Context Navigation

source: LFS/lfs.xsl@ e06a0d3

new_features

Last change on this file since e06a0d3 was d8ddcfb, checked in by Pierre Labastie <pierre@…>, 8 years ago
Fix the generation of scripts of the networkd page (systemd book).
Property mode set to `100644`
File size: 37.4 KB

Line
1	<?xml version="1.0" encoding="ISO-8859-1"?>
2
3	<!-- $Id$ -->
4
5	<xsl:stylesheet
6	xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
7	xmlns:exsl="http://exslt.org/common"
8	extension-element-prefixes="exsl"
9	version="1.0">
10
11	<!-- Parameters -->
12
13	<!-- use package management ?
14	n = no, original behavior
15	y = yes, add PKG_DEST to scripts in install commands of chapter06-08
16	-->
17	<xsl:param name="pkgmngt" select="'n'"/>
18
19	<!-- Package management with "porg style" ?
20	n = no, same as pkgmngt description above
21	y = yes, wrap install commands of chapter06-08 into a bash function.
22	note that pkgmngt must be 'y' in this case
23	-->
24	<xsl:param name="wrap-install" select='"n"'/>
25
26	<!-- Run test suites?
27	0 = none
28	1 = only chapter06 critical testsuites
29	2 = all chapter06 testsuites
30	3 = all chapter05 and chapter06 testsuites
31	-->
32	<xsl:param name="testsuite" select="1"/>
33
34	<!-- Bomb on test suites failures?
35	n = no, I want to build the full system and review the logs
36	y = yes, bomb at the first test suite failure to can review the build dir
37	-->
38	<xsl:param name="bomb-testsuite" select="'n'"/>
39
40	<!-- Install vim-lang package? OBSOLETE should always be 'n'-->
41	<xsl:param name="vim-lang" select="'n'"/>
42
43	<!-- Time zone -->
44	<xsl:param name="timezone" select="'GMT'"/>
45
46	<!-- Page size -->
47	<xsl:param name="page" select="'letter'"/>
48
49	<!-- Locale settings -->
50	<xsl:param name="lang" select="'C'"/>
51
52	<!-- Install the whole set of locales -->
53	<xsl:param name='full-locale' select='"n"'/>
54
55	<!-- Hostname -->
56	<xsl:param name='hostname' select='"HOSTNAME"'/>
57
58	<!-- Network parameters: interface, ip, gateway, prefix, broadcast, domain
59	and nameservers -->
60	<xsl:param name='interface' select="'eth0'"/>
61	<xsl:param name='ip' select='"10.0.2.9"'/>
62	<xsl:param name='gateway' select='"10.0.2.2"'/>
63	<xsl:param name='prefix' select='24'/>
64	<xsl:param name='broadcast' select='"10.0.2.255"'/>
65	<xsl:param name='domain' select='"lfs.org"'/>
66	<xsl:param name='nameserver1' select='"10.0.2.3"'/>
67	<xsl:param name='nameserver2' select='"8.8.8.8"'/>
68
69	<!-- End parameters -->
70
71	<xsl:template match="/">
72	<xsl:apply-templates select="//sect1"/>
73	</xsl:template>
74
75	<xsl:template match="sect1">
76	<xsl:if test="(../@id='chapter-temporary-tools' or
77	../@id='chapter-building-system' or
78	../@id='chapter-bootscripts' or
79	../@id='chapter-bootable') and
80	count(descendant::screen/userinput) > 0 and
81	count(descendant::screen/userinput) >
82	count(descendant::screen[@role='nodump']) and
83	count(descendant::screen/userinput) >
84	count(descendant::screen/userinput[starts-with(string(),'chroot')])">
85	<!-- The last condition is a hack to allow previous versions of the
86	book where the chroot commands did not have role="nodump".
87	It only works if the chroot command is the only one on the page -->
88	<!-- The dirs names -->
89	<xsl:variable name="pi-dir" select="../processing-instruction('dbhtml')"/>
90	<xsl:variable name="pi-dir-value" select="substring-after($pi-dir,'dir=')"/>
91	<xsl:variable name="quote-dir" select="substring($pi-dir-value,1,1)"/>
92	<xsl:variable name="dirname" select="substring-before(substring($pi-dir-value,2),$quote-dir)"/>
93	<!-- The file names -->
94	<xsl:variable name="pi-file" select="processing-instruction('dbhtml')"/>
95	<xsl:variable name="pi-file-value" select="substring-after($pi-file,'filename=')"/>
96	<xsl:variable name="filename" select="substring-before(substring($pi-file-value,2),'.html')"/>
97	<!-- The build order -->
98	<xsl:variable name="position" select="position()"/>
99	<xsl:variable name="order">
100	<xsl:choose>
101	<xsl:when test="string-length($position) = 1">
102	<xsl:text>00</xsl:text>
103	<xsl:value-of select="$position"/>
104	</xsl:when>
105	<xsl:when test="string-length($position) = 2">
106	<xsl:text>0</xsl:text>
107	<xsl:value-of select="$position"/>
108	</xsl:when>
109	<xsl:otherwise>
110	<xsl:value-of select="$position"/>
111	</xsl:otherwise>
112	</xsl:choose>
113	</xsl:variable>
114	<!-- Inclusion of package manager scriptlets -->
115	<xsl:if test="@id='ch-tools-stripping' and $pkgmngt='y'">
116	<xsl:apply-templates
117	select="document('packageManager.xml')//sect1[contains(@id,'ch-tools')]"
118	mode="pkgmngt">
119	<xsl:with-param name="order" select="$order"/>
120	<xsl:with-param name="dirname" select="$dirname"/>
121	</xsl:apply-templates>
122	</xsl:if>
123	<xsl:if test="@id='ch-system-strippingagain' and $pkgmngt='y'">
124	<xsl:apply-templates
125	select="document('packageManager.xml')//sect1[contains(@id,'ch-system')]"
126	mode="pkgmngt">
127	<xsl:with-param name="order" select="$order"/>
128	<xsl:with-param name="dirname" select="$dirname"/>
129	</xsl:apply-templates>
130	</xsl:if>
131	<!-- Creating dirs and files -->
132	<exsl:document href="{$dirname}/{$order}-{$filename}" method="text">
133	<xsl:choose>
134	<xsl:when test="@id='ch-system-creatingdirs' or
135	@id='ch-system-createfiles' or
136	@id='ch-system-strippingagain'">
137	<xsl:text>#!/tools/bin/bash set +h </xsl:text>
138	</xsl:when>
139	<xsl:otherwise>
140	<xsl:text>#!/bin/bash set +h </xsl:text>
141	</xsl:otherwise>
142	</xsl:choose>
143	<xsl:if test="not(@id='ch-tools-stripping') and
144	not(@id='ch-system-strippingagain')">
145	<xsl:text>set -e </xsl:text>
146	</xsl:if>
147	<xsl:text> </xsl:text>
148	<xsl:if test="sect2[@role='installation']">
149	<xsl:text>cd $PKGDIR </xsl:text>
150	</xsl:if>
151	<xsl:apply-templates select="sect2\|
152	screen[not(@role) or
153	@role!='nodump']/userinput"/>
154	<xsl:if test="@id='ch-system-creatingdirs' and $pkgmngt='y'">
155	<xsl:apply-templates
156	select="document('packageManager.xml')//sect1[
157	@id='ch-pkgmngt-creatingdirs'
158	]//userinput"
159	mode="pkgmngt"/>
160	</xsl:if>
161	<xsl:if test="@id='ch-system-createfiles' and $pkgmngt='y'">
162	<xsl:apply-templates
163	select="document('packageManager.xml')//sect1[
164	@id='ch-pkgmngt-createfiles'
165	]//userinput"
166	mode="pkgmngt"/>
167	</xsl:if>
168	<xsl:text>echo -e "\n\nTotalseconds: $SECONDS\n" </xsl:text>
169	<xsl:text>exit </xsl:text>
170	</exsl:document>
171	</xsl:if>
172	</xsl:template>
173
174	<xsl:template match="sect2">
175	<xsl:apply-templates
176	select=".//screen[not(@role) or
177	@role != 'nodump']/userinput[
178	@remap = 'pre' or
179	@remap = 'configure' or
180	@remap = 'make' or
181	@remap = 'test' and
182	not(current()/../@id='ch-tools-dejagnu') and
183	not(current()/../@id='ch-system-systemd')]"/>
184	<xsl:if
185	test="ancestor::chapter[@id != 'chapter-temporary-tools'] and
186	$pkgmngt = 'y' and
187	descendant::screen[not(@role) or
188	@role != 'nodump']/userinput[
189	@remap='install']">
190	<xsl:choose>
191	<xsl:when test="$wrap-install='y'">
192	<xsl:text>wrapInstall '
193	</xsl:text>
194	</xsl:when>
195	<xsl:otherwise>
196	<xsl:text>mkdir -pv $PKG_DEST/{boot,etc,lib,bin,sbin}
197	mkdir -pv $PKG_DEST/usr/{lib,bin,sbin,include}
198	mkdir -pv $PKG_DEST/usr/share/{doc,info,man}
199	mkdir -pv $PKG_DEST/usr/share/man/man{1..8}
200	ln -sv share/{man,doc,info} $PKG_DEST/usr
201	case $(uname -m) in
202	x86_64) ln -sv lib $PKG_DEST/lib64 && ln -sv lib $PKG_DEST/usr/lib64 ;;
203	esac
204	</xsl:text>
205	</xsl:otherwise>
206	</xsl:choose>
207	</xsl:if>
208	<xsl:if test="../@id = 'ch-system-glibc' and
209	@role='installation' and
210	$pkgmngt = 'y' and
211	$wrap-install = 'n'">
212	<xsl:text>mkdir -pv $PKG_DEST/usr/include/{rpc,rpcsvc}
213	</xsl:text>
214	</xsl:if>
215	<xsl:apply-templates
216	select=".//screen[not(@role) or
217	@role != 'nodump']/userinput[@remap = 'install']"/>
218	<xsl:if test="ancestor::chapter[@id != 'chapter-temporary-tools'] and
219	$pkgmngt = 'y' and
220	descendant::screen[not(@role) or
221	@role != 'nodump']/userinput[
222	@remap='install']">
223	<xsl:choose>
224	<xsl:when test="$wrap-install='y'">
225	<xsl:if test="../@id = 'ch-system-man-pages'">
226	<!-- these files are provided by the shadow package -->
227	<xsl:text>rm -fv /usr/share/man/{man3/getspnam.3,man5/passwd.5}
228	</xsl:text>
229	</xsl:if>
230	<!-- Attr man/man2 pages are already installed by man-pages. As of
231	March 2013, they are the same pages.
232	November 2015: now they are more accurate
233	in man-pages, and the man5 section is also in man-pages... -->
234	<xsl:if test="../@id = 'ch-system-attr'">
235	<xsl:text>rm -fv /usr/share/man/man2/*
236	rm -fv /usr/share/man/man5/*
237	</xsl:text>
238	</xsl:if>
239	<!-- nologin is installed by util-linux. remove it from shadow -->
240	<xsl:if test="../@id = 'ch-system-shadow'">
241	<xsl:text>rm -fv /usr/share/man/man8/nologin.8
242	rm -fv /sbin/nologin
243	</xsl:text>
244	</xsl:if>
245	<xsl:text>'
246	packInstall
247	</xsl:text>
248	</xsl:when>
249	<xsl:otherwise>
250	<xsl:if test="../@id = 'ch-system-man-pages'">
251	<!-- these files are provided by the shadow package -->
252	<xsl:text>rm -fv $PKG_DEST/usr/share/man/{man3/getspnam.3,man5/passwd.5}
253	</xsl:text>
254	</xsl:if>
255	<!-- Attr man/man2 pages are already installed by man-pages. As of
256	March 2013, they are the same pages.
257	November 2015: now they are more accurate
258	in man-pages, and the man5 section is also in man-pages... -->
259	<xsl:if test="../@id = 'ch-system-attr'">
260	<xsl:text>rm -fv $PKG_DEST/usr/share/man/man2/*
261	rm -fv $PKG_DEST/usr/share/man/man5/*
262	</xsl:text>
263	</xsl:if>
264	<!-- nologin is installed by util-linux. remove it from shadow -->
265	<xsl:if test="../@id = 'ch-system-shadow'">
266	<xsl:text>rm -fv $PKG_DEST/usr/share/man/man8/nologin.8
267	rm -fv $PKG_DEST/sbin/nologin
268	</xsl:text>
269	</xsl:if>
270	<xsl:text>rm -fv $PKG_DEST/{,usr/}lib64
271	rm -fv $PKG_DEST/usr/{man,doc,info}
272	for dir in $PKG_DEST/usr/share/man/man{1..8}; do
273	[[ -z $(ls $dir) ]] && rmdir -v $dir
274	done
275	for dir in $PKG_DEST/usr/share/{doc,info,man}; do
276	[[ -z $(ls $dir) ]] && rmdir -v $dir
277	done
278	for dir in $PKG_DEST/usr/{lib,bin,sbin,include}; do
279	[[ -z $(ls $dir) ]] && rmdir -v $dir
280	done
281	for dir in $PKG_DEST/{boot,etc,lib,bin,sbin}; do
282	[[ -z $(ls $dir) ]] && rmdir -v $dir
283	done
284	packInstall
285	rm -rf $PKG_DEST
286	</xsl:text>
287	</xsl:otherwise>
288	</xsl:choose>
289	</xsl:if>
290	<xsl:if test="$testsuite='3' and
291	../@id='ch-tools-glibc' and
292	@role='installation'">
293	<xsl:copy-of select="//userinput[@remap='locale-test']"/>
294	<xsl:text> </xsl:text>
295	</xsl:if>
296	<xsl:if test="../@id='ch-system-glibc' and @role='installation'">
297	<xsl:choose>
298	<xsl:when test="$full-locale='y'">
299	<xsl:copy-of select="//userinput[@remap='locale-full']"/>
300	<xsl:text> </xsl:text>
301	</xsl:when>
302	<xsl:otherwise>
303	<xsl:copy-of select="//userinput[@remap='locale-test']"/>
304	<xsl:text> </xsl:text>
305	<xsl:if test="not(contains(string(//userinput[@remap='locale-test']),$lang)) and $lang!='C' and $lang!='POSIX'">
306	<xsl:text>if LOCALE=`grep "</xsl:text>
307	<xsl:value-of select="$lang"/>
308	<xsl:text>/" $PKGDIR/localedata/SUPPORTED`; then
309	CHARMAP=`echo $LOCALE \| sed 's,[^/]/\([^ ]\) [\],\1,'`
310	INPUT=`echo $LOCALE \| sed 's,[/.].*,,'`
311	LOCALE=`echo $LOCALE \| sed 's,/.*,,'`
312	localedef -i $INPUT -f $CHARMAP $LOCALE
313	fi
314	</xsl:text>
315	</xsl:if>
316	</xsl:otherwise>
317	</xsl:choose>
318	</xsl:if>
319	<xsl:apply-templates
320	select=".//screen[
321	not(@role) or
322	@role != 'nodump'
323	]/userinput[
324	not(@remap) or
325	@remap='adjust' or
326	@remap='test' and current()/../@id='ch-tools-dejagnu' or
327	@remap='test' and current()/../@id='ch-system-systemd'
328	]"/>
329	</xsl:template>
330
331	<xsl:template match="sect1" mode="pkgmngt">
332	<xsl:param name="dirname" select="chapter05"/>
333	<!-- The build order -->
334	<xsl:param name="order" select="062"/>
335	<!-- The file names -->
336	<xsl:variable name="pi-file" select="processing-instruction('dbhtml')"/>
337	<xsl:variable name="pi-file-value" select="substring-after($pi-file,'filename=')"/>
338	<xsl:variable name="filename" select="substring-before(substring($pi-file-value,2),'.html')"/>
339	<!-- Creating dirs and files -->
340	<xsl:if test="count(descendant::screen/userinput) > 0 and
341	count(descendant::screen/userinput) >
342	count(descendant::screen[@role='nodump'])">
343	<exsl:document href="{$dirname}/{$order}-{position()}-{$filename}"
344	method="text">
345	<xsl:text>#!/bin/bash
346	set +h
347	set -e
348
349	cd $PKGDIR
350	</xsl:text>
351	<xsl:apply-templates
352	select=".//screen[not(@role) or
353	@role != 'nodump']/userinput[@remap != 'adjust']"
354	mode="pkgmngt"/>
355	<xsl:if test="$dirname = 'chapter06'">
356	<xsl:text>packInstall
357	rm -rf "$PKG_DEST"
358	</xsl:text>
359	</xsl:if>
360	<xsl:apply-templates
361	select=".//screen[not(@role) or
362	@role != 'nodump'
363	]/userinput[not(@remap) or
364	@remap='adjust'
365	]"
366	mode="pkgmngt"/>
367	<xsl:text>
368	echo -e "\n\nTotalseconds: $SECONDS\n"
369	exit
370	</xsl:text>
371	</exsl:document>
372	</xsl:if>
373	</xsl:template>
374
375	<xsl:template match="userinput" mode="pkgmngt">
376	<xsl:apply-templates/>
377	<xsl:text> </xsl:text>
378	</xsl:template>
379
380	<xsl:template match="userinput">
381	<xsl:choose>
382	<!-- Copying the kernel config file -->
383	<xsl:when test="string() = 'make mrproper'">
384	<xsl:text>make mrproper </xsl:text>
385	<xsl:if test="ancestor::sect1[@id='ch-bootable-kernel']">
386	<xsl:text>cp -v ../kernel-config .config </xsl:text>
387	</xsl:if>
388	</xsl:when>
389	<!-- test instructions -->
390	<xsl:when test="@remap = 'test'">
391	<xsl:choose>
392	<xsl:when test="$testsuite = '0'"/>
393	<xsl:when test="$testsuite = '1' and
394	not(ancestor::sect1[@id='ch-system-gcc']) and
395	not(ancestor::sect1[@id='ch-system-glibc']) and
396	not(ancestor::sect1[@id='ch-system-gmp']) and
397	not(ancestor::sect1[@id='ch-system-mpfr']) and
398	not(ancestor::sect1[@id='ch-system-binutils'])"/>
399	<xsl:when test="$testsuite = '2' and
400	ancestor::chapter[@id='chapter-temporary-tools']"/>
401	<xsl:otherwise>
402	<xsl:choose>
403	<xsl:when test="$bomb-testsuite = 'n'">
404	<xsl:choose>
405	<!-- special case for glibc -->
406	<xsl:when test="contains(string(), 'glibc-check-log')">
407	<xsl:value-of
408	select="substring-before(string(),'2>&1')"/>
409	<xsl:text>>> $TEST_LOG 2>&1 \|\| true </xsl:text>
410	</xsl:when>
411	<!-- special case for procps-ng -->
412	<xsl:when test="contains(string(), 'pushd')">
413	<xsl:text>{ </xsl:text>
414	<xsl:apply-templates/>
415	<xsl:text>; } >> $TEST_LOG 2>&1 \|\| true </xsl:text>
416	</xsl:when>
417	<xsl:when test="contains(string(), 'make -k')">
418	<xsl:apply-templates/>
419	<xsl:text> >> $TEST_LOG 2>&1 \|\| true </xsl:text>
420	</xsl:when>
421	<xsl:when test="contains(string(), 'make')">
422	<xsl:value-of select="substring-before(string(),'make')"/>
423	<xsl:text>make -k</xsl:text>
424	<xsl:value-of select="substring-after(string(),'make')"/>
425	<xsl:text> >> $TEST_LOG 2>&1 \|\| true </xsl:text>
426	</xsl:when>
427	<xsl:otherwise>
428	<xsl:apply-templates/>
429	<xsl:if test="not(contains(string(), '>>'))">
430	<xsl:text> >> $TEST_LOG 2>&1</xsl:text>
431	</xsl:if>
432	<xsl:text> </xsl:text>
433	</xsl:otherwise>
434	</xsl:choose>
435	</xsl:when>
436	<xsl:otherwise>
437	<!-- bomb-testsuite != 'n'-->
438	<xsl:choose>
439	<!-- special case for glibc -->
440	<xsl:when test="contains(string(), 'glibc-check-log')">
441	<xsl:value-of
442	select="substring-before(string(),'2>&1')"/>
443	<xsl:text>>> $TEST_LOG 2>&1 \|\| true </xsl:text>
444	</xsl:when>
445	<!-- special case for gmp -->
446	<xsl:when test="contains(string(), 'tee gmp-check-log')">
447	<xsl:text>(</xsl:text>
448	<xsl:apply-templates/>
449	<xsl:text>>> $TEST_LOG 2>&1 && exit $PIPESTATUS) </xsl:text>
450	</xsl:when>
451	<!-- special case for procps-ng -->
452	<xsl:when test="contains(string(), 'pushd')">
453	<xsl:text>{ </xsl:text>
454	<xsl:apply-templates/>
455	<xsl:text>; } >> $TEST_LOG 2>&1 </xsl:text>
456	</xsl:when>
457	<xsl:when test="contains(string(), 'make -k')">
458	<xsl:apply-templates/>
459	<xsl:text> >> $TEST_LOG 2>&1 \|\| true </xsl:text>
460	</xsl:when>
461	<xsl:otherwise>
462	<xsl:apply-templates/>
463	<xsl:if test="not(contains(string(), '>>'))">
464	<xsl:text> >> $TEST_LOG 2>&1</xsl:text>
465	</xsl:if>
466	<xsl:text> </xsl:text>
467	</xsl:otherwise>
468	</xsl:choose>
469	</xsl:otherwise>
470	</xsl:choose>
471	</xsl:otherwise>
472	</xsl:choose>
473	</xsl:when>
474	<!-- End of test instructions -->
475	<!-- Don't stop on strip run -->
476	<xsl:when test="contains(string(),'strip ')">
477	<xsl:apply-templates/>
478	<xsl:text> \|\| true </xsl:text>
479	</xsl:when>
480	<!-- Package management -->
481	<!-- Add $PKG_DEST to installation commands -->
482	<xsl:when test="@remap='install' and
483	not(ancestor::chapter[
484	@id='chapter-temporary-tools'
485	])">
486	<xsl:choose>
487	<xsl:when test="$pkgmngt='n'">
488	<xsl:choose>
489	<xsl:when test="contains(string(),'firmware,udev')">
490	<xsl:text>if [[ ! -d /lib/udev/devices ]] ; then </xsl:text>
491	<xsl:apply-templates/>
492	<xsl:text> fi </xsl:text>
493	</xsl:when>
494	<xsl:otherwise>
495	<xsl:apply-templates/>
496	<xsl:text> </xsl:text>
497	</xsl:otherwise>
498	</xsl:choose>
499	</xsl:when>
500	<xsl:when test="$wrap-install='y'">
501	<xsl:choose>
502	<xsl:when test="./literal">
503	<xsl:call-template name="output-wrap">
504	<xsl:with-param name="commands" select="text()[1]"/>
505	</xsl:call-template>
506	<xsl:apply-templates select="literal"/>
507	<xsl:call-template name="output-wrap">
508	<xsl:with-param name="commands" select="text()[2]"/>
509	</xsl:call-template>
510	</xsl:when>
511	<xsl:otherwise>
512	<xsl:call-template name="output-wrap">
513	<xsl:with-param name="commands" select="string()"/>
514	</xsl:call-template>
515	</xsl:otherwise>
516	</xsl:choose>
517	<xsl:text> </xsl:text>
518	</xsl:when>
519	<xsl:otherwise><!--pkgmngt = 'y' and wrap-install='n'-->
520	<xsl:choose>
521	<xsl:when test="./literal">
522	<xsl:call-template name="outputpkgdest">
523	<xsl:with-param name="outputstring" select="text()[1]"/>
524	</xsl:call-template>
525	<xsl:apply-templates select="literal"/>
526	<xsl:call-template name="outputpkgdest">
527	<xsl:with-param name="outputstring" select="text()[2]"/>
528	</xsl:call-template>
529	</xsl:when>
530	<xsl:otherwise>
531	<xsl:call-template name="outputpkgdest">
532	<xsl:with-param name="outputstring" select="string()"/>
533	</xsl:call-template>
534	</xsl:otherwise>
535	</xsl:choose>
536	</xsl:otherwise>
537	</xsl:choose>
538	</xsl:when>
539	<!-- if package management, we should make an independant package for
540	tzdata. -->
541	<xsl:when test="contains(string(),'tzdata') and $pkgmngt='y'">
542	<xsl:text>
543	OLD_PKG_DEST="$PKG_DEST"
544	OLD_PKGDIR=$PKGDIR
545	PKG_DEST=$(dirname $OLD_PKG_DEST)/001-tzdata
546	PKGDIR=$(dirname $PKGDIR)/tzdata-</xsl:text>
547	<xsl:copy-of select="substring-before(
548	substring-after(string(),'tzdata'),
549	'.tar')"/>
550	<xsl:text>
551	</xsl:text>
552	<xsl:choose>
553	<xsl:when test="$wrap-install='n'">
554	<xsl:copy-of select="substring-before(string(),'ZONEINFO=')"/>
555	<xsl:text>ZONEINFO=$PKG_DEST</xsl:text>
556	<xsl:copy-of select="substring-after(string(),'ZONEINFO=')"/>
557	<xsl:text>
558	packInstall
559	rm -rf $PKG_DEST
560	</xsl:text>
561	</xsl:when>
562	<xsl:otherwise><!-- wrap-install='y' -->
563	<xsl:copy-of select="substring-before(string(),'ZONEINFO=')"/>
564	<xsl:text>
565	wrapInstall '
566	ZONEINFO=</xsl:text>
567	<xsl:copy-of select="substring-after(string(),'ZONEINFO=')"/>
568	<xsl:text>'
569	packInstall
570	</xsl:text>
571	</xsl:otherwise>
572	</xsl:choose>
573	<xsl:text>
574	PKG_DEST=$OLD_PKG_DEST
575	unset OLD_PKG_DEST
576	PKGDIR=$OLD_PKGDIR
577	unset OLD_PKGDIR
578	</xsl:text>
579	</xsl:when><!-- addition for tzdata + package management -->
580	<!-- End addition for package management -->
581	<!-- The rest of commands -->
582	<xsl:otherwise>
583	<xsl:apply-templates/>
584	<xsl:text> </xsl:text>
585	</xsl:otherwise>
586	</xsl:choose>
587	</xsl:template>
588
589	<xsl:template match="replaceable">
590	<xsl:choose>
591	<xsl:when test="ancestor::sect1[@id='ch-system-glibc']">
592	<xsl:value-of select="$timezone"/>
593	</xsl:when>
594	<xsl:when test="ancestor::sect1[@id='ch-system-groff']">
595	<xsl:value-of select="$page"/>
596	</xsl:when>
597	<xsl:when test="contains(string(.),'<ll>_<CC>')">
598	<xsl:value-of select="$lang"/>
599	</xsl:when>
600	<xsl:when test="contains(string(.),'Domain')">
601	<xsl:value-of select="$domain"/>
602	</xsl:when>
603	<xsl:when test="contains(string(.),'primary')">
604	<xsl:value-of select="$nameserver1"/>
605	</xsl:when>
606	<xsl:when test="contains(string(.),'secondary')">
607	<xsl:value-of select="$nameserver2"/>
608	</xsl:when>
609	<xsl:when test="contains(string(.),'192.168.1.1')">
610	<xsl:value-of select="$ip"/>
611	</xsl:when>
612	<xsl:when test="contains(string(.),'HOSTNAME')">
613	<xsl:value-of select="$hostname"/>
614	<xsl:text>.</xsl:text>
615	<xsl:value-of select="$domain"/>
616	</xsl:when>
617	<xsl:when test="contains(string(.),'alias')">
618	<xsl:value-of select="$hostname"/>
619	</xsl:when>
620	<xsl:when test="contains(string(.),'<lfs>')">
621	<xsl:value-of select="$hostname"/>
622	</xsl:when>
623	<xsl:otherwise>
624	<xsl:text>**EDITME</xsl:text>
625	<xsl:apply-templates/>
626	<xsl:text>EDITME**</xsl:text>
627	</xsl:otherwise>
628	</xsl:choose>
629	</xsl:template>
630
631	<xsl:template match="literal">
632	<xsl:choose>
633	<xsl:when test="contains(string(),'ONBOOT')">
634	<xsl:call-template name="outputnet">
635	<xsl:with-param name="netstring" select="string()"/>
636	</xsl:call-template>
637	</xsl:when>
638	<xsl:when test="contains(string(),'[Match]')">
639	<xsl:call-template name="outputsysdnet">
640	<xsl:with-param name="netstring" select="string()"/>
641	</xsl:call-template>
642	</xsl:when>
643	<xsl:otherwise>
644	<xsl:apply-templates/>
645	</xsl:otherwise>
646	</xsl:choose>
647	</xsl:template>
648
649	<xsl:template name="outputnet">
650	<xsl:param name="netstring" select="''"/>
651	<!-- We suppose that book example has the following values:
652	- interface: eth0
653	- ip: 192.168.1.2
654	- gateway: 192.168.1.1
655	- prefix: 24
656	- broadcast: 192.168.1.255
657	Change below if book changes -->
658	<xsl:choose>
659	<xsl:when test="contains($netstring,'eth0')">
660	<xsl:call-template name="outputnet">
661	<xsl:with-param name="netstring"
662	select="substring-before($netstring,'eth0')"/>
663	</xsl:call-template>
664	<xsl:value-of select="$interface"/>
665	<xsl:call-template name="outputnet">
666	<xsl:with-param name="netstring"
667	select="substring-after($netstring,'eth0')"/>
668	</xsl:call-template>
669	</xsl:when>
670	<xsl:when test="contains($netstring,'192.168.1.1')">
671	<xsl:call-template name="outputnet">
672	<xsl:with-param name="netstring"
673	select="substring-before($netstring,'192.168.1.1')"/>
674	</xsl:call-template>
675	<xsl:value-of select="$gateway"/>
676	<xsl:call-template name="outputnet">
677	<xsl:with-param name="netstring"
678	select="substring-after($netstring,'192.168.1.1')"/>
679	</xsl:call-template>
680	</xsl:when>
681	<!-- must test this before the following, because 192.168.1.255 contains
682	192.168.1.2! -->
683	<xsl:when test="contains($netstring,'192.168.1.255')">
684	<xsl:call-template name="outputnet">
685	<xsl:with-param name="netstring"
686	select="substring-before($netstring,'192.168.1.255')"/>
687	</xsl:call-template>
688	<xsl:value-of select="$broadcast"/>
689	<xsl:call-template name="outputnet">
690	<xsl:with-param name="netstring"
691	select="substring-after($netstring,'192.168.1.255')"/>
692	</xsl:call-template>
693	</xsl:when>
694	<xsl:when test="contains($netstring,'192.168.1.2')">
695	<xsl:call-template name="outputnet">
696	<xsl:with-param name="netstring"
697	select="substring-before($netstring,'192.168.1.2')"/>
698	</xsl:call-template>
699	<xsl:value-of select="$ip"/>
700	<xsl:call-template name="outputnet">
701	<xsl:with-param name="netstring"
702	select="substring-after($netstring,'192.168.1.2')"/>
703	</xsl:call-template>
704	</xsl:when>
705	<xsl:when test="contains($netstring,'24')">
706	<xsl:call-template name="outputnet">
707	<xsl:with-param name="netstring"
708	select="substring-before($netstring,'24')"/>
709	</xsl:call-template>
710	<xsl:value-of select="$prefix"/>
711	<xsl:call-template name="outputnet">
712	<xsl:with-param name="netstring"
713	select="substring-after($netstring,'24')"/>
714	</xsl:call-template>
715	</xsl:when>
716	<xsl:otherwise>
717	<xsl:value-of select="$netstring"/>
718	</xsl:otherwise>
719	</xsl:choose>
720	</xsl:template>
721
722	<xsl:template name="outputsysdnet">
723	<xsl:param name="netstring" select="''"/>
724	<!-- We suppose that book example has the following values:
725	- interface: eth0
726	- ip: 192.168.0.2
727	- gateway: 192.168.0.1
728	- prefix: 24
729	- DNS: 192.168.0.1
730	- Domain: <Your Domain Name>
731	and gateway comes before DNS. Change below if book changes -->
732	<xsl:choose>
733	<xsl:when test="contains($netstring,'eth0')">
734	<xsl:call-template name="outputsysdnet">
735	<xsl:with-param name="netstring"
736	select="substring-before($netstring,'eth0')"/>
737	</xsl:call-template>
738	<xsl:value-of select="$interface"/>
739	<xsl:call-template name="outputsysdnet">
740	<xsl:with-param name="netstring"
741	select="substring-after($netstring,'eth0')"/>
742	</xsl:call-template>
743	</xsl:when>
744	<xsl:when test="contains($netstring,'192.168.0.1') and
745	contains($netstring,'Gateway')">
746	<xsl:call-template name="outputsysdnet">
747	<xsl:with-param name="netstring"
748	select="substring-before($netstring,'192.168.0.1')"/>
749	</xsl:call-template>
750	<xsl:value-of select="$gateway"/>
751	<xsl:call-template name="outputsysdnet">
752	<xsl:with-param name="netstring"
753	select="substring-after($netstring,'192.168.0.1')"/>
754	</xsl:call-template>
755	</xsl:when>
756	<xsl:when test="contains($netstring,'192.168.0.1') and
757	not(contains($netstring,'Gateway'))">
758	<xsl:call-template name="outputsysdnet">
759	<xsl:with-param name="netstring"
760	select="substring-before($netstring,'192.168.0.1')"/>
761	</xsl:call-template>
762	<xsl:value-of select="$nameserver1"/>
763	<xsl:text>
764	DNS=</xsl:text>
765	<xsl:value-of select="$nameserver2"/>
766	<xsl:call-template name="outputsysdnet">
767	<xsl:with-param name="netstring"
768	select="substring-after($netstring,'192.168.0.1')"/>
769	</xsl:call-template>
770	</xsl:when>
771	<xsl:when test="contains($netstring,'192.168.0.2')">
772	<xsl:call-template name="outputsysdnet">
773	<xsl:with-param name="netstring"
774	select="substring-before($netstring,'192.168.0.2')"/>
775	</xsl:call-template>
776	<xsl:value-of select="$ip"/>
777	<xsl:call-template name="outputsysdnet">
778	<xsl:with-param name="netstring"
779	select="substring-after($netstring,'192.168.0.2')"/>
780	</xsl:call-template>
781	</xsl:when>
782	<xsl:when test="contains($netstring,'24')">
783	<xsl:call-template name="outputsysdnet">
784	<xsl:with-param name="netstring"
785	select="substring-before($netstring,'24')"/>
786	</xsl:call-template>
787	<xsl:value-of select="$prefix"/>
788	<xsl:call-template name="outputsysdnet">
789	<xsl:with-param name="netstring"
790	select="substring-after($netstring,'24')"/>
791	</xsl:call-template>
792	</xsl:when>
793	<xsl:when test="contains($netstring,'<Your Domain Name>')">
794	<xsl:call-template name="outputsysdnet">
795	<xsl:with-param name="netstring"
796	select="substring-before($netstring,'<Your Domain Name>')"/>
797	</xsl:call-template>
798	<xsl:value-of select="$domain"/>
799	<xsl:call-template name="outputsysdnet">
800	<xsl:with-param name="netstring"
801	select="substring-after($netstring,'<Your Domain Name>')"/>
802	</xsl:call-template>
803	</xsl:when>
804	<xsl:otherwise>
805	<xsl:value-of select="$netstring"/>
806	</xsl:otherwise>
807	</xsl:choose>
808	</xsl:template>
809
810	<xsl:template name="outputpkgdest">
811	<xsl:param name="outputstring" select="foo"/>
812	<xsl:choose>
813	<xsl:when test="contains($outputstring,'make ')">
814	<xsl:choose>
815	<xsl:when test="not(starts-with($outputstring,'make'))">
816	<xsl:call-template name="outputpkgdest">
817	<xsl:with-param name="outputstring"
818	select="substring-before($outputstring,'make')"/>
819	</xsl:call-template>
820	<xsl:call-template name="outputpkgdest">
821	<xsl:with-param
822	name="outputstring"
823	select="substring-after($outputstring,
824	substring-before($outputstring,'make'))"/>
825	</xsl:call-template>
826	</xsl:when>
827	<xsl:otherwise>
828	<xsl:choose>
829	<!-- special cases (no DESTDIR) here -->
830	<xsl:when test="ancestor::sect1[@id='ch-system-glibc']">
831	<xsl:text>make install_root=$PKG_DEST -j1</xsl:text>
832	<xsl:value-of
833	select="substring-before(substring-after(string(),'make'),
834	'install')"/>
835	<xsl:text>install </xsl:text>
836	</xsl:when>
837	<xsl:when test="ancestor::sect1[@id='ch-system-bzip2']">
838	<xsl:text>make PREFIX=$PKG_DEST/usr install </xsl:text>
839	</xsl:when>
840	<xsl:when test="ancestor::sect1[@id='ch-system-sysklogd']">
841	<xsl:text>make BINDIR=$PKG_DEST/sbin prefix=$PKG_DEST install </xsl:text>
842	</xsl:when>
843	<xsl:when test="ancestor::sect1[@id='ch-system-iproute2']">
844	<xsl:text>make DESTDIR=$PKG_DEST DOCDIR=</xsl:text>
845	<xsl:value-of
846	select="substring-before(substring-after(string(),'DOCDIR='),
847	'install')"/>
848	<xsl:text>install </xsl:text>
849	</xsl:when>
850	<xsl:when test="ancestor::sect1[@id='ch-system-sysvinit']">
851	<xsl:text>make ROOT=$PKG_DEST</xsl:text>
852	<xsl:value-of
853	select="substring-before(substring-after(string(),'make'),
854	'install')"/>
855	<xsl:text>install </xsl:text>
856	</xsl:when>
857	<xsl:when test="ancestor::sect1[@id='ch-bootable-kernel']">
858	<xsl:text>make INSTALL_MOD_PATH=$PKG_DEST</xsl:text>
859	<xsl:value-of
860	select="substring-before(substring-after(string(),'make'),
861	'install')"/>
862	<xsl:text>install </xsl:text>
863	</xsl:when>
864	<xsl:when test="ancestor::sect1[@id='ch-system-attr']">
865	<xsl:text>DIST_ROOT=$PKG_DEST make</xsl:text>
866	<xsl:call-template name="outputpkgdest">
867	<xsl:with-param name="outputstring"
868	select="substring-after($outputstring,'make')"/>
869	</xsl:call-template>
870	</xsl:when>
871	<xsl:otherwise>
872	<xsl:text>make DESTDIR=$PKG_DEST</xsl:text>
873	<xsl:call-template name="outputpkgdest">
874	<xsl:with-param
875	name="outputstring"
876	select="substring-after($outputstring,'make')"/>
877	</xsl:call-template>
878	</xsl:otherwise>
879	</xsl:choose>
880	</xsl:otherwise>
881	</xsl:choose>
882	</xsl:when>
883	<xsl:otherwise> <!-- no make in this string -->
884	<xsl:choose>
885	<xsl:when test="contains($outputstring,'>/') and
886	not(contains(substring-before($outputstring,'>/'),' /'))">
887	<xsl:value-of select="substring-before($outputstring,'>/')"/>
888	<xsl:text>>$PKG_DEST/</xsl:text>
889	<xsl:call-template name="outputpkgdest">
890	<xsl:with-param name="outputstring" select="substring-after($outputstring,'>/')"/>
891	</xsl:call-template>
892	</xsl:when>
893	<xsl:when test="contains($outputstring,' /')">
894	<xsl:value-of select="substring-before($outputstring,' /')"/>
895	<xsl:text> $PKG_DEST/</xsl:text>
896	<xsl:call-template name="outputpkgdest">
897	<xsl:with-param name="outputstring" select="substring-after($outputstring,' /')"/>
898	</xsl:call-template>
899	</xsl:when>
900	<xsl:otherwise>
901	<xsl:value-of select="$outputstring"/>
902	<xsl:text> </xsl:text>
903	</xsl:otherwise>
904	</xsl:choose>
905	</xsl:otherwise>
906	</xsl:choose>
907	</xsl:template>
908
909	<xsl:variable name="APOS">'</xsl:variable>
910	<xsl:template name="output-wrap">
911	<xsl:param name="commands" select="''"/>
912	<xsl:choose>
913	<xsl:when test="contains($commands,string($APOS))">
914	<xsl:call-template name="output-wrap">
915	<xsl:with-param name="commands"
916	select="substring-before($commands,string($APOS))"/>
917	</xsl:call-template>
918	<xsl:text>'\''</xsl:text>
919	<xsl:call-template name="output-wrap">
920	<xsl:with-param name="commands"
921	select="substring-after($commands,string($APOS))"/>
922	</xsl:call-template>
923	</xsl:when>
924	<xsl:otherwise>
925	<xsl:value-of select="$commands"/>
926	</xsl:otherwise>
927	</xsl:choose>
928	</xsl:template>
929
930	</xsl:stylesheet>

Note: See TracBrowser for help on using the repository browser.

Download in other formats: