
	150	</xsl:if>
[f0a31de]	151	<xsl:apply-templates select="sect2\|
	152	screen[not(@role) or
	153	@role!='nodump']/userinput"/>
[e6e0c85]	154	<xsl:if test="@id='ch-system-creatingdirs' and $pkgmngt='y'">
[f0a31de]	155	<xsl:apply-templates
	156	select="document('packageManager.xml')//sect1[
	157	@id='ch-pkgmngt-creatingdirs'
[e6e0c85]	158	]//userinput"
	159	mode="pkgmngt"/>
[f0a31de]	160	</xsl:if>
[e6e0c85]	161	<xsl:if test="@id='ch-system-createfiles' and $pkgmngt='y'">
[f0a31de]	162	<xsl:apply-templates
	163	select="document('packageManager.xml')//sect1[
	164	@id='ch-pkgmngt-createfiles'
[e6e0c85]	165	]//userinput"
	166	mode="pkgmngt"/>
[f0a31de]	167	</xsl:if>
[d68eb1b]	168	<xsl:text>echo -e "\n\nTotalseconds: $SECONDS\n" </xsl:text>
[f0a31de]	169	<xsl:text>exit </xsl:text>
	170	</exsl:document>
	171	</xsl:if>
	172	</xsl:template>
	173
	174	<xsl:template match="sect2">
	175	<xsl:apply-templates
	176	select=".//screen[not(@role) or
	177	@role != 'nodump']/userinput[
	178	@remap = 'pre' or
	179	@remap = 'configure' or
	180	@remap = 'make' or
	181	@remap = 'test' and
[f2e80ac]	182	not(current()/../@id='ch-tools-dejagnu') and
	183	not(current()/../@id='ch-system-systemd')]"/>
[f0a31de]	184	<xsl:if
	185	test="ancestor::chapter[@id != 'chapter-temporary-tools'] and
	186	$pkgmngt = 'y' and
	187	descendant::screen[not(@role) or
	188	@role != 'nodump']/userinput[
	189	@remap='install']">
[df42c7c]	190	<xsl:choose>
	191	<xsl:when test="$wrap-install='y'">
	192	<xsl:text>wrapInstall '
	193	</xsl:text>
	194	</xsl:when>
	195	<xsl:otherwise>
	196	<xsl:text>mkdir -pv $PKG_DEST/{boot,etc,lib,bin,sbin}
[7072e1f]	197	mkdir -pv $PKG_DEST/usr/{lib,bin,sbin,include}
	198	mkdir -pv $PKG_DEST/usr/share/{doc,info,man}
	199	mkdir -pv $PKG_DEST/usr/share/man/man{1..8}
	200	ln -sv share/{man,doc,info} $PKG_DEST/usr
	201	case $(uname -m) in
	202	x86_64) ln -sv lib $PKG_DEST/lib64 && ln -sv lib $PKG_DEST/usr/lib64 ;;
	203	esac
	204	</xsl:text>
[df42c7c]	205	</xsl:otherwise>
	206	</xsl:choose>
[f0a31de]	207	</xsl:if>
	208	<xsl:if test="../@id = 'ch-system-glibc' and
[90f304c]	209	@role='installation' and
[df42c7c]	210	$pkgmngt = 'y' and
	211	$wrap-install = 'n'">
[f0a31de]	212	<xsl:text>mkdir -pv $PKG_DEST/usr/include/{rpc,rpcsvc}
[7072e1f]	213	</xsl:text>
[f0a31de]	214	</xsl:if>
	215	<xsl:apply-templates
	216	select=".//screen[not(@role) or
	217	@role != 'nodump']/userinput[@remap = 'install']"/>
	218	<xsl:if test="ancestor::chapter[@id != 'chapter-temporary-tools'] and
	219	$pkgmngt = 'y' and
	220	descendant::screen[not(@role) or
	221	@role != 'nodump']/userinput[
	222	@remap='install']">
[df42c7c]	223	<xsl:choose>
	224	<xsl:when test="$wrap-install='y'">
	225	<xsl:if test="../@id = 'ch-system-man-pages'">
[560bef1]	226	<!-- these files are provided by the shadow package -->
[df42c7c]	227	<xsl:text>rm -fv /usr/share/man/{man3/getspnam.3,man5/passwd.5}
[560bef1]	228	</xsl:text>
[df42c7c]	229	</xsl:if>
[560bef1]	230	<!-- Attr man/man2 pages are already installed by man-pages. As of
[00313dd]	231	March 2013, they are the same pages.
	232	November 2015: now they are more accurate
	233	in man-pages, and the man5 section is also in man-pages... -->
[df42c7c]	234	<xsl:if test="../@id = 'ch-system-attr'">
	235	<xsl:text>rm -fv /usr/share/man/man2/*
	236	rm -fv /usr/share/man/man5/*
	237	</xsl:text>
	238	</xsl:if>
	239	<!-- nologin is installed by util-linux. remove it from shadow -->
	240	<xsl:if test="../@id = 'ch-system-shadow'">
	241	<xsl:text>rm -fv /usr/share/man/man8/nologin.8
	242	rm -fv /sbin/nologin
	243	</xsl:text>
	244	</xsl:if>
	245	<xsl:text>'
	246	packInstall
	247	</xsl:text>
	248	</xsl:when>
	249	<xsl:otherwise>
	250	<xsl:if test="../@id = 'ch-system-man-pages'">
	251	<!-- these files are provided by the shadow package -->
	252	<xsl:text>rm -fv $PKG_DEST/usr/share/man/{man3/getspnam.3,man5/passwd.5}
	253	</xsl:text>
	254	</xsl:if>
	255	<!-- Attr man/man2 pages are already installed by man-pages. As of
	256	March 2013, they are the same pages.
	257	November 2015: now they are more accurate
	258	in man-pages, and the man5 section is also in man-pages... -->
	259	<xsl:if test="../@id = 'ch-system-attr'">
	260	<xsl:text>rm -fv $PKG_DEST/usr/share/man/man2/*
[00313dd]	261	rm -fv $PKG_DEST/usr/share/man/man5/*
[a983256]	262	</xsl:text>
[df42c7c]	263	</xsl:if>
[a983256]	264	<!-- nologin is installed by util-linux. remove it from shadow -->
[df42c7c]	265	<xsl:if test="../@id = 'ch-system-shadow'">
	266	<xsl:text>rm -fv $PKG_DEST/usr/share/man/man8/nologin.8
[a983256]	267	rm -fv $PKG_DEST/sbin/nologin
[7072e1f]	268	</xsl:text>
[df42c7c]	269	</xsl:if>
	270	<xsl:text>rm -fv $PKG_DEST/{,usr/}lib64
[7072e1f]	271	rm -fv $PKG_DEST/usr/{man,doc,info}
	272	for dir in $PKG_DEST/usr/share/man/man{1..8}; do
	273	[[ -z $(ls $dir) ]] && rmdir -v $dir
	274	done
	275	for dir in $PKG_DEST/usr/share/{doc,info,man}; do
	276	[[ -z $(ls $dir) ]] && rmdir -v $dir
	277	done
	278	for dir in $PKG_DEST/usr/{lib,bin,sbin,include}; do
	279	[[ -z $(ls $dir) ]] && rmdir -v $dir
	280	done
	281	for dir in $PKG_DEST/{boot,etc,lib,bin,sbin}; do
	282	[[ -z $(ls $dir) ]] && rmdir -v $dir
	283	done
	284	packInstall
	285	rm -rf $PKG_DEST
	286	</xsl:text>
[df42c7c]	287	</xsl:otherwise>
	288	</xsl:choose>
[f0a31de]	289	</xsl:if>
	290	<xsl:if test="$testsuite='3' and
	291	../@id='ch-tools-glibc' and
	292	@role='installation'">
	293	<xsl:copy-of select="//userinput[@remap='locale-test']"/>
	294	<xsl:text> </xsl:text>
	295	</xsl:if>
	296	<xsl:if test="../@id='ch-system-glibc' and @role='installation'">
	297	<xsl:choose>
	298	<xsl:when test="$full-locale='y'">
	299	<xsl:copy-of select="//userinput[@remap='locale-full']"/>
	300	<xsl:text> </xsl:text>
	301	</xsl:when>
	302	<xsl:otherwise>
	303	<xsl:copy-of select="//userinput[@remap='locale-test']"/>
	304	<xsl:text> </xsl:text>
	305	<xsl:if test="not(contains(string(//userinput[@remap='locale-test']),$lang)) and $lang!='C' and $lang!='POSIX'">
	306	<xsl:text>if LOCALE=`grep "</xsl:text>
	307	<xsl:value-of select="$lang"/>
	308	<xsl:text>/" $PKGDIR/localedata/SUPPORTED`; then
[b339c94]	309	CHARMAP=`echo $LOCALE \| sed 's,[^/]/\([^ ]\) [\],\1,'`
	310	INPUT=`echo $LOCALE \| sed 's,[/.].*,,'`
	311	LOCALE=`echo $LOCALE \| sed 's,/.*,,'`
	312	localedef -i $INPUT -f $CHARMAP $LOCALE
	313	fi
	314	</xsl:text>
[f0a31de]	315	</xsl:if>
	316	</xsl:otherwise>
	317	</xsl:choose>
[c4cf6de]	318	</xsl:if>
[f0a31de]	319	<xsl:apply-templates
	320	select=".//screen[
	321	not(@role) or
	322	@role != 'nodump'
	323	]/userinput[
[f2e80ac]	324	not(@remap) or
	325	@remap='adjust' or
	326	@remap='test' and current()/../@id='ch-tools-dejagnu' or
	327	@remap='test' and current()/../@id='ch-system-systemd'
[f0a31de]	328	]"/>
[557fe91]	329	</xsl:template>
	330
[f0a31de]	331	<xsl:template match="sect1" mode="pkgmngt">
[7072e1f]	332	<xsl:param name="dirname" select="chapter05"/>
	333	<!-- The build order -->
[575bcf3]	334	<xsl:param name="order" select="062"/>
[7072e1f]	335	<!-- The file names -->
	336	<xsl:variable name="pi-file" select="processing-instruction('dbhtml')"/>
	337	<xsl:variable name="pi-file-value" select="substring-after($pi-file,'filename=')"/>
	338	<xsl:variable name="filename" select="substring-before(substring($pi-file-value,2),'.html')"/>
	339	<!-- Creating dirs and files -->
[8099885]	340	<xsl:if test="count(descendant::screen/userinput) > 0 and
	341	count(descendant::screen/userinput) >
	342	count(descendant::screen[@role='nodump'])">
	343	<exsl:document href="{$dirname}/{$order}-{position()}-{$filename}"
	344	method="text">
	345	<xsl:text>#!/bin/bash
[7072e1f]	346	set +h
	347	set -e
	348
	349	cd $PKGDIR
	350	</xsl:text>
[8099885]	351	<xsl:apply-templates
	352	select=".//screen[not(@role) or
	353	@role != 'nodump']/userinput[@remap != 'adjust']"
[7072e1f]	354	mode="pkgmngt"/>
[8099885]	355	<xsl:if test="$dirname = 'chapter06'">
	356	<xsl:text>packInstall
[df42c7c]	357	rm -rf "$PKG_DEST"
[7072e1f]	358	</xsl:text>
[8099885]	359	</xsl:if>
	360	<xsl:apply-templates
	361	select=".//screen[not(@role) or
	362	@role != 'nodump'
	363	]/userinput[not(@remap) or
	364	@remap='adjust'
[7072e1f]	365	]"
	366	mode="pkgmngt"/>
[8099885]	367	<xsl:text>
[7072e1f]	368	echo -e "\n\nTotalseconds: $SECONDS\n"
	369	exit
	370	</xsl:text>
[8099885]	371	</exsl:document>
	372	</xsl:if>
[557fe91]	373	</xsl:template>
	374
[7072e1f]	375	<xsl:template match="userinput" mode="pkgmngt">
	376	<xsl:apply-templates/>
	377	<xsl:text> </xsl:text>
	378	</xsl:template>
	379
	380	<xsl:template match="userinput">
[3eb60fa]	381	<xsl:choose>
[fd691b4]	382	<!-- Copying the kernel config file -->
	383	<xsl:when test="string() = 'make mrproper'">
	384	<xsl:text>make mrproper </xsl:text>
[7072e1f]	385	<xsl:if test="ancestor::sect1[@id='ch-bootable-kernel']">
[bcfb3bf]	386	<xsl:text>cp -v ../kernel-config .config </xsl:text>
	387	</xsl:if>
[92568bf]	388	</xsl:when>
[7072e1f]	389	<!-- test instructions -->
	390	<xsl:when test="@remap = 'test'">
[4afcedb]	391	<xsl:choose>
	392	<xsl:when test="$testsuite = '0'"/>
	393	<xsl:when test="$testsuite = '1' and
	394	not(ancestor::sect1[@id='ch-system-gcc']) and
	395	not(ancestor::sect1[@id='ch-system-glibc']) and
[7072e1f]	396	not(ancestor::sect1[@id='ch-system-gmp']) and
	397	not(ancestor::sect1[@id='ch-system-mpfr']) and
[4afcedb]	398	not(ancestor::sect1[@id='ch-system-binutils'])"/>
	399	<xsl:when test="$testsuite = '2' and
	400	ancestor::chapter[@id='chapter-temporary-tools']"/>
	401	<xsl:otherwise>
	402	<xsl:choose>
	403	<xsl:when test="$bomb-testsuite = 'n'">
[7072e1f]	404	<xsl:choose>
	405	<!-- special case for glibc -->
	406	<xsl:when test="contains(string(), 'glibc-check-log')">
	407	<xsl:value-of
	408	select="substring-before(string(),'2>&1')"/>
	409	<xsl:text>>> $TEST_LOG 2>&1 \|\| true </xsl:text>
	410	</xsl:when>
[e40a68e]	411	<!-- special case for procps-ng -->
	412	<xsl:when test="contains(string(), 'pushd')">
	413	<xsl:text>{ </xsl:text>
	414	<xsl:apply-templates/>
	415	<xsl:text>; } >> $TEST_LOG 2>&1 \|\| true </xsl:text>
	416	</xsl:when>
[7072e1f]	417	<xsl:when test="contains(string(), 'make -k')">
	418	<xsl:apply-templates/>
	419	<xsl:text> >> $TEST_LOG 2>&1 \|\| true </xsl:text>
	420	</xsl:when>
	421	<xsl:when test="contains(string(), 'make')">
	422	<xsl:value-of select="substring-before(string(),'make')"/>
	423	<xsl:text>make -k</xsl:text>
	424	<xsl:value-of select="substring-after(string(),'make')"/>
	425	<xsl:text> >> $TEST_LOG 2>&1 \|\| true </xsl:text>
	426	</xsl:when>
	427	<xsl:otherwise>
	428	<xsl:apply-templates/>
	429	<xsl:if test="not(contains(string(), '>>'))">
	430	<xsl:text> >> $TEST_LOG 2>&1</xsl:text>
	431	</xsl:if>
	432	<xsl:text> </xsl:text>
	433	</xsl:otherwise>
	434	</xsl:choose>
[4afcedb]	435	</xsl:when>
	436	<xsl:otherwise>
[7072e1f]	437	<!-- bomb-testsuite != 'n'-->
	438	<xsl:choose>
	439	<!-- special case for glibc -->
	440	<xsl:when test="contains(string(), 'glibc-check-log')">
	441	<xsl:value-of
	442	select="substring-before(string(),'2>&1')"/>
[2c9a16b]	443	<xsl:text>>> $TEST_LOG 2>&1 \|\| true </xsl:text>
[7072e1f]	444	</xsl:when>
[e40a68e]	445	<!-- special case for gmp -->
[f663589]	446	<xsl:when test="contains(string(), 'tee gmp-check-log')">
	447	<xsl:text>(</xsl:text>
	448	<xsl:apply-templates/>
	449	<xsl:text>>> $TEST_LOG 2>&1 && exit $PIPESTATUS) </xsl:text>
	450	</xsl:when>
[e40a68e]	451	<!-- special case for procps-ng -->
	452	<xsl:when test="contains(string(), 'pushd')">
	453	<xsl:text>{ </xsl:text>
	454	<xsl:apply-templates/>
	455	<xsl:text>; } >> $TEST_LOG 2>&1 </xsl:text>
	456	</xsl:when>
[2c9a16b]	457	<xsl:when test="contains(string(), 'make -k')">
	458	<xsl:apply-templates/>
	459	<xsl:text> >> $TEST_LOG 2>&1 \|\| true </xsl:text>
	460	</xsl:when>
[7072e1f]	461	<xsl:otherwise>
	462	<xsl:apply-templates/>
	463	<xsl:if test="not(contains(string(), '>>'))">
	464	<xsl:text> >> $TEST_LOG 2>&1</xsl:text>
	465	</xsl:if>
	466	<xsl:text> </xsl:text>
	467	</xsl:otherwise>
	468	</xsl:choose>
[4afcedb]	469	</xsl:otherwise>
	470	</xsl:choose>
	471	</xsl:otherwise>
	472	</xsl:choose>
	473	</xsl:when>
[7072e1f]	474	<!-- End of test instructions -->
[fd691b4]	475	<!-- Don't stop on strip run -->
	476	<xsl:when test="contains(string(),'strip ')">
[3eb60fa]	477	<xsl:apply-templates/>
[fd691b4]	478	<xsl:text> \|\| true </xsl:text>
[1f025ca]	479	</xsl:when>
[7072e1f]	480	<!-- Package management -->
	481	<!-- Add $PKG_DEST to installation commands -->
	482	<xsl:when test="@remap='install' and
	483	not(ancestor::chapter[
	484	@id='chapter-temporary-tools'
	485	])">
	486	<xsl:choose>
	487	<xsl:when test="$pkgmngt='n'">
	488	<xsl:choose>
	489	<xsl:when test="contains(string(),'firmware,udev')">
	490	<xsl:text>if [[ ! -d /lib/udev/devices ]] ; then </xsl:text>
	491	<xsl:apply-templates/>
	492	<xsl:text> fi </xsl:text>
	493	</xsl:when>
	494	<xsl:otherwise>
	495	<xsl:apply-templates/>
	496	<xsl:text> </xsl:text>
	497	</xsl:otherwise>
	498	</xsl:choose>
	499	</xsl:when>
[df42c7c]	500	<xsl:when test="$wrap-install='y'">
	501	<xsl:choose>
	502	<xsl:when test="./literal">
	503	<xsl:call-template name="output-wrap">
	504	<xsl:with-param name="commands" select="text()[1]"/>
	505	</xsl:call-template>
	506	<xsl:apply-templates select="literal"/>
	507	<xsl:call-template name="output-wrap">
	508	<xsl:with-param name="commands" select="text()[2]"/>
	509	</xsl:call-template>
	510	</xsl:when>
	511	<xsl:otherwise>
	512	<xsl:call-template name="output-wrap">
	513	<xsl:with-param name="commands" select="string()"/>
	514	</xsl:call-template>
	515	</xsl:otherwise>
	516	</xsl:choose>
	517	<xsl:text> </xsl:text>
	518	</xsl:when>
	519	<xsl:otherwise><!--pkgmngt = 'y' and wrap-install='n'-->
[7072e1f]	520	<xsl:choose>
	521	<xsl:when test="./literal">
	522	<xsl:call-template name="outputpkgdest">
[560bef1]	523	<xsl:with-param name="outputstring" select="text()[1]"/>
[7072e1f]	524	</xsl:call-template>
	525	<xsl:apply-templates select="literal"/>
	526	<xsl:call-template name="outputpkgdest">
[560bef1]	527	<xsl:with-param name="outputstring" select="text()[2]"/>
[7072e1f]	528	</xsl:call-template>
	529	</xsl:when>
	530	<xsl:otherwise>
	531	<xsl:call-template name="outputpkgdest">
	532	<xsl:with-param name="outputstring" select="string()"/>
	533	</xsl:call-template>
	534	</xsl:otherwise>
	535	</xsl:choose>
	536	</xsl:otherwise>
	537	</xsl:choose>
	538	</xsl:when>
[57ef0c1]	539	<!-- if package management, we should make an independant package for
	540	tzdata. -->
	541	<xsl:when test="contains(string(),'tzdata') and $pkgmngt='y'">
	542	<xsl:text>
[df42c7c]	543	OLD_PKG_DEST="$PKG_DEST"
[57ef0c1]	544	OLD_PKGDIR=$PKGDIR
[56d8426]	545	PKG_DEST=$(dirname $OLD_PKG_DEST)/001-tzdata
[57ef0c1]	546	PKGDIR=$(dirname $PKGDIR)/tzdata-</xsl:text>
	547	<xsl:copy-of select="substring-before(
	548	substring-after(string(),'tzdata'),
	549	'.tar')"/>
	550	<xsl:text>
	551	</xsl:text>
[df42c7c]	552	<xsl:choose>
	553	<xsl:when test="$wrap-install='n'">
	554	<xsl:copy-of select="substring-before(string(),'ZONEINFO=')"/>
	555	<xsl:text>ZONEINFO=$PKG_DEST</xsl:text>
	556	<xsl:copy-of select="substring-after(string(),'ZONEINFO=')"/>
	557	<xsl:text>
[57ef0c1]	558	packInstall
	559	rm -rf $PKG_DEST
[df42c7c]	560	</xsl:text>
	561	</xsl:when>
	562	<xsl:otherwise><!-- wrap-install='y' -->
	563	<xsl:copy-of select="substring-before(string(),'ZONEINFO=')"/>
	564	<xsl:text>
	565	wrapInstall '
	566	ZONEINFO=</xsl:text>
	567	<xsl:copy-of select="substring-after(string(),'ZONEINFO=')"/>
	568	<xsl:text>'
	569	packInstall
	570	</xsl:text>
	571	</xsl:otherwise>
	572	</xsl:choose>
	573	<xsl:text>
[57ef0c1]	574	PKG_DEST=$OLD_PKG_DEST
	575	unset OLD_PKG_DEST
	576	PKGDIR=$OLD_PKGDIR
	577	unset OLD_PKGDIR
	578	</xsl:text>
	579	</xsl:when><!-- addition for tzdata + package management -->
[7072e1f]	580	<!-- End addition for package management -->
[fd691b4]	581	<!-- The rest of commands -->
[1f025ca]	582	<xsl:otherwise>
	583	<xsl:apply-templates/>
[fd691b4]	584	<xsl:text> </xsl:text>
[1f025ca]	585	</xsl:otherwise>
	586	</xsl:choose>
	587	</xsl:template>
[7072e1f]	588
[557fe91]	589	<xsl:template match="replaceable">
[a41ce58]	590	<xsl:choose>
[2a54650]	591	<xsl:when test="ancestor::sect1[@id='ch-system-glibc']">
[877cc6a]	592	<xsl:value-of select="$timezone"/>
[2a54650]	593	</xsl:when>
[a41ce58]	594	<xsl:when test="ancestor::sect1[@id='ch-system-groff']">
[877cc6a]	595	<xsl:value-of select="$page"/>
[a41ce58]	596	</xsl:when>
[81a7fb8]	597	<xsl:when test="contains(string(.),'<ll>_<CC>')">
	598	<xsl:value-of select="$lang"/>
	599	</xsl:when>
[77fa8ba]	600	<xsl:when test="contains(string(.),'Domain')">
	601	<xsl:value-of select="$domain"/>
	602	</xsl:when>
	603	<xsl:when test="contains(string(.),'primary')">
	604	<xsl:value-of select="$nameserver1"/>
	605	</xsl:when>
	606	<xsl:when test="contains(string(.),'secondary')">
	607	<xsl:value-of select="$nameserver2"/>
	608	</xsl:when>
	609	<xsl:when test="contains(string(.),'192.168.1.1')">
	610	<xsl:value-of select="$ip"/>
	611	</xsl:when>
[e43d0d0]	612	<xsl:when test="contains(string(.),'192.168.0.2')">
	613	<xsl:value-of select="$ip"/>
	614	</xsl:when>
	615	<!-- Only adapted to LFS-20170310 and later -->
[77fa8ba]	616	<xsl:when test="contains(string(.),'HOSTNAME')">
	617	<xsl:value-of select="$hostname"/>
	618	</xsl:when>
[e43d0d0]	619	<xsl:when test="contains(string(.),'FQDN')">
[77fa8ba]	620	<xsl:value-of select="$hostname"/>
[e43d0d0]	621	<xsl:text>.</xsl:text>
	622	<xsl:value-of select="$domain"/>
[77fa8ba]	623	</xsl:when>
[e43d0d0]	624	<xsl:when test="contains(string(.),'alias')"/>
[77fa8ba]	625	<xsl:when test="contains(string(.),'<lfs>')">
	626	<xsl:value-of select="$hostname"/>
	627	</xsl:when>
[a41ce58]	628	<xsl:otherwise>
	629	<xsl:text>**EDITME</xsl:text>
	630	<xsl:apply-templates/>
	631	<xsl:text>EDITME**</xsl:text>
	632	</xsl:otherwise>
	633	</xsl:choose>
[557fe91]	634	</xsl:template>
[7072e1f]	635
[77fa8ba]	636	<xsl:template match="literal">
	637	<xsl:choose>
	638	<xsl:when test="contains(string(),'ONBOOT')">
	639	<xsl:call-template name="outputnet">
	640	<xsl:with-param name="netstring" select="string()"/>
	641	</xsl:call-template>
	642	</xsl:when>
[d8ddcfb]	643	<xsl:when test="contains(string(),'[Match]')">
	644	<xsl:call-template name="outputsysdnet">
	645	<xsl:with-param name="netstring" select="string()"/>
	646	</xsl:call-template>
	647	</xsl:when>
[77fa8ba]	648	<xsl:otherwise>
	649	<xsl:apply-templates/>
	650	</xsl:otherwise>
	651	</xsl:choose>
	652	</xsl:template>
	653
	654	<xsl:template name="outputnet">
	655	<xsl:param name="netstring" select="''"/>
	656	<!-- We suppose that book example has the following values:
	657	- interface: eth0
[33ff403]	658	- ip: 192.168.1.2
	659	- gateway: 192.168.1.1
[77fa8ba]	660	- prefix: 24
	661	- broadcast: 192.168.1.255
	662	Change below if book changes -->
	663	<xsl:choose>
	664	<xsl:when test="contains($netstring,'eth0')">
	665	<xsl:call-template name="outputnet">
	666	<xsl:with-param name="netstring"
	667	select="substring-before($netstring,'eth0')"/>
	668	</xsl:call-template>
	669	<xsl:value-of select="$interface"/>
	670	<xsl:call-template name="outputnet">
	671	<xsl:with-param name="netstring"
	672	select="substring-after($netstring,'eth0')"/>
	673	</xsl:call-template>
	674	</xsl:when>
	675	<xsl:when test="contains($netstring,'192.168.1.1')">
	676	<xsl:call-template name="outputnet">
	677	<xsl:with-param name="netstring"
	678	select="substring-before($netstring,'192.168.1.1')"/>
	679	</xsl:call-template>
[33ff403]	680	<xsl:value-of select="$gateway"/>
[77fa8ba]	681	<xsl:call-template name="outputnet">
	682	<xsl:with-param name="netstring"
	683	select="substring-after($netstring,'192.168.1.1')"/>
	684	</xsl:call-template>
	685	</xsl:when>
	686	<!-- must test this before the following, because 192.168.1.255 contains
	687	192.168.1.2! -->
	688	<xsl:when test="contains($netstring,'192.168.1.255')">
	689	<xsl:call-template name="outputnet">
	690	<xsl:with-param name="netstring"
	691	select="substring-before($netstring,'192.168.1.255')"/>
	692	</xsl:call-template>
	693	<xsl:value-of select="$broadcast"/>
	694	<xsl:call-template name="outputnet">
	695	<xsl:with-param name="netstring"
	696	select="substring-after($netstring,'192.168.1.255')"/>
	697	</xsl:call-template>
	698	</xsl:when>
	699	<xsl:when test="contains($netstring,'192.168.1.2')">
	700	<xsl:call-template name="outputnet">
	701	<xsl:with-param name="netstring"
	702	select="substring-before($netstring,'192.168.1.2')"/>
	703	</xsl:call-template>
[33ff403]	704	<xsl:value-of select="$ip"/>
[77fa8ba]	705	<xsl:call-template name="outputnet">
	706	<xsl:with-param name="netstring"
	707	select="substring-after($netstring,'192.168.1.2')"/>
	708	</xsl:call-template>
	709	</xsl:when>
	710	<xsl:when test="contains($netstring,'24')">
	711	<xsl:call-template name="outputnet">
	712	<xsl:with-param name="netstring"
	713	select="substring-before($netstring,'24')"/>
	714	</xsl:call-template>
	715	<xsl:value-of select="$prefix"/>
	716	<xsl:call-template name="outputnet">
	717	<xsl:with-param name="netstring"
	718	select="substring-after($netstring,'24')"/>
	719	</xsl:call-template>
	720	</xsl:when>
	721	<xsl:otherwise>
	722	<xsl:value-of select="$netstring"/>
	723	</xsl:otherwise>
	724	</xsl:choose>
	725	</xsl:template>
	726
[d8ddcfb]	727	<xsl:template name="outputsysdnet">
	728	<xsl:param name="netstring" select="''"/>
	729	<!-- We suppose that book example has the following values:
	730	- interface: eth0
	731	- ip: 192.168.0.2
	732	- gateway: 192.168.0.1
	733	- prefix: 24
	734	- DNS: 192.168.0.1
	735	- Domain: <Your Domain Name>
	736	and gateway comes before DNS. Change below if book changes -->
	737	<xsl:choose>
	738	<xsl:when test="contains($netstring,'eth0')">
	739	<xsl:call-template name="outputsysdnet">
	740	<xsl:with-param name="netstring"
	741	select="substring-before($netstring,'eth0')"/>
	742	</xsl:call-template>
	743	<xsl:value-of select="$interface"/>
	744	<xsl:call-template name="outputsysdnet">
	745	<xsl:with-param name="netstring"
	746	select="substring-after($netstring,'eth0')"/>
	747	</xsl:call-template>
	748	</xsl:when>
	749	<xsl:when test="contains($netstring,'192.168.0.1') and
	750	contains($netstring,'Gateway')">
	751	<xsl:call-template name="outputsysdnet">
	752	<xsl:with-param name="netstring"
	753	select="substring-before($netstring,'192.168.0.1')"/>
	754	</xsl:call-template>
	755	<xsl:value-of select="$gateway"/>
	756	<xsl:call-template name="outputsysdnet">
	757	<xsl:with-param name="netstring"
	758	select="substring-after($netstring,'192.168.0.1')"/>
	759	</xsl:call-template>
	760	</xsl:when>
	761	<xsl:when test="contains($netstring,'192.168.0.1') and
	762	not(contains($netstring,'Gateway'))">
	763	<xsl:call-template name="outputsysdnet">
	764	<xsl:with-param name="netstring"
	765	select="substring-before($netstring,'192.168.0.1')"/>
	766	</xsl:call-template>
	767	<xsl:value-of select="$nameserver1"/>
	768	<xsl:text>
	769	DNS=</xsl:text>
	770	<xsl:value-of select="$nameserver2"/>
	771	<xsl:call-template name="outputsysdnet">
	772	<xsl:with-param name="netstring"
	773	select="substring-after($netstring,'192.168.0.1')"/>
	774	</xsl:call-template>
	775	</xsl:when>
	776	<xsl:when test="contains($netstring,'192.168.0.2')">
	777	<xsl:call-template name="outputsysdnet">
	778	<xsl:with-param name="netstring"
	779	select="substring-before($netstring,'192.168.0.2')"/>
	780	</xsl:call-template>
	781	<xsl:value-of select="$ip"/>
	782	<xsl:call-template name="outputsysdnet">
	783	<xsl:with-param name="netstring"
	784	select="substring-after($netstring,'192.168.0.2')"/>
	785	</xsl:call-template>
	786	</xsl:when>
	787	<xsl:when test="contains($netstring,'24')">
	788	<xsl:call-template name="outputsysdnet">
	789	<xsl:with-param name="netstring"
	790	select="substring-before($netstring,'24')"/>
	791	</xsl:call-template>
	792	<xsl:value-of select="$prefix"/>
	793	<xsl:call-template name="outputsysdnet">
	794	<xsl:with-param name="netstring"
	795	select="substring-after($netstring,'24')"/>
	796	</xsl:call-template>
	797	</xsl:when>
	798	<xsl:when test="contains($netstring,'<Your Domain Name>')">
	799	<xsl:call-template name="outputsysdnet">
	800	<xsl:with-param name="netstring"
	801	select="substring-before($netstring,'<Your Domain Name>')"/>
	802	</xsl:call-template>
	803	<xsl:value-of select="$domain"/>
	804	<xsl:call-template name="outputsysdnet">
	805	<xsl:with-param name="netstring"
	806	select="substring-after($netstring,'<Your Domain Name>')"/>
	807	</xsl:call-template>
	808	</xsl:when>
	809	<xsl:otherwise>
	810	<xsl:value-of select="$netstring"/>
	811	</xsl:otherwise>
	812	</xsl:choose>
	813	</xsl:template>
	814
[7072e1f]	815	<xsl:template name="outputpkgdest">
	816	<xsl:param name="outputstring" select="foo"/>
	817	<xsl:choose>
	818	<xsl:when test="contains($outputstring,'make ')">
	819	<xsl:choose>
	820	<xsl:when test="not(starts-with($outputstring,'make'))">
	821	<xsl:call-template name="outputpkgdest">
	822	<xsl:with-param name="outputstring"
	823	select="substring-before($outputstring,'make')"/>
	824	</xsl:call-template>
	825	<xsl:call-template name="outputpkgdest">
	826	<xsl:with-param
	827	name="outputstring"
	828	select="substring-after($outputstring,
	829	substring-before($outputstring,'make'))"/>
	830	</xsl:call-template>
	831	</xsl:when>
	832	<xsl:otherwise>
	833	<xsl:choose>
	834	<!-- special cases (no DESTDIR) here -->
	835	<xsl:when test="ancestor::sect1[@id='ch-system-glibc']">
	836	<xsl:text>make install_root=$PKG_DEST -j1</xsl:text>
	837	<xsl:value-of
	838	select="substring-before(substring-after(string(),'make'),
	839	'install')"/>
	840	<xsl:text>install </xsl:text>
	841	</xsl:when>
	842	<xsl:when test="ancestor::sect1[@id='ch-system-bzip2']">
	843	<xsl:text>make PREFIX=$PKG_DEST/usr install </xsl:text>
	844	</xsl:when>
	845	<xsl:when test="ancestor::sect1[@id='ch-system-sysklogd']">
	846	<xsl:text>make BINDIR=$PKG_DEST/sbin prefix=$PKG_DEST install </xsl:text>
	847	</xsl:when>
	848	<xsl:when test="ancestor::sect1[@id='ch-system-iproute2']">
[b1f4a8d]	849	<xsl:text>make DESTDIR=$PKG_DEST DOCDIR=</xsl:text>
[7072e1f]	850	<xsl:value-of
[b1f4a8d]	851	select="substring-before(substring-after(string(),'DOCDIR='),
[7072e1f]	852	'install')"/>
	853	<xsl:text>install </xsl:text>
	854	</xsl:when>
	855	<xsl:when test="ancestor::sect1[@id='ch-system-sysvinit']">
	856	<xsl:text>make ROOT=$PKG_DEST</xsl:text>
	857	<xsl:value-of
	858	select="substring-before(substring-after(string(),'make'),
	859	'install')"/>
	860	<xsl:text>install </xsl:text>
	861	</xsl:when>
	862	<xsl:when test="ancestor::sect1[@id='ch-bootable-kernel']">
	863	<xsl:text>make INSTALL_MOD_PATH=$PKG_DEST</xsl:text>
	864	<xsl:value-of
	865	select="substring-before(substring-after(string(),'make'),
	866	'install')"/>
	867	<xsl:text>install </xsl:text>
	868	</xsl:when>
[560bef1]	869	<xsl:when test="ancestor::sect1[@id='ch-system-attr']">
	870	<xsl:text>DIST_ROOT=$PKG_DEST make</xsl:text>
	871	<xsl:call-template name="outputpkgdest">
	872	<xsl:with-param name="outputstring"
	873	select="substring-after($outputstring,'make')"/>
	874	</xsl:call-template>
	875	</xsl:when>
[7072e1f]	876	<xsl:otherwise>
[560bef1]	877	<xsl:text>make DESTDIR=$PKG_DEST</xsl:text>
[e6e0c85]	878	<xsl:call-template name="outputpkgdest">
[560bef1]	879	<xsl:with-param
[7072e1f]	880	name="outputstring"
	881	select="substring-after($outputstring,'make')"/>
[560bef1]	882	</xsl:call-template>
[7072e1f]	883	</xsl:otherwise>
	884	</xsl:choose>
	885	</xsl:otherwise>
	886	</xsl:choose>
	887	</xsl:when>
	888	<xsl:otherwise> <!-- no make in this string -->
	889	<xsl:choose>
	890	<xsl:when test="contains($outputstring,'>/') and
	891	not(contains(substring-before($outputstring,'>/'),' /'))">
	892	<xsl:value-of select="substring-before($outputstring,'>/')"/>
	893	<xsl:text>>$PKG_DEST/</xsl:text>
	894	<xsl:call-template name="outputpkgdest">
	895	<xsl:with-param name="outputstring" select="substring-after($outputstring,'>/')"/>
	896	</xsl:call-template>
	897	</xsl:when>
	898	<xsl:when test="contains($outputstring,' /')">
	899	<xsl:value-of select="substring-before($outputstring,' /')"/>
	900	<xsl:text> $PKG_DEST/</xsl:text>
	901	<xsl:call-template name="outputpkgdest">
	902	<xsl:with-param name="outputstring" select="substring-after($outputstring,' /')"/>
	903	</xsl:call-template>
	904	</xsl:when>
	905	<xsl:otherwise>
	906	<xsl:value-of select="$outputstring"/>
	907	<xsl:text> </xsl:text>
	908	</xsl:otherwise>
	909	</xsl:choose>
	910	</xsl:otherwise>
	911	</xsl:choose>
	912	</xsl:template>
[df42c7c]	913
	914	<xsl:variable name="APOS">'</xsl:variable>
	915	<xsl:template name="output-wrap">
	916	<xsl:param name="commands" select="''"/>
	917	<xsl:choose>
	918	<xsl:when test="contains($commands,string($APOS))">
	919	<xsl:call-template name="output-wrap">
	920	<xsl:with-param name="commands"
	921	select="substring-before($commands,string($APOS))"/>
	922	</xsl:call-template>
	923	<xsl:text>'\''</xsl:text>
	924	<xsl:call-template name="output-wrap">
	925	<xsl:with-param name="commands"
	926	select="substring-after($commands,string($APOS))"/>
	927	</xsl:call-template>
	928	</xsl:when>
	929	<xsl:otherwise>
	930	<xsl:value-of select="$commands"/>
	931	</xsl:otherwise>
	932	</xsl:choose>
	933	</xsl:template>
	934
[557fe91]	935	</xsl:stylesheet>

Note: See TracBrowser for help on using the repository browser.

Download in other formats: