source: common/libs/func_validate_configs.sh@ 4dfe8f9

ablfs-more trunk
Last change on this file since 4dfe8f9 was 29615d9, checked in by Pierre Labastie <pierre.labastie@…>, 2 years ago

Remove the "Abort on testsuite failure" config (3)

Remove the display of BOMB_TEST when validating the config.

  • Property mode set to 100644
File size: 9.6 KB
RevLine 
[c14e4b3]1declare -r dotSTR=".................."
2
[877cc6a]3
4#----------------------------#
[45f82718]5validate_config() { # Are the config values sane (within reason)
[877cc6a]6#----------------------------#
7: <<inline_doc
[8825e69]8 Validates the configuration parameters.
[877cc6a]9
10 input vars: none
11 externals: color constants
12 modifies: none
13 returns: nothing
[45f82718]14 on error: write text to console and dies
[877cc6a]15 on success: write text to console and returns
16inline_doc
17
[350625a]18 # Common settings by Config.in sections and books family
[8825e69]19 local -r BOOK_common="COMMIT BOOK CUSTOM_TOOLS"
[350625a]20 local -r GENERAL_common="LUSER LGROUP LHOME BUILDDIR CLEAN GETPKG SRC_ARCHIVE \
[de63126]21 SERVER RETRYSRCDOWNLOAD RETRYDOWNLOADCNT DOWNLOADTIMEOUT \
[3158dfa]22 RUNMAKE"
[29615d9]23 local -r BUILD_chroot="TEST STRIP"
[f546320]24 local -r BUILD_common="FSTAB CONFIG TIMEZONE PAGE LANG INSTALL_LOG"
[f596dde]25 local -r ADVANCED_chroot="COMPARE RUN_ICA ITERATIONS OPTIMIZE"
[350625a]26 local -r ADVANCED_common="REPORT REBUILD_MAKEFILE"
27
28 # BOOK Settings by book
[878a5a0]29 local -r LFS_book="$BOOK_common INITSYS BLFS_TOOL"
[350625a]30
31 # Build Settings by book
[085435e]32 local -r LFS_build="$BUILD_chroot NCURSES5 DEL_LA_FILES $BUILD_common PKGMNGT FULL_LOCALE WRAP_INSTALL"
[350625a]33
[0fa52f2]34 # System Settings by book
[3b43e17b]35 local -r LFS_system="HOSTNAME INTERFACE IP_ADDR GATEWAY PREFIX BROADCAST DOMAIN DNS1 DNS2 FONT KEYMAP LOCAL LOG_LEVEL"
[945ccaa]36
[350625a]37 # Full list of books settings
[52cced4]38 local -r lfs_PARAM_LIST="$LFS_book $GENERAL_common $LFS_build $LFS_system $ADVANCED_chroot N_PARALLEL REALSBU SAVE_CH5 $ADVANCED_common"
[854854e]39# local -r blfs_PARAM_LIST="BRANCH_ID BLFS_ROOT BLFS_XML TRACKING_DIR"
[877cc6a]40
[854854e]41 # Additional variables
42 local -r blfs_tool_PARAM_LIST="\
[9b99ada]43 BLFS_COMMIT BLFS_ROOT BLFS_XML TRACKING_DIR \
[f1fcb6b]44 DEP_LIBXML DEP_LIBXSLT DEP_DBXML DEP_LYNX DEP_SUDO DEP_WGET \
[dfab075]45 DEP_GIT DEP_GPM"
[53f291f]46 local -r custom_tool_PARAM_LIST="TRACKING_DIR"
[4965fa8]47
[350625a]48 # Internal variables
[877cc6a]49 local -r ERROR_MSG_pt1='The variable \"${L_arrow}${config_param}${R_arrow}\" value ${L_arrow}${BOLD}${!config_param}${R_arrow} is invalid,'
[4965fa8]50 local -r ERROR_MSG_pt2='rerun make and fix your configuration settings${OFF}'
[c14e4b3]51 local -r PARAM_VALS='${config_param}${dotSTR:${#config_param}} ${L_arrow}${BOLD}${!config_param}${OFF}${R_arrow}'
[877cc6a]52
[3e7ceed]53 local PARAM_LIST=
[877cc6a]54 local config_param
55 local validation_str
[45f82718]56 local save_param
[877cc6a]57
58 write_error_and_die() {
59 echo -e "\n${DD_BORDER}"
60 echo -e "`eval echo ${ERROR_MSG_pt1}`" >&2
61 echo -e "`eval echo ${ERROR_MSG_pt2}`" >&2
62 echo -e "${DD_BORDER}\n"
63 exit 1
64 }
65
[3aa1acd]66# This function is only used when testing package management files.
67 write_pkg_and_die() {
68 echo -e "\n${DD_BORDER}"
69 echo "Package management is requested but" >&2
70 echo -e $* >&2
71 echo -e "${DD_BORDER}\n"
72 exit 1
73 }
74
[45f82718]75 validate_file() {
76 # For parameters ending with a '+' failure causes a warning message only
77 echo -n "`eval echo $PARAM_VALS`"
78 while test $# -gt 0 ; do
79 case $1 in
80 # Failures caused program exit
81 "-z") [[ -z "${!config_param}" ]] && echo "${tab_}<-- NO file name given" && write_error_and_die ;;
82 "-e") [[ ! -e "${!config_param}" ]] && echo "${tab_}<-- file does not exist" && write_error_and_die ;;
83 "-s") [[ ! -s "${!config_param}" ]] && echo "${tab_}<-- file has zero bytes" && write_error_and_die ;;
84 "-r") [[ ! -r "${!config_param}" ]] && echo "${tab_}<-- no read permission " && write_error_and_die ;;
85 "-w") [[ ! -w "${!config_param}" ]] && echo "${tab_}<-- no write permission" && write_error_and_die ;;
86 "-x") [[ ! -x "${!config_param}" ]] && echo "${tab_}<-- file cannot be executed" && write_error_and_die ;;
87 # Warning messages only
88 "-z+") [[ -z "${!config_param}" ]] && echo && return ;;
89 esac
90 shift 1
91 done
92 echo
93 }
94
95 validate_dir() {
96 # For parameters ending with a '+' failure causes a warning message only
97 echo -n "`eval echo $PARAM_VALS`"
98 while test $# -gt 0 ; do
99 case $1 in
100 "-z") [[ -z "${!config_param}" ]] && echo "${tab_}NO directory name given" && write_error_and_die ;;
101 "-d") [[ ! -d "${!config_param}" ]] && echo "${tab_}This is NOT a directory" && write_error_and_die ;;
102 "-w") if [[ ! -w "${!config_param}" ]]; then
103 echo "${nl_}${DD_BORDER}"
104 echo "${tab_}${RED}You do not have ${L_arrow}write${R_arrow}${RED} access to the directory${OFF}"
105 echo "${tab_}${BOLD}${!config_param}${OFF}"
106 echo "${DD_BORDER}${nl_}"
107 exit 1
108 fi ;;
109 # Warnings only
110 "-w+") if [[ ! -w "${!config_param}" ]]; then
111 echo "${nl_}${DD_BORDER}"
112 echo "${tab_}WARNING-- You do not have ${L_arrow}write${R_arrow} access to the directory${OFF}"
113 echo "${tab_} -- ${BOLD}${!config_param}${OFF}"
114 echo "${DD_BORDER}"
115 fi ;;
116 "-z+") [[ -z "${!config_param}" ]] && echo "${tab_}<-- NO directory name given" && return
117 esac
118 shift 1
119 done
120 echo
121 }
122
[877cc6a]123 set +e
[8825e69]124 for config_param in $lfs_PARAM_LIST; do
[45f82718]125 case $config_param in
[4da2512]126 # Envvars that depend on other settings to be displayed
[de63126]127 COMPARE) [[ ! "$COMPARE" = "y" ]] && echo -e "`eval echo $PARAM_VALS`" ;;
128 RUN_ICA) [[ "$COMPARE" = "y" ]] && echo -e "`eval echo $PARAM_VALS`" ;;
129 ITERATIONS) [[ "$COMPARE" = "y" ]] && echo -e "`eval echo $PARAM_VALS`" ;;
130 TARGET32) [[ -n "${TARGET32}" ]] && echo -e "`eval echo $PARAM_VALS`" ;;
131 MIPS_LEVEL) [[ "${ARCH}" = "mips" ]] && echo -e "`eval echo $PARAM_VALS`" ;;
132 SERVER) [[ "$GETPKG" = "y" ]] && echo -e "`eval echo $PARAM_VALS`" ;;
133 RETRYSRCDOWNLOAD) [[ "$GETPKG" = "y" ]] && echo -e "`eval echo $PARAM_VALS`" ;;
134 RETRYDOWNLOADCNT) [[ "$GETPKG" = "y" ]] && echo -e "`eval echo $PARAM_VALS`" ;;
135 DOWNLOADTIMEOUT) [[ "$GETPKG" = "y" ]] && echo -e "`eval echo $PARAM_VALS`" ;;
[52cced4]136 N_PARALLEL) [[ "$OPTIMIZE" -gt "0" ]] && echo -e "`eval echo $PARAM_VALS`" ;;
[84a3fda]137 REALSBU) [[ "$OPTIMIZE" = "2" ]] && echo -e "`eval echo $PARAM_VALS`" ;;
[4da2512]138
139 # Envars that requires some validation
140 LUSER) echo -e "`eval echo $PARAM_VALS`"
141 [[ "${!config_param}" = "**EDIT ME**" ]] && write_error_and_die
142 ;;
143 LGROUP) echo -e "`eval echo $PARAM_VALS`"
144 [[ "${!config_param}" = "**EDIT ME**" ]] && write_error_and_die
145 ;;
146 # BOOK validation. Very ugly, need be fixed
[4965fa8]147 BOOK) if [[ "${WORKING_COPY}" = "y" ]] ; then
[45f82718]148 validate_dir -z -d
149 else
[4da2512]150 echo -e "`eval echo $PARAM_VALS`"
[0210014]151 fi
152 ;;
[4da2512]153 # Validate directories, testable states:
154 # fatal -z -d -w,
155 # warning -z+ -w+
[401f81e]156 SRC_ARCHIVE) [[ "$GETPKG" = "y" ]] && validate_dir -z+ -d -w+ ;;
[4da2512]157 # The build directory/partition MUST exist and be writable by the user
[c7b535b]158 BUILDDIR) validate_dir -z -d
[a96109a]159 [[ "xx x/x" =~ x${!config_param}x ]] && write_error_and_die ;;
[962793a]160 LHOME) validate_dir -z -d ;;
[45f82718]161
[4da2512]162 # Validate files, testable states:
163 # fatal -z -e -s -w -x -r,
164 # warning -z+
[45f82718]165 FSTAB) validate_file -z+ -e -s ;;
166 CONFIG) validate_file -z+ -e -s ;;
167 BOOT_CONFIG) [[ "${METHOD}" = "boot" ]] && validate_file -z -e -s ;;
168
[5c575e1]169 # Treatment of LANG parameter
170 LANG ) # See it the locale value has been set
[45f82718]171 echo -n "`eval echo $PARAM_VALS`"
172 [[ -z "${!config_param}" ]] &&
173 echo " -- Variable $config_param cannot be empty!" &&
174 write_error_and_die
175 echo
176 ;;
[c59f9a0]177
[945ccaa]178 # Treatment of HOSTNAME
179 HOSTNAME) echo -e "`eval echo $PARAM_VALS`"
180 [[ "${!config_param}" = "**EDIT ME**" ]] && write_error_and_die
181 ;;
182
[3aa1acd]183 # Case of PKGMNGT: two files, packageManager.xml and packInstall.sh
[c67990f]184 # must exist in $PKGMNGTDIR if PKGMNGT='y':
[3aa1acd]185 PKGMNGT) echo -e "`eval echo $PARAM_VALS`"
[c67990f]186 if [ "$PKGMNGT" = y ]; then
187 if [ ! -e "$PKGMNGTDIR/packageManager.xml" ]; then
188 write_pkg_and_die $PKGMNGTDIR/packageManager.xml does not exist
189 fi
190 if [ ! -e "$PKGMNGTDIR/packInstall.sh" ]; then
191 write_pkg_and_die $PKGMNGTDIR/packInstall.sh does not exist
192 fi
193 if [ ! -s "$PKGMNGTDIR/packageManager.xml" ]; then
194 write_pkg_and_die $PKGMNGTDIR/packageManager.xml has zero size
195 fi
196 if [ ! -s "$PKGMNGTDIR/packInstall.sh" ]; then
197 write_pkg_and_die $PKGMNGTDIR/packInstall.sh has zero size
198 fi
199 if [ ! -r "$PKGMNGTDIR/packageManager.xml" ]; then
200 write_pkg_and_die $PKGMNGTDIR/packageManager.xml is not readable
201 fi
202 if [ ! -r "$PKGMNGTDIR/packInstall.sh" ]; then
203 write_pkg_and_die $PKGMNGTDIR/packInstall.sh is not readable
204 fi
[3aa1acd]205 fi
206 ;;
[8825e69]207 # Display non-validated envars found in lfs_PARAM_LIST
[350625a]208 * ) echo -e "`eval echo $PARAM_VALS`" ;;
209
[45f82718]210 esac
211 done
[4965fa8]212
213 if [[ "${BLFS_TOOL}" = "y" ]] ; then
214 echo "${nl_} ${BLUE}blfs-tool settings${OFF}"
215 for config_param in ${blfs_tool_PARAM_LIST}; do
216 echo -e "`eval echo $PARAM_VALS`"
217 done
218 fi
219
[53f291f]220 if [[ "${CUSTOM_TOOLS}" = "y" ]] && [[ "${BLFS_TOOL}" = "n" ]] ; then
221 for config_param in ${custom_tool_PARAM_LIST}; do
222 echo -e "`eval echo $PARAM_VALS`"
223 done
224 fi
225
[877cc6a]226 set -e
[21f0a91]227 echo "${nl_}***${BOLD}${GREEN} ${PARAM_GROUP%%_*T} config parameters look good${OFF} ***${nl_}"
[877cc6a]228}
Note: See TracBrowser for help on using the repository browser.