source: LFS/lfs.xsl@ b9c3497

2.4 ablfs-more legacy new_features trunk
Last change on this file since b9c3497 was 57ef0c1, checked in by Pierre Labastie <pierre@…>, 10 years ago

Package tzdata separately when using package management
  • Property mode set to 100644
File size: 24.6 KB
Line 
1<?xml version="1.0" encoding="ISO-8859-1"?>
2
3<!-- $Id$ -->
4
5<xsl:stylesheet
6 xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
7 xmlns:exsl="http://exslt.org/common"
8 extension-element-prefixes="exsl"
9 version="1.0">
10
11 <!-- use package management ?
12 n = no, original behavior
13 y = yes, add PKG_DEST to scripts in install commands of chapter06-08
14 -->
15 <xsl:param name="pkgmngt" select="n"/>
16
17 <!-- Run test suites?
18 0 = none
19 1 = only chapter06 Glibc, GCC and Binutils testsuites
20 2 = all chapter06 testsuites
21 3 = all chapter05 and chapter06 testsuites
22 -->
23 <xsl:param name="testsuite" select="1"/>
24
25 <!-- Bomb on test suites failures?
26 n = no, I want to build the full system and review the logs
27 y = yes, bomb at the first test suite failure to can review the build dir
28 -->
29 <xsl:param name="bomb-testsuite" select="n"/>
30
31 <!-- Install vim-lang package? OBSOLETE should always be 'n'-->
32 <xsl:param name="vim-lang" select="n"/>
33
34 <!-- Time zone -->
35 <xsl:param name="timezone" select="GMT"/>
36
37 <!-- Page size -->
38 <xsl:param name="page" select="letter"/>
39
40 <!-- Locale settings -->
41 <xsl:param name="lang" select="C"/>
42
43 <!-- Install the whole set of locales -->
44 <xsl:param name='full-locale' select='n'/>
45
46 <xsl:template match="/">
47 <xsl:apply-templates select="//sect1"/>
48 </xsl:template>
49
50 <xsl:template match="sect1">
51 <xsl:if test="(../@id='chapter-temporary-tools' or
52 ../@id='chapter-building-system' or
53 ../@id='chapter-bootscripts' or
54 ../@id='chapter-bootable') and
55 count(descendant::screen/userinput) &gt; 0 and
56 count(descendant::screen/userinput) &gt;
57 count(descendant::screen[@role='nodump']) and
58 count(descendant::screen/userinput) &gt;
59 count(descendant::screen/userinput[starts-with(string(),'chroot')])">
60<!-- The last condition is a hack to allow previous versions of the
61 book where the chroot commands did not have role="nodump".
62 It only works if the chroot command is the only one on the page -->
63 <!-- The dirs names -->
64 <xsl:variable name="pi-dir" select="../processing-instruction('dbhtml')"/>
65 <xsl:variable name="pi-dir-value" select="substring-after($pi-dir,'dir=')"/>
66 <xsl:variable name="quote-dir" select="substring($pi-dir-value,1,1)"/>
67 <xsl:variable name="dirname" select="substring-before(substring($pi-dir-value,2),$quote-dir)"/>
68 <!-- The file names -->
69 <xsl:variable name="pi-file" select="processing-instruction('dbhtml')"/>
70 <xsl:variable name="pi-file-value" select="substring-after($pi-file,'filename=')"/>
71 <xsl:variable name="filename" select="substring-before(substring($pi-file-value,2),'.html')"/>
72 <!-- The build order -->
73 <xsl:variable name="position" select="position()"/>
74 <xsl:variable name="order">
75 <xsl:choose>
76 <xsl:when test="string-length($position) = 1">
77 <xsl:text>00</xsl:text>
78 <xsl:value-of select="$position"/>
79 </xsl:when>
80 <xsl:when test="string-length($position) = 2">
81 <xsl:text>0</xsl:text>
82 <xsl:value-of select="$position"/>
83 </xsl:when>
84 <xsl:otherwise>
85 <xsl:value-of select="$position"/>
86 </xsl:otherwise>
87 </xsl:choose>
88 </xsl:variable>
89 <!-- Inclusion of package manager scriptlets -->
90 <xsl:if test="@id='ch-tools-stripping' and $pkgmngt='y'">
91 <xsl:apply-templates
92 select="document('packageManager.xml')//sect1[contains(@id,'ch-tools')]"
93 mode="pkgmngt">
94 <xsl:with-param name="order" select="$order"/>
95 <xsl:with-param name="dirname" select="$dirname"/>
96 </xsl:apply-templates>
97 </xsl:if>
98 <xsl:if test="@id='ch-system-strippingagain' and $pkgmngt='y'">
99 <xsl:apply-templates
100 select="document('packageManager.xml')//sect1[contains(@id,'ch-system')]"
101 mode="pkgmngt">
102 <xsl:with-param name="order" select="$order"/>
103 <xsl:with-param name="dirname" select="$dirname"/>
104 </xsl:apply-templates>
105 </xsl:if>
106 <!-- Creating dirs and files -->
107 <exsl:document href="{$dirname}/{$order}-{$filename}" method="text">
108 <xsl:choose>
109 <xsl:when test="@id='ch-system-creatingdirs' or
110 @id='ch-system-createfiles' or
111 @id='ch-system-strippingagain'">
112 <xsl:text>#!/tools/bin/bash&#xA;set +h&#xA;</xsl:text>
113 </xsl:when>
114 <xsl:otherwise>
115 <xsl:text>#!/bin/bash&#xA;set +h&#xA;</xsl:text>
116 </xsl:otherwise>
117 </xsl:choose>
118 <xsl:if test="not(@id='ch-tools-stripping') and
119 not(@id='ch-system-strippingagain')">
120 <xsl:text>set -e&#xA;</xsl:text>
121 </xsl:if>
122 <xsl:text>&#xA;</xsl:text>
123 <xsl:if test="sect2[@role='installation']">
124 <xsl:text>cd $PKGDIR&#xA;</xsl:text>
125 </xsl:if>
126 <xsl:apply-templates select="sect2|
127 screen[not(@role) or
128 @role!='nodump']/userinput"/>
129 <xsl:if test="@id='ch-system-creatingdirs' and $pkgmngt='y'">
130 <xsl:apply-templates
131 select="document('packageManager.xml')//sect1[
132 @id='ch-pkgmngt-creatingdirs'
133 ]//userinput"
134 mode="pkgmngt"/>
135 </xsl:if>
136 <xsl:if test="@id='ch-system-createfiles' and $pkgmngt='y'">
137 <xsl:apply-templates
138 select="document('packageManager.xml')//sect1[
139 @id='ch-pkgmngt-createfiles'
140 ]//userinput"
141 mode="pkgmngt"/>
142 </xsl:if>
143 <xsl:text>echo -e "\n\nTotalseconds: $SECONDS\n"&#xA;</xsl:text>
144 <xsl:text>exit&#xA;</xsl:text>
145 </exsl:document>
146 </xsl:if>
147 </xsl:template>
148
149 <xsl:template match="sect2">
150 <xsl:apply-templates
151 select=".//screen[not(@role) or
152 @role != 'nodump']/userinput[
153 @remap = 'pre' or
154 @remap = 'configure' or
155 @remap = 'make' or
156 @remap = 'test' and
157 not(current()/../@id='ch-tools-dejagnu')]"/>
158 <xsl:if
159 test="ancestor::chapter[@id != 'chapter-temporary-tools'] and
160 $pkgmngt = 'y' and
161 descendant::screen[not(@role) or
162 @role != 'nodump']/userinput[
163 @remap='install']">
164 <xsl:text>mkdir -pv $PKG_DEST/{boot,etc,lib,bin,sbin}
165mkdir -pv $PKG_DEST/usr/{lib,bin,sbin,include}
166mkdir -pv $PKG_DEST/usr/share/{doc,info,man}
167mkdir -pv $PKG_DEST/usr/share/man/man{1..8}
168ln -sv share/{man,doc,info} $PKG_DEST/usr
169case $(uname -m) in
170 x86_64) ln -sv lib $PKG_DEST/lib64 &amp;&amp; ln -sv lib $PKG_DEST/usr/lib64 ;;
171esac
172</xsl:text>
173 </xsl:if>
174 <xsl:if test="../@id = 'ch-system-glibc' and
175 @role='installation' and
176 $pkgmngt = 'y'">
177 <xsl:text>mkdir -pv $PKG_DEST/usr/include/{rpc,rpcsvc}
178</xsl:text>
179 </xsl:if>
180 <xsl:apply-templates
181 select=".//screen[not(@role) or
182 @role != 'nodump']/userinput[@remap = 'install']"/>
183 <xsl:if test="ancestor::chapter[@id != 'chapter-temporary-tools'] and
184 $pkgmngt = 'y' and
185 descendant::screen[not(@role) or
186 @role != 'nodump']/userinput[
187 @remap='install']">
188 <xsl:if test="../@id = 'ch-system-man-pages'">
189<!-- these files are provided by the shadow package -->
190 <xsl:text>rm -fv $PKG_DEST/usr/share/man/{man3/getspnam.3,man5/passwd.5}
191</xsl:text>
192 </xsl:if>
193<!-- Attr man/man2 pages are already installed by man-pages. As of
194 March 2013, they are the same pages. Check it sometimes... -->
195 <xsl:if test="../@id = 'ch-system-attr'">
196 <xsl:text>rm -fv $PKG_DEST/usr/share/man/man2/*
197</xsl:text>
198 </xsl:if>
199<!-- nologin is installed by util-linux. remove it from shadow -->
200 <xsl:if test="../@id = 'ch-system-shadow'">
201 <xsl:text>rm -fv $PKG_DEST/usr/share/man/man8/nologin.8
202rm -fv $PKG_DEST/sbin/nologin
203</xsl:text>
204 </xsl:if>
205 <xsl:text>rm -fv $PKG_DEST/{,usr/}lib64
206rm -fv $PKG_DEST/usr/{man,doc,info}
207for dir in $PKG_DEST/usr/share/man/man{1..8}; do
208 [[ -z $(ls $dir) ]] &amp;&amp; rmdir -v $dir
209done
210for dir in $PKG_DEST/usr/share/{doc,info,man}; do
211 [[ -z $(ls $dir) ]] &amp;&amp; rmdir -v $dir
212done
213for dir in $PKG_DEST/usr/{lib,bin,sbin,include}; do
214 [[ -z $(ls $dir) ]] &amp;&amp; rmdir -v $dir
215done
216for dir in $PKG_DEST/{boot,etc,lib,bin,sbin}; do
217 [[ -z $(ls $dir) ]] &amp;&amp; rmdir -v $dir
218done
219packInstall
220rm -rf $PKG_DEST
221</xsl:text>
222 </xsl:if>
223 <xsl:if test="$testsuite='3' and
224 ../@id='ch-tools-glibc' and
225 @role='installation'">
226 <xsl:copy-of select="//userinput[@remap='locale-test']"/>
227 <xsl:text>&#xA;</xsl:text>
228 </xsl:if>
229 <xsl:if test="../@id='ch-system-glibc' and @role='installation'">
230 <xsl:choose>
231 <xsl:when test="$full-locale='y'">
232 <xsl:copy-of select="//userinput[@remap='locale-full']"/>
233 <xsl:text>&#xA;</xsl:text>
234 </xsl:when>
235 <xsl:otherwise>
236 <xsl:copy-of select="//userinput[@remap='locale-test']"/>
237 <xsl:text>&#xA;</xsl:text>
238 <xsl:if test="not(contains(string(//userinput[@remap='locale-test']),$lang)) and $lang!='C' and $lang!='POSIX'">
239 <xsl:text>if LOCALE=`grep "</xsl:text>
240 <xsl:value-of select="$lang"/>
241 <xsl:text>/" $PKGDIR/localedata/SUPPORTED`; then
242 CHARMAP=`echo $LOCALE | sed 's,[^/]*/\([^ ]*\) [\],\1,'`
243 INPUT=`echo $LOCALE | sed 's,[/.].*,,'`
244 LOCALE=`echo $LOCALE | sed 's,/.*,,'`
245 localedef -i $INPUT -f $CHARMAP $LOCALE
246fi
247</xsl:text>
248 </xsl:if>
249 </xsl:otherwise>
250 </xsl:choose>
251 </xsl:if>
252 <xsl:apply-templates
253 select=".//screen[
254 not(@role) or
255 @role != 'nodump'
256 ]/userinput[
257 not(@remap) or
258 @remap='adjust' or
259 @remap='test' and current()/../@id='ch-tools-dejagnu'
260 ]"/>
261 </xsl:template>
262
263 <xsl:template match="sect1" mode="pkgmngt">
264 <xsl:param name="dirname" select="chapter05"/>
265 <!-- The build order -->
266 <xsl:param name="order" select="062"/>
267<!-- The file names -->
268 <xsl:variable name="pi-file" select="processing-instruction('dbhtml')"/>
269 <xsl:variable name="pi-file-value" select="substring-after($pi-file,'filename=')"/>
270 <xsl:variable name="filename" select="substring-before(substring($pi-file-value,2),'.html')"/>
271 <!-- Creating dirs and files -->
272 <xsl:if test="count(descendant::screen/userinput) &gt; 0 and
273 count(descendant::screen/userinput) &gt;
274 count(descendant::screen[@role='nodump'])">
275 <exsl:document href="{$dirname}/{$order}-{position()}-{$filename}"
276 method="text">
277 <xsl:text>#!/bin/bash
278set +h
279set -e
280
281cd $PKGDIR
282</xsl:text>
283 <xsl:apply-templates
284 select=".//screen[not(@role) or
285 @role != 'nodump']/userinput[@remap != 'adjust']"
286 mode="pkgmngt"/>
287 <xsl:if test="$dirname = 'chapter06'">
288 <xsl:text>packInstall
289rm -rf $PKG_DEST
290</xsl:text>
291 </xsl:if>
292 <xsl:apply-templates
293 select=".//screen[not(@role) or
294 @role != 'nodump'
295 ]/userinput[not(@remap) or
296 @remap='adjust'
297 ]"
298 mode="pkgmngt"/>
299 <xsl:text>
300echo -e "\n\nTotalseconds: $SECONDS\n"
301exit
302</xsl:text>
303 </exsl:document>
304 </xsl:if>
305 </xsl:template>
306
307 <xsl:template match="userinput" mode="pkgmngt">
308 <xsl:apply-templates/>
309 <xsl:text>&#xA;</xsl:text>
310 </xsl:template>
311
312 <xsl:template match="userinput">
313 <xsl:choose>
314 <!-- Copying the kernel config file -->
315 <xsl:when test="string() = 'make mrproper'">
316 <xsl:text>make mrproper&#xA;</xsl:text>
317 <xsl:if test="ancestor::sect1[@id='ch-bootable-kernel']">
318 <xsl:text>cp -v ../kernel-config .config&#xA;</xsl:text>
319 </xsl:if>
320 </xsl:when>
321<!-- test instructions -->
322 <xsl:when test="@remap = 'test'">
323 <xsl:choose>
324 <xsl:when test="$testsuite = '0'"/>
325 <xsl:when test="$testsuite = '1' and
326 not(ancestor::sect1[@id='ch-system-gcc']) and
327 not(ancestor::sect1[@id='ch-system-glibc']) and
328 not(ancestor::sect1[@id='ch-system-gmp']) and
329 not(ancestor::sect1[@id='ch-system-mpfr']) and
330 not(ancestor::sect1[@id='ch-system-binutils'])"/>
331 <xsl:when test="$testsuite = '2' and
332 ancestor::chapter[@id='chapter-temporary-tools']"/>
333 <xsl:otherwise>
334 <xsl:choose>
335 <xsl:when test="$bomb-testsuite = 'n'">
336 <xsl:choose>
337 <!-- special case for glibc -->
338 <xsl:when test="contains(string(), 'glibc-check-log')">
339 <xsl:value-of
340 select="substring-before(string(),'2&gt;&amp;1')"/>
341 <xsl:text>&gt;&gt; $TEST_LOG 2&gt;&amp;1 || true&#xA;</xsl:text>
342 </xsl:when>
343 <!-- special case for procps-ng -->
344 <xsl:when test="contains(string(), 'pushd')">
345 <xsl:text>{ </xsl:text>
346 <xsl:apply-templates/>
347 <xsl:text>; } &gt;&gt; $TEST_LOG 2&gt;&amp;1 || true&#xA;</xsl:text>
348 </xsl:when>
349 <xsl:when test="contains(string(), 'make -k')">
350 <xsl:apply-templates/>
351 <xsl:text> &gt;&gt; $TEST_LOG 2&gt;&amp;1 || true&#xA;</xsl:text>
352 </xsl:when>
353 <xsl:when test="contains(string(), 'make')">
354 <xsl:value-of select="substring-before(string(),'make')"/>
355 <xsl:text>make -k</xsl:text>
356 <xsl:value-of select="substring-after(string(),'make')"/>
357 <xsl:text> &gt;&gt; $TEST_LOG 2&gt;&amp;1 || true&#xA;</xsl:text>
358 </xsl:when>
359 <xsl:otherwise>
360 <xsl:apply-templates/>
361 <xsl:if test="not(contains(string(), '&gt;&gt;'))">
362 <xsl:text> &gt;&gt; $TEST_LOG 2&gt;&amp;1</xsl:text>
363 </xsl:if>
364 <xsl:text>&#xA;</xsl:text>
365 </xsl:otherwise>
366 </xsl:choose>
367 </xsl:when>
368 <xsl:otherwise>
369 <!-- bomb-testsuite != 'n'-->
370 <xsl:choose>
371 <!-- special case for glibc -->
372 <xsl:when test="contains(string(), 'glibc-check-log')">
373 <xsl:value-of
374 select="substring-before(string(),'2&gt;&amp;1')"/>
375 <xsl:text>&gt;&gt; $TEST_LOG 2&gt;&amp;1 || true&#xA;</xsl:text>
376 </xsl:when>
377 <!-- special case for gmp -->
378 <xsl:when test="contains(string(), 'tee gmp-check-log')">
379 <xsl:text>(</xsl:text>
380 <xsl:apply-templates/>
381 <xsl:text>&gt;&gt; $TEST_LOG 2&gt;&amp;1 &amp;&amp; exit $PIPESTATUS)&#xA;</xsl:text>
382 </xsl:when>
383 <!-- special case for procps-ng -->
384 <xsl:when test="contains(string(), 'pushd')">
385 <xsl:text>{ </xsl:text>
386 <xsl:apply-templates/>
387 <xsl:text>; } &gt;&gt; $TEST_LOG 2&gt;&amp;1&#xA;</xsl:text>
388 </xsl:when>
389 <xsl:when test="contains(string(), 'make -k')">
390 <xsl:apply-templates/>
391 <xsl:text> &gt;&gt; $TEST_LOG 2&gt;&amp;1 || true&#xA;</xsl:text>
392 </xsl:when>
393 <xsl:otherwise>
394 <xsl:apply-templates/>
395 <xsl:if test="not(contains(string(), '&gt;&gt;'))">
396 <xsl:text> &gt;&gt; $TEST_LOG 2&gt;&amp;1</xsl:text>
397 </xsl:if>
398 <xsl:text>&#xA;</xsl:text>
399 </xsl:otherwise>
400 </xsl:choose>
401 </xsl:otherwise>
402 </xsl:choose>
403 </xsl:otherwise>
404 </xsl:choose>
405 </xsl:when>
406<!-- End of test instructions -->
407 <!-- Don't stop on strip run -->
408 <xsl:when test="contains(string(),'strip ')">
409 <xsl:apply-templates/>
410 <xsl:text> || true&#xA;</xsl:text>
411 </xsl:when>
412<!-- Package management -->
413<!-- Add $PKG_DEST to installation commands -->
414 <xsl:when test="@remap='install' and
415 not(ancestor::chapter[
416 @id='chapter-temporary-tools'
417 ])">
418 <xsl:choose>
419 <xsl:when test="$pkgmngt='n'">
420 <xsl:choose>
421 <xsl:when test="contains(string(),'firmware,udev')">
422 <xsl:text>if [[ ! -d /lib/udev/devices ]] ; then&#xA;</xsl:text>
423 <xsl:apply-templates/>
424 <xsl:text>&#xA;fi&#xA;</xsl:text>
425 </xsl:when>
426 <xsl:otherwise>
427 <xsl:apply-templates/>
428 <xsl:text>&#xA;</xsl:text>
429 </xsl:otherwise>
430 </xsl:choose>
431 </xsl:when>
432 <xsl:otherwise><!--pkgmngt = 'y'-->
433 <xsl:choose>
434 <xsl:when test="./literal">
435 <xsl:call-template name="outputpkgdest">
436 <xsl:with-param name="outputstring" select="text()[1]"/>
437 </xsl:call-template>
438 <xsl:apply-templates select="literal"/>
439 <xsl:call-template name="outputpkgdest">
440 <xsl:with-param name="outputstring" select="text()[2]"/>
441 </xsl:call-template>
442 </xsl:when>
443 <xsl:otherwise>
444 <xsl:call-template name="outputpkgdest">
445 <xsl:with-param name="outputstring" select="string()"/>
446 </xsl:call-template>
447 </xsl:otherwise>
448 </xsl:choose>
449 </xsl:otherwise>
450 </xsl:choose>
451 </xsl:when>
452 <!-- if package management, we should make an independant package for
453 tzdata. -->
454 <xsl:when test="contains(string(),'tzdata') and $pkgmngt='y'">
455 <xsl:text>
456OLD_PKG_DEST=$PKG_DEST
457OLD_PKGDIR=$PKGDIR
458PKG_DEST=$(dirname $OLD_PKG_DEST)/tzdata
459PKGDIR=$(dirname $PKGDIR)/tzdata-</xsl:text>
460 <xsl:copy-of select="substring-before(
461 substring-after(string(),'tzdata'),
462 '.tar')"/>
463 <xsl:text>
464</xsl:text>
465 <xsl:copy-of select="substring-before(string(),'ZONEINFO=')"/>
466 <xsl:text>ZONEINFO=$PKG_DEST</xsl:text>
467 <xsl:copy-of select="substring-after(string(),'ZONEINFO=')"/>
468 <xsl:text>
469packInstall
470rm -rf $PKG_DEST
471PKG_DEST=$OLD_PKG_DEST
472unset OLD_PKG_DEST
473PKGDIR=$OLD_PKGDIR
474unset OLD_PKGDIR
475</xsl:text>
476 </xsl:when><!-- addition for tzdata + package management -->
477 <!-- End addition for package management -->
478 <!-- The rest of commands -->
479 <xsl:otherwise>
480 <xsl:apply-templates/>
481 <xsl:text>&#xA;</xsl:text>
482 </xsl:otherwise>
483 </xsl:choose>
484 </xsl:template>
485
486 <xsl:template match="replaceable">
487 <xsl:choose>
488 <xsl:when test="ancestor::sect1[@id='ch-system-glibc']">
489 <xsl:value-of select="$timezone"/>
490 </xsl:when>
491 <xsl:when test="ancestor::sect1[@id='ch-system-groff']">
492 <xsl:value-of select="$page"/>
493 </xsl:when>
494 <xsl:when test="contains(string(.),'&lt;ll&gt;_&lt;CC&gt;')">
495 <xsl:value-of select="$lang"/>
496 </xsl:when>
497 <xsl:otherwise>
498 <xsl:text>**EDITME</xsl:text>
499 <xsl:apply-templates/>
500 <xsl:text>EDITME**</xsl:text>
501 </xsl:otherwise>
502 </xsl:choose>
503 </xsl:template>
504
505 <xsl:template name="outputpkgdest">
506 <xsl:param name="outputstring" select="foo"/>
507 <xsl:choose>
508 <xsl:when test="contains($outputstring,'make ')">
509 <xsl:choose>
510 <xsl:when test="not(starts-with($outputstring,'make'))">
511 <xsl:call-template name="outputpkgdest">
512 <xsl:with-param name="outputstring"
513 select="substring-before($outputstring,'make')"/>
514 </xsl:call-template>
515 <xsl:call-template name="outputpkgdest">
516 <xsl:with-param
517 name="outputstring"
518 select="substring-after($outputstring,
519 substring-before($outputstring,'make'))"/>
520 </xsl:call-template>
521 </xsl:when>
522 <xsl:otherwise>
523 <xsl:choose>
524<!-- special cases (no DESTDIR) here -->
525 <xsl:when test="ancestor::sect1[@id='ch-system-glibc']">
526 <xsl:text>make install_root=$PKG_DEST -j1</xsl:text>
527 <xsl:value-of
528 select="substring-before(substring-after(string(),'make'),
529 'install')"/>
530 <xsl:text>install&#xA;</xsl:text>
531 </xsl:when>
532 <xsl:when test="ancestor::sect1[@id='ch-system-bzip2']">
533 <xsl:text>make PREFIX=$PKG_DEST/usr install&#xA;</xsl:text>
534 </xsl:when>
535 <xsl:when test="ancestor::sect1[@id='ch-system-sysklogd']">
536 <xsl:text>make BINDIR=$PKG_DEST/sbin prefix=$PKG_DEST install&#xA;</xsl:text>
537 </xsl:when>
538 <xsl:when test="ancestor::sect1[@id='ch-system-iproute2']">
539 <xsl:text>make DESTDIR=$PKG_DEST</xsl:text>
540 <xsl:value-of
541 select="substring-before(substring-after(string(),'DESTDIR='),
542 'install')"/>
543 <xsl:text>install&#xA;</xsl:text>
544 </xsl:when>
545 <xsl:when test="ancestor::sect1[@id='ch-system-sysvinit']">
546 <xsl:text>make ROOT=$PKG_DEST</xsl:text>
547 <xsl:value-of
548 select="substring-before(substring-after(string(),'make'),
549 'install')"/>
550 <xsl:text>install&#xA;</xsl:text>
551 </xsl:when>
552 <xsl:when test="ancestor::sect1[@id='ch-bootable-kernel']">
553 <xsl:text>make INSTALL_MOD_PATH=$PKG_DEST</xsl:text>
554 <xsl:value-of
555 select="substring-before(substring-after(string(),'make'),
556 'install')"/>
557 <xsl:text>install&#xA;</xsl:text>
558 </xsl:when>
559 <xsl:when test="ancestor::sect1[@id='ch-system-attr']">
560 <xsl:text>DIST_ROOT=$PKG_DEST make</xsl:text>
561 <xsl:call-template name="outputpkgdest">
562 <xsl:with-param name="outputstring"
563 select="substring-after($outputstring,'make')"/>
564 </xsl:call-template>
565 </xsl:when>
566 <xsl:otherwise>
567 <xsl:text>make DESTDIR=$PKG_DEST</xsl:text>
568 <xsl:call-template name="outputpkgdest">
569 <xsl:with-param
570 name="outputstring"
571 select="substring-after($outputstring,'make')"/>
572 </xsl:call-template>
573 </xsl:otherwise>
574 </xsl:choose>
575 </xsl:otherwise>
576 </xsl:choose>
577 </xsl:when>
578 <xsl:otherwise> <!-- no make in this string -->
579 <xsl:choose>
580 <xsl:when test="contains($outputstring,'&gt;/') and
581 not(contains(substring-before($outputstring,'&gt;/'),' /'))">
582 <xsl:value-of select="substring-before($outputstring,'&gt;/')"/>
583 <xsl:text>&gt;$PKG_DEST/</xsl:text>
584 <xsl:call-template name="outputpkgdest">
585 <xsl:with-param name="outputstring" select="substring-after($outputstring,'&gt;/')"/>
586 </xsl:call-template>
587 </xsl:when>
588 <xsl:when test="contains($outputstring,' /')">
589 <xsl:value-of select="substring-before($outputstring,' /')"/>
590 <xsl:text> $PKG_DEST/</xsl:text>
591 <xsl:call-template name="outputpkgdest">
592 <xsl:with-param name="outputstring" select="substring-after($outputstring,' /')"/>
593 </xsl:call-template>
594 </xsl:when>
595 <xsl:otherwise>
596 <xsl:value-of select="$outputstring"/>
597 <xsl:text>&#xA;</xsl:text>
598 </xsl:otherwise>
599 </xsl:choose>
600 </xsl:otherwise>
601 </xsl:choose>
602 </xsl:template>
603</xsl:stylesheet>
Note: See TracBrowser for help on using the repository browser.