source: LFS/lfs.xsl@ 33ff403

new_features
Last change on this file since 33ff403 was 33ff403, checked in by Pierre Labastie <pierre@…>, 8 years ago

Adapt IP GATEWAY to book instructions
  • Property mode set to 100644
File size: 29.8 KB
Line 
1<?xml version="1.0" encoding="ISO-8859-1"?>
2
3<!-- $Id$ -->
4
5<xsl:stylesheet
6 xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
7 xmlns:exsl="http://exslt.org/common"
8 extension-element-prefixes="exsl"
9 version="1.0">
10
11<!-- Parameters -->
12
13 <!-- use package management ?
14 n = no, original behavior
15 y = yes, add PKG_DEST to scripts in install commands of chapter06-08
16 -->
17 <xsl:param name="pkgmngt" select="n"/>
18
19 <!-- Run test suites?
20 0 = none
21 1 = only chapter06 critical testsuites
22 2 = all chapter06 testsuites
23 3 = all chapter05 and chapter06 testsuites
24 -->
25 <xsl:param name="testsuite" select="1"/>
26
27 <!-- Bomb on test suites failures?
28 n = no, I want to build the full system and review the logs
29 y = yes, bomb at the first test suite failure to can review the build dir
30 -->
31 <xsl:param name="bomb-testsuite" select="n"/>
32
33 <!-- Install vim-lang package? OBSOLETE should always be 'n'-->
34 <xsl:param name="vim-lang" select="n"/>
35
36 <!-- Time zone -->
37 <xsl:param name="timezone" select="GMT"/>
38
39 <!-- Page size -->
40 <xsl:param name="page" select="letter"/>
41
42 <!-- Locale settings -->
43 <xsl:param name="lang" select="C"/>
44
45 <!-- Install the whole set of locales -->
46 <xsl:param name='full-locale' select='n'/>
47
48 <!-- Hostname -->
49 <xsl:param name='hostname' select='"HOSTNAME"'/>
50
51 <!-- Network parameters: interface, ip, gateway, prefix, broadcast, domain
52 and nameservers -->
53 <xsl:param name='interface' select='eth0'/>
54 <xsl:param name='ip' select='"10.0.2.9"'/>
55 <xsl:param name='gateway' select='"10.0.2.2"'/>
56 <xsl:param name='prefix' select='24'/>
57 <xsl:param name='broadcast' select='"10.0.2.255"'/>
58 <xsl:param name='domain' select='"lfs.org"'/>
59 <xsl:param name='nameserver1' select='"10.0.2.3"'/>
60 <xsl:param name='nameserver2' select='"8.8.8.8"'/>
61
62<!-- End parameters -->
63
64 <xsl:template match="/">
65 <xsl:apply-templates select="//sect1"/>
66 </xsl:template>
67
68 <xsl:template match="sect1">
69 <xsl:if test="(../@id='chapter-temporary-tools' or
70 ../@id='chapter-building-system' or
71 ../@id='chapter-bootscripts' or
72 ../@id='chapter-bootable') and
73 count(descendant::screen/userinput) &gt; 0 and
74 count(descendant::screen/userinput) &gt;
75 count(descendant::screen[@role='nodump']) and
76 count(descendant::screen/userinput) &gt;
77 count(descendant::screen/userinput[starts-with(string(),'chroot')])">
78<!-- The last condition is a hack to allow previous versions of the
79 book where the chroot commands did not have role="nodump".
80 It only works if the chroot command is the only one on the page -->
81 <!-- The dirs names -->
82 <xsl:variable name="pi-dir" select="../processing-instruction('dbhtml')"/>
83 <xsl:variable name="pi-dir-value" select="substring-after($pi-dir,'dir=')"/>
84 <xsl:variable name="quote-dir" select="substring($pi-dir-value,1,1)"/>
85 <xsl:variable name="dirname" select="substring-before(substring($pi-dir-value,2),$quote-dir)"/>
86 <!-- The file names -->
87 <xsl:variable name="pi-file" select="processing-instruction('dbhtml')"/>
88 <xsl:variable name="pi-file-value" select="substring-after($pi-file,'filename=')"/>
89 <xsl:variable name="filename" select="substring-before(substring($pi-file-value,2),'.html')"/>
90 <!-- The build order -->
91 <xsl:variable name="position" select="position()"/>
92 <xsl:variable name="order">
93 <xsl:choose>
94 <xsl:when test="string-length($position) = 1">
95 <xsl:text>00</xsl:text>
96 <xsl:value-of select="$position"/>
97 </xsl:when>
98 <xsl:when test="string-length($position) = 2">
99 <xsl:text>0</xsl:text>
100 <xsl:value-of select="$position"/>
101 </xsl:when>
102 <xsl:otherwise>
103 <xsl:value-of select="$position"/>
104 </xsl:otherwise>
105 </xsl:choose>
106 </xsl:variable>
107 <!-- Inclusion of package manager scriptlets -->
108 <xsl:if test="@id='ch-tools-stripping' and $pkgmngt='y'">
109 <xsl:apply-templates
110 select="document('packageManager.xml')//sect1[contains(@id,'ch-tools')]"
111 mode="pkgmngt">
112 <xsl:with-param name="order" select="$order"/>
113 <xsl:with-param name="dirname" select="$dirname"/>
114 </xsl:apply-templates>
115 </xsl:if>
116 <xsl:if test="@id='ch-system-strippingagain' and $pkgmngt='y'">
117 <xsl:apply-templates
118 select="document('packageManager.xml')//sect1[contains(@id,'ch-system')]"
119 mode="pkgmngt">
120 <xsl:with-param name="order" select="$order"/>
121 <xsl:with-param name="dirname" select="$dirname"/>
122 </xsl:apply-templates>
123 </xsl:if>
124 <!-- Creating dirs and files -->
125 <exsl:document href="{$dirname}/{$order}-{$filename}" method="text">
126 <xsl:choose>
127 <xsl:when test="@id='ch-system-creatingdirs' or
128 @id='ch-system-createfiles' or
129 @id='ch-system-strippingagain'">
130 <xsl:text>#!/tools/bin/bash&#xA;set +h&#xA;</xsl:text>
131 </xsl:when>
132 <xsl:otherwise>
133 <xsl:text>#!/bin/bash&#xA;set +h&#xA;</xsl:text>
134 </xsl:otherwise>
135 </xsl:choose>
136 <xsl:if test="not(@id='ch-tools-stripping') and
137 not(@id='ch-system-strippingagain')">
138 <xsl:text>set -e&#xA;</xsl:text>
139 </xsl:if>
140 <xsl:text>&#xA;</xsl:text>
141 <xsl:if test="sect2[@role='installation']">
142 <xsl:text>cd $PKGDIR&#xA;</xsl:text>
143 </xsl:if>
144 <xsl:apply-templates select="sect2|
145 screen[not(@role) or
146 @role!='nodump']/userinput"/>
147 <xsl:if test="@id='ch-system-creatingdirs' and $pkgmngt='y'">
148 <xsl:apply-templates
149 select="document('packageManager.xml')//sect1[
150 @id='ch-pkgmngt-creatingdirs'
151 ]//userinput"
152 mode="pkgmngt"/>
153 </xsl:if>
154 <xsl:if test="@id='ch-system-createfiles' and $pkgmngt='y'">
155 <xsl:apply-templates
156 select="document('packageManager.xml')//sect1[
157 @id='ch-pkgmngt-createfiles'
158 ]//userinput"
159 mode="pkgmngt"/>
160 </xsl:if>
161 <xsl:text>echo -e "\n\nTotalseconds: $SECONDS\n"&#xA;</xsl:text>
162 <xsl:text>exit&#xA;</xsl:text>
163 </exsl:document>
164 </xsl:if>
165 </xsl:template>
166
167 <xsl:template match="sect2">
168 <xsl:apply-templates
169 select=".//screen[not(@role) or
170 @role != 'nodump']/userinput[
171 @remap = 'pre' or
172 @remap = 'configure' or
173 @remap = 'make' or
174 @remap = 'test' and
175 not(current()/../@id='ch-tools-dejagnu') and
176 not(current()/../@id='ch-system-systemd')]"/>
177 <xsl:if
178 test="ancestor::chapter[@id != 'chapter-temporary-tools'] and
179 $pkgmngt = 'y' and
180 descendant::screen[not(@role) or
181 @role != 'nodump']/userinput[
182 @remap='install']">
183 <xsl:text>mkdir -pv $PKG_DEST/{boot,etc,lib,bin,sbin}
184mkdir -pv $PKG_DEST/usr/{lib,bin,sbin,include}
185mkdir -pv $PKG_DEST/usr/share/{doc,info,man}
186mkdir -pv $PKG_DEST/usr/share/man/man{1..8}
187ln -sv share/{man,doc,info} $PKG_DEST/usr
188case $(uname -m) in
189 x86_64) ln -sv lib $PKG_DEST/lib64 &amp;&amp; ln -sv lib $PKG_DEST/usr/lib64 ;;
190esac
191</xsl:text>
192 </xsl:if>
193 <xsl:if test="../@id = 'ch-system-glibc' and
194 @role='installation' and
195 $pkgmngt = 'y'">
196 <xsl:text>mkdir -pv $PKG_DEST/usr/include/{rpc,rpcsvc}
197</xsl:text>
198 </xsl:if>
199 <xsl:apply-templates
200 select=".//screen[not(@role) or
201 @role != 'nodump']/userinput[@remap = 'install']"/>
202 <xsl:if test="ancestor::chapter[@id != 'chapter-temporary-tools'] and
203 $pkgmngt = 'y' and
204 descendant::screen[not(@role) or
205 @role != 'nodump']/userinput[
206 @remap='install']">
207 <xsl:if test="../@id = 'ch-system-man-pages'">
208<!-- these files are provided by the shadow package -->
209 <xsl:text>rm -fv $PKG_DEST/usr/share/man/{man3/getspnam.3,man5/passwd.5}
210</xsl:text>
211 </xsl:if>
212<!-- Attr man/man2 pages are already installed by man-pages. As of
213 March 2013, they are the same pages.
214 November 2015: now they are more accurate
215 in man-pages, and the man5 section is also in man-pages... -->
216 <xsl:if test="../@id = 'ch-system-attr'">
217 <xsl:text>rm -fv $PKG_DEST/usr/share/man/man2/*
218rm -fv $PKG_DEST/usr/share/man/man5/*
219</xsl:text>
220 </xsl:if>
221<!-- nologin is installed by util-linux. remove it from shadow -->
222 <xsl:if test="../@id = 'ch-system-shadow'">
223 <xsl:text>rm -fv $PKG_DEST/usr/share/man/man8/nologin.8
224rm -fv $PKG_DEST/sbin/nologin
225</xsl:text>
226 </xsl:if>
227 <xsl:text>rm -fv $PKG_DEST/{,usr/}lib64
228rm -fv $PKG_DEST/usr/{man,doc,info}
229for dir in $PKG_DEST/usr/share/man/man{1..8}; do
230 [[ -z $(ls $dir) ]] &amp;&amp; rmdir -v $dir
231done
232for dir in $PKG_DEST/usr/share/{doc,info,man}; do
233 [[ -z $(ls $dir) ]] &amp;&amp; rmdir -v $dir
234done
235for dir in $PKG_DEST/usr/{lib,bin,sbin,include}; do
236 [[ -z $(ls $dir) ]] &amp;&amp; rmdir -v $dir
237done
238for dir in $PKG_DEST/{boot,etc,lib,bin,sbin}; do
239 [[ -z $(ls $dir) ]] &amp;&amp; rmdir -v $dir
240done
241packInstall
242rm -rf $PKG_DEST
243</xsl:text>
244 </xsl:if>
245 <xsl:if test="$testsuite='3' and
246 ../@id='ch-tools-glibc' and
247 @role='installation'">
248 <xsl:copy-of select="//userinput[@remap='locale-test']"/>
249 <xsl:text>&#xA;</xsl:text>
250 </xsl:if>
251 <xsl:if test="../@id='ch-system-glibc' and @role='installation'">
252 <xsl:choose>
253 <xsl:when test="$full-locale='y'">
254 <xsl:copy-of select="//userinput[@remap='locale-full']"/>
255 <xsl:text>&#xA;</xsl:text>
256 </xsl:when>
257 <xsl:otherwise>
258 <xsl:copy-of select="//userinput[@remap='locale-test']"/>
259 <xsl:text>&#xA;</xsl:text>
260 <xsl:if test="not(contains(string(//userinput[@remap='locale-test']),$lang)) and $lang!='C' and $lang!='POSIX'">
261 <xsl:text>if LOCALE=`grep "</xsl:text>
262 <xsl:value-of select="$lang"/>
263 <xsl:text>/" $PKGDIR/localedata/SUPPORTED`; then
264 CHARMAP=`echo $LOCALE | sed 's,[^/]*/\([^ ]*\) [\],\1,'`
265 INPUT=`echo $LOCALE | sed 's,[/.].*,,'`
266 LOCALE=`echo $LOCALE | sed 's,/.*,,'`
267 localedef -i $INPUT -f $CHARMAP $LOCALE
268fi
269</xsl:text>
270 </xsl:if>
271 </xsl:otherwise>
272 </xsl:choose>
273 </xsl:if>
274 <xsl:apply-templates
275 select=".//screen[
276 not(@role) or
277 @role != 'nodump'
278 ]/userinput[
279 not(@remap) or
280 @remap='adjust' or
281 @remap='test' and current()/../@id='ch-tools-dejagnu' or
282 @remap='test' and current()/../@id='ch-system-systemd'
283 ]"/>
284 </xsl:template>
285
286 <xsl:template match="sect1" mode="pkgmngt">
287 <xsl:param name="dirname" select="chapter05"/>
288 <!-- The build order -->
289 <xsl:param name="order" select="062"/>
290<!-- The file names -->
291 <xsl:variable name="pi-file" select="processing-instruction('dbhtml')"/>
292 <xsl:variable name="pi-file-value" select="substring-after($pi-file,'filename=')"/>
293 <xsl:variable name="filename" select="substring-before(substring($pi-file-value,2),'.html')"/>
294 <!-- Creating dirs and files -->
295 <xsl:if test="count(descendant::screen/userinput) &gt; 0 and
296 count(descendant::screen/userinput) &gt;
297 count(descendant::screen[@role='nodump'])">
298 <exsl:document href="{$dirname}/{$order}-{position()}-{$filename}"
299 method="text">
300 <xsl:text>#!/bin/bash
301set +h
302set -e
303
304cd $PKGDIR
305</xsl:text>
306 <xsl:apply-templates
307 select=".//screen[not(@role) or
308 @role != 'nodump']/userinput[@remap != 'adjust']"
309 mode="pkgmngt"/>
310 <xsl:if test="$dirname = 'chapter06'">
311 <xsl:text>packInstall
312rm -rf $PKG_DEST
313</xsl:text>
314 </xsl:if>
315 <xsl:apply-templates
316 select=".//screen[not(@role) or
317 @role != 'nodump'
318 ]/userinput[not(@remap) or
319 @remap='adjust'
320 ]"
321 mode="pkgmngt"/>
322 <xsl:text>
323echo -e "\n\nTotalseconds: $SECONDS\n"
324exit
325</xsl:text>
326 </exsl:document>
327 </xsl:if>
328 </xsl:template>
329
330 <xsl:template match="userinput" mode="pkgmngt">
331 <xsl:apply-templates/>
332 <xsl:text>&#xA;</xsl:text>
333 </xsl:template>
334
335 <xsl:template match="userinput">
336 <xsl:choose>
337 <!-- Copying the kernel config file -->
338 <xsl:when test="string() = 'make mrproper'">
339 <xsl:text>make mrproper&#xA;</xsl:text>
340 <xsl:if test="ancestor::sect1[@id='ch-bootable-kernel']">
341 <xsl:text>cp -v ../kernel-config .config&#xA;</xsl:text>
342 </xsl:if>
343 </xsl:when>
344<!-- test instructions -->
345 <xsl:when test="@remap = 'test'">
346 <xsl:choose>
347 <xsl:when test="$testsuite = '0'"/>
348 <xsl:when test="$testsuite = '1' and
349 not(ancestor::sect1[@id='ch-system-gcc']) and
350 not(ancestor::sect1[@id='ch-system-glibc']) and
351 not(ancestor::sect1[@id='ch-system-gmp']) and
352 not(ancestor::sect1[@id='ch-system-mpfr']) and
353 not(ancestor::sect1[@id='ch-system-binutils'])"/>
354 <xsl:when test="$testsuite = '2' and
355 ancestor::chapter[@id='chapter-temporary-tools']"/>
356 <xsl:otherwise>
357 <xsl:choose>
358 <xsl:when test="$bomb-testsuite = 'n'">
359 <xsl:choose>
360 <!-- special case for glibc -->
361 <xsl:when test="contains(string(), 'glibc-check-log')">
362 <xsl:value-of
363 select="substring-before(string(),'2&gt;&amp;1')"/>
364 <xsl:text>&gt;&gt; $TEST_LOG 2&gt;&amp;1 || true&#xA;</xsl:text>
365 </xsl:when>
366 <!-- special case for procps-ng -->
367 <xsl:when test="contains(string(), 'pushd')">
368 <xsl:text>{ </xsl:text>
369 <xsl:apply-templates/>
370 <xsl:text>; } &gt;&gt; $TEST_LOG 2&gt;&amp;1 || true&#xA;</xsl:text>
371 </xsl:when>
372 <xsl:when test="contains(string(), 'make -k')">
373 <xsl:apply-templates/>
374 <xsl:text> &gt;&gt; $TEST_LOG 2&gt;&amp;1 || true&#xA;</xsl:text>
375 </xsl:when>
376 <xsl:when test="contains(string(), 'make')">
377 <xsl:value-of select="substring-before(string(),'make')"/>
378 <xsl:text>make -k</xsl:text>
379 <xsl:value-of select="substring-after(string(),'make')"/>
380 <xsl:text> &gt;&gt; $TEST_LOG 2&gt;&amp;1 || true&#xA;</xsl:text>
381 </xsl:when>
382 <xsl:otherwise>
383 <xsl:apply-templates/>
384 <xsl:if test="not(contains(string(), '&gt;&gt;'))">
385 <xsl:text> &gt;&gt; $TEST_LOG 2&gt;&amp;1</xsl:text>
386 </xsl:if>
387 <xsl:text>&#xA;</xsl:text>
388 </xsl:otherwise>
389 </xsl:choose>
390 </xsl:when>
391 <xsl:otherwise>
392 <!-- bomb-testsuite != 'n'-->
393 <xsl:choose>
394 <!-- special case for glibc -->
395 <xsl:when test="contains(string(), 'glibc-check-log')">
396 <xsl:value-of
397 select="substring-before(string(),'2&gt;&amp;1')"/>
398 <xsl:text>&gt;&gt; $TEST_LOG 2&gt;&amp;1 || true&#xA;</xsl:text>
399 </xsl:when>
400 <!-- special case for gmp -->
401 <xsl:when test="contains(string(), 'tee gmp-check-log')">
402 <xsl:text>(</xsl:text>
403 <xsl:apply-templates/>
404 <xsl:text>&gt;&gt; $TEST_LOG 2&gt;&amp;1 &amp;&amp; exit $PIPESTATUS)&#xA;</xsl:text>
405 </xsl:when>
406 <!-- special case for procps-ng -->
407 <xsl:when test="contains(string(), 'pushd')">
408 <xsl:text>{ </xsl:text>
409 <xsl:apply-templates/>
410 <xsl:text>; } &gt;&gt; $TEST_LOG 2&gt;&amp;1&#xA;</xsl:text>
411 </xsl:when>
412 <xsl:when test="contains(string(), 'make -k')">
413 <xsl:apply-templates/>
414 <xsl:text> &gt;&gt; $TEST_LOG 2&gt;&amp;1 || true&#xA;</xsl:text>
415 </xsl:when>
416 <xsl:otherwise>
417 <xsl:apply-templates/>
418 <xsl:if test="not(contains(string(), '&gt;&gt;'))">
419 <xsl:text> &gt;&gt; $TEST_LOG 2&gt;&amp;1</xsl:text>
420 </xsl:if>
421 <xsl:text>&#xA;</xsl:text>
422 </xsl:otherwise>
423 </xsl:choose>
424 </xsl:otherwise>
425 </xsl:choose>
426 </xsl:otherwise>
427 </xsl:choose>
428 </xsl:when>
429<!-- End of test instructions -->
430 <!-- Don't stop on strip run -->
431 <xsl:when test="contains(string(),'strip ')">
432 <xsl:apply-templates/>
433 <xsl:text> || true&#xA;</xsl:text>
434 </xsl:when>
435<!-- Package management -->
436<!-- Add $PKG_DEST to installation commands -->
437 <xsl:when test="@remap='install' and
438 not(ancestor::chapter[
439 @id='chapter-temporary-tools'
440 ])">
441 <xsl:choose>
442 <xsl:when test="$pkgmngt='n'">
443 <xsl:choose>
444 <xsl:when test="contains(string(),'firmware,udev')">
445 <xsl:text>if [[ ! -d /lib/udev/devices ]] ; then&#xA;</xsl:text>
446 <xsl:apply-templates/>
447 <xsl:text>&#xA;fi&#xA;</xsl:text>
448 </xsl:when>
449 <xsl:otherwise>
450 <xsl:apply-templates/>
451 <xsl:text>&#xA;</xsl:text>
452 </xsl:otherwise>
453 </xsl:choose>
454 </xsl:when>
455 <xsl:otherwise><!--pkgmngt = 'y'-->
456 <xsl:choose>
457 <xsl:when test="./literal">
458 <xsl:call-template name="outputpkgdest">
459 <xsl:with-param name="outputstring" select="text()[1]"/>
460 </xsl:call-template>
461 <xsl:apply-templates select="literal"/>
462 <xsl:call-template name="outputpkgdest">
463 <xsl:with-param name="outputstring" select="text()[2]"/>
464 </xsl:call-template>
465 </xsl:when>
466 <xsl:otherwise>
467 <xsl:call-template name="outputpkgdest">
468 <xsl:with-param name="outputstring" select="string()"/>
469 </xsl:call-template>
470 </xsl:otherwise>
471 </xsl:choose>
472 </xsl:otherwise>
473 </xsl:choose>
474 </xsl:when>
475 <!-- if package management, we should make an independant package for
476 tzdata. -->
477 <xsl:when test="contains(string(),'tzdata') and $pkgmngt='y'">
478 <xsl:text>
479OLD_PKG_DEST=$PKG_DEST
480OLD_PKGDIR=$PKGDIR
481PKG_DEST=$(dirname $OLD_PKG_DEST)/001-tzdata
482PKGDIR=$(dirname $PKGDIR)/tzdata-</xsl:text>
483 <xsl:copy-of select="substring-before(
484 substring-after(string(),'tzdata'),
485 '.tar')"/>
486 <xsl:text>
487</xsl:text>
488 <xsl:copy-of select="substring-before(string(),'ZONEINFO=')"/>
489 <xsl:text>ZONEINFO=$PKG_DEST</xsl:text>
490 <xsl:copy-of select="substring-after(string(),'ZONEINFO=')"/>
491 <xsl:text>
492packInstall
493rm -rf $PKG_DEST
494PKG_DEST=$OLD_PKG_DEST
495unset OLD_PKG_DEST
496PKGDIR=$OLD_PKGDIR
497unset OLD_PKGDIR
498</xsl:text>
499 </xsl:when><!-- addition for tzdata + package management -->
500 <!-- End addition for package management -->
501 <!-- The rest of commands -->
502 <xsl:otherwise>
503 <xsl:apply-templates/>
504 <xsl:text>&#xA;</xsl:text>
505 </xsl:otherwise>
506 </xsl:choose>
507 </xsl:template>
508
509 <xsl:template match="replaceable">
510 <xsl:choose>
511 <xsl:when test="ancestor::sect1[@id='ch-system-glibc']">
512 <xsl:value-of select="$timezone"/>
513 </xsl:when>
514 <xsl:when test="ancestor::sect1[@id='ch-system-groff']">
515 <xsl:value-of select="$page"/>
516 </xsl:when>
517 <xsl:when test="contains(string(.),'&lt;ll&gt;_&lt;CC&gt;')">
518 <xsl:value-of select="$lang"/>
519 </xsl:when>
520 <xsl:when test="contains(string(.),'Domain')">
521 <xsl:value-of select="$domain"/>
522 </xsl:when>
523 <xsl:when test="contains(string(.),'primary')">
524 <xsl:value-of select="$nameserver1"/>
525 </xsl:when>
526 <xsl:when test="contains(string(.),'secondary')">
527 <xsl:value-of select="$nameserver2"/>
528 </xsl:when>
529 <xsl:when test="contains(string(.),'192.168.1.1')">
530 <xsl:value-of select="$ip"/>
531 </xsl:when>
532 <xsl:when test="contains(string(.),'HOSTNAME')">
533 <xsl:value-of select="$hostname"/>
534 <xsl:text>.</xsl:text>
535 <xsl:value-of select="$domain"/>
536 </xsl:when>
537 <xsl:when test="contains(string(.),'alias')">
538 <xsl:value-of select="$hostname"/>
539 </xsl:when>
540 <xsl:when test="contains(string(.),'&lt;lfs&gt;')">
541 <xsl:value-of select="$hostname"/>
542 </xsl:when>
543 <xsl:otherwise>
544 <xsl:text>**EDITME</xsl:text>
545 <xsl:apply-templates/>
546 <xsl:text>EDITME**</xsl:text>
547 </xsl:otherwise>
548 </xsl:choose>
549 </xsl:template>
550
551 <xsl:template match="literal">
552 <xsl:choose>
553 <xsl:when test="contains(string(),'ONBOOT')">
554 <xsl:call-template name="outputnet">
555 <xsl:with-param name="netstring" select="string()"/>
556 </xsl:call-template>
557 </xsl:when>
558 <xsl:otherwise>
559 <xsl:apply-templates/>
560 </xsl:otherwise>
561 </xsl:choose>
562 </xsl:template>
563
564 <xsl:template name="outputnet">
565 <xsl:param name="netstring" select="''"/>
566 <!-- We suppose that book example has the following values:
567 - interface: eth0
568 - ip: 192.168.1.2
569 - gateway: 192.168.1.1
570 - prefix: 24
571 - broadcast: 192.168.1.255
572 Change below if book changes -->
573 <xsl:choose>
574 <xsl:when test="contains($netstring,'eth0')">
575 <xsl:call-template name="outputnet">
576 <xsl:with-param name="netstring"
577 select="substring-before($netstring,'eth0')"/>
578 </xsl:call-template>
579 <xsl:value-of select="$interface"/>
580 <xsl:call-template name="outputnet">
581 <xsl:with-param name="netstring"
582 select="substring-after($netstring,'eth0')"/>
583 </xsl:call-template>
584 </xsl:when>
585 <xsl:when test="contains($netstring,'192.168.1.1')">
586 <xsl:call-template name="outputnet">
587 <xsl:with-param name="netstring"
588 select="substring-before($netstring,'192.168.1.1')"/>
589 </xsl:call-template>
590 <xsl:value-of select="$gateway"/>
591 <xsl:call-template name="outputnet">
592 <xsl:with-param name="netstring"
593 select="substring-after($netstring,'192.168.1.1')"/>
594 </xsl:call-template>
595 </xsl:when>
596 <!-- must test this before the following, because 192.168.1.255 contains
597 192.168.1.2! -->
598 <xsl:when test="contains($netstring,'192.168.1.255')">
599 <xsl:call-template name="outputnet">
600 <xsl:with-param name="netstring"
601 select="substring-before($netstring,'192.168.1.255')"/>
602 </xsl:call-template>
603 <xsl:value-of select="$broadcast"/>
604 <xsl:call-template name="outputnet">
605 <xsl:with-param name="netstring"
606 select="substring-after($netstring,'192.168.1.255')"/>
607 </xsl:call-template>
608 </xsl:when>
609 <xsl:when test="contains($netstring,'192.168.1.2')">
610 <xsl:call-template name="outputnet">
611 <xsl:with-param name="netstring"
612 select="substring-before($netstring,'192.168.1.2')"/>
613 </xsl:call-template>
614 <xsl:value-of select="$ip"/>
615 <xsl:call-template name="outputnet">
616 <xsl:with-param name="netstring"
617 select="substring-after($netstring,'192.168.1.2')"/>
618 </xsl:call-template>
619 </xsl:when>
620 <xsl:when test="contains($netstring,'24')">
621 <xsl:call-template name="outputnet">
622 <xsl:with-param name="netstring"
623 select="substring-before($netstring,'24')"/>
624 </xsl:call-template>
625 <xsl:value-of select="$prefix"/>
626 <xsl:call-template name="outputnet">
627 <xsl:with-param name="netstring"
628 select="substring-after($netstring,'24')"/>
629 </xsl:call-template>
630 </xsl:when>
631 <xsl:otherwise>
632 <xsl:value-of select="$netstring"/>
633 </xsl:otherwise>
634 </xsl:choose>
635 </xsl:template>
636
637 <xsl:template name="outputpkgdest">
638 <xsl:param name="outputstring" select="foo"/>
639 <xsl:choose>
640 <xsl:when test="contains($outputstring,'make ')">
641 <xsl:choose>
642 <xsl:when test="not(starts-with($outputstring,'make'))">
643 <xsl:call-template name="outputpkgdest">
644 <xsl:with-param name="outputstring"
645 select="substring-before($outputstring,'make')"/>
646 </xsl:call-template>
647 <xsl:call-template name="outputpkgdest">
648 <xsl:with-param
649 name="outputstring"
650 select="substring-after($outputstring,
651 substring-before($outputstring,'make'))"/>
652 </xsl:call-template>
653 </xsl:when>
654 <xsl:otherwise>
655 <xsl:choose>
656<!-- special cases (no DESTDIR) here -->
657 <xsl:when test="ancestor::sect1[@id='ch-system-glibc']">
658 <xsl:text>make install_root=$PKG_DEST -j1</xsl:text>
659 <xsl:value-of
660 select="substring-before(substring-after(string(),'make'),
661 'install')"/>
662 <xsl:text>install&#xA;</xsl:text>
663 </xsl:when>
664 <xsl:when test="ancestor::sect1[@id='ch-system-bzip2']">
665 <xsl:text>make PREFIX=$PKG_DEST/usr install&#xA;</xsl:text>
666 </xsl:when>
667 <xsl:when test="ancestor::sect1[@id='ch-system-sysklogd']">
668 <xsl:text>make BINDIR=$PKG_DEST/sbin prefix=$PKG_DEST install&#xA;</xsl:text>
669 </xsl:when>
670 <xsl:when test="ancestor::sect1[@id='ch-system-iproute2']">
671 <xsl:text>make DESTDIR=$PKG_DEST DOCDIR=</xsl:text>
672 <xsl:value-of
673 select="substring-before(substring-after(string(),'DOCDIR='),
674 'install')"/>
675 <xsl:text>install&#xA;</xsl:text>
676 </xsl:when>
677 <xsl:when test="ancestor::sect1[@id='ch-system-sysvinit']">
678 <xsl:text>make ROOT=$PKG_DEST</xsl:text>
679 <xsl:value-of
680 select="substring-before(substring-after(string(),'make'),
681 'install')"/>
682 <xsl:text>install&#xA;</xsl:text>
683 </xsl:when>
684 <xsl:when test="ancestor::sect1[@id='ch-bootable-kernel']">
685 <xsl:text>make INSTALL_MOD_PATH=$PKG_DEST</xsl:text>
686 <xsl:value-of
687 select="substring-before(substring-after(string(),'make'),
688 'install')"/>
689 <xsl:text>install&#xA;</xsl:text>
690 </xsl:when>
691 <xsl:when test="ancestor::sect1[@id='ch-system-attr']">
692 <xsl:text>DIST_ROOT=$PKG_DEST make</xsl:text>
693 <xsl:call-template name="outputpkgdest">
694 <xsl:with-param name="outputstring"
695 select="substring-after($outputstring,'make')"/>
696 </xsl:call-template>
697 </xsl:when>
698 <xsl:otherwise>
699 <xsl:text>make DESTDIR=$PKG_DEST</xsl:text>
700 <xsl:call-template name="outputpkgdest">
701 <xsl:with-param
702 name="outputstring"
703 select="substring-after($outputstring,'make')"/>
704 </xsl:call-template>
705 </xsl:otherwise>
706 </xsl:choose>
707 </xsl:otherwise>
708 </xsl:choose>
709 </xsl:when>
710 <xsl:otherwise> <!-- no make in this string -->
711 <xsl:choose>
712 <xsl:when test="contains($outputstring,'&gt;/') and
713 not(contains(substring-before($outputstring,'&gt;/'),' /'))">
714 <xsl:value-of select="substring-before($outputstring,'&gt;/')"/>
715 <xsl:text>&gt;$PKG_DEST/</xsl:text>
716 <xsl:call-template name="outputpkgdest">
717 <xsl:with-param name="outputstring" select="substring-after($outputstring,'&gt;/')"/>
718 </xsl:call-template>
719 </xsl:when>
720 <xsl:when test="contains($outputstring,' /')">
721 <xsl:value-of select="substring-before($outputstring,' /')"/>
722 <xsl:text> $PKG_DEST/</xsl:text>
723 <xsl:call-template name="outputpkgdest">
724 <xsl:with-param name="outputstring" select="substring-after($outputstring,' /')"/>
725 </xsl:call-template>
726 </xsl:when>
727 <xsl:otherwise>
728 <xsl:value-of select="$outputstring"/>
729 <xsl:text>&#xA;</xsl:text>
730 </xsl:otherwise>
731 </xsl:choose>
732 </xsl:otherwise>
733 </xsl:choose>
734 </xsl:template>
735</xsl:stylesheet>
Note: See TracBrowser for help on using the repository browser.