Context Navigation

source: LFS/lfs.xsl@ e2dd7c4

2.4-rc1

Last change on this file since e2dd7c4 was 00313dd, checked in by Pierre Labastie <pierre@…>, 9 years ago
Remove man pages in section 5 for attr, since they are already installed by man-pages
Property mode set to `100644`
File size: 24.9 KB

Rev	Line
[7072e1f]	1	<?xml version="1.0" encoding="ISO-8859-1"?>
[db181c47]	2
[877cc6a]	3	<!-- $Id$ -->
	4
[7072e1f]	5	<xsl:stylesheet
	6	xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
	7	xmlns:exsl="http://exslt.org/common"
	8	extension-element-prefixes="exsl"
	9	version="1.0">
[557fe91]	10
[7072e1f]	11	<!-- use package management ?
	12	n = no, original behavior
	13	y = yes, add PKG_DEST to scripts in install commands of chapter06-08
	14	-->
	15	<xsl:param name="pkgmngt" select="n"/>
	16
[31d6944]	17	<!-- Run test suites?
	18	0 = none
	19	1 = only chapter06 Glibc, GCC and Binutils testsuites
	20	2 = all chapter06 testsuites
[28f4756]	21	3 = all chapter05 and chapter06 testsuites
	22	-->
[31d6944]	23	<xsl:param name="testsuite" select="1"/>
[01e51a1]	24
[28f4756]	25	<!-- Bomb on test suites failures?
[401f81e]	26	n = no, I want to build the full system and review the logs
	27	y = yes, bomb at the first test suite failure to can review the build dir
[28f4756]	28	-->
[401f81e]	29	<xsl:param name="bomb-testsuite" select="n"/>
[28f4756]	30
[7072e1f]	31	<!-- Install vim-lang package? OBSOLETE should always be 'n'-->
	32	<xsl:param name="vim-lang" select="n"/>
	33
[877cc6a]	34	<!-- Time zone -->
[a229600]	35	<xsl:param name="timezone" select="GMT"/>
[7072e1f]	36
[877cc6a]	37	<!-- Page size -->
	38	<xsl:param name="page" select="letter"/>
[7072e1f]	39
[877cc6a]	40	<!-- Locale settings -->
[a229600]	41	<xsl:param name="lang" select="C"/>
[b339c94]	42
	43	<!-- Install the whole set of locales -->
	44	<xsl:param name='full-locale' select='n'/>
[7072e1f]	45
[557fe91]	46	<xsl:template match="/">
	47	<xsl:apply-templates select="//sect1"/>
	48	</xsl:template>
[7072e1f]	49
[557fe91]	50	<xsl:template match="sect1">
[7072e1f]	51	<xsl:if test="(../@id='chapter-temporary-tools' or
[14eaa9f]	52	../@id='chapter-building-system' or
	53	../@id='chapter-bootscripts' or
	54	../@id='chapter-bootable') and
	55	count(descendant::screen/userinput) > 0 and
	56	count(descendant::screen/userinput) >
[d68eb1b]	57	count(descendant::screen[@role='nodump']) and
	58	count(descendant::screen/userinput) >
	59	count(descendant::screen/userinput[starts-with(string(),'chroot')])">
	60	<!-- The last condition is a hack to allow previous versions of the
	61	book where the chroot commands did not have role="nodump".
	62	It only works if the chroot command is the only one on the page -->
[c4cf6de]	63	<!-- The dirs names -->
	64	<xsl:variable name="pi-dir" select="../processing-instruction('dbhtml')"/>
	65	<xsl:variable name="pi-dir-value" select="substring-after($pi-dir,'dir=')"/>
	66	<xsl:variable name="quote-dir" select="substring($pi-dir-value,1,1)"/>
	67	<xsl:variable name="dirname" select="substring-before(substring($pi-dir-value,2),$quote-dir)"/>
[7072e1f]	68	<!-- The file names -->
	69	<xsl:variable name="pi-file" select="processing-instruction('dbhtml')"/>
	70	<xsl:variable name="pi-file-value" select="substring-after($pi-file,'filename=')"/>
	71	<xsl:variable name="filename" select="substring-before(substring($pi-file-value,2),'.html')"/>
	72	<!-- The build order -->
	73	<xsl:variable name="position" select="position()"/>
	74	<xsl:variable name="order">
	75	<xsl:choose>
	76	<xsl:when test="string-length($position) = 1">
	77	<xsl:text>00</xsl:text>
	78	<xsl:value-of select="$position"/>
	79	</xsl:when>
	80	<xsl:when test="string-length($position) = 2">
	81	<xsl:text>0</xsl:text>
	82	<xsl:value-of select="$position"/>
	83	</xsl:when>
	84	<xsl:otherwise>
	85	<xsl:value-of select="$position"/>
	86	</xsl:otherwise>
	87	</xsl:choose>
	88	</xsl:variable>
	89	<!-- Inclusion of package manager scriptlets -->
	90	<xsl:if test="@id='ch-tools-stripping' and $pkgmngt='y'">
	91	<xsl:apply-templates
[575bcf3]	92	select="document('packageManager.xml')//sect1[contains(@id,'ch-tools')]"
[7072e1f]	93	mode="pkgmngt">
[575bcf3]	94	<xsl:with-param name="order" select="$order"/>
[7072e1f]	95	<xsl:with-param name="dirname" select="$dirname"/>
	96	</xsl:apply-templates>
	97	</xsl:if>
	98	<xsl:if test="@id='ch-system-strippingagain' and $pkgmngt='y'">
	99	<xsl:apply-templates
[575bcf3]	100	select="document('packageManager.xml')//sect1[contains(@id,'ch-system')]"
[7072e1f]	101	mode="pkgmngt">
[575bcf3]	102	<xsl:with-param name="order" select="$order"/>
[7072e1f]	103	<xsl:with-param name="dirname" select="$dirname"/>
	104	</xsl:apply-templates>
	105	</xsl:if>
	106	<!-- Creating dirs and files -->
	107	<exsl:document href="{$dirname}/{$order}-{$filename}" method="text">
	108	<xsl:choose>
	109	<xsl:when test="@id='ch-system-creatingdirs' or
	110	@id='ch-system-createfiles' or
	111	@id='ch-system-strippingagain'">
	112	<xsl:text>#!/tools/bin/bash set +h </xsl:text>
	113	</xsl:when>
	114	<xsl:otherwise>
	115	<xsl:text>#!/bin/bash set +h </xsl:text>
	116	</xsl:otherwise>
	117	</xsl:choose>
	118	<xsl:if test="not(@id='ch-tools-stripping') and
	119	not(@id='ch-system-strippingagain')">
	120	<xsl:text>set -e </xsl:text>
	121	</xsl:if>
	122	<xsl:text> </xsl:text>
	123	<xsl:if test="sect2[@role='installation']">
	124	<xsl:text>cd $PKGDIR </xsl:text>
	125	</xsl:if>
[f0a31de]	126	<xsl:apply-templates select="sect2\|
	127	screen[not(@role) or
	128	@role!='nodump']/userinput"/>
[e6e0c85]	129	<xsl:if test="@id='ch-system-creatingdirs' and $pkgmngt='y'">
[f0a31de]	130	<xsl:apply-templates
	131	select="document('packageManager.xml')//sect1[
	132	@id='ch-pkgmngt-creatingdirs'
[e6e0c85]	133	]//userinput"
	134	mode="pkgmngt"/>
[f0a31de]	135	</xsl:if>
[e6e0c85]	136	<xsl:if test="@id='ch-system-createfiles' and $pkgmngt='y'">
[f0a31de]	137	<xsl:apply-templates
	138	select="document('packageManager.xml')//sect1[
	139	@id='ch-pkgmngt-createfiles'
[e6e0c85]	140	]//userinput"
	141	mode="pkgmngt"/>
[f0a31de]	142	</xsl:if>
[d68eb1b]	143	<xsl:text>echo -e "\n\nTotalseconds: $SECONDS\n" </xsl:text>
[f0a31de]	144	<xsl:text>exit </xsl:text>
	145	</exsl:document>
	146	</xsl:if>
	147	</xsl:template>
	148
	149	<xsl:template match="sect2">
	150	<xsl:apply-templates
	151	select=".//screen[not(@role) or
	152	@role != 'nodump']/userinput[
	153	@remap = 'pre' or
	154	@remap = 'configure' or
	155	@remap = 'make' or
	156	@remap = 'test' and
[f2e80ac]	157	not(current()/../@id='ch-tools-dejagnu') and
	158	not(current()/../@id='ch-system-systemd')]"/>
[f0a31de]	159	<xsl:if
	160	test="ancestor::chapter[@id != 'chapter-temporary-tools'] and
	161	$pkgmngt = 'y' and
	162	descendant::screen[not(@role) or
	163	@role != 'nodump']/userinput[
	164	@remap='install']">
	165	<xsl:text>mkdir -pv $PKG_DEST/{boot,etc,lib,bin,sbin}
[7072e1f]	166	mkdir -pv $PKG_DEST/usr/{lib,bin,sbin,include}
	167	mkdir -pv $PKG_DEST/usr/share/{doc,info,man}
	168	mkdir -pv $PKG_DEST/usr/share/man/man{1..8}
	169	ln -sv share/{man,doc,info} $PKG_DEST/usr
	170	case $(uname -m) in
	171	x86_64) ln -sv lib $PKG_DEST/lib64 && ln -sv lib $PKG_DEST/usr/lib64 ;;
	172	esac
	173	</xsl:text>
[f0a31de]	174	</xsl:if>
	175	<xsl:if test="../@id = 'ch-system-glibc' and
[90f304c]	176	@role='installation' and
	177	$pkgmngt = 'y'">
[f0a31de]	178	<xsl:text>mkdir -pv $PKG_DEST/usr/include/{rpc,rpcsvc}
[7072e1f]	179	</xsl:text>
[f0a31de]	180	</xsl:if>
	181	<xsl:apply-templates
	182	select=".//screen[not(@role) or
	183	@role != 'nodump']/userinput[@remap = 'install']"/>
	184	<xsl:if test="ancestor::chapter[@id != 'chapter-temporary-tools'] and
	185	$pkgmngt = 'y' and
	186	descendant::screen[not(@role) or
	187	@role != 'nodump']/userinput[
	188	@remap='install']">
	189	<xsl:if test="../@id = 'ch-system-man-pages'">
[560bef1]	190	<!-- these files are provided by the shadow package -->
[7072e1f]	191	<xsl:text>rm -fv $PKG_DEST/usr/share/man/{man3/getspnam.3,man5/passwd.5}
[560bef1]	192	</xsl:text>
	193	</xsl:if>
	194	<!-- Attr man/man2 pages are already installed by man-pages. As of
[00313dd]	195	March 2013, they are the same pages.
	196	November 2015: now they are more accurate
	197	in man-pages, and the man5 section is also in man-pages... -->
[560bef1]	198	<xsl:if test="../@id = 'ch-system-attr'">
	199	<xsl:text>rm -fv $PKG_DEST/usr/share/man/man2/*
[00313dd]	200	rm -fv $PKG_DEST/usr/share/man/man5/*
[a983256]	201	</xsl:text>
	202	</xsl:if>
	203	<!-- nologin is installed by util-linux. remove it from shadow -->
	204	<xsl:if test="../@id = 'ch-system-shadow'">
	205	<xsl:text>rm -fv $PKG_DEST/usr/share/man/man8/nologin.8
	206	rm -fv $PKG_DEST/sbin/nologin
[7072e1f]	207	</xsl:text>
[f0a31de]	208	</xsl:if>
	209	<xsl:text>rm -fv $PKG_DEST/{,usr/}lib64
[7072e1f]	210	rm -fv $PKG_DEST/usr/{man,doc,info}
	211	for dir in $PKG_DEST/usr/share/man/man{1..8}; do
	212	[[ -z $(ls $dir) ]] && rmdir -v $dir
	213	done
	214	for dir in $PKG_DEST/usr/share/{doc,info,man}; do
	215	[[ -z $(ls $dir) ]] && rmdir -v $dir
	216	done
	217	for dir in $PKG_DEST/usr/{lib,bin,sbin,include}; do
	218	[[ -z $(ls $dir) ]] && rmdir -v $dir
	219	done
	220	for dir in $PKG_DEST/{boot,etc,lib,bin,sbin}; do
	221	[[ -z $(ls $dir) ]] && rmdir -v $dir
	222	done
	223	packInstall
	224	rm -rf $PKG_DEST
	225	</xsl:text>
[f0a31de]	226	</xsl:if>
	227	<xsl:if test="$testsuite='3' and
	228	../@id='ch-tools-glibc' and
	229	@role='installation'">
	230	<xsl:copy-of select="//userinput[@remap='locale-test']"/>
	231	<xsl:text> </xsl:text>
	232	</xsl:if>
	233	<xsl:if test="../@id='ch-system-glibc' and @role='installation'">
	234	<xsl:choose>
	235	<xsl:when test="$full-locale='y'">
	236	<xsl:copy-of select="//userinput[@remap='locale-full']"/>
	237	<xsl:text> </xsl:text>
	238	</xsl:when>
	239	<xsl:otherwise>
	240	<xsl:copy-of select="//userinput[@remap='locale-test']"/>
	241	<xsl:text> </xsl:text>
	242	<xsl:if test="not(contains(string(//userinput[@remap='locale-test']),$lang)) and $lang!='C' and $lang!='POSIX'">
	243	<xsl:text>if LOCALE=`grep "</xsl:text>
	244	<xsl:value-of select="$lang"/>
	245	<xsl:text>/" $PKGDIR/localedata/SUPPORTED`; then
[b339c94]	246	CHARMAP=`echo $LOCALE \| sed 's,[^/]/\([^ ]\) [\],\1,'`
	247	INPUT=`echo $LOCALE \| sed 's,[/.].*,,'`
	248	LOCALE=`echo $LOCALE \| sed 's,/.*,,'`
	249	localedef -i $INPUT -f $CHARMAP $LOCALE
	250	fi
	251	</xsl:text>
[f0a31de]	252	</xsl:if>
	253	</xsl:otherwise>
	254	</xsl:choose>
[c4cf6de]	255	</xsl:if>
[f0a31de]	256	<xsl:apply-templates
	257	select=".//screen[
	258	not(@role) or
	259	@role != 'nodump'
	260	]/userinput[
[f2e80ac]	261	not(@remap) or
	262	@remap='adjust' or
	263	@remap='test' and current()/../@id='ch-tools-dejagnu' or
	264	@remap='test' and current()/../@id='ch-system-systemd'
[f0a31de]	265	]"/>
[557fe91]	266	</xsl:template>
	267
[f0a31de]	268	<xsl:template match="sect1" mode="pkgmngt">
[7072e1f]	269	<xsl:param name="dirname" select="chapter05"/>
	270	<!-- The build order -->
[575bcf3]	271	<xsl:param name="order" select="062"/>
[7072e1f]	272	<!-- The file names -->
	273	<xsl:variable name="pi-file" select="processing-instruction('dbhtml')"/>
	274	<xsl:variable name="pi-file-value" select="substring-after($pi-file,'filename=')"/>
	275	<xsl:variable name="filename" select="substring-before(substring($pi-file-value,2),'.html')"/>
	276	<!-- Creating dirs and files -->
[8099885]	277	<xsl:if test="count(descendant::screen/userinput) > 0 and
	278	count(descendant::screen/userinput) >
	279	count(descendant::screen[@role='nodump'])">
	280	<exsl:document href="{$dirname}/{$order}-{position()}-{$filename}"
	281	method="text">
	282	<xsl:text>#!/bin/bash
[7072e1f]	283	set +h
	284	set -e
	285
	286	cd $PKGDIR
	287	</xsl:text>
[8099885]	288	<xsl:apply-templates
	289	select=".//screen[not(@role) or
	290	@role != 'nodump']/userinput[@remap != 'adjust']"
[7072e1f]	291	mode="pkgmngt"/>
[8099885]	292	<xsl:if test="$dirname = 'chapter06'">
	293	<xsl:text>packInstall
[7072e1f]	294	rm -rf $PKG_DEST
	295	</xsl:text>
[8099885]	296	</xsl:if>
	297	<xsl:apply-templates
	298	select=".//screen[not(@role) or
	299	@role != 'nodump'
	300	]/userinput[not(@remap) or
	301	@remap='adjust'
[7072e1f]	302	]"
	303	mode="pkgmngt"/>
[8099885]	304	<xsl:text>
[7072e1f]	305	echo -e "\n\nTotalseconds: $SECONDS\n"
	306	exit
	307	</xsl:text>
[8099885]	308	</exsl:document>
	309	</xsl:if>
[557fe91]	310	</xsl:template>
	311
[7072e1f]	312	<xsl:template match="userinput" mode="pkgmngt">
	313	<xsl:apply-templates/>
	314	<xsl:text> </xsl:text>
	315	</xsl:template>
	316
	317	<xsl:template match="userinput">
[3eb60fa]	318	<xsl:choose>
[fd691b4]	319	<!-- Copying the kernel config file -->
	320	<xsl:when test="string() = 'make mrproper'">
	321	<xsl:text>make mrproper </xsl:text>
[7072e1f]	322	<xsl:if test="ancestor::sect1[@id='ch-bootable-kernel']">
[bcfb3bf]	323	<xsl:text>cp -v ../kernel-config .config </xsl:text>
	324	</xsl:if>
[92568bf]	325	</xsl:when>
[7072e1f]	326	<!-- test instructions -->
	327	<xsl:when test="@remap = 'test'">
[4afcedb]	328	<xsl:choose>
	329	<xsl:when test="$testsuite = '0'"/>
	330	<xsl:when test="$testsuite = '1' and
	331	not(ancestor::sect1[@id='ch-system-gcc']) and
	332	not(ancestor::sect1[@id='ch-system-glibc']) and
[7072e1f]	333	not(ancestor::sect1[@id='ch-system-gmp']) and
	334	not(ancestor::sect1[@id='ch-system-mpfr']) and
[4afcedb]	335	not(ancestor::sect1[@id='ch-system-binutils'])"/>
	336	<xsl:when test="$testsuite = '2' and
	337	ancestor::chapter[@id='chapter-temporary-tools']"/>
	338	<xsl:otherwise>
	339	<xsl:choose>
	340	<xsl:when test="$bomb-testsuite = 'n'">
[7072e1f]	341	<xsl:choose>
	342	<!-- special case for glibc -->
	343	<xsl:when test="contains(string(), 'glibc-check-log')">
	344	<xsl:value-of
	345	select="substring-before(string(),'2>&1')"/>
	346	<xsl:text>>> $TEST_LOG 2>&1 \|\| true </xsl:text>
	347	</xsl:when>
[e40a68e]	348	<!-- special case for procps-ng -->
	349	<xsl:when test="contains(string(), 'pushd')">
	350	<xsl:text>{ </xsl:text>
	351	<xsl:apply-templates/>
	352	<xsl:text>; } >> $TEST_LOG 2>&1 \|\| true </xsl:text>
	353	</xsl:when>
[7072e1f]	354	<xsl:when test="contains(string(), 'make -k')">
	355	<xsl:apply-templates/>
	356	<xsl:text> >> $TEST_LOG 2>&1 \|\| true </xsl:text>
	357	</xsl:when>
	358	<xsl:when test="contains(string(), 'make')">
	359	<xsl:value-of select="substring-before(string(),'make')"/>
	360	<xsl:text>make -k</xsl:text>
	361	<xsl:value-of select="substring-after(string(),'make')"/>
	362	<xsl:text> >> $TEST_LOG 2>&1 \|\| true </xsl:text>
	363	</xsl:when>
	364	<xsl:otherwise>
	365	<xsl:apply-templates/>
	366	<xsl:if test="not(contains(string(), '>>'))">
	367	<xsl:text> >> $TEST_LOG 2>&1</xsl:text>
	368	</xsl:if>
	369	<xsl:text> </xsl:text>
	370	</xsl:otherwise>
	371	</xsl:choose>
[4afcedb]	372	</xsl:when>
	373	<xsl:otherwise>
[7072e1f]	374	<!-- bomb-testsuite != 'n'-->
	375	<xsl:choose>
	376	<!-- special case for glibc -->
	377	<xsl:when test="contains(string(), 'glibc-check-log')">
	378	<xsl:value-of
	379	select="substring-before(string(),'2>&1')"/>
[2c9a16b]	380	<xsl:text>>> $TEST_LOG 2>&1 \|\| true </xsl:text>
[7072e1f]	381	</xsl:when>
[e40a68e]	382	<!-- special case for gmp -->
[f663589]	383	<xsl:when test="contains(string(), 'tee gmp-check-log')">
	384	<xsl:text>(</xsl:text>
	385	<xsl:apply-templates/>
	386	<xsl:text>>> $TEST_LOG 2>&1 && exit $PIPESTATUS) </xsl:text>
	387	</xsl:when>
[e40a68e]	388	<!-- special case for procps-ng -->
	389	<xsl:when test="contains(string(), 'pushd')">
	390	<xsl:text>{ </xsl:text>
	391	<xsl:apply-templates/>
	392	<xsl:text>; } >> $TEST_LOG 2>&1 </xsl:text>
	393	</xsl:when>
[2c9a16b]	394	<xsl:when test="contains(string(), 'make -k')">
	395	<xsl:apply-templates/>
	396	<xsl:text> >> $TEST_LOG 2>&1 \|\| true </xsl:text>
	397	</xsl:when>
[7072e1f]	398	<xsl:otherwise>
	399	<xsl:apply-templates/>
	400	<xsl:if test="not(contains(string(), '>>'))">
	401	<xsl:text> >> $TEST_LOG 2>&1</xsl:text>
	402	</xsl:if>
	403	<xsl:text> </xsl:text>
	404	</xsl:otherwise>
	405	</xsl:choose>
[4afcedb]	406	</xsl:otherwise>
	407	</xsl:choose>
	408	</xsl:otherwise>
	409	</xsl:choose>
	410	</xsl:when>
[7072e1f]	411	<!-- End of test instructions -->
[fd691b4]	412	<!-- Don't stop on strip run -->
	413	<xsl:when test="contains(string(),'strip ')">
[3eb60fa]	414	<xsl:apply-templates/>
[fd691b4]	415	<xsl:text> \|\| true </xsl:text>
[1f025ca]	416	</xsl:when>
[7072e1f]	417	<!-- Package management -->
	418	<!-- Add $PKG_DEST to installation commands -->
	419	<xsl:when test="@remap='install' and
	420	not(ancestor::chapter[
	421	@id='chapter-temporary-tools'
	422	])">
	423	<xsl:choose>
	424	<xsl:when test="$pkgmngt='n'">
	425	<xsl:choose>
	426	<xsl:when test="contains(string(),'firmware,udev')">
	427	<xsl:text>if [[ ! -d /lib/udev/devices ]] ; then </xsl:text>
	428	<xsl:apply-templates/>
	429	<xsl:text> fi </xsl:text>
	430	</xsl:when>
	431	<xsl:otherwise>
	432	<xsl:apply-templates/>
	433	<xsl:text> </xsl:text>
	434	</xsl:otherwise>
	435	</xsl:choose>
	436	</xsl:when>
	437	<xsl:otherwise><!--pkgmngt = 'y'-->
	438	<xsl:choose>
	439	<xsl:when test="./literal">
	440	<xsl:call-template name="outputpkgdest">
[560bef1]	441	<xsl:with-param name="outputstring" select="text()[1]"/>
[7072e1f]	442	</xsl:call-template>
	443	<xsl:apply-templates select="literal"/>
	444	<xsl:call-template name="outputpkgdest">
[560bef1]	445	<xsl:with-param name="outputstring" select="text()[2]"/>
[7072e1f]	446	</xsl:call-template>
	447	</xsl:when>
	448	<xsl:otherwise>
	449	<xsl:call-template name="outputpkgdest">
	450	<xsl:with-param name="outputstring" select="string()"/>
	451	</xsl:call-template>
	452	</xsl:otherwise>
	453	</xsl:choose>
	454	</xsl:otherwise>
	455	</xsl:choose>
	456	</xsl:when>
[57ef0c1]	457	<!-- if package management, we should make an independant package for
	458	tzdata. -->
	459	<xsl:when test="contains(string(),'tzdata') and $pkgmngt='y'">
	460	<xsl:text>
	461	OLD_PKG_DEST=$PKG_DEST
	462	OLD_PKGDIR=$PKGDIR
[56d8426]	463	PKG_DEST=$(dirname $OLD_PKG_DEST)/001-tzdata
[57ef0c1]	464	PKGDIR=$(dirname $PKGDIR)/tzdata-</xsl:text>
	465	<xsl:copy-of select="substring-before(
	466	substring-after(string(),'tzdata'),
	467	'.tar')"/>
	468	<xsl:text>
	469	</xsl:text>
	470	<xsl:copy-of select="substring-before(string(),'ZONEINFO=')"/>
	471	<xsl:text>ZONEINFO=$PKG_DEST</xsl:text>
	472	<xsl:copy-of select="substring-after(string(),'ZONEINFO=')"/>
	473	<xsl:text>
	474	packInstall
	475	rm -rf $PKG_DEST
	476	PKG_DEST=$OLD_PKG_DEST
	477	unset OLD_PKG_DEST
	478	PKGDIR=$OLD_PKGDIR
	479	unset OLD_PKGDIR
	480	</xsl:text>
	481	</xsl:when><!-- addition for tzdata + package management -->
[7072e1f]	482	<!-- End addition for package management -->
[fd691b4]	483	<!-- The rest of commands -->
[1f025ca]	484	<xsl:otherwise>
	485	<xsl:apply-templates/>
[fd691b4]	486	<xsl:text> </xsl:text>
[1f025ca]	487	</xsl:otherwise>
	488	</xsl:choose>
	489	</xsl:template>
[7072e1f]	490
[557fe91]	491	<xsl:template match="replaceable">
[a41ce58]	492	<xsl:choose>
[2a54650]	493	<xsl:when test="ancestor::sect1[@id='ch-system-glibc']">
[877cc6a]	494	<xsl:value-of select="$timezone"/>
[2a54650]	495	</xsl:when>
[a41ce58]	496	<xsl:when test="ancestor::sect1[@id='ch-system-groff']">
[877cc6a]	497	<xsl:value-of select="$page"/>
[a41ce58]	498	</xsl:when>
[81a7fb8]	499	<xsl:when test="contains(string(.),'<ll>_<CC>')">
	500	<xsl:value-of select="$lang"/>
	501	</xsl:when>
[a41ce58]	502	<xsl:otherwise>
	503	<xsl:text>**EDITME</xsl:text>
	504	<xsl:apply-templates/>
	505	<xsl:text>EDITME**</xsl:text>
	506	</xsl:otherwise>
	507	</xsl:choose>
[557fe91]	508	</xsl:template>
[7072e1f]	509
	510	<xsl:template name="outputpkgdest">
	511	<xsl:param name="outputstring" select="foo"/>
	512	<xsl:choose>
	513	<xsl:when test="contains($outputstring,'make ')">
	514	<xsl:choose>
	515	<xsl:when test="not(starts-with($outputstring,'make'))">
	516	<xsl:call-template name="outputpkgdest">
	517	<xsl:with-param name="outputstring"
	518	select="substring-before($outputstring,'make')"/>
	519	</xsl:call-template>
	520	<xsl:call-template name="outputpkgdest">
	521	<xsl:with-param
	522	name="outputstring"
	523	select="substring-after($outputstring,
	524	substring-before($outputstring,'make'))"/>
	525	</xsl:call-template>
	526	</xsl:when>
	527	<xsl:otherwise>
	528	<xsl:choose>
	529	<!-- special cases (no DESTDIR) here -->
	530	<xsl:when test="ancestor::sect1[@id='ch-system-glibc']">
	531	<xsl:text>make install_root=$PKG_DEST -j1</xsl:text>
	532	<xsl:value-of
	533	select="substring-before(substring-after(string(),'make'),
	534	'install')"/>
	535	<xsl:text>install </xsl:text>
	536	</xsl:when>
	537	<xsl:when test="ancestor::sect1[@id='ch-system-bzip2']">
	538	<xsl:text>make PREFIX=$PKG_DEST/usr install </xsl:text>
	539	</xsl:when>
	540	<xsl:when test="ancestor::sect1[@id='ch-system-sysklogd']">
	541	<xsl:text>make BINDIR=$PKG_DEST/sbin prefix=$PKG_DEST install </xsl:text>
	542	</xsl:when>
	543	<xsl:when test="ancestor::sect1[@id='ch-system-iproute2']">
[b1f4a8d]	544	<xsl:text>make DESTDIR=$PKG_DEST DOCDIR=</xsl:text>
[7072e1f]	545	<xsl:value-of
[b1f4a8d]	546	select="substring-before(substring-after(string(),'DOCDIR='),
[7072e1f]	547	'install')"/>
	548	<xsl:text>install </xsl:text>
	549	</xsl:when>
	550	<xsl:when test="ancestor::sect1[@id='ch-system-sysvinit']">
	551	<xsl:text>make ROOT=$PKG_DEST</xsl:text>
	552	<xsl:value-of
	553	select="substring-before(substring-after(string(),'make'),
	554	'install')"/>
	555	<xsl:text>install </xsl:text>
	556	</xsl:when>
	557	<xsl:when test="ancestor::sect1[@id='ch-bootable-kernel']">
	558	<xsl:text>make INSTALL_MOD_PATH=$PKG_DEST</xsl:text>
	559	<xsl:value-of
	560	select="substring-before(substring-after(string(),'make'),
	561	'install')"/>
	562	<xsl:text>install </xsl:text>
	563	</xsl:when>
[560bef1]	564	<xsl:when test="ancestor::sect1[@id='ch-system-attr']">
	565	<xsl:text>DIST_ROOT=$PKG_DEST make</xsl:text>
	566	<xsl:call-template name="outputpkgdest">
	567	<xsl:with-param name="outputstring"
	568	select="substring-after($outputstring,'make')"/>
	569	</xsl:call-template>
	570	</xsl:when>
[7072e1f]	571	<xsl:otherwise>
[560bef1]	572	<xsl:text>make DESTDIR=$PKG_DEST</xsl:text>
[e6e0c85]	573	<xsl:call-template name="outputpkgdest">
[560bef1]	574	<xsl:with-param
[7072e1f]	575	name="outputstring"
	576	select="substring-after($outputstring,'make')"/>
[560bef1]	577	</xsl:call-template>
[7072e1f]	578	</xsl:otherwise>
	579	</xsl:choose>
	580	</xsl:otherwise>
	581	</xsl:choose>
	582	</xsl:when>
	583	<xsl:otherwise> <!-- no make in this string -->
	584	<xsl:choose>
	585	<xsl:when test="contains($outputstring,'>/') and
	586	not(contains(substring-before($outputstring,'>/'),' /'))">
	587	<xsl:value-of select="substring-before($outputstring,'>/')"/>
	588	<xsl:text>>$PKG_DEST/</xsl:text>
	589	<xsl:call-template name="outputpkgdest">
	590	<xsl:with-param name="outputstring" select="substring-after($outputstring,'>/')"/>
	591	</xsl:call-template>
	592	</xsl:when>
	593	<xsl:when test="contains($outputstring,' /')">
	594	<xsl:value-of select="substring-before($outputstring,' /')"/>
	595	<xsl:text> $PKG_DEST/</xsl:text>
	596	<xsl:call-template name="outputpkgdest">
	597	<xsl:with-param name="outputstring" select="substring-after($outputstring,' /')"/>
	598	</xsl:call-template>
	599	</xsl:when>
	600	<xsl:otherwise>
	601	<xsl:value-of select="$outputstring"/>
	602	<xsl:text> </xsl:text>
	603	</xsl:otherwise>
	604	</xsl:choose>
	605	</xsl:otherwise>
	606	</xsl:choose>
	607	</xsl:template>
[557fe91]	608	</xsl:stylesheet>

Note: See TracBrowser for help on using the repository browser.

Download in other formats: