source: common/func_validate_configs.sh@ f15fe85

experimental
Last change on this file since f15fe85 was f15fe85, checked in by George Boudreau <georgeb@…>, 19 years ago

common/func_validate_configs.sh, shuffle the testing order for config variables.

  • Property mode set to 100644
File size: 9.9 KB
Line 
1# $Id$
2
3validate_target() {
4
5 local -r ERROR_MSG_pt1='The variable \"${L_arrow}TARGET${R_arrow}\" value ${L_arrow}${BOLD}${TARGET}${R_arrow} is invalid for the ${L_arrow}${BOLD}${ARCH}${R_arrow} architecture'
6 local -r ERROR_MSG_pt2=' check the config file ${BOLD}${GREEN}\<$(echo $PROGNAME | tr [a-z] [A-Z])/config\> or \<common/config\>${OFF}'
7
8 local -r PARAM_VALS='TARGET: ${L_arrow}${BOLD}${TARGET}${OFF}${R_arrow}'
9 local -r PARAM_VALS2='TARGET32: ${L_arrow}${BOLD}${TARGET32}${OFF}${R_arrow}'
10
11 write_error_and_die() {
12 echo -e "\n${DD_BORDER}"
13 echo -e "`eval echo ${ERROR_MSG_pt1}`" >&2
14 echo -e "`eval echo ${ERROR_MSG_pt2}`" >&2
15 echo -e "${DD_BORDER}\n"
16 exit 1
17 }
18
19 if [[ ! "${TARGET32}" = "" ]]; then
20 [[ $verbose = "1" ]] && echo -e "`eval echo $PARAM_VALS2`"
21 fi
22 [[ $verbose = "1" ]] && echo -e "`eval echo $PARAM_VALS`"
23
24 case "${ARCH}" in
25 "x86") [[ "${TARGET}" = "i486-pc-linux-gnu" ]] && return
26 [[ "${TARGET}" = "i586-pc-linux-gnu" ]] && return
27 [[ "${TARGET}" = "i686-pc-linux-gnu" ]] && return
28 write_error_and_die
29 ;;
30 "ppc") [[ "${TARGET}" = "powerpc-unknown-linux-gnu" ]] && return
31 write_error_and_die
32 ;;
33 "mips") [[ "${TARGET}" = "mipsel-unknown-linux-gnu" ]] && return
34 [[ "${TARGET}" = "mips-unknown-linux-gnu" ]] && return
35 write_error_and_die
36 ;;
37 "sparc") [[ "${TARGET}" = "sparcv9-unknown-linux-gnu" ]] && return
38 write_error_and_die
39 ;;
40 "sparcv8") [[ "${TARGET}" = "sparc-unknown-linux-gnu" ]] && return
41 write_error_and_die
42 ;;
43 "x86_64-64") [[ "${TARGET}" = "x86_64-unknown-linux-gnu" ]] && return
44 write_error_and_die
45 ;;
46 "mips64-64") [[ "${TARGET}" = "mipsel-unknown-linux-gnu" ]] && return
47 [[ "${TARGET}" = "mips-unknown-linux-gnu" ]] && return
48 write_error_and_die
49 ;;
50 "sparc64-64") [[ "${TARGET}" = "sparc64-unknown-linux-gnu" ]] && return
51 write_error_and_die
52 ;;
53 "alpha") [[ "${TARGET}" = "alpha-unknown-linux-gnu" ]] && return
54 write_error_and_die
55 ;;
56 "x86_64") [[ "${TARGET}" = "x86_64-unknown-linux-gnu" ]] &&
57 [[ "${TARGET32}" = "i686-pc-linux-gnu" ]] && return
58 write_error_and_die
59 ;;
60 "mips64") [[ "${TARGET}" = "mipsel-unknown-linux-gnu" ]] &&
61 [[ "${TARGET32}" = "mipsel-unknown-linux-gnu" ]] && return
62
63 [[ "${TARGET}" = "mips-unknown-linux-gnu" ]] &&
64 [[ "${TARGET32}" = "mips-unknown-linux-gnu" ]] && return
65 write_error_and_die
66 ;;
67 "sparc64") [[ "${TARGET}" = "sparc64-unknown-linux-gnu" ]] &&
68 [[ "${TARGET32}" = "sparcv9-unknown-linux-gnu" ]] && return
69 write_error_and_die
70 ;;
71 "ppc64") [[ "${TARGET}" = "powerpc64-unknown-linux-gnu" ]] &&
72 [[ "${TARGET32}" = "powerpc-unknown-linux-gnu" ]] && return
73 write_error_and_die
74 ;;
75 *) write_error_and_die
76 esac
77}
78
79
80#----------------------------#
81validate_config() { # Are the config values sane (within reason)
82#----------------------------#
83: <<inline_doc
84 Validates the configuration parameters. The global var PROGNAME selects the
85 parameter list.
86
87 input vars: $1 0/1 0=quiet, 1=verbose output
88 externals: color constants
89 PROGNAME (lfs,clfs,hlfs,blfs)
90 modifies: none
91 returns: nothing
92 on error: write text to console and dies
93 on success: write text to console and returns
94inline_doc
95
96 local -r blfs_PARAM_LIST="BUILDDIR SRC_ARCHIVE TEST LANG DEPEND"
97 local -r hlfs_PARAM_LIST="BUILDDIR SRC_ARCHIVE TEST HPKG RUNMAKE STRIP PAGE TIMEZONE LC_ALL LANG KEYMAP FSTAB CONFIG MODEL GRSECURITY_HOST"
98 local -r clfs_PARAM_LIST="BUILDDIR SRC_ARCHIVE TEST HPKG RUNMAKE STRIP PAGE TIMEZONE LANG VIMLANG KEYMAP ARCH TARGET FSTAB CONFIG BOOT_CONFIG METHOD"
99 local -r lfs_PARAM_LIST="BUILDDIR SRC_ARCHIVE TEST HPKG RUNMAKE STRIP PAGE TIMEZONE LANG VIMLANG FSTAB CONFIG"
100
101 local -r ERROR_MSG_pt1='The variable \"${L_arrow}${config_param}${R_arrow}\" value ${L_arrow}${BOLD}${!config_param}${R_arrow} is invalid,'
102 local -r ERROR_MSG_pt2=' check the config file ${BOLD}${GREEN}\<$(echo $PROGNAME | tr [a-z] [A-Z])/config\> or \<common/config\>${OFF}'
103 local -r PARAM_VALS='${config_param}: ${L_arrow}${BOLD}${!config_param}${OFF}${R_arrow}'
104
105 local PARAM_LIST=
106
107 local config_param
108 local validation_str
109 local verbose=$1
110
111 write_error_and_die() {
112 echo -e "\n${DD_BORDER}"
113 echo -e "`eval echo ${ERROR_MSG_pt1}`" >&2
114 echo -e "`eval echo ${ERROR_MSG_pt2}`" >&2
115 echo -e "${DD_BORDER}\n"
116 exit 1
117 }
118
119 validate_str() {
120 # This is the 'regexp' test available in bash-3.0..
121 # using it as a poor man's test for substring
122 [[ $verbose = "1" ]] && echo -e "`eval echo $PARAM_VALS`"
123 if [[ ! "${validation_str}" =~ "x${!config_param}x" ]] ; then
124 # parameter value entered is no good
125 write_error_and_die
126 fi
127 }
128
129 set +e
130 for PARAM_GROUP in ${PROGNAME}_PARAM_LIST; do
131 for config_param in ${!PARAM_GROUP}; do
132 # This is a tricky little piece of code.. executes a cmd string.
133 case $config_param in
134 BUILDDIR) # We cannot have an <empty> or </> root mount point
135 [[ $verbose = "1" ]] && echo -e "`eval echo $PARAM_VALS`"
136 if [[ "xx x/x" =~ "x${!config_param}x" ]]; then
137 write_error_and_die
138 fi
139 continue ;;
140 TIMEZONE) continue;;
141 MKFILE) continue;;
142 HPKG) validation_str="x0x x1x"; validate_str; continue ;;
143 RUNMAKE) validation_str="x0x x1x"; validate_str; continue ;;
144 TEST) validation_str="x0x x1x x2x x3x"; validate_str; continue ;;
145 STRIP) validation_str="x0x x1x"; validate_str; continue ;;
146 VIMLANG) validation_str="x0x x1x"; validate_str; continue ;;
147 DEPEND) validation_str="x0x x1x x2x"; validate_str; continue ;;
148 MODEL) validation_str="xglibcx xuclibcx"; validate_str; continue ;;
149 PAGE) validation_str="xletterx xA4x"; validate_str; continue ;;
150 GRSECURITY_HOST) validation_str="x0x x1x"; validate_str; continue ;;
151 METHOD) validation_str="xchrootx xbootx"; validate_str; continue ;;
152 ARCH) validation_str="xx86x xx86_64x xx86_64-64x xsparcx xsparcv8x xsparc64x xsparc64-64x xmipsx xmips64x xmips64-64x xppcx xppc64x xalphax"; validate_str; continue ;;
153 TARGET) validate_target; continue ;;
154 esac
155
156
157 if [[ "${config_param}" = "LC_ALL" ]]; then
158 [[ $1 = "1" ]] && echo "`eval echo $PARAM_VALS`"
159 [[ -z "${!config_param}" ]] && continue
160 # See it the locale values exist on this machine
161 if [[ "`locale -a | grep -c ${!config_param}`" > 0 ]]; then
162 continue
163 else # If you make it this far then there is a problem
164 write_error_and_die
165 fi
166 fi
167
168 if [[ "${config_param}" = "LANG" ]]; then
169 [[ $verbose = "1" ]] && echo "`eval echo $PARAM_VALS`"
170 [[ -z "${!config_param}" ]] && continue
171 # See it the locale values exist on this machine
172 if [[ "`locale -a | grep -c ${!config_param}`" > 0 ]]; then
173 continue
174 else # If you make it this far then there is a problem
175 write_error_and_die
176 fi
177 fi
178
179
180 if [[ "${config_param}" = "KEYMAP" ]]; then
181 [[ $verbose = "1" ]] && echo "`eval echo $PARAM_VALS`"
182 [[ "${!config_param}" = "none" ]] && continue
183 if [[ -e "/usr/share/kbd/keymaps/${!config_param}" ]] &&
184 [[ -s "/usr/share/kbd/keymaps/${!config_param}" ]]; then
185 continue
186 else
187 write_error_and_die
188 fi
189 fi
190
191 if [[ "${config_param}" = "SRC_ARCHIVE" ]]; then
192 [[ $verbose = "1" ]] && echo -n "`eval echo $PARAM_VALS`"
193 if [ ! -z ${SRC_ARCHIVE} ]; then
194 if [ ! -d ${SRC_ARCHIVE} ]; then
195 echo " -- is NOT a directory"
196 write_error_and_die
197 fi
198 if [ ! -w ${SRC_ARCHIVE} ]; then
199 echo -n "${nl_} [${BOLD}${YELLOW}WARN$OFF] You do not have <write> access to this directory, ${nl_}${tab_}downloaded files can not be saved in this archive"
200 fi
201 fi
202 echo
203 continue
204 fi
205
206 if [[ "${config_param}" = "FSTAB" ]]; then
207 [[ $verbose = "1" ]] && echo "`eval echo $PARAM_VALS`"
208 [[ -z "${!config_param}" ]] && continue
209 if [[ -e "${!config_param}" ]] &&
210 [[ -s "${!config_param}" ]]; then
211 continue
212 else
213 write_error_and_die
214 fi
215 fi
216
217 if [[ "${config_param}" = "BOOK" ]]; then
218 [[ $verbose = "1" ]] && echo "`eval echo $PARAM_VALS`"
219 [[ ! "${WC}" = 1 ]] && continue
220 [[ -z "${!config_param}" ]] && continue
221 if [[ -e "${!config_param}" ]] &&
222 [[ -s "${!config_param}" ]]; then
223 continue
224 else
225 write_error_and_die
226 fi
227 fi
228
229 if [[ "${config_param}" = "CONFIG" ]]; then
230 [[ $verbose = "1" ]] && echo "`eval echo $PARAM_VALS`"
231 [[ -z "${!config_param}" ]] && continue
232 if [[ -e "${!config_param}" ]] &&
233 [[ -s "${!config_param}" ]]; then
234 continue
235 else
236 write_error_and_die
237 fi
238 fi
239
240 if [[ "${config_param}" = "BOOT_CONFIG" ]]; then
241 if [[ "${METHOD}" = "boot" ]]; then
242 [[ $verbose = "1" ]] && echo "`eval echo $PARAM_VALS`"
243 # There must be a config file when the build method is 'boot'
244 [[ -e "${!config_param}" ]] && [[ -s "${!config_param}" ]] && continue
245 # If you make it this far then there is a problem
246 write_error_and_die
247 fi
248 fi
249 done
250 done
251
252 set -e
253 echo "$tab_***${BOLD}${GREEN} ${PARAM_GROUP%%_*T} config parameters look good${OFF} ***"
254}
Note: See TracBrowser for help on using the repository browser.