Context Navigation

source: LFS/lfs.xsl@ dd08e14

ablfs-more legacy trunk

Last change on this file since dd08e14 was 9bbb9c8, checked in by Pierre Labastie <pierre@…>, 7 years ago
Package management: compute times and sizes without packing times and sizes
Property mode set to `100644`
File size: 38.8 KB

Line
1	<?xml version="1.0" encoding="ISO-8859-1"?>
2
3	<!-- $Id$ -->
4
5	<xsl:stylesheet
6	xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
7	xmlns:exsl="http://exslt.org/common"
8	extension-element-prefixes="exsl"
9	version="1.0">
10
11	<!-- Parameters -->
12
13	<!-- which revision attribute to include: can only be sysv or systemd,
14	but we leave checking to the caller-->
15	<xsl:param name="revision" select="'sysv'"/>
16
17	<!-- use package management ?
18	n = no, original behavior
19	y = yes, add PKG_DEST to scripts in install commands of chapter06-08
20	-->
21	<xsl:param name="pkgmngt" select="'n'"/>
22
23	<!-- Package management with "porg style" ?
24	n = no, same as pkgmngt description above
25	y = yes, wrap install commands of chapter06-08 into a bash function.
26	note that pkgmngt must be 'y' in this case
27	-->
28	<xsl:param name="wrap-install" select='"n"'/>
29
30	<!-- Run test suites?
31	0 = none
32	1 = only chapter06 critical testsuites
33	2 = all chapter06 testsuites
34	3 = all chapter05 and chapter06 testsuites
35	-->
36	<xsl:param name="testsuite" select="1"/>
37
38	<!-- Bomb on test suites failures?
39	n = no, I want to build the full system and review the logs
40	y = yes, bomb at the first test suite failure to can review the build dir
41	-->
42	<xsl:param name="bomb-testsuite" select="'n'"/>
43
44	<!-- Install vim-lang package? OBSOLETE should always be 'n'-->
45	<xsl:param name="vim-lang" select="'n'"/>
46
47	<!-- Time zone -->
48	<xsl:param name="timezone" select="'GMT'"/>
49
50	<!-- Page size -->
51	<xsl:param name="page" select="'letter'"/>
52
53	<!-- Locale settings -->
54	<xsl:param name="lang" select="'C'"/>
55
56	<!-- Install the whole set of locales -->
57	<xsl:param name='full-locale' select='"n"'/>
58
59	<!-- Hostname -->
60	<xsl:param name='hostname' select='"HOSTNAME"'/>
61
62	<!-- Network parameters: interface, ip, gateway, prefix, broadcast, domain
63	and nameservers -->
64	<xsl:param name='interface' select="'eth0'"/>
65	<xsl:param name='ip' select='"10.0.2.9"'/>
66	<xsl:param name='gateway' select='"10.0.2.2"'/>
67	<xsl:param name='prefix' select='24'/>
68	<xsl:param name='broadcast' select='"10.0.2.255"'/>
69	<xsl:param name='domain' select='"lfs.org"'/>
70	<xsl:param name='nameserver1' select='"10.0.2.3"'/>
71	<xsl:param name='nameserver2' select='"8.8.8.8"'/>
72
73	<!-- End parameters -->
74
75	<xsl:template match="/">
76	<xsl:apply-templates select="//sect1[not(@revision) or
77	@revision=$revision]"/>
78	</xsl:template>
79
80	<xsl:template match="sect1">
81	<!-- Since this xsl:if tag encloses the whole template, it would
82	be much better to transpose this condition to the select part
83	of the "calling" apply-template. But that would change the numbering,
84	so that it would be difficult to compare to previous versions. So for
85	version 2.4, let us keep this -->
86	<xsl:if test="(../@id='chapter-temporary-tools' or
87	../@id='chapter-building-system' or
88	../@id='chapter-bootscripts' or
89	../@id='chapter-bootable') and
90	(sect2[not(@revision) or @revision=$revision]//..\|.)/
91	screen[(not(@role) or @role != 'nodump') and
92	(not(@revision) or @revision=$revision)]/
93	userinput[not(starts-with(string(),'chroot'))]">
94	<!-- The last condition is a hack to allow previous versions of the
95	book where the chroot commands did not have role="nodump".
96	It only works if the chroot command is the only one on the page -->
97	<!-- The dirs names -->
98	<xsl:variable name="pi-dir" select="../processing-instruction('dbhtml')"/>
99	<xsl:variable name="pi-dir-value" select="substring-after($pi-dir,'dir=')"/>
100	<xsl:variable name="quote-dir" select="substring($pi-dir-value,1,1)"/>
101	<xsl:variable name="dirname" select="substring-before(substring($pi-dir-value,2),$quote-dir)"/>
102	<!-- The file names -->
103	<xsl:variable name="pi-file" select="processing-instruction('dbhtml')"/>
104	<xsl:variable name="pi-file-value" select="substring-after($pi-file,'filename=')"/>
105	<xsl:variable name="filename" select="substring-before(substring($pi-file-value,2),'.html')"/>
106	<!-- The build order -->
107	<xsl:variable name="position" select="position()"/>
108	<xsl:variable name="order">
109	<xsl:choose>
110	<xsl:when test="string-length($position) = 1">
111	<xsl:text>00</xsl:text>
112	<xsl:value-of select="$position"/>
113	</xsl:when>
114	<xsl:when test="string-length($position) = 2">
115	<xsl:text>0</xsl:text>
116	<xsl:value-of select="$position"/>
117	</xsl:when>
118	<xsl:otherwise>
119	<xsl:value-of select="$position"/>
120	</xsl:otherwise>
121	</xsl:choose>
122	</xsl:variable>
123	<!-- Inclusion of package manager scriptlets -->
124	<xsl:if test="@id='ch-tools-stripping' and $pkgmngt='y'">
125	<xsl:apply-templates
126	select="document('packageManager.xml')//sect1[contains(@id,'ch-tools')]"
127	mode="pkgmngt">
128	<xsl:with-param name="order" select="$order"/>
129	<xsl:with-param name="dirname" select="$dirname"/>
130	</xsl:apply-templates>
131	</xsl:if>
132	<xsl:if test="@id='ch-system-strippingagain' and $pkgmngt='y'">
133	<xsl:apply-templates
134	select="document('packageManager.xml')//sect1[contains(@id,'ch-system')]"
135	mode="pkgmngt">
136	<xsl:with-param name="order" select="$order"/>
137	<xsl:with-param name="dirname" select="$dirname"/>
138	</xsl:apply-templates>
139	</xsl:if>
140	<!-- Creating dirs and files -->
141	<exsl:document href="{$dirname}/{$order}-{$filename}" method="text">
142	<xsl:choose>
143	<xsl:when test="@id='ch-system-creatingdirs' or
144	@id='ch-system-createfiles' or
145	@id='ch-system-strippingagain'">
146	<xsl:text>#!/tools/bin/bash set +h </xsl:text>
147	</xsl:when>
148	<xsl:otherwise>
149	<xsl:text>#!/bin/bash set +h </xsl:text>
150	</xsl:otherwise>
151	</xsl:choose>
152	<xsl:if test="not(@id='ch-tools-stripping') and
153	not(@id='ch-system-strippingagain')">
154	<xsl:text>set -e </xsl:text>
155	</xsl:if>
156	<xsl:text> </xsl:text>
157	<xsl:if test="sect2[@role='installation']">
158	<xsl:text>cd $PKGDIR </xsl:text>
159	</xsl:if>
160	<xsl:apply-templates select="sect2[not(@revision) or
161	@revision=$revision] \|
162	screen[(not(@role) or
163	@role!='nodump') and
164	(not(@revision) or
165	@revision=$revision)]/userinput"/>
166	<xsl:if test="@id='ch-system-creatingdirs' and $pkgmngt='y'">
167	<xsl:apply-templates
168	select="document('packageManager.xml')//sect1[
169	@id='ch-pkgmngt-creatingdirs'
170	]//userinput"
171	mode="pkgmngt"/>
172	</xsl:if>
173	<xsl:if test="@id='ch-system-createfiles' and $pkgmngt='y'">
174	<xsl:apply-templates
175	select="document('packageManager.xml')//sect1[
176	@id='ch-pkgmngt-createfiles'
177	]//userinput"
178	mode="pkgmngt"/>
179	</xsl:if>
180	<xsl:text>echo -e "\n\nTotalseconds: $SECONDS\n" </xsl:text>
181	<xsl:text>exit </xsl:text>
182	</exsl:document>
183	</xsl:if>
184	</xsl:template>
185
186	<xsl:template match="sect2">
187	<xsl:apply-templates
188	select=".//screen[(not(@role) or
189	@role != 'nodump') and
190	(not(@revision) or
191	@revision=$revision)]/userinput[
192	@remap = 'pre' or
193	@remap = 'configure' or
194	@remap = 'make' or
195	@remap = 'test' and
196	not(current()/../@id='ch-tools-dejagnu') and
197	not(current()/../@id='ch-system-systemd')]"/>
198	<xsl:if
199	test="ancestor::chapter[@id != 'chapter-temporary-tools'] and
200	$pkgmngt = 'y' and
201	descendant::screen[not(@role) or
202	@role != 'nodump']/userinput[
203	@remap='install']">
204	<xsl:choose>
205	<xsl:when test="$wrap-install='y'">
206	<xsl:text>wrapInstall '
207	</xsl:text>
208	</xsl:when>
209	<xsl:otherwise>
210	<xsl:text>mkdir -pv $PKG_DEST/{boot,etc,lib,bin,sbin}
211	mkdir -pv $PKG_DEST/usr/{lib,bin,sbin,include}
212	mkdir -pv $PKG_DEST/usr/share/{doc,info,man}
213	mkdir -pv $PKG_DEST/usr/share/man/man{1..8}
214	ln -sv share/{man,doc,info} $PKG_DEST/usr
215	case $(uname -m) in
216	x86_64) ln -sv lib $PKG_DEST/lib64 && ln -sv lib $PKG_DEST/usr/lib64 ;;
217	esac
218	</xsl:text>
219	</xsl:otherwise>
220	</xsl:choose>
221	</xsl:if>
222	<xsl:if test="../@id = 'ch-system-glibc' and
223	@role='installation' and
224	$pkgmngt = 'y' and
225	$wrap-install = 'n'">
226	<xsl:text>mkdir -pv $PKG_DEST/usr/include/{rpc,rpcsvc}
227	</xsl:text>
228	</xsl:if>
229	<xsl:apply-templates
230	select=".//screen[(not(@role) or
231	@role != 'nodump') and
232	(not(@revision) or
233	@revision=$revision)]/userinput[@remap = 'install']"/>
234	<xsl:if test="ancestor::chapter[@id != 'chapter-temporary-tools'] and
235	$pkgmngt = 'y' and
236	descendant::screen[not(@role) or
237	@role != 'nodump']/userinput[
238	@remap='install']">
239	<xsl:choose>
240	<xsl:when test="$wrap-install='y'">
241	<xsl:if test="../@id = 'ch-system-man-pages'">
242	<!-- these files are provided by the shadow package -->
243	<xsl:text>rm -fv /usr/share/man/{man3/getspnam.3,man5/passwd.5}
244	</xsl:text>
245	</xsl:if>
246	<!-- Attr man/man2 pages are already installed by man-pages. As of
247	March 2013, they are the same pages.
248	November 2015: now they are more accurate
249	in man-pages, and the man5 section is also in man-pages... -->
250	<xsl:if test="../@id = 'ch-system-attr'">
251	<xsl:text>rm -fv /usr/share/man/man2/*
252	rm -fv /usr/share/man/man5/*
253	</xsl:text>
254	</xsl:if>
255	<!-- nologin is installed by util-linux. remove it from shadow -->
256	<xsl:if test="../@id = 'ch-system-shadow'">
257	<xsl:text>rm -fv /usr/share/man/man8/nologin.8
258	rm -fv /sbin/nologin
259	</xsl:text>
260	</xsl:if>
261	<xsl:text>'
262	PREV_SEC=${SECONDS}
263	packInstall
264	SECONDS=${PREV_SEC}
265	</xsl:text>
266	</xsl:when>
267	<xsl:otherwise>
268	<xsl:if test="../@id = 'ch-system-man-pages'">
269	<!-- these files are provided by the shadow package -->
270	<xsl:text>rm -fv $PKG_DEST/usr/share/man/{man3/getspnam.3,man5/passwd.5}
271	</xsl:text>
272	</xsl:if>
273	<!-- Attr man/man2 pages are already installed by man-pages. As of
274	March 2013, they are the same pages.
275	November 2015: now they are more accurate
276	in man-pages, and the man5 section is also in man-pages... -->
277	<xsl:if test="../@id = 'ch-system-attr'">
278	<xsl:text>rm -fv $PKG_DEST/usr/share/man/man2/*
279	rm -fv $PKG_DEST/usr/share/man/man5/*
280	</xsl:text>
281	</xsl:if>
282	<!-- nologin is installed by util-linux. remove it from shadow -->
283	<xsl:if test="../@id = 'ch-system-shadow'">
284	<xsl:text>rm -fv $PKG_DEST/usr/share/man/man8/nologin.8
285	rm -fv $PKG_DEST/sbin/nologin
286	</xsl:text>
287	</xsl:if>
288	<xsl:text>rm -fv $PKG_DEST/{,usr/}lib64
289	rm -fv $PKG_DEST/usr/{man,doc,info}
290	for dir in $PKG_DEST/usr/share/man/man{1..8}; do
291	[[ -z $(ls $dir) ]] && rmdir -v $dir
292	done
293	for dir in $PKG_DEST/usr/share/{doc,info,man}; do
294	[[ -z $(ls $dir) ]] && rmdir -v $dir
295	done
296	for dir in $PKG_DEST/usr/{lib,bin,sbin,include}; do
297	[[ -z $(ls $dir) ]] && rmdir -v $dir
298	done
299	for dir in $PKG_DEST/{boot,etc,lib,bin,sbin}; do
300	[[ -z $(ls $dir) ]] && rmdir -v $dir
301	done
302	PREV_SEC=${SECONDS}
303	packInstall
304	SECONDS=${PREV_SEC}
305	rm -rf $PKG_DEST
306	</xsl:text>
307	</xsl:otherwise>
308	</xsl:choose>
309	</xsl:if>
310	<xsl:if test="$testsuite='3' and
311	../@id='ch-tools-glibc' and
312	@role='installation'">
313	<xsl:copy-of select="//userinput[@remap='locale-test']"/>
314	<xsl:text> </xsl:text>
315	</xsl:if>
316	<xsl:if test="../@id='ch-system-glibc' and @role='installation'">
317	<xsl:choose>
318	<xsl:when test="$full-locale='y'">
319	<xsl:copy-of select="//userinput[@remap='locale-full']"/>
320	<xsl:text> </xsl:text>
321	</xsl:when>
322	<xsl:otherwise>
323	<xsl:copy-of select="//userinput[@remap='locale-test']"/>
324	<xsl:text> </xsl:text>
325	<xsl:if test="not(contains(string(//userinput[@remap='locale-test']),$lang)) and $lang!='C' and $lang!='POSIX'">
326	<xsl:text>if LOCALE=`grep "</xsl:text>
327	<xsl:value-of select="$lang"/>
328	<xsl:text>/" $PKGDIR/localedata/SUPPORTED`; then
329	CHARMAP=`echo $LOCALE \| sed 's,[^/]/\([^ ]\) [\],\1,'`
330	INPUT=`echo $LOCALE \| sed 's,[/.].*,,'`
331	LOCALE=`echo $LOCALE \| sed 's,/.*,,'`
332	localedef -i $INPUT -f $CHARMAP $LOCALE
333	fi
334	</xsl:text>
335	</xsl:if>
336	</xsl:otherwise>
337	</xsl:choose>
338	</xsl:if>
339	<xsl:apply-templates
340	select=".//screen[
341	(not(@role) or
342	@role != 'nodump') and
343	(not(@revision) or
344	@revision=$revision)
345	]/userinput[
346	not(@remap) or
347	@remap='adjust' or
348	@remap='test' and current()/../@id='ch-tools-dejagnu' or
349	@remap='test' and current()/../@id='ch-system-systemd'
350	]"/>
351	</xsl:template>
352
353	<xsl:template match="sect1" mode="pkgmngt">
354	<xsl:param name="dirname" select="chapter05"/>
355	<!-- The build order -->
356	<xsl:param name="order" select="062"/>
357	<!-- The file names -->
358	<xsl:variable name="pi-file" select="processing-instruction('dbhtml')"/>
359	<xsl:variable name="pi-file-value" select="substring-after($pi-file,'filename=')"/>
360	<xsl:variable name="filename" select="substring-before(substring($pi-file-value,2),'.html')"/>
361	<!-- Creating dirs and files -->
362	<xsl:if test="count(descendant::screen/userinput) > 0 and
363	count(descendant::screen/userinput) >
364	count(descendant::screen[@role='nodump'])">
365	<exsl:document href="{$dirname}/{$order}-{position()}-{$filename}"
366	method="text">
367	<xsl:text>#!/bin/bash
368	set +h
369	set -e
370
371	cd $PKGDIR
372	</xsl:text>
373	<xsl:apply-templates
374	select=".//screen[not(@role) or
375	@role != 'nodump']/userinput[@remap != 'adjust']"
376	mode="pkgmngt"/>
377	<xsl:if test="$dirname = 'chapter06'">
378	<xsl:text>PREV_SEC=${SECONDS}
379	packInstall
380	SECONDS=${PREV_SEC}
381	rm -rf "$PKG_DEST"
382	</xsl:text>
383	</xsl:if>
384	<xsl:apply-templates
385	select=".//screen[not(@role) or
386	@role != 'nodump'
387	]/userinput[not(@remap) or
388	@remap='adjust'
389	]"
390	mode="pkgmngt"/>
391	<xsl:text>
392	echo -e "\n\nTotalseconds: $SECONDS\n"
393	exit
394	</xsl:text>
395	</exsl:document>
396	</xsl:if>
397	</xsl:template>
398
399	<xsl:template match="userinput" mode="pkgmngt">
400	<xsl:apply-templates/>
401	<xsl:text> </xsl:text>
402	</xsl:template>
403
404	<xsl:template match="userinput">
405	<xsl:choose>
406	<!-- Copying the kernel config file -->
407	<xsl:when test="string() = 'make mrproper'">
408	<xsl:text>make mrproper </xsl:text>
409	<xsl:if test="ancestor::sect1[@id='ch-bootable-kernel']">
410	<xsl:text>cp -v ../kernel-config .config </xsl:text>
411	</xsl:if>
412	</xsl:when>
413	<!-- test instructions -->
414	<xsl:when test="@remap = 'test'">
415	<xsl:choose>
416	<xsl:when test="$testsuite = '0'"/>
417	<xsl:when test="$testsuite = '1' and
418	not(ancestor::sect1[@id='ch-system-gcc']) and
419	not(ancestor::sect1[@id='ch-system-glibc']) and
420	not(ancestor::sect1[@id='ch-system-gmp']) and
421	not(ancestor::sect1[@id='ch-system-mpfr']) and
422	not(ancestor::sect1[@id='ch-system-binutils'])"/>
423	<xsl:when test="$testsuite = '2' and
424	ancestor::chapter[@id='chapter-temporary-tools']"/>
425	<xsl:otherwise>
426	<xsl:choose>
427	<xsl:when test="$bomb-testsuite = 'n'">
428	<xsl:choose>
429	<!-- special case for glibc -->
430	<xsl:when test="contains(string(), 'glibc-check-log')">
431	<xsl:value-of
432	select="substring-before(string(),'2>&1')"/>
433	<xsl:text>>> $TEST_LOG 2>&1 \|\| true </xsl:text>
434	</xsl:when>
435	<!-- special case for procps-ng -->
436	<xsl:when test="contains(string(), 'pushd')">
437	<xsl:text>{ </xsl:text>
438	<xsl:apply-templates/>
439	<xsl:text>; } >> $TEST_LOG 2>&1 \|\| true </xsl:text>
440	</xsl:when>
441	<xsl:when test="contains(string(), 'make -k')">
442	<xsl:apply-templates/>
443	<xsl:text> >> $TEST_LOG 2>&1 \|\| true </xsl:text>
444	</xsl:when>
445	<xsl:when test="contains(string(), 'make')">
446	<xsl:value-of select="substring-before(string(),'make')"/>
447	<xsl:text>make -k</xsl:text>
448	<xsl:value-of select="substring-after(string(),'make')"/>
449	<xsl:text> >> $TEST_LOG 2>&1 \|\| true </xsl:text>
450	</xsl:when>
451	<xsl:otherwise>
452	<xsl:apply-templates/>
453	<xsl:if test="not(contains(string(), '>>'))">
454	<xsl:text> >> $TEST_LOG 2>&1</xsl:text>
455	</xsl:if>
456	<xsl:text> </xsl:text>
457	</xsl:otherwise>
458	</xsl:choose>
459	</xsl:when>
460	<xsl:otherwise>
461	<!-- bomb-testsuite != 'n'-->
462	<xsl:choose>
463	<!-- special case for glibc -->
464	<xsl:when test="contains(string(), 'glibc-check-log')">
465	<xsl:value-of
466	select="substring-before(string(),'2>&1')"/>
467	<xsl:text>>> $TEST_LOG 2>&1 \|\| true </xsl:text>
468	</xsl:when>
469	<!-- special case for gmp -->
470	<xsl:when test="contains(string(), 'tee gmp-check-log')">
471	<xsl:text>(</xsl:text>
472	<xsl:apply-templates/>
473	<xsl:text>>> $TEST_LOG 2>&1 && exit $PIPESTATUS) </xsl:text>
474	</xsl:when>
475	<!-- special case for procps-ng -->
476	<xsl:when test="contains(string(), 'pushd')">
477	<xsl:text>{ </xsl:text>
478	<xsl:apply-templates/>
479	<xsl:text>; } >> $TEST_LOG 2>&1 </xsl:text>
480	</xsl:when>
481	<xsl:when test="contains(string(), 'make -k')">
482	<xsl:apply-templates/>
483	<xsl:text> >> $TEST_LOG 2>&1 \|\| true </xsl:text>
484	</xsl:when>
485	<xsl:otherwise>
486	<xsl:apply-templates/>
487	<xsl:if test="not(contains(string(), '>>'))">
488	<xsl:text> >> $TEST_LOG 2>&1</xsl:text>
489	</xsl:if>
490	<xsl:text> </xsl:text>
491	</xsl:otherwise>
492	</xsl:choose>
493	</xsl:otherwise>
494	</xsl:choose>
495	</xsl:otherwise>
496	</xsl:choose>
497	</xsl:when>
498	<!-- End of test instructions -->
499	<!-- Don't stop on strip run -->
500	<xsl:when test="contains(string(),'strip ')">
501	<xsl:apply-templates/>
502	<xsl:text> \|\| true </xsl:text>
503	</xsl:when>
504	<!-- Package management -->
505	<!-- Add $PKG_DEST to installation commands -->
506	<xsl:when test="@remap='install' and
507	not(ancestor::chapter[
508	@id='chapter-temporary-tools'
509	])">
510	<xsl:choose>
511	<xsl:when test="$pkgmngt='n'">
512	<xsl:choose>
513	<xsl:when test="contains(string(),'firmware,udev')">
514	<xsl:text>if [[ ! -d /lib/udev/devices ]] ; then </xsl:text>
515	<xsl:apply-templates/>
516	<xsl:text> fi </xsl:text>
517	</xsl:when>
518	<xsl:otherwise>
519	<xsl:apply-templates/>
520	<xsl:text> </xsl:text>
521	</xsl:otherwise>
522	</xsl:choose>
523	</xsl:when>
524	<xsl:when test="$wrap-install='y'">
525	<xsl:choose>
526	<xsl:when test="./literal">
527	<xsl:call-template name="output-wrap">
528	<xsl:with-param name="commands" select="text()[1]"/>
529	</xsl:call-template>
530	<xsl:apply-templates select="literal"/>
531	<xsl:call-template name="output-wrap">
532	<xsl:with-param name="commands" select="text()[2]"/>
533	</xsl:call-template>
534	</xsl:when>
535	<xsl:otherwise>
536	<xsl:call-template name="output-wrap">
537	<xsl:with-param name="commands" select="string()"/>
538	</xsl:call-template>
539	</xsl:otherwise>
540	</xsl:choose>
541	<xsl:text> </xsl:text>
542	</xsl:when>
543	<xsl:otherwise><!--pkgmngt = 'y' and wrap-install='n'-->
544	<xsl:choose>
545	<xsl:when test="./literal">
546	<xsl:call-template name="outputpkgdest">
547	<xsl:with-param name="outputstring" select="text()[1]"/>
548	</xsl:call-template>
549	<xsl:apply-templates select="literal"/>
550	<xsl:call-template name="outputpkgdest">
551	<xsl:with-param name="outputstring" select="text()[2]"/>
552	</xsl:call-template>
553	</xsl:when>
554	<xsl:otherwise>
555	<xsl:call-template name="outputpkgdest">
556	<xsl:with-param name="outputstring" select="string()"/>
557	</xsl:call-template>
558	</xsl:otherwise>
559	</xsl:choose>
560	</xsl:otherwise>
561	</xsl:choose>
562	</xsl:when>
563	<!-- if package management, we should make an independant package for
564	tzdata. -->
565	<xsl:when test="contains(string(),'tzdata') and $pkgmngt='y'">
566	<xsl:text>
567	OLD_PKG_DEST="$PKG_DEST"
568	OLD_PKGDIR=$PKGDIR
569	PKG_DEST=$(dirname $OLD_PKG_DEST)/001-tzdata
570	PKGDIR=$(dirname $PKGDIR)/tzdata-</xsl:text>
571	<xsl:copy-of select="substring-before(
572	substring-after(string(),'tzdata'),
573	'.tar')"/>
574	<xsl:text>
575	</xsl:text>
576	<xsl:choose>
577	<xsl:when test="$wrap-install='n'">
578	<xsl:copy-of select="substring-before(string(),'ZONEINFO=')"/>
579	<xsl:text>ZONEINFO=$PKG_DEST</xsl:text>
580	<xsl:copy-of select="substring-after(string(),'ZONEINFO=')"/>
581	<xsl:text>
582	PREV_SEC=${SECONDS}
583	packInstall
584	SECONDS=${PREV_SEC}
585	rm -rf $PKG_DEST
586	</xsl:text>
587	</xsl:when>
588	<xsl:otherwise><!-- wrap-install='y' -->
589	<xsl:copy-of select="substring-before(string(),'ZONEINFO=')"/>
590	<xsl:text>
591	wrapInstall '
592	ZONEINFO=</xsl:text>
593	<xsl:copy-of select="substring-after(string(),'ZONEINFO=')"/>
594	<xsl:text>'
595	PREV_SEC=${SECONDS}
596	packInstall
597	SECONDS=${PREV_SEC}
598	</xsl:text>
599	</xsl:otherwise>
600	</xsl:choose>
601	<xsl:text>
602	PKG_DEST=$OLD_PKG_DEST
603	unset OLD_PKG_DEST
604	PKGDIR=$OLD_PKGDIR
605	unset OLD_PKGDIR
606	</xsl:text>
607	</xsl:when><!-- addition for tzdata + package management -->
608	<!-- End addition for package management -->
609	<!-- The rest of commands -->
610	<xsl:otherwise>
611	<xsl:apply-templates/>
612	<xsl:text> </xsl:text>
613	</xsl:otherwise>
614	</xsl:choose>
615	</xsl:template>
616
617	<xsl:template match="replaceable">
618	<xsl:choose>
619	<xsl:when test="ancestor::sect1[@id='ch-system-glibc']">
620	<xsl:value-of select="$timezone"/>
621	</xsl:when>
622	<xsl:when test="ancestor::sect1[@id='ch-system-groff']">
623	<xsl:value-of select="$page"/>
624	</xsl:when>
625	<xsl:when test="contains(string(.),'<ll>_<CC>')">
626	<xsl:value-of select="$lang"/>
627	</xsl:when>
628	<xsl:when test="contains(string(.),'Domain')">
629	<xsl:value-of select="$domain"/>
630	</xsl:when>
631	<xsl:when test="contains(string(.),'primary')">
632	<xsl:value-of select="$nameserver1"/>
633	</xsl:when>
634	<xsl:when test="contains(string(.),'secondary')">
635	<xsl:value-of select="$nameserver2"/>
636	</xsl:when>
637	<xsl:when test="contains(string(.),'192.168.1.1')">
638	<xsl:value-of select="$ip"/>
639	</xsl:when>
640	<xsl:when test="contains(string(.),'192.168.0.2')">
641	<xsl:value-of select="$ip"/>
642	</xsl:when>
643	<!-- Only adapted to LFS-20170310 and later -->
644	<xsl:when test="contains(string(.),'HOSTNAME')">
645	<xsl:value-of select="$hostname"/>
646	</xsl:when>
647	<xsl:when test="contains(string(.),'FQDN')">
648	<xsl:value-of select="$hostname"/>
649	<xsl:text>.</xsl:text>
650	<xsl:value-of select="$domain"/>
651	</xsl:when>
652	<xsl:when test="contains(string(.),'alias')"/>
653	<xsl:when test="contains(string(.),'<lfs>')">
654	<xsl:value-of select="$hostname"/>
655	</xsl:when>
656	<xsl:otherwise>
657	<xsl:text>**EDITME</xsl:text>
658	<xsl:apply-templates/>
659	<xsl:text>EDITME**</xsl:text>
660	</xsl:otherwise>
661	</xsl:choose>
662	</xsl:template>
663
664	<xsl:template match="literal">
665	<xsl:choose>
666	<xsl:when test="contains(string(),'ONBOOT')">
667	<xsl:call-template name="outputnet">
668	<xsl:with-param name="netstring" select="string()"/>
669	</xsl:call-template>
670	</xsl:when>
671	<xsl:when test="contains(string(),'[Match]')">
672	<xsl:call-template name="outputsysdnet">
673	<xsl:with-param name="netstring" select="string()"/>
674	</xsl:call-template>
675	</xsl:when>
676	<xsl:otherwise>
677	<xsl:apply-templates/>
678	</xsl:otherwise>
679	</xsl:choose>
680	</xsl:template>
681
682	<xsl:template name="outputnet">
683	<xsl:param name="netstring" select="''"/>
684	<!-- We suppose that book example has the following values:
685	- interface: eth0
686	- ip: 192.168.1.2
687	- gateway: 192.168.1.1
688	- prefix: 24
689	- broadcast: 192.168.1.255
690	Change below if book changes -->
691	<xsl:choose>
692	<xsl:when test="contains($netstring,'eth0')">
693	<xsl:call-template name="outputnet">
694	<xsl:with-param name="netstring"
695	select="substring-before($netstring,'eth0')"/>
696	</xsl:call-template>
697	<xsl:value-of select="$interface"/>
698	<xsl:call-template name="outputnet">
699	<xsl:with-param name="netstring"
700	select="substring-after($netstring,'eth0')"/>
701	</xsl:call-template>
702	</xsl:when>
703	<xsl:when test="contains($netstring,'192.168.1.1')">
704	<xsl:call-template name="outputnet">
705	<xsl:with-param name="netstring"
706	select="substring-before($netstring,'192.168.1.1')"/>
707	</xsl:call-template>
708	<xsl:value-of select="$gateway"/>
709	<xsl:call-template name="outputnet">
710	<xsl:with-param name="netstring"
711	select="substring-after($netstring,'192.168.1.1')"/>
712	</xsl:call-template>
713	</xsl:when>
714	<!-- must test this before the following, because 192.168.1.255 contains
715	192.168.1.2! -->
716	<xsl:when test="contains($netstring,'192.168.1.255')">
717	<xsl:call-template name="outputnet">
718	<xsl:with-param name="netstring"
719	select="substring-before($netstring,'192.168.1.255')"/>
720	</xsl:call-template>
721	<xsl:value-of select="$broadcast"/>
722	<xsl:call-template name="outputnet">
723	<xsl:with-param name="netstring"
724	select="substring-after($netstring,'192.168.1.255')"/>
725	</xsl:call-template>
726	</xsl:when>
727	<xsl:when test="contains($netstring,'192.168.1.2')">
728	<xsl:call-template name="outputnet">
729	<xsl:with-param name="netstring"
730	select="substring-before($netstring,'192.168.1.2')"/>
731	</xsl:call-template>
732	<xsl:value-of select="$ip"/>
733	<xsl:call-template name="outputnet">
734	<xsl:with-param name="netstring"
735	select="substring-after($netstring,'192.168.1.2')"/>
736	</xsl:call-template>
737	</xsl:when>
738	<xsl:when test="contains($netstring,'24')">
739	<xsl:call-template name="outputnet">
740	<xsl:with-param name="netstring"
741	select="substring-before($netstring,'24')"/>
742	</xsl:call-template>
743	<xsl:value-of select="$prefix"/>
744	<xsl:call-template name="outputnet">
745	<xsl:with-param name="netstring"
746	select="substring-after($netstring,'24')"/>
747	</xsl:call-template>
748	</xsl:when>
749	<xsl:otherwise>
750	<xsl:value-of select="$netstring"/>
751	</xsl:otherwise>
752	</xsl:choose>
753	</xsl:template>
754
755	<xsl:template name="outputsysdnet">
756	<xsl:param name="netstring" select="''"/>
757	<!-- We suppose that book example has the following values:
758	- interface: eth0
759	- ip: 192.168.0.2
760	- gateway: 192.168.0.1
761	- prefix: 24
762	- DNS: 192.168.0.1
763	- Domain: <Your Domain Name>
764	and gateway comes before DNS. Change below if book changes -->
765	<xsl:choose>
766	<xsl:when test="contains($netstring,'eth0')">
767	<xsl:call-template name="outputsysdnet">
768	<xsl:with-param name="netstring"
769	select="substring-before($netstring,'eth0')"/>
770	</xsl:call-template>
771	<xsl:value-of select="$interface"/>
772	<xsl:call-template name="outputsysdnet">
773	<xsl:with-param name="netstring"
774	select="substring-after($netstring,'eth0')"/>
775	</xsl:call-template>
776	</xsl:when>
777	<xsl:when test="contains($netstring,'192.168.0.1') and
778	contains($netstring,'Gateway')">
779	<xsl:call-template name="outputsysdnet">
780	<xsl:with-param name="netstring"
781	select="substring-before($netstring,'192.168.0.1')"/>
782	</xsl:call-template>
783	<xsl:value-of select="$gateway"/>
784	<xsl:call-template name="outputsysdnet">
785	<xsl:with-param name="netstring"
786	select="substring-after($netstring,'192.168.0.1')"/>
787	</xsl:call-template>
788	</xsl:when>
789	<xsl:when test="contains($netstring,'192.168.0.1') and
790	not(contains($netstring,'Gateway'))">
791	<xsl:call-template name="outputsysdnet">
792	<xsl:with-param name="netstring"
793	select="substring-before($netstring,'192.168.0.1')"/>
794	</xsl:call-template>
795	<xsl:value-of select="$nameserver1"/>
796	<xsl:text>
797	DNS=</xsl:text>
798	<xsl:value-of select="$nameserver2"/>
799	<xsl:call-template name="outputsysdnet">
800	<xsl:with-param name="netstring"
801	select="substring-after($netstring,'192.168.0.1')"/>
802	</xsl:call-template>
803	</xsl:when>
804	<xsl:when test="contains($netstring,'192.168.0.2')">
805	<xsl:call-template name="outputsysdnet">
806	<xsl:with-param name="netstring"
807	select="substring-before($netstring,'192.168.0.2')"/>
808	</xsl:call-template>
809	<xsl:value-of select="$ip"/>
810	<xsl:call-template name="outputsysdnet">
811	<xsl:with-param name="netstring"
812	select="substring-after($netstring,'192.168.0.2')"/>
813	</xsl:call-template>
814	</xsl:when>
815	<xsl:when test="contains($netstring,'24')">
816	<xsl:call-template name="outputsysdnet">
817	<xsl:with-param name="netstring"
818	select="substring-before($netstring,'24')"/>
819	</xsl:call-template>
820	<xsl:value-of select="$prefix"/>
821	<xsl:call-template name="outputsysdnet">
822	<xsl:with-param name="netstring"
823	select="substring-after($netstring,'24')"/>
824	</xsl:call-template>
825	</xsl:when>
826	<xsl:when test="contains($netstring,'<Your Domain Name>')">
827	<xsl:call-template name="outputsysdnet">
828	<xsl:with-param name="netstring"
829	select="substring-before($netstring,'<Your Domain Name>')"/>
830	</xsl:call-template>
831	<xsl:value-of select="$domain"/>
832	<xsl:call-template name="outputsysdnet">
833	<xsl:with-param name="netstring"
834	select="substring-after($netstring,'<Your Domain Name>')"/>
835	</xsl:call-template>
836	</xsl:when>
837	<xsl:otherwise>
838	<xsl:value-of select="$netstring"/>
839	</xsl:otherwise>
840	</xsl:choose>
841	</xsl:template>
842
843	<xsl:template name="outputpkgdest">
844	<xsl:param name="outputstring" select="foo"/>
845	<xsl:choose>
846	<xsl:when test="contains($outputstring,'make ')">
847	<xsl:choose>
848	<xsl:when test="not(starts-with($outputstring,'make'))">
849	<xsl:call-template name="outputpkgdest">
850	<xsl:with-param name="outputstring"
851	select="substring-before($outputstring,'make')"/>
852	</xsl:call-template>
853	<xsl:call-template name="outputpkgdest">
854	<xsl:with-param
855	name="outputstring"
856	select="substring-after($outputstring,
857	substring-before($outputstring,'make'))"/>
858	</xsl:call-template>
859	</xsl:when>
860	<xsl:otherwise>
861	<xsl:choose>
862	<!-- special cases (no DESTDIR) here -->
863	<xsl:when test="ancestor::sect1[@id='ch-system-glibc']">
864	<xsl:text>make install_root=$PKG_DEST -j1</xsl:text>
865	<xsl:value-of
866	select="substring-before(substring-after(string(),'make'),
867	'install')"/>
868	<xsl:text>install </xsl:text>
869	</xsl:when>
870	<xsl:when test="ancestor::sect1[@id='ch-system-bzip2']">
871	<xsl:text>make PREFIX=$PKG_DEST/usr install </xsl:text>
872	</xsl:when>
873	<xsl:when test="ancestor::sect1[@id='ch-system-sysklogd']">
874	<xsl:text>make BINDIR=$PKG_DEST/sbin prefix=$PKG_DEST install </xsl:text>
875	</xsl:when>
876	<xsl:when test="ancestor::sect1[@id='ch-system-iproute2']">
877	<xsl:text>make DESTDIR=$PKG_DEST DOCDIR=</xsl:text>
878	<xsl:value-of
879	select="substring-before(substring-after(string(),'DOCDIR='),
880	'install')"/>
881	<xsl:text>install </xsl:text>
882	</xsl:when>
883	<xsl:when test="ancestor::sect1[@id='ch-system-sysvinit']">
884	<xsl:text>make ROOT=$PKG_DEST</xsl:text>
885	<xsl:value-of
886	select="substring-before(substring-after(string(),'make'),
887	'install')"/>
888	<xsl:text>install </xsl:text>
889	</xsl:when>
890	<xsl:when test="ancestor::sect1[@id='ch-bootable-kernel']">
891	<xsl:text>make INSTALL_MOD_PATH=$PKG_DEST</xsl:text>
892	<xsl:value-of
893	select="substring-before(substring-after(string(),'make'),
894	'install')"/>
895	<xsl:text>install </xsl:text>
896	</xsl:when>
897	<xsl:when test="ancestor::sect1[@id='ch-system-attr']">
898	<xsl:text>DIST_ROOT=$PKG_DEST make</xsl:text>
899	<xsl:call-template name="outputpkgdest">
900	<xsl:with-param name="outputstring"
901	select="substring-after($outputstring,'make')"/>
902	</xsl:call-template>
903	</xsl:when>
904	<xsl:otherwise>
905	<xsl:text>make DESTDIR=$PKG_DEST</xsl:text>
906	<xsl:call-template name="outputpkgdest">
907	<xsl:with-param
908	name="outputstring"
909	select="substring-after($outputstring,'make')"/>
910	</xsl:call-template>
911	</xsl:otherwise>
912	</xsl:choose>
913	</xsl:otherwise>
914	</xsl:choose>
915	</xsl:when>
916	<xsl:otherwise> <!-- no make in this string -->
917	<xsl:choose>
918	<xsl:when test="contains($outputstring,'>/') and
919	not(contains(substring-before($outputstring,'>/'),' /'))">
920	<xsl:value-of select="substring-before($outputstring,'>/')"/>
921	<xsl:text>>$PKG_DEST/</xsl:text>
922	<xsl:call-template name="outputpkgdest">
923	<xsl:with-param name="outputstring" select="substring-after($outputstring,'>/')"/>
924	</xsl:call-template>
925	</xsl:when>
926	<xsl:when test="contains($outputstring,' /')">
927	<xsl:value-of select="substring-before($outputstring,' /')"/>
928	<xsl:text> $PKG_DEST/</xsl:text>
929	<xsl:call-template name="outputpkgdest">
930	<xsl:with-param name="outputstring" select="substring-after($outputstring,' /')"/>
931	</xsl:call-template>
932	</xsl:when>
933	<xsl:otherwise>
934	<xsl:value-of select="$outputstring"/>
935	<xsl:text> </xsl:text>
936	</xsl:otherwise>
937	</xsl:choose>
938	</xsl:otherwise>
939	</xsl:choose>
940	</xsl:template>
941
942	<xsl:variable name="APOS">'</xsl:variable>
943	<xsl:template name="output-wrap">
944	<xsl:param name="commands" select="''"/>
945	<xsl:choose>
946	<xsl:when test="contains($commands,string($APOS))">
947	<xsl:call-template name="output-wrap">
948	<xsl:with-param name="commands"
949	select="substring-before($commands,string($APOS))"/>
950	</xsl:call-template>
951	<xsl:text>'\''</xsl:text>
952	<xsl:call-template name="output-wrap">
953	<xsl:with-param name="commands"
954	select="substring-after($commands,string($APOS))"/>
955	</xsl:call-template>
956	</xsl:when>
957	<xsl:otherwise>
958	<xsl:value-of select="$commands"/>
959	</xsl:otherwise>
960	</xsl:choose>
961	</xsl:template>
962
963	</xsl:stylesheet>

Note: See TracBrowser for help on using the repository browser.

Download in other formats: