Context Navigation

source: contrib/jhalfs-paco.patch@ a3b0e38

2.3 2.3.x 2.4 ablfs ablfs-more legacy new_features trunk

Last change on this file since a3b0e38 was 7bf2fdd, checked in by Manuel Canales Esparcia <manuel@…>, 18 years ago
PACO patch updates from upstream plus menuconfig support.
Property mode set to `100644`
File size: 34.9 KB

Rev	Line
[059822c]	1	Index: LFS/master.sh
	2	===================================================================
[7bf2fdd]	3	--- LFS/master.sh (revision 3007)
[059822c]	4	+++ LFS/master.sh (working copy)
[7bf2fdd]	5	@@ -172,6 +172,11 @@
[8230977]	6	# Keep the script file name
	7	this_script=`basename $file`
	8
	9	+ # If $this_script corresponds to a paco script, then skip it
	10	+ case "${this_script}" in
	11	+ *paco) continue ;;
	12	+ esac
	13	+
	14	# We'll run the chroot commands differently than the others, so skip them in the
	15	# dependencies and target creation.
	16	case "${this_script}" in
[7bf2fdd]	17	@@ -179,6 +184,18 @@
	18	stripping) [[ "${STRIP}" = "n" ]] && continue ;;
[6821737]	19	esac
	20
[4795dfb]	21	+ # Install paco as the first package in ch6, before installing
	22	+ # linux-libc-headers, except in iterartive builds
	23	+ if [[ -z "$N" ]]; then
	24	+ case $this_script in
	25	+ *linux-libc-headers)
[799b0d1]	26	+ TMP_SCRIPT="$this_script"
	27	+ this_script=`echo $this_script \| sed -e 's/linux-libc-headers/a-paco/'`
	28	+ wrt_paco_inst "$this_script"
	29	+ this_script="$TMP_SCRIPT" ;;
[4795dfb]	30	+ esac
	31	+ fi
[6821737]	32	+
[4795dfb]	33	# Grab the name of the target
	34	name=`echo ${this_script} \| sed -e 's@[0-9]\{3\}-@@'`
	35
[7bf2fdd]	36	@@ -231,7 +248,9 @@
[059822c]	37	# and not to use chroot.
	38	case "${this_script}" in
[daa9b6c]	39	*kernfs) wrt_RunAsRoot "${this_script}" "$file" ;;
[059822c]	40	- *) wrt_run_as_chroot1 "${this_script}" "$file" ;;
	41	+ *) wrt_paco_prep
	42	+ wrt_run_as_chroot1 "${this_script}" "$file"
[2b88404]	43	+ wrt_paco_log "$pkg_tarball" ;;
[059822c]	44	esac
	45
	46	# Remove the build directory(ies) except if the package build fails.
[7bf2fdd]	47	@@ -251,6 +270,16 @@
[4795dfb]	48	PREV=${this_script}${N}
	49	# Set system_build envar for iteration targets
	50	system_build=$chapter6
[059822c]	51	+
[6821737]	52	+ # Reinstalling paco after readsjusting the toolchain.
[059822c]	53	+ case "${this_script}" in
[6821737]	54	+ *readjusting)
[799b0d1]	55	+ TMP_SCRIPT="$this_script"
	56	+ this_script=`echo ${this_script} \| sed -e 's/readjusting/x-paco/'`
	57	+ wrt_paco_inst "$this_script"
	58	+ this_script="$TMP_SCRIPT" ;;
[059822c]	59	+ esac
	60	+
	61	done # end for file in chapter06/*
	62	}
	63
[7bf2fdd]	64	@@ -311,8 +340,15 @@
[b9ec725]	65	else
[059822c]	66	wrt_run_as_chroot2 "$this_script" "$file"
	67	fi
[b9ec725]	68	+ wrt_paco_log "lfs-sysconf"
[059822c]	69	;;
[8b7357b]	70	+ kernel \| bootscripts )
	71	+ wrt_paco_prep
	72	+ wrt_run_as_chroot2 "$this_script" "$file"
	73	+ wrt_paco_log "$pkg_tarball"
[059822c]	74	+ ;;
	75	*) wrt_run_as_chroot2 "$this_script" "$file"
[b9ec725]	76	+ wrt_paco_log "lfs-sysconf"
[059822c]	77	;;
	78	esac
[b9ec725]	79
[059822c]	80	Index: LFS/lfs.xsl
	81	===================================================================
[7bf2fdd]	82	--- LFS/lfs.xsl (revision 3007)
[059822c]	83	+++ LFS/lfs.xsl (working copy)
[963fdae]	84	@@ -39,6 +39,9 @@
[059822c]	85	<!-- Locale settings -->
[c665386]	86	<xsl:param name="lang" select="C"/>
[059822c]	87
	88	+ <!-- Use paco? -->
[7bf2fdd]	89	+ <xsl:param name="use_paco" select="y"/>
[059822c]	90	+
	91	<xsl:template match="/">
	92	<xsl:apply-templates select="//sect1"/>
	93	</xsl:template>
[7bf2fdd]	94	@@ -251,6 +254,33 @@
[059822c]	95	<xsl:apply-templates/>
	96	<xsl:text> \|\| true </xsl:text>
	97	</xsl:when>
	98	+ <!-- paco begin -->
	99	+ <!-- General rule -->
[7bf2fdd]	100	+ <xsl:when test="$use_paco != 'n' and
[059822c]	101	+ ancestor::chapter[@id != 'chapter-temporary-tools'] and
	102	+ contains(string(),'make') and
	103	+ contains(string(),'install')">
	104	+ <xsl:text>export LD_PRELOAD=/usr/lib/libpaco-log.so </xsl:text>
	105	+ <xsl:apply-templates/>
	106	+ <xsl:text> </xsl:text>
	107	+ </xsl:when>
	108	+ <!-- Linux-libc-headers -->
[7bf2fdd]	109	+ <xsl:when test="$use_paco != 'n' and
[059822c]	110	+ ancestor::sect1[@id='ch-system-linux-libc-headers'] and
	111	+ contains(string(),'install ')">
	112	+ <xsl:text>export LD_PRELOAD=/usr/lib/libpaco-log.so </xsl:text>
	113	+ <xsl:apply-templates/>
	114	+ <xsl:text> </xsl:text>
	115	+ </xsl:when>
	116	+ <!-- Unset LD_PRELOAD before second make in Zlib -->
[7bf2fdd]	117	+ <xsl:when test="$use_paco != 'n' and
[059822c]	118	+ ancestor::sect1[@id='ch-system-zlib'] and
	119	+ contains(string(),'make clean')">
	120	+ <xsl:text>unset LD_PRELOAD </xsl:text>
	121	+ <xsl:apply-templates/>
	122	+ <xsl:text> </xsl:text>
	123	+ </xsl:when>
	124	+ <!-- paco end -->
	125	<!-- The rest of commands -->
	126	<xsl:otherwise>
	127	<xsl:apply-templates/>
[8b7357b]	128	Index: CLFS/master.sh
	129	===================================================================
[7bf2fdd]	130	--- CLFS/master.sh (revision 3007)
[8b7357b]	131	+++ CLFS/master.sh (working copy)
[7bf2fdd]	132	@@ -494,6 +494,11 @@
[8b7357b]	133	# Keep the script file name
	134	this_script=`basename $file`
	135
	136	+ # If $this_script corresponds to a paco script, then skip it
	137	+ case "${this_script}" in
	138	+ *paco) continue ;;
	139	+ esac
	140	+
	141	# Test if the stripping phase must be skipped.
	142	# Skip alsp temp-perl for iterative runs
	143	case $this_script in
[7bf2fdd]	144	@@ -501,6 +506,18 @@
[8b7357b]	145	temp-perl) [[ -n "$N" ]] && continue ;;
	146	esac
	147
	148	+ # Install paco as the first package in ch6, before installing
	149	+ # linux-libc-headers, except in iterartive builds
	150	+ if [[ -z "$N" ]]; then
	151	+ case $this_script in
	152	+ *linux-headers)
	153	+ TMP_SCRIPT="$this_script"
	154	+ this_script=`echo $this_script \| sed -e 's/linux-headers/a-paco/'`
	155	+ wrt_paco_inst "$this_script"
	156	+ this_script="$TMP_SCRIPT" ;;
	157	+ esac
	158	+ fi
	159	+
	160	# Grab the name of the target, strip id number, XXX-script
	161	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
	162	-e 's@temp-@@' \
[7bf2fdd]	163	@@ -553,7 +570,9 @@
[8b7357b]	164	[[ "$OPTIMIZE" != "0" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
	165	fi
	166	#
	167	+ wrt_paco_prep
	168	wrt_run_as_chroot1 "${this_script}" "${file}"
	169	+ wrt_paco_log "$pkg_tarball"
	170	#
	171	[[ "$pkg_tarball" != "" ]] && wrt_remove_build_dirs "${name}"
	172	#
[7bf2fdd]	173	@@ -568,6 +587,16 @@
[8b7357b]	174	PREV=${this_script}${N}
	175	# Set system_build envar for iteration targets
	176	system_build=$basicsystem
	177	+
	178	+ # Reinstalling paco after readsjusting the toolchain.
	179	+ case "${this_script}" in
	180	+ *adjusting)
	181	+ TMP_SCRIPT="$this_script"
	182	+ this_script=`echo ${this_script} \| sed -e 's/adjusting/x-paco/'`
	183	+ wrt_paco_inst "$this_script"
	184	+ this_script="$TMP_SCRIPT" ;;
	185	+ esac
	186	+
	187	done # for file in final-system/* ...
	188	}
	189
[7bf2fdd]	190	@@ -604,6 +633,11 @@
[8b7357b]	191	# Keep the script file name
	192	this_script=`basename $file`
	193
	194	+ # If $this_script corresponds to a paco script, then skip it
	195	+ case "${this_script}" in
	196	+ *paco) continue ;;
	197	+ esac
	198	+
	199	# Test if the stripping phase must be skipped
	200	# Skip alsp temp-perl for iterative runs
	201	case $this_script in
[7bf2fdd]	202	@@ -611,6 +645,18 @@
[8b7357b]	203	temp-perl) [[ -n "$N" ]] && continue ;;
	204	esac
	205
	206	+ # Install paco as the first package in ch6, before installing
	207	+ # linux-libc-headers, except in iterartive builds
	208	+ if [[ -z "$N" ]]; then
	209	+ case $this_script in
	210	+ *linux-headers)
	211	+ TMP_SCRIPT="$this_script"
	212	+ this_script=`echo $this_script \| sed -e 's/linux-headers/a-paco/'`
	213	+ wrt_paco_inst "$this_script"
	214	+ this_script="$TMP_SCRIPT" ;;
	215	+ esac
	216	+ fi
	217	+
	218	# Grab the name of the target, strip id number, XXX-script
	219	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
	220	-e 's@temp-@@' \
[7bf2fdd]	221	@@ -665,7 +711,9 @@
[8b7357b]	222	[[ "$OPTIMIZE" != "0" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
	223	fi
	224	#
	225	+ wrt_paco_prep
	226	wrt_run_as_root2 "${this_script}" "${file}"
	227	+ wrt_paco_log "$pkg_tarball"
	228	#
	229	[[ "$pkg_tarball" != "" ]] && wrt_remove_build_dirs2 "${name}"
	230	#
[7bf2fdd]	231	@@ -680,6 +728,16 @@
[8b7357b]	232	PREV=${this_script}${N}
	233	# Set system_build envar for iteration targets
	234	system_build=$basicsystem
	235	+
	236	+ # Reinstalling paco after readsjusting the toolchain.
	237	+ case "${this_script}" in
	238	+ *adjusting)
	239	+ TMP_SCRIPT="$this_script"
	240	+ this_script=`echo ${this_script} \| sed -e 's/adjusting/x-paco/'`
	241	+ wrt_paco_inst "$this_script"
	242	+ this_script="$TMP_SCRIPT" ;;
	243	+ esac
	244	+
	245	done # for file in final-system/* ...
	246	}
	247
[7bf2fdd]	248	@@ -728,7 +786,17 @@
[8b7357b]	249	#
	250	[[ "$pkg_tarball" != "" ]] && wrt_unpack2 "$pkg_tarball"
	251	#
	252	+ case $this_script in
	253	+ bootscripts \| *udev-rules )
	254	+ wrt_paco_prep ;;
	255	+ esac
	256	wrt_run_as_chroot1 "${this_script}" "${file}"
	257	+ case $this_script in
	258	+ bootscripts \| *udev-rules )
	259	+ wrt_paco_log "$pkg_tarball" ;;
	260	+ *)
	261	+ wrt_paco_log "clfs-sysconf" ;;
	262	+ esac
	263	#
	264	[[ "$pkg_tarball" != "" ]] && wrt_remove_build_dirs "${name}"
	265	#
[7bf2fdd]	266	@@ -790,7 +858,17 @@
[8b7357b]	267	#
	268	[[ "$pkg_tarball" != "" ]] && wrt_unpack3 "$pkg_tarball"
	269	#
	270	+ case $this_script in
	271	+ bootscripts \| *udev-rules )
	272	+ wrt_paco_prep ;;
	273	+ esac
	274	wrt_run_as_root2 "${this_script}" "${file}"
	275	+ case $this_script in
	276	+ bootscripts \| *udev-rules )
	277	+ wrt_paco_log "$pkg_tarball" ;;
	278	+ *)
	279	+ wrt_paco_log "clfs-sysconf" ;;
	280	+ esac
	281	#
	282	[[ "$pkg_tarball" != "" ]] && wrt_remove_build_dirs2 "${name}"
	283	#
[7bf2fdd]	284	@@ -862,8 +940,13 @@
[8b7357b]	285	else
	286	wrt_run_as_chroot1 "${this_script}" "${file}"
	287	fi
	288	+ wrt_paco_log "clfs-sysconf"
	289	;;
	290	- *) wrt_run_as_chroot1 "${this_script}" "${file}" ;;
	291	+ *kernel) wrt_paco_prep
	292	+ wrt_run_as_chroot1 "${this_script}" "${file}"
	293	+ wrt_paco_log "$pkg_tarball" ;;
	294	+ *) wrt_run_as_chroot1 "${this_script}" "${file}"
	295	+ wrt_paco_log "clfs-sysconf" ;;
	296	esac
	297	#
	298	# Housekeeping...remove any build directory(ies) except if the package build fails.
[7bf2fdd]	299	@@ -941,8 +1024,13 @@
[8b7357b]	300	else
	301	wrt_run_as_root2 "${this_script}" "${file}"
	302	fi
	303	+ wrt_paco_log "clfs-sysconf"
	304	;;
	305	- *) wrt_run_as_root2 "${this_script}" "${file}" ;;
	306	+ *kernel) wrt_paco_prep
	307	+ wrt_run_as_root2 "${this_script}" "${file}"
	308	+ wrt_paco_log "$pkg_tarball" ;;
	309	+ *) wrt_run_as_root2 "${this_script}" "${file}"
	310	+ wrt_paco_log "clfs-sysconf" ;;
	311	esac
	312	#
	313	# Housekeeping...remove any build directory(ies) except if the package build fails.
	314	Index: CLFS/clfs.xsl
	315	===================================================================
[7bf2fdd]	316	--- CLFS/clfs.xsl (revision 3007)
[8b7357b]	317	+++ CLFS/clfs.xsl (working copy)
[963fdae]	318	@@ -45,6 +45,9 @@
[8b7357b]	319	<!-- Locale settings -->
	320	<xsl:param name="lang" select="C"/>
	321
	322	+ <!-- Use paco? -->
[7bf2fdd]	323	+ <xsl:param name="use_paco" select="y"/>
[8b7357b]	324	+
	325	<xsl:template match="/">
	326	<xsl:apply-templates select="//sect1"/>
	327	</xsl:template>
[963fdae]	328	@@ -106,6 +109,25 @@
[8b7357b]	329	<xsl:text>tar -xvf ../vim-&vim-version;-lang.* --strip-components=1 </xsl:text>
	330	</xsl:if>
	331	</xsl:if>
	332	+ <!-- paco begin -->
	333	+ <!-- General rule -->
[7bf2fdd]	334	+ <xsl:if test="$use_paco != 'n' and
[8b7357b]	335	+ @id='ch-scripts-bootscripts' or
	336	+ @id='ch-scripts-udev-rules' or
	337	+ @id='ch-bootable-kernel' or
	338	+ (../@id='chapter-building-system' and
	339	+ @id!='ch-system-temp-perl' and
	340	+ contains(string(),'make') and
	341	+ contains(string(),'install'))">
	342	+ <xsl:text>export LD_PRELOAD=/usr/lib/libpaco-log.so </xsl:text>
	343	+ </xsl:if>
	344	+ <!-- Linux headers -->
[7bf2fdd]	345	+ <xsl:if test="$use_paco != 'n' and
[8b7357b]	346	+ @id='ch-system-linux-headers' and
	347	+ contains(string(),'install')">
	348	+ <xsl:text>export LD_PRELOAD=/usr/lib/libpaco-log.so </xsl:text>
	349	+ </xsl:if>
	350	+ <!-- paco end -->
	351	<xsl:apply-templates select=".//para/userinput \| .//screen"/>
	352	<xsl:text>exit</xsl:text>
	353	</exsl:document>
[799b0d1]	354	Index: common/paco-build-hlfs.sh
	355	===================================================================
	356	--- common/paco-build-hlfs.sh (revision 0)
	357	+++ common/paco-build-hlfs.sh (revision 0)
[b9ec725]	358	@@ -0,0 +1,12 @@
[799b0d1]	359	+#!/bin/sh
	360	+set -e
	361	+
	362	+cd $PKGDIR
[b9ec725]	363	+./configure --sysconfdir=/etc \
	364	+ --enable-scripts \
[799b0d1]	365	+ --disable-gpaco \
[b9ec725]	366	+ --disable-static \
	367	+ --with-pic &&
[799b0d1]	368	+make &&
	369	+make install &&
	370	+make logme
[059822c]	371	Index: common/config
	372	===================================================================
[7bf2fdd]	373	--- common/config (revision 3007)
[059822c]	374	+++ common/config (working copy)
[963fdae]	375	@@ -91,6 +91,23 @@
[7bf2fdd]	376	#--- Run farce testing n(no)/y(yes)
	377	RUN_FARCE=n
[d748b31]	378
[059822c]	379	+#==== PACO VARIABLES ====
[7bf2fdd]	380	+#--- Use paco? n(no)/y(yes)
	381	+USE_PACO=y
[9b09518]	382	+PACO_VERSION=1.10.10
[059822c]	383	+
	384	+#--- Name of the Paco source package
[8715be1]	385	+PACO_FILE=paco-$PACO_VERSION.tar.bz2 # (use .tar.gz if preferred)
	386	+
	387	+#--- Sourceforge mirror to use for Paco source download
	388	+# Europe: heanet, belnet, puzzle, surfnet, switch, kent
	389	+# North America: superb-east, superb-west, umn, easynews
	390	+# South America: ufpr
	391	+# Asia: nchc, jaist
	392	+# Australia: optusnet
	393	+PACO_MIRROR1=heanet
	394	+PACO_MIRROR2=kent
[059822c]	395	+
[4795dfb]	396	#==== INTERNAL VARIABLES ====
	397	# Don't edit it unless you know what you are doing
	398
[963fdae]	399	@@ -108,3 +125,9 @@
[4795dfb]	400
	401	#--- farce report log directory
	402	FARCELOGDIR=$LOGDIR/farce
	403	+
	404	+#--- Variables needed by paco
[059822c]	405	+PACO_INCLUDE=/
[41dfd7c]	406	+PACO_EXCLUDE=/${SCRIPT_ROOT}
[059822c]	407	+PACO_TMPFILE=/tmp/paco.tmp
	408	+LD_PRELOAD=/usr/lib/libpaco-log.so
	409	Index: common/func_validate_configs.sh
	410	===================================================================
[7bf2fdd]	411	--- common/func_validate_configs.sh (revision 3007)
[059822c]	412	+++ common/func_validate_configs.sh (working copy)
[7bf2fdd]	413	@@ -88,10 +88,10 @@
[059822c]	414	inline_doc
	415
	416	# First internal variables, then the ones that change the book's flavour, and lastly system configuration variables
[daa9b6c]	417	- local -r hlfs_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE GETPKG RUNMAKE MODEL GRSECURITY_HOST TEST BOMB_TEST OPTIMIZE REPORT COMPARE RUN_ICA RUN_FARCE ITERATIONS STRIP FSTAB CONFIG GETKERNEL KEYMAP PAGE TIMEZONE LANG LC_ALL LUSER LGROUP"
	418	- local -r clfs_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE GETPKG RUNMAKE METHOD ARCH TARGET TEST BOMB_TEST OPTIMIZE REPORT COMPARE RUN_ICA RUN_FARCE ITERATIONS STRIP FSTAB BOOT_CONFIG CONFIG GETKERNEL KEYMAP VIMLANG PAGE TIMEZONE LANG LUSER LGROUP"
	419	+ local -r hlfs_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE USE_PACO GETPKG RUNMAKE MODEL GRSECURITY_HOST TEST BOMB_TEST OPTIMIZE REPORT COMPARE RUN_ICA RUN_FARCE ITERATIONS STRIP FSTAB CONFIG GETKERNEL KEYMAP PAGE TIMEZONE LANG LC_ALL LUSER LGROUP"
	420	+ local -r clfs_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE USE_PACO GETPKG RUNMAKE METHOD ARCH TARGET TEST BOMB_TEST OPTIMIZE REPORT COMPARE RUN_ICA RUN_FARCE ITERATIONS STRIP FSTAB BOOT_CONFIG CONFIG GETKERNEL KEYMAP VIMLANG PAGE TIMEZONE LANG LUSER LGROUP"
[7bf2fdd]	421	local -r clfs2_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE GETPKG RUNMAKE ARCH TARGET OPTIMIZE REPORT STRIP FSTAB CONFIG GETKERNEL KEYMAP VIMLANG PAGE TIMEZONE LANG LUSER LGROUP"
	422	- local -r lfs_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE GETPKG RUNMAKE TEST BOMB_TEST OPTIMIZE REPORT COMPARE RUN_ICA RUN_FARCE ITERATIONS STRIP FSTAB CONFIG GETKERNEL VIMLANG PAGE TIMEZONE LANG LUSER LGROUP"
[daa9b6c]	423	+ local -r lfs_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE USE_PACO GETPKG RUNMAKE TEST BOMB_TEST OPTIMIZE REPORT COMPARE RUN_ICA RUN_FARCE ITERATIONS STRIP FSTAB CONFIG GETKERNEL VIMLANG PAGE TIMEZONE LANG LUSER LGROUP"
[7bf2fdd]	424	local -r blfs_PARAM_LIST="BRANCH_ID BLFS_ROOT BLFS_XML"
[059822c]	425
	426	local -r ERROR_MSG_pt1='The variable \"${L_arrow}${config_param}${R_arrow}\" value ${L_arrow}${BOLD}${!config_param}${R_arrow} is invalid,'
[7bf2fdd]	427	@@ -182,6 +182,7 @@
	428	[[ "$GETPKG" = "y" ]] && validate_against_str "xnx xyx"
[f358747]	429	fi ;;
[7bf2fdd]	430	RUNMAKE) validate_against_str "xnx xyx" ;;
	431	+ USE_PACO) validate_against_str "xnx xyx" ;;
	432	REPORT) validate_against_str "xnx xyx"
	433	if [[ "${!config_param}" = "y" ]]; then
[4795dfb]	434	if [[ `type -p bc` ]]; then
[059822c]	435	Index: common/paco-functions
	436	===================================================================
	437	--- common/paco-functions (revision 0)
	438	+++ common/paco-functions (revision 0)
[7bf2fdd]	439	@@ -0,0 +1,328 @@
[059822c]	440	+#!/bin/bash
	441	+
	442	+#----------------------------#
	443	+wrt_paco_inst() { #
	444	+#----------------------------#
[d748b31]	445	+
[8b7357b]	446	+local paco_script="$1"
	447	+
	448	+check_build_model
[d748b31]	449	+
[7bf2fdd]	450	+if [ $USE_PACO = "y" ]; then
	451	+ case $PROGNAME in
[8b7357b]	452	+ clfs )
	453	+ paco_file="final-system/$paco_script"
	454	+ basicsystem="$basicsystem $paco_script" ;;
	455	+ * )
	456	+ paco_file="chapter06/$paco_script"
	457	+ chapter6="$chapter6 $paco_script" ;;
	458	+ esac
[6821737]	459	+
	460	+ # Copy the paco build script to the correct directory and make it executable
[799b0d1]	461	+ cp $JHALFSDIR/paco-build-$PROGNAME.sh $JHALFSDIR/${PROGNAME}-commands/$paco_file &&
[6821737]	462	+ chmod +x $JHALFSDIR/${PROGNAME}-commands/$paco_file
[059822c]	463	+
	464	+ # Write target, dependency and unpack
[8b7357b]	465	+ if [ $CLFS_BOOT = 1 ]; then
	466	+ wrt_target_boot "$paco_script" "$PREV"
	467	+ wrt_unpack3 "$PACO_FILE"
	468	+ wrt_run_as_root2 "${paco_script}" "${paco_file}"
	469	+ wrt_remove_build_dirs2 "paco"
[7bf2fdd]	470	+ else
[8b7357b]	471	+ wrt_target "$paco_script" "$PREV"
	472	+ wrt_unpack2 "$PACO_FILE"
	473	+ wrt_run_as_chroot1 "${paco_script}" "${paco_file}"
	474	+ wrt_remove_build_dirs "paco"
	475	+ fi
[059822c]	476	+
[2b88404]	477	+ wrt_touch
[059822c]	478	+
	479	+ # Override the PREV variable
[6821737]	480	+ PREV="$paco_script"
[059822c]	481	+fi
	482	+}
	483	+
	484	+
	485	+#----------------------------------#
	486	+wrt_paco_prep() { # Export Paco variables
	487	+#----------------------------------# and remove tmpfile
[d748b31]	488	+
[8b7357b]	489	+local TMPFILEPATH
	490	+
	491	+check_build_model
[d748b31]	492	+
[b9ec725]	493	+check_log_package
	494	+
[7bf2fdd]	495	+if [ $USE_PACO = "y" ] && [ $LOG_PACKAGE != 0 ]; then
[8b7357b]	496	+ if [ $CLFS_BOOT = 1 ]; then
	497	+ TMPFILEPATH="$PACO_TMPFILE"
	498	+ else
	499	+ TMPFILEPATH="\$(MOUNT_PT)$PACO_TMPFILE"
	500	+ fi
[059822c]	501	+(
	502	+cat << EOF
	503	+ @echo "export PACO_INCLUDE=$PACO_INCLUDE" >> envars && \\
[b9ec725]	504	+ echo "export PACO_EXCLUDE=\$(SRC):$PACO_EXCLUDE" >> envars && \\
[059822c]	505	+ echo "export PACO_TMPFILE=$PACO_TMPFILE" >> envars && \\
[8b7357b]	506	+ rm -f $TMPFILEPATH
[059822c]	507	+EOF
	508	+) >> $MKFILE.tmp
	509	+fi
	510	+}
	511	+
	512	+
	513	+#----------------------------------#
	514	+wrt_paco_log() { # If the tmpfile exist, then log the current package
	515	+#----------------------------------# and remove tempfile
[d748b31]	516	+local PACKAGE
	517	+
[8b7357b]	518	+# Extract package name and version from the tarball name
[2b88404]	519	+PACKAGE=`echo $1 \| sed -e 's/.tar.*//'`
[059822c]	520	+
[8b7357b]	521	+check_build_model
[059822c]	522	+
[8b7357b]	523	+# Check if the package should be logged
[b9ec725]	524	+check_log_package
	525	+
[8b7357b]	526	+
[7bf2fdd]	527	+if [ $USE_PACO = "y" ]; then
[b9ec725]	528	+ if [ $LOG_PACKAGE != 0 ]; then
[8b7357b]	529	+ # Only use this if doing CLFS boot build
	530	+ if [ $CLFS_BOOT = 1 ]; then
	531	+(
	532	+cat << EOF
	533	+ @if [ -e $PACO_TMPFILE ]; then \\
	534	+ paco -lp+ $PACKAGE < $PACO_TMPFILE && \\
	535	+ rm -f $PACO_TMPFILE; \\
	536	+ fi;
	537	+EOF
	538	+) >> $MKFILE.tmp
	539	+ # All else should use these commands
	540	+ else
[059822c]	541	+(
	542	+cat << EOF
	543	+ @if [ -e \$(MOUNT_PT)$PACO_TMPFILE ]; then \\
[4795dfb]	544	+ \$(CHROOT1) 'paco -lp+ $PACKAGE < $PACO_TMPFILE' && \\
[059822c]	545	+ rm -f \$(MOUNT_PT)$PACO_TMPFILE; \\
	546	+ fi;
	547	+EOF
	548	+) >> $MKFILE.tmp
[8b7357b]	549	+ fi
[b9ec725]	550	+ fi
[8b7357b]	551	+ # Add missing files to the logs if needed
[b9ec725]	552	+ wrt_paco_add_log
[059822c]	553	+fi
[b9ec725]	554	+}
[059822c]	555	+
[b9ec725]	556	+
	557	+#----------------------------------#
[8b7357b]	558	+fnc_add_log() { #
	559	+#----------------------------------#
	560	+
	561	+MISSING_FILE=$1
	562	+
	563	+if [ $CLFS_BOOT = 1 ]; then
	564	+ echo -e "\t@$MISSING_FILE \| paco -lp+ $PACKAGE" >> $MKFILE.tmp
	565	+else
	566	+ echo -e "\t@\$(CHROOT1) '$MISSING_FILE \| paco -lp+ $PACKAGE'" >> $MKFILE.tmp
	567	+fi
	568	+}
	569	+
	570	+
	571	+#----------------------------------#
[b9ec725]	572	+wrt_paco_add_log() { #
	573	+#----------------------------------#
	574	+# Some packages create files using bash redirection, which the LD_PRELOAD lib don't notice
	575	+# These rules will add the missing files to the proper logs.
	576	+# Most of these is not needed for HLFS, but they do no harm.
[7bf2fdd]	577	+if [ $USE_PACO = "y" ]; then
[8b7357b]	578	+ case $this_script in
[7bf2fdd]	579	+ *e2fsprogs)
	580	+ fnc_add_log "echo /etc/mke2fs.conf"
	581	+ ;;
	582	+ *bootscripts)
	583	+ fnc_add_log "echo /etc/sysconfig/rc"
	584	+ fnc_add_log "echo /etc/sysconfig/createfiles"
	585	+ ;;
[b9ec725]	586	+ *glibc)
[8b7357b]	587	+ fnc_add_log "find /lib -type l"
[7bf2fdd]	588	+ fnc_add_log "echo /etc/{nsswitch.conf,ld.so.conf}"
[b9ec725]	589	+ ;;
	590	+ *ncurses)
[7bf2fdd]	591	+ fnc_add_log "echo /usr/lib/{libcurses.so,libncurses.so{,.5},libform.so,libpanel.so,libmenu.so}"
[b9ec725]	592	+ ;;
	593	+ *bash)
[8b7357b]	594	+ fnc_add_log "echo /bin/sh"
[b9ec725]	595	+ ;;
	596	+ *flex)
[8b7357b]	597	+ fnc_add_log "echo /usr/bin/lex"
[b9ec725]	598	+ ;;
	599	+ *shadow)
[8b7357b]	600	+ fnc_add_log "echo /etc/login.defs"
[7bf2fdd]	601	+ fnc_add_log "echo /etc/group"
[b9ec725]	602	+ ;;
	603	+ *hotplug)
[8b7357b]	604	+ fnc_add_log "echo /var/log/hotplug"
	605	+ fnc_add_log "echo /var/run/usb"
[b9ec725]	606	+ ;;
	607	+ *sysklogd)
[8b7357b]	608	+ fnc_add_log "echo /etc/syslog.conf"
[b9ec725]	609	+ ;;
	610	+ *sysvinit)
[8b7357b]	611	+ fnc_add_log "echo /etc/inittab"
[7bf2fdd]	612	+ fnc_add_log "echo /usr/bin/lastb"
	613	+ ;;
	614	+ *texinfo)
	615	+ fnc_add_log "echo /usr/share/info/dir"
[b9ec725]	616	+ ;;
	617	+ *udev)
[8b7357b]	618	+ fnc_add_log "find /lib/udev/devices"
	619	+ fnc_add_log "echo /lib/firmware"
	620	+ fnc_add_log "find /etc/udev/rules.d -type f"
[7bf2fdd]	621	+ fnc_add_log "echo /etc/udev/udev.conf"
	622	+ ;;
	623	+ *udev-rules)
	624	+ fnc_add_log "echo /lib/udev/devices/{null,console}"
[b9ec725]	625	+ ;;
	626	+ *util-linux)
[8b7357b]	627	+ fnc_add_log "echo /var/lib/hwclock"
	628	+ fnc_add_log "echo /etc/nologin.txt"
[b9ec725]	629	+ ;;
	630	+ *vim)
[8b7357b]	631	+ fnc_add_log "echo /etc/vimrc"
[b9ec725]	632	+ ;;
[8b7357b]	633	+ # Rules below here will log configuration files created in {C,H}LFS
	634	+ # They will end up in a log named {c,h}lfs-sysconf
[b9ec725]	635	+ *setclock)
[8b7357b]	636	+ fnc_add_log "echo /etc/sysconfig/clock"
[b9ec725]	637	+ ;;
	638	+ *inputrc)
[8b7357b]	639	+ fnc_add_log "echo /etc/inputrc"
[b9ec725]	640	+ ;;
	641	+ *profile)
[8b7357b]	642	+ fnc_add_log "echo /etc/profile"
[b9ec725]	643	+ ;;
	644	+ *hostname)
[8b7357b]	645	+ fnc_add_log "echo /etc/sysconfig/network"
[b9ec725]	646	+ ;;
	647	+ *localnet)
[8b7357b]	648	+ fnc_add_log "echo /etc/sysconfig/network"
[b9ec725]	649	+ ;;
	650	+ *hosts)
[8b7357b]	651	+ fnc_add_log "echo /etc/hosts"
[b9ec725]	652	+ ;;
	653	+ *network)
[8b7357b]	654	+ fnc_add_log "echo /etc/sysconfig/network-devices/ifconfig.eth0/ipv4"
	655	+ fnc_add_log "echo /etc/resolv.conf"
[b9ec725]	656	+ ;;
	657	+ *fstab)
[8b7357b]	658	+ fnc_add_log "echo /etc/fstab"
[b9ec725]	659	+ ;;
[7bf2fdd]	660	+ theend \| finished)
[8b7357b]	661	+ fnc_add_log "echo /etc/$PROGNAME-release"
[7bf2fdd]	662	+ fnc_add_log "echo /var/run/utmp"
	663	+ fnc_add_log "echo /var/log/btmp"
	664	+ fnc_add_log "echo /var/log/wtmp"
	665	+ fnc_add_log "echo /var/log/lastlog"
[b9ec725]	666	+ ;;
	667	+ esac
[059822c]	668	+fi
	669	+}
[b9ec725]	670	+
	671	+
	672	+#----------------------------------#
	673	+check_log_package() { #
	674	+#----------------------------------#
	675	+# Maybe don't need this function, but it will avoid writing some
	676	+# unnecessary paco commands in the Makefile.
	677	+
	678	+case $this_script in
[2b88404]	679	+ *changingowner) LOG_PACKAGE=0 ;;
[b9ec725]	680	+ *creatingdirs) LOG_PACKAGE=0 ;;
	681	+ *createfiles) LOG_PACKAGE=0 ;;
[2b88404]	682	+ *pwdgroup) LOG_PACKAGE=0 ;;
	683	+ *devices) LOG_PACKAGE=0 ;;
[8b7357b]	684	+ *stripping) LOG_PACKAGE=0 ;;
[b9ec725]	685	+ *strippingagain) LOG_PACKAGE=0 ;;
[8b7357b]	686	+ *adjusting) LOG_PACKAGE=0 ;;
	687	+ *temp-perl) LOG_PACKAGE=0 ;;
[b9ec725]	688	+ *readjusting) LOG_PACKAGE=0 ;;
	689	+ *setclock) LOG_PACKAGE=0 ;;
	690	+ *inputrc) LOG_PACKAGE=0 ;;
	691	+ *profile) LOG_PACKAGE=0 ;;
	692	+ *hostname) LOG_PACKAGE=0 ;;
	693	+ *localnet) LOG_PACKAGE=0 ;;
	694	+ *hosts) LOG_PACKAGE=0 ;;
	695	+ *network) LOG_PACKAGE=0 ;;
	696	+ *fstab) LOG_PACKAGE=0 ;;
	697	+ *theend) LOG_PACKAGE=0 ;;
	698	+ *finished) LOG_PACKAGE=0 ;;
	699	+ *) LOG_PACKAGE=1 ;;
	700	+esac
	701	+}
[8715be1]	702	+
	703	+#----------------------------------#
	704	+get_paco_src() { #
	705	+#----------------------------------#
	706	+# Download the paco sources
	707	+# We don't do any MD5SUM checking as of yet
	708	+# http://jaist.dl.sourceforge.net/sourceforge/paco/paco-1.10.10.tar.bz2
	709	+
	710	+local PACO_URL1="http://$PACO_MIRROR1.dl.sourceforge.net/sourceforge/paco/$PACO_FILE"
	711	+local PACO_URL2="http://$PACO_MIRROR2.dl.sourceforge.net/sourceforge/paco/$PACO_FILE"
	712	+
	713	+# Test if paco is to be used
[7bf2fdd]	714	+[[ ! "$USE_PACO" = "y" ]] && return
[8715be1]	715	+
	716	+# If the file exists in the archive copy it to the $BUILDDIR/sources dir.
	717	+if [ ! -z ${SRC_ARCHIVE} ] &&
	718	+ [ -d ${SRC_ARCHIVE} ] &&
	719	+ [ -f ${SRC_ARCHIVE}/$PACO_FILE ]; then
	720	+ cp ${SRC_ARCHIVE}/$PACO_FILE .
	721	+ echo "$PACO_FILE: -- copied from $SRC_ARCHIVE"
	722	+ fromARCHIVE=1
	723	+else
	724	+ echo "${BOLD}${YELLOW}$PACO_FILE: not found in ${SRC_ARCHIVE}${OFF}"
	725	+ fromARCHIVE=0
	726	+ # If the file does not exist yet in /sources download a fresh one
	727	+ if [ ! -f $PACO_FILE ] ; then
	728	+ if ! wget $PACO_URL1 && ! wget $PACO_URL2 ; then
	729	+ gs_wrt_message "$PACO_FILE not found in the SRC_ARCHIVE or on any server..SKIPPING"
	730	+ continue
	731	+ fi
	732	+ fi
	733	+fi
	734	+
	735	+# Copy the freshly downloaded file to the source archive.
	736	+if [ ! -z ${SRC_ARCHIVE} ] &&
	737	+ [ -d ${SRC_ARCHIVE} ] &&
	738	+ [ -w ${SRC_ARCHIVE} ] &&
	739	+ [ "$fromARCHIVE" = "0" ] ; then
	740	+ echo "Storing file:<$PACO_FILE> in the package archive"
	741	+ cp -f $PACO_FILE ${SRC_ARCHIVE}
	742	+fi
	743	+}
[8b7357b]	744	+
	745	+
	746	+#----------------------------------#
	747	+check_build_model() { #
	748	+#----------------------------------#
	749	+# Check what script we're running, and set some switches accordingly
	750	+
	751	+CLFS_BOOT=0
	752	+
	753	+case $PROGNAME in
	754	+ hlfs)
	755	+ # Not using Paco with uClibc, even if requested
	756	+ if [ "$MODEL" = "uclibc" ]; then
[7bf2fdd]	757	+ USE_PACO=n
[8b7357b]	758	+ fi
	759	+ ;;
	760	+ clfs)
	761	+ # CLFS boot method require it's own commands
	762	+ if [ "$METHOD" = "boot" ]; then
	763	+ CLFS_BOOT=1
	764	+ fi
	765	+ ;;
	766	+esac
	767	+}
[799b0d1]	768	Index: common/paco-build-lfs.sh
[6821737]	769	===================================================================
[799b0d1]	770	--- common/paco-build-lfs.sh (revision 0)
	771	+++ common/paco-build-lfs.sh (revision 0)
[b9ec725]	772	@@ -0,0 +1,10 @@
[6821737]	773	+#!/bin/sh
	774	+set -e
	775	+
	776	+cd $PKGDIR
[b9ec725]	777	+./configure --sysconfdir=/etc \
	778	+ --enable-scripts \
	779	+ --disable-gpaco &&
[6821737]	780	+make &&
	781	+make install &&
	782	+make logme
[8b7357b]	783	Index: common/paco-build-clfs.sh
	784	===================================================================
	785	--- common/paco-build-clfs.sh (revision 0)
	786	+++ common/paco-build-clfs.sh (revision 0)
	787	@@ -0,0 +1,10 @@
	788	+#!/bin/sh
	789	+set -e
	790	+
	791	+cd $PKGDIR
	792	+./configure --sysconfdir=/etc \
	793	+ --enable-scripts \
	794	+ --disable-gpaco &&
	795	+make &&
	796	+make install &&
	797	+make logme
[059822c]	798	Index: common/common-functions
	799	===================================================================
[7bf2fdd]	800	--- common/common-functions (revision 3007)
[059822c]	801	+++ common/common-functions (working copy)
[a708b15]	802	@@ -69,6 +69,9 @@
[059822c]	803	in the configuration file has the proper packages and patches for the
	804	book version being processed.
	805
	806	+${BOLD} --no-paco${OFF}
	807	+ dissables paco logging feature.
	808	+
[f3ae556]	809	${BOLD} -O, --optimize${OFF}
	810	Optimize [0-2]
	811	0 = no optimization
[7bf2fdd]	812	@@ -706,6 +709,7 @@
[8b7357b]	813	--stringparam page $PAGE \
	814	--stringparam lang $LANG \
[7bf2fdd]	815	--stringparam keymap $KEYMAP \
[8b7357b]	816	+ --stringparam use_paco $USE_PACO \
	817	-o ./${PROGNAME}-commands/ $XSL $BOOK/$ARCH-index.xml >>$LOGDIR/$LOG 2>&1
	818	;;
	819
[7bf2fdd]	820	@@ -733,6 +737,7 @@
[059822c]	821	--stringparam lc_all $LC_ALL \
[7bf2fdd]	822	--stringparam keymap $KEYMAP \
[059822c]	823	--stringparam grsecurity_host $GRSECURITY_HOST \
	824	+ --stringparam use_paco $USE_PACO \
	825	-o ./${PROGNAME}-commands/ $XSL $BOOK/index.xml >>$LOGDIR/$LOG 2>&1
	826	;;
	827	lfs)
[7bf2fdd]	828	@@ -745,6 +750,7 @@
[059822c]	829	--stringparam timezone $TIMEZONE \
	830	--stringparam page $PAGE \
	831	--stringparam lang $LANG \
	832	+ --stringparam use_paco $USE_PACO \
	833	-o ./${PROGNAME}-commands/ $XSL $BOOK/index.xml >>$LOGDIR/$LOG 2>&1
	834	;;
[8230977]	835	*) exit 1 ;;
[7bf2fdd]	836	@@ -811,6 +817,9 @@
[8715be1]	837	# Generate URLs file
	838	create_urls
	839
	840	+ # If Paco is to be used, then download the sources
	841	+ get_paco_src
	842	+
	843	IFS=$'\x0A' # Modify the 'internal field separator' to break on 'LF' only
	844	for line in `cat urls.lst`; do
	845	IFS=$saveIFS # Restore the system defaults
[059822c]	846	Index: HLFS/hlfs.xsl
	847	===================================================================
[7bf2fdd]	848	--- HLFS/hlfs.xsl (revision 3007)
[059822c]	849	+++ HLFS/hlfs.xsl (working copy)
[963fdae]	850	@@ -46,6 +46,9 @@
[c665386]	851	<xsl:param name="lang" select="C"/>
	852	<xsl:param name="lc_all" select="C"/>
[059822c]	853
	854	+ <!-- Use paco? -->
[7bf2fdd]	855	+ <xsl:param name="use_paco" select="y"/>
[059822c]	856	+
	857	<xsl:template match="/">
	858	<xsl:apply-templates select="//sect1"/>
	859	</xsl:template>
[7bf2fdd]	860	@@ -196,6 +199,10 @@
[059822c]	861	<!-- Fixing bootscripts installation -->
	862	<xsl:when test="ancestor::sect1[@id='bootable-bootscripts'] and
	863	string() = 'make install'">
	864	+ <!-- inserting LD_PRELOAD before installing bootscripts -->
[7bf2fdd]	865	+ <xsl:if test="$use_paco != 'n' and $model != 'uclibc'">
[059822c]	866	+ <xsl:text>export LD_PRELOAD=/usr/lib/libpaco-log.so </xsl:text>
	867	+ </xsl:if>
	868	<xsl:text>make install </xsl:text>
	869	<xsl:text>cd ../blfs-bootscripts-&blfs-bootscripts-version; </xsl:text>
	870	</xsl:when>
[7bf2fdd]	871	@@ -296,6 +303,25 @@
[059822c]	872	<xsl:apply-templates/>
	873	<xsl:text> \|\| true </xsl:text>
	874	</xsl:when>
	875	+ <!-- paco begin -->
	876	+ <!-- General rule -->
[7bf2fdd]	877	+ <xsl:when test="$use_paco != 'n' and $model != 'uclibc' and
[059822c]	878	+ ancestor::chapter[@id != 'chapter-temporary-tools'] and
	879	+ contains(string(),'make') and
	880	+ contains(string(),'install')">
	881	+ <xsl:text>export LD_PRELOAD=/usr/lib/libpaco-log.so </xsl:text>
[7bf2fdd]	882	+ <xsl:apply-templates/>
[059822c]	883	+ <xsl:text> </xsl:text>
	884	+ </xsl:when>
	885	+ <!-- Linux-libc-headers -->
[7bf2fdd]	886	+ <xsl:when test="$use_paco != 'n' and $model != 'uclibc' and
[9b09518]	887	+ ancestor::sect1[@id='ch-system-linux-headers'] and
[059822c]	888	+ contains(string(),'install ')">
	889	+ <xsl:text>export LD_PRELOAD=/usr/lib/libpaco-log.so </xsl:text>
[7bf2fdd]	890	+ <xsl:apply-templates/>
[059822c]	891	+ <xsl:text> </xsl:text>
	892	+ </xsl:when>
	893	+ <!-- paco end -->
	894	<!-- The rest of commands -->
	895	<xsl:otherwise>
	896	<xsl:apply-templates/>
	897	Index: HLFS/master.sh
	898	===================================================================
[7bf2fdd]	899	--- HLFS/master.sh (revision 3007)
[059822c]	900	+++ HLFS/master.sh (working copy)
[7bf2fdd]	901	@@ -47,7 +47,9 @@
[9b09518]	902	EOF
	903	) >> $MKFILE.tmp
[963fdae]	904	[[ "$TEST" != "0" ]] && wrt_test_log2 "${this_script}"
[9b09518]	905	+ wrt_paco_prep
	906	wrt_run_as_chroot1 "$toolchain" "$this_script"
	907	+ wrt_paco_log "`echo $toolchain \| sed -e 's@[0-9]\{3\}-@@'`"
	908	;;
	909
	910	*)
[7bf2fdd]	911	@@ -281,6 +283,11 @@
[8230977]	912	# Keep the script file name
	913	this_script=`basename $file`
	914
	915	+ # If this script is *-paco, then skip it
	916	+ case $this_script in
	917	+ *paco ) continue ;;
	918	+ esac
	919	+
	920	# Skip this script depending on jhalfs.conf flags set.
	921	case $this_script in
	922	# We'll run the chroot commands differently than the others, so skip them in the
[7bf2fdd]	923	@@ -290,6 +297,18 @@
	924	-stripping ) [[ "$STRIP" = "n" ]] && continue ;;
[6821737]	925	esac
	926
[4795dfb]	927	+ # Install paco as the first package in ch6, before installing
	928	+ # linux-libc-headers, except in iterartive builds
	929	+ if [[ -z "$N" ]]; then
	930	+ case $this_script in
[9b09518]	931	+ *linux-headers)
[799b0d1]	932	+ TMP_SCRIPT="$this_script"
[9b09518]	933	+ this_script=`echo $this_script \| sed -e 's/linux-headers/a-paco/'`
[799b0d1]	934	+ wrt_paco_inst "$this_script"
	935	+ this_script="$TMP_SCRIPT" ;;
[4795dfb]	936	+ esac
	937	+ fi
[6821737]	938	+
[4795dfb]	939	# Grab the name of the target
	940	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
	941
[7bf2fdd]	942	@@ -355,7 +374,9 @@
[daa9b6c]	943	wrt_RunAsRoot "${this_script}" "${file}"
[059822c]	944	;;
	945	*) # The rest of Chapter06
	946	+ wrt_paco_prep
	947	wrt_run_as_chroot1 "${this_script}" "${file}"
[2b88404]	948	+ wrt_paco_log "$pkg_tarball"
[059822c]	949	;;
	950	esac
	951	#
[7bf2fdd]	952	@@ -375,6 +396,16 @@
[4795dfb]	953	PREV=${this_script}${N}
	954	# Set system_build envar for iteration targets
	955	system_build=$chapter6
[059822c]	956	+
[6821737]	957	+ # Reinstall paco after the toolchain has been readjusted.
[059822c]	958	+ case "${this_script}" in
[6821737]	959	+ *readjusting)
[799b0d1]	960	+ TMP_SCRIPT="$this_script"
	961	+ this_script=`echo $this_script \| sed -e 's/readjusting/x-paco/'`
	962	+ wrt_paco_inst "$this_script"
	963	+ this_script="$TMP_SCRIPT" ;;
[059822c]	964	+ esac
	965	+
	966	done # end for file in chapter06/*
	967
	968	}
[7bf2fdd]	969	@@ -433,9 +464,19 @@
[b9ec725]	970	else # Initialize the log and run the script
[059822c]	971	wrt_run_as_chroot2 "${this_script}" "${file}"
	972	fi
[b9ec725]	973	+ wrt_paco_log "hlfs-sysconf"
[059822c]	974	;;
	975	+ *kernel) wrt_paco_prep
	976	+ wrt_run_as_chroot2 "$this_script" "$file"
[2b88404]	977	+ wrt_paco_log "$(get_package_tarball_name "linux")"
[059822c]	978	+ ;;
	979	+ *bootscripts) wrt_paco_prep
	980	+ wrt_run_as_chroot2 "$this_script" "$file"
[2b88404]	981	+ wrt_paco_log "$(get_package_tarball_name "lfs-bootscripts")"
[059822c]	982	+ ;;
	983	*) # All other scripts
	984	wrt_run_as_chroot2 "${this_script}" "${file}"
[b9ec725]	985	+ wrt_paco_log "hlfs-sysconf"
[059822c]	986	;;
[b9ec725]	987	esac
	988
[d748b31]	989	Index: master.sh
	990	===================================================================
[7bf2fdd]	991	--- master.sh (revision 3007)
[d748b31]	992	+++ master.sh (working copy)
[7bf2fdd]	993	@@ -71,6 +71,11 @@
	994	FARCELOGDIR=$LOGDIR/farce
	995	XSL=$PROGNAME.xsl
	996	PKG_LST=unpacked
	997	+ #--- PACO variables
	998	+ PACO_INCLUDE=/
	999	+ PACO_EXCLUDE=/${SCRIPT_ROOT}
	1000	+ PACO_TMPFILE=/tmp/paco.tmp
	1001	+ LD_PRELOAD=/usr/lib/libpaco-log.so
	1002
	1003	case $PROGNAME in
	1004	clfs2) LFSVRS=development; TREE=branches/clfs-2.0/BOOK ;;
	1005	@@ -122,6 +127,7 @@
	1006	VIMLANG=${VIMLANG:-n}
	1007	KEYMAP=${KEYMAP:=none}
	1008	GRSECURITY_HOST=${GRSECURITY_HOST:-n}
	1009	+ USE_PACO=${USE_PACO:-n}
	1010
	1011	else
	1012	#
	1013	@@ -230,6 +236,8 @@
[d748b31]	1014
	1015	--help \| -h ) usage \| more && exit ;;
	1016
[7bf2fdd]	1017	+ --no-paco ) USE_PACO=n ;;
[d748b31]	1018	+
[f3ae556]	1019	--optimize \| -O )
[d748b31]	1020	test $# = 1 && eval "$exit_missing_arg"
	1021	shift
[7bf2fdd]	1022	@@ -468,6 +476,14 @@
[d29584b]	1023	[[ $VERBOSITY > 0 ]] && echo "OK"
	1024	fi
[f3ae556]	1025	#
[d29584b]	1026	+# paco module
[7bf2fdd]	1027	+if [[ "$USE_PACO" = "y" ]]; then
[d29584b]	1028	+ [[ $VERBOSITY > 0 ]] && echo -n "Loading paco module..."
	1029	+ source $COMMON_DIR/paco-functions
	1030	+ [[ $? > 0 ]] && echo "$COMMON_DIR/paco-functions did not load.." && exit 2
	1031	+ [[ $VERBOSITY > 0 ]] && echo "OK"
	1032	+fi
	1033	+#
[f3ae556]	1034	# optimize module
	1035	if [[ "$OPTIMIZE" != "0" ]]; then
	1036	[[ $VERBOSITY > 0 ]] && echo -n "Loading optimization module..."
[7bf2fdd]	1037	@@ -514,6 +530,8 @@
[d748b31]	1038	if [[ "$PWD" != "$JHALFSDIR" ]]; then
[b9ec725]	1039	cp $COMMON_DIR/{makefile-functions,progress_bar.sh} $JHALFSDIR/
[c665386]	1040	#
[7bf2fdd]	1041	+ [[ $USE_PACO != "n" ]] && cp $COMMON_DIR/paco-build-$PROGNAME.sh $JHALFSDIR/
[8230977]	1042	+ #
[f3ae556]	1043	[[ "$OPTIMIZE" != "0" ]] && cp optimize/opt_override $JHALFSDIR/
[c665386]	1044	#
[7bf2fdd]	1045	if [[ "$COMPARE" = "y" ]]; then
	1046	Index: Config.in
	1047	===================================================================
	1048	--- Config.in (revision 3007)
	1049	+++ Config.in (working copy)
	1050	@@ -655,6 +655,52 @@
	1051	#--- End Advanced Features
	1052	endmenu
	1053
	1054	+#--- PACO
	1055	+config USE_PACO
	1056	+ bool "Use PACO"
	1057	+ default n
	1058	+ depends on !BOOK_BLFS && !BOOK_CLFS2 && !LIB_UCLIBC
	1059	+
	1060	+ config PACO_VERSION
	1061	+ string "PACO package version"
	1062	+ default "1.10.10"
	1063	+ depends USE_PACO
	1064	+
	1065	+ config PACO_FILE
	1066	+ string "PACO package full name"
	1067	+ default "paco-$PACO_VERSION.tar.bz2"
	1068	+ depends USE_PACO
	1069	+ help
	1070	+ #-- You can use .tar.gz if preferred
	1071	+
	1072	+ config PACO_MIRROR1
	1073	+ string "Sourceforge mirror 1"
	1074	+ default "heanet"
	1075	+ depends USE_PACO
	1076	+ help
	1077	+ #-- Sourceforge mirror to use for Paco source download
	1078	+ #
	1079	+ # Europe: heanet, belnet, puzzle, surfnet, switch, kent
	1080	+ # North America: superb-east, superb-west, umn, easynews
	1081	+ # South America: ufpr
	1082	+ # Asia: nchc, jaist
	1083	+ # Australia: optusnet
	1084	+
	1085	+ config PACO_MIRROR2
	1086	+ string "Sourceforge mirror 2"
	1087	+ default "kent"
	1088	+ depends USE_PACO
	1089	+ help
	1090	+ #-- Sourceforge mirror to use for Paco source download
	1091	+ #
	1092	+ # Europe: heanet, belnet, puzzle, surfnet, switch, kent
	1093	+ # North America: superb-east, superb-west, umn, easynews
	1094	+ # South America: ufpr
	1095	+ # Asia: nchc, jaist
	1096	+ # Australia: optusnet
	1097	+#--- End PACO
	1098	+
	1099	+
	1100	# config CONFIG_BLFS_CMDS
	1101	# bool "Add BLFS packages to current build"
	1102	# default n

Note: See TracBrowser for help on using the repository browser.

Download in other formats: