source: LFS/lfs.xsl@ 0313634

2.4
Last change on this file since 0313634 was 0313634, checked in by Pierre Labastie <pierre@…>, 7 years ago

Merge trunk r4024 and r4039, fixing generation of Makefile and of
DESTDIR install for libelf

  • Property mode set to 100644
File size: 27.1 KB
Line 
1<?xml version="1.0" encoding="ISO-8859-1"?>
2
3<!-- $Id$ -->
4
5<xsl:stylesheet
6 xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
7 xmlns:exsl="http://exslt.org/common"
8 extension-element-prefixes="exsl"
9 version="1.0">
10
11 <!-- which revision attribute to include: can only be sysv or systemd,
12 but we leave checking to the caller-->
13 <xsl:param name="revision" select="'sysv'"/>
14
15 <!-- use package management ?
16 n = no, original behavior
17 y = yes, add PKG_DEST to scripts in install commands of chapter06-08
18 -->
19 <xsl:param name="pkgmngt" select="'n'"/>
20
21 <!-- Run test suites?
22 0 = none
23 1 = only chapter06 Glibc, GCC and Binutils testsuites
24 2 = all chapter06 testsuites
25 3 = all chapter05 and chapter06 testsuites
26 -->
27 <xsl:param name="testsuite" select="'1'"/>
28
29 <!-- Bomb on test suites failures?
30 n = no, I want to build the full system and review the logs
31 y = yes, bomb at the first test suite failure to can review the build dir
32 -->
33 <xsl:param name="bomb-testsuite" select="'n'"/>
34
35 <!-- Install vim-lang package? OBSOLETE should always be 'n'-->
36 <xsl:param name="vim-lang" select="'n'"/>
37
38 <!-- Time zone -->
39 <xsl:param name="timezone" select="'GMT'"/>
40
41 <!-- Page size -->
42 <xsl:param name="page" select="'letter'"/>
43
44 <!-- Locale settings -->
45 <xsl:param name="lang" select="'C'"/>
46
47 <!-- Install the whole set of locales -->
48 <xsl:param name="full-locale" select="'n'"/>
49
50 <xsl:template match="/">
51 <xsl:apply-templates select="//sect1[not(@revision) or
52 @revision=$revision]"/>
53 </xsl:template>
54
55 <xsl:template match="sect1">
56<!-- Since this xsl:if tag encloses the whole template, it would
57 be much better to transpose this condition to the select part
58 of the "calling" apply-template. But that would change the numbering,
59 so that it would be difficult to compare to previous versions. So for
60 version 2.4, let us keep this -->
61 <xsl:if test="(../@id='chapter-temporary-tools' or
62 ../@id='chapter-building-system' or
63 ../@id='chapter-bootscripts' or
64 ../@id='chapter-bootable') and
65 (sect2[not(@revision) or @revision=$revision]//..|.)/
66 screen[(not(@role) or @role != 'nodump') and
67 (not(@revision) or @revision=$revision)]/
68 userinput[not(starts-with(string(),'chroot'))]">
69<!-- The last condition is a hack to allow previous versions of the
70 book where the chroot commands did not have role="nodump".
71 It only works if the chroot command is the only one on the page -->
72 <!-- The dirs names -->
73 <xsl:variable name="pi-dir" select="../processing-instruction('dbhtml')"/>
74 <xsl:variable name="pi-dir-value" select="substring-after($pi-dir,'dir=')"/>
75 <xsl:variable name="quote-dir" select="substring($pi-dir-value,1,1)"/>
76 <xsl:variable name="dirname" select="substring-before(substring($pi-dir-value,2),$quote-dir)"/>
77 <!-- The file names -->
78 <xsl:variable name="pi-file" select="processing-instruction('dbhtml')"/>
79 <xsl:variable name="pi-file-value" select="substring-after($pi-file,'filename=')"/>
80 <xsl:variable name="filename" select="substring-before(substring($pi-file-value,2),'.html')"/>
81 <!-- The build order -->
82 <xsl:variable name="position" select="position()"/>
83 <xsl:variable name="order">
84 <xsl:choose>
85 <xsl:when test="string-length($position) = 1">
86 <xsl:text>00</xsl:text>
87 <xsl:value-of select="$position"/>
88 </xsl:when>
89 <xsl:when test="string-length($position) = 2">
90 <xsl:text>0</xsl:text>
91 <xsl:value-of select="$position"/>
92 </xsl:when>
93 <xsl:otherwise>
94 <xsl:value-of select="$position"/>
95 </xsl:otherwise>
96 </xsl:choose>
97 </xsl:variable>
98 <!-- Inclusion of package manager scriptlets -->
99 <xsl:if test="@id='ch-tools-stripping' and $pkgmngt='y'">
100 <xsl:apply-templates
101 select="document('packageManager.xml')//sect1[contains(@id,'ch-tools')]"
102 mode="pkgmngt">
103 <xsl:with-param name="order" select="$order"/>
104 <xsl:with-param name="dirname" select="$dirname"/>
105 </xsl:apply-templates>
106 </xsl:if>
107 <xsl:if test="@id='ch-system-strippingagain' and $pkgmngt='y'">
108 <xsl:apply-templates
109 select="document('packageManager.xml')//sect1[contains(@id,'ch-system')]"
110 mode="pkgmngt">
111 <xsl:with-param name="order" select="$order"/>
112 <xsl:with-param name="dirname" select="$dirname"/>
113 </xsl:apply-templates>
114 </xsl:if>
115 <!-- Creating dirs and files -->
116 <exsl:document href="{$dirname}/{$order}-{$filename}" method="text">
117 <xsl:choose>
118 <xsl:when test="@id='ch-system-creatingdirs' or
119 @id='ch-system-createfiles' or
120 @id='ch-system-strippingagain'">
121 <xsl:text>#!/tools/bin/bash&#xA;set +h&#xA;</xsl:text>
122 </xsl:when>
123 <xsl:otherwise>
124 <xsl:text>#!/bin/bash&#xA;set +h&#xA;</xsl:text>
125 </xsl:otherwise>
126 </xsl:choose>
127 <xsl:if test="not(@id='ch-tools-stripping') and
128 not(@id='ch-system-strippingagain')">
129 <xsl:text>set -e&#xA;</xsl:text>
130 </xsl:if>
131 <xsl:text>&#xA;</xsl:text>
132 <xsl:if test="sect2[@role='installation']">
133 <xsl:text>cd $PKGDIR&#xA;</xsl:text>
134 </xsl:if>
135 <xsl:apply-templates select="sect2[not(@revision) or
136 @revision=$revision] |
137 screen[(not(@role) or
138 @role!='nodump') and
139 (not(@revision) or
140 @revision=$revision)]/userinput"/>
141 <xsl:if test="@id='ch-system-creatingdirs' and $pkgmngt='y'">
142 <xsl:apply-templates
143 select="document('packageManager.xml')//sect1[
144 @id='ch-pkgmngt-creatingdirs'
145 ]//userinput"
146 mode="pkgmngt"/>
147 </xsl:if>
148 <xsl:if test="@id='ch-system-createfiles' and $pkgmngt='y'">
149 <xsl:apply-templates
150 select="document('packageManager.xml')//sect1[
151 @id='ch-pkgmngt-createfiles'
152 ]//userinput"
153 mode="pkgmngt"/>
154 </xsl:if>
155 <xsl:text>echo -e "\n\nTotalseconds: $SECONDS\n"&#xA;</xsl:text>
156 <xsl:text>exit&#xA;</xsl:text>
157 </exsl:document>
158 </xsl:if>
159 </xsl:template>
160
161 <xsl:template match="sect2">
162 <xsl:apply-templates
163 select=".//screen[(not(@role) or
164 @role != 'nodump') and
165 (not(@revision) or
166 @revision=$revision)]/userinput[
167 @remap = 'pre' or
168 @remap = 'configure' or
169 @remap = 'make' or
170 @remap = 'test' and
171 not(current()/../@id='ch-tools-dejagnu') and
172 not(current()/../@id='ch-system-systemd')]"/>
173 <xsl:if
174 test="ancestor::chapter[@id != 'chapter-temporary-tools'] and
175 $pkgmngt = 'y' and
176 descendant::screen[not(@role) or
177 @role != 'nodump']/userinput[
178 @remap='install']">
179 <xsl:text>mkdir -pv $PKG_DEST/{boot,etc,lib,bin,sbin}
180mkdir -pv $PKG_DEST/usr/{lib,bin,sbin,include}
181mkdir -pv $PKG_DEST/usr/share/{doc,info,man}
182mkdir -pv $PKG_DEST/usr/share/man/man{1..8}
183ln -sv share/{man,doc,info} $PKG_DEST/usr
184case $(uname -m) in
185 x86_64) ln -sv lib $PKG_DEST/lib64 &amp;&amp; ln -sv lib $PKG_DEST/usr/lib64 ;;
186esac
187</xsl:text>
188 </xsl:if>
189 <xsl:if test="../@id = 'ch-system-glibc' and
190 @role='installation' and
191 $pkgmngt = 'y'">
192 <xsl:text>mkdir -pv $PKG_DEST/usr/include/{rpc,rpcsvc}
193</xsl:text>
194 </xsl:if>
195 <xsl:apply-templates
196 select=".//screen[(not(@role) or
197 @role != 'nodump') and
198 (not(@revision) or
199 @revision=$revision)]/userinput[@remap = 'install']"/>
200 <xsl:if test="ancestor::chapter[@id != 'chapter-temporary-tools'] and
201 $pkgmngt = 'y' and
202 descendant::screen[not(@role) or
203 @role != 'nodump']/userinput[
204 @remap='install']">
205 <xsl:if test="../@id = 'ch-system-man-pages'">
206<!-- these files are provided by the shadow package -->
207 <xsl:text>rm -fv $PKG_DEST/usr/share/man/{man3/getspnam.3,man5/passwd.5}
208</xsl:text>
209 </xsl:if>
210<!-- Attr man/man2 pages are already installed by man-pages. As of
211 March 2013, they are the same pages.
212 November 2015: now they are more accurate
213 in man-pages, and the man5 section is also in man-pages... -->
214 <xsl:if test="../@id = 'ch-system-attr'">
215 <xsl:text>rm -fv $PKG_DEST/usr/share/man/man2/*
216rm -fv $PKG_DEST/usr/share/man/man5/*
217</xsl:text>
218 </xsl:if>
219<!-- nologin is installed by util-linux. remove it from shadow -->
220 <xsl:if test="../@id = 'ch-system-shadow'">
221 <xsl:text>rm -fv $PKG_DEST/usr/share/man/man8/nologin.8
222rm -fv $PKG_DEST/sbin/nologin
223</xsl:text>
224 </xsl:if>
225 <xsl:text>rm -fv $PKG_DEST/{,usr/}lib64
226rm -fv $PKG_DEST/usr/{man,doc,info}
227for dir in $PKG_DEST/usr/share/man/man{1..8}; do
228 [[ -z $(ls $dir) ]] &amp;&amp; rmdir -v $dir
229done
230for dir in $PKG_DEST/usr/share/{doc,info,man}; do
231 [[ -z $(ls $dir) ]] &amp;&amp; rmdir -v $dir
232done
233for dir in $PKG_DEST/usr/{lib,bin,sbin,include}; do
234 [[ -z $(ls $dir) ]] &amp;&amp; rmdir -v $dir
235done
236for dir in $PKG_DEST/{boot,etc,lib,bin,sbin}; do
237 [[ -z $(ls $dir) ]] &amp;&amp; rmdir -v $dir
238done
239PREV_SEC=${SECONDS}
240packInstall
241SECONDS=${PREV_SEC}
242rm -rf $PKG_DEST
243</xsl:text>
244 </xsl:if>
245 <xsl:if test="$testsuite='3' and
246 ../@id='ch-tools-glibc' and
247 @role='installation'">
248 <xsl:copy-of select="//userinput[@remap='locale-test']"/>
249 <xsl:text>&#xA;</xsl:text>
250 </xsl:if>
251 <xsl:if test="../@id='ch-system-glibc' and @role='installation'">
252 <xsl:choose>
253 <xsl:when test="$full-locale='y'">
254 <xsl:copy-of select="//userinput[@remap='locale-full']"/>
255 <xsl:text>&#xA;</xsl:text>
256 </xsl:when>
257 <xsl:otherwise>
258 <xsl:copy-of select="//userinput[@remap='locale-test']"/>
259 <xsl:text>&#xA;</xsl:text>
260 <xsl:if test="not(contains(string(//userinput[@remap='locale-test']),$lang)) and $lang!='C' and $lang!='POSIX'">
261 <xsl:text>if LOCALE=`grep "</xsl:text>
262 <xsl:value-of select="$lang"/>
263 <xsl:text>/" $PKGDIR/localedata/SUPPORTED`; then
264 CHARMAP=`echo $LOCALE | sed 's,[^/]*/\([^ ]*\) [\],\1,'`
265 INPUT=`echo $LOCALE | sed 's,[/.].*,,'`
266 LOCALE=`echo $LOCALE | sed 's,/.*,,'`
267 localedef -i $INPUT -f $CHARMAP $LOCALE
268fi
269</xsl:text>
270 </xsl:if>
271 </xsl:otherwise>
272 </xsl:choose>
273 </xsl:if>
274 <xsl:apply-templates
275 select=".//screen[
276 (not(@role) or
277 @role != 'nodump') and
278 (not(@revision) or
279 @revision=$revision)
280 ]/userinput[
281 not(@remap) or
282 @remap='adjust' or
283 @remap='test' and current()/../@id='ch-tools-dejagnu' or
284 @remap='test' and current()/../@id='ch-system-systemd'
285 ]"/>
286 </xsl:template>
287
288 <xsl:template match="sect1" mode="pkgmngt">
289 <xsl:param name="dirname" select="chapter05"/>
290 <!-- The build order -->
291 <xsl:param name="order" select="062"/>
292<!-- The file names -->
293 <xsl:variable name="pi-file" select="processing-instruction('dbhtml')"/>
294 <xsl:variable name="pi-file-value" select="substring-after($pi-file,'filename=')"/>
295 <xsl:variable name="filename" select="substring-before(substring($pi-file-value,2),'.html')"/>
296 <!-- Creating dirs and files -->
297 <xsl:if test="count(descendant::screen/userinput) &gt; 0 and
298 count(descendant::screen/userinput) &gt;
299 count(descendant::screen[@role='nodump'])">
300 <exsl:document href="{$dirname}/{$order}-{position()}-{$filename}"
301 method="text">
302 <xsl:text>#!/bin/bash
303set +h
304set -e
305
306cd $PKGDIR
307</xsl:text>
308 <xsl:apply-templates
309 select=".//screen[not(@role) or
310 @role != 'nodump']/userinput[@remap != 'adjust']"
311 mode="pkgmngt"/>
312 <xsl:if test="$dirname = 'chapter06'">
313 <xsl:text>PREV_SEC=${SECONDS}
314packInstall
315SECONDS=${PREV_SEC}
316rm -rf $PKG_DEST
317</xsl:text>
318 </xsl:if>
319 <xsl:apply-templates
320 select=".//screen[not(@role) or
321 @role != 'nodump'
322 ]/userinput[not(@remap) or
323 @remap='adjust'
324 ]"
325 mode="pkgmngt"/>
326 <xsl:text>
327echo -e "\n\nTotalseconds: $SECONDS\n"
328exit
329</xsl:text>
330 </exsl:document>
331 </xsl:if>
332 </xsl:template>
333
334 <xsl:template match="userinput" mode="pkgmngt">
335 <xsl:apply-templates/>
336 <xsl:text>&#xA;</xsl:text>
337 </xsl:template>
338
339 <xsl:template match="userinput">
340 <xsl:choose>
341 <!-- Copying the kernel config file -->
342 <xsl:when test="string() = 'make mrproper'">
343 <xsl:text>make mrproper&#xA;</xsl:text>
344 <xsl:if test="ancestor::sect1[@id='ch-bootable-kernel']">
345 <xsl:text>cp -v ../kernel-config .config&#xA;</xsl:text>
346 </xsl:if>
347 </xsl:when>
348<!-- test instructions -->
349 <xsl:when test="@remap = 'test'">
350 <xsl:choose>
351 <xsl:when test="$testsuite = '0'"/>
352 <xsl:when test="$testsuite = '1' and
353 not(ancestor::sect1[@id='ch-system-gcc']) and
354 not(ancestor::sect1[@id='ch-system-glibc']) and
355 not(ancestor::sect1[@id='ch-system-gmp']) and
356 not(ancestor::sect1[@id='ch-system-mpfr']) and
357 not(ancestor::sect1[@id='ch-system-binutils'])"/>
358 <xsl:when test="$testsuite = '2' and
359 ancestor::chapter[@id='chapter-temporary-tools']"/>
360 <xsl:otherwise>
361 <xsl:choose>
362 <xsl:when test="$bomb-testsuite = 'n'">
363 <xsl:choose>
364 <!-- special case for glibc -->
365 <xsl:when test="contains(string(), 'glibc-check-log')">
366 <xsl:value-of
367 select="substring-before(string(),'2&gt;&amp;1')"/>
368 <xsl:text>&gt;&gt; $TEST_LOG 2&gt;&amp;1 || true&#xA;</xsl:text>
369 </xsl:when>
370 <!-- special case for procps-ng -->
371 <xsl:when test="contains(string(), 'pushd')">
372 <xsl:text>{ </xsl:text>
373 <xsl:apply-templates/>
374 <xsl:text>; } &gt;&gt; $TEST_LOG 2&gt;&amp;1 || true&#xA;</xsl:text>
375 </xsl:when>
376 <xsl:when test="contains(string(), 'make -k')">
377 <xsl:apply-templates/>
378 <xsl:text> &gt;&gt; $TEST_LOG 2&gt;&amp;1 || true&#xA;</xsl:text>
379 </xsl:when>
380 <xsl:when test="contains(string(), 'make')">
381 <xsl:value-of select="substring-before(string(),'make')"/>
382 <xsl:text>make -k</xsl:text>
383 <xsl:value-of select="substring-after(string(),'make')"/>
384 <xsl:text> &gt;&gt; $TEST_LOG 2&gt;&amp;1 || true&#xA;</xsl:text>
385 </xsl:when>
386 <xsl:otherwise>
387 <xsl:apply-templates/>
388 <xsl:if test="not(contains(string(), '&gt;&gt;'))">
389 <xsl:text> &gt;&gt; $TEST_LOG 2&gt;&amp;1</xsl:text>
390 </xsl:if>
391 <xsl:text>&#xA;</xsl:text>
392 </xsl:otherwise>
393 </xsl:choose>
394 </xsl:when>
395 <xsl:otherwise>
396 <!-- bomb-testsuite != 'n'-->
397 <xsl:choose>
398 <!-- special case for glibc -->
399 <xsl:when test="contains(string(), 'glibc-check-log')">
400 <xsl:value-of
401 select="substring-before(string(),'2&gt;&amp;1')"/>
402 <xsl:text>&gt;&gt; $TEST_LOG 2&gt;&amp;1 || true&#xA;</xsl:text>
403 </xsl:when>
404 <!-- special case for gmp -->
405 <xsl:when test="contains(string(), 'tee gmp-check-log')">
406 <xsl:text>(</xsl:text>
407 <xsl:apply-templates/>
408 <xsl:text>&gt;&gt; $TEST_LOG 2&gt;&amp;1 &amp;&amp; exit $PIPESTATUS)&#xA;</xsl:text>
409 </xsl:when>
410 <!-- special case for procps-ng -->
411 <xsl:when test="contains(string(), 'pushd')">
412 <xsl:text>{ </xsl:text>
413 <xsl:apply-templates/>
414 <xsl:text>; } &gt;&gt; $TEST_LOG 2&gt;&amp;1&#xA;</xsl:text>
415 </xsl:when>
416 <xsl:when test="contains(string(), 'make -k')">
417 <xsl:apply-templates/>
418 <xsl:text> &gt;&gt; $TEST_LOG 2&gt;&amp;1 || true&#xA;</xsl:text>
419 </xsl:when>
420 <xsl:otherwise>
421 <xsl:apply-templates/>
422 <xsl:if test="not(contains(string(), '&gt;&gt;'))">
423 <xsl:text> &gt;&gt; $TEST_LOG 2&gt;&amp;1</xsl:text>
424 </xsl:if>
425 <xsl:text>&#xA;</xsl:text>
426 </xsl:otherwise>
427 </xsl:choose>
428 </xsl:otherwise>
429 </xsl:choose>
430 </xsl:otherwise>
431 </xsl:choose>
432 </xsl:when>
433<!-- End of test instructions -->
434 <!-- Don't stop on strip run -->
435 <xsl:when test="contains(string(),'strip ')">
436 <xsl:apply-templates/>
437 <xsl:text> || true&#xA;</xsl:text>
438 </xsl:when>
439<!-- Package management -->
440<!-- Add $PKG_DEST to installation commands -->
441 <xsl:when test="@remap='install' and
442 not(ancestor::chapter[
443 @id='chapter-temporary-tools'
444 ])">
445 <xsl:choose>
446 <xsl:when test="$pkgmngt='n'">
447 <xsl:choose>
448 <xsl:when test="contains(string(),'firmware,udev')">
449 <xsl:text>if [[ ! -d /lib/udev/devices ]] ; then&#xA;</xsl:text>
450 <xsl:apply-templates/>
451 <xsl:text>&#xA;fi&#xA;</xsl:text>
452 </xsl:when>
453 <xsl:otherwise>
454 <xsl:apply-templates/>
455 <xsl:text>&#xA;</xsl:text>
456 </xsl:otherwise>
457 </xsl:choose>
458 </xsl:when>
459 <xsl:otherwise><!--pkgmngt = 'y'-->
460 <xsl:choose>
461 <xsl:when test="./literal">
462 <xsl:call-template name="outputpkgdest">
463 <xsl:with-param name="outputstring" select="text()[1]"/>
464 </xsl:call-template>
465 <xsl:apply-templates select="literal"/>
466 <xsl:call-template name="outputpkgdest">
467 <xsl:with-param name="outputstring" select="text()[2]"/>
468 </xsl:call-template>
469 </xsl:when>
470 <xsl:otherwise>
471 <xsl:call-template name="outputpkgdest">
472 <xsl:with-param name="outputstring" select="string()"/>
473 </xsl:call-template>
474 </xsl:otherwise>
475 </xsl:choose>
476 </xsl:otherwise>
477 </xsl:choose>
478 </xsl:when>
479 <!-- if package management, we should make an independant package for
480 tzdata. -->
481 <xsl:when test="contains(string(),'tzdata') and $pkgmngt='y'">
482 <xsl:text>
483OLD_PKG_DEST=$PKG_DEST
484OLD_PKGDIR=$PKGDIR
485PKG_DEST=$(dirname $OLD_PKG_DEST)/001-tzdata
486PKGDIR=$(dirname $PKGDIR)/tzdata-</xsl:text>
487 <xsl:copy-of select="substring-before(
488 substring-after(string(),'tzdata'),
489 '.tar')"/>
490 <xsl:text>
491</xsl:text>
492 <xsl:copy-of select="substring-before(string(),'ZONEINFO=')"/>
493 <xsl:text>ZONEINFO=$PKG_DEST</xsl:text>
494 <xsl:copy-of select="substring-after(string(),'ZONEINFO=')"/>
495 <xsl:text>
496PREV_SEC=${SECONDS}
497packInstall
498SECONDS=${PREV_SEC}
499rm -rf $PKG_DEST
500PKG_DEST=$OLD_PKG_DEST
501unset OLD_PKG_DEST
502PKGDIR=$OLD_PKGDIR
503unset OLD_PKGDIR
504</xsl:text>
505 </xsl:when><!-- addition for tzdata + package management -->
506 <!-- End addition for package management -->
507 <!-- The rest of commands -->
508 <xsl:otherwise>
509 <xsl:apply-templates/>
510 <xsl:text>&#xA;</xsl:text>
511 </xsl:otherwise>
512 </xsl:choose>
513 </xsl:template>
514
515 <xsl:template match="replaceable">
516 <xsl:choose>
517 <xsl:when test="ancestor::sect1[@id='ch-system-glibc']">
518 <xsl:value-of select="$timezone"/>
519 </xsl:when>
520 <xsl:when test="ancestor::sect1[@id='ch-system-groff']">
521 <xsl:value-of select="$page"/>
522 </xsl:when>
523 <xsl:when test="contains(string(.),'&lt;ll&gt;_&lt;CC&gt;')">
524 <xsl:value-of select="$lang"/>
525 </xsl:when>
526 <xsl:otherwise>
527 <xsl:text>**EDITME</xsl:text>
528 <xsl:apply-templates/>
529 <xsl:text>EDITME**</xsl:text>
530 </xsl:otherwise>
531 </xsl:choose>
532 </xsl:template>
533
534 <xsl:template name="outputpkgdest">
535 <xsl:param name="outputstring" select="foo"/>
536 <xsl:choose>
537 <xsl:when test="contains($outputstring,'make ')">
538 <xsl:choose>
539 <xsl:when test="not(starts-with($outputstring,'make'))">
540 <xsl:call-template name="outputpkgdest">
541 <xsl:with-param name="outputstring"
542 select="substring-before($outputstring,'make')"/>
543 </xsl:call-template>
544 <xsl:call-template name="outputpkgdest">
545 <xsl:with-param
546 name="outputstring"
547 select="substring-after($outputstring,
548 substring-before($outputstring,'make'))"/>
549 </xsl:call-template>
550 </xsl:when>
551 <xsl:otherwise>
552 <xsl:choose>
553<!-- special cases (no DESTDIR) here -->
554 <xsl:when test="ancestor::sect1[@id='ch-system-glibc']">
555 <xsl:text>make install_root=$PKG_DEST -j1</xsl:text>
556 <xsl:value-of
557 select="substring-before(substring-after(string(),'make'),
558 'install')"/>
559 <xsl:text>install&#xA;</xsl:text>
560 </xsl:when>
561 <xsl:when test="ancestor::sect1[@id='ch-system-bzip2']">
562 <xsl:text>make PREFIX=$PKG_DEST/usr install&#xA;</xsl:text>
563 </xsl:when>
564 <xsl:when test="ancestor::sect1[@id='ch-system-sysklogd']">
565 <xsl:text>make BINDIR=$PKG_DEST/sbin prefix=$PKG_DEST install&#xA;</xsl:text>
566 </xsl:when>
567 <xsl:when test="ancestor::sect1[@id='ch-system-iproute2']">
568 <xsl:text>make DESTDIR=$PKG_DEST DOCDIR=</xsl:text>
569 <xsl:value-of
570 select="substring-before(substring-after(string(),'DOCDIR='),
571 'install')"/>
572 <xsl:text>install&#xA;</xsl:text>
573 </xsl:when>
574 <xsl:when test="ancestor::sect1[@id='ch-system-sysvinit']">
575 <xsl:text>make ROOT=$PKG_DEST</xsl:text>
576 <xsl:value-of
577 select="substring-before(substring-after(string(),'make'),
578 'install')"/>
579 <xsl:text>install&#xA;</xsl:text>
580 </xsl:when>
581 <xsl:when test="ancestor::sect1[@id='ch-bootable-kernel']">
582 <xsl:text>make INSTALL_MOD_PATH=$PKG_DEST</xsl:text>
583 <xsl:value-of
584 select="substring-before(substring-after(string(),'make'),
585 'install')"/>
586 <xsl:text>install&#xA;</xsl:text>
587 </xsl:when>
588 <xsl:when test="ancestor::sect1[@id='ch-system-attr']">
589 <xsl:text>DIST_ROOT=$PKG_DEST make</xsl:text>
590 <xsl:call-template name="outputpkgdest">
591 <xsl:with-param name="outputstring"
592 select="substring-after($outputstring,'make')"/>
593 </xsl:call-template>
594 </xsl:when>
595 <xsl:otherwise>
596 <xsl:text>make DESTDIR=$PKG_DEST</xsl:text>
597 <xsl:call-template name="outputpkgdest">
598 <xsl:with-param
599 name="outputstring"
600 select="substring-after($outputstring,'make')"/>
601 </xsl:call-template>
602 </xsl:otherwise>
603 </xsl:choose>
604 </xsl:otherwise>
605 </xsl:choose>
606 </xsl:when>
607 <xsl:when test="contains($outputstring,'ninja ')">
608 <xsl:choose>
609 <xsl:when test="not(starts-with($outputstring,'ninja'))">
610 <xsl:call-template name="outputpkgdest">
611 <xsl:with-param name="outputstring"
612 select="substring-before($outputstring,'ninja')"/>
613 </xsl:call-template>
614 <xsl:call-template name="outputpkgdest">
615 <xsl:with-param
616 name="outputstring"
617 select="substring-after($outputstring,
618 substring-before($outputstring,'ninja'))"/>
619 </xsl:call-template>
620 </xsl:when>
621 <xsl:otherwise> <!-- ninja is the first word -->
622 <xsl:text>DESTDIR=$PKG_DEST ninja</xsl:text>
623 <xsl:call-template name="outputpkgdest">
624 <xsl:with-param
625 name="outputstring"
626 select="substring-after($outputstring,'ninja')"/>
627 </xsl:call-template>
628 </xsl:otherwise>
629 </xsl:choose>
630 </xsl:when>
631 <xsl:otherwise> <!-- no make nor ninja in this string -->
632 <xsl:choose>
633 <xsl:when test="contains($outputstring,'&gt;/') and
634 not(contains(substring-before($outputstring,'&gt;/'),' /'))">
635 <xsl:value-of select="substring-before($outputstring,'&gt;/')"/>
636 <xsl:text>&gt;$PKG_DEST/</xsl:text>
637 <xsl:call-template name="outputpkgdest">
638 <xsl:with-param name="outputstring" select="substring-after($outputstring,'&gt;/')"/>
639 </xsl:call-template>
640 </xsl:when>
641 <xsl:when test="contains($outputstring,' /')">
642 <xsl:value-of select="substring-before($outputstring,' /')"/>
643 <xsl:text> $PKG_DEST/</xsl:text>
644 <xsl:call-template name="outputpkgdest">
645 <xsl:with-param name="outputstring" select="substring-after($outputstring,' /')"/>
646 </xsl:call-template>
647 </xsl:when>
648 <xsl:otherwise>
649 <xsl:value-of select="$outputstring"/>
650 <xsl:text>&#xA;</xsl:text>
651 </xsl:otherwise>
652 </xsl:choose>
653 </xsl:otherwise>
654 </xsl:choose>
655 </xsl:template>
656</xsl:stylesheet>
Note: See TracBrowser for help on using the repository browser.