Context Navigation

source: contrib/jhalfs-paco.patch@ b1ea9bb

1.0 2.3 2.3.x 2.4 ablfs ablfs-more legacy new_features trunk

Last change on this file since b1ea9bb was b1ea9bb, checked in by Manuel Canales Esparcia <manuel@…>, 18 years ago
Rediffied paco patch.
Property mode set to `100644`
File size: 21.9 KB

Rev	Line
[059822c]	1	Index: LFS/master.sh
	2	===================================================================
[b1ea9bb]	3	--- LFS/master.sh (revision 2743)
[059822c]	4	+++ LFS/master.sh (working copy)
[8230977]	5	@@ -173,6 +173,11 @@
	6	# Keep the script file name
	7	this_script=`basename $file`
	8
	9	+ # If $this_script corresponds to a paco script, then skip it
	10	+ case "${this_script}" in
	11	+ *paco) continue ;;
	12	+ esac
	13	+
	14	# We'll run the chroot commands differently than the others, so skip them in the
	15	# dependencies and target creation.
	16	case "${this_script}" in
	17	@@ -180,6 +185,18 @@
[6821737]	18	stripping) [[ "${STRIP}" = "0" ]] && continue ;;
	19	esac
	20
[4795dfb]	21	+ # Install paco as the first package in ch6, before installing
	22	+ # linux-libc-headers, except in iterartive builds
	23	+ if [[ -z "$N" ]]; then
	24	+ case $this_script in
	25	+ *linux-libc-headers)
[799b0d1]	26	+ TMP_SCRIPT="$this_script"
	27	+ this_script=`echo $this_script \| sed -e 's/linux-libc-headers/a-paco/'`
	28	+ wrt_paco_inst "$this_script"
	29	+ this_script="$TMP_SCRIPT" ;;
[4795dfb]	30	+ esac
	31	+ fi
[6821737]	32	+
[4795dfb]	33	# Grab the name of the target
	34	name=`echo ${this_script} \| sed -e 's@[0-9]\{3\}-@@'`
	35
[8230977]	36	@@ -223,7 +240,9 @@
[059822c]	37	# and not to use chroot.
	38	case "${this_script}" in
	39	*kernfs) wrt_run_as_root "${this_script}" "$file" ;;
	40	- *) wrt_run_as_chroot1 "${this_script}" "$file" ;;
	41	+ *) wrt_paco_prep
	42	+ wrt_run_as_chroot1 "${this_script}" "$file"
	43	+ wrt_paco_log "$name" "$vrs" ;;
	44	esac
	45
	46	# Remove the build directory(ies) except if the package build fails.
[8230977]	47	@@ -243,6 +262,16 @@
[4795dfb]	48	PREV=${this_script}${N}
	49	# Set system_build envar for iteration targets
	50	system_build=$chapter6
[059822c]	51	+
[6821737]	52	+ # Reinstalling paco after readsjusting the toolchain.
[059822c]	53	+ case "${this_script}" in
[6821737]	54	+ *readjusting)
[799b0d1]	55	+ TMP_SCRIPT="$this_script"
	56	+ this_script=`echo ${this_script} \| sed -e 's/readjusting/x-paco/'`
	57	+ wrt_paco_inst "$this_script"
	58	+ this_script="$TMP_SCRIPT" ;;
[059822c]	59	+ esac
	60	+
	61	done # end for file in chapter06/*
	62	}
	63
[b9ec725]	64	@@ -303,8 +332,18 @@
	65	else
[059822c]	66	wrt_run_as_chroot2 "$this_script" "$file"
	67	fi
[b9ec725]	68	+ wrt_paco_log "lfs-sysconf"
[059822c]	69	;;
	70	+ *kernel) wrt_paco_prep
	71	+ wrt_run_as_chroot2 "$this_script" "$file"
	72	+ wrt_paco_log "linux-kernel" "$vrs"
	73	+ ;;
	74	+ *bootscripts) wrt_paco_prep
	75	+ wrt_run_as_chroot2 "$this_script" "$file"
	76	+ wrt_paco_log "lfs-bootscripts" "$vrs"
	77	+ ;;
	78	*) wrt_run_as_chroot2 "$this_script" "$file"
[b9ec725]	79	+ wrt_paco_log "lfs-sysconf"
[059822c]	80	;;
	81	esac
[b9ec725]	82
[059822c]	83	Index: LFS/lfs.xsl
	84	===================================================================
[b1ea9bb]	85	--- LFS/lfs.xsl (revision 2743)
[059822c]	86	+++ LFS/lfs.xsl (working copy)
	87	@@ -32,6 +32,9 @@
	88	<!-- Locale settings -->
	89	<xsl:param name="lang" select="en_CA"/>
	90
	91	+ <!-- Use paco? -->
	92	+ <xsl:param name="use_paco" select="1"/>
	93	+
	94	<xsl:template match="/">
	95	<xsl:apply-templates select="//sect1"/>
	96	</xsl:template>
	97	@@ -190,6 +193,33 @@
	98	<xsl:apply-templates/>
	99	<xsl:text> \|\| true </xsl:text>
	100	</xsl:when>
	101	+ <!-- paco begin -->
	102	+ <!-- General rule -->
	103	+ <xsl:when test="$use_paco != '0' and
	104	+ ancestor::chapter[@id != 'chapter-temporary-tools'] and
	105	+ contains(string(),'make') and
	106	+ contains(string(),'install')">
	107	+ <xsl:text>export LD_PRELOAD=/usr/lib/libpaco-log.so </xsl:text>
	108	+ <xsl:apply-templates/>
	109	+ <xsl:text> </xsl:text>
	110	+ </xsl:when>
	111	+ <!-- Linux-libc-headers -->
	112	+ <xsl:when test="$use_paco != '0' and
	113	+ ancestor::sect1[@id='ch-system-linux-libc-headers'] and
	114	+ contains(string(),'install ')">
	115	+ <xsl:text>export LD_PRELOAD=/usr/lib/libpaco-log.so </xsl:text>
	116	+ <xsl:apply-templates/>
	117	+ <xsl:text> </xsl:text>
	118	+ </xsl:when>
	119	+ <!-- Unset LD_PRELOAD before second make in Zlib -->
	120	+ <xsl:when test="$use_paco != '0' and
	121	+ ancestor::sect1[@id='ch-system-zlib'] and
	122	+ contains(string(),'make clean')">
	123	+ <xsl:text>unset LD_PRELOAD </xsl:text>
	124	+ <xsl:apply-templates/>
	125	+ <xsl:text> </xsl:text>
	126	+ </xsl:when>
	127	+ <!-- paco end -->
	128	<!-- The rest of commands -->
	129	<xsl:otherwise>
	130	<xsl:apply-templates/>
[799b0d1]	131	Index: common/paco-build-hlfs.sh
	132	===================================================================
	133	--- common/paco-build-hlfs.sh (revision 0)
	134	+++ common/paco-build-hlfs.sh (revision 0)
[b9ec725]	135	@@ -0,0 +1,12 @@
[799b0d1]	136	+#!/bin/sh
	137	+set -e
	138	+
	139	+cd $PKGDIR
[b9ec725]	140	+./configure --sysconfdir=/etc \
	141	+ --enable-scripts \
[799b0d1]	142	+ --disable-gpaco \
[b9ec725]	143	+ --disable-static \
	144	+ --with-pic &&
[799b0d1]	145	+make &&
	146	+make install &&
	147	+make logme
[059822c]	148	Index: common/config
	149	===================================================================
[b1ea9bb]	150	--- common/config (revision 2743)
[059822c]	151	+++ common/config (working copy)
[8230977]	152	@@ -84,6 +84,14 @@
[4795dfb]	153	#--- Run farce testing 0(no)/1(yes)
	154	RUN_FARCE=0
[d748b31]	155
[059822c]	156	+#==== PACO VARIABLES ====
[4795dfb]	157	+#--- Use paco? 0(no)/1(yes)
[059822c]	158	+USE_PACO=1
[b9ec725]	159	+PACO_VERSION=1.10.8
[059822c]	160	+
	161	+#--- Name of the Paco source package
	162	+PACO_FILE=paco-$PACO_VERSION.tar.*
	163	+
[4795dfb]	164	#==== INTERNAL VARIABLES ====
	165	# Don't edit it unless you know what you are doing
	166
[b1ea9bb]	167	@@ -100,3 +108,9 @@
[4795dfb]	168
	169	#--- farce report log directory
	170	FARCELOGDIR=$LOGDIR/farce
	171	+
	172	+#--- Variables needed by paco
[059822c]	173	+PACO_INCLUDE=/
[b9ec725]	174	+PACO_EXCLUDE=/jhalfs
[059822c]	175	+PACO_TMPFILE=/tmp/paco.tmp
	176	+LD_PRELOAD=/usr/lib/libpaco-log.so
	177	Index: common/func_validate_configs.sh
	178	===================================================================
[b1ea9bb]	179	--- common/func_validate_configs.sh (revision 2743)
[059822c]	180	+++ common/func_validate_configs.sh (working copy)
[8230977]	181	@@ -84,9 +84,9 @@
[059822c]	182	inline_doc
	183
	184	# First internal variables, then the ones that change the book's flavour, and lastly system configuration variables
[f358747]	185	- local -r hlfs_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE GETPKG RUNMAKE MODEL GRSECURITY_HOST TEST OPTIMIZE REPORT COMPARE RUN_ICA RUN_FARCE ITERATIONS STRIP FSTAB CONFIG GETKERNEL KEYMAP PAGE TIMEZONE LANG LC_ALL"
	186	- local -r clfs_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE GETPKG RUNMAKE METHOD ARCH TARGET TEST OPTIMIZE REPORT COMPARE RUN_ICA RUN_FARCE ITERATIONS STRIP FSTAB BOOT_CONFIG CONFIG GETKERNEL KEYMAP VIMLANG PAGE TIMEZONE LANG"
	187	- local -r lfs_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE GETPKG RUNMAKE TEST OPTIMIZE REPORT COMPARE RUN_ICA RUN_FARCE ITERATIONS STRIP FSTAB CONFIG GETKERNEL VIMLANG PAGE TIMEZONE LANG"
	188	+ local -r hlfs_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE USE_PACO GETPKG RUNMAKE MODEL GRSECURITY_HOST TEST OPTIMIZE REPORT COMPARE RUN_ICA RUN_FARCE ITERATIONS STRIP FSTAB CONFIG GETKERNEL KEYMAP PAGE TIMEZONE LANG LC_ALL"
	189	+ local -r clfs_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE USE_PACO GETPKG RUNMAKE METHOD ARCH TARGET TEST OPTIMIZE REPORT COMPARE RUN_ICA RUN_FARCE ITERATIONS STRIP FSTAB BOOT_CONFIG CONFIG GETKERNEL KEYMAP VIMLANG PAGE TIMEZONE LANG"
	190	+ local -r lfs_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE USE_PACO GETPKG RUNMAKE TEST OPTIMIZE REPORT COMPARE RUN_ICA RUN_FARCE ITERATIONS STRIP FSTAB CONFIG GETKERNEL VIMLANG PAGE TIMEZONE LANG"
[059822c]	191
	192	local -r ERROR_MSG_pt1='The variable \"${L_arrow}${config_param}${R_arrow}\" value ${L_arrow}${BOLD}${!config_param}${R_arrow} is invalid,'
	193	local -r ERROR_MSG_pt2=' check the config file ${BOLD}${GREEN}\<$(echo $PROGNAME \| tr [a-z] [A-Z])/config\> or \<common/config\>${OFF}'
[f358747]	194	@@ -176,6 +176,7 @@
	195	[[ "$GETPKG" = "1" ]] && validate_against_str "x0x x1x"
	196	fi ;;
[4795dfb]	197	RUNMAKE) validate_against_str "x0x x1x" ;;
	198	+ USE_PACO) validate_against_str "x0x x1x" ;;
	199	REPORT) validate_against_str "x0x x1x"
	200	if [[ "${!config_param}" = "1" ]]; then
	201	if [[ `type -p bc` ]]; then
[059822c]	202	Index: common/paco-functions
	203	===================================================================
	204	--- common/paco-functions (revision 0)
	205	+++ common/paco-functions (revision 0)
[b9ec725]	206	@@ -0,0 +1,211 @@
[059822c]	207	+#!/bin/bash
	208	+
	209	+#----------------------------#
	210	+wrt_paco_inst() { #
	211	+#----------------------------#
[d748b31]	212	+
	213	+# Not using Paco with uClibc, even if requested
	214	+if [ $PROGNAME = "hlfs" ]; then
	215	+ if [ $MODEL = "uclibc" ]; then
[6821737]	216	+ USE_PACO=0
[d748b31]	217	+ fi
	218	+fi
	219	+
	220	+if [ $USE_PACO != 0 ]; then
[6821737]	221	+ paco_script="$1"
	222	+ paco_file="chapter06/$paco_script"
	223	+ chapter6="$chapter6 $paco_script"
	224	+
	225	+ # Copy the paco build script to the correct directory and make it executable
[799b0d1]	226	+ cp $JHALFSDIR/paco-build-$PROGNAME.sh $JHALFSDIR/${PROGNAME}-commands/$paco_file &&
[6821737]	227	+ chmod +x $JHALFSDIR/${PROGNAME}-commands/$paco_file
[059822c]	228	+
	229	+ # Write target, dependency and unpack
[6821737]	230	+ wrt_target "$paco_script" "$PREV"
[059822c]	231	+ wrt_unpack2 "$PACO_FILE"
	232	+
	233	+ # Run the script
[6821737]	234	+ wrt_run_as_chroot1 "${paco_script}" "${paco_file}"
[059822c]	235	+
	236	+ # Clean up
[6821737]	237	+ wrt_remove_build_dirs "paco"
[059822c]	238	+ echo -e '\t@touch $@' >> $MKFILE.tmp
	239	+
	240	+ # Override the PREV variable
[6821737]	241	+ PREV="$paco_script"
[059822c]	242	+fi
	243	+}
	244	+
	245	+
	246	+#----------------------------------#
	247	+wrt_paco_prep() { # Export Paco variables
	248	+#----------------------------------# and remove tmpfile
[d748b31]	249	+
	250	+# Not using Paco with uClibc, even if requested
	251	+if [ $PROGNAME = "hlfs" ]; then
	252	+ if [ $MODEL = "uclibc" ]; then
[6821737]	253	+ USE_PACO=0
[d748b31]	254	+ fi
	255	+fi
	256	+
[b9ec725]	257	+check_log_package
	258	+
	259	+if [ $USE_PACO != 0 ] && [ $LOG_PACKAGE != 0 ]; then
[059822c]	260	+(
	261	+cat << EOF
	262	+ @echo "export PACO_INCLUDE=$PACO_INCLUDE" >> envars && \\
[b9ec725]	263	+ echo "export PACO_EXCLUDE=\$(SRC):$PACO_EXCLUDE" >> envars && \\
[059822c]	264	+ echo "export PACO_TMPFILE=$PACO_TMPFILE" >> envars && \\
	265	+ rm -f \$(MOUNT_PT)$PACO_TMPFILE
	266	+EOF
	267	+) >> $MKFILE.tmp
	268	+fi
	269	+}
	270	+
	271	+
	272	+#----------------------------------#
	273	+wrt_paco_log() { # If the tmpfile exist, then log the current package
	274	+#----------------------------------# and remove tempfile
[d748b31]	275	+local PACKAGE
	276	+
	277	+# Allow packages to be logged without version
	278	+if [[ $2 != "" ]] ; then
	279	+ PACKAGE="$1-$2";
	280	+else
	281	+ PACKAGE="$1"
	282	+fi
[059822c]	283	+
[d748b31]	284	+# Not using Paco with uClibc, even if requested
	285	+if [ $PROGNAME = "hlfs" ]; then
	286	+ if [ $MODEL = "uclibc" ]; then
[6821737]	287	+ USE_PACO=0
[059822c]	288	+ fi
[d748b31]	289	+fi
[059822c]	290	+
[b9ec725]	291	+check_log_package
	292	+
	293	+if [ $USE_PACO != 0 ]; then
	294	+ if [ $LOG_PACKAGE != 0 ]; then
[059822c]	295	+(
	296	+cat << EOF
	297	+ @if [ -e \$(MOUNT_PT)$PACO_TMPFILE ]; then \\
[4795dfb]	298	+ \$(CHROOT1) 'paco -lp+ $PACKAGE < $PACO_TMPFILE' && \\
[059822c]	299	+ rm -f \$(MOUNT_PT)$PACO_TMPFILE; \\
	300	+ fi;
	301	+EOF
	302	+) >> $MKFILE.tmp
[b9ec725]	303	+ fi
	304	+ wrt_paco_add_log
[059822c]	305	+fi
[b9ec725]	306	+}
[059822c]	307	+
[b9ec725]	308	+
	309	+#----------------------------------#
	310	+wrt_paco_add_log() { #
	311	+#----------------------------------#
	312	+# Some packages create files using bash redirection, which the LD_PRELOAD lib don't notice
	313	+# These rules will add the missing files to the proper logs.
	314	+# Most of these is not needed for HLFS, but they do no harm.
	315	+if [ $USE_PACO != 0 ]; then
	316	+ case $this_script in
	317	+ *glibc)
	318	+ echo -e "\t@\$(CHROOT1) 'find /lib -type l \| paco -lp+ $PACKAGE'" >> $MKFILE.tmp
	319	+ echo -e "\t@\$(CHROOT1) 'find /etc/{nsswitch.conf,ld.so.conf} \| paco -lp+ $PACKAGE'" >> $MKFILE.tmp
	320	+ ;;
	321	+ *ncurses)
	322	+ LIBS="/usr/lib/{libcurses.so,libncurses.so,libform.so,libpanel.so,libmenu.so}"
	323	+ echo -e "\t@\$(CHROOT1) 'find $LIBS \| paco -lp+ $PACKAGE'" >> $MKFILE.tmp
	324	+ ;;
	325	+ *bash)
	326	+ echo -e "\t@\$(CHROOT1) 'echo /bin/sh \| paco -lp+ $PACKAGE'" >> $MKFILE.tmp
	327	+ ;;
	328	+ *flex)
	329	+ echo -e "\t@\$(CHROOT1) 'echo /usr/bin/lex \| paco -lp+ $PACKAGE'" >> $MKFILE.tmp
	330	+ ;;
	331	+ *shadow)
	332	+ echo -e "\t@\$(CHROOT1) 'echo /etc/login.defs \| paco -lp+ $PACKAGE'" >> $MKFILE.tmp
	333	+ ;;
	334	+ *hotplug)
	335	+ echo -e "\t@\$(CHROOT1) 'echo /var/log/hotplug \| paco -lp+ $PACKAGE'" >> $MKFILE.tmp
	336	+ echo -e "\t@\$(CHROOT1) 'echo /var/run/usb \| paco -lp+ $PACKAGE'" >> $MKFILE.tmp
	337	+ ;;
	338	+ *sysklogd)
	339	+ echo -e "\t@\$(CHROOT1) 'echo /etc/syslog.conf \| paco -lp+ $PACKAGE'" >> $MKFILE.tmp
	340	+ ;;
	341	+ *sysvinit)
	342	+ echo -e "\t@\$(CHROOT1) 'echo /etc/inittab \| paco -lp+ $PACKAGE'" >> $MKFILE.tmp
	343	+ ;;
	344	+ *udev)
	345	+ echo -e "\t@\$(CHROOT1) 'find /lib/udev/devices \| paco -lp+ $PACKAGE'" >> $MKFILE.tmp
	346	+ echo -e "\t@\$(CHROOT1) 'echo /lib/firmware \| paco -lp+ $PACKAGE'" >> $MKFILE.tmp
	347	+ echo -e "\t@\$(CHROOT1) 'find /etc/udev/rules.d -type f \| paco -lp+ $PACKAGE'" >> $MKFILE.tmp
	348	+ ;;
	349	+ *util-linux)
	350	+ echo -e "\t@\$(CHROOT1) 'echo /var/lib/hwclock \| paco -lp+ $PACKAGE'" >> $MKFILE.tmp
	351	+ echo -e "\t@\$(CHROOT1) 'echo /etc/nologin.txt \| paco -lp+ $PACKAGE'" >> $MKFILE.tmp
	352	+ ;;
	353	+ *vim)
	354	+ echo -e "\t@\$(CHROOT1) 'echo /etc/vimrc \| paco -lp+ $PACKAGE'" >> $MKFILE.tmp
	355	+ ;;
	356	+ # Rules below here will log configuration files created in LFS and HLFS
	357	+ # They will end up in a log named {h}lfs-sysconf
	358	+ *setclock)
	359	+ echo -e "\t@\$(CHROOT2) 'echo /etc/sysconfig/clock \| paco -lp+ $PACKAGE'" >> $MKFILE.tmp
	360	+ ;;
	361	+ *inputrc)
	362	+ echo -e "\t@\$(CHROOT2) 'echo /etc/inputrc \| paco -lp+ $PACKAGE'" >> $MKFILE.tmp
	363	+ ;;
	364	+ *profile)
	365	+ echo -e "\t@\$(CHROOT2) 'echo /etc/profile \| paco -lp+ $PACKAGE'" >> $MKFILE.tmp
	366	+ ;;
	367	+ *hostname)
	368	+ echo -e "\t@\$(CHROOT2) 'echo /etc/sysconfig/network \| paco -lp+ $PACKAGE'" >> $MKFILE.tmp
	369	+ ;;
	370	+ *localnet)
	371	+ echo -e "\t@\$(CHROOT2) 'echo /etc/sysconfig/network \| paco -lp+ $PACKAGE'" >> $MKFILE.tmp
	372	+ ;;
	373	+ *hosts)
	374	+ echo -e "\t@\$(CHROOT2) 'echo /etc/hosts \| paco -lp+ $PACKAGE'" >> $MKFILE.tmp
	375	+ ;;
	376	+ *network)
	377	+ echo -e "\t@\$(CHROOT2) 'echo /etc/sysconfig/network-devices/ifconfig.eth0/ipv4 \| paco -lp+ $PACKAGE'" >> $MKFILE.tmp
	378	+ echo -e "\t@\$(CHROOT2) 'echo /etc/resolv.conf \| paco -lp+ $PACKAGE'" >> $MKFILE.tmp
	379	+ ;;
	380	+ *fstab)
	381	+ echo -e "\t@\$(CHROOT2) 'echo /etc/fstab \| paco -lp+ $PACKAGE'" >> $MKFILE.tmp
	382	+ ;;
	383	+ *theend) # LFS
	384	+ echo -e "\t@\$(CHROOT2) 'echo /etc/$PROGNAME-release \| paco -lp+ $PACKAGE'" >> $MKFILE.tmp
	385	+ ;;
	386	+ *finished) # HLFS
	387	+ echo -e "\t@\$(CHROOT2) 'echo /etc/$PROGNAME-release \| paco -lp+ $PACKAGE'" >> $MKFILE.tmp
	388	+ ;;
	389	+ esac
[059822c]	390	+fi
	391	+}
[b9ec725]	392	+
	393	+
	394	+#----------------------------------#
	395	+check_log_package() { #
	396	+#----------------------------------#
	397	+# Maybe don't need this function, but it will avoid writing some
	398	+# unnecessary paco commands in the Makefile.
	399	+
	400	+case $this_script in
	401	+ *creatingdirs) LOG_PACKAGE=0 ;;
	402	+ *createfiles) LOG_PACKAGE=0 ;;
	403	+ *strippingagain) LOG_PACKAGE=0 ;;
	404	+ *readjusting) LOG_PACKAGE=0 ;;
	405	+ *setclock) LOG_PACKAGE=0 ;;
	406	+ *inputrc) LOG_PACKAGE=0 ;;
	407	+ *profile) LOG_PACKAGE=0 ;;
	408	+ *hostname) LOG_PACKAGE=0 ;;
	409	+ *localnet) LOG_PACKAGE=0 ;;
	410	+ *hosts) LOG_PACKAGE=0 ;;
	411	+ *network) LOG_PACKAGE=0 ;;
	412	+ *fstab) LOG_PACKAGE=0 ;;
	413	+ *theend) LOG_PACKAGE=0 ;;
	414	+ *finished) LOG_PACKAGE=0 ;;
	415	+ *) LOG_PACKAGE=1 ;;
	416	+esac
	417	+}
[799b0d1]	418	Index: common/paco-build-lfs.sh
[6821737]	419	===================================================================
[799b0d1]	420	--- common/paco-build-lfs.sh (revision 0)
	421	+++ common/paco-build-lfs.sh (revision 0)
[b9ec725]	422	@@ -0,0 +1,10 @@
[6821737]	423	+#!/bin/sh
	424	+set -e
	425	+
	426	+cd $PKGDIR
[b9ec725]	427	+./configure --sysconfdir=/etc \
	428	+ --enable-scripts \
	429	+ --disable-gpaco &&
[6821737]	430	+make &&
	431	+make install &&
	432	+make logme
[059822c]	433	Index: common/common-functions
	434	===================================================================
[b1ea9bb]	435	--- common/common-functions (revision 2743)
[059822c]	436	+++ common/common-functions (working copy)
[d29584b]	437	@@ -65,6 +65,9 @@
[059822c]	438	in the configuration file has the proper packages and patches for the
	439	book version being processed.
	440
	441	+${BOLD} --no-paco${OFF}
	442	+ dissables paco logging feature.
	443	+
[f3ae556]	444	${BOLD} -O, --optimize${OFF}
	445	Optimize [0-2]
	446	0 = no optimization
[b1ea9bb]	447	@@ -607,6 +610,7 @@
[059822c]	448	--stringparam lc_all $LC_ALL \
	449	--stringparam keymap $KEYMAP \
	450	--stringparam grsecurity_host $GRSECURITY_HOST \
	451	+ --stringparam use_paco $USE_PACO \
	452	-o ./${PROGNAME}-commands/ $XSL $BOOK/index.xml >>$LOGDIR/$LOG 2>&1
	453	;;
	454	lfs)
[b1ea9bb]	455	@@ -618,6 +622,7 @@
[059822c]	456	--stringparam timezone $TIMEZONE \
	457	--stringparam page $PAGE \
	458	--stringparam lang $LANG \
	459	+ --stringparam use_paco $USE_PACO \
	460	-o ./${PROGNAME}-commands/ $XSL $BOOK/index.xml >>$LOGDIR/$LOG 2>&1
	461	;;
[8230977]	462	*) exit 1 ;;
[059822c]	463	Index: HLFS/hlfs.xsl
	464	===================================================================
[b1ea9bb]	465	--- HLFS/hlfs.xsl (revision 2743)
[059822c]	466	+++ HLFS/hlfs.xsl (working copy)
	467	@@ -39,6 +39,9 @@
	468	<xsl:param name="lang" select="en_CA"/>
	469	<xsl:param name="lc_all" select="en_CA"/>
	470
	471	+ <!-- Use paco? -->
	472	+ <xsl:param name="use_paco" select="1"/>
	473	+
	474	<xsl:template match="/">
	475	<xsl:apply-templates select="//sect1"/>
	476	</xsl:template>
	477	@@ -191,6 +194,10 @@
	478	<!-- Fixing bootscripts installation -->
	479	<xsl:when test="ancestor::sect1[@id='bootable-bootscripts'] and
	480	string() = 'make install'">
	481	+ <!-- inserting LD_PRELOAD before installing bootscripts -->
	482	+ <xsl:if test="$use_paco != '0' and $model != 'uclibc'">
	483	+ <xsl:text>export LD_PRELOAD=/usr/lib/libpaco-log.so </xsl:text>
	484	+ </xsl:if>
	485	<xsl:text>make install </xsl:text>
	486	<xsl:text>cd ../blfs-bootscripts-&blfs-bootscripts-version; </xsl:text>
	487	</xsl:when>
	488	@@ -248,6 +255,25 @@
	489	<xsl:apply-templates/>
	490	<xsl:text> \|\| true </xsl:text>
	491	</xsl:when>
	492	+ <!-- paco begin -->
	493	+ <!-- General rule -->
	494	+ <xsl:when test="$use_paco != '0' and $model != 'uclibc' and
	495	+ ancestor::chapter[@id != 'chapter-temporary-tools'] and
	496	+ contains(string(),'make') and
	497	+ contains(string(),'install')">
	498	+ <xsl:text>export LD_PRELOAD=/usr/lib/libpaco-log.so </xsl:text>
	499	+ <xsl:apply-templates/>
	500	+ <xsl:text> </xsl:text>
	501	+ </xsl:when>
	502	+ <!-- Linux-libc-headers -->
	503	+ <xsl:when test="$use_paco != '0' and $model != 'uclibc' and
	504	+ ancestor::sect1[@id='ch-system-linux-libc-headers'] and
	505	+ contains(string(),'install ')">
	506	+ <xsl:text>export LD_PRELOAD=/usr/lib/libpaco-log.so </xsl:text>
	507	+ <xsl:apply-templates/>
	508	+ <xsl:text> </xsl:text>
	509	+ </xsl:when>
	510	+ <!-- paco end -->
	511	<!-- The rest of commands -->
	512	<xsl:otherwise>
	513	<xsl:apply-templates/>
	514	Index: HLFS/master.sh
	515	===================================================================
[b1ea9bb]	516	--- HLFS/master.sh (revision 2743)
[059822c]	517	+++ HLFS/master.sh (working copy)
[b1ea9bb]	518	@@ -250,6 +250,11 @@
[8230977]	519	# Keep the script file name
	520	this_script=`basename $file`
	521
	522	+ # If this script is *-paco, then skip it
	523	+ case $this_script in
	524	+ *paco ) continue ;;
	525	+ esac
	526	+
	527	# Skip this script depending on jhalfs.conf flags set.
	528	case $this_script in
	529	# We'll run the chroot commands differently than the others, so skip them in the
[b1ea9bb]	530	@@ -259,6 +264,18 @@
[4795dfb]	531	-stripping ) [[ "$STRIP" = "0" ]] && continue ;;
[6821737]	532	esac
	533
[4795dfb]	534	+ # Install paco as the first package in ch6, before installing
	535	+ # linux-libc-headers, except in iterartive builds
	536	+ if [[ -z "$N" ]]; then
	537	+ case $this_script in
	538	+ *linux-libc-headers)
[799b0d1]	539	+ TMP_SCRIPT="$this_script"
	540	+ this_script=`echo $this_script \| sed -e 's/linux-libc-headers/a-paco/'`
	541	+ wrt_paco_inst "$this_script"
	542	+ this_script="$TMP_SCRIPT" ;;
[4795dfb]	543	+ esac
	544	+ fi
[6821737]	545	+
[4795dfb]	546	# Grab the name of the target
	547	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
	548
[b1ea9bb]	549	@@ -329,7 +346,9 @@
[059822c]	550	wrt_run_as_root "${this_script}" "${file}"
	551	;;
	552	*) # The rest of Chapter06
	553	+ wrt_paco_prep
	554	wrt_run_as_chroot1 "${this_script}" "${file}"
	555	+ wrt_paco_log "$name" "$vrs"
	556	;;
	557	esac
	558	#
[b1ea9bb]	559	@@ -362,6 +381,16 @@
[4795dfb]	560	PREV=${this_script}${N}
	561	# Set system_build envar for iteration targets
	562	system_build=$chapter6
[059822c]	563	+
[6821737]	564	+ # Reinstall paco after the toolchain has been readjusted.
[059822c]	565	+ case "${this_script}" in
[6821737]	566	+ *readjusting)
[799b0d1]	567	+ TMP_SCRIPT="$this_script"
	568	+ this_script=`echo $this_script \| sed -e 's/readjusting/x-paco/'`
	569	+ wrt_paco_inst "$this_script"
	570	+ this_script="$TMP_SCRIPT" ;;
[059822c]	571	+ esac
	572	+
	573	done # end for file in chapter06/*
	574
	575	}
[b1ea9bb]	576	@@ -423,9 +452,20 @@
[b9ec725]	577	else # Initialize the log and run the script
[059822c]	578	wrt_run_as_chroot2 "${this_script}" "${file}"
	579	fi
[b9ec725]	580	+ wrt_paco_log "hlfs-sysconf"
[059822c]	581	;;
	582	+ *kernel) wrt_paco_prep
	583	+ wrt_run_as_chroot2 "$this_script" "$file"
	584	+ version=`grep "^linux-version" $JHALFSDIR/packages \| sed -e 's/.* //' -e 's/"//g'`
	585	+ wrt_paco_log "linux-kernel" "$version"
	586	+ ;;
	587	+ *bootscripts) wrt_paco_prep
	588	+ wrt_run_as_chroot2 "$this_script" "$file"
	589	+ wrt_paco_log "hlfs-bootscripts"
	590	+ ;;
	591	*) # All other scripts
	592	wrt_run_as_chroot2 "${this_script}" "${file}"
[b9ec725]	593	+ wrt_paco_log "hlfs-sysconf"
[059822c]	594	;;
[b9ec725]	595	esac
	596
[d748b31]	597	Index: master.sh
	598	===================================================================
[b1ea9bb]	599	--- master.sh (revision 2743)
[d748b31]	600	+++ master.sh (working copy)
[d29584b]	601	@@ -147,6 +147,8 @@
[d748b31]	602
	603	--help \| -h ) usage \| more && exit ;;
	604
	605	+ --no-paco ) USE_PACO=0 ;;
	606	+
[f3ae556]	607	--optimize \| -O )
[d748b31]	608	test $# = 1 && eval "$exit_missing_arg"
	609	shift
[8230977]	610	@@ -438,6 +440,14 @@
[d29584b]	611	[[ $VERBOSITY > 0 ]] && echo "OK"
	612	fi
[f3ae556]	613	#
[d29584b]	614	+# paco module
	615	+if [[ "$USE_PACO" = "1" ]]; then
	616	+ [[ $VERBOSITY > 0 ]] && echo -n "Loading paco module..."
	617	+ source $COMMON_DIR/paco-functions
	618	+ [[ $? > 0 ]] && echo "$COMMON_DIR/paco-functions did not load.." && exit 2
	619	+ [[ $VERBOSITY > 0 ]] && echo "OK"
	620	+fi
	621	+#
[f3ae556]	622	# optimize module
	623	if [[ "$OPTIMIZE" != "0" ]]; then
	624	[[ $VERBOSITY > 0 ]] && echo -n "Loading optimization module..."
[b9ec725]	625	@@ -482,6 +492,9 @@
[da737cb]	626	#
[d748b31]	627	if [[ "$PWD" != "$JHALFSDIR" ]]; then
[b9ec725]	628	cp $COMMON_DIR/{makefile-functions,progress_bar.sh} $JHALFSDIR/
[8230977]	629	+ #
	630	+ [[ $USE_PACO != "0" ]] && cp $COMMON_DIR/paco-build-$PROGNAME.sh $JHALFSDIR/
	631	+ #
[f3ae556]	632	[[ "$OPTIMIZE" != "0" ]] && cp optimize/opt_override $JHALFSDIR/
[4795dfb]	633	if [[ "$COMPARE" != "0" ]] ; then
	634	mkdir -p $JHALFSDIR/extras

Note: See TracBrowser for help on using the repository browser.

Download in other formats: