source: contrib/jhalfs-paco.patch@ cee9568

Index: LFS/master.sh
===================================================================
--- LFS/master.sh       (revision 2752)
+++ LFS/master.sh       (working copy)
@@ -176,6 +176,11 @@
     # Keep the script file name
     this_script=`basename $file`
 
+    # If $this_script corresponds to a paco script, then skip it
+    case "${this_script}" in
+      *paco)       continue ;;
+    esac
+
     # We'll run the chroot commands differently than the others, so skip them in the
     # dependencies and target creation.
     case "${this_script}" in
@@ -183,6 +188,18 @@
       *stripping*) [[ "${STRIP}" = "0" ]] && continue ;;
     esac
 
+    # Install paco as the first package in ch6, before installing
+    # linux-libc-headers, except in iterartive builds
+    if [[ -z "$N" ]]; then
+      case $this_script in
+        *linux-libc-headers)
+          TMP_SCRIPT="$this_script"
+          this_script=`echo $this_script | sed -e 's/linux-libc-headers/a-paco/'`
+          wrt_paco_inst "$this_script"
+          this_script="$TMP_SCRIPT" ;;
+      esac
+    fi
+
     # Grab the name of the target
     name=`echo ${this_script} | sed -e 's@[0-9]\{3\}-@@'`
 
@@ -236,7 +253,9 @@
     # and not to use chroot.
     case "${this_script}" in
       *kernfs)  wrt_run_as_root    "${this_script}" "$file" ;;
-      *)        wrt_run_as_chroot1 "${this_script}" "$file" ;;
+      *)        wrt_paco_prep
+                wrt_run_as_chroot1 "${this_script}" "$file"
+                wrt_paco_log "$name" "$vrs" ;;
     esac
 
     # Remove the build directory(ies) except if the package build fails.
@@ -256,6 +275,16 @@
     PREV=${this_script}${N}
     # Set system_build envar for iteration targets
     system_build=$chapter6
+
+    # Reinstalling paco after readsjusting the toolchain.
+    case "${this_script}" in
+      *readjusting)
+        TMP_SCRIPT="$this_script"
+        this_script=`echo ${this_script} | sed -e 's/readjusting/x-paco/'`
+        wrt_paco_inst "$this_script"
+        this_script="$TMP_SCRIPT" ;;
+    esac
+
   done # end for file in chapter06/*
 }
 
@@ -316,8 +345,18 @@
               else
                 wrt_run_as_chroot2 "$this_script" "$file"
               fi
+              wrt_paco_log "lfs-sysconf"
         ;;
+      *kernel)       wrt_paco_prep
+                     wrt_run_as_chroot2 "$this_script" "$file"
+                     wrt_paco_log "linux-kernel" "$vrs"
+        ;;
+      *bootscripts)  wrt_paco_prep
+                     wrt_run_as_chroot2 "$this_script" "$file"
+                     wrt_paco_log "lfs-bootscripts" "$vrs"
+        ;;
       *)        wrt_run_as_chroot2 "$this_script" "$file"
+                wrt_paco_log "lfs-sysconf"
         ;;
     esac
 
Index: LFS/lfs.xsl
===================================================================
--- LFS/lfs.xsl (revision 2752)
+++ LFS/lfs.xsl (working copy)
@@ -32,6 +32,9 @@
   <!-- Locale settings -->
   <xsl:param name="lang" select="C"/>
 
+  <!-- Use paco? -->
+  <xsl:param name="use_paco" select="1"/>
+
   <xsl:template match="/">
     <xsl:apply-templates select="//sect1"/>
   </xsl:template>
@@ -200,6 +203,33 @@
         <xsl:apply-templates/>
         <xsl:text> || true&#xA;</xsl:text>
       </xsl:when>
+      <!-- paco begin -->
+      <!-- General rule -->
+      <xsl:when test="$use_paco != '0' and
+                ancestor::chapter[@id != 'chapter-temporary-tools'] and
+                contains(string(),'make') and
+                contains(string(),'install')">
+        <xsl:text>export LD_PRELOAD=/usr/lib/libpaco-log.so&#xA;</xsl:text>
+        <xsl:apply-templates/>
+        <xsl:text>&#xA;</xsl:text>
+      </xsl:when>
+      <!-- Linux-libc-headers -->
+      <xsl:when test="$use_paco != '0' and
+                ancestor::sect1[@id='ch-system-linux-libc-headers'] and
+                contains(string(),'install ')">
+        <xsl:text>export LD_PRELOAD=/usr/lib/libpaco-log.so&#xA;</xsl:text>
+        <xsl:apply-templates/>
+        <xsl:text>&#xA;</xsl:text>
+      </xsl:when>
+      <!-- Unset LD_PRELOAD before second make in Zlib -->
+      <xsl:when test="$use_paco != '0' and
+                ancestor::sect1[@id='ch-system-zlib'] and
+                contains(string(),'make clean')">
+        <xsl:text>unset LD_PRELOAD&#xA;</xsl:text>
+        <xsl:apply-templates/>
+        <xsl:text>&#xA;</xsl:text>
+      </xsl:when>
+      <!-- paco end -->
       <!-- The rest of commands -->
       <xsl:otherwise>
         <xsl:apply-templates/>
Index: common/paco-build-hlfs.sh
===================================================================
--- common/paco-build-hlfs.sh   (revision 0)
+++ common/paco-build-hlfs.sh   (revision 0)
@@ -0,0 +1,12 @@
+#!/bin/sh
+set -e
+
+cd $PKGDIR
+./configure --sysconfdir=/etc \
+       --enable-scripts \
+       --disable-gpaco \
+       --disable-static \
+       --with-pic &&
+make &&
+make install &&
+make logme
Index: common/config
===================================================================
--- common/config       (revision 2752)
+++ common/config       (working copy)
@@ -84,6 +84,14 @@
 #--- Run farce testing 0(no)/1(yes)
 RUN_FARCE=0
 
+#==== PACO VARIABLES ====
+#--- Use paco? 0(no)/1(yes)
+USE_PACO=1
+PACO_VERSION=1.10.8
+
+#--- Name of the Paco source package
+PACO_FILE=paco-$PACO_VERSION.tar.*
+
 #==== INTERNAL VARIABLES ====
 # Don't edit it unless you know what you are doing
 
@@ -101,3 +109,9 @@
 
 #--- farce report log directory
 FARCELOGDIR=$LOGDIR/farce
+
+#--- Variables needed by paco
+PACO_INCLUDE=/
+PACO_EXCLUDE=/${SCRIPT_ROOT}
+PACO_TMPFILE=/tmp/paco.tmp
+LD_PRELOAD=/usr/lib/libpaco-log.so
Index: common/func_validate_configs.sh
===================================================================
--- common/func_validate_configs.sh     (revision 2752)
+++ common/func_validate_configs.sh     (working copy)
@@ -84,9 +84,9 @@
 inline_doc
 
   # First internal variables, then the ones that change the book's flavour, and lastly system configuration variables
-  local -r hlfs_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE GETPKG RUNMAKE MODEL GRSECURITY_HOST TEST OPTIMIZE REPORT COMPARE RUN_ICA RUN_FARCE ITERATIONS STRIP FSTAB             CONFIG GETKERNEL KEYMAP         PAGE TIMEZONE LANG LC_ALL"
-  local -r clfs_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE GETPKG RUNMAKE METHOD  ARCH  TARGET  TEST OPTIMIZE REPORT COMPARE RUN_ICA RUN_FARCE ITERATIONS STRIP FSTAB BOOT_CONFIG CONFIG GETKERNEL KEYMAP VIMLANG PAGE TIMEZONE LANG"
-  local -r  lfs_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE GETPKG RUNMAKE                       TEST OPTIMIZE REPORT COMPARE RUN_ICA RUN_FARCE ITERATIONS STRIP FSTAB             CONFIG GETKERNEL        VIMLANG PAGE TIMEZONE LANG"
+  local -r hlfs_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE USE_PACO GETPKG RUNMAKE MODEL GRSECURITY_HOST TEST OPTIMIZE REPORT COMPARE RUN_ICA RUN_FARCE ITERATIONS STRIP FSTAB             CONFIG GETKERNEL KEYMAP         PAGE TIMEZONE LANG LC_ALL"
+  local -r clfs_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE USE_PACO GETPKG RUNMAKE METHOD  ARCH  TARGET  TEST OPTIMIZE REPORT COMPARE RUN_ICA RUN_FARCE ITERATIONS STRIP FSTAB BOOT_CONFIG CONFIG GETKERNEL KEYMAP VIMLANG PAGE TIMEZONE LANG"
+  local -r  lfs_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE USE_PACO GETPKG RUNMAKE                       TEST OPTIMIZE REPORT COMPARE RUN_ICA RUN_FARCE ITERATIONS STRIP FSTAB             CONFIG GETKERNEL        VIMLANG PAGE TIMEZONE LANG"
 
   local -r ERROR_MSG_pt1='The variable \"${L_arrow}${config_param}${R_arrow}\" value ${L_arrow}${BOLD}${!config_param}${R_arrow} is invalid,'
   local -r ERROR_MSG_pt2=' check the config file ${BOLD}${GREEN}\<$(echo $PROGNAME | tr [a-z] [A-Z])/config\> or \<common/config\>${OFF}'
@@ -176,6 +176,7 @@
                     [[ "$GETPKG" = "1" ]] && validate_against_str "x0x x1x"
                   fi ;;
       RUNMAKE)    validate_against_str "x0x x1x" ;;
+      USE_PACO)   validate_against_str "x0x x1x" ;;
       REPORT)     validate_against_str "x0x x1x"
                   if [[ "${!config_param}" = "1" ]]; then
                     if [[ `type -p bc` ]]; then
Index: common/paco-functions
===================================================================
--- common/paco-functions       (revision 0)
+++ common/paco-functions       (revision 0)
@@ -0,0 +1,211 @@
+#!/bin/bash
+
+#----------------------------#
+wrt_paco_inst() {            #
+#----------------------------#
+
+# Not using Paco with uClibc, even if requested
+if [ $PROGNAME = "hlfs" ]; then
+  if [ $MODEL = "uclibc" ]; then
+    USE_PACO=0
+  fi
+fi
+
+if [ $USE_PACO != 0 ]; then
+  paco_script="$1"
+  paco_file="chapter06/$paco_script"
+  chapter6="$chapter6 $paco_script"
+
+  # Copy the paco build script to the correct directory and make it executable
+  cp $JHALFSDIR/paco-build-$PROGNAME.sh $JHALFSDIR/${PROGNAME}-commands/$paco_file &&
+  chmod +x $JHALFSDIR/${PROGNAME}-commands/$paco_file
+
+  # Write target, dependency and unpack
+  wrt_target "$paco_script" "$PREV"
+  wrt_unpack2 "$PACO_FILE"
+
+  # Run the script
+  wrt_run_as_chroot1 "${paco_script}" "${paco_file}"
+
+  # Clean up
+  wrt_remove_build_dirs "paco"
+  echo -e '\t@touch $@' >> $MKFILE.tmp
+
+  # Override the PREV variable
+  PREV="$paco_script"
+fi
+}
+
+
+#----------------------------------#
+wrt_paco_prep() {                  # Export Paco variables
+#----------------------------------# and remove tmpfile
+
+# Not using Paco with uClibc, even if requested
+if [ $PROGNAME = "hlfs" ]; then
+  if [ $MODEL = "uclibc" ]; then
+    USE_PACO=0
+  fi
+fi
+
+check_log_package
+
+if [ $USE_PACO != 0 ] && [ $LOG_PACKAGE != 0 ]; then
+(
+cat  << EOF
+       @echo "export PACO_INCLUDE=$PACO_INCLUDE" >> envars && \\
+       echo "export PACO_EXCLUDE=\$(SRC):$PACO_EXCLUDE" >> envars && \\
+       echo "export PACO_TMPFILE=$PACO_TMPFILE" >> envars && \\
+       rm -f \$(MOUNT_PT)$PACO_TMPFILE
+EOF
+) >> $MKFILE.tmp
+fi
+}
+
+
+#----------------------------------#
+wrt_paco_log() {                   # If the tmpfile exist, then log the current package
+#----------------------------------# and remove tempfile
+local PACKAGE
+
+# Allow packages to be logged without version
+if [[ $2 != "" ]] ; then
+  PACKAGE="$1-$2";
+else
+  PACKAGE="$1"
+fi
+
+# Not using Paco with uClibc, even if requested
+if [ $PROGNAME = "hlfs" ]; then
+  if [ $MODEL = "uclibc" ]; then
+    USE_PACO=0
+  fi
+fi
+
+check_log_package
+
+if [ $USE_PACO != 0 ]; then
+  if [ $LOG_PACKAGE != 0 ]; then
+(
+cat << EOF
+       @if [ -e \$(MOUNT_PT)$PACO_TMPFILE ]; then \\
+               \$(CHROOT1) 'paco -lp+ $PACKAGE < $PACO_TMPFILE' && \\
+               rm -f \$(MOUNT_PT)$PACO_TMPFILE; \\
+       fi;
+EOF
+) >> $MKFILE.tmp
+  fi
+  wrt_paco_add_log
+fi
+}
+
+
+#----------------------------------#
+wrt_paco_add_log() {               #
+#----------------------------------#
+# Some packages create files using bash redirection, which the LD_PRELOAD lib don't notice
+# These rules will add the missing files to the proper logs.
+# Most of these is not needed for HLFS, but they do no harm.
+if [ $USE_PACO != 0 ]; then
+  case $this_script in
+    *glibc)
+      echo -e "\t@\$(CHROOT1) 'find /lib -type l | paco -lp+ $PACKAGE'" >> $MKFILE.tmp
+      echo -e "\t@\$(CHROOT1) 'find /etc/{nsswitch.conf,ld.so.conf} | paco -lp+ $PACKAGE'" >> $MKFILE.tmp
+    ;;
+    *ncurses)
+      LIBS="/usr/lib/{libcurses.so,libncurses.so,libform.so,libpanel.so,libmenu.so}"
+      echo -e "\t@\$(CHROOT1) 'find $LIBS | paco -lp+ $PACKAGE'" >> $MKFILE.tmp
+    ;;
+    *bash)
+      echo -e "\t@\$(CHROOT1) 'echo /bin/sh | paco -lp+ $PACKAGE'" >> $MKFILE.tmp
+    ;;
+    *flex)
+      echo -e "\t@\$(CHROOT1) 'echo /usr/bin/lex | paco -lp+ $PACKAGE'" >> $MKFILE.tmp
+    ;;
+    *shadow)
+      echo -e "\t@\$(CHROOT1) 'echo /etc/login.defs | paco -lp+ $PACKAGE'" >> $MKFILE.tmp
+    ;;
+    *hotplug)
+      echo -e "\t@\$(CHROOT1) 'echo /var/log/hotplug | paco -lp+ $PACKAGE'" >> $MKFILE.tmp
+      echo -e "\t@\$(CHROOT1) 'echo /var/run/usb | paco -lp+ $PACKAGE'" >> $MKFILE.tmp
+    ;;
+    *sysklogd)
+      echo -e "\t@\$(CHROOT1) 'echo /etc/syslog.conf | paco -lp+ $PACKAGE'" >> $MKFILE.tmp
+    ;;
+    *sysvinit)
+      echo -e "\t@\$(CHROOT1) 'echo /etc/inittab | paco -lp+ $PACKAGE'" >> $MKFILE.tmp
+    ;;
+    *udev)
+      echo -e "\t@\$(CHROOT1) 'find /lib/udev/devices | paco -lp+ $PACKAGE'" >> $MKFILE.tmp
+      echo -e "\t@\$(CHROOT1) 'echo /lib/firmware | paco -lp+ $PACKAGE'" >> $MKFILE.tmp
+      echo -e "\t@\$(CHROOT1) 'find /etc/udev/rules.d -type f | paco -lp+ $PACKAGE'" >> $MKFILE.tmp
+    ;;
+    *util-linux)
+      echo -e "\t@\$(CHROOT1) 'echo /var/lib/hwclock | paco -lp+ $PACKAGE'" >> $MKFILE.tmp
+      echo -e "\t@\$(CHROOT1) 'echo /etc/nologin.txt | paco -lp+ $PACKAGE'" >> $MKFILE.tmp
+    ;;
+    *vim)
+      echo -e "\t@\$(CHROOT1) 'echo /etc/vimrc | paco -lp+ $PACKAGE'" >> $MKFILE.tmp
+    ;;
+    # Rules below here will log configuration files created in LFS and HLFS
+    # They will end up in a log named {h}lfs-sysconf
+    *setclock)
+      echo -e "\t@\$(CHROOT2) 'echo /etc/sysconfig/clock | paco -lp+ $PACKAGE'" >> $MKFILE.tmp
+    ;;
+    *inputrc)
+      echo -e "\t@\$(CHROOT2) 'echo /etc/inputrc | paco -lp+ $PACKAGE'" >> $MKFILE.tmp
+    ;;
+    *profile)
+      echo -e "\t@\$(CHROOT2) 'echo /etc/profile | paco -lp+ $PACKAGE'" >> $MKFILE.tmp
+    ;;
+    *hostname)
+      echo -e "\t@\$(CHROOT2) 'echo /etc/sysconfig/network | paco -lp+ $PACKAGE'" >> $MKFILE.tmp
+    ;;
+    *localnet)
+      echo -e "\t@\$(CHROOT2) 'echo /etc/sysconfig/network | paco -lp+ $PACKAGE'" >> $MKFILE.tmp
+    ;;
+    *hosts)
+      echo -e "\t@\$(CHROOT2) 'echo /etc/hosts | paco -lp+ $PACKAGE'" >> $MKFILE.tmp
+    ;;
+    *network)
+      echo -e "\t@\$(CHROOT2) 'echo /etc/sysconfig/network-devices/ifconfig.eth0/ipv4 | paco -lp+ $PACKAGE'" >> $MKFILE.tmp
+      echo -e "\t@\$(CHROOT2) 'echo /etc/resolv.conf | paco -lp+ $PACKAGE'" >> $MKFILE.tmp
+    ;;
+    *fstab)
+      echo -e "\t@\$(CHROOT2) 'echo /etc/fstab | paco -lp+ $PACKAGE'" >> $MKFILE.tmp
+    ;;
+    *theend) # LFS
+      echo -e "\t@\$(CHROOT2) 'echo /etc/$PROGNAME-release | paco -lp+ $PACKAGE'" >> $MKFILE.tmp
+    ;;
+    *finished) # HLFS
+      echo -e "\t@\$(CHROOT2) 'echo /etc/$PROGNAME-release | paco -lp+ $PACKAGE'" >> $MKFILE.tmp
+    ;;
+  esac
+fi
+}
+
+
+#----------------------------------#
+check_log_package() {              #
+#----------------------------------#
+# Maybe don't need this function, but it will avoid writing some
+# unnecessary paco commands in the Makefile.
+
+case $this_script in
+  *creatingdirs)    LOG_PACKAGE=0 ;;
+  *createfiles)     LOG_PACKAGE=0 ;;
+  *strippingagain)  LOG_PACKAGE=0 ;;
+  *readjusting)     LOG_PACKAGE=0 ;;
+  *setclock)        LOG_PACKAGE=0 ;;
+  *inputrc)         LOG_PACKAGE=0 ;;
+  *profile)         LOG_PACKAGE=0 ;;
+  *hostname)        LOG_PACKAGE=0 ;;
+  *localnet)        LOG_PACKAGE=0 ;;
+  *hosts)           LOG_PACKAGE=0 ;;
+  *network)         LOG_PACKAGE=0 ;;
+  *fstab)           LOG_PACKAGE=0 ;;
+  *theend)          LOG_PACKAGE=0 ;;
+  *finished)        LOG_PACKAGE=0 ;;
+  *)                LOG_PACKAGE=1 ;;
+esac
+}
Index: common/paco-build-lfs.sh
===================================================================
--- common/paco-build-lfs.sh    (revision 0)
+++ common/paco-build-lfs.sh    (revision 0)
@@ -0,0 +1,10 @@
+#!/bin/sh
+set -e
+
+cd $PKGDIR
+./configure --sysconfdir=/etc \
+       --enable-scripts \
+       --disable-gpaco &&
+make &&
+make install &&
+make logme
Index: common/common-functions
===================================================================
--- common/common-functions     (revision 2752)
+++ common/common-functions     (working copy)
@@ -65,6 +65,9 @@
         in the configuration file has the proper packages and patches for the
         book version being processed.
 
+${BOLD}  --no-paco${OFF}
+        dissables paco logging feature.
+
 ${BOLD}  -O, --optimize${OFF}
         Optimize [0-2]
           0 = no optimization
@@ -631,6 +634,7 @@
                  --stringparam lc_all $LC_ALL \
                  --stringparam keymap $KEYMAP \
                  --stringparam grsecurity_host $GRSECURITY_HOST \
+                 --stringparam use_paco $USE_PACO \
                  -o ./${PROGNAME}-commands/ $XSL $BOOK/index.xml >>$LOGDIR/$LOG 2>&1
       ;;
     lfs)
@@ -642,6 +646,7 @@
                  --stringparam timezone $TIMEZONE \
                  --stringparam page $PAGE \
                  --stringparam lang $LANG \
+                 --stringparam use_paco $USE_PACO \
                  -o ./${PROGNAME}-commands/ $XSL $BOOK/index.xml >>$LOGDIR/$LOG 2>&1
       ;;
     *) exit 1 ;;
Index: HLFS/hlfs.xsl
===================================================================
--- HLFS/hlfs.xsl       (revision 2752)
+++ HLFS/hlfs.xsl       (working copy)
@@ -39,6 +39,9 @@
   <xsl:param name="lang" select="C"/>
   <xsl:param name="lc_all" select="C"/>
 
+  <!-- Use paco? -->
+  <xsl:param name="use_paco" select="1"/>
+
   <xsl:template match="/">
     <xsl:apply-templates select="//sect1"/>
   </xsl:template>
@@ -191,6 +194,10 @@
       <!-- Fixing bootscripts installation -->
       <xsl:when test="ancestor::sect1[@id='bootable-bootscripts'] and
                 string() = 'make install'">
+        <!-- inserting LD_PRELOAD before installing bootscripts -->
+        <xsl:if test="$use_paco != '0' and $model != 'uclibc'">
+          <xsl:text>export LD_PRELOAD=/usr/lib/libpaco-log.so&#xA;</xsl:text>
+        </xsl:if>
         <xsl:text>make install&#xA;</xsl:text>
         <xsl:text>cd ../blfs-bootscripts-&blfs-bootscripts-version;&#xA;</xsl:text>
       </xsl:when>
@@ -257,6 +264,25 @@
         <xsl:apply-templates/>
         <xsl:text> || true&#xA;</xsl:text>
       </xsl:when>
+      <!-- paco begin -->
+      <!-- General rule -->
+      <xsl:when test="$use_paco != '0' and $model != 'uclibc' and
+                ancestor::chapter[@id != 'chapter-temporary-tools'] and
+                contains(string(),'make') and
+                contains(string(),'install')">
+        <xsl:text>export LD_PRELOAD=/usr/lib/libpaco-log.so&#xA;</xsl:text>
+        <xsl:apply-templates/>
+        <xsl:text>&#xA;</xsl:text>
+      </xsl:when>
+      <!-- Linux-libc-headers -->
+      <xsl:when test="$use_paco != '0' and $model != 'uclibc' and
+                ancestor::sect1[@id='ch-system-linux-libc-headers'] and
+                contains(string(),'install ')">
+        <xsl:text>export LD_PRELOAD=/usr/lib/libpaco-log.so&#xA;</xsl:text>
+        <xsl:apply-templates/>
+        <xsl:text>&#xA;</xsl:text>
+      </xsl:when>
+      <!-- paco end -->
       <!-- The rest of commands -->
       <xsl:otherwise>
         <xsl:apply-templates/>
Index: HLFS/master.sh
===================================================================
--- HLFS/master.sh      (revision 2752)
+++ HLFS/master.sh      (working copy)
@@ -253,6 +253,11 @@
     # Keep the script file name
     this_script=`basename $file`
 
+    # If this script is *-paco, then skip it
+    case $this_script in
+      *paco )     continue ;;
+    esac
+
     # Skip this script depending on jhalfs.conf flags set.
     case $this_script in
         # We'll run the chroot commands differently than the others, so skip them in the
@@ -262,6 +267,18 @@
       *-stripping* )  [[ "$STRIP" = "0" ]] && continue ;;
     esac
 
+    # Install paco as the first package in ch6, before installing
+    # linux-libc-headers, except in iterartive builds
+    if [[ -z "$N" ]]; then
+      case $this_script in
+        *linux-libc-headers)
+          TMP_SCRIPT="$this_script"
+          this_script=`echo $this_script | sed -e 's/linux-libc-headers/a-paco/'`
+          wrt_paco_inst "$this_script"
+          this_script="$TMP_SCRIPT" ;;
+      esac
+    fi
+
     # Grab the name of the target
     name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@'`
 
@@ -342,7 +359,9 @@
         wrt_run_as_root "${this_script}" "${file}"
         ;;
       *)   # The rest of Chapter06
+        wrt_paco_prep
         wrt_run_as_chroot1 "${this_script}" "${file}"
+        wrt_paco_log "$name" "$vrs"
        ;;
     esac
     #
@@ -375,6 +394,16 @@
     PREV=${this_script}${N}
     # Set system_build envar for iteration targets
     system_build=$chapter6
+
+    # Reinstall paco after the toolchain has been readjusted.
+    case "${this_script}" in
+      *readjusting)
+        TMP_SCRIPT="$this_script"
+        this_script=`echo $this_script | sed -e 's/readjusting/x-paco/'`
+        wrt_paco_inst "$this_script"
+        this_script="$TMP_SCRIPT" ;;
+    esac
+
   done # end for file in chapter06/*
 
 }
@@ -436,9 +465,20 @@
         else  # Initialize the log and run the script
           wrt_run_as_chroot2 "${this_script}" "${file}"
         fi
+        wrt_paco_log "hlfs-sysconf"
         ;;
+      *kernel)       wrt_paco_prep
+                     wrt_run_as_chroot2 "$this_script" "$file"
+                     version=`grep "^linux-version" $JHALFSDIR/packages | sed -e 's/.* //' -e 's/"//g'`
+                     wrt_paco_log "linux-kernel" "$version"
+        ;;
+      *bootscripts)  wrt_paco_prep
+                     wrt_run_as_chroot2 "$this_script" "$file"
+                     wrt_paco_log "hlfs-bootscripts"
+        ;;
       *)  # All other scripts
         wrt_run_as_chroot2 "${this_script}" "${file}"
+        wrt_paco_log "hlfs-sysconf"
         ;;
     esac
 
Index: master.sh
===================================================================
--- master.sh   (revision 2752)
+++ master.sh   (working copy)
@@ -148,6 +148,8 @@
 
     --help | -h )  usage | more && exit  ;;
 
+    --no-paco )            USE_PACO=0    ;;
+
     --optimize | -O )
       test $# = 1 && eval "$exit_missing_arg"
       shift
@@ -439,6 +441,14 @@
   [[ $VERBOSITY > 0 ]] && echo "OK"
 fi
 #
+# paco module
+if [[ "$USE_PACO" = "1" ]]; then
+  [[ $VERBOSITY > 0 ]] && echo -n "Loading paco module..."
+  source $COMMON_DIR/paco-functions
+  [[ $? > 0 ]] && echo "$COMMON_DIR/paco-functions did not load.." && exit 2
+  [[ $VERBOSITY > 0 ]] && echo "OK"
+fi
+#
 # optimize module
 if [[ "$OPTIMIZE" != "0" ]]; then
   [[ $VERBOSITY > 0 ]] && echo -n "Loading optimization module..."
@@ -485,6 +495,8 @@
 if [[ "$PWD" != "$JHALFSDIR" ]]; then
   cp $COMMON_DIR/{makefile-functions,progress_bar.sh} $JHALFSDIR/
   #
+  [[ $USE_PACO != "0" ]] && cp $COMMON_DIR/paco-build-$PROGNAME.sh $JHALFSDIR/
+  #
   [[ "$OPTIMIZE" != "0" ]] && cp optimize/opt_override $JHALFSDIR/
   #
   if [[ "$COMPARE" != "0" ]] ; then