Context Navigation

source: contrib/jhalfs-paco.patch@ 73c3c1c

2.3 2.3.x 2.4 ablfs ablfs-more legacy new_features trunk

Last change on this file since 73c3c1c was d9daa95, checked in by Manuel Canales Esparcia <manuel@…>, 18 years ago
Rediffied paco patch.
Property mode set to `100644`
File size: 32.8 KB

Rev	Line
[059822c]	1	Index: LFS/master.sh
	2	===================================================================
[d9daa95]	3	--- LFS/master.sh (revision 2916)
[059822c]	4	+++ LFS/master.sh (working copy)
[9b09518]	5	@@ -173,6 +173,11 @@
[8230977]	6	# Keep the script file name
	7	this_script=`basename $file`
	8
	9	+ # If $this_script corresponds to a paco script, then skip it
	10	+ case "${this_script}" in
	11	+ *paco) continue ;;
	12	+ esac
	13	+
	14	# We'll run the chroot commands differently than the others, so skip them in the
	15	# dependencies and target creation.
	16	case "${this_script}" in
[9b09518]	17	@@ -180,6 +185,18 @@
[6821737]	18	stripping) [[ "${STRIP}" = "0" ]] && continue ;;
	19	esac
	20
[4795dfb]	21	+ # Install paco as the first package in ch6, before installing
	22	+ # linux-libc-headers, except in iterartive builds
	23	+ if [[ -z "$N" ]]; then
	24	+ case $this_script in
	25	+ *linux-libc-headers)
[799b0d1]	26	+ TMP_SCRIPT="$this_script"
	27	+ this_script=`echo $this_script \| sed -e 's/linux-libc-headers/a-paco/'`
	28	+ wrt_paco_inst "$this_script"
	29	+ this_script="$TMP_SCRIPT" ;;
[4795dfb]	30	+ esac
	31	+ fi
[6821737]	32	+
[4795dfb]	33	# Grab the name of the target
	34	name=`echo ${this_script} \| sed -e 's@[0-9]\{3\}-@@'`
	35
[9b09518]	36	@@ -232,7 +249,9 @@
[059822c]	37	# and not to use chroot.
	38	case "${this_script}" in
[daa9b6c]	39	*kernfs) wrt_RunAsRoot "${this_script}" "$file" ;;
[059822c]	40	- *) wrt_run_as_chroot1 "${this_script}" "$file" ;;
	41	+ *) wrt_paco_prep
	42	+ wrt_run_as_chroot1 "${this_script}" "$file"
[2b88404]	43	+ wrt_paco_log "$pkg_tarball" ;;
[059822c]	44	esac
	45
	46	# Remove the build directory(ies) except if the package build fails.
[9b09518]	47	@@ -252,6 +271,16 @@
[4795dfb]	48	PREV=${this_script}${N}
	49	# Set system_build envar for iteration targets
	50	system_build=$chapter6
[059822c]	51	+
[6821737]	52	+ # Reinstalling paco after readsjusting the toolchain.
[059822c]	53	+ case "${this_script}" in
[6821737]	54	+ *readjusting)
[799b0d1]	55	+ TMP_SCRIPT="$this_script"
	56	+ this_script=`echo ${this_script} \| sed -e 's/readjusting/x-paco/'`
	57	+ wrt_paco_inst "$this_script"
	58	+ this_script="$TMP_SCRIPT" ;;
[059822c]	59	+ esac
	60	+
	61	done # end for file in chapter06/*
	62	}
	63
[8b7357b]	64	@@ -312,8 +341,15 @@
[b9ec725]	65	else
[059822c]	66	wrt_run_as_chroot2 "$this_script" "$file"
	67	fi
[b9ec725]	68	+ wrt_paco_log "lfs-sysconf"
[059822c]	69	;;
[8b7357b]	70	+ kernel \| bootscripts )
	71	+ wrt_paco_prep
	72	+ wrt_run_as_chroot2 "$this_script" "$file"
	73	+ wrt_paco_log "$pkg_tarball"
[059822c]	74	+ ;;
	75	*) wrt_run_as_chroot2 "$this_script" "$file"
[b9ec725]	76	+ wrt_paco_log "lfs-sysconf"
[059822c]	77	;;
	78	esac
[b9ec725]	79
[059822c]	80	Index: LFS/lfs.xsl
	81	===================================================================
[d9daa95]	82	--- LFS/lfs.xsl (revision 2916)
[059822c]	83	+++ LFS/lfs.xsl (working copy)
[963fdae]	84	@@ -39,6 +39,9 @@
[059822c]	85	<!-- Locale settings -->
[c665386]	86	<xsl:param name="lang" select="C"/>
[059822c]	87
	88	+ <!-- Use paco? -->
	89	+ <xsl:param name="use_paco" select="1"/>
	90	+
	91	<xsl:template match="/">
	92	<xsl:apply-templates select="//sect1"/>
	93	</xsl:template>
[963fdae]	94	@@ -239,6 +242,33 @@
[059822c]	95	<xsl:apply-templates/>
	96	<xsl:text> \|\| true </xsl:text>
	97	</xsl:when>
	98	+ <!-- paco begin -->
	99	+ <!-- General rule -->
	100	+ <xsl:when test="$use_paco != '0' and
	101	+ ancestor::chapter[@id != 'chapter-temporary-tools'] and
	102	+ contains(string(),'make') and
	103	+ contains(string(),'install')">
	104	+ <xsl:text>export LD_PRELOAD=/usr/lib/libpaco-log.so </xsl:text>
	105	+ <xsl:apply-templates/>
	106	+ <xsl:text> </xsl:text>
	107	+ </xsl:when>
	108	+ <!-- Linux-libc-headers -->
	109	+ <xsl:when test="$use_paco != '0' and
	110	+ ancestor::sect1[@id='ch-system-linux-libc-headers'] and
	111	+ contains(string(),'install ')">
	112	+ <xsl:text>export LD_PRELOAD=/usr/lib/libpaco-log.so </xsl:text>
	113	+ <xsl:apply-templates/>
	114	+ <xsl:text> </xsl:text>
	115	+ </xsl:when>
	116	+ <!-- Unset LD_PRELOAD before second make in Zlib -->
	117	+ <xsl:when test="$use_paco != '0' and
	118	+ ancestor::sect1[@id='ch-system-zlib'] and
	119	+ contains(string(),'make clean')">
	120	+ <xsl:text>unset LD_PRELOAD </xsl:text>
	121	+ <xsl:apply-templates/>
	122	+ <xsl:text> </xsl:text>
	123	+ </xsl:when>
	124	+ <!-- paco end -->
	125	<!-- The rest of commands -->
	126	<xsl:otherwise>
	127	<xsl:apply-templates/>
[8b7357b]	128	Index: CLFS/master.sh
	129	===================================================================
[d9daa95]	130	--- CLFS/master.sh (revision 2916)
[8b7357b]	131	+++ CLFS/master.sh (working copy)
	132	@@ -495,6 +495,11 @@
	133	# Keep the script file name
	134	this_script=`basename $file`
	135
	136	+ # If $this_script corresponds to a paco script, then skip it
	137	+ case "${this_script}" in
	138	+ *paco) continue ;;
	139	+ esac
	140	+
	141	# Test if the stripping phase must be skipped.
	142	# Skip alsp temp-perl for iterative runs
	143	case $this_script in
	144	@@ -502,6 +507,18 @@
	145	temp-perl) [[ -n "$N" ]] && continue ;;
	146	esac
	147
	148	+ # Install paco as the first package in ch6, before installing
	149	+ # linux-libc-headers, except in iterartive builds
	150	+ if [[ -z "$N" ]]; then
	151	+ case $this_script in
	152	+ *linux-headers)
	153	+ TMP_SCRIPT="$this_script"
	154	+ this_script=`echo $this_script \| sed -e 's/linux-headers/a-paco/'`
	155	+ wrt_paco_inst "$this_script"
	156	+ this_script="$TMP_SCRIPT" ;;
	157	+ esac
	158	+ fi
	159	+
	160	# Grab the name of the target, strip id number, XXX-script
	161	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
	162	-e 's@temp-@@' \
	163	@@ -554,7 +571,9 @@
	164	[[ "$OPTIMIZE" != "0" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
	165	fi
	166	#
	167	+ wrt_paco_prep
	168	wrt_run_as_chroot1 "${this_script}" "${file}"
	169	+ wrt_paco_log "$pkg_tarball"
	170	#
	171	[[ "$pkg_tarball" != "" ]] && wrt_remove_build_dirs "${name}"
	172	#
	173	@@ -569,6 +588,16 @@
	174	PREV=${this_script}${N}
	175	# Set system_build envar for iteration targets
	176	system_build=$basicsystem
	177	+
	178	+ # Reinstalling paco after readsjusting the toolchain.
	179	+ case "${this_script}" in
	180	+ *adjusting)
	181	+ TMP_SCRIPT="$this_script"
	182	+ this_script=`echo ${this_script} \| sed -e 's/adjusting/x-paco/'`
	183	+ wrt_paco_inst "$this_script"
	184	+ this_script="$TMP_SCRIPT" ;;
	185	+ esac
	186	+
	187	done # for file in final-system/* ...
	188	}
	189
	190	@@ -605,6 +634,11 @@
	191	# Keep the script file name
	192	this_script=`basename $file`
	193
	194	+ # If $this_script corresponds to a paco script, then skip it
	195	+ case "${this_script}" in
	196	+ *paco) continue ;;
	197	+ esac
	198	+
	199	# Test if the stripping phase must be skipped
	200	# Skip alsp temp-perl for iterative runs
	201	case $this_script in
	202	@@ -612,6 +646,18 @@
	203	temp-perl) [[ -n "$N" ]] && continue ;;
	204	esac
	205
	206	+ # Install paco as the first package in ch6, before installing
	207	+ # linux-libc-headers, except in iterartive builds
	208	+ if [[ -z "$N" ]]; then
	209	+ case $this_script in
	210	+ *linux-headers)
	211	+ TMP_SCRIPT="$this_script"
	212	+ this_script=`echo $this_script \| sed -e 's/linux-headers/a-paco/'`
	213	+ wrt_paco_inst "$this_script"
	214	+ this_script="$TMP_SCRIPT" ;;
	215	+ esac
	216	+ fi
	217	+
	218	# Grab the name of the target, strip id number, XXX-script
	219	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
	220	-e 's@temp-@@' \
	221	@@ -666,7 +712,9 @@
	222	[[ "$OPTIMIZE" != "0" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
	223	fi
	224	#
	225	+ wrt_paco_prep
	226	wrt_run_as_root2 "${this_script}" "${file}"
	227	+ wrt_paco_log "$pkg_tarball"
	228	#
	229	[[ "$pkg_tarball" != "" ]] && wrt_remove_build_dirs2 "${name}"
	230	#
	231	@@ -681,6 +729,16 @@
	232	PREV=${this_script}${N}
	233	# Set system_build envar for iteration targets
	234	system_build=$basicsystem
	235	+
	236	+ # Reinstalling paco after readsjusting the toolchain.
	237	+ case "${this_script}" in
	238	+ *adjusting)
	239	+ TMP_SCRIPT="$this_script"
	240	+ this_script=`echo ${this_script} \| sed -e 's/adjusting/x-paco/'`
	241	+ wrt_paco_inst "$this_script"
	242	+ this_script="$TMP_SCRIPT" ;;
	243	+ esac
	244	+
	245	done # for file in final-system/* ...
	246	}
	247
	248	@@ -729,7 +787,17 @@
	249	#
	250	[[ "$pkg_tarball" != "" ]] && wrt_unpack2 "$pkg_tarball"
	251	#
	252	+ case $this_script in
	253	+ bootscripts \| *udev-rules )
	254	+ wrt_paco_prep ;;
	255	+ esac
	256	wrt_run_as_chroot1 "${this_script}" "${file}"
	257	+ case $this_script in
	258	+ bootscripts \| *udev-rules )
	259	+ wrt_paco_log "$pkg_tarball" ;;
	260	+ *)
	261	+ wrt_paco_log "clfs-sysconf" ;;
	262	+ esac
	263	#
	264	[[ "$pkg_tarball" != "" ]] && wrt_remove_build_dirs "${name}"
	265	#
	266	@@ -791,7 +859,17 @@
	267	#
	268	[[ "$pkg_tarball" != "" ]] && wrt_unpack3 "$pkg_tarball"
	269	#
	270	+ case $this_script in
	271	+ bootscripts \| *udev-rules )
	272	+ wrt_paco_prep ;;
	273	+ esac
	274	wrt_run_as_root2 "${this_script}" "${file}"
	275	+ case $this_script in
	276	+ bootscripts \| *udev-rules )
	277	+ wrt_paco_log "$pkg_tarball" ;;
	278	+ *)
	279	+ wrt_paco_log "clfs-sysconf" ;;
	280	+ esac
	281	#
	282	[[ "$pkg_tarball" != "" ]] && wrt_remove_build_dirs2 "${name}"
	283	#
	284	@@ -863,8 +941,13 @@
	285	else
	286	wrt_run_as_chroot1 "${this_script}" "${file}"
	287	fi
	288	+ wrt_paco_log "clfs-sysconf"
	289	;;
	290	- *) wrt_run_as_chroot1 "${this_script}" "${file}" ;;
	291	+ *kernel) wrt_paco_prep
	292	+ wrt_run_as_chroot1 "${this_script}" "${file}"
	293	+ wrt_paco_log "$pkg_tarball" ;;
	294	+ *) wrt_run_as_chroot1 "${this_script}" "${file}"
	295	+ wrt_paco_log "clfs-sysconf" ;;
	296	esac
	297	#
	298	# Housekeeping...remove any build directory(ies) except if the package build fails.
	299	@@ -942,8 +1025,13 @@
	300	else
	301	wrt_run_as_root2 "${this_script}" "${file}"
	302	fi
	303	+ wrt_paco_log "clfs-sysconf"
	304	;;
	305	- *) wrt_run_as_root2 "${this_script}" "${file}" ;;
	306	+ *kernel) wrt_paco_prep
	307	+ wrt_run_as_root2 "${this_script}" "${file}"
	308	+ wrt_paco_log "$pkg_tarball" ;;
	309	+ *) wrt_run_as_root2 "${this_script}" "${file}"
	310	+ wrt_paco_log "clfs-sysconf" ;;
	311	esac
	312	#
	313	# Housekeeping...remove any build directory(ies) except if the package build fails.
	314	Index: CLFS/clfs.xsl
	315	===================================================================
[d9daa95]	316	--- CLFS/clfs.xsl (revision 2916)
[8b7357b]	317	+++ CLFS/clfs.xsl (working copy)
[963fdae]	318	@@ -45,6 +45,9 @@
[8b7357b]	319	<!-- Locale settings -->
	320	<xsl:param name="lang" select="C"/>
	321
	322	+ <!-- Use paco? -->
	323	+ <xsl:param name="use_paco" select="1"/>
	324	+
	325	<xsl:template match="/">
	326	<xsl:apply-templates select="//sect1"/>
	327	</xsl:template>
[963fdae]	328	@@ -106,6 +109,25 @@
[8b7357b]	329	<xsl:text>tar -xvf ../vim-&vim-version;-lang.* --strip-components=1 </xsl:text>
	330	</xsl:if>
	331	</xsl:if>
	332	+ <!-- paco begin -->
	333	+ <!-- General rule -->
	334	+ <xsl:if test="$use_paco != '0' and
	335	+ @id='ch-scripts-bootscripts' or
	336	+ @id='ch-scripts-udev-rules' or
	337	+ @id='ch-bootable-kernel' or
	338	+ (../@id='chapter-building-system' and
	339	+ @id!='ch-system-temp-perl' and
	340	+ contains(string(),'make') and
	341	+ contains(string(),'install'))">
	342	+ <xsl:text>export LD_PRELOAD=/usr/lib/libpaco-log.so </xsl:text>
	343	+ </xsl:if>
	344	+ <!-- Linux headers -->
	345	+ <xsl:if test="$use_paco != '0' and
	346	+ @id='ch-system-linux-headers' and
	347	+ contains(string(),'install')">
	348	+ <xsl:text>export LD_PRELOAD=/usr/lib/libpaco-log.so </xsl:text>
	349	+ </xsl:if>
	350	+ <!-- paco end -->
	351	<xsl:apply-templates select=".//para/userinput \| .//screen"/>
	352	<xsl:text>exit</xsl:text>
	353	</exsl:document>
[799b0d1]	354	Index: common/paco-build-hlfs.sh
	355	===================================================================
	356	--- common/paco-build-hlfs.sh (revision 0)
	357	+++ common/paco-build-hlfs.sh (revision 0)
[b9ec725]	358	@@ -0,0 +1,12 @@
[799b0d1]	359	+#!/bin/sh
	360	+set -e
	361	+
	362	+cd $PKGDIR
[b9ec725]	363	+./configure --sysconfdir=/etc \
	364	+ --enable-scripts \
[799b0d1]	365	+ --disable-gpaco \
[b9ec725]	366	+ --disable-static \
	367	+ --with-pic &&
[799b0d1]	368	+make &&
	369	+make install &&
	370	+make logme
[059822c]	371	Index: common/config
	372	===================================================================
[d9daa95]	373	--- common/config (revision 2916)
[059822c]	374	+++ common/config (working copy)
[963fdae]	375	@@ -91,6 +91,23 @@
[4795dfb]	376	#--- Run farce testing 0(no)/1(yes)
	377	RUN_FARCE=0
[d748b31]	378
[059822c]	379	+#==== PACO VARIABLES ====
[4795dfb]	380	+#--- Use paco? 0(no)/1(yes)
[059822c]	381	+USE_PACO=1
[9b09518]	382	+PACO_VERSION=1.10.10
[059822c]	383	+
	384	+#--- Name of the Paco source package
[8715be1]	385	+PACO_FILE=paco-$PACO_VERSION.tar.bz2 # (use .tar.gz if preferred)
	386	+
	387	+#--- Sourceforge mirror to use for Paco source download
	388	+# Europe: heanet, belnet, puzzle, surfnet, switch, kent
	389	+# North America: superb-east, superb-west, umn, easynews
	390	+# South America: ufpr
	391	+# Asia: nchc, jaist
	392	+# Australia: optusnet
	393	+PACO_MIRROR1=heanet
	394	+PACO_MIRROR2=kent
[059822c]	395	+
[4795dfb]	396	#==== INTERNAL VARIABLES ====
	397	# Don't edit it unless you know what you are doing
	398
[963fdae]	399	@@ -108,3 +125,9 @@
[4795dfb]	400
	401	#--- farce report log directory
	402	FARCELOGDIR=$LOGDIR/farce
	403	+
	404	+#--- Variables needed by paco
[059822c]	405	+PACO_INCLUDE=/
[41dfd7c]	406	+PACO_EXCLUDE=/${SCRIPT_ROOT}
[059822c]	407	+PACO_TMPFILE=/tmp/paco.tmp
	408	+LD_PRELOAD=/usr/lib/libpaco-log.so
	409	Index: common/func_validate_configs.sh
	410	===================================================================
[d9daa95]	411	--- common/func_validate_configs.sh (revision 2916)
[059822c]	412	+++ common/func_validate_configs.sh (working copy)
[9b09518]	413	@@ -86,10 +86,10 @@
[059822c]	414	inline_doc
	415
	416	# First internal variables, then the ones that change the book's flavour, and lastly system configuration variables
[daa9b6c]	417	- local -r hlfs_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE GETPKG RUNMAKE MODEL GRSECURITY_HOST TEST BOMB_TEST OPTIMIZE REPORT COMPARE RUN_ICA RUN_FARCE ITERATIONS STRIP FSTAB CONFIG GETKERNEL KEYMAP PAGE TIMEZONE LANG LC_ALL LUSER LGROUP"
	418	- local -r clfs_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE GETPKG RUNMAKE METHOD ARCH TARGET TEST BOMB_TEST OPTIMIZE REPORT COMPARE RUN_ICA RUN_FARCE ITERATIONS STRIP FSTAB BOOT_CONFIG CONFIG GETKERNEL KEYMAP VIMLANG PAGE TIMEZONE LANG LUSER LGROUP"
	419	- local -r clfs2_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE GETPKG RUNMAKE ARCH TARGET OPTIMIZE REPORT STRIP FSTAB CONFIG GETKERNEL KEYMAP VIMLANG PAGE TIMEZONE LANG LUSER LGROUP"
	420	- local -r lfs_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE GETPKG RUNMAKE TEST BOMB_TEST OPTIMIZE REPORT COMPARE RUN_ICA RUN_FARCE ITERATIONS STRIP FSTAB CONFIG GETKERNEL VIMLANG PAGE TIMEZONE LANG LUSER LGROUP"
	421	+ local -r hlfs_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE USE_PACO GETPKG RUNMAKE MODEL GRSECURITY_HOST TEST BOMB_TEST OPTIMIZE REPORT COMPARE RUN_ICA RUN_FARCE ITERATIONS STRIP FSTAB CONFIG GETKERNEL KEYMAP PAGE TIMEZONE LANG LC_ALL LUSER LGROUP"
	422	+ local -r clfs_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE USE_PACO GETPKG RUNMAKE METHOD ARCH TARGET TEST BOMB_TEST OPTIMIZE REPORT COMPARE RUN_ICA RUN_FARCE ITERATIONS STRIP FSTAB BOOT_CONFIG CONFIG GETKERNEL KEYMAP VIMLANG PAGE TIMEZONE LANG LUSER LGROUP"
	423	+ local -r clfs2_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE GETPKG RUNMAKE ARCH TARGET OPTIMIZE REPORT STRIP FSTAB CONFIG GETKERNEL KEYMAP VIMLANG PAGE TIMEZONE LANG LUSER LGROUP"
	424	+ local -r lfs_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE USE_PACO GETPKG RUNMAKE TEST BOMB_TEST OPTIMIZE REPORT COMPARE RUN_ICA RUN_FARCE ITERATIONS STRIP FSTAB CONFIG GETKERNEL VIMLANG PAGE TIMEZONE LANG LUSER LGROUP"
[059822c]	425
	426	local -r ERROR_MSG_pt1='The variable \"${L_arrow}${config_param}${R_arrow}\" value ${L_arrow}${BOLD}${!config_param}${R_arrow} is invalid,'
	427	local -r ERROR_MSG_pt2=' check the config file ${BOLD}${GREEN}\<$(echo $PROGNAME \| tr [a-z] [A-Z])/config\> or \<common/config\>${OFF}'
[9b09518]	428	@@ -179,6 +179,7 @@
[f358747]	429	[[ "$GETPKG" = "1" ]] && validate_against_str "x0x x1x"
	430	fi ;;
[4795dfb]	431	RUNMAKE) validate_against_str "x0x x1x" ;;
	432	+ USE_PACO) validate_against_str "x0x x1x" ;;
	433	REPORT) validate_against_str "x0x x1x"
	434	if [[ "${!config_param}" = "1" ]]; then
	435	if [[ `type -p bc` ]]; then
[059822c]	436	Index: common/paco-functions
	437	===================================================================
	438	--- common/paco-functions (revision 0)
	439	+++ common/paco-functions (revision 0)
[8b7357b]	440	@@ -0,0 +1,311 @@
[059822c]	441	+#!/bin/bash
	442	+
	443	+#----------------------------#
	444	+wrt_paco_inst() { #
	445	+#----------------------------#
[d748b31]	446	+
[8b7357b]	447	+local paco_script="$1"
	448	+
	449	+check_build_model
[d748b31]	450	+
	451	+if [ $USE_PACO != 0 ]; then
[8b7357b]	452	+ case $PROGNAME in
	453	+ clfs )
	454	+ paco_file="final-system/$paco_script"
	455	+ basicsystem="$basicsystem $paco_script" ;;
	456	+ * )
	457	+ paco_file="chapter06/$paco_script"
	458	+ chapter6="$chapter6 $paco_script" ;;
	459	+ esac
[6821737]	460	+
	461	+ # Copy the paco build script to the correct directory and make it executable
[799b0d1]	462	+ cp $JHALFSDIR/paco-build-$PROGNAME.sh $JHALFSDIR/${PROGNAME}-commands/$paco_file &&
[6821737]	463	+ chmod +x $JHALFSDIR/${PROGNAME}-commands/$paco_file
[059822c]	464	+
	465	+ # Write target, dependency and unpack
[8b7357b]	466	+ if [ $CLFS_BOOT = 1 ]; then
	467	+ wrt_target_boot "$paco_script" "$PREV"
	468	+ wrt_unpack3 "$PACO_FILE"
	469	+ wrt_run_as_root2 "${paco_script}" "${paco_file}"
	470	+ wrt_remove_build_dirs2 "paco"
	471	+ else
	472	+ wrt_target "$paco_script" "$PREV"
	473	+ wrt_unpack2 "$PACO_FILE"
	474	+ wrt_run_as_chroot1 "${paco_script}" "${paco_file}"
	475	+ wrt_remove_build_dirs "paco"
	476	+ fi
[059822c]	477	+
[2b88404]	478	+ wrt_touch
[059822c]	479	+
	480	+ # Override the PREV variable
[6821737]	481	+ PREV="$paco_script"
[059822c]	482	+fi
	483	+}
	484	+
	485	+
	486	+#----------------------------------#
	487	+wrt_paco_prep() { # Export Paco variables
	488	+#----------------------------------# and remove tmpfile
[d748b31]	489	+
[8b7357b]	490	+local TMPFILEPATH
	491	+
	492	+check_build_model
[d748b31]	493	+
[b9ec725]	494	+check_log_package
	495	+
	496	+if [ $USE_PACO != 0 ] && [ $LOG_PACKAGE != 0 ]; then
[8b7357b]	497	+ if [ $CLFS_BOOT = 1 ]; then
	498	+ TMPFILEPATH="$PACO_TMPFILE"
	499	+ else
	500	+ TMPFILEPATH="\$(MOUNT_PT)$PACO_TMPFILE"
	501	+ fi
[059822c]	502	+(
	503	+cat << EOF
	504	+ @echo "export PACO_INCLUDE=$PACO_INCLUDE" >> envars && \\
[b9ec725]	505	+ echo "export PACO_EXCLUDE=\$(SRC):$PACO_EXCLUDE" >> envars && \\
[059822c]	506	+ echo "export PACO_TMPFILE=$PACO_TMPFILE" >> envars && \\
[8b7357b]	507	+ rm -f $TMPFILEPATH
[059822c]	508	+EOF
	509	+) >> $MKFILE.tmp
	510	+fi
	511	+}
	512	+
	513	+
	514	+#----------------------------------#
	515	+wrt_paco_log() { # If the tmpfile exist, then log the current package
	516	+#----------------------------------# and remove tempfile
[d748b31]	517	+local PACKAGE
	518	+
[8b7357b]	519	+# Extract package name and version from the tarball name
[2b88404]	520	+PACKAGE=`echo $1 \| sed -e 's/.tar.*//'`
[059822c]	521	+
[8b7357b]	522	+check_build_model
[059822c]	523	+
[8b7357b]	524	+# Check if the package should be logged
[b9ec725]	525	+check_log_package
	526	+
[8b7357b]	527	+
[b9ec725]	528	+if [ $USE_PACO != 0 ]; then
	529	+ if [ $LOG_PACKAGE != 0 ]; then
[8b7357b]	530	+ # Only use this if doing CLFS boot build
	531	+ if [ $CLFS_BOOT = 1 ]; then
	532	+(
	533	+cat << EOF
	534	+ @if [ -e $PACO_TMPFILE ]; then \\
	535	+ paco -lp+ $PACKAGE < $PACO_TMPFILE && \\
	536	+ rm -f $PACO_TMPFILE; \\
	537	+ fi;
	538	+EOF
	539	+) >> $MKFILE.tmp
	540	+ # All else should use these commands
	541	+ else
[059822c]	542	+(
	543	+cat << EOF
	544	+ @if [ -e \$(MOUNT_PT)$PACO_TMPFILE ]; then \\
[4795dfb]	545	+ \$(CHROOT1) 'paco -lp+ $PACKAGE < $PACO_TMPFILE' && \\
[059822c]	546	+ rm -f \$(MOUNT_PT)$PACO_TMPFILE; \\
	547	+ fi;
	548	+EOF
	549	+) >> $MKFILE.tmp
[8b7357b]	550	+ fi
[b9ec725]	551	+ fi
[8b7357b]	552	+ # Add missing files to the logs if needed
[b9ec725]	553	+ wrt_paco_add_log
[059822c]	554	+fi
[b9ec725]	555	+}
[059822c]	556	+
[b9ec725]	557	+
	558	+#----------------------------------#
[8b7357b]	559	+fnc_add_log() { #
	560	+#----------------------------------#
	561	+
	562	+MISSING_FILE=$1
	563	+
	564	+if [ $CLFS_BOOT = 1 ]; then
	565	+ echo -e "\t@$MISSING_FILE \| paco -lp+ $PACKAGE" >> $MKFILE.tmp
	566	+else
	567	+ echo -e "\t@\$(CHROOT1) '$MISSING_FILE \| paco -lp+ $PACKAGE'" >> $MKFILE.tmp
	568	+fi
	569	+}
	570	+
	571	+
	572	+#----------------------------------#
[b9ec725]	573	+wrt_paco_add_log() { #
	574	+#----------------------------------#
	575	+# Some packages create files using bash redirection, which the LD_PRELOAD lib don't notice
	576	+# These rules will add the missing files to the proper logs.
	577	+# Most of these is not needed for HLFS, but they do no harm.
	578	+if [ $USE_PACO != 0 ]; then
[8b7357b]	579	+ case $this_script in
[b9ec725]	580	+ *glibc)
[8b7357b]	581	+ fnc_add_log "find /lib -type l"
	582	+ fnc_add_log "find /etc/{nsswitch.conf,ld.so.conf}"
[b9ec725]	583	+ ;;
	584	+ *ncurses)
[8b7357b]	585	+ fnc_add_log "find /usr/lib/{libcurses.so,libncurses.so,libform.so,libpanel.so,libmenu.so}"
[b9ec725]	586	+ ;;
	587	+ *bash)
[8b7357b]	588	+ fnc_add_log "echo /bin/sh"
[b9ec725]	589	+ ;;
	590	+ *flex)
[8b7357b]	591	+ fnc_add_log "echo /usr/bin/lex"
[b9ec725]	592	+ ;;
	593	+ *shadow)
[8b7357b]	594	+ fnc_add_log "echo /etc/login.defs"
[b9ec725]	595	+ ;;
	596	+ *hotplug)
[8b7357b]	597	+ fnc_add_log "echo /var/log/hotplug"
	598	+ fnc_add_log "echo /var/run/usb"
[b9ec725]	599	+ ;;
	600	+ *sysklogd)
[8b7357b]	601	+ fnc_add_log "echo /etc/syslog.conf"
[b9ec725]	602	+ ;;
	603	+ *sysvinit)
[8b7357b]	604	+ fnc_add_log "echo /etc/inittab"
[b9ec725]	605	+ ;;
	606	+ *udev)
[8b7357b]	607	+ fnc_add_log "find /lib/udev/devices"
	608	+ fnc_add_log "echo /lib/firmware"
	609	+ fnc_add_log "find /etc/udev/rules.d -type f"
[b9ec725]	610	+ ;;
	611	+ *util-linux)
[8b7357b]	612	+ fnc_add_log "echo /var/lib/hwclock"
	613	+ fnc_add_log "echo /etc/nologin.txt"
[b9ec725]	614	+ ;;
	615	+ *vim)
[8b7357b]	616	+ fnc_add_log "echo /etc/vimrc"
[b9ec725]	617	+ ;;
[8b7357b]	618	+ # Rules below here will log configuration files created in {C,H}LFS
	619	+ # They will end up in a log named {c,h}lfs-sysconf
[b9ec725]	620	+ *setclock)
[8b7357b]	621	+ fnc_add_log "echo /etc/sysconfig/clock"
[b9ec725]	622	+ ;;
	623	+ *inputrc)
[8b7357b]	624	+ fnc_add_log "echo /etc/inputrc"
[b9ec725]	625	+ ;;
	626	+ *profile)
[8b7357b]	627	+ fnc_add_log "echo /etc/profile"
[b9ec725]	628	+ ;;
	629	+ *hostname)
[8b7357b]	630	+ fnc_add_log "echo /etc/sysconfig/network"
[b9ec725]	631	+ ;;
	632	+ *localnet)
[8b7357b]	633	+ fnc_add_log "echo /etc/sysconfig/network"
[b9ec725]	634	+ ;;
	635	+ *hosts)
[8b7357b]	636	+ fnc_add_log "echo /etc/hosts"
[b9ec725]	637	+ ;;
	638	+ *network)
[8b7357b]	639	+ fnc_add_log "echo /etc/sysconfig/network-devices/ifconfig.eth0/ipv4"
	640	+ fnc_add_log "echo /etc/resolv.conf"
[b9ec725]	641	+ ;;
	642	+ *fstab)
[8b7357b]	643	+ fnc_add_log "echo /etc/fstab"
[b9ec725]	644	+ ;;
[8b7357b]	645	+ *theend) # LFS and CLFS
	646	+ fnc_add_log "echo /etc/$PROGNAME-release"
[b9ec725]	647	+ ;;
	648	+ *finished) # HLFS
[8b7357b]	649	+ fnc_add_log "echo /etc/$PROGNAME-release"
[b9ec725]	650	+ ;;
	651	+ esac
[059822c]	652	+fi
	653	+}
[b9ec725]	654	+
	655	+
	656	+#----------------------------------#
	657	+check_log_package() { #
	658	+#----------------------------------#
	659	+# Maybe don't need this function, but it will avoid writing some
	660	+# unnecessary paco commands in the Makefile.
	661	+
	662	+case $this_script in
[2b88404]	663	+ *changingowner) LOG_PACKAGE=0 ;;
[b9ec725]	664	+ *creatingdirs) LOG_PACKAGE=0 ;;
	665	+ *createfiles) LOG_PACKAGE=0 ;;
[2b88404]	666	+ *pwdgroup) LOG_PACKAGE=0 ;;
	667	+ *devices) LOG_PACKAGE=0 ;;
[8b7357b]	668	+ *stripping) LOG_PACKAGE=0 ;;
[b9ec725]	669	+ *strippingagain) LOG_PACKAGE=0 ;;
[8b7357b]	670	+ *adjusting) LOG_PACKAGE=0 ;;
	671	+ *temp-perl) LOG_PACKAGE=0 ;;
[b9ec725]	672	+ *readjusting) LOG_PACKAGE=0 ;;
	673	+ *setclock) LOG_PACKAGE=0 ;;
	674	+ *inputrc) LOG_PACKAGE=0 ;;
	675	+ *profile) LOG_PACKAGE=0 ;;
	676	+ *hostname) LOG_PACKAGE=0 ;;
	677	+ *localnet) LOG_PACKAGE=0 ;;
	678	+ *hosts) LOG_PACKAGE=0 ;;
	679	+ *network) LOG_PACKAGE=0 ;;
	680	+ *fstab) LOG_PACKAGE=0 ;;
	681	+ *theend) LOG_PACKAGE=0 ;;
	682	+ *finished) LOG_PACKAGE=0 ;;
	683	+ *) LOG_PACKAGE=1 ;;
	684	+esac
	685	+}
[8715be1]	686	+
	687	+#----------------------------------#
	688	+get_paco_src() { #
	689	+#----------------------------------#
	690	+# Download the paco sources
	691	+# We don't do any MD5SUM checking as of yet
	692	+# http://jaist.dl.sourceforge.net/sourceforge/paco/paco-1.10.10.tar.bz2
	693	+
	694	+local PACO_URL1="http://$PACO_MIRROR1.dl.sourceforge.net/sourceforge/paco/$PACO_FILE"
	695	+local PACO_URL2="http://$PACO_MIRROR2.dl.sourceforge.net/sourceforge/paco/$PACO_FILE"
	696	+
	697	+# Test if paco is to be used
[8b7357b]	698	+[[ ! "$USE_PACO" = "1" ]] && return
[8715be1]	699	+
	700	+# If the file exists in the archive copy it to the $BUILDDIR/sources dir.
	701	+if [ ! -z ${SRC_ARCHIVE} ] &&
	702	+ [ -d ${SRC_ARCHIVE} ] &&
	703	+ [ -f ${SRC_ARCHIVE}/$PACO_FILE ]; then
	704	+ cp ${SRC_ARCHIVE}/$PACO_FILE .
	705	+ echo "$PACO_FILE: -- copied from $SRC_ARCHIVE"
	706	+ fromARCHIVE=1
	707	+else
	708	+ echo "${BOLD}${YELLOW}$PACO_FILE: not found in ${SRC_ARCHIVE}${OFF}"
	709	+ fromARCHIVE=0
	710	+ # If the file does not exist yet in /sources download a fresh one
	711	+ if [ ! -f $PACO_FILE ] ; then
	712	+ if ! wget $PACO_URL1 && ! wget $PACO_URL2 ; then
	713	+ gs_wrt_message "$PACO_FILE not found in the SRC_ARCHIVE or on any server..SKIPPING"
	714	+ continue
	715	+ fi
	716	+ fi
	717	+fi
	718	+
	719	+# Copy the freshly downloaded file to the source archive.
	720	+if [ ! -z ${SRC_ARCHIVE} ] &&
	721	+ [ -d ${SRC_ARCHIVE} ] &&
	722	+ [ -w ${SRC_ARCHIVE} ] &&
	723	+ [ "$fromARCHIVE" = "0" ] ; then
	724	+ echo "Storing file:<$PACO_FILE> in the package archive"
	725	+ cp -f $PACO_FILE ${SRC_ARCHIVE}
	726	+fi
	727	+}
[8b7357b]	728	+
	729	+
	730	+#----------------------------------#
	731	+check_build_model() { #
	732	+#----------------------------------#
	733	+# Check what script we're running, and set some switches accordingly
	734	+
	735	+CLFS_BOOT=0
	736	+
	737	+case $PROGNAME in
	738	+ hlfs)
	739	+ # Not using Paco with uClibc, even if requested
	740	+ if [ "$MODEL" = "uclibc" ]; then
	741	+ USE_PACO=0
	742	+ fi
	743	+ ;;
	744	+ clfs)
	745	+ # CLFS boot method require it's own commands
	746	+ if [ "$METHOD" = "boot" ]; then
	747	+ CLFS_BOOT=1
	748	+ fi
	749	+ ;;
	750	+esac
	751	+}
[799b0d1]	752	Index: common/paco-build-lfs.sh
[6821737]	753	===================================================================
[799b0d1]	754	--- common/paco-build-lfs.sh (revision 0)
	755	+++ common/paco-build-lfs.sh (revision 0)
[b9ec725]	756	@@ -0,0 +1,10 @@
[6821737]	757	+#!/bin/sh
	758	+set -e
	759	+
	760	+cd $PKGDIR
[b9ec725]	761	+./configure --sysconfdir=/etc \
	762	+ --enable-scripts \
	763	+ --disable-gpaco &&
[6821737]	764	+make &&
	765	+make install &&
	766	+make logme
[8b7357b]	767	Index: common/paco-build-clfs.sh
	768	===================================================================
	769	--- common/paco-build-clfs.sh (revision 0)
	770	+++ common/paco-build-clfs.sh (revision 0)
	771	@@ -0,0 +1,10 @@
	772	+#!/bin/sh
	773	+set -e
	774	+
	775	+cd $PKGDIR
	776	+./configure --sysconfdir=/etc \
	777	+ --enable-scripts \
	778	+ --disable-gpaco &&
	779	+make &&
	780	+make install &&
	781	+make logme
[059822c]	782	Index: common/common-functions
	783	===================================================================
[d9daa95]	784	--- common/common-functions (revision 2916)
[059822c]	785	+++ common/common-functions (working copy)
[a708b15]	786	@@ -69,6 +69,9 @@
[059822c]	787	in the configuration file has the proper packages and patches for the
	788	book version being processed.
	789
	790	+${BOLD} --no-paco${OFF}
	791	+ dissables paco logging feature.
	792	+
[f3ae556]	793	${BOLD} -O, --optimize${OFF}
	794	Optimize [0-2]
	795	0 = no optimization
[daa9b6c]	796	@@ -696,6 +699,7 @@
[8b7357b]	797	--stringparam page $PAGE \
	798	--stringparam lang $LANG \
[d9daa95]	799	--stringparam keymap ${KEYMAP:-"none"} \
[8b7357b]	800	+ --stringparam use_paco $USE_PACO \
	801	-o ./${PROGNAME}-commands/ $XSL $BOOK/$ARCH-index.xml >>$LOGDIR/$LOG 2>&1
	802	;;
	803
[daa9b6c]	804	@@ -723,6 +727,7 @@
[059822c]	805	--stringparam lc_all $LC_ALL \
[d9daa95]	806	--stringparam keymap ${KEYMAP:-"none"} \
[059822c]	807	--stringparam grsecurity_host $GRSECURITY_HOST \
	808	+ --stringparam use_paco $USE_PACO \
	809	-o ./${PROGNAME}-commands/ $XSL $BOOK/index.xml >>$LOGDIR/$LOG 2>&1
	810	;;
	811	lfs)
[daa9b6c]	812	@@ -735,6 +740,7 @@
[059822c]	813	--stringparam timezone $TIMEZONE \
	814	--stringparam page $PAGE \
	815	--stringparam lang $LANG \
	816	+ --stringparam use_paco $USE_PACO \
	817	-o ./${PROGNAME}-commands/ $XSL $BOOK/index.xml >>$LOGDIR/$LOG 2>&1
	818	;;
[8230977]	819	*) exit 1 ;;
[daa9b6c]	820	@@ -801,6 +807,9 @@
[8715be1]	821	# Generate URLs file
	822	create_urls
	823
	824	+ # If Paco is to be used, then download the sources
	825	+ get_paco_src
	826	+
	827	IFS=$'\x0A' # Modify the 'internal field separator' to break on 'LF' only
	828	for line in `cat urls.lst`; do
	829	IFS=$saveIFS # Restore the system defaults
[059822c]	830	Index: HLFS/hlfs.xsl
	831	===================================================================
[d9daa95]	832	--- HLFS/hlfs.xsl (revision 2916)
[059822c]	833	+++ HLFS/hlfs.xsl (working copy)
[963fdae]	834	@@ -46,6 +46,9 @@
[c665386]	835	<xsl:param name="lang" select="C"/>
	836	<xsl:param name="lc_all" select="C"/>
[059822c]	837
	838	+ <!-- Use paco? -->
	839	+ <xsl:param name="use_paco" select="1"/>
	840	+
	841	<xsl:template match="/">
	842	<xsl:apply-templates select="//sect1"/>
	843	</xsl:template>
[963fdae]	844	@@ -192,6 +195,10 @@
[059822c]	845	<!-- Fixing bootscripts installation -->
	846	<xsl:when test="ancestor::sect1[@id='bootable-bootscripts'] and
	847	string() = 'make install'">
	848	+ <!-- inserting LD_PRELOAD before installing bootscripts -->
	849	+ <xsl:if test="$use_paco != '0' and $model != 'uclibc'">
	850	+ <xsl:text>export LD_PRELOAD=/usr/lib/libpaco-log.so </xsl:text>
	851	+ </xsl:if>
	852	<xsl:text>make install </xsl:text>
	853	<xsl:text>cd ../blfs-bootscripts-&blfs-bootscripts-version; </xsl:text>
	854	</xsl:when>
[963fdae]	855	@@ -280,6 +287,25 @@
[059822c]	856	<xsl:apply-templates/>
	857	<xsl:text> \|\| true </xsl:text>
	858	</xsl:when>
	859	+ <!-- paco begin -->
	860	+ <!-- General rule -->
	861	+ <xsl:when test="$use_paco != '0' and $model != 'uclibc' and
	862	+ ancestor::chapter[@id != 'chapter-temporary-tools'] and
	863	+ contains(string(),'make') and
	864	+ contains(string(),'install')">
	865	+ <xsl:text>export LD_PRELOAD=/usr/lib/libpaco-log.so </xsl:text>
[9b09518]	866	+ <xsl:apply-templates/>
[059822c]	867	+ <xsl:text> </xsl:text>
	868	+ </xsl:when>
	869	+ <!-- Linux-libc-headers -->
	870	+ <xsl:when test="$use_paco != '0' and $model != 'uclibc' and
[9b09518]	871	+ ancestor::sect1[@id='ch-system-linux-headers'] and
[059822c]	872	+ contains(string(),'install ')">
	873	+ <xsl:text>export LD_PRELOAD=/usr/lib/libpaco-log.so </xsl:text>
[9b09518]	874	+ <xsl:apply-templates/>
[059822c]	875	+ <xsl:text> </xsl:text>
	876	+ </xsl:when>
	877	+ <!-- paco end -->
	878	<!-- The rest of commands -->
	879	<xsl:otherwise>
	880	<xsl:apply-templates/>
	881	Index: HLFS/master.sh
	882	===================================================================
[d9daa95]	883	--- HLFS/master.sh (revision 2916)
[059822c]	884	+++ HLFS/master.sh (working copy)
[daa9b6c]	885	@@ -40,7 +40,9 @@
[9b09518]	886	EOF
	887	) >> $MKFILE.tmp
[963fdae]	888	[[ "$TEST" != "0" ]] && wrt_test_log2 "${this_script}"
[9b09518]	889	+ wrt_paco_prep
	890	wrt_run_as_chroot1 "$toolchain" "$this_script"
	891	+ wrt_paco_log "`echo $toolchain \| sed -e 's@[0-9]\{3\}-@@'`"
	892	;;
	893
	894	*)
[daa9b6c]	895	@@ -272,6 +274,11 @@
[8230977]	896	# Keep the script file name
	897	this_script=`basename $file`
	898
	899	+ # If this script is *-paco, then skip it
	900	+ case $this_script in
	901	+ *paco ) continue ;;
	902	+ esac
	903	+
	904	# Skip this script depending on jhalfs.conf flags set.
	905	case $this_script in
	906	# We'll run the chroot commands differently than the others, so skip them in the
[daa9b6c]	907	@@ -281,6 +288,18 @@
[4795dfb]	908	-stripping ) [[ "$STRIP" = "0" ]] && continue ;;
[6821737]	909	esac
	910
[4795dfb]	911	+ # Install paco as the first package in ch6, before installing
	912	+ # linux-libc-headers, except in iterartive builds
	913	+ if [[ -z "$N" ]]; then
	914	+ case $this_script in
[9b09518]	915	+ *linux-headers)
[799b0d1]	916	+ TMP_SCRIPT="$this_script"
[9b09518]	917	+ this_script=`echo $this_script \| sed -e 's/linux-headers/a-paco/'`
[799b0d1]	918	+ wrt_paco_inst "$this_script"
	919	+ this_script="$TMP_SCRIPT" ;;
[4795dfb]	920	+ esac
	921	+ fi
[6821737]	922	+
[4795dfb]	923	# Grab the name of the target
	924	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
	925
[daa9b6c]	926	@@ -346,7 +365,9 @@
	927	wrt_RunAsRoot "${this_script}" "${file}"
[059822c]	928	;;
	929	*) # The rest of Chapter06
	930	+ wrt_paco_prep
	931	wrt_run_as_chroot1 "${this_script}" "${file}"
[2b88404]	932	+ wrt_paco_log "$pkg_tarball"
[059822c]	933	;;
	934	esac
	935	#
[daa9b6c]	936	@@ -366,6 +387,16 @@
[4795dfb]	937	PREV=${this_script}${N}
	938	# Set system_build envar for iteration targets
	939	system_build=$chapter6
[059822c]	940	+
[6821737]	941	+ # Reinstall paco after the toolchain has been readjusted.
[059822c]	942	+ case "${this_script}" in
[6821737]	943	+ *readjusting)
[799b0d1]	944	+ TMP_SCRIPT="$this_script"
	945	+ this_script=`echo $this_script \| sed -e 's/readjusting/x-paco/'`
	946	+ wrt_paco_inst "$this_script"
	947	+ this_script="$TMP_SCRIPT" ;;
[059822c]	948	+ esac
	949	+
	950	done # end for file in chapter06/*
	951
	952	}
[daa9b6c]	953	@@ -424,9 +455,19 @@
[b9ec725]	954	else # Initialize the log and run the script
[059822c]	955	wrt_run_as_chroot2 "${this_script}" "${file}"
	956	fi
[b9ec725]	957	+ wrt_paco_log "hlfs-sysconf"
[059822c]	958	;;
	959	+ *kernel) wrt_paco_prep
	960	+ wrt_run_as_chroot2 "$this_script" "$file"
[2b88404]	961	+ wrt_paco_log "$(get_package_tarball_name "linux")"
[059822c]	962	+ ;;
	963	+ *bootscripts) wrt_paco_prep
	964	+ wrt_run_as_chroot2 "$this_script" "$file"
[2b88404]	965	+ wrt_paco_log "$(get_package_tarball_name "lfs-bootscripts")"
[059822c]	966	+ ;;
	967	*) # All other scripts
	968	wrt_run_as_chroot2 "${this_script}" "${file}"
[b9ec725]	969	+ wrt_paco_log "hlfs-sysconf"
[059822c]	970	;;
[b9ec725]	971	esac
	972
[d748b31]	973	Index: master.sh
	974	===================================================================
[d9daa95]	975	--- master.sh (revision 2916)
[d748b31]	976	+++ master.sh (working copy)
[d9daa95]	977	@@ -194,6 +194,8 @@
[d748b31]	978
	979	--help \| -h ) usage \| more && exit ;;
	980
	981	+ --no-paco ) USE_PACO=0 ;;
	982	+
[f3ae556]	983	--optimize \| -O )
[d748b31]	984	test $# = 1 && eval "$exit_missing_arg"
	985	shift
[d9daa95]	986	@@ -489,6 +491,14 @@
[d29584b]	987	[[ $VERBOSITY > 0 ]] && echo "OK"
	988	fi
[f3ae556]	989	#
[d29584b]	990	+# paco module
	991	+if [[ "$USE_PACO" = "1" ]]; then
	992	+ [[ $VERBOSITY > 0 ]] && echo -n "Loading paco module..."
	993	+ source $COMMON_DIR/paco-functions
	994	+ [[ $? > 0 ]] && echo "$COMMON_DIR/paco-functions did not load.." && exit 2
	995	+ [[ $VERBOSITY > 0 ]] && echo "OK"
	996	+fi
	997	+#
[f3ae556]	998	# optimize module
	999	if [[ "$OPTIMIZE" != "0" ]]; then
	1000	[[ $VERBOSITY > 0 ]] && echo -n "Loading optimization module..."
[d9daa95]	1001	@@ -535,6 +545,8 @@
[d748b31]	1002	if [[ "$PWD" != "$JHALFSDIR" ]]; then
[b9ec725]	1003	cp $COMMON_DIR/{makefile-functions,progress_bar.sh} $JHALFSDIR/
[c665386]	1004	#
[8230977]	1005	+ [[ $USE_PACO != "0" ]] && cp $COMMON_DIR/paco-build-$PROGNAME.sh $JHALFSDIR/
	1006	+ #
[f3ae556]	1007	[[ "$OPTIMIZE" != "0" ]] && cp optimize/opt_override $JHALFSDIR/
[c665386]	1008	#
[4795dfb]	1009	if [[ "$COMPARE" != "0" ]] ; then

Note: See TracBrowser for help on using the repository browser.

Download in other formats: