source: README@ f2382aa

experimental
Last change on this file since f2382aa was 3b63c8c, checked in by Manuel Canales Esparcia <manuel@…>, 18 years ago

Updated experimental branch to current trunk code.

  • Property mode set to 100644
File size: 7.8 KB
RevLine 
[e58c70fd]1$Id$
2
31. INTRODUCTION::
4
[86e1d17]5 This collection of scripts, known as jhalfs-X, strives to create
[fcf5226]6 accurate makefiles from the Linux From Scratch book series XML files.
[3b63c8c]7 This software is an evolution of the original "jhalfs-0.2" code.
[e58c70fd]8
9 The usage of this script assumes you have read and are familiar with
[854cde2]10 the book(s) and, therefore, the configuration variables found in config
11 files will have meaning to you. There are a number of command line switches
[e58c70fd]12 which, if used, will override the config file settings.
13
14 NOTES::
[854cde2]15 *. The resulting Makefile takes considerable time to run to completion.
16 Lay in a supply of caffeine beverages.
[e58c70fd]17
[67e3bc3]18 *. It is recommended that you temporarily unpack your linux kernel,
[3a27393]19 run <make menuconfig>, configure the kernel as per the book and save
[854cde2]20 the resulting .config file. This suggestion also applies to the
[86e1d17]21 configuration of the uClibc package when building a HLFS system using
22 uClibc rather than glibc.
[e58c70fd]23
242. INSTALLATION::
[1a97861]25 No installation is required. System-wide installation is not allowed
[86e1d17]26 for now.
[e58c70fd]27
283. CONFIGURATION FILES::
[854cde2]29 Each book in the LFS series has its own set of configurable parameters
[8ca21dc]30 as well as the common parameters file.
[e58c70fd]31
324. RUNNING::
[854cde2]33 The script master.sh cannot be invoked directly but only via the
[b051b90]34 supplied symlinks. After editing the config file for the project you wish
[854cde2]35 to build, run the script.
[3b63c8c]36
37 IMPORTANT:
38 If you use the switch -M (automatically run the generated makefile) you
39 must be 'root' or you can run the scripts using 'sudo'
40 i.e. sudo ./lfs -G -M
41
42 If you want to run make manually you can only do so if you are 'root' or
43 via 'sudo'
44 i.e (from within the jhalfs directory) sudo make
45
[9f46f8b]46 The term <symlink> refers to the 1 of 3 package symlinks, lfs,hlfs,clfs.
[854cde2]47 Replace <symlink> with your choice of packages; i.e.: ./lfs
[fcf5226]48
[d20c553]49 ./<symlink> eg: ./lfs or ./hlfs
[67e3bc3]50 Create a makefile based on the settings found in the config files.
[854cde2]51 You must enter the build partition/jhalfs directory and manually run <make>
[fcf5226]52
[d20c553]53 ./<symlink> -G eg: ./lfs -G
[fcf5226]54 Download the packages and patches necessary to build <symlink>
[67e3bc3]55
[d20c553]56 ./<symlink> -G -M eg: ./lfs -G -M
[fcf5226]57 Download the packages, create and automatically run the Makefile
[67e3bc3]58
[d20c553]59 ./<symlink> --help eg: ./lfs --help
60 will give you a context sensitive list of command line switches.
[e58c70fd]61
[3b63c8c]62 >>>> an expanded example
63
64 export SRC_ARCHIVE=/mnt/SourceFiles
65
66 ./lfs -D /mnt/partition4 \
67 -K ~/jhalfs_configs/linux-2.6.16.19-LFS.config \
68 -F ~/jhalfs-configs/fstab-sda3 \
69 -G -T 0 -M
70
71 explanation:::
72
73 export SRC_ARCHIVE=/mnt/SourceFiles
74 # This points to a local archive of existing packages. If the version in
75 the archive is incorrect jhalfs will access the net and download the
76 necessary version and store it here for later use. DO NOT set this to
77 $BUILDDIR/sources. If you do not set this variable to a valid directory
78 ALL package tarballs will be downloaded from the 'net.
79
80 -D /mnt/partition4
81 # where everything takes place. ..NOTE it must already exist and be mounted
82
83 -K ~/jhalfs_configs/linux-2.6.16.19-LFS.config
84 # If you want to automatically build a the kernel you MUST supply a valid
85 kernel configuration file. The file you supply will be copied and renamed.
86
87 -F ~/jhalfs-configs/fstab-sda3
88 # If you have a fstab file you wish to use it will be copied and renamed
89
90 -G # Retrieve the package files. You MUST enable this flag at least once if you
91 wish to do a build or whenever you update the book.
92
93 -T 0 # don't run any testsuites
94
95 -M # automatically run make against Makefile once jhalfs finishes its work.
96
97
[e58c70fd]985. LAYOUT::
99
[d20c553]100 /CLFS/config
101 /master.sh
102 /xxxx.xsl
[9f46f8b]103
[3b63c8c]104 /CLFS2/config
105 /master.sh
106 /xxxx.xsl
107
[d20c553]108 /HLFS/config
109 /master.sh
110 /xxxx.xsl
111
112 /LFS/config
113 / master.sh
114 /xxxx.xsl
115
116 /common/config
117 /common_functions
118 /makefile_functions
119 /func_check_versions.sh
120 /func_validate_configs.sh
121
122 /contrib/jhalfs-paco.patch
123
124 /extras/do_copy_files
125 /do_ica_prep
126 /do_ica_work
127 /farce
128 /filelist
129
130 README
131 README.PACO
132 TODO
[9f46f8b]133
[d20c553]134 ./clfs ---|
[3b63c8c]135 ./clfs2 ---|
[9f46f8b]136 ./hlfs ---|+---> master.sh
137 ./lfs ---|
138
139
[e58c70fd]1406. FAQ::
[3b63c8c]141 Q. "This 'help' file is very sparse"
142 A. Yes, it is. This tool, jhalfs, is for those who understand the LFS books
143 and wish to automate the build. 99% of any problems that arise can be
144 solved by reading the book(s).
145
[3a27393]146 Q. "It doesn't work!"
[d20c553]147 A. Yes it does, try ./lfs --help
[9f46f8b]148
[3b63c8c]149 Q. "It still doesn't work"
150 A. jhalfs was designed to work against the developement versions of the LFS
151 series of books. Consequently changes in a book(s) sometimes breaks older
152 versions of jhalfs. Before you start pulling out your hair download the
153 latest version of jhalfs to see if that solves your problem.
154
[3a27393]155 Q. "How do I specify the build location?"
[3b63c8c]156 A. The original LFS document worked against the well known location /mnt/lfs.
[65d83a6]157 This script automates the build of all of the LFS series of books and uses
[3b63c8c]158 a generic location $BUILDDIR with a default value of /mnt/build_dir.
[65d83a6]159 You may change this value to suit your needs.
[9f46f8b]160
[65d83a6]161 The layout below $BUILDDIR is as follows.
162 $BUILDDIR/
163 jhalfs (makefile,cmd scripts,logs..etc)
[d20c553]164 sources (where packages reside)
[9f46f8b]165 tools (temporary bootstrap system)
[d20c553]166 cross-tools (temporary CLFS only)
[65d83a6]167 ...
168 FHS dir structure
169 ...
[9f46f8b]170
[3a27393]171 Q. "What is the function of the SRC_ARCHIVE variable?"
[fed9756]172 A. When then symlinked master.sh runs it creates a local copy of the
[3b63c8c]173 necessary packages in BUILDDIR/sources by downloading the files. If
174 the variable SRC_ARCHIVE is defined the software will first look in
[fed9756]175 this location for the file and, if found, will copy it to BUILDDIR/sources.
[3b63c8c]176 If the files are not found in SRC_ARCHIVE _and_ you have write priv to
[fed9756]177 the directory any downloaded files will be mirrored there.
[9f46f8b]178
[3a27393]179 Q. "How do I set the SRC_ARCHIVE location?"
[65d83a6]180 A. The best way to set the value of SRC_ARCHIVE is
181 export SRC_ARCHIVE=/wherever/you/store/downloaded/packages
182 OR
[3b63c8c]183 you can change the setting in common/config.
[9f46f8b]184
[3a27393]185 Q. "Why have 2 copies of the files?"
[3b63c8c]186 A. The package files must be visible during the chroot phase and this is a
[466b5cc]187 simple and reliable method of doing so. This method also handles the CLFS
188 build method where the final build may be done on a separate machine.
[fcf5226]189
[3b63c8c]190 Q. "When I try to build 'xxx' with clfs the makefile fails at the mid-point"
191 A. There could be numerous reasons for the failure but the most likely reason
192 is you are doing a cross-build using the 'chroot' method and the target is
193 not compatible with the host. If you choose to build using the chroot
194 method a test is performed at the end of the temptools phase. If the test
195 succeeds the build continues inside a chroot jail. However if the test fails
196 it means the host and target are not compatible an you should use the
197 'boot' method to create your target code.
198 As an extreme example: You can build a sparc target on a x86 platform but
199 only the temptools phase. You must run ./clfs using the 'boot' method and
200 not the 'chroot.' You must transfer the toolchain to a sparc platform, reboot
201 the sparc box and continue the build.
202 Of all the LFS series of books Cross-LFS requires the greatest
203 understanding of host/target hardware combination. Please read the book
204 carefully and don't skip the easy parts (there are none..)
205
[fcf5226]206Authors:
[67e3bc3]207 George Boudreau
[fcf5226]208 Manuel Canales Esparcia
[67e3bc3]209 Jeremy Huntwork
Note: See TracBrowser for help on using the repository browser.