source: common/makefile-functions@ 3fed586

ablfs
Last change on this file since 3fed586 was f62e4c5, checked in by Pierre Labastie <pierre@…>, 11 years ago

merge trunk rev 3710

  • Property mode set to 100644
File size: 8.8 KB
RevLine 
[877cc6a]1
2# $Id$
3
[045b2dc]4BOLD = "[0;1m"
5RED = "[1;31m"
6GREEN = "[0;32m"
7ORANGE = "[0;33m"
8BLUE = "[1;34m"
9WHITE = "[00m"
10YELLOW = "[1;33m"
11
12OFF = "[0m"
13REVERSE = "[7m"
14
[fc6076c]15tab_ = " "
16nl_ = ""
[045b2dc]17
[1f81129]18#==== BUILD MESSAGES ===
19
[045b2dc]20define echo_PHASE
21 @echo $(BOLD)--------------------------------------------------------------------------------
[f4d9a48]22 @echo $(tab_)$(tab_)Executing $(BLUE)$(1)$(WHITE) scripts
[045b2dc]23 @echo $(BOLD)--------------------------------------------------------------------------------
[39a93a4]24 @echo $(WHITE)
[045b2dc]25endef
26
[79da297]27define sh_echo_PHASE
28 echo $(BOLD)--------------------------------------------------------------------------------;\
29 echo $(tab_)$(tab_)Executing $(BLUE)$(1)$(WHITE) scripts; \
[7072e1f]30 echo $(BOLD)--------------------------------------------------------------------------------$(WHITE)
[79da297]31endef
32
[045b2dc]33define echo_SU_request
34 @echo $(BOLD)--------------------------------------------------------------------------------
35 @echo $(BLUE)$@
[0cc9d4e]36 @echo $(WHITE)ROOT privilege is required to perform a number of commands
37 @echo sudo will request a password in order to execute all high privilege commands
[44b831e]38endef
[045b2dc]39
40define echo_SULUSER_request
41 @echo $(BOLD)--------------------------------------------------------------------------------
42 @echo $(BOLD)$(BLUE)$@
43 @echo $(WHITE)You are going to log into the user account $(BOLD)$(YELLOW)$(LUSER)$(OFF)
[3e7ceed]44 @echo sudo requires a password
[045b2dc]45endef
46
47define echo_CHROOT_request
48 @echo $(BOLD)--------------------------------------------------------------------------------
49 @echo $(BOLD)$(BLUE)$@
50 @echo $(WHITE)You are going to CHROOT into $(MOUNT_PT) $(BOLD)$(YELLOW)$(LUSER)$(OFF)
51 @echo a password is required
52endef
[877cc6a]53
54define echo_message
[045b2dc]55 @echo $(BOLD)--------------------------------------------------------------------------------
56 @echo $(BOLD)$(1) target $(BLUE)$@$(BOLD)$(WHITE)
[877cc6a]57endef
58
[1f81129]59#=======================
60
61
62#=== BUILD FUNCTIONS ===
63
[401f81e]64define remove_existing_dirs
65 @PKG_PATH=`ls -t $(SRCSDIR)/$(1) | head -n1` && \
66 ROOT=`tar -tf $$PKG_PATH | head -n1 | sed -e 's@^./@@;s@/.*@@'` && \
[3abe9d7]67 [ -n "$$ROOT" ] && \
[b533b78]68 if [ -d $(SRCSDIR)/$$ROOT ]; then \
[3abe9d7]69 rm -rf $(SRCSDIR)/$$ROOT && \
70 rm -rf $(SRCSDIR)/$${ROOT%-*}-build; \
71 fi;
[401f81e]72endef
73
74define remove_existing_dirs2
[045b2dc]75 @PKG_PATH=`ls -t $(SRC)/$(1) | head -n1` && \
[401f81e]76 ROOT=`tar -tf $$PKG_PATH | head -n1 | sed -e 's@^./@@;s@/.*@@'` && \
[3abe9d7]77 [ -n "$$ROOT" ] && \
78 if [ -d $(SRC)/$$ROOT ]; then \
79 rm -rf $(SRC)/$$ROOT && \
80 rm -rf $(SRC)/$${ROOT%-*}-build; \
81 fi;
[7072e1f]82 @if [ "$(PKGMNGT)" = "y" ] && [ -d $(SRC)/$@ ]; then \
83 rm -rf $(SRC)/$@ && rm -f $(SRC)/*.deb; \
84 fi;
[401f81e]85endef
86
[1f81129]87#==#
[401f81e]88
[1f81129]89define unpack
90 @cd $(SRCSDIR) && \
91 tar -xvf `ls -t $(1) | head -n1` > $(PKG_LST)
[401f81e]92endef
93
[1f81129]94define unpack2
95 @cd $(SRC) && \
96 tar -xvf `ls -t $(1) | head -n1` > $(PKG_LST)
[401f81e]97endef
98
[1f81129]99#==#
100
[401f81e]101define get_pkg_root
102 @ROOT=`head -n1 $(SRCSDIR)/$(PKG_LST) | sed 's@^./@@;s@/.*@@'` && \
103 if [ "$(1)" != "nouser" ]; then \
104 echo "export PKGDIR=$(SRCSDIR)/$$ROOT" > envars; \
105 chown -R $(LUSER) $(SRCSDIR)/$$ROOT; \
106 else \
107 echo "export PKGDIR=$(crSRCSDIR)/$$ROOT" > envars; \
108 fi;
109endef
110
111define get_pkg_root2
112 @ROOT=`head -n1 $(SRC)/$(PKG_LST) | sed 's@^./@@;s@/.*@@'` && \
[7072e1f]113 echo "export PKGDIR=$(SRC)/$$ROOT" > envars; \
114 if [ "$(PKGMNGT)" = "y" ]; then \
115 echo "export PKG_DEST=$(SRC)/$@" >> envars; \
116 echo "source packInstall.sh" >> envars; \
117 echo "export -f packInstall" >> envars; \
118 fi;
[401f81e]119endef
120
[045b2dc]121define get_pkg_root_LUSER
122 @ROOT=`head -n1 $(SRCSDIR)/$(PKG_LST) | sed 's@^./@@;s@/.*@@'` && \
123 echo "export PKGDIR=$(SRCSDIR)/$$ROOT" > envars
124endef
125
[1f81129]126#==#
127
[93346ee]128define touch_timestamp
129 @touch $(SRC)/timestamp-marker && sleep 1
130endef
131
[f546320]132define touch_timestamp_LUSER
[a60ed79]133 @touch $(SRCSDIR)/timestamp-marker && sleep 1
[f546320]134endef
135
[93346ee]136define log_new_files
[6dfed89]137 @find / -xdev ! -path "/$(SCRIPT_ROOT)/*" ! -path "/tmp/*" ! -path "$(SRC)/*" \
[93346ee]138 -newer $(SRC)/timestamp-marker -not -type d \
[c6f33fb]139 -printf "%p\t%s\t%u:%g\t%m\t%l\n" | sort > $(crFILELOGDIR)/$(1)
[93346ee]140endef
141
[f546320]142define log_new_files_LUSER
[a60ed79]143 @find $(BASEDIR) -xdev ! -path "$(BASEDIR)/$(SCRIPT_ROOT)/*" ! -path "$(BASEDIR)/tmp/*" ! -path "$(SRCSDIR)/*" \
144 -newer $(SRCSDIR)/timestamp-marker -not -type d \
[f546320]145 -printf "%p\t%s\t%u:%g\t%m\t%l\n" | sort > $(BASEDIR)$(crFILELOGDIR)/$(1)
146endef
147
[93346ee]148#==@
149
[1f81129]150define remove_build_dirs
151 @ROOT=`head -n1 $(SRCSDIR)/$(PKG_LST) | sed 's@^./@@;s@/.*@@'` && \
152 rm -rf $(SRCSDIR)/$$ROOT && \
153 rm -rf $(SRCSDIR)/$(1)-build
[877cc6a]154endef
155
[1f81129]156define remove_build_dirs2
157 @ROOT=`head -n1 $(SRC)/$(PKG_LST) | sed 's@^./@@;s@/.*@@'` && \
158 rm -rf $(SRC)/$$ROOT && \
159 rm -rf $(SRC)/$(1)-build
[877cc6a]160endef
161
[1f81129]162#==#
163
164define housekeeping
165 @touch $@ && \
166 sleep .25 && \
167 echo -e "\n" $(BOLD)Target $(BLUE)$@ $(WHITE)$(BOLD)OK && \
[dbcdfd7]168 echo --------------------------------------------------------------------------------$(WHITE) && \
169 if [ "$(BREAKPOINT)" = "$@" ] ; then \
170 echo $(tab_)$(RED)The build has been stopped at $(BLUE)$@ $(RED)as requested$(WHITE) ; \
171 false ; \
172 fi
[877cc6a]173endef
174
[1f81129]175#=======================
176
177
178#==== FINAL MESSAGES ===
179
[453bef0]180define echo_report
[7fe73c8]181 echo ; \
182 echo $(BOLD) The report file $(BLUE)$(1)$(BOLD) has been created ; \
183 echo ; \
184 echo $(WHITE)Please send the $(BOLD)$(MOUNT_PT)/jhalfs/$(1)$(WHITE) ; \
[76f8888]185 echo file to $(BOLD)jhalfs-reports@linuxfromscratch.org$(WHITE) ; \
[7fe73c8]186 echo ; \
187 echo That will help us to keep more accurate SBU and ; \
188 echo disk usage values into the book. Thanks. ; \
189 echo $(BOLD)--------------------------------------------------------------------------------$(WHITE)
[453bef0]190endef
191
[877cc6a]192define echo_finished
193 @echo $(BOLD)
194 @echo --------------------------------------------------------------------------------
195 @echo $(BOLD) Finished the build of $(BLUE)$(1)$(BOLD)
196 @echo --------------------------------------------------------------------------------
[f4d9a48]197 @echo $(tab_)$(tab_)$(RED)W A R N I N G$(BOLD)
[877cc6a]198 @echo --------------------------------------------------------------------------------
199 @echo
200 @echo To be able to boot your new system you need to follow
201 @echo the next steps:$(WHITE)
202 @echo
[76f8888]203 @echo $(tab_)- Mount the virtual kernel file systems.
204 @echo
[f4d9a48]205 @echo $(tab_)- Enter to the chroot using the command found
206 @echo $(tab_)in the section -Entering the Chroot Environment-
207 @echo $(tab_)except if building CLFS with METHOD=boot.
[877cc6a]208 @echo
[f4d9a48]209 @echo $(tab_)- Set a password for the root user.
[877cc6a]210 @echo
[76f8888]211 @echo $(tab_)- Edit or create /etc/fstab,
212 @echo $(tab_) " /etc/hosts,"
213 @echo $(tab_) " /etc/sysconfig/clock,"
214 @echo $(tab_) " /etc/sysconfig/console,"
215 @echo $(tab_) " /etc/sysconfig/network,"
[f62e4c5]216 @echo $(tab_) " /etc/sysconfig/ifconfig.eth0,"
217 @echo $(tab_) " /etc/resolv.conf"
[76f8888]218 @echo $(tab_)and any other configuration file required to suit your needs.
[877cc6a]219 @echo
[f4d9a48]220 @echo $(tab_)- Set-up the boot loader, except if building CLFS with METHOD=boot.
[76f8888]221 @echo
222 @echo $(tab_)You can set-up the new boot-loader installed on the new system
223 @echo $(tab_)or the host bootloader.
224 @echo
225 @echo $(tab_)If the last, it is better to exit first from the chroot.
226 @echo
227 @echo $(tab_)- Exit from the chroot and umount the filesystems.
[877cc6a]228 @echo
229 @echo If you are an experienced LFS user, several of those steps can be
230 @echo skipped or done in a different way. But then, that is something
231 @echo that you already know and there is no need to discuss it here.
232 @echo $(BOLD)
233 @echo --------------------------------------------------------------------------------
[f4d9a48]234 @echo $(tab_)$(tab_)$(GREEN)Have a nice day $(ORANGE):-\)$(BOLD)
[877cc6a]235 @echo --------------------------------------------------------------------------------$(WHITE)
236endef
237
238define echo_boot_finished
239 @echo $(BOLD)
240 @echo --------------------------------------------------------------------------------
241 @echo $(BOLD) Finished building a minimal boot system for $(BLUE)$(1)$(BOLD)
242 @echo --------------------------------------------------------------------------------
[f4d9a48]243 @echo $(tab_)$(tab_)$(RED)W A R N I N G$(BOLD)
[877cc6a]244 @echo --------------------------------------------------------------------------------
245 @echo
246 @echo The build is not complete. Follow the next steps:$(WHITE)
247 @echo
[f4d9a48]248 @echo $(tab_)- Edit or create $(MOUNT_PT)/etc/fstab
249 @echo $(tab_) and any other configuration file required to suit your needs.
[877cc6a]250 @echo $(BOLD)
251 @echo $(BOLD)$(YELLOW)
252 @echo 1.If it is necessary, transfer the newly created partition to the target machine
253 @echo 2.Boot the new partition.
254 @echo 3.Once you are logged in issue the following commands
[d981bde]255 @echo $(tab_) $(BOLD)cd /jhalfs
[f4d9a48]256 @echo $(tab_) $(BOLD)make makesys
[877cc6a]257 @echo The build process should resume. Follow any instructions that appear.
258 @echo --------------------------------------------------------------------------------
[f4d9a48]259 @echo $(tab_)$(tab_)$(GREEN)Have a nice day $(ORANGE):-\)$(BOLD)
[877cc6a]260 @echo --------------------------------------------------------------------------------$(WHITE)
261endef
Note: See TracBrowser for help on using the repository browser.