source: common/makefile-functions@ 81fca31

2.3 2.3.x 2.4 ablfs ablfs-more legacy new_features trunk
Last change on this file since 81fca31 was 6dfed89, checked in by Manuel Canales Esparcia <manuel@…>, 17 years ago

Removed redundant /proc and /dev skip on the installed files find command.

  • Property mode set to 100644
File size: 7.9 KB
RevLine 
[877cc6a]1
2# $Id$
3
[045b2dc]4BOLD = "[0;1m"
5RED = "[1;31m"
6GREEN = "[0;32m"
7ORANGE = "[0;33m"
8BLUE = "[1;34m"
9WHITE = "[00m"
10YELLOW = "[1;33m"
11
12OFF = "[0m"
13REVERSE = "[7m"
14
[fc6076c]15tab_ = " "
16nl_ = ""
[045b2dc]17
[1f81129]18#==== BUILD MESSAGES ===
19
[045b2dc]20define echo_PHASE
21 @echo $(BOLD)--------------------------------------------------------------------------------
[f4d9a48]22 @echo $(tab_)$(tab_)Executing $(BLUE)$(1)$(WHITE) scripts
[045b2dc]23 @echo $(BOLD)--------------------------------------------------------------------------------
[39a93a4]24 @echo $(WHITE)
[045b2dc]25endef
26
[79da297]27define sh_echo_PHASE
28 echo $(BOLD)--------------------------------------------------------------------------------;\
29 echo $(tab_)$(tab_)Executing $(BLUE)$(1)$(WHITE) scripts; \
30 echo $(BOLD)--------------------------------------------------------------------------------echo $(WHITE)
31endef
32
[045b2dc]33define echo_SU_request
34 @echo $(BOLD)--------------------------------------------------------------------------------
35 @echo $(BLUE)$@
36 @echo $(WHITE)ROOT privilege is required to perform a number commands
37 @echo sudo will request a password to all high privilege cmds to execute correctly
38endef
39
40define echo_SULUSER_request
41 @echo $(BOLD)--------------------------------------------------------------------------------
42 @echo $(BOLD)$(BLUE)$@
43 @echo $(WHITE)You are going to log into the user account $(BOLD)$(YELLOW)$(LUSER)$(OFF)
[3e7ceed]44 @echo sudo requires a password
[045b2dc]45endef
46
47define echo_CHROOT_request
48 @echo $(BOLD)--------------------------------------------------------------------------------
49 @echo $(BOLD)$(BLUE)$@
50 @echo $(WHITE)You are going to CHROOT into $(MOUNT_PT) $(BOLD)$(YELLOW)$(LUSER)$(OFF)
51 @echo a password is required
52endef
[877cc6a]53
54define echo_message
[045b2dc]55 @echo $(BOLD)--------------------------------------------------------------------------------
56 @echo $(BOLD)$(1) target $(BLUE)$@$(BOLD)$(WHITE)
[877cc6a]57endef
58
[1f81129]59#=======================
60
61
62#=== BUILD FUNCTIONS ===
63
[401f81e]64define remove_existing_dirs
65 @PKG_PATH=`ls -t $(SRCSDIR)/$(1) | head -n1` && \
66 ROOT=`tar -tf $$PKG_PATH | head -n1 | sed -e 's@^./@@;s@/.*@@'` && \
67 rm -rf $(SRCSDIR)/$$ROOT && \
68 rm -rf $(SRCSDIR)/$${ROOT%-*}-build
69endef
70
71define remove_existing_dirs2
[045b2dc]72 @PKG_PATH=`ls -t $(SRC)/$(1) | head -n1` && \
[401f81e]73 ROOT=`tar -tf $$PKG_PATH | head -n1 | sed -e 's@^./@@;s@/.*@@'` && \
74 rm -rf $(SRC)/$$ROOT && \
[d8851cf]75 rm -rf $(SRC)/$${ROOT%-*}-build
[401f81e]76endef
77
[1f81129]78#==#
[401f81e]79
[1f81129]80define unpack
81 @cd $(SRCSDIR) && \
82 tar -xvf `ls -t $(1) | head -n1` > $(PKG_LST)
[401f81e]83endef
84
[1f81129]85define unpack2
86 @cd $(SRC) && \
87 tar -xvf `ls -t $(1) | head -n1` > $(PKG_LST)
[401f81e]88endef
89
[1f81129]90#==#
91
[401f81e]92define get_pkg_root
93 @ROOT=`head -n1 $(SRCSDIR)/$(PKG_LST) | sed 's@^./@@;s@/.*@@'` && \
94 if [ "$(1)" != "nouser" ]; then \
95 echo "export PKGDIR=$(SRCSDIR)/$$ROOT" > envars; \
96 chown -R $(LUSER) $(SRCSDIR)/$$ROOT; \
97 else \
98 echo "export PKGDIR=$(crSRCSDIR)/$$ROOT" > envars; \
99 fi;
100endef
101
102define get_pkg_root2
103 @ROOT=`head -n1 $(SRC)/$(PKG_LST) | sed 's@^./@@;s@/.*@@'` && \
104 echo "export PKGDIR=$(SRC)/$$ROOT" > envars
105endef
106
[045b2dc]107define get_pkg_root_LUSER
108 @ROOT=`head -n1 $(SRCSDIR)/$(PKG_LST) | sed 's@^./@@;s@/.*@@'` && \
109 echo "export PKGDIR=$(SRCSDIR)/$$ROOT" > envars
110endef
111
[1f81129]112#==#
113
[93346ee]114define touch_timestamp
115 @touch $(SRC)/timestamp-marker && sleep 1
116endef
117
118define log_new_files
[6dfed89]119 @find / -xdev ! -path "/$(SCRIPT_ROOT)/*" ! -path "/tmp/*" ! -path "$(SRC)/*" \
[93346ee]120 -newer $(SRC)/timestamp-marker -not -type d \
121 -fprintf $(crFILELOGDIR)/$(1) "%p\t%s\t%u:%g\t%m\t%l\n" || true
122endef
123
124#==@
125
[1f81129]126define remove_build_dirs
127 @ROOT=`head -n1 $(SRCSDIR)/$(PKG_LST) | sed 's@^./@@;s@/.*@@'` && \
128 rm -rf $(SRCSDIR)/$$ROOT && \
129 rm -rf $(SRCSDIR)/$(1)-build
[877cc6a]130endef
131
[1f81129]132define remove_build_dirs2
133 @ROOT=`head -n1 $(SRC)/$(PKG_LST) | sed 's@^./@@;s@/.*@@'` && \
134 rm -rf $(SRC)/$$ROOT && \
135 rm -rf $(SRC)/$(1)-build
[877cc6a]136endef
137
[1f81129]138#==#
139
140define housekeeping
141 @touch $@ && \
142 sleep .25 && \
143 echo -e "\n" $(BOLD)Target $(BLUE)$@ $(WHITE)$(BOLD)OK && \
[dbcdfd7]144 echo --------------------------------------------------------------------------------$(WHITE) && \
145 if [ "$(BREAKPOINT)" = "$@" ] ; then \
146 echo $(tab_)$(RED)The build has been stopped at $(BLUE)$@ $(RED)as requested$(WHITE) ; \
147 false ; \
148 fi
[877cc6a]149endef
150
[1f81129]151#=======================
152
153
154#==== FINAL MESSAGES ===
155
[453bef0]156define echo_report
[7fe73c8]157 echo ; \
158 echo $(BOLD) The report file $(BLUE)$(1)$(BOLD) has been created ; \
159 echo ; \
160 echo $(WHITE)Please send the $(BOLD)$(MOUNT_PT)/jhalfs/$(1)$(WHITE) ; \
161 echo file to $(BOLD)manuel@linuxfromscratch.org$(WHITE) ; \
162 echo ; \
163 echo That will help us to keep more accurate SBU and ; \
164 echo disk usage values into the book. Thanks. ; \
165 echo $(BOLD)--------------------------------------------------------------------------------$(WHITE)
[453bef0]166endef
167
[877cc6a]168define echo_finished
169 @echo $(BOLD)
170 @echo --------------------------------------------------------------------------------
171 @echo $(BOLD) Finished the build of $(BLUE)$(1)$(BOLD)
172 @echo --------------------------------------------------------------------------------
[f4d9a48]173 @echo $(tab_)$(tab_)$(RED)W A R N I N G$(BOLD)
[877cc6a]174 @echo --------------------------------------------------------------------------------
175 @echo
176 @echo To be able to boot your new system you need to follow
177 @echo the next steps:$(WHITE)
178 @echo
[f4d9a48]179 @echo $(tab_)- Enter to the chroot using the command found
180 @echo $(tab_)in the section -Entering the Chroot Environment-
181 @echo $(tab_)except if building CLFS with METHOD=boot.
[877cc6a]182 @echo
[f4d9a48]183 @echo $(tab_)- Set a password for the root user.
[877cc6a]184 @echo
[f4d9a48]185 @echo $(tab_)- Edit or create /etc/fstab, /etc/hosts, /etc/sysconfig/clock,
186 @echo $(tab_)/etc/sysconfig/console, /etc/sysconfig/network,
187 @echo $(tab_)/etc/sysconfig//network-devices/ifconfig.eth0/ipv4 and
188 @echo $(tab_)any other configuration file required to suit your needs.
[877cc6a]189 @echo
[f4d9a48]190 @echo $(tab_)- Exit from the chroot.
[877cc6a]191 @echo
[f4d9a48]192 @echo $(tab_)- Set-up the boot loader, except if building CLFS with METHOD=boot.
193 @echo $(tab_)You can set-up the host bootloader or the new boot-loader
194 @echo $(tab_)installed on the new system.
195 @echo $(tab_)If the last, you must to mount the virtual filesystems, re-enter
196 @echo $(tab_)the chroot and be sure that /dev is populated with the
197 @echo $(tab_)required devices before configure the boot-loader. When ready,
198 @echo $(tab_)exit from the chroot and umount the filesystems
[877cc6a]199 @echo
200 @echo If you are an experienced LFS user, several of those steps can be
201 @echo skipped or done in a different way. But then, that is something
202 @echo that you already know and there is no need to discuss it here.
203 @echo $(BOLD)
204 @echo --------------------------------------------------------------------------------
[f4d9a48]205 @echo $(tab_)$(tab_)$(GREEN)Have a nice day $(ORANGE):-\)$(BOLD)
[877cc6a]206 @echo --------------------------------------------------------------------------------$(WHITE)
207endef
208
209define echo_boot_finished
210 @echo $(BOLD)
211 @echo --------------------------------------------------------------------------------
212 @echo $(BOLD) Finished building a minimal boot system for $(BLUE)$(1)$(BOLD)
213 @echo --------------------------------------------------------------------------------
[f4d9a48]214 @echo $(tab_)$(tab_)$(RED)W A R N I N G$(BOLD)
[877cc6a]215 @echo --------------------------------------------------------------------------------
216 @echo
217 @echo The build is not complete. Follow the next steps:$(WHITE)
218 @echo
[f4d9a48]219 @echo $(tab_)- Edit or create $(MOUNT_PT)/etc/fstab
220 @echo $(tab_) and any other configuration file required to suit your needs.
[877cc6a]221 @echo $(BOLD)
222 @echo $(BOLD)$(YELLOW)
223 @echo 1.If it is necessary, transfer the newly created partition to the target machine
224 @echo 2.Boot the new partition.
225 @echo 3.Once you are logged in issue the following commands
[d981bde]226 @echo $(tab_) $(BOLD)cd /jhalfs
[f4d9a48]227 @echo $(tab_) $(BOLD)make makesys
[877cc6a]228 @echo The build process should resume. Follow any instructions that appear.
229 @echo --------------------------------------------------------------------------------
[f4d9a48]230 @echo $(tab_)$(tab_)$(GREEN)Have a nice day $(ORANGE):-\)$(BOLD)
[877cc6a]231 @echo --------------------------------------------------------------------------------$(WHITE)
232endef
Note: See TracBrowser for help on using the repository browser.