Index: LFS/master.sh =================================================================== --- LFS/master.sh (revision 2862) +++ LFS/master.sh (working copy) @@ -173,6 +173,11 @@ # Keep the script file name this_script=`basename $file` + # If $this_script corresponds to a paco script, then skip it + case "${this_script}" in + *paco) continue ;; + esac + # We'll run the chroot commands differently than the others, so skip them in the # dependencies and target creation. case "${this_script}" in @@ -180,6 +185,18 @@ *stripping*) [[ "${STRIP}" = "0" ]] && continue ;; esac + # Install paco as the first package in ch6, before installing + # linux-libc-headers, except in iterartive builds + if [[ -z "$N" ]]; then + case $this_script in + *linux-libc-headers) + TMP_SCRIPT="$this_script" + this_script=`echo $this_script | sed -e 's/linux-libc-headers/a-paco/'` + wrt_paco_inst "$this_script" + this_script="$TMP_SCRIPT" ;; + esac + fi + # Grab the name of the target name=`echo ${this_script} | sed -e 's@[0-9]\{3\}-@@'` @@ -232,7 +249,9 @@ # and not to use chroot. case "${this_script}" in *kernfs) wrt_run_as_root "${this_script}" "$file" ;; - *) wrt_run_as_chroot1 "${this_script}" "$file" ;; + *) wrt_paco_prep + wrt_run_as_chroot1 "${this_script}" "$file" + wrt_paco_log "$pkg_tarball" ;; esac # Remove the build directory(ies) except if the package build fails. @@ -252,6 +271,16 @@ PREV=${this_script}${N} # Set system_build envar for iteration targets system_build=$chapter6 + + # Reinstalling paco after readsjusting the toolchain. + case "${this_script}" in + *readjusting) + TMP_SCRIPT="$this_script" + this_script=`echo ${this_script} | sed -e 's/readjusting/x-paco/'` + wrt_paco_inst "$this_script" + this_script="$TMP_SCRIPT" ;; + esac + done # end for file in chapter06/* } @@ -312,8 +341,18 @@ else wrt_run_as_chroot2 "$this_script" "$file" fi + wrt_paco_log "lfs-sysconf" ;; + *kernel) wrt_paco_prep + wrt_run_as_chroot2 "$this_script" "$file" + wrt_paco_log "$pkg_tarball" + ;; + *bootscripts) wrt_paco_prep + wrt_run_as_chroot2 "$this_script" "$file" + wrt_paco_log "$pkg_tarball" + ;; *) wrt_run_as_chroot2 "$this_script" "$file" + wrt_paco_log "lfs-sysconf" ;; esac Index: LFS/lfs.xsl =================================================================== --- LFS/lfs.xsl (revision 2862) +++ LFS/lfs.xsl (working copy) @@ -32,6 +32,9 @@ + + + @@ -206,6 +209,33 @@ || true + + + + export LD_PRELOAD=/usr/lib/libpaco-log.so + + + + + + export LD_PRELOAD=/usr/lib/libpaco-log.so + + + + + + unset LD_PRELOAD + + + + Index: common/paco-build-hlfs.sh =================================================================== --- common/paco-build-hlfs.sh (revision 0) +++ common/paco-build-hlfs.sh (revision 0) @@ -0,0 +1,12 @@ +#!/bin/sh +set -e + +cd $PKGDIR +./configure --sysconfdir=/etc \ + --enable-scripts \ + --disable-gpaco \ + --disable-static \ + --with-pic && +make && +make install && +make logme Index: common/config =================================================================== --- common/config (revision 2862) +++ common/config (working copy) @@ -86,6 +86,14 @@ #--- Run farce testing 0(no)/1(yes) RUN_FARCE=0 +#==== PACO VARIABLES ==== +#--- Use paco? 0(no)/1(yes) +USE_PACO=1 +PACO_VERSION=1.10.10 + +#--- Name of the Paco source package +PACO_FILE=paco-$PACO_VERSION.tar.* + #==== INTERNAL VARIABLES ==== # Don't edit it unless you know what you are doing @@ -103,3 +111,9 @@ #--- farce report log directory FARCELOGDIR=$LOGDIR/farce + +#--- Variables needed by paco +PACO_INCLUDE=/ +PACO_EXCLUDE=/${SCRIPT_ROOT} +PACO_TMPFILE=/tmp/paco.tmp +LD_PRELOAD=/usr/lib/libpaco-log.so Index: common/func_validate_configs.sh =================================================================== --- common/func_validate_configs.sh (revision 2862) +++ common/func_validate_configs.sh (working copy) @@ -84,9 +84,9 @@ inline_doc # First internal variables, then the ones that change the book's flavour, and lastly system configuration variables - local -r hlfs_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE GETPKG RUNMAKE MODEL GRSECURITY_HOST TEST OPTIMIZE REPORT COMPARE RUN_ICA RUN_FARCE ITERATIONS STRIP FSTAB CONFIG GETKERNEL KEYMAP PAGE TIMEZONE LANG LC_ALL" - local -r clfs_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE GETPKG RUNMAKE METHOD ARCH TARGET TEST OPTIMIZE REPORT COMPARE RUN_ICA RUN_FARCE ITERATIONS STRIP FSTAB BOOT_CONFIG CONFIG GETKERNEL KEYMAP VIMLANG PAGE TIMEZONE LANG" - local -r lfs_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE GETPKG RUNMAKE TEST OPTIMIZE REPORT COMPARE RUN_ICA RUN_FARCE ITERATIONS STRIP FSTAB CONFIG GETKERNEL VIMLANG PAGE TIMEZONE LANG" + local -r hlfs_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE USE_PACO GETPKG RUNMAKE MODEL GRSECURITY_HOST TEST OPTIMIZE REPORT COMPARE RUN_ICA RUN_FARCE ITERATIONS STRIP FSTAB CONFIG GETKERNEL KEYMAP PAGE TIMEZONE LANG LC_ALL" + local -r clfs_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE USE_PACO GETPKG RUNMAKE METHOD ARCH TARGET TEST OPTIMIZE REPORT COMPARE RUN_ICA RUN_FARCE ITERATIONS STRIP FSTAB BOOT_CONFIG CONFIG GETKERNEL KEYMAP VIMLANG PAGE TIMEZONE LANG" + local -r lfs_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE USE_PACO GETPKG RUNMAKE TEST OPTIMIZE REPORT COMPARE RUN_ICA RUN_FARCE ITERATIONS STRIP FSTAB CONFIG GETKERNEL VIMLANG PAGE TIMEZONE LANG" local -r ERROR_MSG_pt1='The variable \"${L_arrow}${config_param}${R_arrow}\" value ${L_arrow}${BOLD}${!config_param}${R_arrow} is invalid,' local -r ERROR_MSG_pt2=' check the config file ${BOLD}${GREEN}\<$(echo $PROGNAME | tr [a-z] [A-Z])/config\> or \${OFF}' @@ -176,6 +176,7 @@ [[ "$GETPKG" = "1" ]] && validate_against_str "x0x x1x" fi ;; RUNMAKE) validate_against_str "x0x x1x" ;; + USE_PACO) validate_against_str "x0x x1x" ;; REPORT) validate_against_str "x0x x1x" if [[ "${!config_param}" = "1" ]]; then if [[ `type -p bc` ]]; then Index: common/paco-functions =================================================================== --- common/paco-functions (revision 0) +++ common/paco-functions (revision 0) @@ -0,0 +1,209 @@ +#!/bin/bash + +#----------------------------# +wrt_paco_inst() { # +#----------------------------# + +# Not using Paco with uClibc, even if requested +if [ $PROGNAME = "hlfs" ]; then + if [ $MODEL = "uclibc" ]; then + USE_PACO=0 + fi +fi + +if [ $USE_PACO != 0 ]; then + paco_script="$1" + paco_file="chapter06/$paco_script" + chapter6="$chapter6 $paco_script" + + # Copy the paco build script to the correct directory and make it executable + cp $JHALFSDIR/paco-build-$PROGNAME.sh $JHALFSDIR/${PROGNAME}-commands/$paco_file && + chmod +x $JHALFSDIR/${PROGNAME}-commands/$paco_file + + # Write target, dependency and unpack + wrt_target "$paco_script" "$PREV" + wrt_unpack2 "$PACO_FILE" + + # Run the script + wrt_run_as_chroot1 "${paco_script}" "${paco_file}" + + # Clean up + wrt_remove_build_dirs "paco" + wrt_touch + + # Override the PREV variable + PREV="$paco_script" +fi +} + + +#----------------------------------# +wrt_paco_prep() { # Export Paco variables +#----------------------------------# and remove tmpfile + +# Not using Paco with uClibc, even if requested +if [ $PROGNAME = "hlfs" ]; then + if [ $MODEL = "uclibc" ]; then + USE_PACO=0 + fi +fi + +check_log_package + +if [ $USE_PACO != 0 ] && [ $LOG_PACKAGE != 0 ]; then +( +cat << EOF + @echo "export PACO_INCLUDE=$PACO_INCLUDE" >> envars && \\ + echo "export PACO_EXCLUDE=\$(SRC):$PACO_EXCLUDE" >> envars && \\ + echo "export PACO_TMPFILE=$PACO_TMPFILE" >> envars && \\ + rm -f \$(MOUNT_PT)$PACO_TMPFILE +EOF +) >> $MKFILE.tmp +fi +} + + +#----------------------------------# +wrt_paco_log() { # If the tmpfile exist, then log the current package +#----------------------------------# and remove tempfile +local PACKAGE + +PACKAGE=`echo $1 | sed -e 's/.tar.*//'` + +# Not using Paco with uClibc, even if requested +if [ $PROGNAME = "hlfs" ]; then + if [ $MODEL = "uclibc" ]; then + USE_PACO=0 + fi +fi + +check_log_package + +if [ $USE_PACO != 0 ]; then + if [ $LOG_PACKAGE != 0 ]; then +( +cat << EOF + @if [ -e \$(MOUNT_PT)$PACO_TMPFILE ]; then \\ + \$(CHROOT1) 'paco -lp+ $PACKAGE < $PACO_TMPFILE' && \\ + rm -f \$(MOUNT_PT)$PACO_TMPFILE; \\ + fi; +EOF +) >> $MKFILE.tmp + fi + wrt_paco_add_log +fi +} + + +#----------------------------------# +wrt_paco_add_log() { # +#----------------------------------# +# Some packages create files using bash redirection, which the LD_PRELOAD lib don't notice +# These rules will add the missing files to the proper logs. +# Most of these is not needed for HLFS, but they do no harm. +if [ $USE_PACO != 0 ]; then + case $this_script in + *glibc) + echo -e "\t@\$(CHROOT1) 'find /lib -type l | paco -lp+ $PACKAGE'" >> $MKFILE.tmp + echo -e "\t@\$(CHROOT1) 'find /etc/{nsswitch.conf,ld.so.conf} | paco -lp+ $PACKAGE'" >> $MKFILE.tmp + ;; + *ncurses) + LIBS="/usr/lib/{libcurses.so,libncurses.so,libform.so,libpanel.so,libmenu.so}" + echo -e "\t@\$(CHROOT1) 'find $LIBS | paco -lp+ $PACKAGE'" >> $MKFILE.tmp + ;; + *bash) + echo -e "\t@\$(CHROOT1) 'echo /bin/sh | paco -lp+ $PACKAGE'" >> $MKFILE.tmp + ;; + *flex) + echo -e "\t@\$(CHROOT1) 'echo /usr/bin/lex | paco -lp+ $PACKAGE'" >> $MKFILE.tmp + ;; + *shadow) + echo -e "\t@\$(CHROOT1) 'echo /etc/login.defs | paco -lp+ $PACKAGE'" >> $MKFILE.tmp + ;; + *hotplug) + echo -e "\t@\$(CHROOT1) 'echo /var/log/hotplug | paco -lp+ $PACKAGE'" >> $MKFILE.tmp + echo -e "\t@\$(CHROOT1) 'echo /var/run/usb | paco -lp+ $PACKAGE'" >> $MKFILE.tmp + ;; + *sysklogd) + echo -e "\t@\$(CHROOT1) 'echo /etc/syslog.conf | paco -lp+ $PACKAGE'" >> $MKFILE.tmp + ;; + *sysvinit) + echo -e "\t@\$(CHROOT1) 'echo /etc/inittab | paco -lp+ $PACKAGE'" >> $MKFILE.tmp + ;; + *udev) + echo -e "\t@\$(CHROOT1) 'find /lib/udev/devices | paco -lp+ $PACKAGE'" >> $MKFILE.tmp + echo -e "\t@\$(CHROOT1) 'echo /lib/firmware | paco -lp+ $PACKAGE'" >> $MKFILE.tmp + echo -e "\t@\$(CHROOT1) 'find /etc/udev/rules.d -type f | paco -lp+ $PACKAGE'" >> $MKFILE.tmp + ;; + *util-linux) + echo -e "\t@\$(CHROOT1) 'echo /var/lib/hwclock | paco -lp+ $PACKAGE'" >> $MKFILE.tmp + echo -e "\t@\$(CHROOT1) 'echo /etc/nologin.txt | paco -lp+ $PACKAGE'" >> $MKFILE.tmp + ;; + *vim) + echo -e "\t@\$(CHROOT1) 'echo /etc/vimrc | paco -lp+ $PACKAGE'" >> $MKFILE.tmp + ;; + # Rules below here will log configuration files created in LFS and HLFS + # They will end up in a log named {h}lfs-sysconf + *setclock) + echo -e "\t@\$(CHROOT2) 'echo /etc/sysconfig/clock | paco -lp+ $PACKAGE'" >> $MKFILE.tmp + ;; + *inputrc) + echo -e "\t@\$(CHROOT2) 'echo /etc/inputrc | paco -lp+ $PACKAGE'" >> $MKFILE.tmp + ;; + *profile) + echo -e "\t@\$(CHROOT2) 'echo /etc/profile | paco -lp+ $PACKAGE'" >> $MKFILE.tmp + ;; + *hostname) + echo -e "\t@\$(CHROOT2) 'echo /etc/sysconfig/network | paco -lp+ $PACKAGE'" >> $MKFILE.tmp + ;; + *localnet) + echo -e "\t@\$(CHROOT2) 'echo /etc/sysconfig/network | paco -lp+ $PACKAGE'" >> $MKFILE.tmp + ;; + *hosts) + echo -e "\t@\$(CHROOT2) 'echo /etc/hosts | paco -lp+ $PACKAGE'" >> $MKFILE.tmp + ;; + *network) + echo -e "\t@\$(CHROOT2) 'echo /etc/sysconfig/network-devices/ifconfig.eth0/ipv4 | paco -lp+ $PACKAGE'" >> $MKFILE.tmp + echo -e "\t@\$(CHROOT2) 'echo /etc/resolv.conf | paco -lp+ $PACKAGE'" >> $MKFILE.tmp + ;; + *fstab) + echo -e "\t@\$(CHROOT2) 'echo /etc/fstab | paco -lp+ $PACKAGE'" >> $MKFILE.tmp + ;; + *theend) # LFS + echo -e "\t@\$(CHROOT2) 'echo /etc/$PROGNAME-release | paco -lp+ $PACKAGE'" >> $MKFILE.tmp + ;; + *finished) # HLFS + echo -e "\t@\$(CHROOT2) 'echo /etc/$PROGNAME-release | paco -lp+ $PACKAGE'" >> $MKFILE.tmp + ;; + esac +fi +} + + +#----------------------------------# +check_log_package() { # +#----------------------------------# +# Maybe don't need this function, but it will avoid writing some +# unnecessary paco commands in the Makefile. + +case $this_script in + *changingowner) LOG_PACKAGE=0 ;; + *creatingdirs) LOG_PACKAGE=0 ;; + *createfiles) LOG_PACKAGE=0 ;; + *pwdgroup) LOG_PACKAGE=0 ;; + *devices) LOG_PACKAGE=0 ;; + *strippingagain) LOG_PACKAGE=0 ;; + *readjusting) LOG_PACKAGE=0 ;; + *setclock) LOG_PACKAGE=0 ;; + *inputrc) LOG_PACKAGE=0 ;; + *profile) LOG_PACKAGE=0 ;; + *hostname) LOG_PACKAGE=0 ;; + *localnet) LOG_PACKAGE=0 ;; + *hosts) LOG_PACKAGE=0 ;; + *network) LOG_PACKAGE=0 ;; + *fstab) LOG_PACKAGE=0 ;; + *theend) LOG_PACKAGE=0 ;; + *finished) LOG_PACKAGE=0 ;; + *) LOG_PACKAGE=1 ;; +esac +} Index: common/paco-build-lfs.sh =================================================================== --- common/paco-build-lfs.sh (revision 0) +++ common/paco-build-lfs.sh (revision 0) @@ -0,0 +1,10 @@ +#!/bin/sh +set -e + +cd $PKGDIR +./configure --sysconfdir=/etc \ + --enable-scripts \ + --disable-gpaco && +make && +make install && +make logme Index: common/common-functions =================================================================== --- common/common-functions (revision 2862) +++ common/common-functions (working copy) @@ -69,6 +69,9 @@ in the configuration file has the proper packages and patches for the book version being processed. +${BOLD} --no-paco${OFF} + dissables paco logging feature. + ${BOLD} -O, --optimize${OFF} Optimize [0-2] 0 = no optimization @@ -733,6 +736,7 @@ --stringparam lc_all $LC_ALL \ --stringparam keymap $KEYMAP \ --stringparam grsecurity_host $GRSECURITY_HOST \ + --stringparam use_paco $USE_PACO \ -o ./${PROGNAME}-commands/ $XSL $BOOK/index.xml >>$LOGDIR/$LOG 2>&1 ;; lfs) @@ -744,6 +748,7 @@ --stringparam timezone $TIMEZONE \ --stringparam page $PAGE \ --stringparam lang $LANG \ + --stringparam use_paco $USE_PACO \ -o ./${PROGNAME}-commands/ $XSL $BOOK/index.xml >>$LOGDIR/$LOG 2>&1 ;; *) exit 1 ;; Index: HLFS/hlfs.xsl =================================================================== --- HLFS/hlfs.xsl (revision 2862) +++ HLFS/hlfs.xsl (working copy) @@ -39,6 +39,9 @@ + + + @@ -177,6 +180,10 @@ + + + export LD_PRELOAD=/usr/lib/libpaco-log.so + make install cd ../blfs-bootscripts-&blfs-bootscripts-version; @@ -237,6 +244,27 @@ || true + + + + + export LD_PRELOAD=/usr/lib/libpaco-log.so + + + + + + export LD_PRELOAD=/usr/lib/libpaco-log.so + + + + + Index: HLFS/master.sh =================================================================== --- HLFS/master.sh (revision 2862) +++ HLFS/master.sh (working copy) @@ -76,7 +76,9 @@ @echo "export PKGDIR=\$(SRC)" > envars EOF ) >> $MKFILE.tmp + wrt_paco_prep wrt_run_as_chroot1 "$toolchain" "$this_script" + wrt_paco_log "`echo $toolchain | sed -e 's@[0-9]\{3\}-@@'`" ;; *) @@ -310,6 +312,11 @@ # Keep the script file name this_script=`basename $file` + # If this script is *-paco, then skip it + case $this_script in + *paco ) continue ;; + esac + # Skip this script depending on jhalfs.conf flags set. case $this_script in # We'll run the chroot commands differently than the others, so skip them in the @@ -319,6 +326,18 @@ *-stripping* ) [[ "$STRIP" = "0" ]] && continue ;; esac + # Install paco as the first package in ch6, before installing + # linux-libc-headers, except in iterartive builds + if [[ -z "$N" ]]; then + case $this_script in + *linux-headers) + TMP_SCRIPT="$this_script" + this_script=`echo $this_script | sed -e 's/linux-headers/a-paco/'` + wrt_paco_inst "$this_script" + this_script="$TMP_SCRIPT" ;; + esac + fi + # Grab the name of the target name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@'` @@ -385,7 +404,9 @@ wrt_RunAsRoot "hlfs" "${this_script}" "${file}" ;; *) # The rest of Chapter06 + wrt_paco_prep wrt_run_as_chroot1 "${this_script}" "${file}" + wrt_paco_log "$pkg_tarball" ;; esac # @@ -405,6 +426,16 @@ PREV=${this_script}${N} # Set system_build envar for iteration targets system_build=$chapter6 + + # Reinstall paco after the toolchain has been readjusted. + case "${this_script}" in + *readjusting) + TMP_SCRIPT="$this_script" + this_script=`echo $this_script | sed -e 's/readjusting/x-paco/'` + wrt_paco_inst "$this_script" + this_script="$TMP_SCRIPT" ;; + esac + done # end for file in chapter06/* } @@ -463,9 +494,19 @@ else # Initialize the log and run the script wrt_run_as_chroot2 "${this_script}" "${file}" fi + wrt_paco_log "hlfs-sysconf" ;; + *kernel) wrt_paco_prep + wrt_run_as_chroot2 "$this_script" "$file" + wrt_paco_log "$(get_package_tarball_name "linux")" + ;; + *bootscripts) wrt_paco_prep + wrt_run_as_chroot2 "$this_script" "$file" + wrt_paco_log "$(get_package_tarball_name "lfs-bootscripts")" + ;; *) # All other scripts wrt_run_as_chroot2 "${this_script}" "${file}" + wrt_paco_log "hlfs-sysconf" ;; esac Index: contrib/jhalfs-paco.patch =================================================================== --- contrib/jhalfs-paco.patch (revision 2862) +++ contrib/jhalfs-paco.patch (working copy) @@ -1,8 +1,8 @@ Index: LFS/master.sh =================================================================== ---- LFS/master.sh (revision 2829) +--- LFS/master.sh (revision 2861) +++ LFS/master.sh (working copy) -@@ -176,6 +176,11 @@ +@@ -173,6 +173,11 @@ # Keep the script file name this_script=`basename $file` @@ -14,7 +14,7 @@ # We'll run the chroot commands differently than the others, so skip them in the # dependencies and target creation. case "${this_script}" in -@@ -183,6 +188,18 @@ +@@ -180,6 +185,18 @@ *stripping*) [[ "${STRIP}" = "0" ]] && continue ;; esac @@ -33,7 +33,7 @@ # Grab the name of the target name=`echo ${this_script} | sed -e 's@[0-9]\{3\}-@@'` -@@ -235,7 +252,9 @@ +@@ -232,7 +249,9 @@ # and not to use chroot. case "${this_script}" in *kernfs) wrt_run_as_root "${this_script}" "$file" ;; @@ -44,7 +44,7 @@ esac # Remove the build directory(ies) except if the package build fails. -@@ -255,6 +274,16 @@ +@@ -252,6 +271,16 @@ PREV=${this_script}${N} # Set system_build envar for iteration targets system_build=$chapter6 @@ -61,7 +61,7 @@ done # end for file in chapter06/* } -@@ -315,8 +344,18 @@ +@@ -312,8 +341,18 @@ else wrt_run_as_chroot2 "$this_script" "$file" fi @@ -82,7 +82,7 @@ Index: LFS/lfs.xsl =================================================================== ---- LFS/lfs.xsl (revision 2829) +--- LFS/lfs.xsl (revision 2861) +++ LFS/lfs.xsl (working copy) @@ -32,6 +32,9 @@ @@ -94,7 +94,7 @@ -@@ -200,6 +203,33 @@ +@@ -206,6 +209,33 @@ || true @@ -147,7 +147,7 @@ +make logme Index: common/config =================================================================== ---- common/config (revision 2829) +--- common/config (revision 2861) +++ common/config (working copy) @@ -86,6 +86,14 @@ #--- Run farce testing 0(no)/1(yes) @@ -156,7 +156,7 @@ +#==== PACO VARIABLES ==== +#--- Use paco? 0(no)/1(yes) +USE_PACO=1 -+PACO_VERSION=1.10.8 ++PACO_VERSION=1.10.10 + +#--- Name of the Paco source package +PACO_FILE=paco-$PACO_VERSION.tar.* @@ -176,22 +176,24 @@ +LD_PRELOAD=/usr/lib/libpaco-log.so Index: common/func_validate_configs.sh =================================================================== ---- common/func_validate_configs.sh (revision 2829) +--- common/func_validate_configs.sh (revision 2861) +++ common/func_validate_configs.sh (working copy) -@@ -84,9 +84,9 @@ +@@ -86,10 +86,10 @@ inline_doc # First internal variables, then the ones that change the book's flavour, and lastly system configuration variables -- local -r hlfs_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE GETPKG RUNMAKE MODEL GRSECURITY_HOST TEST OPTIMIZE REPORT COMPARE RUN_ICA RUN_FARCE ITERATIONS STRIP FSTAB CONFIG GETKERNEL KEYMAP PAGE TIMEZONE LANG LC_ALL" -- local -r clfs_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE GETPKG RUNMAKE METHOD ARCH TARGET TEST OPTIMIZE REPORT COMPARE RUN_ICA RUN_FARCE ITERATIONS STRIP FSTAB BOOT_CONFIG CONFIG GETKERNEL KEYMAP VIMLANG PAGE TIMEZONE LANG" -- local -r lfs_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE GETPKG RUNMAKE TEST OPTIMIZE REPORT COMPARE RUN_ICA RUN_FARCE ITERATIONS STRIP FSTAB CONFIG GETKERNEL VIMLANG PAGE TIMEZONE LANG" -+ local -r hlfs_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE USE_PACO GETPKG RUNMAKE MODEL GRSECURITY_HOST TEST OPTIMIZE REPORT COMPARE RUN_ICA RUN_FARCE ITERATIONS STRIP FSTAB CONFIG GETKERNEL KEYMAP PAGE TIMEZONE LANG LC_ALL" -+ local -r clfs_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE USE_PACO GETPKG RUNMAKE METHOD ARCH TARGET TEST OPTIMIZE REPORT COMPARE RUN_ICA RUN_FARCE ITERATIONS STRIP FSTAB BOOT_CONFIG CONFIG GETKERNEL KEYMAP VIMLANG PAGE TIMEZONE LANG" -+ local -r lfs_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE USE_PACO GETPKG RUNMAKE TEST OPTIMIZE REPORT COMPARE RUN_ICA RUN_FARCE ITERATIONS STRIP FSTAB CONFIG GETKERNEL VIMLANG PAGE TIMEZONE LANG" +- local -r hlfs_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE GETPKG RUNMAKE MODEL GRSECURITY_HOST TEST OPTIMIZE REPORT COMPARE RUN_ICA RUN_FARCE ITERATIONS STRIP FSTAB CONFIG GETKERNEL KEYMAP PAGE TIMEZONE LANG LC_ALL" +- local -r clfs_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE GETPKG RUNMAKE METHOD ARCH TARGET TEST OPTIMIZE REPORT COMPARE RUN_ICA RUN_FARCE ITERATIONS STRIP FSTAB BOOT_CONFIG CONFIG GETKERNEL KEYMAP VIMLANG PAGE TIMEZONE LANG" +- local -r clfs2_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE GETPKG RUNMAKE ARCH TARGET OPTIMIZE REPORT COMPARE RUN_ICA RUN_FARCE ITERATIONS STRIP FSTAB CONFIG GETKERNEL KEYMAP VIMLANG PAGE TIMEZONE LANG" +- local -r lfs_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE GETPKG RUNMAKE TEST OPTIMIZE REPORT COMPARE RUN_ICA RUN_FARCE ITERATIONS STRIP FSTAB CONFIG GETKERNEL VIMLANG PAGE TIMEZONE LANG" ++ local -r hlfs_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE USE_PACO GETPKG RUNMAKE MODEL GRSECURITY_HOST TEST OPTIMIZE REPORT COMPARE RUN_ICA RUN_FARCE ITERATIONS STRIP FSTAB CONFIG GETKERNEL KEYMAP PAGE TIMEZONE LANG LC_ALL" ++ local -r clfs_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE USE_PACO GETPKG RUNMAKE METHOD ARCH TARGET TEST OPTIMIZE REPORT COMPARE RUN_ICA RUN_FARCE ITERATIONS STRIP FSTAB BOOT_CONFIG CONFIG GETKERNEL KEYMAP VIMLANG PAGE TIMEZONE LANG" ++ local -r clfs2_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE USE_PACO GETPKG RUNMAKE ARCH TARGET OPTIMIZE REPORT COMPARE RUN_ICA RUN_FARCE ITERATIONS STRIP FSTAB CONFIG GETKERNEL KEYMAP VIMLANG PAGE TIMEZONE LANG" ++ local -r lfs_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE USE_PACO GETPKG RUNMAKE TEST OPTIMIZE REPORT COMPARE RUN_ICA RUN_FARCE ITERATIONS STRIP FSTAB CONFIG GETKERNEL VIMLANG PAGE TIMEZONE LANG" local -r ERROR_MSG_pt1='The variable \"${L_arrow}${config_param}${R_arrow}\" value ${L_arrow}${BOLD}${!config_param}${R_arrow} is invalid,' local -r ERROR_MSG_pt2=' check the config file ${BOLD}${GREEN}\<$(echo $PROGNAME | tr [a-z] [A-Z])/config\> or \${OFF}' -@@ -176,6 +176,7 @@ +@@ -179,6 +179,7 @@ [[ "$GETPKG" = "1" ]] && validate_against_str "x0x x1x" fi ;; RUNMAKE) validate_against_str "x0x x1x" ;; @@ -430,7 +432,7 @@ +make logme Index: common/common-functions =================================================================== ---- common/common-functions (revision 2829) +--- common/common-functions (revision 2861) +++ common/common-functions (working copy) @@ -69,6 +69,9 @@ in the configuration file has the proper packages and patches for the @@ -442,7 +444,7 @@ ${BOLD} -O, --optimize${OFF} Optimize [0-2] 0 = no optimization -@@ -733,6 +736,7 @@ +@@ -759,6 +762,7 @@ --stringparam lc_all $LC_ALL \ --stringparam keymap $KEYMAP \ --stringparam grsecurity_host $GRSECURITY_HOST \ @@ -450,7 +452,7 @@ -o ./${PROGNAME}-commands/ $XSL $BOOK/index.xml >>$LOGDIR/$LOG 2>&1 ;; lfs) -@@ -744,6 +748,7 @@ +@@ -770,6 +774,7 @@ --stringparam timezone $TIMEZONE \ --stringparam page $PAGE \ --stringparam lang $LANG \ @@ -460,7 +462,7 @@ *) exit 1 ;; Index: HLFS/hlfs.xsl =================================================================== ---- HLFS/hlfs.xsl (revision 2829) +--- HLFS/hlfs.xsl (revision 2861) +++ HLFS/hlfs.xsl (working copy) @@ -39,6 +39,9 @@ @@ -472,7 +474,7 @@ -@@ -191,6 +194,10 @@ +@@ -177,6 +180,10 @@ @@ -483,10 +485,11 @@ make install cd ../blfs-bootscripts-&blfs-bootscripts-version; -@@ -257,6 +264,25 @@ +@@ -237,6 +244,27 @@ || true ++ + + + + export LD_PRELOAD=/usr/lib/libpaco-log.so -+ ++ + + + + + export LD_PRELOAD=/usr/lib/libpaco-log.so -+ ++ + + + ++ Index: HLFS/master.sh =================================================================== ---- HLFS/master.sh (revision 2829) +--- HLFS/master.sh (revision 2861) +++ HLFS/master.sh (working copy) -@@ -250,6 +250,11 @@ +@@ -76,7 +76,9 @@ + @echo "export PKGDIR=\$(SRC)" > envars + EOF + ) >> $MKFILE.tmp ++ wrt_paco_prep + wrt_run_as_chroot1 "$toolchain" "$this_script" ++ wrt_paco_log "`echo $toolchain | sed -e 's@[0-9]\{3\}-@@'`" + ;; + + *) +@@ -310,6 +312,11 @@ # Keep the script file name this_script=`basename $file` @@ -525,7 +539,7 @@ # Skip this script depending on jhalfs.conf flags set. case $this_script in # We'll run the chroot commands differently than the others, so skip them in the -@@ -259,6 +264,18 @@ +@@ -319,6 +326,18 @@ *-stripping* ) [[ "$STRIP" = "0" ]] && continue ;; esac @@ -533,9 +547,9 @@ + # linux-libc-headers, except in iterartive builds + if [[ -z "$N" ]]; then + case $this_script in -+ *linux-libc-headers) ++ *linux-headers) + TMP_SCRIPT="$this_script" -+ this_script=`echo $this_script | sed -e 's/linux-libc-headers/a-paco/'` ++ this_script=`echo $this_script | sed -e 's/linux-headers/a-paco/'` + wrt_paco_inst "$this_script" + this_script="$TMP_SCRIPT" ;; + esac @@ -544,8 +558,8 @@ # Grab the name of the target name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@'` -@@ -334,7 +351,9 @@ - wrt_run_as_root "${this_script}" "${file}" +@@ -385,7 +404,9 @@ + wrt_RunAsRoot "hlfs" "${this_script}" "${file}" ;; *) # The rest of Chapter06 + wrt_paco_prep @@ -554,7 +568,7 @@ ;; esac # -@@ -367,6 +386,16 @@ +@@ -405,6 +426,16 @@ PREV=${this_script}${N} # Set system_build envar for iteration targets system_build=$chapter6 @@ -571,7 +585,7 @@ done # end for file in chapter06/* } -@@ -426,9 +455,19 @@ +@@ -463,9 +494,19 @@ else # Initialize the log and run the script wrt_run_as_chroot2 "${this_script}" "${file}" fi @@ -593,7 +607,7 @@ Index: master.sh =================================================================== ---- master.sh (revision 2829) +--- master.sh (revision 2861) +++ master.sh (working copy) @@ -149,6 +149,8 @@ @@ -604,7 +618,7 @@ --optimize | -O ) test $# = 1 && eval "$exit_missing_arg" shift -@@ -440,6 +442,14 @@ +@@ -444,6 +446,14 @@ [[ $VERBOSITY > 0 ]] && echo "OK" fi # @@ -619,7 +633,7 @@ # optimize module if [[ "$OPTIMIZE" != "0" ]]; then [[ $VERBOSITY > 0 ]] && echo -n "Loading optimization module..." -@@ -486,6 +496,8 @@ +@@ -490,6 +500,8 @@ if [[ "$PWD" != "$JHALFSDIR" ]]; then cp $COMMON_DIR/{makefile-functions,progress_bar.sh} $JHALFSDIR/ # Index: master.sh =================================================================== --- master.sh (revision 2862) +++ master.sh (working copy) @@ -149,6 +149,8 @@ --help | -h ) usage | more && exit ;; + --no-paco ) USE_PACO=0 ;; + --optimize | -O ) test $# = 1 && eval "$exit_missing_arg" shift @@ -440,6 +442,14 @@ [[ $VERBOSITY > 0 ]] && echo "OK" fi # +# paco module +if [[ "$USE_PACO" = "1" ]]; then + [[ $VERBOSITY > 0 ]] && echo -n "Loading paco module..." + source $COMMON_DIR/paco-functions + [[ $? > 0 ]] && echo "$COMMON_DIR/paco-functions did not load.." && exit 2 + [[ $VERBOSITY > 0 ]] && echo "OK" +fi +# # optimize module if [[ "$OPTIMIZE" != "0" ]]; then [[ $VERBOSITY > 0 ]] && echo -n "Loading optimization module..." @@ -486,6 +496,8 @@ if [[ "$PWD" != "$JHALFSDIR" ]]; then cp $COMMON_DIR/{makefile-functions,progress_bar.sh} $JHALFSDIR/ # + [[ $USE_PACO != "0" ]] && cp $COMMON_DIR/paco-build-$PROGNAME.sh $JHALFSDIR/ + # [[ "$OPTIMIZE" != "0" ]] && cp optimize/opt_override $JHALFSDIR/ # if [[ "$COMPARE" != "0" ]] ; then