source: LFS/lfs.xsl@ 77fa8ba

new_features
Last change on this file since 77fa8ba was 77fa8ba, checked in by Pierre Labastie <pierre@…>, 9 years ago

Add IP, hostname, domain, etc to the list of configuration parameters.
Font and encoding are in configuration too, but are not passed to the build
commands
Works only for LFS
  • Property mode set to 100644
File size: 29.8 KB
Line 
1<?xml version="1.0" encoding="ISO-8859-1"?>
2
3<!-- $Id$ -->
4
5<xsl:stylesheet
6 xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
7 xmlns:exsl="http://exslt.org/common"
8 extension-element-prefixes="exsl"
9 version="1.0">
10
11<!-- Parameters -->
12
13 <!-- use package management ?
14 n = no, original behavior
15 y = yes, add PKG_DEST to scripts in install commands of chapter06-08
16 -->
17 <xsl:param name="pkgmngt" select="n"/>
18
19 <!-- Run test suites?
20 0 = none
21 1 = only chapter06 critical testsuites
22 2 = all chapter06 testsuites
23 3 = all chapter05 and chapter06 testsuites
24 -->
25 <xsl:param name="testsuite" select="1"/>
26
27 <!-- Bomb on test suites failures?
28 n = no, I want to build the full system and review the logs
29 y = yes, bomb at the first test suite failure to can review the build dir
30 -->
31 <xsl:param name="bomb-testsuite" select="n"/>
32
33 <!-- Install vim-lang package? OBSOLETE should always be 'n'-->
34 <xsl:param name="vim-lang" select="n"/>
35
36 <!-- Time zone -->
37 <xsl:param name="timezone" select="GMT"/>
38
39 <!-- Page size -->
40 <xsl:param name="page" select="letter"/>
41
42 <!-- Locale settings -->
43 <xsl:param name="lang" select="C"/>
44
45 <!-- Install the whole set of locales -->
46 <xsl:param name='full-locale' select='n'/>
47
48 <!-- Hostname -->
49 <xsl:param name='hostname' select='"HOSTNAME"'/>
50
51 <!-- Network parameters: interface, ip, gateway, prefix, broadcast, domain
52 and nameservers -->
53 <xsl:param name='interface' select='eth0'/>
54 <xsl:param name='ip' select='"10.0.2.9"'/>
55 <xsl:param name='gateway' select='"10.0.2.2"'/>
56 <xsl:param name='prefix' select='24'/>
57 <xsl:param name='broadcast' select='"10.0.2.255"'/>
58 <xsl:param name='domain' select='"lfs.org"'/>
59 <xsl:param name='nameserver1' select='"10.0.2.3"'/>
60 <xsl:param name='nameserver2' select='"8.8.8.8"'/>
61
62<!-- End parameters -->
63
64 <xsl:template match="/">
65 <xsl:apply-templates select="//sect1"/>
66 </xsl:template>
67
68 <xsl:template match="sect1">
69 <xsl:if test="(../@id='chapter-temporary-tools' or
70 ../@id='chapter-building-system' or
71 ../@id='chapter-bootscripts' or
72 ../@id='chapter-bootable') and
73 count(descendant::screen/userinput) &gt; 0 and
74 count(descendant::screen/userinput) &gt;
75 count(descendant::screen[@role='nodump']) and
76 count(descendant::screen/userinput) &gt;
77 count(descendant::screen/userinput[starts-with(string(),'chroot')])">
78<!-- The last condition is a hack to allow previous versions of the
79 book where the chroot commands did not have role="nodump".
80 It only works if the chroot command is the only one on the page -->
81 <!-- The dirs names -->
82 <xsl:variable name="pi-dir" select="../processing-instruction('dbhtml')"/>
83 <xsl:variable name="pi-dir-value" select="substring-after($pi-dir,'dir=')"/>
84 <xsl:variable name="quote-dir" select="substring($pi-dir-value,1,1)"/>
85 <xsl:variable name="dirname" select="substring-before(substring($pi-dir-value,2),$quote-dir)"/>
86 <!-- The file names -->
87 <xsl:variable name="pi-file" select="processing-instruction('dbhtml')"/>
88 <xsl:variable name="pi-file-value" select="substring-after($pi-file,'filename=')"/>
89 <xsl:variable name="filename" select="substring-before(substring($pi-file-value,2),'.html')"/>
90 <!-- The build order -->
91 <xsl:variable name="position" select="position()"/>
92 <xsl:variable name="order">
93 <xsl:choose>
94 <xsl:when test="string-length($position) = 1">
95 <xsl:text>00</xsl:text>
96 <xsl:value-of select="$position"/>
97 </xsl:when>
98 <xsl:when test="string-length($position) = 2">
99 <xsl:text>0</xsl:text>
100 <xsl:value-of select="$position"/>
101 </xsl:when>
102 <xsl:otherwise>
103 <xsl:value-of select="$position"/>
104 </xsl:otherwise>
105 </xsl:choose>
106 </xsl:variable>
107 <!-- Inclusion of package manager scriptlets -->
108 <xsl:if test="@id='ch-tools-stripping' and $pkgmngt='y'">
109 <xsl:apply-templates
110 select="document('packageManager.xml')//sect1[contains(@id,'ch-tools')]"
111 mode="pkgmngt">
112 <xsl:with-param name="order" select="$order"/>
113 <xsl:with-param name="dirname" select="$dirname"/>
114 </xsl:apply-templates>
115 </xsl:if>
116 <xsl:if test="@id='ch-system-strippingagain' and $pkgmngt='y'">
117 <xsl:apply-templates
118 select="document('packageManager.xml')//sect1[contains(@id,'ch-system')]"
119 mode="pkgmngt">
120 <xsl:with-param name="order" select="$order"/>
121 <xsl:with-param name="dirname" select="$dirname"/>
122 </xsl:apply-templates>
123 </xsl:if>
124 <!-- Creating dirs and files -->
125 <exsl:document href="{$dirname}/{$order}-{$filename}" method="text">
126 <xsl:choose>
127 <xsl:when test="@id='ch-system-creatingdirs' or
128 @id='ch-system-createfiles' or
129 @id='ch-system-strippingagain'">
130 <xsl:text>#!/tools/bin/bash&#xA;set +h&#xA;</xsl:text>
131 </xsl:when>
132 <xsl:otherwise>
133 <xsl:text>#!/bin/bash&#xA;set +h&#xA;</xsl:text>
134 </xsl:otherwise>
135 </xsl:choose>
136 <xsl:if test="not(@id='ch-tools-stripping') and
137 not(@id='ch-system-strippingagain')">
138 <xsl:text>set -e&#xA;</xsl:text>
139 </xsl:if>
140 <xsl:text>&#xA;</xsl:text>
141 <xsl:if test="sect2[@role='installation']">
142 <xsl:text>cd $PKGDIR&#xA;</xsl:text>
143 </xsl:if>
144 <xsl:apply-templates select="sect2|
145 screen[not(@role) or
146 @role!='nodump']/userinput"/>
147 <xsl:if test="@id='ch-system-creatingdirs' and $pkgmngt='y'">
148 <xsl:apply-templates
149 select="document('packageManager.xml')//sect1[
150 @id='ch-pkgmngt-creatingdirs'
151 ]//userinput"
152 mode="pkgmngt"/>
153 </xsl:if>
154 <xsl:if test="@id='ch-system-createfiles' and $pkgmngt='y'">
155 <xsl:apply-templates
156 select="document('packageManager.xml')//sect1[
157 @id='ch-pkgmngt-createfiles'
158 ]//userinput"
159 mode="pkgmngt"/>
160 </xsl:if>
161 <xsl:text>echo -e "\n\nTotalseconds: $SECONDS\n"&#xA;</xsl:text>
162 <xsl:text>exit&#xA;</xsl:text>
163 </exsl:document>
164 </xsl:if>
165 </xsl:template>
166
167 <xsl:template match="sect2">
168 <xsl:apply-templates
169 select=".//screen[not(@role) or
170 @role != 'nodump']/userinput[
171 @remap = 'pre' or
172 @remap = 'configure' or
173 @remap = 'make' or
174 @remap = 'test' and
175 not(current()/../@id='ch-tools-dejagnu') and
176 not(current()/../@id='ch-system-systemd')]"/>
177 <xsl:if
178 test="ancestor::chapter[@id != 'chapter-temporary-tools'] and
179 $pkgmngt = 'y' and
180 descendant::screen[not(@role) or
181 @role != 'nodump']/userinput[
182 @remap='install']">
183 <xsl:text>mkdir -pv $PKG_DEST/{boot,etc,lib,bin,sbin}
184mkdir -pv $PKG_DEST/usr/{lib,bin,sbin,include}
185mkdir -pv $PKG_DEST/usr/share/{doc,info,man}
186mkdir -pv $PKG_DEST/usr/share/man/man{1..8}
187ln -sv share/{man,doc,info} $PKG_DEST/usr
188case $(uname -m) in
189 x86_64) ln -sv lib $PKG_DEST/lib64 &amp;&amp; ln -sv lib $PKG_DEST/usr/lib64 ;;
190esac
191</xsl:text>
192 </xsl:if>
193 <xsl:if test="../@id = 'ch-system-glibc' and
194 @role='installation' and
195 $pkgmngt = 'y'">
196 <xsl:text>mkdir -pv $PKG_DEST/usr/include/{rpc,rpcsvc}
197</xsl:text>
198 </xsl:if>
199 <xsl:apply-templates
200 select=".//screen[not(@role) or
201 @role != 'nodump']/userinput[@remap = 'install']"/>
202 <xsl:if test="ancestor::chapter[@id != 'chapter-temporary-tools'] and
203 $pkgmngt = 'y' and
204 descendant::screen[not(@role) or
205 @role != 'nodump']/userinput[
206 @remap='install']">
207 <xsl:if test="../@id = 'ch-system-man-pages'">
208<!-- these files are provided by the shadow package -->
209 <xsl:text>rm -fv $PKG_DEST/usr/share/man/{man3/getspnam.3,man5/passwd.5}
210</xsl:text>
211 </xsl:if>
212<!-- Attr man/man2 pages are already installed by man-pages. As of
213 March 2013, they are the same pages.
214 November 2015: now they are more accurate
215 in man-pages, and the man5 section is also in man-pages... -->
216 <xsl:if test="../@id = 'ch-system-attr'">
217 <xsl:text>rm -fv $PKG_DEST/usr/share/man/man2/*
218rm -fv $PKG_DEST/usr/share/man/man5/*
219</xsl:text>
220 </xsl:if>
221<!-- nologin is installed by util-linux. remove it from shadow -->
222 <xsl:if test="../@id = 'ch-system-shadow'">
223 <xsl:text>rm -fv $PKG_DEST/usr/share/man/man8/nologin.8
224rm -fv $PKG_DEST/sbin/nologin
225</xsl:text>
226 </xsl:if>
227 <xsl:text>rm -fv $PKG_DEST/{,usr/}lib64
228rm -fv $PKG_DEST/usr/{man,doc,info}
229for dir in $PKG_DEST/usr/share/man/man{1..8}; do
230 [[ -z $(ls $dir) ]] &amp;&amp; rmdir -v $dir
231done
232for dir in $PKG_DEST/usr/share/{doc,info,man}; do
233 [[ -z $(ls $dir) ]] &amp;&amp; rmdir -v $dir
234done
235for dir in $PKG_DEST/usr/{lib,bin,sbin,include}; do
236 [[ -z $(ls $dir) ]] &amp;&amp; rmdir -v $dir
237done
238for dir in $PKG_DEST/{boot,etc,lib,bin,sbin}; do
239 [[ -z $(ls $dir) ]] &amp;&amp; rmdir -v $dir
240done
241packInstall
242rm -rf $PKG_DEST
243</xsl:text>
244 </xsl:if>
245 <xsl:if test="$testsuite='3' and
246 ../@id='ch-tools-glibc' and
247 @role='installation'">
248 <xsl:copy-of select="//userinput[@remap='locale-test']"/>
249 <xsl:text>&#xA;</xsl:text>
250 </xsl:if>
251 <xsl:if test="../@id='ch-system-glibc' and @role='installation'">
252 <xsl:choose>
253 <xsl:when test="$full-locale='y'">
254 <xsl:copy-of select="//userinput[@remap='locale-full']"/>
255 <xsl:text>&#xA;</xsl:text>
256 </xsl:when>
257 <xsl:otherwise>
258 <xsl:copy-of select="//userinput[@remap='locale-test']"/>
259 <xsl:text>&#xA;</xsl:text>
260 <xsl:if test="not(contains(string(//userinput[@remap='locale-test']),$lang)) and $lang!='C' and $lang!='POSIX'">
261 <xsl:text>if LOCALE=`grep "</xsl:text>
262 <xsl:value-of select="$lang"/>
263 <xsl:text>/" $PKGDIR/localedata/SUPPORTED`; then
264 CHARMAP=`echo $LOCALE | sed 's,[^/]*/\([^ ]*\) [\],\1,'`
265 INPUT=`echo $LOCALE | sed 's,[/.].*,,'`
266 LOCALE=`echo $LOCALE | sed 's,/.*,,'`
267 localedef -i $INPUT -f $CHARMAP $LOCALE
268fi
269</xsl:text>
270 </xsl:if>
271 </xsl:otherwise>
272 </xsl:choose>
273 </xsl:if>
274 <xsl:apply-templates
275 select=".//screen[
276 not(@role) or
277 @role != 'nodump'
278 ]/userinput[
279 not(@remap) or
280 @remap='adjust' or
281 @remap='test' and current()/../@id='ch-tools-dejagnu' or
282 @remap='test' and current()/../@id='ch-system-systemd'
283 ]"/>
284 </xsl:template>
285
286 <xsl:template match="sect1" mode="pkgmngt">
287 <xsl:param name="dirname" select="chapter05"/>
288 <!-- The build order -->
289 <xsl:param name="order" select="062"/>
290<!-- The file names -->
291 <xsl:variable name="pi-file" select="processing-instruction('dbhtml')"/>
292 <xsl:variable name="pi-file-value" select="substring-after($pi-file,'filename=')"/>
293 <xsl:variable name="filename" select="substring-before(substring($pi-file-value,2),'.html')"/>
294 <!-- Creating dirs and files -->
295 <xsl:if test="count(descendant::screen/userinput) &gt; 0 and
296 count(descendant::screen/userinput) &gt;
297 count(descendant::screen[@role='nodump'])">
298 <exsl:document href="{$dirname}/{$order}-{position()}-{$filename}"
299 method="text">
300 <xsl:text>#!/bin/bash
301set +h
302set -e
303
304cd $PKGDIR
305</xsl:text>
306 <xsl:apply-templates
307 select=".//screen[not(@role) or
308 @role != 'nodump']/userinput[@remap != 'adjust']"
309 mode="pkgmngt"/>
310 <xsl:if test="$dirname = 'chapter06'">
311 <xsl:text>packInstall
312rm -rf $PKG_DEST
313</xsl:text>
314 </xsl:if>
315 <xsl:apply-templates
316 select=".//screen[not(@role) or
317 @role != 'nodump'
318 ]/userinput[not(@remap) or
319 @remap='adjust'
320 ]"
321 mode="pkgmngt"/>
322 <xsl:text>
323echo -e "\n\nTotalseconds: $SECONDS\n"
324exit
325</xsl:text>
326 </exsl:document>
327 </xsl:if>
328 </xsl:template>
329
330 <xsl:template match="userinput" mode="pkgmngt">
331 <xsl:apply-templates/>
332 <xsl:text>&#xA;</xsl:text>
333 </xsl:template>
334
335 <xsl:template match="userinput">
336 <xsl:choose>
337 <!-- Copying the kernel config file -->
338 <xsl:when test="string() = 'make mrproper'">
339 <xsl:text>make mrproper&#xA;</xsl:text>
340 <xsl:if test="ancestor::sect1[@id='ch-bootable-kernel']">
341 <xsl:text>cp -v ../kernel-config .config&#xA;</xsl:text>
342 </xsl:if>
343 </xsl:when>
344<!-- test instructions -->
345 <xsl:when test="@remap = 'test'">
346 <xsl:choose>
347 <xsl:when test="$testsuite = '0'"/>
348 <xsl:when test="$testsuite = '1' and
349 not(ancestor::sect1[@id='ch-system-gcc']) and
350 not(ancestor::sect1[@id='ch-system-glibc']) and
351 not(ancestor::sect1[@id='ch-system-gmp']) and
352 not(ancestor::sect1[@id='ch-system-mpfr']) and
353 not(ancestor::sect1[@id='ch-system-binutils'])"/>
354 <xsl:when test="$testsuite = '2' and
355 ancestor::chapter[@id='chapter-temporary-tools']"/>
356 <xsl:otherwise>
357 <xsl:choose>
358 <xsl:when test="$bomb-testsuite = 'n'">
359 <xsl:choose>
360 <!-- special case for glibc -->
361 <xsl:when test="contains(string(), 'glibc-check-log')">
362 <xsl:value-of
363 select="substring-before(string(),'2&gt;&amp;1')"/>
364 <xsl:text>&gt;&gt; $TEST_LOG 2&gt;&amp;1 || true&#xA;</xsl:text>
365 </xsl:when>
366 <!-- special case for procps-ng -->
367 <xsl:when test="contains(string(), 'pushd')">
368 <xsl:text>{ </xsl:text>
369 <xsl:apply-templates/>
370 <xsl:text>; } &gt;&gt; $TEST_LOG 2&gt;&amp;1 || true&#xA;</xsl:text>
371 </xsl:when>
372 <xsl:when test="contains(string(), 'make -k')">
373 <xsl:apply-templates/>
374 <xsl:text> &gt;&gt; $TEST_LOG 2&gt;&amp;1 || true&#xA;</xsl:text>
375 </xsl:when>
376 <xsl:when test="contains(string(), 'make')">
377 <xsl:value-of select="substring-before(string(),'make')"/>
378 <xsl:text>make -k</xsl:text>
379 <xsl:value-of select="substring-after(string(),'make')"/>
380 <xsl:text> &gt;&gt; $TEST_LOG 2&gt;&amp;1 || true&#xA;</xsl:text>
381 </xsl:when>
382 <xsl:otherwise>
383 <xsl:apply-templates/>
384 <xsl:if test="not(contains(string(), '&gt;&gt;'))">
385 <xsl:text> &gt;&gt; $TEST_LOG 2&gt;&amp;1</xsl:text>
386 </xsl:if>
387 <xsl:text>&#xA;</xsl:text>
388 </xsl:otherwise>
389 </xsl:choose>
390 </xsl:when>
391 <xsl:otherwise>
392 <!-- bomb-testsuite != 'n'-->
393 <xsl:choose>
394 <!-- special case for glibc -->
395 <xsl:when test="contains(string(), 'glibc-check-log')">
396 <xsl:value-of
397 select="substring-before(string(),'2&gt;&amp;1')"/>
398 <xsl:text>&gt;&gt; $TEST_LOG 2&gt;&amp;1 || true&#xA;</xsl:text>
399 </xsl:when>
400 <!-- special case for gmp -->
401 <xsl:when test="contains(string(), 'tee gmp-check-log')">
402 <xsl:text>(</xsl:text>
403 <xsl:apply-templates/>
404 <xsl:text>&gt;&gt; $TEST_LOG 2&gt;&amp;1 &amp;&amp; exit $PIPESTATUS)&#xA;</xsl:text>
405 </xsl:when>
406 <!-- special case for procps-ng -->
407 <xsl:when test="contains(string(), 'pushd')">
408 <xsl:text>{ </xsl:text>
409 <xsl:apply-templates/>
410 <xsl:text>; } &gt;&gt; $TEST_LOG 2&gt;&amp;1&#xA;</xsl:text>
411 </xsl:when>
412 <xsl:when test="contains(string(), 'make -k')">
413 <xsl:apply-templates/>
414 <xsl:text> &gt;&gt; $TEST_LOG 2&gt;&amp;1 || true&#xA;</xsl:text>
415 </xsl:when>
416 <xsl:otherwise>
417 <xsl:apply-templates/>
418 <xsl:if test="not(contains(string(), '&gt;&gt;'))">
419 <xsl:text> &gt;&gt; $TEST_LOG 2&gt;&amp;1</xsl:text>
420 </xsl:if>
421 <xsl:text>&#xA;</xsl:text>
422 </xsl:otherwise>
423 </xsl:choose>
424 </xsl:otherwise>
425 </xsl:choose>
426 </xsl:otherwise>
427 </xsl:choose>
428 </xsl:when>
429<!-- End of test instructions -->
430 <!-- Don't stop on strip run -->
431 <xsl:when test="contains(string(),'strip ')">
432 <xsl:apply-templates/>
433 <xsl:text> || true&#xA;</xsl:text>
434 </xsl:when>
435<!-- Package management -->
436<!-- Add $PKG_DEST to installation commands -->
437 <xsl:when test="@remap='install' and
438 not(ancestor::chapter[
439 @id='chapter-temporary-tools'
440 ])">
441 <xsl:choose>
442 <xsl:when test="$pkgmngt='n'">
443 <xsl:choose>
444 <xsl:when test="contains(string(),'firmware,udev')">
445 <xsl:text>if [[ ! -d /lib/udev/devices ]] ; then&#xA;</xsl:text>
446 <xsl:apply-templates/>
447 <xsl:text>&#xA;fi&#xA;</xsl:text>
448 </xsl:when>
449 <xsl:otherwise>
450 <xsl:apply-templates/>
451 <xsl:text>&#xA;</xsl:text>
452 </xsl:otherwise>
453 </xsl:choose>
454 </xsl:when>
455 <xsl:otherwise><!--pkgmngt = 'y'-->
456 <xsl:choose>
457 <xsl:when test="./literal">
458 <xsl:call-template name="outputpkgdest">
459 <xsl:with-param name="outputstring" select="text()[1]"/>
460 </xsl:call-template>
461 <xsl:apply-templates select="literal"/>
462 <xsl:call-template name="outputpkgdest">
463 <xsl:with-param name="outputstring" select="text()[2]"/>
464 </xsl:call-template>
465 </xsl:when>
466 <xsl:otherwise>
467 <xsl:call-template name="outputpkgdest">
468 <xsl:with-param name="outputstring" select="string()"/>
469 </xsl:call-template>
470 </xsl:otherwise>
471 </xsl:choose>
472 </xsl:otherwise>
473 </xsl:choose>
474 </xsl:when>
475 <!-- if package management, we should make an independant package for
476 tzdata. -->
477 <xsl:when test="contains(string(),'tzdata') and $pkgmngt='y'">
478 <xsl:text>
479OLD_PKG_DEST=$PKG_DEST
480OLD_PKGDIR=$PKGDIR
481PKG_DEST=$(dirname $OLD_PKG_DEST)/001-tzdata
482PKGDIR=$(dirname $PKGDIR)/tzdata-</xsl:text>
483 <xsl:copy-of select="substring-before(
484 substring-after(string(),'tzdata'),
485 '.tar')"/>
486 <xsl:text>
487</xsl:text>
488 <xsl:copy-of select="substring-before(string(),'ZONEINFO=')"/>
489 <xsl:text>ZONEINFO=$PKG_DEST</xsl:text>
490 <xsl:copy-of select="substring-after(string(),'ZONEINFO=')"/>
491 <xsl:text>
492packInstall
493rm -rf $PKG_DEST
494PKG_DEST=$OLD_PKG_DEST
495unset OLD_PKG_DEST
496PKGDIR=$OLD_PKGDIR
497unset OLD_PKGDIR
498</xsl:text>
499 </xsl:when><!-- addition for tzdata + package management -->
500 <!-- End addition for package management -->
501 <!-- The rest of commands -->
502 <xsl:otherwise>
503 <xsl:apply-templates/>
504 <xsl:text>&#xA;</xsl:text>
505 </xsl:otherwise>
506 </xsl:choose>
507 </xsl:template>
508
509 <xsl:template match="replaceable">
510 <xsl:choose>
511 <xsl:when test="ancestor::sect1[@id='ch-system-glibc']">
512 <xsl:value-of select="$timezone"/>
513 </xsl:when>
514 <xsl:when test="ancestor::sect1[@id='ch-system-groff']">
515 <xsl:value-of select="$page"/>
516 </xsl:when>
517 <xsl:when test="contains(string(.),'&lt;ll&gt;_&lt;CC&gt;')">
518 <xsl:value-of select="$lang"/>
519 </xsl:when>
520 <xsl:when test="contains(string(.),'Domain')">
521 <xsl:value-of select="$domain"/>
522 </xsl:when>
523 <xsl:when test="contains(string(.),'primary')">
524 <xsl:value-of select="$nameserver1"/>
525 </xsl:when>
526 <xsl:when test="contains(string(.),'secondary')">
527 <xsl:value-of select="$nameserver2"/>
528 </xsl:when>
529 <xsl:when test="contains(string(.),'192.168.1.1')">
530 <xsl:value-of select="$ip"/>
531 </xsl:when>
532 <xsl:when test="contains(string(.),'HOSTNAME')">
533 <xsl:value-of select="$hostname"/>
534 <xsl:text>.</xsl:text>
535 <xsl:value-of select="$domain"/>
536 </xsl:when>
537 <xsl:when test="contains(string(.),'alias')">
538 <xsl:value-of select="$hostname"/>
539 </xsl:when>
540 <xsl:when test="contains(string(.),'&lt;lfs&gt;')">
541 <xsl:value-of select="$hostname"/>
542 </xsl:when>
543 <xsl:otherwise>
544 <xsl:text>**EDITME</xsl:text>
545 <xsl:apply-templates/>
546 <xsl:text>EDITME**</xsl:text>
547 </xsl:otherwise>
548 </xsl:choose>
549 </xsl:template>
550
551 <xsl:template match="literal">
552 <xsl:choose>
553 <xsl:when test="contains(string(),'ONBOOT')">
554 <xsl:call-template name="outputnet">
555 <xsl:with-param name="netstring" select="string()"/>
556 </xsl:call-template>
557 </xsl:when>
558 <xsl:otherwise>
559 <xsl:apply-templates/>
560 </xsl:otherwise>
561 </xsl:choose>
562 </xsl:template>
563
564 <xsl:template name="outputnet">
565 <xsl:param name="netstring" select="''"/>
566 <!-- We suppose that book example has the following values:
567 - interface: eth0
568 - ip: 192.168.1.1
569 - gateway: 192.168.1.2
570 - prefix: 24
571 - broadcast: 192.168.1.255
572 Change below if book changes -->
573 <xsl:choose>
574 <xsl:when test="contains($netstring,'eth0')">
575 <xsl:call-template name="outputnet">
576 <xsl:with-param name="netstring"
577 select="substring-before($netstring,'eth0')"/>
578 </xsl:call-template>
579 <xsl:value-of select="$interface"/>
580 <xsl:call-template name="outputnet">
581 <xsl:with-param name="netstring"
582 select="substring-after($netstring,'eth0')"/>
583 </xsl:call-template>
584 </xsl:when>
585 <xsl:when test="contains($netstring,'192.168.1.1')">
586 <xsl:call-template name="outputnet">
587 <xsl:with-param name="netstring"
588 select="substring-before($netstring,'192.168.1.1')"/>
589 </xsl:call-template>
590 <xsl:value-of select="$ip"/>
591 <xsl:call-template name="outputnet">
592 <xsl:with-param name="netstring"
593 select="substring-after($netstring,'192.168.1.1')"/>
594 </xsl:call-template>
595 </xsl:when>
596 <!-- must test this before the following, because 192.168.1.255 contains
597 192.168.1.2! -->
598 <xsl:when test="contains($netstring,'192.168.1.255')">
599 <xsl:call-template name="outputnet">
600 <xsl:with-param name="netstring"
601 select="substring-before($netstring,'192.168.1.255')"/>
602 </xsl:call-template>
603 <xsl:value-of select="$broadcast"/>
604 <xsl:call-template name="outputnet">
605 <xsl:with-param name="netstring"
606 select="substring-after($netstring,'192.168.1.255')"/>
607 </xsl:call-template>
608 </xsl:when>
609 <xsl:when test="contains($netstring,'192.168.1.2')">
610 <xsl:call-template name="outputnet">
611 <xsl:with-param name="netstring"
612 select="substring-before($netstring,'192.168.1.2')"/>
613 </xsl:call-template>
614 <xsl:value-of select="$gateway"/>
615 <xsl:call-template name="outputnet">
616 <xsl:with-param name="netstring"
617 select="substring-after($netstring,'192.168.1.2')"/>
618 </xsl:call-template>
619 </xsl:when>
620 <xsl:when test="contains($netstring,'24')">
621 <xsl:call-template name="outputnet">
622 <xsl:with-param name="netstring"
623 select="substring-before($netstring,'24')"/>
624 </xsl:call-template>
625 <xsl:value-of select="$prefix"/>
626 <xsl:call-template name="outputnet">
627 <xsl:with-param name="netstring"
628 select="substring-after($netstring,'24')"/>
629 </xsl:call-template>
630 </xsl:when>
631 <xsl:otherwise>
632 <xsl:value-of select="$netstring"/>
633 </xsl:otherwise>
634 </xsl:choose>
635 </xsl:template>
636
637 <xsl:template name="outputpkgdest">
638 <xsl:param name="outputstring" select="foo"/>
639 <xsl:choose>
640 <xsl:when test="contains($outputstring,'make ')">
641 <xsl:choose>
642 <xsl:when test="not(starts-with($outputstring,'make'))">
643 <xsl:call-template name="outputpkgdest">
644 <xsl:with-param name="outputstring"
645 select="substring-before($outputstring,'make')"/>
646 </xsl:call-template>
647 <xsl:call-template name="outputpkgdest">
648 <xsl:with-param
649 name="outputstring"
650 select="substring-after($outputstring,
651 substring-before($outputstring,'make'))"/>
652 </xsl:call-template>
653 </xsl:when>
654 <xsl:otherwise>
655 <xsl:choose>
656<!-- special cases (no DESTDIR) here -->
657 <xsl:when test="ancestor::sect1[@id='ch-system-glibc']">
658 <xsl:text>make install_root=$PKG_DEST -j1</xsl:text>
659 <xsl:value-of
660 select="substring-before(substring-after(string(),'make'),
661 'install')"/>
662 <xsl:text>install&#xA;</xsl:text>
663 </xsl:when>
664 <xsl:when test="ancestor::sect1[@id='ch-system-bzip2']">
665 <xsl:text>make PREFIX=$PKG_DEST/usr install&#xA;</xsl:text>
666 </xsl:when>
667 <xsl:when test="ancestor::sect1[@id='ch-system-sysklogd']">
668 <xsl:text>make BINDIR=$PKG_DEST/sbin prefix=$PKG_DEST install&#xA;</xsl:text>
669 </xsl:when>
670 <xsl:when test="ancestor::sect1[@id='ch-system-iproute2']">
671 <xsl:text>make DESTDIR=$PKG_DEST DOCDIR=</xsl:text>
672 <xsl:value-of
673 select="substring-before(substring-after(string(),'DOCDIR='),
674 'install')"/>
675 <xsl:text>install&#xA;</xsl:text>
676 </xsl:when>
677 <xsl:when test="ancestor::sect1[@id='ch-system-sysvinit']">
678 <xsl:text>make ROOT=$PKG_DEST</xsl:text>
679 <xsl:value-of
680 select="substring-before(substring-after(string(),'make'),
681 'install')"/>
682 <xsl:text>install&#xA;</xsl:text>
683 </xsl:when>
684 <xsl:when test="ancestor::sect1[@id='ch-bootable-kernel']">
685 <xsl:text>make INSTALL_MOD_PATH=$PKG_DEST</xsl:text>
686 <xsl:value-of
687 select="substring-before(substring-after(string(),'make'),
688 'install')"/>
689 <xsl:text>install&#xA;</xsl:text>
690 </xsl:when>
691 <xsl:when test="ancestor::sect1[@id='ch-system-attr']">
692 <xsl:text>DIST_ROOT=$PKG_DEST make</xsl:text>
693 <xsl:call-template name="outputpkgdest">
694 <xsl:with-param name="outputstring"
695 select="substring-after($outputstring,'make')"/>
696 </xsl:call-template>
697 </xsl:when>
698 <xsl:otherwise>
699 <xsl:text>make DESTDIR=$PKG_DEST</xsl:text>
700 <xsl:call-template name="outputpkgdest">
701 <xsl:with-param
702 name="outputstring"
703 select="substring-after($outputstring,'make')"/>
704 </xsl:call-template>
705 </xsl:otherwise>
706 </xsl:choose>
707 </xsl:otherwise>
708 </xsl:choose>
709 </xsl:when>
710 <xsl:otherwise> <!-- no make in this string -->
711 <xsl:choose>
712 <xsl:when test="contains($outputstring,'&gt;/') and
713 not(contains(substring-before($outputstring,'&gt;/'),' /'))">
714 <xsl:value-of select="substring-before($outputstring,'&gt;/')"/>
715 <xsl:text>&gt;$PKG_DEST/</xsl:text>
716 <xsl:call-template name="outputpkgdest">
717 <xsl:with-param name="outputstring" select="substring-after($outputstring,'&gt;/')"/>
718 </xsl:call-template>
719 </xsl:when>
720 <xsl:when test="contains($outputstring,' /')">
721 <xsl:value-of select="substring-before($outputstring,' /')"/>
722 <xsl:text> $PKG_DEST/</xsl:text>
723 <xsl:call-template name="outputpkgdest">
724 <xsl:with-param name="outputstring" select="substring-after($outputstring,' /')"/>
725 </xsl:call-template>
726 </xsl:when>
727 <xsl:otherwise>
728 <xsl:value-of select="$outputstring"/>
729 <xsl:text>&#xA;</xsl:text>
730 </xsl:otherwise>
731 </xsl:choose>
732 </xsl:otherwise>
733 </xsl:choose>
734 </xsl:template>
735</xsl:stylesheet>
Note: See TracBrowser for help on using the repository browser.