source: LFS/lfs.xsl@ cbfba99

2.4 ablfs-more legacy new_features trunk
Last change on this file since cbfba99 was d68eb1b, checked in by Pierre Labastie <pierre@…>, 11 years ago

Major change to th scripts layout:

  • Do not put the chroot commands in $PROGNAME-commands, but rather in a separate directory chroot-scripts
  • Use the commands in the chroot-scripts directory to generate the CHROOT variables in Makefile
  • The commands are extracted to $PROGNAME-commands only if they do not have role="nodump attribute and they do not begin with "chroot" (for compatibility with previous books where chroot commands did not have the role="nodump" attribute.
  • Property mode set to 100644
File size: 23.5 KB
Line 
1<?xml version="1.0" encoding="ISO-8859-1"?>
2
3<!-- $Id$ -->
4
5<xsl:stylesheet
6 xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
7 xmlns:exsl="http://exslt.org/common"
8 extension-element-prefixes="exsl"
9 version="1.0">
10
11 <!-- use package management ?
12 n = no, original behavior
13 y = yes, add PKG_DEST to scripts in install commands of chapter06-08
14 -->
15 <xsl:param name="pkgmngt" select="n"/>
16
17 <!-- Run test suites?
18 0 = none
19 1 = only chapter06 Glibc, GCC and Binutils testsuites
20 2 = all chapter06 testsuites
21 3 = all chapter05 and chapter06 testsuites
22 -->
23 <xsl:param name="testsuite" select="1"/>
24
25 <!-- Bomb on test suites failures?
26 n = no, I want to build the full system and review the logs
27 y = yes, bomb at the first test suite failure to can review the build dir
28 -->
29 <xsl:param name="bomb-testsuite" select="n"/>
30
31 <!-- Install vim-lang package? OBSOLETE should always be 'n'-->
32 <xsl:param name="vim-lang" select="n"/>
33
34 <!-- Time zone -->
35 <xsl:param name="timezone" select="GMT"/>
36
37 <!-- Page size -->
38 <xsl:param name="page" select="letter"/>
39
40 <!-- Locale settings -->
41 <xsl:param name="lang" select="C"/>
42
43 <!-- Install the whole set of locales -->
44 <xsl:param name='full-locale' select='n'/>
45
46 <xsl:template match="/">
47 <xsl:apply-templates select="//sect1"/>
48 </xsl:template>
49
50 <xsl:template match="sect1">
51 <xsl:if test="(../@id='chapter-temporary-tools' or
52 ../@id='chapter-building-system' or
53 ../@id='chapter-bootscripts' or
54 ../@id='chapter-bootable') and
55 count(descendant::screen/userinput) &gt; 0 and
56 count(descendant::screen/userinput) &gt;
57 count(descendant::screen[@role='nodump']) and
58 count(descendant::screen/userinput) &gt;
59 count(descendant::screen/userinput[starts-with(string(),'chroot')])">
60<!-- The last condition is a hack to allow previous versions of the
61 book where the chroot commands did not have role="nodump".
62 It only works if the chroot command is the only one on the page -->
63 <!-- The dirs names -->
64 <xsl:variable name="pi-dir" select="../processing-instruction('dbhtml')"/>
65 <xsl:variable name="pi-dir-value" select="substring-after($pi-dir,'dir=')"/>
66 <xsl:variable name="quote-dir" select="substring($pi-dir-value,1,1)"/>
67 <xsl:variable name="dirname" select="substring-before(substring($pi-dir-value,2),$quote-dir)"/>
68 <!-- The file names -->
69 <xsl:variable name="pi-file" select="processing-instruction('dbhtml')"/>
70 <xsl:variable name="pi-file-value" select="substring-after($pi-file,'filename=')"/>
71 <xsl:variable name="filename" select="substring-before(substring($pi-file-value,2),'.html')"/>
72 <!-- The build order -->
73 <xsl:variable name="position" select="position()"/>
74 <xsl:variable name="order">
75 <xsl:choose>
76 <xsl:when test="string-length($position) = 1">
77 <xsl:text>00</xsl:text>
78 <xsl:value-of select="$position"/>
79 </xsl:when>
80 <xsl:when test="string-length($position) = 2">
81 <xsl:text>0</xsl:text>
82 <xsl:value-of select="$position"/>
83 </xsl:when>
84 <xsl:otherwise>
85 <xsl:value-of select="$position"/>
86 </xsl:otherwise>
87 </xsl:choose>
88 </xsl:variable>
89 <!-- Inclusion of package manager scriptlets -->
90 <xsl:if test="@id='ch-tools-stripping' and $pkgmngt='y'">
91 <xsl:apply-templates
92 select="document('packageManager.xml')//sect1[contains(@id,'ch-tools')]"
93 mode="pkgmngt">
94 <xsl:with-param name="order" select="$order"/>
95 <xsl:with-param name="dirname" select="$dirname"/>
96 </xsl:apply-templates>
97 </xsl:if>
98 <xsl:if test="@id='ch-system-strippingagain' and $pkgmngt='y'">
99 <xsl:apply-templates
100 select="document('packageManager.xml')//sect1[contains(@id,'ch-system')]"
101 mode="pkgmngt">
102 <xsl:with-param name="order" select="$order"/>
103 <xsl:with-param name="dirname" select="$dirname"/>
104 </xsl:apply-templates>
105 </xsl:if>
106 <!-- Creating dirs and files -->
107 <exsl:document href="{$dirname}/{$order}-{$filename}" method="text">
108 <xsl:choose>
109 <xsl:when test="@id='ch-system-creatingdirs' or
110 @id='ch-system-createfiles' or
111 @id='ch-system-strippingagain'">
112 <xsl:text>#!/tools/bin/bash&#xA;set +h&#xA;</xsl:text>
113 </xsl:when>
114 <xsl:otherwise>
115 <xsl:text>#!/bin/bash&#xA;set +h&#xA;</xsl:text>
116 </xsl:otherwise>
117 </xsl:choose>
118 <xsl:if test="not(@id='ch-tools-stripping') and
119 not(@id='ch-system-strippingagain')">
120 <xsl:text>set -e&#xA;</xsl:text>
121 </xsl:if>
122 <xsl:text>&#xA;</xsl:text>
123 <xsl:if test="sect2[@role='installation']">
124 <xsl:text>cd $PKGDIR&#xA;</xsl:text>
125 </xsl:if>
126 <xsl:apply-templates select="sect2|
127 screen[not(@role) or
128 @role!='nodump']/userinput"/>
129 <xsl:if test="@id='ch-system-creatingdirs'">
130 <xsl:apply-templates
131 select="document('packageManager.xml')//sect1[
132 @id='ch-pkgmngt-creatingdirs'
133 ]//userinput"/>
134 </xsl:if>
135 <xsl:if test="@id='ch-system-createfiles'">
136 <xsl:apply-templates
137 select="document('packageManager.xml')//sect1[
138 @id='ch-pkgmngt-createfiles'
139 ]//userinput"/>
140 </xsl:if>
141 <xsl:text>echo -e "\n\nTotalseconds: $SECONDS\n"&#xA;</xsl:text>
142 <xsl:text>exit&#xA;</xsl:text>
143 </exsl:document>
144 </xsl:if>
145 </xsl:template>
146
147 <xsl:template match="sect2">
148 <xsl:apply-templates
149 select=".//screen[not(@role) or
150 @role != 'nodump']/userinput[
151 @remap = 'pre' or
152 @remap = 'configure' or
153 @remap = 'make' or
154 @remap = 'test' and
155 not(current()/../@id='ch-tools-dejagnu')]"/>
156 <xsl:if
157 test="ancestor::chapter[@id != 'chapter-temporary-tools'] and
158 $pkgmngt = 'y' and
159 descendant::screen[not(@role) or
160 @role != 'nodump']/userinput[
161 @remap='install']">
162 <xsl:text>mkdir -pv $PKG_DEST/{boot,etc,lib,bin,sbin}
163mkdir -pv $PKG_DEST/usr/{lib,bin,sbin,include}
164mkdir -pv $PKG_DEST/usr/share/{doc,info,man}
165mkdir -pv $PKG_DEST/usr/share/man/man{1..8}
166ln -sv share/{man,doc,info} $PKG_DEST/usr
167case $(uname -m) in
168 x86_64) ln -sv lib $PKG_DEST/lib64 &amp;&amp; ln -sv lib $PKG_DEST/usr/lib64 ;;
169esac
170</xsl:text>
171 </xsl:if>
172 <xsl:if test="../@id = 'ch-system-glibc' and
173 @role='installation' and
174 $pkgmngt = 'y'">
175 <xsl:text>mkdir -pv $PKG_DEST/usr/include/{rpc,rpcsvc}
176</xsl:text>
177 </xsl:if>
178 <xsl:apply-templates
179 select=".//screen[not(@role) or
180 @role != 'nodump']/userinput[@remap = 'install']"/>
181 <xsl:if test="ancestor::chapter[@id != 'chapter-temporary-tools'] and
182 $pkgmngt = 'y' and
183 descendant::screen[not(@role) or
184 @role != 'nodump']/userinput[
185 @remap='install']">
186 <xsl:if test="../@id = 'ch-system-man-pages'">
187<!-- these files are provided by the shadow package -->
188 <xsl:text>rm -fv $PKG_DEST/usr/share/man/{man3/getspnam.3,man5/passwd.5}
189</xsl:text>
190 </xsl:if>
191<!-- Attr man/man2 pages are already installed by man-pages. As of
192 March 2013, they are the same pages. Check it sometimes... -->
193 <xsl:if test="../@id = 'ch-system-attr'">
194 <xsl:text>rm -fv $PKG_DEST/usr/share/man/man2/*
195</xsl:text>
196 </xsl:if>
197 <xsl:text>rm -fv $PKG_DEST/{,usr/}lib64
198rm -fv $PKG_DEST/usr/{man,doc,info}
199for dir in $PKG_DEST/usr/share/man/man{1..8}; do
200 [[ -z $(ls $dir) ]] &amp;&amp; rmdir -v $dir
201done
202for dir in $PKG_DEST/usr/share/{doc,info,man}; do
203 [[ -z $(ls $dir) ]] &amp;&amp; rmdir -v $dir
204done
205for dir in $PKG_DEST/usr/{lib,bin,sbin,include}; do
206 [[ -z $(ls $dir) ]] &amp;&amp; rmdir -v $dir
207done
208for dir in $PKG_DEST/{boot,etc,lib,bin,sbin}; do
209 [[ -z $(ls $dir) ]] &amp;&amp; rmdir -v $dir
210done
211packInstall
212rm -rf $PKG_DEST
213</xsl:text>
214 </xsl:if>
215 <xsl:if test="$testsuite='3' and
216 ../@id='ch-tools-glibc' and
217 @role='installation'">
218 <xsl:copy-of select="//userinput[@remap='locale-test']"/>
219 <xsl:text>&#xA;</xsl:text>
220 </xsl:if>
221 <xsl:if test="../@id='ch-system-glibc' and @role='installation'">
222 <xsl:choose>
223 <xsl:when test="$full-locale='y'">
224 <xsl:copy-of select="//userinput[@remap='locale-full']"/>
225 <xsl:text>&#xA;</xsl:text>
226 </xsl:when>
227 <xsl:otherwise>
228 <xsl:copy-of select="//userinput[@remap='locale-test']"/>
229 <xsl:text>&#xA;</xsl:text>
230 <xsl:if test="not(contains(string(//userinput[@remap='locale-test']),$lang)) and $lang!='C' and $lang!='POSIX'">
231 <xsl:text>if LOCALE=`grep "</xsl:text>
232 <xsl:value-of select="$lang"/>
233 <xsl:text>/" $PKGDIR/localedata/SUPPORTED`; then
234 CHARMAP=`echo $LOCALE | sed 's,[^/]*/\([^ ]*\) [\],\1,'`
235 INPUT=`echo $LOCALE | sed 's,[/.].*,,'`
236 LOCALE=`echo $LOCALE | sed 's,/.*,,'`
237 localedef -i $INPUT -f $CHARMAP $LOCALE
238fi
239</xsl:text>
240 </xsl:if>
241 </xsl:otherwise>
242 </xsl:choose>
243 </xsl:if>
244 <xsl:apply-templates
245 select=".//screen[
246 not(@role) or
247 @role != 'nodump'
248 ]/userinput[
249 not(@remap) or
250 @remap='adjust' or
251 @remap='test' and current()/../@id='ch-tools-dejagnu'
252 ]"/>
253 </xsl:template>
254
255 <xsl:template match="sect1" mode="pkgmngt">
256 <xsl:param name="dirname" select="chapter05"/>
257 <!-- The build order -->
258 <xsl:param name="order" select="062"/>
259<!-- The file names -->
260 <xsl:variable name="pi-file" select="processing-instruction('dbhtml')"/>
261 <xsl:variable name="pi-file-value" select="substring-after($pi-file,'filename=')"/>
262 <xsl:variable name="filename" select="substring-before(substring($pi-file-value,2),'.html')"/>
263 <!-- Creating dirs and files -->
264 <xsl:if test="count(descendant::screen/userinput) &gt; 0 and
265 count(descendant::screen/userinput) &gt;
266 count(descendant::screen[@role='nodump'])">
267 <exsl:document href="{$dirname}/{$order}-{position()}-{$filename}"
268 method="text">
269 <xsl:text>#!/bin/bash
270set +h
271set -e
272
273cd $PKGDIR
274</xsl:text>
275 <xsl:apply-templates
276 select=".//screen[not(@role) or
277 @role != 'nodump']/userinput[@remap != 'adjust']"
278 mode="pkgmngt"/>
279 <xsl:if test="$dirname = 'chapter06'">
280 <xsl:text>packInstall
281rm -rf $PKG_DEST
282</xsl:text>
283 </xsl:if>
284 <xsl:apply-templates
285 select=".//screen[not(@role) or
286 @role != 'nodump'
287 ]/userinput[not(@remap) or
288 @remap='adjust'
289 ]"
290 mode="pkgmngt"/>
291 <xsl:text>
292echo -e "\n\nTotalseconds: $SECONDS\n"
293exit
294</xsl:text>
295 </exsl:document>
296 </xsl:if>
297 </xsl:template>
298
299 <xsl:template match="userinput" mode="pkgmngt">
300 <xsl:apply-templates/>
301 <xsl:text>&#xA;</xsl:text>
302 </xsl:template>
303
304 <xsl:template match="userinput">
305 <xsl:choose>
306 <!-- Copying the kernel config file -->
307 <xsl:when test="string() = 'make mrproper'">
308 <xsl:text>make mrproper&#xA;</xsl:text>
309 <xsl:if test="ancestor::sect1[@id='ch-bootable-kernel']">
310 <xsl:text>cp -v ../kernel-config .config&#xA;</xsl:text>
311 </xsl:if>
312 </xsl:when>
313<!-- test instructions -->
314 <xsl:when test="@remap = 'test'">
315 <xsl:choose>
316 <xsl:when test="$testsuite = '0'"/>
317 <xsl:when test="$testsuite = '1' and
318 not(ancestor::sect1[@id='ch-system-gcc']) and
319 not(ancestor::sect1[@id='ch-system-glibc']) and
320 not(ancestor::sect1[@id='ch-system-gmp']) and
321 not(ancestor::sect1[@id='ch-system-mpfr']) and
322 not(ancestor::sect1[@id='ch-system-binutils'])"/>
323 <xsl:when test="$testsuite = '2' and
324 ancestor::chapter[@id='chapter-temporary-tools']"/>
325 <xsl:otherwise>
326 <xsl:choose>
327 <xsl:when test="$bomb-testsuite = 'n'">
328 <xsl:choose>
329 <!-- special case for glibc -->
330 <xsl:when test="contains(string(), 'glibc-check-log')">
331 <xsl:value-of
332 select="substring-before(string(),'2&gt;&amp;1')"/>
333 <xsl:text>&gt;&gt; $TEST_LOG 2&gt;&amp;1 || true&#xA;</xsl:text>
334 </xsl:when>
335 <!-- special case for procps-ng -->
336 <xsl:when test="contains(string(), 'pushd')">
337 <xsl:text>{ </xsl:text>
338 <xsl:apply-templates/>
339 <xsl:text>; } &gt;&gt; $TEST_LOG 2&gt;&amp;1 || true&#xA;</xsl:text>
340 </xsl:when>
341 <xsl:when test="contains(string(), 'make -k')">
342 <xsl:apply-templates/>
343 <xsl:text> &gt;&gt; $TEST_LOG 2&gt;&amp;1 || true&#xA;</xsl:text>
344 </xsl:when>
345 <xsl:when test="contains(string(), 'make')">
346 <xsl:value-of select="substring-before(string(),'make')"/>
347 <xsl:text>make -k</xsl:text>
348 <xsl:value-of select="substring-after(string(),'make')"/>
349 <xsl:text> &gt;&gt; $TEST_LOG 2&gt;&amp;1 || true&#xA;</xsl:text>
350 </xsl:when>
351 <xsl:otherwise>
352 <xsl:apply-templates/>
353 <xsl:if test="not(contains(string(), '&gt;&gt;'))">
354 <xsl:text> &gt;&gt; $TEST_LOG 2&gt;&amp;1</xsl:text>
355 </xsl:if>
356 <xsl:text>&#xA;</xsl:text>
357 </xsl:otherwise>
358 </xsl:choose>
359 </xsl:when>
360 <xsl:otherwise>
361 <!-- bomb-testsuite != 'n'-->
362 <xsl:choose>
363 <!-- special case for glibc -->
364 <xsl:when test="contains(string(), 'glibc-check-log')">
365 <xsl:value-of
366 select="substring-before(string(),'2&gt;&amp;1')"/>
367 <xsl:text>&gt;&gt; $TEST_LOG 2&gt;&amp;1 || true&#xA;</xsl:text>
368 </xsl:when>
369 <!-- special case for gmp -->
370 <xsl:when test="contains(string(), 'tee gmp-check-log')">
371 <xsl:text>(</xsl:text>
372 <xsl:apply-templates/>
373 <xsl:text>&gt;&gt; $TEST_LOG 2&gt;&amp;1 &amp;&amp; exit $PIPESTATUS)&#xA;</xsl:text>
374 </xsl:when>
375 <!-- special case for procps-ng -->
376 <xsl:when test="contains(string(), 'pushd')">
377 <xsl:text>{ </xsl:text>
378 <xsl:apply-templates/>
379 <xsl:text>; } &gt;&gt; $TEST_LOG 2&gt;&amp;1&#xA;</xsl:text>
380 </xsl:when>
381 <xsl:when test="contains(string(), 'make -k')">
382 <xsl:apply-templates/>
383 <xsl:text> &gt;&gt; $TEST_LOG 2&gt;&amp;1 || true&#xA;</xsl:text>
384 </xsl:when>
385 <xsl:otherwise>
386 <xsl:apply-templates/>
387 <xsl:if test="not(contains(string(), '&gt;&gt;'))">
388 <xsl:text> &gt;&gt; $TEST_LOG 2&gt;&amp;1</xsl:text>
389 </xsl:if>
390 <xsl:text>&#xA;</xsl:text>
391 </xsl:otherwise>
392 </xsl:choose>
393 </xsl:otherwise>
394 </xsl:choose>
395 </xsl:otherwise>
396 </xsl:choose>
397 </xsl:when>
398<!-- End of test instructions -->
399 <!-- Don't stop on strip run -->
400 <xsl:when test="contains(string(),'strip ')">
401 <xsl:apply-templates/>
402 <xsl:text> || true&#xA;</xsl:text>
403 </xsl:when>
404<!-- Package management -->
405<!-- Add $PKG_DEST to installation commands -->
406 <xsl:when test="@remap='install' and
407 not(ancestor::chapter[
408 @id='chapter-temporary-tools'
409 ])">
410 <xsl:choose>
411 <xsl:when test="$pkgmngt='n'">
412 <xsl:choose>
413 <xsl:when test="contains(string(),'firmware,udev')">
414 <xsl:text>if [[ ! -d /lib/udev/devices ]] ; then&#xA;</xsl:text>
415 <xsl:apply-templates/>
416 <xsl:text>&#xA;fi&#xA;</xsl:text>
417 </xsl:when>
418 <xsl:otherwise>
419 <xsl:apply-templates/>
420 <xsl:text>&#xA;</xsl:text>
421 </xsl:otherwise>
422 </xsl:choose>
423 </xsl:when>
424 <xsl:otherwise><!--pkgmngt = 'y'-->
425 <xsl:choose>
426 <xsl:when test="./literal">
427 <xsl:call-template name="outputpkgdest">
428 <xsl:with-param name="outputstring" select="text()[1]"/>
429 </xsl:call-template>
430 <xsl:apply-templates select="literal"/>
431 <xsl:call-template name="outputpkgdest">
432 <xsl:with-param name="outputstring" select="text()[2]"/>
433 </xsl:call-template>
434 </xsl:when>
435 <xsl:otherwise>
436 <xsl:call-template name="outputpkgdest">
437 <xsl:with-param name="outputstring" select="string()"/>
438 </xsl:call-template>
439 </xsl:otherwise>
440 </xsl:choose>
441 </xsl:otherwise>
442 </xsl:choose>
443 </xsl:when>
444 <!-- End addition for package management -->
445 <!-- The rest of commands -->
446 <xsl:otherwise>
447 <xsl:apply-templates/>
448 <xsl:text>&#xA;</xsl:text>
449 </xsl:otherwise>
450 </xsl:choose>
451 </xsl:template>
452
453 <xsl:template match="replaceable">
454 <xsl:choose>
455 <xsl:when test="ancestor::sect1[@id='ch-system-glibc']">
456 <xsl:value-of select="$timezone"/>
457 </xsl:when>
458 <xsl:when test="ancestor::sect1[@id='ch-system-groff']">
459 <xsl:value-of select="$page"/>
460 </xsl:when>
461 <xsl:when test="contains(string(.),'&lt;ll&gt;_&lt;CC&gt;')">
462 <xsl:value-of select="$lang"/>
463 </xsl:when>
464 <xsl:otherwise>
465 <xsl:text>**EDITME</xsl:text>
466 <xsl:apply-templates/>
467 <xsl:text>EDITME**</xsl:text>
468 </xsl:otherwise>
469 </xsl:choose>
470 </xsl:template>
471
472 <xsl:template name="outputpkgdest">
473 <xsl:param name="outputstring" select="foo"/>
474 <xsl:choose>
475 <xsl:when test="contains($outputstring,'make ')">
476 <xsl:choose>
477 <xsl:when test="not(starts-with($outputstring,'make'))">
478 <xsl:call-template name="outputpkgdest">
479 <xsl:with-param name="outputstring"
480 select="substring-before($outputstring,'make')"/>
481 </xsl:call-template>
482 <xsl:call-template name="outputpkgdest">
483 <xsl:with-param
484 name="outputstring"
485 select="substring-after($outputstring,
486 substring-before($outputstring,'make'))"/>
487 </xsl:call-template>
488 </xsl:when>
489 <xsl:otherwise>
490 <xsl:choose>
491<!-- special cases (no DESTDIR) here -->
492 <xsl:when test="ancestor::sect1[@id='ch-system-glibc']">
493 <xsl:text>make install_root=$PKG_DEST -j1</xsl:text>
494 <xsl:value-of
495 select="substring-before(substring-after(string(),'make'),
496 'install')"/>
497 <xsl:text>install&#xA;</xsl:text>
498 </xsl:when>
499 <xsl:when test="ancestor::sect1[@id='ch-system-bzip2']">
500 <xsl:text>make PREFIX=$PKG_DEST/usr install&#xA;</xsl:text>
501 </xsl:when>
502 <xsl:when test="ancestor::sect1[@id='ch-system-sysklogd']">
503 <xsl:text>make BINDIR=$PKG_DEST/sbin prefix=$PKG_DEST install&#xA;</xsl:text>
504 </xsl:when>
505 <xsl:when test="ancestor::sect1[@id='ch-system-iproute2']">
506 <xsl:text>make DESTDIR=$PKG_DEST</xsl:text>
507 <xsl:value-of
508 select="substring-before(substring-after(string(),'DESTDIR='),
509 'install')"/>
510 <xsl:text>install&#xA;</xsl:text>
511 </xsl:when>
512 <xsl:when test="ancestor::sect1[@id='ch-system-sysvinit']">
513 <xsl:text>make ROOT=$PKG_DEST</xsl:text>
514 <xsl:value-of
515 select="substring-before(substring-after(string(),'make'),
516 'install')"/>
517 <xsl:text>install&#xA;</xsl:text>
518 </xsl:when>
519 <xsl:when test="ancestor::sect1[@id='ch-bootable-kernel']">
520 <xsl:text>make INSTALL_MOD_PATH=$PKG_DEST</xsl:text>
521 <xsl:value-of
522 select="substring-before(substring-after(string(),'make'),
523 'install')"/>
524 <xsl:text>install&#xA;</xsl:text>
525 </xsl:when>
526 <xsl:when test="ancestor::sect1[@id='ch-system-attr']">
527 <xsl:text>DIST_ROOT=$PKG_DEST make</xsl:text>
528 <xsl:call-template name="outputpkgdest">
529 <xsl:with-param name="outputstring"
530 select="substring-after($outputstring,'make')"/>
531 </xsl:call-template>
532 </xsl:when>
533 <xsl:otherwise>
534 <xsl:text>make DESTDIR=$PKG_DEST</xsl:text>
535 <xsl:call-template name="outputpkgdest">>
536 <xsl:with-param
537 name="outputstring"
538 select="substring-after($outputstring,'make')"/>
539 </xsl:call-template>
540 </xsl:otherwise>
541 </xsl:choose>
542 </xsl:otherwise>
543 </xsl:choose>
544 </xsl:when>
545 <xsl:otherwise> <!-- no make in this string -->
546 <xsl:choose>
547 <xsl:when test="contains($outputstring,'&gt;/') and
548 not(contains(substring-before($outputstring,'&gt;/'),' /'))">
549 <xsl:value-of select="substring-before($outputstring,'&gt;/')"/>
550 <xsl:text>&gt;$PKG_DEST/</xsl:text>
551 <xsl:call-template name="outputpkgdest">
552 <xsl:with-param name="outputstring" select="substring-after($outputstring,'&gt;/')"/>
553 </xsl:call-template>
554 </xsl:when>
555 <xsl:when test="contains($outputstring,' /')">
556 <xsl:value-of select="substring-before($outputstring,' /')"/>
557 <xsl:text> $PKG_DEST/</xsl:text>
558 <xsl:call-template name="outputpkgdest">
559 <xsl:with-param name="outputstring" select="substring-after($outputstring,' /')"/>
560 </xsl:call-template>
561 </xsl:when>
562 <xsl:otherwise>
563 <xsl:value-of select="$outputstring"/>
564 <xsl:text>&#xA;</xsl:text>
565 </xsl:otherwise>
566 </xsl:choose>
567 </xsl:otherwise>
568 </xsl:choose>
569 </xsl:template>
570</xsl:stylesheet>
Note: See TracBrowser for help on using the repository browser.