Context Navigation

source: LFS/lfs.xsl@ 580d773

new_features

Last change on this file since 580d773 was 580d773, checked in by Pierre Labastie <pierre@…>, 8 years ago
Merge trunk r3940,41
Property mode set to `100644`
File size: 38.6 KB

Rev	Line
[7072e1f]	1	<?xml version="1.0" encoding="ISO-8859-1"?>
[db181c47]	2
[877cc6a]	3	<!-- $Id$ -->
	4
[7072e1f]	5	<xsl:stylesheet
	6	xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
	7	xmlns:exsl="http://exslt.org/common"
	8	extension-element-prefixes="exsl"
	9	version="1.0">
[557fe91]	10
[77fa8ba]	11	<!-- Parameters -->
	12
[580d773]	13	<!-- which revision attribute to include: can only be sysv or systemd,
	14	but we leave checking to the caller-->
	15	<xsl:param name="revision" select="'sysv'"/>
	16
[7072e1f]	17	<!-- use package management ?
	18	n = no, original behavior
	19	y = yes, add PKG_DEST to scripts in install commands of chapter06-08
	20	-->
[df42c7c]	21	<xsl:param name="pkgmngt" select="'n'"/>
	22
	23	<!-- Package management with "porg style" ?
	24	n = no, same as pkgmngt description above
	25	y = yes, wrap install commands of chapter06-08 into a bash function.
	26	note that pkgmngt must be 'y' in this case
	27	-->
	28	<xsl:param name="wrap-install" select='"n"'/>
[7072e1f]	29
[31d6944]	30	<!-- Run test suites?
	31	0 = none
[77fa8ba]	32	1 = only chapter06 critical testsuites
[31d6944]	33	2 = all chapter06 testsuites
[28f4756]	34	3 = all chapter05 and chapter06 testsuites
	35	-->
[31d6944]	36	<xsl:param name="testsuite" select="1"/>
[01e51a1]	37
[28f4756]	38	<!-- Bomb on test suites failures?
[401f81e]	39	n = no, I want to build the full system and review the logs
	40	y = yes, bomb at the first test suite failure to can review the build dir
[28f4756]	41	-->
[df42c7c]	42	<xsl:param name="bomb-testsuite" select="'n'"/>
[28f4756]	43
[7072e1f]	44	<!-- Install vim-lang package? OBSOLETE should always be 'n'-->
[df42c7c]	45	<xsl:param name="vim-lang" select="'n'"/>
[7072e1f]	46
[877cc6a]	47	<!-- Time zone -->
[df42c7c]	48	<xsl:param name="timezone" select="'GMT'"/>
[7072e1f]	49
[877cc6a]	50	<!-- Page size -->
[df42c7c]	51	<xsl:param name="page" select="'letter'"/>
[7072e1f]	52
[877cc6a]	53	<!-- Locale settings -->
[df42c7c]	54	<xsl:param name="lang" select="'C'"/>
[b339c94]	55
	56	<!-- Install the whole set of locales -->
[df42c7c]	57	<xsl:param name='full-locale' select='"n"'/>
[7072e1f]	58
[77fa8ba]	59	<!-- Hostname -->
	60	<xsl:param name='hostname' select='"HOSTNAME"'/>
	61
	62	<!-- Network parameters: interface, ip, gateway, prefix, broadcast, domain
	63	and nameservers -->
[df42c7c]	64	<xsl:param name='interface' select="'eth0'"/>
[77fa8ba]	65	<xsl:param name='ip' select='"10.0.2.9"'/>
	66	<xsl:param name='gateway' select='"10.0.2.2"'/>
	67	<xsl:param name='prefix' select='24'/>
	68	<xsl:param name='broadcast' select='"10.0.2.255"'/>
	69	<xsl:param name='domain' select='"lfs.org"'/>
	70	<xsl:param name='nameserver1' select='"10.0.2.3"'/>
	71	<xsl:param name='nameserver2' select='"8.8.8.8"'/>
	72
	73	<!-- End parameters -->
	74
[557fe91]	75	<xsl:template match="/">
[580d773]	76	<xsl:apply-templates select="//sect1[not(@revision) or
	77	@revision=$revision]"/>
[557fe91]	78	</xsl:template>
[7072e1f]	79
[557fe91]	80	<xsl:template match="sect1">
[580d773]	81	<!-- Since this xsl:if tag encloses the whole template, it would
	82	be much better to transpose this condition to the select part
	83	of the "calling" apply-template. But that would change the numbering,
	84	so that it would be difficult to compare to previous versions. So for
	85	version 2.4, let us keep this -->
[7072e1f]	86	<xsl:if test="(../@id='chapter-temporary-tools' or
[14eaa9f]	87	../@id='chapter-building-system' or
	88	../@id='chapter-bootscripts' or
	89	../@id='chapter-bootable') and
[580d773]	90	(sect2[not(@revision) or @revision=$revision]//..\|.)/
	91	screen[(not(@role) or @role != 'nodump') and
	92	(not(@revision) or @revision=$revision)]/
	93	userinput[not(starts-with(string(),'chroot'))]">
[d68eb1b]	94	<!-- The last condition is a hack to allow previous versions of the
	95	book where the chroot commands did not have role="nodump".
	96	It only works if the chroot command is the only one on the page -->
[c4cf6de]	97	<!-- The dirs names -->
	98	<xsl:variable name="pi-dir" select="../processing-instruction('dbhtml')"/>
	99	<xsl:variable name="pi-dir-value" select="substring-after($pi-dir,'dir=')"/>
	100	<xsl:variable name="quote-dir" select="substring($pi-dir-value,1,1)"/>
	101	<xsl:variable name="dirname" select="substring-before(substring($pi-dir-value,2),$quote-dir)"/>
[7072e1f]	102	<!-- The file names -->
	103	<xsl:variable name="pi-file" select="processing-instruction('dbhtml')"/>
	104	<xsl:variable name="pi-file-value" select="substring-after($pi-file,'filename=')"/>
	105	<xsl:variable name="filename" select="substring-before(substring($pi-file-value,2),'.html')"/>
	106	<!-- The build order -->
	107	<xsl:variable name="position" select="position()"/>
	108	<xsl:variable name="order">
	109	<xsl:choose>
	110	<xsl:when test="string-length($position) = 1">
	111	<xsl:text>00</xsl:text>
	112	<xsl:value-of select="$position"/>
	113	</xsl:when>
	114	<xsl:when test="string-length($position) = 2">
	115	<xsl:text>0</xsl:text>
	116	<xsl:value-of select="$position"/>
	117	</xsl:when>
	118	<xsl:otherwise>
	119	<xsl:value-of select="$position"/>
	120	</xsl:otherwise>
	121	</xsl:choose>
	122	</xsl:variable>
	123	<!-- Inclusion of package manager scriptlets -->
	124	<xsl:if test="@id='ch-tools-stripping' and $pkgmngt='y'">
	125	<xsl:apply-templates
[575bcf3]	126	select="document('packageManager.xml')//sect1[contains(@id,'ch-tools')]"
[7072e1f]	127	mode="pkgmngt">
[575bcf3]	128	<xsl:with-param name="order" select="$order"/>
[7072e1f]	129	<xsl:with-param name="dirname" select="$dirname"/>
	130	</xsl:apply-templates>
	131	</xsl:if>
	132	<xsl:if test="@id='ch-system-strippingagain' and $pkgmngt='y'">
	133	<xsl:apply-templates
[575bcf3]	134	select="document('packageManager.xml')//sect1[contains(@id,'ch-system')]"
[7072e1f]	135	mode="pkgmngt">
[575bcf3]	136	<xsl:with-param name="order" select="$order"/>
[7072e1f]	137	<xsl:with-param name="dirname" select="$dirname"/>
	138	</xsl:apply-templates>
	139	</xsl:if>
	140	<!-- Creating dirs and files -->
	141	<exsl:document href="{$dirname}/{$order}-{$filename}" method="text">
	142	<xsl:choose>
	143	<xsl:when test="@id='ch-system-creatingdirs' or
	144	@id='ch-system-createfiles' or
	145	@id='ch-system-strippingagain'">
	146	<xsl:text>#!/tools/bin/bash set +h </xsl:text>
	147	</xsl:when>
	148	<xsl:otherwise>
	149	<xsl:text>#!/bin/bash set +h </xsl:text>
	150	</xsl:otherwise>
	151	</xsl:choose>
	152	<xsl:if test="not(@id='ch-tools-stripping') and
	153	not(@id='ch-system-strippingagain')">
	154	<xsl:text>set -e </xsl:text>
	155	</xsl:if>
	156	<xsl:text> </xsl:text>
	157	<xsl:if test="sect2[@role='installation']">
	158	<xsl:text>cd $PKGDIR </xsl:text>
	159	</xsl:if>
[580d773]	160	<xsl:apply-templates select="sect2[not(@revision) or
	161	@revision=$revision] \|
	162	screen[(not(@role) or
	163	@role!='nodump') and
	164	(not(@revision) or
	165	@revision=$revision)]/userinput"/>
[e6e0c85]	166	<xsl:if test="@id='ch-system-creatingdirs' and $pkgmngt='y'">
[f0a31de]	167	<xsl:apply-templates
	168	select="document('packageManager.xml')//sect1[
	169	@id='ch-pkgmngt-creatingdirs'
[e6e0c85]	170	]//userinput"
	171	mode="pkgmngt"/>
[f0a31de]	172	</xsl:if>
[e6e0c85]	173	<xsl:if test="@id='ch-system-createfiles' and $pkgmngt='y'">
[f0a31de]	174	<xsl:apply-templates
	175	select="document('packageManager.xml')//sect1[
	176	@id='ch-pkgmngt-createfiles'
[e6e0c85]	177	]//userinput"
	178	mode="pkgmngt"/>
[f0a31de]	179	</xsl:if>
[d68eb1b]	180	<xsl:text>echo -e "\n\nTotalseconds: $SECONDS\n" </xsl:text>
[f0a31de]	181	<xsl:text>exit </xsl:text>
	182	</exsl:document>
	183	</xsl:if>
	184	</xsl:template>
	185
	186	<xsl:template match="sect2">
	187	<xsl:apply-templates
[580d773]	188	select=".//screen[(not(@role) or
	189	@role != 'nodump') and
	190	(not(@revision) or
	191	@revision=$revision)]/userinput[
[f0a31de]	192	@remap = 'pre' or
	193	@remap = 'configure' or
	194	@remap = 'make' or
	195	@remap = 'test' and
[f2e80ac]	196	not(current()/../@id='ch-tools-dejagnu') and
	197	not(current()/../@id='ch-system-systemd')]"/>
[f0a31de]	198	<xsl:if
	199	test="ancestor::chapter[@id != 'chapter-temporary-tools'] and
	200	$pkgmngt = 'y' and
	201	descendant::screen[not(@role) or
	202	@role != 'nodump']/userinput[
	203	@remap='install']">
[df42c7c]	204	<xsl:choose>
	205	<xsl:when test="$wrap-install='y'">
	206	<xsl:text>wrapInstall '
	207	</xsl:text>
	208	</xsl:when>
	209	<xsl:otherwise>
	210	<xsl:text>mkdir -pv $PKG_DEST/{boot,etc,lib,bin,sbin}
[7072e1f]	211	mkdir -pv $PKG_DEST/usr/{lib,bin,sbin,include}
	212	mkdir -pv $PKG_DEST/usr/share/{doc,info,man}
	213	mkdir -pv $PKG_DEST/usr/share/man/man{1..8}
	214	ln -sv share/{man,doc,info} $PKG_DEST/usr
	215	case $(uname -m) in
	216	x86_64) ln -sv lib $PKG_DEST/lib64 && ln -sv lib $PKG_DEST/usr/lib64 ;;
	217	esac
	218	</xsl:text>
[df42c7c]	219	</xsl:otherwise>
	220	</xsl:choose>
[f0a31de]	221	</xsl:if>
	222	<xsl:if test="../@id = 'ch-system-glibc' and
[90f304c]	223	@role='installation' and
[df42c7c]	224	$pkgmngt = 'y' and
	225	$wrap-install = 'n'">
[f0a31de]	226	<xsl:text>mkdir -pv $PKG_DEST/usr/include/{rpc,rpcsvc}
[7072e1f]	227	</xsl:text>
[f0a31de]	228	</xsl:if>
	229	<xsl:apply-templates
[580d773]	230	select=".//screen[(not(@role) or
	231	@role != 'nodump') and
	232	(not(@revision) or
	233	@revision=$revision)]/userinput[@remap = 'install']"/>
[f0a31de]	234	<xsl:if test="ancestor::chapter[@id != 'chapter-temporary-tools'] and
	235	$pkgmngt = 'y' and
	236	descendant::screen[not(@role) or
	237	@role != 'nodump']/userinput[
	238	@remap='install']">
[df42c7c]	239	<xsl:choose>
	240	<xsl:when test="$wrap-install='y'">
	241	<xsl:if test="../@id = 'ch-system-man-pages'">
[560bef1]	242	<!-- these files are provided by the shadow package -->
[df42c7c]	243	<xsl:text>rm -fv /usr/share/man/{man3/getspnam.3,man5/passwd.5}
[560bef1]	244	</xsl:text>
[df42c7c]	245	</xsl:if>
[560bef1]	246	<!-- Attr man/man2 pages are already installed by man-pages. As of
[00313dd]	247	March 2013, they are the same pages.
	248	November 2015: now they are more accurate
	249	in man-pages, and the man5 section is also in man-pages... -->
[df42c7c]	250	<xsl:if test="../@id = 'ch-system-attr'">
	251	<xsl:text>rm -fv /usr/share/man/man2/*
	252	rm -fv /usr/share/man/man5/*
	253	</xsl:text>
	254	</xsl:if>
	255	<!-- nologin is installed by util-linux. remove it from shadow -->
	256	<xsl:if test="../@id = 'ch-system-shadow'">
	257	<xsl:text>rm -fv /usr/share/man/man8/nologin.8
	258	rm -fv /sbin/nologin
	259	</xsl:text>
	260	</xsl:if>
	261	<xsl:text>'
	262	packInstall
	263	</xsl:text>
	264	</xsl:when>
	265	<xsl:otherwise>
	266	<xsl:if test="../@id = 'ch-system-man-pages'">
	267	<!-- these files are provided by the shadow package -->
	268	<xsl:text>rm -fv $PKG_DEST/usr/share/man/{man3/getspnam.3,man5/passwd.5}
	269	</xsl:text>
	270	</xsl:if>
	271	<!-- Attr man/man2 pages are already installed by man-pages. As of
	272	March 2013, they are the same pages.
	273	November 2015: now they are more accurate
	274	in man-pages, and the man5 section is also in man-pages... -->
	275	<xsl:if test="../@id = 'ch-system-attr'">
	276	<xsl:text>rm -fv $PKG_DEST/usr/share/man/man2/*
[00313dd]	277	rm -fv $PKG_DEST/usr/share/man/man5/*
[a983256]	278	</xsl:text>
[df42c7c]	279	</xsl:if>
[a983256]	280	<!-- nologin is installed by util-linux. remove it from shadow -->
[df42c7c]	281	<xsl:if test="../@id = 'ch-system-shadow'">
	282	<xsl:text>rm -fv $PKG_DEST/usr/share/man/man8/nologin.8
[a983256]	283	rm -fv $PKG_DEST/sbin/nologin
[7072e1f]	284	</xsl:text>
[df42c7c]	285	</xsl:if>
	286	<xsl:text>rm -fv $PKG_DEST/{,usr/}lib64
[7072e1f]	287	rm -fv $PKG_DEST/usr/{man,doc,info}
	288	for dir in $PKG_DEST/usr/share/man/man{1..8}; do
	289	[[ -z $(ls $dir) ]] && rmdir -v $dir
	290	done
	291	for dir in $PKG_DEST/usr/share/{doc,info,man}; do
	292	[[ -z $(ls $dir) ]] && rmdir -v $dir
	293	done
	294	for dir in $PKG_DEST/usr/{lib,bin,sbin,include}; do
	295	[[ -z $(ls $dir) ]] && rmdir -v $dir
	296	done
	297	for dir in $PKG_DEST/{boot,etc,lib,bin,sbin}; do
	298	[[ -z $(ls $dir) ]] && rmdir -v $dir
	299	done
	300	packInstall
	301	rm -rf $PKG_DEST
	302	</xsl:text>
[df42c7c]	303	</xsl:otherwise>
	304	</xsl:choose>
[f0a31de]	305	</xsl:if>
	306	<xsl:if test="$testsuite='3' and
	307	../@id='ch-tools-glibc' and
	308	@role='installation'">
	309	<xsl:copy-of select="//userinput[@remap='locale-test']"/>
	310	<xsl:text> </xsl:text>
	311	</xsl:if>
	312	<xsl:if test="../@id='ch-system-glibc' and @role='installation'">
	313	<xsl:choose>
	314	<xsl:when test="$full-locale='y'">
	315	<xsl:copy-of select="//userinput[@remap='locale-full']"/>
	316	<xsl:text> </xsl:text>
	317	</xsl:when>
	318	<xsl:otherwise>
	319	<xsl:copy-of select="//userinput[@remap='locale-test']"/>
	320	<xsl:text> </xsl:text>
	321	<xsl:if test="not(contains(string(//userinput[@remap='locale-test']),$lang)) and $lang!='C' and $lang!='POSIX'">
	322	<xsl:text>if LOCALE=`grep "</xsl:text>
	323	<xsl:value-of select="$lang"/>
	324	<xsl:text>/" $PKGDIR/localedata/SUPPORTED`; then
[b339c94]	325	CHARMAP=`echo $LOCALE \| sed 's,[^/]/\([^ ]\) [\],\1,'`
	326	INPUT=`echo $LOCALE \| sed 's,[/.].*,,'`
	327	LOCALE=`echo $LOCALE \| sed 's,/.*,,'`
	328	localedef -i $INPUT -f $CHARMAP $LOCALE
	329	fi
	330	</xsl:text>
[f0a31de]	331	</xsl:if>
	332	</xsl:otherwise>
	333	</xsl:choose>
[c4cf6de]	334	</xsl:if>
[f0a31de]	335	<xsl:apply-templates
	336	select=".//screen[
[580d773]	337	(not(@role) or
	338	@role != 'nodump') and
	339	(not(@revision) or
	340	@revision=$revision)
[f0a31de]	341	]/userinput[
[f2e80ac]	342	not(@remap) or
	343	@remap='adjust' or
	344	@remap='test' and current()/../@id='ch-tools-dejagnu' or
	345	@remap='test' and current()/../@id='ch-system-systemd'
[f0a31de]	346	]"/>
[557fe91]	347	</xsl:template>
	348
[f0a31de]	349	<xsl:template match="sect1" mode="pkgmngt">
[7072e1f]	350	<xsl:param name="dirname" select="chapter05"/>
	351	<!-- The build order -->
[575bcf3]	352	<xsl:param name="order" select="062"/>
[7072e1f]	353	<!-- The file names -->
	354	<xsl:variable name="pi-file" select="processing-instruction('dbhtml')"/>
	355	<xsl:variable name="pi-file-value" select="substring-after($pi-file,'filename=')"/>
	356	<xsl:variable name="filename" select="substring-before(substring($pi-file-value,2),'.html')"/>
	357	<!-- Creating dirs and files -->
[8099885]	358	<xsl:if test="count(descendant::screen/userinput) > 0 and
	359	count(descendant::screen/userinput) >
	360	count(descendant::screen[@role='nodump'])">
	361	<exsl:document href="{$dirname}/{$order}-{position()}-{$filename}"
	362	method="text">
	363	<xsl:text>#!/bin/bash
[7072e1f]	364	set +h
	365	set -e
	366
	367	cd $PKGDIR
	368	</xsl:text>
[8099885]	369	<xsl:apply-templates
	370	select=".//screen[not(@role) or
	371	@role != 'nodump']/userinput[@remap != 'adjust']"
[7072e1f]	372	mode="pkgmngt"/>
[8099885]	373	<xsl:if test="$dirname = 'chapter06'">
	374	<xsl:text>packInstall
[df42c7c]	375	rm -rf "$PKG_DEST"
[7072e1f]	376	</xsl:text>
[8099885]	377	</xsl:if>
	378	<xsl:apply-templates
	379	select=".//screen[not(@role) or
	380	@role != 'nodump'
	381	]/userinput[not(@remap) or
	382	@remap='adjust'
[7072e1f]	383	]"
	384	mode="pkgmngt"/>
[8099885]	385	<xsl:text>
[7072e1f]	386	echo -e "\n\nTotalseconds: $SECONDS\n"
	387	exit
	388	</xsl:text>
[8099885]	389	</exsl:document>
	390	</xsl:if>
[557fe91]	391	</xsl:template>
	392
[7072e1f]	393	<xsl:template match="userinput" mode="pkgmngt">
	394	<xsl:apply-templates/>
	395	<xsl:text> </xsl:text>
	396	</xsl:template>
	397
	398	<xsl:template match="userinput">
[3eb60fa]	399	<xsl:choose>
[fd691b4]	400	<!-- Copying the kernel config file -->
	401	<xsl:when test="string() = 'make mrproper'">
	402	<xsl:text>make mrproper </xsl:text>
[7072e1f]	403	<xsl:if test="ancestor::sect1[@id='ch-bootable-kernel']">
[bcfb3bf]	404	<xsl:text>cp -v ../kernel-config .config </xsl:text>
	405	</xsl:if>
[92568bf]	406	</xsl:when>
[7072e1f]	407	<!-- test instructions -->
	408	<xsl:when test="@remap = 'test'">
[4afcedb]	409	<xsl:choose>
	410	<xsl:when test="$testsuite = '0'"/>
	411	<xsl:when test="$testsuite = '1' and
	412	not(ancestor::sect1[@id='ch-system-gcc']) and
	413	not(ancestor::sect1[@id='ch-system-glibc']) and
[7072e1f]	414	not(ancestor::sect1[@id='ch-system-gmp']) and
	415	not(ancestor::sect1[@id='ch-system-mpfr']) and
[4afcedb]	416	not(ancestor::sect1[@id='ch-system-binutils'])"/>
	417	<xsl:when test="$testsuite = '2' and
	418	ancestor::chapter[@id='chapter-temporary-tools']"/>
	419	<xsl:otherwise>
	420	<xsl:choose>
	421	<xsl:when test="$bomb-testsuite = 'n'">
[7072e1f]	422	<xsl:choose>
	423	<!-- special case for glibc -->
	424	<xsl:when test="contains(string(), 'glibc-check-log')">
	425	<xsl:value-of
	426	select="substring-before(string(),'2>&1')"/>
	427	<xsl:text>>> $TEST_LOG 2>&1 \|\| true </xsl:text>
	428	</xsl:when>
[e40a68e]	429	<!-- special case for procps-ng -->
	430	<xsl:when test="contains(string(), 'pushd')">
	431	<xsl:text>{ </xsl:text>
	432	<xsl:apply-templates/>
	433	<xsl:text>; } >> $TEST_LOG 2>&1 \|\| true </xsl:text>
	434	</xsl:when>
[7072e1f]	435	<xsl:when test="contains(string(), 'make -k')">
	436	<xsl:apply-templates/>
	437	<xsl:text> >> $TEST_LOG 2>&1 \|\| true </xsl:text>
	438	</xsl:when>
	439	<xsl:when test="contains(string(), 'make')">
	440	<xsl:value-of select="substring-before(string(),'make')"/>
	441	<xsl:text>make -k</xsl:text>
	442	<xsl:value-of select="substring-after(string(),'make')"/>
	443	<xsl:text> >> $TEST_LOG 2>&1 \|\| true </xsl:text>
	444	</xsl:when>
	445	<xsl:otherwise>
	446	<xsl:apply-templates/>
	447	<xsl:if test="not(contains(string(), '>>'))">
	448	<xsl:text> >> $TEST_LOG 2>&1</xsl:text>
	449	</xsl:if>
	450	<xsl:text> </xsl:text>
	451	</xsl:otherwise>
	452	</xsl:choose>
[4afcedb]	453	</xsl:when>
	454	<xsl:otherwise>
[7072e1f]	455	<!-- bomb-testsuite != 'n'-->
	456	<xsl:choose>
	457	<!-- special case for glibc -->
	458	<xsl:when test="contains(string(), 'glibc-check-log')">
	459	<xsl:value-of
	460	select="substring-before(string(),'2>&1')"/>
[2c9a16b]	461	<xsl:text>>> $TEST_LOG 2>&1 \|\| true </xsl:text>
[7072e1f]	462	</xsl:when>
[e40a68e]	463	<!-- special case for gmp -->
[f663589]	464	<xsl:when test="contains(string(), 'tee gmp-check-log')">
	465	<xsl:text>(</xsl:text>
	466	<xsl:apply-templates/>
	467	<xsl:text>>> $TEST_LOG 2>&1 && exit $PIPESTATUS) </xsl:text>
	468	</xsl:when>
[e40a68e]	469	<!-- special case for procps-ng -->
	470	<xsl:when test="contains(string(), 'pushd')">
	471	<xsl:text>{ </xsl:text>
	472	<xsl:apply-templates/>
	473	<xsl:text>; } >> $TEST_LOG 2>&1 </xsl:text>
	474	</xsl:when>
[2c9a16b]	475	<xsl:when test="contains(string(), 'make -k')">
	476	<xsl:apply-templates/>
	477	<xsl:text> >> $TEST_LOG 2>&1 \|\| true </xsl:text>
	478	</xsl:when>
[7072e1f]	479	<xsl:otherwise>
	480	<xsl:apply-templates/>
	481	<xsl:if test="not(contains(string(), '>>'))">
	482	<xsl:text> >> $TEST_LOG 2>&1</xsl:text>
	483	</xsl:if>
	484	<xsl:text> </xsl:text>
	485	</xsl:otherwise>
	486	</xsl:choose>
[4afcedb]	487	</xsl:otherwise>
	488	</xsl:choose>
	489	</xsl:otherwise>
	490	</xsl:choose>
	491	</xsl:when>
[7072e1f]	492	<!-- End of test instructions -->
[fd691b4]	493	<!-- Don't stop on strip run -->
	494	<xsl:when test="contains(string(),'strip ')">
[3eb60fa]	495	<xsl:apply-templates/>
[fd691b4]	496	<xsl:text> \|\| true </xsl:text>
[1f025ca]	497	</xsl:when>
[7072e1f]	498	<!-- Package management -->
	499	<!-- Add $PKG_DEST to installation commands -->
	500	<xsl:when test="@remap='install' and
	501	not(ancestor::chapter[
	502	@id='chapter-temporary-tools'
	503	])">
	504	<xsl:choose>
	505	<xsl:when test="$pkgmngt='n'">
	506	<xsl:choose>
	507	<xsl:when test="contains(string(),'firmware,udev')">
	508	<xsl:text>if [[ ! -d /lib/udev/devices ]] ; then </xsl:text>
	509	<xsl:apply-templates/>
	510	<xsl:text> fi </xsl:text>
	511	</xsl:when>
	512	<xsl:otherwise>
	513	<xsl:apply-templates/>
	514	<xsl:text> </xsl:text>
	515	</xsl:otherwise>
	516	</xsl:choose>
	517	</xsl:when>
[df42c7c]	518	<xsl:when test="$wrap-install='y'">
	519	<xsl:choose>
	520	<xsl:when test="./literal">
	521	<xsl:call-template name="output-wrap">
	522	<xsl:with-param name="commands" select="text()[1]"/>
	523	</xsl:call-template>
	524	<xsl:apply-templates select="literal"/>
	525	<xsl:call-template name="output-wrap">
	526	<xsl:with-param name="commands" select="text()[2]"/>
	527	</xsl:call-template>
	528	</xsl:when>
	529	<xsl:otherwise>
	530	<xsl:call-template name="output-wrap">
	531	<xsl:with-param name="commands" select="string()"/>
	532	</xsl:call-template>
	533	</xsl:otherwise>
	534	</xsl:choose>
	535	<xsl:text> </xsl:text>
	536	</xsl:when>
	537	<xsl:otherwise><!--pkgmngt = 'y' and wrap-install='n'-->
[7072e1f]	538	<xsl:choose>
	539	<xsl:when test="./literal">
	540	<xsl:call-template name="outputpkgdest">
[560bef1]	541	<xsl:with-param name="outputstring" select="text()[1]"/>
[7072e1f]	542	</xsl:call-template>
	543	<xsl:apply-templates select="literal"/>
	544	<xsl:call-template name="outputpkgdest">
[560bef1]	545	<xsl:with-param name="outputstring" select="text()[2]"/>
[7072e1f]	546	</xsl:call-template>
	547	</xsl:when>
	548	<xsl:otherwise>
	549	<xsl:call-template name="outputpkgdest">
	550	<xsl:with-param name="outputstring" select="string()"/>
	551	</xsl:call-template>
	552	</xsl:otherwise>
	553	</xsl:choose>
	554	</xsl:otherwise>
	555	</xsl:choose>
	556	</xsl:when>
[57ef0c1]	557	<!-- if package management, we should make an independant package for
	558	tzdata. -->
	559	<xsl:when test="contains(string(),'tzdata') and $pkgmngt='y'">
	560	<xsl:text>
[df42c7c]	561	OLD_PKG_DEST="$PKG_DEST"
[57ef0c1]	562	OLD_PKGDIR=$PKGDIR
[56d8426]	563	PKG_DEST=$(dirname $OLD_PKG_DEST)/001-tzdata
[57ef0c1]	564	PKGDIR=$(dirname $PKGDIR)/tzdata-</xsl:text>
	565	<xsl:copy-of select="substring-before(
	566	substring-after(string(),'tzdata'),
	567	'.tar')"/>
	568	<xsl:text>
	569	</xsl:text>
[df42c7c]	570	<xsl:choose>
	571	<xsl:when test="$wrap-install='n'">
	572	<xsl:copy-of select="substring-before(string(),'ZONEINFO=')"/>
	573	<xsl:text>ZONEINFO=$PKG_DEST</xsl:text>
	574	<xsl:copy-of select="substring-after(string(),'ZONEINFO=')"/>
	575	<xsl:text>
[57ef0c1]	576	packInstall
	577	rm -rf $PKG_DEST
[df42c7c]	578	</xsl:text>
	579	</xsl:when>
	580	<xsl:otherwise><!-- wrap-install='y' -->
	581	<xsl:copy-of select="substring-before(string(),'ZONEINFO=')"/>
	582	<xsl:text>
	583	wrapInstall '
	584	ZONEINFO=</xsl:text>
	585	<xsl:copy-of select="substring-after(string(),'ZONEINFO=')"/>
	586	<xsl:text>'
	587	packInstall
	588	</xsl:text>
	589	</xsl:otherwise>
	590	</xsl:choose>
	591	<xsl:text>
[57ef0c1]	592	PKG_DEST=$OLD_PKG_DEST
	593	unset OLD_PKG_DEST
	594	PKGDIR=$OLD_PKGDIR
	595	unset OLD_PKGDIR
	596	</xsl:text>
	597	</xsl:when><!-- addition for tzdata + package management -->
[7072e1f]	598	<!-- End addition for package management -->
[fd691b4]	599	<!-- The rest of commands -->
[1f025ca]	600	<xsl:otherwise>
	601	<xsl:apply-templates/>
[fd691b4]	602	<xsl:text> </xsl:text>
[1f025ca]	603	</xsl:otherwise>
	604	</xsl:choose>
	605	</xsl:template>
[7072e1f]	606
[557fe91]	607	<xsl:template match="replaceable">
[a41ce58]	608	<xsl:choose>
[2a54650]	609	<xsl:when test="ancestor::sect1[@id='ch-system-glibc']">
[877cc6a]	610	<xsl:value-of select="$timezone"/>
[2a54650]	611	</xsl:when>
[a41ce58]	612	<xsl:when test="ancestor::sect1[@id='ch-system-groff']">
[877cc6a]	613	<xsl:value-of select="$page"/>
[a41ce58]	614	</xsl:when>
[81a7fb8]	615	<xsl:when test="contains(string(.),'<ll>_<CC>')">
	616	<xsl:value-of select="$lang"/>
	617	</xsl:when>
[77fa8ba]	618	<xsl:when test="contains(string(.),'Domain')">
	619	<xsl:value-of select="$domain"/>
	620	</xsl:when>
	621	<xsl:when test="contains(string(.),'primary')">
	622	<xsl:value-of select="$nameserver1"/>
	623	</xsl:when>
	624	<xsl:when test="contains(string(.),'secondary')">
	625	<xsl:value-of select="$nameserver2"/>
	626	</xsl:when>
	627	<xsl:when test="contains(string(.),'192.168.1.1')">
	628	<xsl:value-of select="$ip"/>
	629	</xsl:when>
[e43d0d0]	630	<xsl:when test="contains(string(.),'192.168.0.2')">
	631	<xsl:value-of select="$ip"/>
	632	</xsl:when>
	633	<!-- Only adapted to LFS-20170310 and later -->
[77fa8ba]	634	<xsl:when test="contains(string(.),'HOSTNAME')">
	635	<xsl:value-of select="$hostname"/>
	636	</xsl:when>
[e43d0d0]	637	<xsl:when test="contains(string(.),'FQDN')">
[77fa8ba]	638	<xsl:value-of select="$hostname"/>
[e43d0d0]	639	<xsl:text>.</xsl:text>
	640	<xsl:value-of select="$domain"/>
[77fa8ba]	641	</xsl:when>
[e43d0d0]	642	<xsl:when test="contains(string(.),'alias')"/>
[77fa8ba]	643	<xsl:when test="contains(string(.),'<lfs>')">
	644	<xsl:value-of select="$hostname"/>
	645	</xsl:when>
[a41ce58]	646	<xsl:otherwise>
	647	<xsl:text>**EDITME</xsl:text>
	648	<xsl:apply-templates/>
	649	<xsl:text>EDITME**</xsl:text>
	650	</xsl:otherwise>
	651	</xsl:choose>
[557fe91]	652	</xsl:template>
[7072e1f]	653
[77fa8ba]	654	<xsl:template match="literal">
	655	<xsl:choose>
	656	<xsl:when test="contains(string(),'ONBOOT')">
	657	<xsl:call-template name="outputnet">
	658	<xsl:with-param name="netstring" select="string()"/>
	659	</xsl:call-template>
	660	</xsl:when>
[d8ddcfb]	661	<xsl:when test="contains(string(),'[Match]')">
	662	<xsl:call-template name="outputsysdnet">
	663	<xsl:with-param name="netstring" select="string()"/>
	664	</xsl:call-template>
	665	</xsl:when>
[77fa8ba]	666	<xsl:otherwise>
	667	<xsl:apply-templates/>
	668	</xsl:otherwise>
	669	</xsl:choose>
	670	</xsl:template>
	671
	672	<xsl:template name="outputnet">
	673	<xsl:param name="netstring" select="''"/>
	674	<!-- We suppose that book example has the following values:
	675	- interface: eth0
[33ff403]	676	- ip: 192.168.1.2
	677	- gateway: 192.168.1.1
[77fa8ba]	678	- prefix: 24
	679	- broadcast: 192.168.1.255
	680	Change below if book changes -->
	681	<xsl:choose>
	682	<xsl:when test="contains($netstring,'eth0')">
	683	<xsl:call-template name="outputnet">
	684	<xsl:with-param name="netstring"
	685	select="substring-before($netstring,'eth0')"/>
	686	</xsl:call-template>
	687	<xsl:value-of select="$interface"/>
	688	<xsl:call-template name="outputnet">
	689	<xsl:with-param name="netstring"
	690	select="substring-after($netstring,'eth0')"/>
	691	</xsl:call-template>
	692	</xsl:when>
	693	<xsl:when test="contains($netstring,'192.168.1.1')">
	694	<xsl:call-template name="outputnet">
	695	<xsl:with-param name="netstring"
	696	select="substring-before($netstring,'192.168.1.1')"/>
	697	</xsl:call-template>
[33ff403]	698	<xsl:value-of select="$gateway"/>
[77fa8ba]	699	<xsl:call-template name="outputnet">
	700	<xsl:with-param name="netstring"
	701	select="substring-after($netstring,'192.168.1.1')"/>
	702	</xsl:call-template>
	703	</xsl:when>
	704	<!-- must test this before the following, because 192.168.1.255 contains
	705	192.168.1.2! -->
	706	<xsl:when test="contains($netstring,'192.168.1.255')">
	707	<xsl:call-template name="outputnet">
	708	<xsl:with-param name="netstring"
	709	select="substring-before($netstring,'192.168.1.255')"/>
	710	</xsl:call-template>
	711	<xsl:value-of select="$broadcast"/>
	712	<xsl:call-template name="outputnet">
	713	<xsl:with-param name="netstring"
	714	select="substring-after($netstring,'192.168.1.255')"/>
	715	</xsl:call-template>
	716	</xsl:when>
	717	<xsl:when test="contains($netstring,'192.168.1.2')">
	718	<xsl:call-template name="outputnet">
	719	<xsl:with-param name="netstring"
	720	select="substring-before($netstring,'192.168.1.2')"/>
	721	</xsl:call-template>
[33ff403]	722	<xsl:value-of select="$ip"/>
[77fa8ba]	723	<xsl:call-template name="outputnet">
	724	<xsl:with-param name="netstring"
	725	select="substring-after($netstring,'192.168.1.2')"/>
	726	</xsl:call-template>
	727	</xsl:when>
	728	<xsl:when test="contains($netstring,'24')">
	729	<xsl:call-template name="outputnet">
	730	<xsl:with-param name="netstring"
	731	select="substring-before($netstring,'24')"/>
	732	</xsl:call-template>
	733	<xsl:value-of select="$prefix"/>
	734	<xsl:call-template name="outputnet">
	735	<xsl:with-param name="netstring"
	736	select="substring-after($netstring,'24')"/>
	737	</xsl:call-template>
	738	</xsl:when>
	739	<xsl:otherwise>
	740	<xsl:value-of select="$netstring"/>
	741	</xsl:otherwise>
	742	</xsl:choose>
	743	</xsl:template>
	744
[d8ddcfb]	745	<xsl:template name="outputsysdnet">
	746	<xsl:param name="netstring" select="''"/>
	747	<!-- We suppose that book example has the following values:
	748	- interface: eth0
	749	- ip: 192.168.0.2
	750	- gateway: 192.168.0.1
	751	- prefix: 24
	752	- DNS: 192.168.0.1
	753	- Domain: <Your Domain Name>
	754	and gateway comes before DNS. Change below if book changes -->
	755	<xsl:choose>
	756	<xsl:when test="contains($netstring,'eth0')">
	757	<xsl:call-template name="outputsysdnet">
	758	<xsl:with-param name="netstring"
	759	select="substring-before($netstring,'eth0')"/>
	760	</xsl:call-template>
	761	<xsl:value-of select="$interface"/>
	762	<xsl:call-template name="outputsysdnet">
	763	<xsl:with-param name="netstring"
	764	select="substring-after($netstring,'eth0')"/>
	765	</xsl:call-template>
	766	</xsl:when>
	767	<xsl:when test="contains($netstring,'192.168.0.1') and
	768	contains($netstring,'Gateway')">
	769	<xsl:call-template name="outputsysdnet">
	770	<xsl:with-param name="netstring"
	771	select="substring-before($netstring,'192.168.0.1')"/>
	772	</xsl:call-template>
	773	<xsl:value-of select="$gateway"/>
	774	<xsl:call-template name="outputsysdnet">
	775	<xsl:with-param name="netstring"
	776	select="substring-after($netstring,'192.168.0.1')"/>
	777	</xsl:call-template>
	778	</xsl:when>
	779	<xsl:when test="contains($netstring,'192.168.0.1') and
	780	not(contains($netstring,'Gateway'))">
	781	<xsl:call-template name="outputsysdnet">
	782	<xsl:with-param name="netstring"
	783	select="substring-before($netstring,'192.168.0.1')"/>
	784	</xsl:call-template>
	785	<xsl:value-of select="$nameserver1"/>
	786	<xsl:text>
	787	DNS=</xsl:text>
	788	<xsl:value-of select="$nameserver2"/>
	789	<xsl:call-template name="outputsysdnet">
	790	<xsl:with-param name="netstring"
	791	select="substring-after($netstring,'192.168.0.1')"/>
	792	</xsl:call-template>
	793	</xsl:when>
	794	<xsl:when test="contains($netstring,'192.168.0.2')">
	795	<xsl:call-template name="outputsysdnet">
	796	<xsl:with-param name="netstring"
	797	select="substring-before($netstring,'192.168.0.2')"/>
	798	</xsl:call-template>
	799	<xsl:value-of select="$ip"/>
	800	<xsl:call-template name="outputsysdnet">
	801	<xsl:with-param name="netstring"
	802	select="substring-after($netstring,'192.168.0.2')"/>
	803	</xsl:call-template>
	804	</xsl:when>
	805	<xsl:when test="contains($netstring,'24')">
	806	<xsl:call-template name="outputsysdnet">
	807	<xsl:with-param name="netstring"
	808	select="substring-before($netstring,'24')"/>
	809	</xsl:call-template>
	810	<xsl:value-of select="$prefix"/>
	811	<xsl:call-template name="outputsysdnet">
	812	<xsl:with-param name="netstring"
	813	select="substring-after($netstring,'24')"/>
	814	</xsl:call-template>
	815	</xsl:when>
	816	<xsl:when test="contains($netstring,'<Your Domain Name>')">
	817	<xsl:call-template name="outputsysdnet">
	818	<xsl:with-param name="netstring"
	819	select="substring-before($netstring,'<Your Domain Name>')"/>
	820	</xsl:call-template>
	821	<xsl:value-of select="$domain"/>
	822	<xsl:call-template name="outputsysdnet">
	823	<xsl:with-param name="netstring"
	824	select="substring-after($netstring,'<Your Domain Name>')"/>
	825	</xsl:call-template>
	826	</xsl:when>
	827	<xsl:otherwise>
	828	<xsl:value-of select="$netstring"/>
	829	</xsl:otherwise>
	830	</xsl:choose>
	831	</xsl:template>
	832
[7072e1f]	833	<xsl:template name="outputpkgdest">
	834	<xsl:param name="outputstring" select="foo"/>
	835	<xsl:choose>
	836	<xsl:when test="contains($outputstring,'make ')">
	837	<xsl:choose>
	838	<xsl:when test="not(starts-with($outputstring,'make'))">
	839	<xsl:call-template name="outputpkgdest">
	840	<xsl:with-param name="outputstring"
	841	select="substring-before($outputstring,'make')"/>
	842	</xsl:call-template>
	843	<xsl:call-template name="outputpkgdest">
	844	<xsl:with-param
	845	name="outputstring"
	846	select="substring-after($outputstring,
	847	substring-before($outputstring,'make'))"/>
	848	</xsl:call-template>
	849	</xsl:when>
	850	<xsl:otherwise>
	851	<xsl:choose>
	852	<!-- special cases (no DESTDIR) here -->
	853	<xsl:when test="ancestor::sect1[@id='ch-system-glibc']">
	854	<xsl:text>make install_root=$PKG_DEST -j1</xsl:text>
	855	<xsl:value-of
	856	select="substring-before(substring-after(string(),'make'),
	857	'install')"/>
	858	<xsl:text>install </xsl:text>
	859	</xsl:when>
	860	<xsl:when test="ancestor::sect1[@id='ch-system-bzip2']">
	861	<xsl:text>make PREFIX=$PKG_DEST/usr install </xsl:text>
	862	</xsl:when>
	863	<xsl:when test="ancestor::sect1[@id='ch-system-sysklogd']">
	864	<xsl:text>make BINDIR=$PKG_DEST/sbin prefix=$PKG_DEST install </xsl:text>
	865	</xsl:when>
	866	<xsl:when test="ancestor::sect1[@id='ch-system-iproute2']">
[b1f4a8d]	867	<xsl:text>make DESTDIR=$PKG_DEST DOCDIR=</xsl:text>
[7072e1f]	868	<xsl:value-of
[b1f4a8d]	869	select="substring-before(substring-after(string(),'DOCDIR='),
[7072e1f]	870	'install')"/>
	871	<xsl:text>install </xsl:text>
	872	</xsl:when>
	873	<xsl:when test="ancestor::sect1[@id='ch-system-sysvinit']">
	874	<xsl:text>make ROOT=$PKG_DEST</xsl:text>
	875	<xsl:value-of
	876	select="substring-before(substring-after(string(),'make'),
	877	'install')"/>
	878	<xsl:text>install </xsl:text>
	879	</xsl:when>
	880	<xsl:when test="ancestor::sect1[@id='ch-bootable-kernel']">
	881	<xsl:text>make INSTALL_MOD_PATH=$PKG_DEST</xsl:text>
	882	<xsl:value-of
	883	select="substring-before(substring-after(string(),'make'),
	884	'install')"/>
	885	<xsl:text>install </xsl:text>
	886	</xsl:when>
[560bef1]	887	<xsl:when test="ancestor::sect1[@id='ch-system-attr']">
	888	<xsl:text>DIST_ROOT=$PKG_DEST make</xsl:text>
	889	<xsl:call-template name="outputpkgdest">
	890	<xsl:with-param name="outputstring"
	891	select="substring-after($outputstring,'make')"/>
	892	</xsl:call-template>
	893	</xsl:when>
[7072e1f]	894	<xsl:otherwise>
[560bef1]	895	<xsl:text>make DESTDIR=$PKG_DEST</xsl:text>
[e6e0c85]	896	<xsl:call-template name="outputpkgdest">
[560bef1]	897	<xsl:with-param
[7072e1f]	898	name="outputstring"
	899	select="substring-after($outputstring,'make')"/>
[560bef1]	900	</xsl:call-template>
[7072e1f]	901	</xsl:otherwise>
	902	</xsl:choose>
	903	</xsl:otherwise>
	904	</xsl:choose>
	905	</xsl:when>
	906	<xsl:otherwise> <!-- no make in this string -->
	907	<xsl:choose>
	908	<xsl:when test="contains($outputstring,'>/') and
	909	not(contains(substring-before($outputstring,'>/'),' /'))">
	910	<xsl:value-of select="substring-before($outputstring,'>/')"/>
	911	<xsl:text>>$PKG_DEST/</xsl:text>
	912	<xsl:call-template name="outputpkgdest">
	913	<xsl:with-param name="outputstring" select="substring-after($outputstring,'>/')"/>
	914	</xsl:call-template>
	915	</xsl:when>
	916	<xsl:when test="contains($outputstring,' /')">
	917	<xsl:value-of select="substring-before($outputstring,' /')"/>
	918	<xsl:text> $PKG_DEST/</xsl:text>
	919	<xsl:call-template name="outputpkgdest">
	920	<xsl:with-param name="outputstring" select="substring-after($outputstring,' /')"/>
	921	</xsl:call-template>
	922	</xsl:when>
	923	<xsl:otherwise>
	924	<xsl:value-of select="$outputstring"/>
	925	<xsl:text> </xsl:text>
	926	</xsl:otherwise>
	927	</xsl:choose>
	928	</xsl:otherwise>
	929	</xsl:choose>
	930	</xsl:template>
[df42c7c]	931
	932	<xsl:variable name="APOS">'</xsl:variable>
	933	<xsl:template name="output-wrap">
	934	<xsl:param name="commands" select="''"/>
	935	<xsl:choose>
	936	<xsl:when test="contains($commands,string($APOS))">
	937	<xsl:call-template name="output-wrap">
	938	<xsl:with-param name="commands"
	939	select="substring-before($commands,string($APOS))"/>
	940	</xsl:call-template>
	941	<xsl:text>'\''</xsl:text>
	942	<xsl:call-template name="output-wrap">
	943	<xsl:with-param name="commands"
	944	select="substring-after($commands,string($APOS))"/>
	945	</xsl:call-template>
	946	</xsl:when>
	947	<xsl:otherwise>
	948	<xsl:value-of select="$commands"/>
	949	</xsl:otherwise>
	950	</xsl:choose>
	951	</xsl:template>
	952
[557fe91]	953	</xsl:stylesheet>

Note: See TracBrowser for help on using the repository browser.

Download in other formats: