Context Navigation

source: LFS/lfs.xsl@ e7f93a0

new_features

Last change on this file since e7f93a0 was 580d773, checked in by Pierre Labastie <pierre@…>, 8 years ago
Merge trunk r3940,41
Property mode set to `100644`
File size: 38.6 KB

Line
1	<?xml version="1.0" encoding="ISO-8859-1"?>
2
3	<!-- $Id$ -->
4
5	<xsl:stylesheet
6	xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
7	xmlns:exsl="http://exslt.org/common"
8	extension-element-prefixes="exsl"
9	version="1.0">
10
11	<!-- Parameters -->
12
13	<!-- which revision attribute to include: can only be sysv or systemd,
14	but we leave checking to the caller-->
15	<xsl:param name="revision" select="'sysv'"/>
16
17	<!-- use package management ?
18	n = no, original behavior
19	y = yes, add PKG_DEST to scripts in install commands of chapter06-08
20	-->
21	<xsl:param name="pkgmngt" select="'n'"/>
22
23	<!-- Package management with "porg style" ?
24	n = no, same as pkgmngt description above
25	y = yes, wrap install commands of chapter06-08 into a bash function.
26	note that pkgmngt must be 'y' in this case
27	-->
28	<xsl:param name="wrap-install" select='"n"'/>
29
30	<!-- Run test suites?
31	0 = none
32	1 = only chapter06 critical testsuites
33	2 = all chapter06 testsuites
34	3 = all chapter05 and chapter06 testsuites
35	-->
36	<xsl:param name="testsuite" select="1"/>
37
38	<!-- Bomb on test suites failures?
39	n = no, I want to build the full system and review the logs
40	y = yes, bomb at the first test suite failure to can review the build dir
41	-->
42	<xsl:param name="bomb-testsuite" select="'n'"/>
43
44	<!-- Install vim-lang package? OBSOLETE should always be 'n'-->
45	<xsl:param name="vim-lang" select="'n'"/>
46
47	<!-- Time zone -->
48	<xsl:param name="timezone" select="'GMT'"/>
49
50	<!-- Page size -->
51	<xsl:param name="page" select="'letter'"/>
52
53	<!-- Locale settings -->
54	<xsl:param name="lang" select="'C'"/>
55
56	<!-- Install the whole set of locales -->
57	<xsl:param name='full-locale' select='"n"'/>
58
59	<!-- Hostname -->
60	<xsl:param name='hostname' select='"HOSTNAME"'/>
61
62	<!-- Network parameters: interface, ip, gateway, prefix, broadcast, domain
63	and nameservers -->
64	<xsl:param name='interface' select="'eth0'"/>
65	<xsl:param name='ip' select='"10.0.2.9"'/>
66	<xsl:param name='gateway' select='"10.0.2.2"'/>
67	<xsl:param name='prefix' select='24'/>
68	<xsl:param name='broadcast' select='"10.0.2.255"'/>
69	<xsl:param name='domain' select='"lfs.org"'/>
70	<xsl:param name='nameserver1' select='"10.0.2.3"'/>
71	<xsl:param name='nameserver2' select='"8.8.8.8"'/>
72
73	<!-- End parameters -->
74
75	<xsl:template match="/">
76	<xsl:apply-templates select="//sect1[not(@revision) or
77	@revision=$revision]"/>
78	</xsl:template>
79
80	<xsl:template match="sect1">
81	<!-- Since this xsl:if tag encloses the whole template, it would
82	be much better to transpose this condition to the select part
83	of the "calling" apply-template. But that would change the numbering,
84	so that it would be difficult to compare to previous versions. So for
85	version 2.4, let us keep this -->
86	<xsl:if test="(../@id='chapter-temporary-tools' or
87	../@id='chapter-building-system' or
88	../@id='chapter-bootscripts' or
89	../@id='chapter-bootable') and
90	(sect2[not(@revision) or @revision=$revision]//..\|.)/
91	screen[(not(@role) or @role != 'nodump') and
92	(not(@revision) or @revision=$revision)]/
93	userinput[not(starts-with(string(),'chroot'))]">
94	<!-- The last condition is a hack to allow previous versions of the
95	book where the chroot commands did not have role="nodump".
96	It only works if the chroot command is the only one on the page -->
97	<!-- The dirs names -->
98	<xsl:variable name="pi-dir" select="../processing-instruction('dbhtml')"/>
99	<xsl:variable name="pi-dir-value" select="substring-after($pi-dir,'dir=')"/>
100	<xsl:variable name="quote-dir" select="substring($pi-dir-value,1,1)"/>
101	<xsl:variable name="dirname" select="substring-before(substring($pi-dir-value,2),$quote-dir)"/>
102	<!-- The file names -->
103	<xsl:variable name="pi-file" select="processing-instruction('dbhtml')"/>
104	<xsl:variable name="pi-file-value" select="substring-after($pi-file,'filename=')"/>
105	<xsl:variable name="filename" select="substring-before(substring($pi-file-value,2),'.html')"/>
106	<!-- The build order -->
107	<xsl:variable name="position" select="position()"/>
108	<xsl:variable name="order">
109	<xsl:choose>
110	<xsl:when test="string-length($position) = 1">
111	<xsl:text>00</xsl:text>
112	<xsl:value-of select="$position"/>
113	</xsl:when>
114	<xsl:when test="string-length($position) = 2">
115	<xsl:text>0</xsl:text>
116	<xsl:value-of select="$position"/>
117	</xsl:when>
118	<xsl:otherwise>
119	<xsl:value-of select="$position"/>
120	</xsl:otherwise>
121	</xsl:choose>
122	</xsl:variable>
123	<!-- Inclusion of package manager scriptlets -->
124	<xsl:if test="@id='ch-tools-stripping' and $pkgmngt='y'">
125	<xsl:apply-templates
126	select="document('packageManager.xml')//sect1[contains(@id,'ch-tools')]"
127	mode="pkgmngt">
128	<xsl:with-param name="order" select="$order"/>
129	<xsl:with-param name="dirname" select="$dirname"/>
130	</xsl:apply-templates>
131	</xsl:if>
132	<xsl:if test="@id='ch-system-strippingagain' and $pkgmngt='y'">
133	<xsl:apply-templates
134	select="document('packageManager.xml')//sect1[contains(@id,'ch-system')]"
135	mode="pkgmngt">
136	<xsl:with-param name="order" select="$order"/>
137	<xsl:with-param name="dirname" select="$dirname"/>
138	</xsl:apply-templates>
139	</xsl:if>
140	<!-- Creating dirs and files -->
141	<exsl:document href="{$dirname}/{$order}-{$filename}" method="text">
142	<xsl:choose>
143	<xsl:when test="@id='ch-system-creatingdirs' or
144	@id='ch-system-createfiles' or
145	@id='ch-system-strippingagain'">
146	<xsl:text>#!/tools/bin/bash set +h </xsl:text>
147	</xsl:when>
148	<xsl:otherwise>
149	<xsl:text>#!/bin/bash set +h </xsl:text>
150	</xsl:otherwise>
151	</xsl:choose>
152	<xsl:if test="not(@id='ch-tools-stripping') and
153	not(@id='ch-system-strippingagain')">
154	<xsl:text>set -e </xsl:text>
155	</xsl:if>
156	<xsl:text> </xsl:text>
157	<xsl:if test="sect2[@role='installation']">
158	<xsl:text>cd $PKGDIR </xsl:text>
159	</xsl:if>
160	<xsl:apply-templates select="sect2[not(@revision) or
161	@revision=$revision] \|
162	screen[(not(@role) or
163	@role!='nodump') and
164	(not(@revision) or
165	@revision=$revision)]/userinput"/>
166	<xsl:if test="@id='ch-system-creatingdirs' and $pkgmngt='y'">
167	<xsl:apply-templates
168	select="document('packageManager.xml')//sect1[
169	@id='ch-pkgmngt-creatingdirs'
170	]//userinput"
171	mode="pkgmngt"/>
172	</xsl:if>
173	<xsl:if test="@id='ch-system-createfiles' and $pkgmngt='y'">
174	<xsl:apply-templates
175	select="document('packageManager.xml')//sect1[
176	@id='ch-pkgmngt-createfiles'
177	]//userinput"
178	mode="pkgmngt"/>
179	</xsl:if>
180	<xsl:text>echo -e "\n\nTotalseconds: $SECONDS\n" </xsl:text>
181	<xsl:text>exit </xsl:text>
182	</exsl:document>
183	</xsl:if>
184	</xsl:template>
185
186	<xsl:template match="sect2">
187	<xsl:apply-templates
188	select=".//screen[(not(@role) or
189	@role != 'nodump') and
190	(not(@revision) or
191	@revision=$revision)]/userinput[
192	@remap = 'pre' or
193	@remap = 'configure' or
194	@remap = 'make' or
195	@remap = 'test' and
196	not(current()/../@id='ch-tools-dejagnu') and
197	not(current()/../@id='ch-system-systemd')]"/>
198	<xsl:if
199	test="ancestor::chapter[@id != 'chapter-temporary-tools'] and
200	$pkgmngt = 'y' and
201	descendant::screen[not(@role) or
202	@role != 'nodump']/userinput[
203	@remap='install']">
204	<xsl:choose>
205	<xsl:when test="$wrap-install='y'">
206	<xsl:text>wrapInstall '
207	</xsl:text>
208	</xsl:when>
209	<xsl:otherwise>
210	<xsl:text>mkdir -pv $PKG_DEST/{boot,etc,lib,bin,sbin}
211	mkdir -pv $PKG_DEST/usr/{lib,bin,sbin,include}
212	mkdir -pv $PKG_DEST/usr/share/{doc,info,man}
213	mkdir -pv $PKG_DEST/usr/share/man/man{1..8}
214	ln -sv share/{man,doc,info} $PKG_DEST/usr
215	case $(uname -m) in
216	x86_64) ln -sv lib $PKG_DEST/lib64 && ln -sv lib $PKG_DEST/usr/lib64 ;;
217	esac
218	</xsl:text>
219	</xsl:otherwise>
220	</xsl:choose>
221	</xsl:if>
222	<xsl:if test="../@id = 'ch-system-glibc' and
223	@role='installation' and
224	$pkgmngt = 'y' and
225	$wrap-install = 'n'">
226	<xsl:text>mkdir -pv $PKG_DEST/usr/include/{rpc,rpcsvc}
227	</xsl:text>
228	</xsl:if>
229	<xsl:apply-templates
230	select=".//screen[(not(@role) or
231	@role != 'nodump') and
232	(not(@revision) or
233	@revision=$revision)]/userinput[@remap = 'install']"/>
234	<xsl:if test="ancestor::chapter[@id != 'chapter-temporary-tools'] and
235	$pkgmngt = 'y' and
236	descendant::screen[not(@role) or
237	@role != 'nodump']/userinput[
238	@remap='install']">
239	<xsl:choose>
240	<xsl:when test="$wrap-install='y'">
241	<xsl:if test="../@id = 'ch-system-man-pages'">
242	<!-- these files are provided by the shadow package -->
243	<xsl:text>rm -fv /usr/share/man/{man3/getspnam.3,man5/passwd.5}
244	</xsl:text>
245	</xsl:if>
246	<!-- Attr man/man2 pages are already installed by man-pages. As of
247	March 2013, they are the same pages.
248	November 2015: now they are more accurate
249	in man-pages, and the man5 section is also in man-pages... -->
250	<xsl:if test="../@id = 'ch-system-attr'">
251	<xsl:text>rm -fv /usr/share/man/man2/*
252	rm -fv /usr/share/man/man5/*
253	</xsl:text>
254	</xsl:if>
255	<!-- nologin is installed by util-linux. remove it from shadow -->
256	<xsl:if test="../@id = 'ch-system-shadow'">
257	<xsl:text>rm -fv /usr/share/man/man8/nologin.8
258	rm -fv /sbin/nologin
259	</xsl:text>
260	</xsl:if>
261	<xsl:text>'
262	packInstall
263	</xsl:text>
264	</xsl:when>
265	<xsl:otherwise>
266	<xsl:if test="../@id = 'ch-system-man-pages'">
267	<!-- these files are provided by the shadow package -->
268	<xsl:text>rm -fv $PKG_DEST/usr/share/man/{man3/getspnam.3,man5/passwd.5}
269	</xsl:text>
270	</xsl:if>
271	<!-- Attr man/man2 pages are already installed by man-pages. As of
272	March 2013, they are the same pages.
273	November 2015: now they are more accurate
274	in man-pages, and the man5 section is also in man-pages... -->
275	<xsl:if test="../@id = 'ch-system-attr'">
276	<xsl:text>rm -fv $PKG_DEST/usr/share/man/man2/*
277	rm -fv $PKG_DEST/usr/share/man/man5/*
278	</xsl:text>
279	</xsl:if>
280	<!-- nologin is installed by util-linux. remove it from shadow -->
281	<xsl:if test="../@id = 'ch-system-shadow'">
282	<xsl:text>rm -fv $PKG_DEST/usr/share/man/man8/nologin.8
283	rm -fv $PKG_DEST/sbin/nologin
284	</xsl:text>
285	</xsl:if>
286	<xsl:text>rm -fv $PKG_DEST/{,usr/}lib64
287	rm -fv $PKG_DEST/usr/{man,doc,info}
288	for dir in $PKG_DEST/usr/share/man/man{1..8}; do
289	[[ -z $(ls $dir) ]] && rmdir -v $dir
290	done
291	for dir in $PKG_DEST/usr/share/{doc,info,man}; do
292	[[ -z $(ls $dir) ]] && rmdir -v $dir
293	done
294	for dir in $PKG_DEST/usr/{lib,bin,sbin,include}; do
295	[[ -z $(ls $dir) ]] && rmdir -v $dir
296	done
297	for dir in $PKG_DEST/{boot,etc,lib,bin,sbin}; do
298	[[ -z $(ls $dir) ]] && rmdir -v $dir
299	done
300	packInstall
301	rm -rf $PKG_DEST
302	</xsl:text>
303	</xsl:otherwise>
304	</xsl:choose>
305	</xsl:if>
306	<xsl:if test="$testsuite='3' and
307	../@id='ch-tools-glibc' and
308	@role='installation'">
309	<xsl:copy-of select="//userinput[@remap='locale-test']"/>
310	<xsl:text> </xsl:text>
311	</xsl:if>
312	<xsl:if test="../@id='ch-system-glibc' and @role='installation'">
313	<xsl:choose>
314	<xsl:when test="$full-locale='y'">
315	<xsl:copy-of select="//userinput[@remap='locale-full']"/>
316	<xsl:text> </xsl:text>
317	</xsl:when>
318	<xsl:otherwise>
319	<xsl:copy-of select="//userinput[@remap='locale-test']"/>
320	<xsl:text> </xsl:text>
321	<xsl:if test="not(contains(string(//userinput[@remap='locale-test']),$lang)) and $lang!='C' and $lang!='POSIX'">
322	<xsl:text>if LOCALE=`grep "</xsl:text>
323	<xsl:value-of select="$lang"/>
324	<xsl:text>/" $PKGDIR/localedata/SUPPORTED`; then
325	CHARMAP=`echo $LOCALE \| sed 's,[^/]/\([^ ]\) [\],\1,'`
326	INPUT=`echo $LOCALE \| sed 's,[/.].*,,'`
327	LOCALE=`echo $LOCALE \| sed 's,/.*,,'`
328	localedef -i $INPUT -f $CHARMAP $LOCALE
329	fi
330	</xsl:text>
331	</xsl:if>
332	</xsl:otherwise>
333	</xsl:choose>
334	</xsl:if>
335	<xsl:apply-templates
336	select=".//screen[
337	(not(@role) or
338	@role != 'nodump') and
339	(not(@revision) or
340	@revision=$revision)
341	]/userinput[
342	not(@remap) or
343	@remap='adjust' or
344	@remap='test' and current()/../@id='ch-tools-dejagnu' or
345	@remap='test' and current()/../@id='ch-system-systemd'
346	]"/>
347	</xsl:template>
348
349	<xsl:template match="sect1" mode="pkgmngt">
350	<xsl:param name="dirname" select="chapter05"/>
351	<!-- The build order -->
352	<xsl:param name="order" select="062"/>
353	<!-- The file names -->
354	<xsl:variable name="pi-file" select="processing-instruction('dbhtml')"/>
355	<xsl:variable name="pi-file-value" select="substring-after($pi-file,'filename=')"/>
356	<xsl:variable name="filename" select="substring-before(substring($pi-file-value,2),'.html')"/>
357	<!-- Creating dirs and files -->
358	<xsl:if test="count(descendant::screen/userinput) > 0 and
359	count(descendant::screen/userinput) >
360	count(descendant::screen[@role='nodump'])">
361	<exsl:document href="{$dirname}/{$order}-{position()}-{$filename}"
362	method="text">
363	<xsl:text>#!/bin/bash
364	set +h
365	set -e
366
367	cd $PKGDIR
368	</xsl:text>
369	<xsl:apply-templates
370	select=".//screen[not(@role) or
371	@role != 'nodump']/userinput[@remap != 'adjust']"
372	mode="pkgmngt"/>
373	<xsl:if test="$dirname = 'chapter06'">
374	<xsl:text>packInstall
375	rm -rf "$PKG_DEST"
376	</xsl:text>
377	</xsl:if>
378	<xsl:apply-templates
379	select=".//screen[not(@role) or
380	@role != 'nodump'
381	]/userinput[not(@remap) or
382	@remap='adjust'
383	]"
384	mode="pkgmngt"/>
385	<xsl:text>
386	echo -e "\n\nTotalseconds: $SECONDS\n"
387	exit
388	</xsl:text>
389	</exsl:document>
390	</xsl:if>
391	</xsl:template>
392
393	<xsl:template match="userinput" mode="pkgmngt">
394	<xsl:apply-templates/>
395	<xsl:text> </xsl:text>
396	</xsl:template>
397
398	<xsl:template match="userinput">
399	<xsl:choose>
400	<!-- Copying the kernel config file -->
401	<xsl:when test="string() = 'make mrproper'">
402	<xsl:text>make mrproper </xsl:text>
403	<xsl:if test="ancestor::sect1[@id='ch-bootable-kernel']">
404	<xsl:text>cp -v ../kernel-config .config </xsl:text>
405	</xsl:if>
406	</xsl:when>
407	<!-- test instructions -->
408	<xsl:when test="@remap = 'test'">
409	<xsl:choose>
410	<xsl:when test="$testsuite = '0'"/>
411	<xsl:when test="$testsuite = '1' and
412	not(ancestor::sect1[@id='ch-system-gcc']) and
413	not(ancestor::sect1[@id='ch-system-glibc']) and
414	not(ancestor::sect1[@id='ch-system-gmp']) and
415	not(ancestor::sect1[@id='ch-system-mpfr']) and
416	not(ancestor::sect1[@id='ch-system-binutils'])"/>
417	<xsl:when test="$testsuite = '2' and
418	ancestor::chapter[@id='chapter-temporary-tools']"/>
419	<xsl:otherwise>
420	<xsl:choose>
421	<xsl:when test="$bomb-testsuite = 'n'">
422	<xsl:choose>
423	<!-- special case for glibc -->
424	<xsl:when test="contains(string(), 'glibc-check-log')">
425	<xsl:value-of
426	select="substring-before(string(),'2>&1')"/>
427	<xsl:text>>> $TEST_LOG 2>&1 \|\| true </xsl:text>
428	</xsl:when>
429	<!-- special case for procps-ng -->
430	<xsl:when test="contains(string(), 'pushd')">
431	<xsl:text>{ </xsl:text>
432	<xsl:apply-templates/>
433	<xsl:text>; } >> $TEST_LOG 2>&1 \|\| true </xsl:text>
434	</xsl:when>
435	<xsl:when test="contains(string(), 'make -k')">
436	<xsl:apply-templates/>
437	<xsl:text> >> $TEST_LOG 2>&1 \|\| true </xsl:text>
438	</xsl:when>
439	<xsl:when test="contains(string(), 'make')">
440	<xsl:value-of select="substring-before(string(),'make')"/>
441	<xsl:text>make -k</xsl:text>
442	<xsl:value-of select="substring-after(string(),'make')"/>
443	<xsl:text> >> $TEST_LOG 2>&1 \|\| true </xsl:text>
444	</xsl:when>
445	<xsl:otherwise>
446	<xsl:apply-templates/>
447	<xsl:if test="not(contains(string(), '>>'))">
448	<xsl:text> >> $TEST_LOG 2>&1</xsl:text>
449	</xsl:if>
450	<xsl:text> </xsl:text>
451	</xsl:otherwise>
452	</xsl:choose>
453	</xsl:when>
454	<xsl:otherwise>
455	<!-- bomb-testsuite != 'n'-->
456	<xsl:choose>
457	<!-- special case for glibc -->
458	<xsl:when test="contains(string(), 'glibc-check-log')">
459	<xsl:value-of
460	select="substring-before(string(),'2>&1')"/>
461	<xsl:text>>> $TEST_LOG 2>&1 \|\| true </xsl:text>
462	</xsl:when>
463	<!-- special case for gmp -->
464	<xsl:when test="contains(string(), 'tee gmp-check-log')">
465	<xsl:text>(</xsl:text>
466	<xsl:apply-templates/>
467	<xsl:text>>> $TEST_LOG 2>&1 && exit $PIPESTATUS) </xsl:text>
468	</xsl:when>
469	<!-- special case for procps-ng -->
470	<xsl:when test="contains(string(), 'pushd')">
471	<xsl:text>{ </xsl:text>
472	<xsl:apply-templates/>
473	<xsl:text>; } >> $TEST_LOG 2>&1 </xsl:text>
474	</xsl:when>
475	<xsl:when test="contains(string(), 'make -k')">
476	<xsl:apply-templates/>
477	<xsl:text> >> $TEST_LOG 2>&1 \|\| true </xsl:text>
478	</xsl:when>
479	<xsl:otherwise>
480	<xsl:apply-templates/>
481	<xsl:if test="not(contains(string(), '>>'))">
482	<xsl:text> >> $TEST_LOG 2>&1</xsl:text>
483	</xsl:if>
484	<xsl:text> </xsl:text>
485	</xsl:otherwise>
486	</xsl:choose>
487	</xsl:otherwise>
488	</xsl:choose>
489	</xsl:otherwise>
490	</xsl:choose>
491	</xsl:when>
492	<!-- End of test instructions -->
493	<!-- Don't stop on strip run -->
494	<xsl:when test="contains(string(),'strip ')">
495	<xsl:apply-templates/>
496	<xsl:text> \|\| true </xsl:text>
497	</xsl:when>
498	<!-- Package management -->
499	<!-- Add $PKG_DEST to installation commands -->
500	<xsl:when test="@remap='install' and
501	not(ancestor::chapter[
502	@id='chapter-temporary-tools'
503	])">
504	<xsl:choose>
505	<xsl:when test="$pkgmngt='n'">
506	<xsl:choose>
507	<xsl:when test="contains(string(),'firmware,udev')">
508	<xsl:text>if [[ ! -d /lib/udev/devices ]] ; then </xsl:text>
509	<xsl:apply-templates/>
510	<xsl:text> fi </xsl:text>
511	</xsl:when>
512	<xsl:otherwise>
513	<xsl:apply-templates/>
514	<xsl:text> </xsl:text>
515	</xsl:otherwise>
516	</xsl:choose>
517	</xsl:when>
518	<xsl:when test="$wrap-install='y'">
519	<xsl:choose>
520	<xsl:when test="./literal">
521	<xsl:call-template name="output-wrap">
522	<xsl:with-param name="commands" select="text()[1]"/>
523	</xsl:call-template>
524	<xsl:apply-templates select="literal"/>
525	<xsl:call-template name="output-wrap">
526	<xsl:with-param name="commands" select="text()[2]"/>
527	</xsl:call-template>
528	</xsl:when>
529	<xsl:otherwise>
530	<xsl:call-template name="output-wrap">
531	<xsl:with-param name="commands" select="string()"/>
532	</xsl:call-template>
533	</xsl:otherwise>
534	</xsl:choose>
535	<xsl:text> </xsl:text>
536	</xsl:when>
537	<xsl:otherwise><!--pkgmngt = 'y' and wrap-install='n'-->
538	<xsl:choose>
539	<xsl:when test="./literal">
540	<xsl:call-template name="outputpkgdest">
541	<xsl:with-param name="outputstring" select="text()[1]"/>
542	</xsl:call-template>
543	<xsl:apply-templates select="literal"/>
544	<xsl:call-template name="outputpkgdest">
545	<xsl:with-param name="outputstring" select="text()[2]"/>
546	</xsl:call-template>
547	</xsl:when>
548	<xsl:otherwise>
549	<xsl:call-template name="outputpkgdest">
550	<xsl:with-param name="outputstring" select="string()"/>
551	</xsl:call-template>
552	</xsl:otherwise>
553	</xsl:choose>
554	</xsl:otherwise>
555	</xsl:choose>
556	</xsl:when>
557	<!-- if package management, we should make an independant package for
558	tzdata. -->
559	<xsl:when test="contains(string(),'tzdata') and $pkgmngt='y'">
560	<xsl:text>
561	OLD_PKG_DEST="$PKG_DEST"
562	OLD_PKGDIR=$PKGDIR
563	PKG_DEST=$(dirname $OLD_PKG_DEST)/001-tzdata
564	PKGDIR=$(dirname $PKGDIR)/tzdata-</xsl:text>
565	<xsl:copy-of select="substring-before(
566	substring-after(string(),'tzdata'),
567	'.tar')"/>
568	<xsl:text>
569	</xsl:text>
570	<xsl:choose>
571	<xsl:when test="$wrap-install='n'">
572	<xsl:copy-of select="substring-before(string(),'ZONEINFO=')"/>
573	<xsl:text>ZONEINFO=$PKG_DEST</xsl:text>
574	<xsl:copy-of select="substring-after(string(),'ZONEINFO=')"/>
575	<xsl:text>
576	packInstall
577	rm -rf $PKG_DEST
578	</xsl:text>
579	</xsl:when>
580	<xsl:otherwise><!-- wrap-install='y' -->
581	<xsl:copy-of select="substring-before(string(),'ZONEINFO=')"/>
582	<xsl:text>
583	wrapInstall '
584	ZONEINFO=</xsl:text>
585	<xsl:copy-of select="substring-after(string(),'ZONEINFO=')"/>
586	<xsl:text>'
587	packInstall
588	</xsl:text>
589	</xsl:otherwise>
590	</xsl:choose>
591	<xsl:text>
592	PKG_DEST=$OLD_PKG_DEST
593	unset OLD_PKG_DEST
594	PKGDIR=$OLD_PKGDIR
595	unset OLD_PKGDIR
596	</xsl:text>
597	</xsl:when><!-- addition for tzdata + package management -->
598	<!-- End addition for package management -->
599	<!-- The rest of commands -->
600	<xsl:otherwise>
601	<xsl:apply-templates/>
602	<xsl:text> </xsl:text>
603	</xsl:otherwise>
604	</xsl:choose>
605	</xsl:template>
606
607	<xsl:template match="replaceable">
608	<xsl:choose>
609	<xsl:when test="ancestor::sect1[@id='ch-system-glibc']">
610	<xsl:value-of select="$timezone"/>
611	</xsl:when>
612	<xsl:when test="ancestor::sect1[@id='ch-system-groff']">
613	<xsl:value-of select="$page"/>
614	</xsl:when>
615	<xsl:when test="contains(string(.),'<ll>_<CC>')">
616	<xsl:value-of select="$lang"/>
617	</xsl:when>
618	<xsl:when test="contains(string(.),'Domain')">
619	<xsl:value-of select="$domain"/>
620	</xsl:when>
621	<xsl:when test="contains(string(.),'primary')">
622	<xsl:value-of select="$nameserver1"/>
623	</xsl:when>
624	<xsl:when test="contains(string(.),'secondary')">
625	<xsl:value-of select="$nameserver2"/>
626	</xsl:when>
627	<xsl:when test="contains(string(.),'192.168.1.1')">
628	<xsl:value-of select="$ip"/>
629	</xsl:when>
630	<xsl:when test="contains(string(.),'192.168.0.2')">
631	<xsl:value-of select="$ip"/>
632	</xsl:when>
633	<!-- Only adapted to LFS-20170310 and later -->
634	<xsl:when test="contains(string(.),'HOSTNAME')">
635	<xsl:value-of select="$hostname"/>
636	</xsl:when>
637	<xsl:when test="contains(string(.),'FQDN')">
638	<xsl:value-of select="$hostname"/>
639	<xsl:text>.</xsl:text>
640	<xsl:value-of select="$domain"/>
641	</xsl:when>
642	<xsl:when test="contains(string(.),'alias')"/>
643	<xsl:when test="contains(string(.),'<lfs>')">
644	<xsl:value-of select="$hostname"/>
645	</xsl:when>
646	<xsl:otherwise>
647	<xsl:text>**EDITME</xsl:text>
648	<xsl:apply-templates/>
649	<xsl:text>EDITME**</xsl:text>
650	</xsl:otherwise>
651	</xsl:choose>
652	</xsl:template>
653
654	<xsl:template match="literal">
655	<xsl:choose>
656	<xsl:when test="contains(string(),'ONBOOT')">
657	<xsl:call-template name="outputnet">
658	<xsl:with-param name="netstring" select="string()"/>
659	</xsl:call-template>
660	</xsl:when>
661	<xsl:when test="contains(string(),'[Match]')">
662	<xsl:call-template name="outputsysdnet">
663	<xsl:with-param name="netstring" select="string()"/>
664	</xsl:call-template>
665	</xsl:when>
666	<xsl:otherwise>
667	<xsl:apply-templates/>
668	</xsl:otherwise>
669	</xsl:choose>
670	</xsl:template>
671
672	<xsl:template name="outputnet">
673	<xsl:param name="netstring" select="''"/>
674	<!-- We suppose that book example has the following values:
675	- interface: eth0
676	- ip: 192.168.1.2
677	- gateway: 192.168.1.1
678	- prefix: 24
679	- broadcast: 192.168.1.255
680	Change below if book changes -->
681	<xsl:choose>
682	<xsl:when test="contains($netstring,'eth0')">
683	<xsl:call-template name="outputnet">
684	<xsl:with-param name="netstring"
685	select="substring-before($netstring,'eth0')"/>
686	</xsl:call-template>
687	<xsl:value-of select="$interface"/>
688	<xsl:call-template name="outputnet">
689	<xsl:with-param name="netstring"
690	select="substring-after($netstring,'eth0')"/>
691	</xsl:call-template>
692	</xsl:when>
693	<xsl:when test="contains($netstring,'192.168.1.1')">
694	<xsl:call-template name="outputnet">
695	<xsl:with-param name="netstring"
696	select="substring-before($netstring,'192.168.1.1')"/>
697	</xsl:call-template>
698	<xsl:value-of select="$gateway"/>
699	<xsl:call-template name="outputnet">
700	<xsl:with-param name="netstring"
701	select="substring-after($netstring,'192.168.1.1')"/>
702	</xsl:call-template>
703	</xsl:when>
704	<!-- must test this before the following, because 192.168.1.255 contains
705	192.168.1.2! -->
706	<xsl:when test="contains($netstring,'192.168.1.255')">
707	<xsl:call-template name="outputnet">
708	<xsl:with-param name="netstring"
709	select="substring-before($netstring,'192.168.1.255')"/>
710	</xsl:call-template>
711	<xsl:value-of select="$broadcast"/>
712	<xsl:call-template name="outputnet">
713	<xsl:with-param name="netstring"
714	select="substring-after($netstring,'192.168.1.255')"/>
715	</xsl:call-template>
716	</xsl:when>
717	<xsl:when test="contains($netstring,'192.168.1.2')">
718	<xsl:call-template name="outputnet">
719	<xsl:with-param name="netstring"
720	select="substring-before($netstring,'192.168.1.2')"/>
721	</xsl:call-template>
722	<xsl:value-of select="$ip"/>
723	<xsl:call-template name="outputnet">
724	<xsl:with-param name="netstring"
725	select="substring-after($netstring,'192.168.1.2')"/>
726	</xsl:call-template>
727	</xsl:when>
728	<xsl:when test="contains($netstring,'24')">
729	<xsl:call-template name="outputnet">
730	<xsl:with-param name="netstring"
731	select="substring-before($netstring,'24')"/>
732	</xsl:call-template>
733	<xsl:value-of select="$prefix"/>
734	<xsl:call-template name="outputnet">
735	<xsl:with-param name="netstring"
736	select="substring-after($netstring,'24')"/>
737	</xsl:call-template>
738	</xsl:when>
739	<xsl:otherwise>
740	<xsl:value-of select="$netstring"/>
741	</xsl:otherwise>
742	</xsl:choose>
743	</xsl:template>
744
745	<xsl:template name="outputsysdnet">
746	<xsl:param name="netstring" select="''"/>
747	<!-- We suppose that book example has the following values:
748	- interface: eth0
749	- ip: 192.168.0.2
750	- gateway: 192.168.0.1
751	- prefix: 24
752	- DNS: 192.168.0.1
753	- Domain: <Your Domain Name>
754	and gateway comes before DNS. Change below if book changes -->
755	<xsl:choose>
756	<xsl:when test="contains($netstring,'eth0')">
757	<xsl:call-template name="outputsysdnet">
758	<xsl:with-param name="netstring"
759	select="substring-before($netstring,'eth0')"/>
760	</xsl:call-template>
761	<xsl:value-of select="$interface"/>
762	<xsl:call-template name="outputsysdnet">
763	<xsl:with-param name="netstring"
764	select="substring-after($netstring,'eth0')"/>
765	</xsl:call-template>
766	</xsl:when>
767	<xsl:when test="contains($netstring,'192.168.0.1') and
768	contains($netstring,'Gateway')">
769	<xsl:call-template name="outputsysdnet">
770	<xsl:with-param name="netstring"
771	select="substring-before($netstring,'192.168.0.1')"/>
772	</xsl:call-template>
773	<xsl:value-of select="$gateway"/>
774	<xsl:call-template name="outputsysdnet">
775	<xsl:with-param name="netstring"
776	select="substring-after($netstring,'192.168.0.1')"/>
777	</xsl:call-template>
778	</xsl:when>
779	<xsl:when test="contains($netstring,'192.168.0.1') and
780	not(contains($netstring,'Gateway'))">
781	<xsl:call-template name="outputsysdnet">
782	<xsl:with-param name="netstring"
783	select="substring-before($netstring,'192.168.0.1')"/>
784	</xsl:call-template>
785	<xsl:value-of select="$nameserver1"/>
786	<xsl:text>
787	DNS=</xsl:text>
788	<xsl:value-of select="$nameserver2"/>
789	<xsl:call-template name="outputsysdnet">
790	<xsl:with-param name="netstring"
791	select="substring-after($netstring,'192.168.0.1')"/>
792	</xsl:call-template>
793	</xsl:when>
794	<xsl:when test="contains($netstring,'192.168.0.2')">
795	<xsl:call-template name="outputsysdnet">
796	<xsl:with-param name="netstring"
797	select="substring-before($netstring,'192.168.0.2')"/>
798	</xsl:call-template>
799	<xsl:value-of select="$ip"/>
800	<xsl:call-template name="outputsysdnet">
801	<xsl:with-param name="netstring"
802	select="substring-after($netstring,'192.168.0.2')"/>
803	</xsl:call-template>
804	</xsl:when>
805	<xsl:when test="contains($netstring,'24')">
806	<xsl:call-template name="outputsysdnet">
807	<xsl:with-param name="netstring"
808	select="substring-before($netstring,'24')"/>
809	</xsl:call-template>
810	<xsl:value-of select="$prefix"/>
811	<xsl:call-template name="outputsysdnet">
812	<xsl:with-param name="netstring"
813	select="substring-after($netstring,'24')"/>
814	</xsl:call-template>
815	</xsl:when>
816	<xsl:when test="contains($netstring,'<Your Domain Name>')">
817	<xsl:call-template name="outputsysdnet">
818	<xsl:with-param name="netstring"
819	select="substring-before($netstring,'<Your Domain Name>')"/>
820	</xsl:call-template>
821	<xsl:value-of select="$domain"/>
822	<xsl:call-template name="outputsysdnet">
823	<xsl:with-param name="netstring"
824	select="substring-after($netstring,'<Your Domain Name>')"/>
825	</xsl:call-template>
826	</xsl:when>
827	<xsl:otherwise>
828	<xsl:value-of select="$netstring"/>
829	</xsl:otherwise>
830	</xsl:choose>
831	</xsl:template>
832
833	<xsl:template name="outputpkgdest">
834	<xsl:param name="outputstring" select="foo"/>
835	<xsl:choose>
836	<xsl:when test="contains($outputstring,'make ')">
837	<xsl:choose>
838	<xsl:when test="not(starts-with($outputstring,'make'))">
839	<xsl:call-template name="outputpkgdest">
840	<xsl:with-param name="outputstring"
841	select="substring-before($outputstring,'make')"/>
842	</xsl:call-template>
843	<xsl:call-template name="outputpkgdest">
844	<xsl:with-param
845	name="outputstring"
846	select="substring-after($outputstring,
847	substring-before($outputstring,'make'))"/>
848	</xsl:call-template>
849	</xsl:when>
850	<xsl:otherwise>
851	<xsl:choose>
852	<!-- special cases (no DESTDIR) here -->
853	<xsl:when test="ancestor::sect1[@id='ch-system-glibc']">
854	<xsl:text>make install_root=$PKG_DEST -j1</xsl:text>
855	<xsl:value-of
856	select="substring-before(substring-after(string(),'make'),
857	'install')"/>
858	<xsl:text>install </xsl:text>
859	</xsl:when>
860	<xsl:when test="ancestor::sect1[@id='ch-system-bzip2']">
861	<xsl:text>make PREFIX=$PKG_DEST/usr install </xsl:text>
862	</xsl:when>
863	<xsl:when test="ancestor::sect1[@id='ch-system-sysklogd']">
864	<xsl:text>make BINDIR=$PKG_DEST/sbin prefix=$PKG_DEST install </xsl:text>
865	</xsl:when>
866	<xsl:when test="ancestor::sect1[@id='ch-system-iproute2']">
867	<xsl:text>make DESTDIR=$PKG_DEST DOCDIR=</xsl:text>
868	<xsl:value-of
869	select="substring-before(substring-after(string(),'DOCDIR='),
870	'install')"/>
871	<xsl:text>install </xsl:text>
872	</xsl:when>
873	<xsl:when test="ancestor::sect1[@id='ch-system-sysvinit']">
874	<xsl:text>make ROOT=$PKG_DEST</xsl:text>
875	<xsl:value-of
876	select="substring-before(substring-after(string(),'make'),
877	'install')"/>
878	<xsl:text>install </xsl:text>
879	</xsl:when>
880	<xsl:when test="ancestor::sect1[@id='ch-bootable-kernel']">
881	<xsl:text>make INSTALL_MOD_PATH=$PKG_DEST</xsl:text>
882	<xsl:value-of
883	select="substring-before(substring-after(string(),'make'),
884	'install')"/>
885	<xsl:text>install </xsl:text>
886	</xsl:when>
887	<xsl:when test="ancestor::sect1[@id='ch-system-attr']">
888	<xsl:text>DIST_ROOT=$PKG_DEST make</xsl:text>
889	<xsl:call-template name="outputpkgdest">
890	<xsl:with-param name="outputstring"
891	select="substring-after($outputstring,'make')"/>
892	</xsl:call-template>
893	</xsl:when>
894	<xsl:otherwise>
895	<xsl:text>make DESTDIR=$PKG_DEST</xsl:text>
896	<xsl:call-template name="outputpkgdest">
897	<xsl:with-param
898	name="outputstring"
899	select="substring-after($outputstring,'make')"/>
900	</xsl:call-template>
901	</xsl:otherwise>
902	</xsl:choose>
903	</xsl:otherwise>
904	</xsl:choose>
905	</xsl:when>
906	<xsl:otherwise> <!-- no make in this string -->
907	<xsl:choose>
908	<xsl:when test="contains($outputstring,'>/') and
909	not(contains(substring-before($outputstring,'>/'),' /'))">
910	<xsl:value-of select="substring-before($outputstring,'>/')"/>
911	<xsl:text>>$PKG_DEST/</xsl:text>
912	<xsl:call-template name="outputpkgdest">
913	<xsl:with-param name="outputstring" select="substring-after($outputstring,'>/')"/>
914	</xsl:call-template>
915	</xsl:when>
916	<xsl:when test="contains($outputstring,' /')">
917	<xsl:value-of select="substring-before($outputstring,' /')"/>
918	<xsl:text> $PKG_DEST/</xsl:text>
919	<xsl:call-template name="outputpkgdest">
920	<xsl:with-param name="outputstring" select="substring-after($outputstring,' /')"/>
921	</xsl:call-template>
922	</xsl:when>
923	<xsl:otherwise>
924	<xsl:value-of select="$outputstring"/>
925	<xsl:text> </xsl:text>
926	</xsl:otherwise>
927	</xsl:choose>
928	</xsl:otherwise>
929	</xsl:choose>
930	</xsl:template>
931
932	<xsl:variable name="APOS">'</xsl:variable>
933	<xsl:template name="output-wrap">
934	<xsl:param name="commands" select="''"/>
935	<xsl:choose>
936	<xsl:when test="contains($commands,string($APOS))">
937	<xsl:call-template name="output-wrap">
938	<xsl:with-param name="commands"
939	select="substring-before($commands,string($APOS))"/>
940	</xsl:call-template>
941	<xsl:text>'\''</xsl:text>
942	<xsl:call-template name="output-wrap">
943	<xsl:with-param name="commands"
944	select="substring-after($commands,string($APOS))"/>
945	</xsl:call-template>
946	</xsl:when>
947	<xsl:otherwise>
948	<xsl:value-of select="$commands"/>
949	</xsl:otherwise>
950	</xsl:choose>
951	</xsl:template>
952
953	</xsl:stylesheet>

Note: See TracBrowser for help on using the repository browser.

Download in other formats: