source: LFS/lfs.xsl@ a131250

ablfs-more legacy trunk
Last change on this file since a131250 was a131250, checked in by Pierre Labastie <pierre@…>, 5 years ago

Generate chapter 4 scriptlets

This is a major change for LFS. We won't be using the makefile for
the final preparations, but we'll extract the book instructions and
use them (the "use part not in this commit).
Since getting figures for those scriptlets is not important, and we
cannot use start and end scripts, which need already set up user and
dirs, do not use them
  • Property mode set to 100644
File size: 48.4 KB
Line 
1<?xml version="1.0" encoding="ISO-8859-1"?>
2
3<!-- $Id$ -->
4
5<xsl:stylesheet
6 xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
7 xmlns:exsl="http://exslt.org/common"
8 extension-element-prefixes="exsl"
9 version="1.0">
10
11<!-- Parameters -->
12
13 <!-- which revision attribute to include: can only be sysv or systemd,
14 but we leave checking to the caller-->
15 <xsl:param name="revision" select="'sysv'"/>
16
17 <!-- use package management ?
18 n = no, original behavior
19 y = yes, add PKG_DEST to scripts in install commands of chapter06-08
20 -->
21 <xsl:param name="pkgmngt" select="'n'"/>
22
23 <!-- Package management with "porg style" ?
24 n = no, same as pkgmngt description above
25 y = yes, wrap install commands of chapter06-08 into a bash function.
26 note that pkgmngt must be 'y' in this case
27 -->
28 <xsl:param name="wrap-install" select='"n"'/>
29
30 <!-- Run test suites?
31 0 = none
32 1 = only chapter06 critical testsuites
33 2 = all chapter06 testsuites
34 3 = all chapter05 and chapter06 testsuites
35 -->
36 <xsl:param name="testsuite" select="1"/>
37
38 <!-- Bomb on test suites failures?
39 n = no, I want to build the full system and review the logs
40 y = yes, bomb at the first test suite failure to can review the build dir
41 -->
42 <xsl:param name="bomb-testsuite" select="'n'"/>
43
44 <!-- Install non wide character ncurses 5? -->
45 <xsl:param name="ncurses5" select="'n'"/>
46
47 <!-- Should we strip excutables and libraries? -->
48 <xsl:param name='strip' select="'n'"/>
49
50 <!-- Should we remove .la files after chapter 5 and chapter 6? -->
51 <xsl:param name='del-la-files' select="'y'"/>
52
53 <!-- Time zone -->
54 <xsl:param name="timezone" select="'GMT'"/>
55
56 <!-- Page size -->
57 <xsl:param name="page" select="'letter'"/>
58
59 <!-- Locale settings -->
60 <xsl:param name="lang" select="'C'"/>
61
62 <!-- Install the whole set of locales -->
63 <xsl:param name='full-locale' select='"n"'/>
64
65 <!-- Hostname -->
66 <xsl:param name='hostname' select='"HOSTNAME"'/>
67
68 <!-- Network parameters: interface, ip, gateway, prefix, broadcast, domain
69 and nameservers -->
70 <xsl:param name='interface' select="'eth0'"/>
71 <xsl:param name='ip' select='"10.0.2.9"'/>
72 <xsl:param name='gateway' select='"10.0.2.2"'/>
73 <xsl:param name='prefix' select='24'/>
74 <xsl:param name='broadcast' select='"10.0.2.255"'/>
75 <xsl:param name='domain' select='"lfs.org"'/>
76 <xsl:param name='nameserver1' select='"10.0.2.3"'/>
77 <xsl:param name='nameserver2' select='"8.8.8.8"'/>
78
79 <!-- Console parameters: font, fontmap, unicode (y/n), keymap, local (y:
80 hardware clock set to local time/n:hardware clock set to UTC)
81 and log-level -->
82 <xsl:param name='font' select="'lat0-16'"/>
83 <xsl:param name='keymap' select="'us'"/>
84 <xsl:param name='local' select="'n'"/>
85 <xsl:param name='log-level' select="'4'"/>
86
87 <!-- The scripts root is needed for printing disk usage -->
88 <xsl:param name='script-root' select="'jhalfs'"/>
89
90<!-- End parameters -->
91
92 <xsl:template match="/">
93 <xsl:apply-templates select="//sect1[not(@revision) or
94 @revision=$revision]"/>
95 </xsl:template>
96
97 <xsl:template match="sect1">
98<!-- Since this xsl:if tag encloses the whole template, it would
99 be much better to transpose this condition to the select part
100 of the "calling" apply-template. But that would change the numbering,
101 so that it would be difficult to compare to previous versions. So for
102 version 2.4, let us keep this -->
103 <xsl:if test="(../@id='chapter-temporary-tools' or
104 ../@id='chapter-final-preps' or
105 ../@id='chapter-building-system' or
106 ../@id='chapter-bootscripts' or
107 ../@id='chapter-config' or
108 ../@id='chapter-bootable') and
109 (sect2[not(@revision) or @revision=$revision]//..|.)/
110 screen[(not(@role) or @role != 'nodump') and
111 (not(@revision) or @revision=$revision)]/
112 userinput[not(starts-with(string(),'chroot'))]">
113<!-- The last condition is a hack to allow previous versions of the
114 book where the chroot commands did not have role="nodump".
115 It only works if the chroot command is the only one on the page -->
116 <!-- The dirs names -->
117 <xsl:variable name="pi-dir" select="../processing-instruction('dbhtml')"/>
118 <xsl:variable name="pi-dir-value" select="substring-after($pi-dir,'dir=')"/>
119 <xsl:variable name="quote-dir" select="substring($pi-dir-value,1,1)"/>
120 <xsl:variable name="dirname" select="substring-before(substring($pi-dir-value,2),$quote-dir)"/>
121 <!-- The file names -->
122 <xsl:variable name="pi-file" select="processing-instruction('dbhtml')"/>
123 <xsl:variable name="pi-file-value" select="substring-after($pi-file,'filename=')"/>
124 <xsl:variable name="filename" select="substring-before(substring($pi-file-value,2),'.html')"/>
125 <!-- The build order -->
126 <xsl:variable name="position" select="position()"/>
127 <xsl:variable name="order">
128 <xsl:choose>
129 <xsl:when test="string-length($position) = 1">
130 <xsl:text>00</xsl:text>
131 <xsl:value-of select="$position"/>
132 </xsl:when>
133 <xsl:when test="string-length($position) = 2">
134 <xsl:text>0</xsl:text>
135 <xsl:value-of select="$position"/>
136 </xsl:when>
137 <xsl:otherwise>
138 <xsl:value-of select="$position"/>
139 </xsl:otherwise>
140 </xsl:choose>
141 </xsl:variable>
142 <!-- Inclusion of package manager scriptlets -->
143 <xsl:if test="@id='ch-tools-stripping' and $pkgmngt='y'">
144 <xsl:apply-templates
145 select="document('packageManager.xml')//sect1[contains(@id,'ch-tools')]"
146 mode="pkgmngt">
147 <xsl:with-param name="order" select="$order"/>
148 <xsl:with-param name="dirname" select="$dirname"/>
149 </xsl:apply-templates>
150 </xsl:if>
151 <xsl:if test="@id='ch-system-strippingagain' and $pkgmngt='y'">
152 <xsl:apply-templates
153 select="document('packageManager.xml')//sect1[contains(@id,'ch-system')]"
154 mode="pkgmngt">
155 <xsl:with-param name="order" select="$order"/>
156 <xsl:with-param name="dirname" select="$dirname"/>
157 </xsl:apply-templates>
158 </xsl:if>
159 <!-- Creating dirs and files -->
160 <exsl:document href="{$dirname}/{$order}-{$filename}" method="text">
161 <xsl:choose>
162 <xsl:when test="@id='ch-system-creatingdirs' or
163 @id='ch-system-createfiles' or
164 @id='ch-system-strippingagain'">
165 <xsl:text>#!/tools/bin/bash&#xA;set +h&#xA;</xsl:text>
166 </xsl:when>
167 <xsl:otherwise>
168 <xsl:text>#!/bin/bash&#xA;set +h&#xA;</xsl:text>
169 </xsl:otherwise>
170 </xsl:choose>
171 <xsl:if test="not(@id='ch-tools-stripping') and
172 not(@id='ch-system-strippingagain')">
173 <xsl:text>set -e&#xA;</xsl:text>
174 </xsl:if>
175 <xsl:text>&#xA;</xsl:text>
176 <xsl:if test="ancestor::chapter/@id != 'chapter-final-preps'">
177 <xsl:call-template name="start-script">
178 <xsl:with-param name="order" select="$order"/>
179 </xsl:call-template>
180 </xsl:if>
181 <xsl:apply-templates select="sect2[not(@revision) or
182 @revision=$revision] |
183 screen[(not(@role) or
184 @role!='nodump') and
185 (not(@revision) or
186 @revision=$revision)]/userinput"/>
187 <xsl:if test="@id='ch-system-creatingdirs' and $pkgmngt='y'">
188 <xsl:apply-templates
189 select="document('packageManager.xml')//sect1[
190 @id='ch-pkgmngt-creatingdirs'
191 ]//userinput"
192 mode="pkgmngt"/>
193 </xsl:if>
194 <xsl:if test="@id='ch-system-createfiles' and $pkgmngt='y'">
195 <xsl:apply-templates
196 select="document('packageManager.xml')//sect1[
197 @id='ch-pkgmngt-createfiles'
198 ]//userinput"
199 mode="pkgmngt"/>
200 </xsl:if>
201 <xsl:if test="ancestor::chapter/@id != 'chapter-final-preps'">
202 <xsl:text>echo -e "\n\nTotalseconds: $SECONDS\n"&#xA;</xsl:text>
203 <xsl:call-template name="end-script"/>
204 </xsl:if>
205 <xsl:text>exit&#xA;</xsl:text>
206 </exsl:document>
207 </xsl:if>
208 </xsl:template>
209
210 <xsl:template match="sect2">
211 <xsl:apply-templates
212 select=".//screen[(not(@role) or
213 @role != 'nodump') and
214 (not(@revision) or
215 @revision=$revision)]/userinput[
216 @remap = 'pre' or
217 @remap = 'configure' or
218 @remap = 'make' or
219 @remap = 'test' and
220 not(current()/../@id='ch-tools-dejagnu') and
221 not(current()/../@id='ch-system-systemd')]"/>
222 <xsl:if
223 test="ancestor::chapter[@id != 'chapter-temporary-tools'] and
224 $pkgmngt = 'y' and
225 descendant::screen[not(@role) or
226 @role != 'nodump']/userinput[
227 @remap='install']">
228 <xsl:choose>
229 <xsl:when test="$wrap-install='y'">
230 <xsl:text>wrapInstall '
231</xsl:text>
232 </xsl:when>
233 <xsl:otherwise>
234<!-- We cannot know which directory(ies) are needed by the package. Create a
235 reasonable bunch of them. Should be close to "Creating Directories".-->
236 <xsl:text>mkdir -pv $PKG_DEST/{bin,boot,etc,lib,sbin}
237mkdir -pv $PKG_DEST/usr/{bin,include,lib/pkgconfig,sbin}
238mkdir -pv $PKG_DEST/usr/share/{doc,info,bash-completion/completions}
239mkdir -pv $PKG_DEST/usr/share/man/man{1..8}
240case $(uname -m) in
241 x86_64) mkdir -v $PKG_DEST/lib64 ;;
242esac
243</xsl:text>
244 </xsl:otherwise>
245 </xsl:choose>
246 </xsl:if>
247 <xsl:apply-templates
248 select=".//screen[(not(@role) or
249 @role != 'nodump') and
250 (not(@revision) or
251 @revision=$revision)]/userinput[@remap = 'install']"/>
252 <xsl:if test="ancestor::chapter[@id != 'chapter-temporary-tools'] and
253 descendant::screen[not(@role) or
254 @role != 'nodump']/userinput[
255 @remap='install']">
256 <xsl:choose>
257 <xsl:when test="$pkgmngt='n'"/>
258 <xsl:when test="$wrap-install='y'">
259 <xsl:if test="../@id = 'ch-system-man-pages'">
260<!-- these files are provided by the shadow package -->
261 <xsl:text>rm -fv /usr/share/man/{man3/getspnam.3,man5/passwd.5}
262</xsl:text>
263 </xsl:if>
264<!-- nologin is installed by util-linux. remove it from shadow -->
265 <xsl:if test="../@id = 'ch-system-shadow'">
266 <xsl:text>rm -fv /usr/share/man/man8/nologin.8
267rm -fv /sbin/nologin
268</xsl:text>
269 </xsl:if>
270 <xsl:text>'
271PREV_SEC=${SECONDS}
272packInstall
273SECONDS=${PREV_SEC}
274</xsl:text>
275 </xsl:when>
276 <xsl:otherwise>
277 <xsl:if test="../@id = 'ch-system-man-pages'">
278<!-- these files are provided by the shadow package -->
279 <xsl:text>rm -fv $PKG_DEST/usr/share/man/{man3/getspnam.3,man5/passwd.5}
280</xsl:text>
281 </xsl:if>
282<!-- nologin is installed by util-linux. remove it from shadow -->
283 <xsl:if test="../@id = 'ch-system-shadow'">
284 <xsl:text>rm -fv $PKG_DEST/usr/share/man/man8/nologin.8
285rm -fv $PKG_DEST/sbin/nologin
286</xsl:text>
287 </xsl:if>
288<!-- remove empty directories -->
289 <xsl:text>for dir in $PKG_DEST/usr/share/man/man{1..8} \
290 $PKG_DEST/usr/share/bash-completion{/completions,} \
291 $PKG_DEST/usr/share/{doc,info,man,} \
292 $PKG_DEST/usr/lib/pkgconfig \
293 $PKG_DEST/usr/{lib,bin,sbin,include} \
294 $PKG_DEST/{boot,etc,lib,bin,sbin}; do
295 [ -d "$dir" ] &amp;&amp; [ -z "$(ls $dir)" ] &amp;&amp; rmdir -v $dir
296done
297[ -d $PKG_DEST/lib64 ] &amp;&amp; [ -z "$(ls $PKG_DEST/lib64)" ] &amp;&amp;
298 rmdir -v $PKG_DEST/lib64
299PREV_SEC=${SECONDS}
300packInstall
301SECONDS=${PREV_SEC}
302rm -rf $PKG_DEST
303</xsl:text>
304 </xsl:otherwise>
305 </xsl:choose>
306 </xsl:if>
307 <xsl:if test="$testsuite='3' and
308 ../@id='ch-tools-glibc' and
309 @role='installation'">
310 <xsl:copy-of select="//userinput[@remap='locale-test']"/>
311 <xsl:text>&#xA;</xsl:text>
312 </xsl:if>
313 <xsl:if test="../@id='ch-system-glibc' and @role='installation'">
314 <xsl:choose>
315 <xsl:when test="$full-locale='y'">
316 <xsl:copy-of select="//userinput[@remap='locale-full']"/>
317 <xsl:text>&#xA;</xsl:text>
318 </xsl:when>
319 <xsl:otherwise>
320 <xsl:copy-of select="//userinput[@remap='locale-test']"/>
321 <xsl:text>&#xA;</xsl:text>
322 <xsl:if test="not(contains(string(//userinput[@remap='locale-test']),$lang)) and $lang!='C' and $lang!='POSIX'">
323 <xsl:text>if LOCALE=`grep "</xsl:text>
324 <xsl:value-of select="$lang"/>
325 <xsl:text>/" $PKGDIR/localedata/SUPPORTED`; then
326 CHARMAP=`echo $LOCALE | sed 's,[^/]*/\([^ ]*\) [\],\1,'`
327 INPUT=`echo $LOCALE | sed 's,[/.].*,,'`
328 LOCALE=`echo $LOCALE | sed 's,/.*,,'`
329 localedef -i $INPUT -f $CHARMAP $LOCALE
330fi
331</xsl:text>
332 </xsl:if>
333 </xsl:otherwise>
334 </xsl:choose>
335 </xsl:if>
336 <xsl:apply-templates
337 select=".//screen[
338 (not(@role) or
339 @role != 'nodump') and
340 (not(@revision) or
341 @revision=$revision)
342 ]/userinput[
343 not(@remap) or
344 @remap='adjust' or
345 @remap='test' and current()/../@id='ch-tools-dejagnu' or
346 @remap='test' and current()/../@id='ch-system-systemd'
347 ]"/>
348 <xsl:if test="../@id='ch-system-ncurses' and $ncurses5='y'">
349 <xsl:apply-templates select=".//screen[@role='nodump']"/>
350 </xsl:if>
351 </xsl:template>
352
353 <xsl:template match="sect1" mode="pkgmngt">
354 <xsl:param name="dirname" select="'chapter05'"/>
355 <!-- The build order -->
356 <xsl:param name="order" select="'062'"/>
357<!-- The file names -->
358 <xsl:variable name="pi-file" select="processing-instruction('dbhtml')"/>
359 <xsl:variable name="pi-file-value" select="substring-after($pi-file,'filename=')"/>
360 <xsl:variable name="filename" select="substring-before(substring($pi-file-value,2),'.html')"/>
361 <!-- Creating dirs and files -->
362 <xsl:if test="count(descendant::screen/userinput) &gt; 0 and
363 count(descendant::screen/userinput) &gt;
364 count(descendant::screen[@role='nodump'])">
365 <exsl:document href="{$dirname}/{$order}-{position()}-{$filename}"
366 method="text">
367 <xsl:text>#!/bin/bash
368set +h
369set -e
370</xsl:text>
371 <xsl:call-template name="start-script">
372 <xsl:with-param name="order" select="concat($order,'-',position())"/>
373 </xsl:call-template>
374 <xsl:apply-templates
375 select=".//screen[not(@role) or
376 @role != 'nodump']/userinput[@remap != 'adjust']"
377 mode="pkgmngt"/>
378 <xsl:if test="$dirname = 'chapter06'">
379 <xsl:text>PREV_SEC=${SECONDS}
380packInstall
381SECONDS=${PREV_SEC}
382rm -rf "$PKG_DEST"
383</xsl:text>
384 </xsl:if>
385 <xsl:apply-templates
386 select=".//screen[not(@role) or
387 @role != 'nodump'
388 ]/userinput[not(@remap) or
389 @remap='adjust'
390 ]"
391 mode="pkgmngt"/>
392 <xsl:text>
393echo -e "\n\nTotalseconds: $SECONDS\n"
394</xsl:text>
395 <xsl:call-template name="end-script"/>
396 <xsl:text>exit
397</xsl:text>
398 </exsl:document>
399 </xsl:if>
400 </xsl:template>
401
402 <xsl:template match="userinput" mode="pkgmngt">
403 <xsl:apply-templates/>
404 <xsl:text>&#xA;</xsl:text>
405 </xsl:template>
406
407 <xsl:template match="userinput">
408 <xsl:choose>
409 <!-- Copying the kernel config file -->
410 <xsl:when test="string() = 'make mrproper'">
411 <xsl:text>make mrproper&#xA;</xsl:text>
412 <xsl:if test="ancestor::sect1[@id='ch-bootable-kernel']">
413 <xsl:text>cp -v ../kernel-config .config&#xA;</xsl:text>
414 </xsl:if>
415 </xsl:when>
416<!-- test instructions -->
417 <xsl:when test="@remap = 'test'">
418 <xsl:call-template name="comment-test">
419 <xsl:with-param name="instructions" select="string()"/>
420 </xsl:call-template>
421 </xsl:when>
422<!-- End of test instructions -->
423<!-- If the instructions contain "strip ", it may mean they contain also .la
424 file removal (and possibly other clean up). We therefore call a template
425 to comment them out appropriately and also to not stop if stripping
426 fails. -->
427 <xsl:when test="contains(string(),'strip ') or
428 contains(string(),'\*.la')">
429 <xsl:call-template name="comment-strip">
430 <xsl:with-param name="instructions" select="string()"/>
431 </xsl:call-template>
432 </xsl:when>
433<!-- Package management -->
434<!-- Add $PKG_DEST to installation commands -->
435 <xsl:when test="@remap='install' and
436 not(ancestor::chapter[
437 @id='chapter-temporary-tools'
438 ])">
439 <xsl:choose>
440 <xsl:when test="$pkgmngt='n'">
441 <xsl:choose>
442 <xsl:when test="contains(string(),'firmware,udev')">
443 <xsl:text>if [[ ! -d /lib/udev/devices ]] ; then&#xA;</xsl:text>
444 <xsl:apply-templates/>
445 <xsl:text>&#xA;fi&#xA;</xsl:text>
446 </xsl:when>
447 <xsl:otherwise>
448 <xsl:apply-templates/>
449 <xsl:text>&#xA;</xsl:text>
450 </xsl:otherwise>
451 </xsl:choose>
452 </xsl:when>
453 <xsl:when test="$wrap-install='y'">
454 <xsl:choose>
455 <xsl:when test="./literal">
456 <xsl:call-template name="output-wrap">
457 <xsl:with-param name="commands" select="text()[1]"/>
458 </xsl:call-template>
459 <xsl:apply-templates select="literal"/>
460 <xsl:call-template name="output-wrap">
461 <xsl:with-param name="commands" select="text()[2]"/>
462 </xsl:call-template>
463 </xsl:when>
464 <xsl:otherwise>
465 <xsl:call-template name="output-wrap">
466 <xsl:with-param name="commands" select="string()"/>
467 </xsl:call-template>
468 </xsl:otherwise>
469 </xsl:choose>
470 <xsl:text>&#xA;</xsl:text>
471 </xsl:when>
472 <xsl:otherwise><!--pkgmngt = 'y' and wrap-install='n'-->
473 <xsl:choose>
474 <xsl:when test="./literal">
475 <xsl:call-template name="outputpkgdest">
476 <xsl:with-param name="outputstring" select="text()[1]"/>
477 </xsl:call-template>
478 <xsl:apply-templates select="literal"/>
479 <xsl:call-template name="outputpkgdest">
480 <xsl:with-param name="outputstring" select="text()[2]"/>
481 </xsl:call-template>
482 </xsl:when>
483 <xsl:otherwise>
484 <xsl:call-template name="outputpkgdest">
485 <xsl:with-param name="outputstring" select="string()"/>
486 </xsl:call-template>
487 </xsl:otherwise>
488 </xsl:choose>
489 <xsl:text>&#xA;</xsl:text>
490 </xsl:otherwise>
491 </xsl:choose>
492 </xsl:when> <!-- @remap='install' -->
493 <!-- if package management, we should make an independant package for
494 tzdata. -->
495 <xsl:when test="contains(string(),'tzdata') and $pkgmngt='y'">
496 <xsl:text>
497OLD_PKG_DEST="$PKG_DEST"
498OLD_PKGDIR=$PKGDIR
499PKG_DEST=$(dirname $OLD_PKG_DEST)/001-tzdata
500PKGDIR=$(dirname $PKGDIR)/tzdata-</xsl:text>
501 <xsl:copy-of select="substring-before(
502 substring-after(string(),'tzdata'),
503 '.tar')"/>
504 <xsl:text>
505</xsl:text>
506 <xsl:choose>
507 <xsl:when test="$wrap-install='n'">
508 <xsl:copy-of select="substring-before(string(),'ZONEINFO=')"/>
509 <xsl:text>ZONEINFO=$PKG_DEST</xsl:text>
510 <xsl:copy-of select="substring-after(string(),'ZONEINFO=')"/>
511 <xsl:text>
512PREV_SEC=${SECONDS}
513packInstall
514SECONDS=${PREV_SEC}
515rm -rf $PKG_DEST
516</xsl:text>
517 </xsl:when>
518 <xsl:otherwise><!-- wrap-install='y' -->
519 <xsl:copy-of select="substring-before(string(),'ZONEINFO=')"/>
520 <xsl:text>
521wrapInstall '
522ZONEINFO=</xsl:text>
523 <xsl:copy-of select="substring-after(string(),'ZONEINFO=')"/>
524 <xsl:text>'
525PREV_SEC=${SECONDS}
526packInstall
527SECONDS=${PREV_SEC}
528</xsl:text>
529 </xsl:otherwise>
530 </xsl:choose>
531 <xsl:text>
532PKG_DEST=$OLD_PKG_DEST
533unset OLD_PKG_DEST
534PKGDIR=$OLD_PKGDIR
535unset OLD_PKGDIR
536</xsl:text>
537 </xsl:when><!-- addition for tzdata + package management -->
538 <!-- End addition for package management -->
539 <!-- The rest of commands -->
540 <xsl:otherwise>
541 <xsl:apply-templates/>
542 <xsl:text>&#xA;</xsl:text>
543 </xsl:otherwise>
544 </xsl:choose>
545 </xsl:template>
546
547 <xsl:template match="replaceable">
548 <xsl:choose>
549 <xsl:when test="ancestor::sect1[@id='ch-system-glibc']">
550 <xsl:value-of select="$timezone"/>
551 </xsl:when>
552 <xsl:when test="ancestor::sect1[@id='ch-system-groff']">
553 <xsl:value-of select="$page"/>
554 </xsl:when>
555 <xsl:when test="contains(string(.),'&lt;ll&gt;_&lt;CC&gt;')">
556 <xsl:value-of select="$lang"/>
557 </xsl:when>
558 <xsl:when test="contains(string(.),'Domain')">
559 <xsl:value-of select="$domain"/>
560 </xsl:when>
561 <xsl:when test="contains(string(.),'primary')">
562 <xsl:value-of select="$nameserver1"/>
563 </xsl:when>
564 <xsl:when test="contains(string(.),'secondary')">
565 <xsl:value-of select="$nameserver2"/>
566 </xsl:when>
567 <xsl:when test="contains(string(.),'192.168.1.1')">
568 <xsl:value-of select="$ip"/>
569 </xsl:when>
570 <xsl:when test="contains(string(.),'192.168.0.2')">
571 <xsl:value-of select="$ip"/>
572 </xsl:when>
573 <xsl:when test="contains(string(.),'eth0')">
574 <xsl:value-of select="$interface"/>
575 </xsl:when>
576<!-- Only adapted to LFS-20170310 and later -->
577 <xsl:when test="contains(string(.),'HOSTNAME')">
578 <xsl:value-of select="$hostname"/>
579 </xsl:when>
580 <xsl:when test="contains(string(.),'FQDN')">
581 <xsl:value-of select="$hostname"/>
582 <xsl:text>.</xsl:text>
583 <xsl:value-of select="$domain"/>
584 </xsl:when>
585 <xsl:when test="contains(string(.),'alias')"/>
586 <xsl:when test="contains(string(.),'&lt;lfs&gt;')">
587 <xsl:value-of select="$hostname"/>
588 </xsl:when>
589 <xsl:otherwise>
590 <xsl:text>**EDITME</xsl:text>
591 <xsl:apply-templates/>
592 <xsl:text>EDITME**</xsl:text>
593 </xsl:otherwise>
594 </xsl:choose>
595 </xsl:template>
596
597 <xsl:template match="literal">
598 <xsl:choose>
599 <xsl:when test="contains(string(),'ONBOOT')">
600 <xsl:call-template name="outputnet">
601 <xsl:with-param name="netstring" select="string()"/>
602 </xsl:call-template>
603 </xsl:when>
604 <xsl:when test="contains(string(),'[Match]')">
605 <xsl:call-template name="outputsysdnet">
606 <xsl:with-param name="netstring" select="string()"/>
607 </xsl:call-template>
608 </xsl:when>
609 <xsl:when test="contains(string(),'0.0 0 0.0')">
610 <xsl:copy-of select="substring-before(string(),'LOCAL')"/>
611 <xsl:if test="$local='y'"><xsl:text>LOCAL</xsl:text></xsl:if>
612 <xsl:if test="$local='n'"><xsl:text>UTC</xsl:text></xsl:if>
613 </xsl:when>
614 <xsl:when test="contains(string(),'UTC=1')">
615 <xsl:copy-of select="substring-before(string(),'1')"/>
616 <xsl:if test="$local='y'"><xsl:text>0</xsl:text></xsl:if>
617 <xsl:if test="$local='n'"><xsl:text>1</xsl:text></xsl:if>
618 <xsl:copy-of select="substring-after(string(),'1')"/>
619 </xsl:when>
620 <xsl:when test="contains(string(),'bg_bds-')">
621 <xsl:call-template name="outputsysvconsole">
622 <xsl:with-param name="consolestring" select="string()"/>
623 </xsl:call-template>
624 </xsl:when>
625 <xsl:when test="contains(string(),'de-latin1')">
626 <xsl:call-template name="outputsysdconsole">
627 <xsl:with-param name="consolestring" select="string()"/>
628 </xsl:call-template>
629 </xsl:when>
630 <xsl:otherwise>
631 <xsl:apply-templates/>
632 </xsl:otherwise>
633 </xsl:choose>
634 </xsl:template>
635
636 <xsl:template name="outputnet">
637 <xsl:param name="netstring" select="''"/>
638 <!-- We suppose that book example has the following values:
639 - interface: eth0
640 - ip: 192.168.1.2
641 - gateway: 192.168.1.1
642 - prefix: 24
643 - broadcast: 192.168.1.255
644 Change below if book changes -->
645 <xsl:choose>
646 <xsl:when test="contains($netstring,'eth0')">
647 <xsl:call-template name="outputnet">
648 <xsl:with-param name="netstring"
649 select="substring-before($netstring,'eth0')"/>
650 </xsl:call-template>
651 <xsl:value-of select="$interface"/>
652 <xsl:call-template name="outputnet">
653 <xsl:with-param name="netstring"
654 select="substring-after($netstring,'eth0')"/>
655 </xsl:call-template>
656 </xsl:when>
657 <xsl:when test="contains($netstring,'192.168.1.1')">
658 <xsl:call-template name="outputnet">
659 <xsl:with-param name="netstring"
660 select="substring-before($netstring,'192.168.1.1')"/>
661 </xsl:call-template>
662 <xsl:value-of select="$gateway"/>
663 <xsl:call-template name="outputnet">
664 <xsl:with-param name="netstring"
665 select="substring-after($netstring,'192.168.1.1')"/>
666 </xsl:call-template>
667 </xsl:when>
668 <!-- must test this before the following, because 192.168.1.255 contains
669 192.168.1.2! -->
670 <xsl:when test="contains($netstring,'192.168.1.255')">
671 <xsl:call-template name="outputnet">
672 <xsl:with-param name="netstring"
673 select="substring-before($netstring,'192.168.1.255')"/>
674 </xsl:call-template>
675 <xsl:value-of select="$broadcast"/>
676 <xsl:call-template name="outputnet">
677 <xsl:with-param name="netstring"
678 select="substring-after($netstring,'192.168.1.255')"/>
679 </xsl:call-template>
680 </xsl:when>
681 <xsl:when test="contains($netstring,'192.168.1.2')">
682 <xsl:call-template name="outputnet">
683 <xsl:with-param name="netstring"
684 select="substring-before($netstring,'192.168.1.2')"/>
685 </xsl:call-template>
686 <xsl:value-of select="$ip"/>
687 <xsl:call-template name="outputnet">
688 <xsl:with-param name="netstring"
689 select="substring-after($netstring,'192.168.1.2')"/>
690 </xsl:call-template>
691 </xsl:when>
692 <xsl:when test="contains($netstring,'24')">
693 <xsl:call-template name="outputnet">
694 <xsl:with-param name="netstring"
695 select="substring-before($netstring,'24')"/>
696 </xsl:call-template>
697 <xsl:value-of select="$prefix"/>
698 <xsl:call-template name="outputnet">
699 <xsl:with-param name="netstring"
700 select="substring-after($netstring,'24')"/>
701 </xsl:call-template>
702 </xsl:when>
703 <xsl:otherwise>
704 <xsl:value-of select="$netstring"/>
705 </xsl:otherwise>
706 </xsl:choose>
707 </xsl:template>
708
709 <xsl:template name="outputsysdnet">
710 <xsl:param name="netstring" select="''"/>
711 <!-- We suppose that book example has the following values:
712 - interface: <network-device-name>
713 - ip: 192.168.0.2
714 - gateway: 192.168.0.1
715 - prefix: 24
716 - DNS: 192.168.0.1
717 - Domain: <Your Domain Name>
718 and gateway comes before DNS. Change below if book changes -->
719 <xsl:choose>
720 <xsl:when test="contains($netstring,'&lt;network-device-name&gt;')">
721 <xsl:call-template name="outputsysdnet">
722 <xsl:with-param name="netstring"
723 select="substring-before($netstring,'&lt;network-device-name&gt;')"/>
724 </xsl:call-template>
725 <xsl:value-of select="$interface"/>
726 <xsl:call-template name="outputsysdnet">
727 <xsl:with-param name="netstring"
728 select="substring-after($netstring,'&lt;network-device-name&gt;')"/>
729 </xsl:call-template>
730 </xsl:when>
731 <xsl:when test="contains($netstring,'192.168.0.1') and
732 contains($netstring,'Gateway')">
733 <xsl:call-template name="outputsysdnet">
734 <xsl:with-param name="netstring"
735 select="substring-before($netstring,'192.168.0.1')"/>
736 </xsl:call-template>
737 <xsl:value-of select="$gateway"/>
738 <xsl:call-template name="outputsysdnet">
739 <xsl:with-param name="netstring"
740 select="substring-after($netstring,'192.168.0.1')"/>
741 </xsl:call-template>
742 </xsl:when>
743 <xsl:when test="contains($netstring,'192.168.0.1') and
744 not(contains($netstring,'Gateway'))">
745 <xsl:call-template name="outputsysdnet">
746 <xsl:with-param name="netstring"
747 select="substring-before($netstring,'192.168.0.1')"/>
748 </xsl:call-template>
749 <xsl:value-of select="$nameserver1"/>
750 <xsl:text>
751DNS=</xsl:text>
752 <xsl:value-of select="$nameserver2"/>
753 <xsl:call-template name="outputsysdnet">
754 <xsl:with-param name="netstring"
755 select="substring-after($netstring,'192.168.0.1')"/>
756 </xsl:call-template>
757 </xsl:when>
758 <xsl:when test="contains($netstring,'192.168.0.2')">
759 <xsl:call-template name="outputsysdnet">
760 <xsl:with-param name="netstring"
761 select="substring-before($netstring,'192.168.0.2')"/>
762 </xsl:call-template>
763 <xsl:value-of select="$ip"/>
764 <xsl:call-template name="outputsysdnet">
765 <xsl:with-param name="netstring"
766 select="substring-after($netstring,'192.168.0.2')"/>
767 </xsl:call-template>
768 </xsl:when>
769 <xsl:when test="contains($netstring,'24')">
770 <xsl:call-template name="outputsysdnet">
771 <xsl:with-param name="netstring"
772 select="substring-before($netstring,'24')"/>
773 </xsl:call-template>
774 <xsl:value-of select="$prefix"/>
775 <xsl:call-template name="outputsysdnet">
776 <xsl:with-param name="netstring"
777 select="substring-after($netstring,'24')"/>
778 </xsl:call-template>
779 </xsl:when>
780 <xsl:when test="contains($netstring,'&lt;Your Domain Name&gt;')">
781 <xsl:call-template name="outputsysdnet">
782 <xsl:with-param name="netstring"
783 select="substring-before($netstring,'&lt;Your Domain Name&gt;')"/>
784 </xsl:call-template>
785 <xsl:value-of select="$domain"/>
786 <xsl:call-template name="outputsysdnet">
787 <xsl:with-param name="netstring"
788 select="substring-after($netstring,'&lt;Your Domain Name&gt;')"/>
789 </xsl:call-template>
790 </xsl:when>
791 <xsl:otherwise>
792 <xsl:value-of select="$netstring"/>
793 </xsl:otherwise>
794 </xsl:choose>
795 </xsl:template>
796
797 <xsl:template name="outputsysvconsole">
798 <!-- We suppose that book example has the following values:
799 - KEYMAP: bg_bds-utf8
800 - FONT: LatArCyrHeb-16
801 Change below if book changes -->
802 <xsl:param name="consolestring" select="''"/>
803 <xsl:choose>
804 <xsl:when test="contains($consolestring,'bg_bds-utf8')">
805 <xsl:call-template name="outputsysvconsole">
806 <xsl:with-param
807 name="consolestring"
808 select="substring-before($consolestring,'bg_bds-utf8')"/>
809 </xsl:call-template>
810 <xsl:value-of select="$keymap"/>
811 <xsl:call-template name="outputsysvconsole">
812 <xsl:with-param
813 name="consolestring"
814 select="substring-after($consolestring,'bg_bds-utf8')"/>
815 </xsl:call-template>
816 </xsl:when>
817 <xsl:when test="contains($consolestring,'LatArCyrHeb-16')">
818 <xsl:call-template name="outputsysvconsole">
819 <xsl:with-param
820 name="consolestring"
821 select="substring-before($consolestring,'LatArCyrHeb-16')"/>
822 </xsl:call-template>
823 <xsl:value-of select="$font"/>
824 <xsl:text>"
825LOGLEVEL="</xsl:text>
826 <xsl:copy-of select="$log-level"/>
827 <xsl:call-template name="outputsysvconsole">
828 <xsl:with-param
829 name="consolestring"
830 select="substring-after($consolestring,'LatArCyrHeb-16')"/>
831 </xsl:call-template>
832 </xsl:when>
833 <xsl:otherwise>
834 <xsl:copy-of select="$consolestring"/>
835 </xsl:otherwise>
836 </xsl:choose>
837 </xsl:template>
838
839 <xsl:template name="outputsysdconsole">
840 <!-- We suppose that book example has the following values:
841 - KEYMAP: de-latin1
842 - FONT: Lat2-Terminus16
843 Change below if book changes -->
844 <xsl:param name="consolestring" select="''"/>
845 <xsl:choose>
846 <xsl:when test="contains($consolestring,'de-latin1')">
847 <xsl:call-template name="outputsysdconsole">
848 <xsl:with-param
849 name="consolestring"
850 select="substring-before($consolestring,'de-latin1')"/>
851 </xsl:call-template>
852 <xsl:value-of select="$keymap"/>
853 <xsl:call-template name="outputsysdconsole">
854 <xsl:with-param
855 name="consolestring"
856 select="substring-after($consolestring,'de-latin1')"/>
857 </xsl:call-template>
858 </xsl:when>
859 <xsl:when test="contains($consolestring,'Lat2-Terminus16')">
860 <xsl:call-template name="outputsysdconsole">
861 <xsl:with-param
862 name="consolestring"
863 select="substring-before($consolestring,'Lat2-Terminus16')"/>
864 </xsl:call-template>
865 <xsl:value-of select="$font"/>
866 <xsl:call-template name="outputsysdconsole">
867 <xsl:with-param
868 name="consolestring"
869 select="substring-after($consolestring,'Lat2-Terminus16')"/>
870 </xsl:call-template>
871 </xsl:when>
872 <xsl:otherwise>
873 <xsl:copy-of select="$consolestring"/>
874 </xsl:otherwise>
875 </xsl:choose>
876 </xsl:template>
877
878 <xsl:template name="outputpkgdest">
879 <xsl:param name="outputstring" select="foo"/>
880 <xsl:choose>
881 <xsl:when test="contains($outputstring,'make ')">
882 <xsl:choose>
883 <xsl:when test="not(starts-with($outputstring,'make'))">
884 <xsl:call-template name="outputpkgdest">
885 <xsl:with-param name="outputstring"
886 select="substring-before($outputstring,'make')"/>
887 </xsl:call-template>
888 <xsl:call-template name="outputpkgdest">
889 <xsl:with-param
890 name="outputstring"
891 select="substring-after($outputstring,
892 substring-before($outputstring,'make'))"/>
893 </xsl:call-template>
894 </xsl:when>
895 <xsl:otherwise>
896 <xsl:choose>
897<!-- special cases (no DESTDIR) here -->
898 <xsl:when test="ancestor::sect1[@id='ch-system-glibc']">
899 <xsl:text>make install_root=$PKG_DEST -j1</xsl:text>
900 <xsl:value-of
901 select="substring-before(substring-after(string(),'make'),
902 'install')"/>
903 <xsl:text>install&#xA;</xsl:text>
904 </xsl:when>
905 <xsl:when test="ancestor::sect1[@id='ch-system-bzip2']">
906 <xsl:text>make PREFIX=$PKG_DEST/usr install&#xA;</xsl:text>
907 </xsl:when>
908 <xsl:when test="ancestor::sect1[@id='ch-system-sysklogd']">
909 <xsl:text>make BINDIR=$PKG_DEST/sbin prefix=$PKG_DEST install&#xA;</xsl:text>
910 </xsl:when>
911 <xsl:when test="ancestor::sect1[@id='ch-system-iproute2']">
912 <xsl:text>make DESTDIR=$PKG_DEST DOCDIR=</xsl:text>
913 <xsl:value-of
914 select="substring-before(substring-after(string(),'DOCDIR='),
915 'install')"/>
916 <xsl:text>install&#xA;</xsl:text>
917 </xsl:when>
918 <xsl:when test="ancestor::sect1[@id='ch-system-sysvinit']">
919 <xsl:text>make ROOT=$PKG_DEST</xsl:text>
920 <xsl:value-of
921 select="substring-before(substring-after(string(),'make'),
922 'install')"/>
923 <xsl:text>install&#xA;</xsl:text>
924 </xsl:when>
925 <xsl:when test="ancestor::sect1[@id='ch-bootable-kernel']">
926 <xsl:text>make INSTALL_MOD_PATH=$PKG_DEST</xsl:text>
927 <xsl:value-of
928 select="substring-before(substring-after(string(),'make'),
929 'install')"/>
930 <xsl:text>install&#xA;</xsl:text>
931 </xsl:when>
932 <xsl:otherwise>
933 <xsl:text>make DESTDIR=$PKG_DEST</xsl:text>
934 <xsl:call-template name="outputpkgdest">
935 <xsl:with-param
936 name="outputstring"
937 select="substring-after($outputstring,'make')"/>
938 </xsl:call-template>
939 </xsl:otherwise>
940 </xsl:choose>
941 </xsl:otherwise>
942 </xsl:choose>
943 </xsl:when>
944 <xsl:when test="contains($outputstring,'ninja install')">
945 <xsl:choose>
946 <xsl:when test="not(starts-with($outputstring,'ninja install'))">
947 <xsl:call-template name="outputpkgdest">
948 <xsl:with-param name="outputstring"
949 select="substring-before($outputstring,'ninja install')"/>
950 </xsl:call-template>
951 <xsl:call-template name="outputpkgdest">
952 <xsl:with-param
953 name="outputstring"
954 select="substring-after($outputstring,
955 substring-before($outputstring,'ninja install'))"/>
956 </xsl:call-template>
957 </xsl:when>
958 <xsl:otherwise> <!-- "ninja" is the first word and is followed by
959 "install"-->
960 <xsl:text>DESTDIR=$PKG_DEST ninja</xsl:text>
961 <xsl:call-template name="outputpkgdest">
962 <xsl:with-param
963 name="outputstring"
964 select="substring-after($outputstring,'ninja')"/>
965 </xsl:call-template>
966 </xsl:otherwise>
967 </xsl:choose>
968 </xsl:when>
969 <xsl:otherwise> <!-- no make nor ninja in this string -->
970 <xsl:choose>
971 <xsl:when test="contains($outputstring,'&gt;/') and
972 not(contains(substring-before($outputstring,'&gt;/'),' /'))">
973 <xsl:value-of select="substring-before($outputstring,'&gt;/')"/>
974 <xsl:text>&gt;$PKG_DEST/</xsl:text>
975 <xsl:call-template name="outputpkgdest">
976 <xsl:with-param name="outputstring" select="substring-after($outputstring,'&gt;/')"/>
977 </xsl:call-template>
978 </xsl:when>
979 <xsl:when test="contains($outputstring,' /')">
980 <xsl:value-of select="substring-before($outputstring,' /')"/>
981 <xsl:text> $PKG_DEST/</xsl:text>
982 <xsl:call-template name="outputpkgdest">
983 <xsl:with-param name="outputstring" select="substring-after($outputstring,' /')"/>
984 </xsl:call-template>
985 </xsl:when>
986 <xsl:otherwise>
987 <xsl:value-of select="$outputstring"/>
988 </xsl:otherwise>
989 </xsl:choose>
990 </xsl:otherwise>
991 </xsl:choose>
992 </xsl:template>
993
994 <xsl:variable name="APOS">'</xsl:variable>
995 <xsl:template name="output-wrap">
996 <xsl:param name="commands" select="''"/>
997 <xsl:choose>
998 <xsl:when test="contains($commands,string($APOS))">
999 <xsl:call-template name="output-wrap">
1000 <xsl:with-param name="commands"
1001 select="substring-before($commands,string($APOS))"/>
1002 </xsl:call-template>
1003 <xsl:text>'\''</xsl:text>
1004 <xsl:call-template name="output-wrap">
1005 <xsl:with-param name="commands"
1006 select="substring-after($commands,string($APOS))"/>
1007 </xsl:call-template>
1008 </xsl:when>
1009 <xsl:otherwise>
1010 <xsl:value-of select="$commands"/>
1011 </xsl:otherwise>
1012 </xsl:choose>
1013 </xsl:template>
1014
1015 <xsl:template name="comment-strip">
1016 <xsl:param name="instructions" select="''"/>
1017 <xsl:choose>
1018 <xsl:when test="contains($instructions,'&#xA;')">
1019 <xsl:call-template name="comment-strip">
1020 <xsl:with-param name="instructions"
1021 select="substring-before($instructions,'&#xA;')"/>
1022 </xsl:call-template>
1023 <xsl:call-template name="comment-strip">
1024 <xsl:with-param name="instructions"
1025 select="substring-after($instructions,'&#xA;')"/>
1026 </xsl:call-template>
1027 </xsl:when>
1028 <xsl:when test="contains($instructions,'\*.la')">
1029 <xsl:if test="$del-la-files='n'">
1030 <xsl:text># </xsl:text>
1031 </xsl:if>
1032 <xsl:value-of select="$instructions"/>
1033 <xsl:text>&#xA;</xsl:text>
1034 </xsl:when>
1035 <xsl:when test="contains($instructions,'strip ')">
1036 <xsl:if test="$strip='n'">
1037 <xsl:text># </xsl:text>
1038 </xsl:if>
1039 <xsl:value-of select="$instructions"/>
1040 <xsl:text> || true&#xA;</xsl:text>
1041 </xsl:when>
1042 <xsl:otherwise>
1043 <xsl:value-of select="$instructions"/>
1044 <xsl:text>&#xA;</xsl:text>
1045 </xsl:otherwise>
1046 </xsl:choose>
1047 </xsl:template>
1048
1049 <xsl:template name="comment-test">
1050 <xsl:param name="instructions" select="''"/>
1051 <xsl:choose>
1052 <xsl:when test="contains($instructions,'&#xA;')">
1053 <xsl:call-template name="comment-test">
1054 <xsl:with-param name="instructions"
1055 select="substring-before($instructions,'&#xA;')"/>
1056 </xsl:call-template>
1057 <xsl:call-template name="comment-test">
1058 <xsl:with-param name="instructions"
1059 select="substring-after($instructions,'&#xA;')"/>
1060 </xsl:call-template>
1061 </xsl:when>
1062 <xsl:otherwise>
1063 <xsl:if test="$testsuite = '0' or
1064 $testsuite = '1' and
1065 not(ancestor::sect1[@id='ch-system-gcc']) and
1066 not(ancestor::sect1[@id='ch-system-glibc']) and
1067 not(ancestor::sect1[@id='ch-system-gmp']) and
1068 not(ancestor::sect1[@id='ch-system-mpfr']) and
1069 not(ancestor::sect1[@id='ch-system-binutils']) or
1070 $testsuite = '2' and
1071 ancestor::chapter[@id='chapter-temporary-tools']">
1072 <xsl:text># </xsl:text>
1073 </xsl:if>
1074 <xsl:choose>
1075 <xsl:when test="$bomb-testsuite = 'n'">
1076 <xsl:choose>
1077 <xsl:when test="contains(string(), 'make -k')">
1078 <xsl:value-of select="$instructions"/>
1079 <xsl:text> &gt;&gt; $TEST_LOG 2&gt;&amp;1 || true&#xA;</xsl:text>
1080 </xsl:when>
1081 <xsl:when test="contains($instructions, 'make')">
1082 <xsl:value-of select="substring-before($instructions, 'make')"/>
1083 <xsl:text>make -k</xsl:text>
1084 <xsl:value-of select="substring-after($instructions, 'make')"/>
1085 <xsl:text> &gt;&gt; $TEST_LOG 2&gt;&amp;1 || true&#xA;</xsl:text>
1086 </xsl:when>
1087 <xsl:otherwise>
1088 <xsl:value-of select="$instructions"/>
1089 <xsl:if
1090 test="not(contains($instructions, '&gt;&gt;')) and
1091 substring($instructions,
1092 string-length($instructions)) != '\'">
1093 <xsl:text> &gt;&gt; $TEST_LOG 2&gt;&amp;1</xsl:text>
1094 </xsl:if>
1095 <xsl:text>&#xA;</xsl:text>
1096 </xsl:otherwise>
1097 </xsl:choose>
1098 </xsl:when>
1099 <xsl:otherwise>
1100 <!-- bomb-testsuite != 'n'-->
1101 <xsl:choose>
1102 <xsl:when test="contains($instructions, 'make -k')">
1103 <xsl:value-of select="$instructions"/>
1104 <xsl:text> &gt;&gt; $TEST_LOG 2&gt;&amp;1 || true&#xA;</xsl:text>
1105 </xsl:when>
1106 <xsl:otherwise>
1107 <xsl:value-of select="$instructions"/>
1108 <xsl:if test="not(contains($instructions, '&gt;&gt;')) and
1109 substring($instructions,
1110 string-length($instructions)) != '\'">
1111 <xsl:text> &gt;&gt; $TEST_LOG 2&gt;&amp;1</xsl:text>
1112 </xsl:if>
1113 <xsl:text>&#xA;</xsl:text>
1114 </xsl:otherwise>
1115 </xsl:choose>
1116 </xsl:otherwise> <!-- end not bomb-test=n -->
1117 </xsl:choose>
1118 </xsl:otherwise>
1119 </xsl:choose>
1120 </xsl:template>
1121
1122 <xsl:template name="basename">
1123 <xsl:param name="path" select="''"/>
1124 <xsl:choose>
1125 <xsl:when test="contains($path,'/') and substring-after($path,'/')!=''">
1126 <xsl:call-template name="basename">
1127 <xsl:with-param name="path" select="substring-after($path,'/')"/>
1128 </xsl:call-template>
1129 </xsl:when>
1130 <xsl:when test="contains($path,'/') and substring-after($path,'/')=''">
1131 <xsl:value-of select="substring-before($path,'/')"/>
1132 </xsl:when>
1133 <xsl:otherwise>
1134 <xsl:value-of select="$path"/>
1135 </xsl:otherwise>
1136 </xsl:choose>
1137 </xsl:template>
1138
1139 <xsl:template name="start-script">
1140 <xsl:param name="order" select="'073'"/>
1141 <xsl:text>
1142<!-- save the timer, so that unpacking, and du is not counted -->
1143PREV_SEC=${SECONDS}
1144 <!-- get the location of the system root -->
1145if [ -h /tools ]; then
1146 ROOT=$(dirname $(readlink /tools))/
1147else
1148 ROOT=/
1149fi
1150SCRIPT_ROOT=</xsl:text>
1151 <xsl:copy-of select="$script-root"/>
1152 <xsl:text>
1153</xsl:text>
1154 <xsl:if test="sect2[@role='installation']">
1155 <xsl:text>
1156SRC_DIR=${ROOT}sources
1157<!-- Set variables, for use by the Makefile and package manager -->
1158VERSION=</xsl:text><!-- needed for Makefile, and may be used in PackInstall-->
1159 <xsl:copy-of select=".//sect1info/productnumber/text()"/>
1160 <xsl:text>
1161PKG_DEST=${SRC_DIR}/</xsl:text>
1162 <xsl:copy-of select="$order"/>
1163 <xsl:text>-</xsl:text>
1164 <xsl:copy-of select=".//sect1info/productname/text()"/>
1165 <xsl:text>
1166<!-- Get the tarball name from sect1info -->
1167PACKAGE=</xsl:text>
1168 <xsl:call-template name="basename">
1169 <xsl:with-param name="path" select=".//sect1info/address/text()"/>
1170 </xsl:call-template>
1171 <xsl:if test = "( ../@id != 'chapter-temporary-tools' or
1172 starts-with(@id,'ch-system') ) and $pkgmngt = 'y'">
1173 <xsl:text>
1174source ${ROOT}${SCRIPT_ROOT}/packInstall.sh
1175export -f packInstall</xsl:text>
1176 <xsl:if test="$wrap-install='y'">
1177 <xsl:text>
1178export -f wrapInstall
1179</xsl:text>
1180 </xsl:if>
1181 </xsl:if>
1182<!-- Get the build directory name and clean remnants of previous attempts -->
1183 <xsl:text>
1184cd $SRC_DIR
1185PKGDIR=$(tar -tf $PACKAGE | head -n1 | sed 's@^./@@;s@/.*@@')
1186export PKGDIR VERSION PKG_DEST
1187
1188if [ -d "$PKGDIR" ]; then rm -rf $PKGDIR; fi
1189if [ -d "${PKGDIR%-*}-build" ]; then rm -rf ${PKGDIR%-*}-build; fi
1190</xsl:text>
1191 </xsl:if>
1192 <xsl:text>
1193echo "KB: $(du -skx --exclude=lost+found --exclude=var/lib --exclude=$SCRIPT_ROOT $ROOT)"
1194</xsl:text>
1195 <xsl:if test="sect2[@role='installation']">
1196 <xsl:text>
1197<!-- At last unpack and change directory -->
1198tar -xf $PACKAGE
1199cd $PKGDIR
1200</xsl:text>
1201 </xsl:if>
1202 <xsl:text>SECONDS=${PREV_SEC}
1203
1204# Start of LFS book script
1205</xsl:text>
1206 </xsl:template>
1207
1208 <xsl:template name="end-script">
1209 <xsl:text>
1210# End of LFS book script
1211
1212echo "KB: $(du -skx --exclude=lost+found --exclude=var/lib --exclude=$SCRIPT_ROOT $ROOT)"
1213</xsl:text>
1214 <xsl:if test="sect2[@role='installation']">
1215 <xsl:text>cd $SRC_DIR
1216rm -rf $PKGDIR
1217if [ -d "${PKGDIR%-*}-build" ]; then rm -rf ${PKGDIR%-*}-build; fi
1218</xsl:text>
1219 </xsl:if>
1220 </xsl:template>
1221
1222</xsl:stylesheet>
Note: See TracBrowser for help on using the repository browser.