Index: LFS/master.sh
===================================================================
--- LFS/master.sh (revision 2885)
+++ LFS/master.sh (working copy)
@@ -173,6 +173,11 @@
# Keep the script file name
this_script=`basename $file`
+ # If $this_script corresponds to a paco script, then skip it
+ case "${this_script}" in
+ *paco) continue ;;
+ esac
+
# We'll run the chroot commands differently than the others, so skip them in the
# dependencies and target creation.
case "${this_script}" in
@@ -180,6 +185,18 @@
*stripping*) [[ "${STRIP}" = "0" ]] && continue ;;
esac
+ # Install paco as the first package in ch6, before installing
+ # linux-libc-headers, except in iterartive builds
+ if [[ -z "$N" ]]; then
+ case $this_script in
+ *linux-libc-headers)
+ TMP_SCRIPT="$this_script"
+ this_script=`echo $this_script | sed -e 's/linux-libc-headers/a-paco/'`
+ wrt_paco_inst "$this_script"
+ this_script="$TMP_SCRIPT" ;;
+ esac
+ fi
+
# Grab the name of the target
name=`echo ${this_script} | sed -e 's@[0-9]\{3\}-@@'`
@@ -232,7 +249,9 @@
# and not to use chroot.
case "${this_script}" in
*kernfs) wrt_run_as_root "${this_script}" "$file" ;;
- *) wrt_run_as_chroot1 "${this_script}" "$file" ;;
+ *) wrt_paco_prep
+ wrt_run_as_chroot1 "${this_script}" "$file"
+ wrt_paco_log "$pkg_tarball" ;;
esac
# Remove the build directory(ies) except if the package build fails.
@@ -252,6 +271,16 @@
PREV=${this_script}${N}
# Set system_build envar for iteration targets
system_build=$chapter6
+
+ # Reinstalling paco after readsjusting the toolchain.
+ case "${this_script}" in
+ *readjusting)
+ TMP_SCRIPT="$this_script"
+ this_script=`echo ${this_script} | sed -e 's/readjusting/x-paco/'`
+ wrt_paco_inst "$this_script"
+ this_script="$TMP_SCRIPT" ;;
+ esac
+
done # end for file in chapter06/*
}
@@ -312,8 +341,15 @@
else
wrt_run_as_chroot2 "$this_script" "$file"
fi
+ wrt_paco_log "lfs-sysconf"
;;
+ *kernel | *bootscripts )
+ wrt_paco_prep
+ wrt_run_as_chroot2 "$this_script" "$file"
+ wrt_paco_log "$pkg_tarball"
+ ;;
*) wrt_run_as_chroot2 "$this_script" "$file"
+ wrt_paco_log "lfs-sysconf"
;;
esac
Index: LFS/lfs.xsl
===================================================================
--- LFS/lfs.xsl (revision 2885)
+++ LFS/lfs.xsl (working copy)
@@ -39,6 +39,9 @@
+
+
+
@@ -239,6 +242,33 @@
|| true
+
+
+
+ export LD_PRELOAD=/usr/lib/libpaco-log.so
+
+
+
+
+
+ export LD_PRELOAD=/usr/lib/libpaco-log.so
+
+
+
+
+
+ unset LD_PRELOAD
+
+
+
+
Index: CLFS/master.sh
===================================================================
--- CLFS/master.sh (revision 2885)
+++ CLFS/master.sh (working copy)
@@ -495,6 +495,11 @@
# Keep the script file name
this_script=`basename $file`
+ # If $this_script corresponds to a paco script, then skip it
+ case "${this_script}" in
+ *paco) continue ;;
+ esac
+
# Test if the stripping phase must be skipped.
# Skip alsp temp-perl for iterative runs
case $this_script in
@@ -502,6 +507,18 @@
*temp-perl*) [[ -n "$N" ]] && continue ;;
esac
+ # Install paco as the first package in ch6, before installing
+ # linux-libc-headers, except in iterartive builds
+ if [[ -z "$N" ]]; then
+ case $this_script in
+ *linux-headers)
+ TMP_SCRIPT="$this_script"
+ this_script=`echo $this_script | sed -e 's/linux-headers/a-paco/'`
+ wrt_paco_inst "$this_script"
+ this_script="$TMP_SCRIPT" ;;
+ esac
+ fi
+
# Grab the name of the target, strip id number, XXX-script
name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@' \
-e 's@temp-@@' \
@@ -554,7 +571,9 @@
[[ "$OPTIMIZE" != "0" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
fi
#
+ wrt_paco_prep
wrt_run_as_chroot1 "${this_script}" "${file}"
+ wrt_paco_log "$pkg_tarball"
#
[[ "$pkg_tarball" != "" ]] && wrt_remove_build_dirs "${name}"
#
@@ -569,6 +588,16 @@
PREV=${this_script}${N}
# Set system_build envar for iteration targets
system_build=$basicsystem
+
+ # Reinstalling paco after readsjusting the toolchain.
+ case "${this_script}" in
+ *adjusting)
+ TMP_SCRIPT="$this_script"
+ this_script=`echo ${this_script} | sed -e 's/adjusting/x-paco/'`
+ wrt_paco_inst "$this_script"
+ this_script="$TMP_SCRIPT" ;;
+ esac
+
done # for file in final-system/* ...
}
@@ -605,6 +634,11 @@
# Keep the script file name
this_script=`basename $file`
+ # If $this_script corresponds to a paco script, then skip it
+ case "${this_script}" in
+ *paco) continue ;;
+ esac
+
# Test if the stripping phase must be skipped
# Skip alsp temp-perl for iterative runs
case $this_script in
@@ -612,6 +646,18 @@
*temp-perl*) [[ -n "$N" ]] && continue ;;
esac
+ # Install paco as the first package in ch6, before installing
+ # linux-libc-headers, except in iterartive builds
+ if [[ -z "$N" ]]; then
+ case $this_script in
+ *linux-headers)
+ TMP_SCRIPT="$this_script"
+ this_script=`echo $this_script | sed -e 's/linux-headers/a-paco/'`
+ wrt_paco_inst "$this_script"
+ this_script="$TMP_SCRIPT" ;;
+ esac
+ fi
+
# Grab the name of the target, strip id number, XXX-script
name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@' \
-e 's@temp-@@' \
@@ -666,7 +712,9 @@
[[ "$OPTIMIZE" != "0" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
fi
#
+ wrt_paco_prep
wrt_run_as_root2 "${this_script}" "${file}"
+ wrt_paco_log "$pkg_tarball"
#
[[ "$pkg_tarball" != "" ]] && wrt_remove_build_dirs2 "${name}"
#
@@ -681,6 +729,16 @@
PREV=${this_script}${N}
# Set system_build envar for iteration targets
system_build=$basicsystem
+
+ # Reinstalling paco after readsjusting the toolchain.
+ case "${this_script}" in
+ *adjusting)
+ TMP_SCRIPT="$this_script"
+ this_script=`echo ${this_script} | sed -e 's/adjusting/x-paco/'`
+ wrt_paco_inst "$this_script"
+ this_script="$TMP_SCRIPT" ;;
+ esac
+
done # for file in final-system/* ...
}
@@ -729,7 +787,17 @@
#
[[ "$pkg_tarball" != "" ]] && wrt_unpack2 "$pkg_tarball"
#
+ case $this_script in
+ *bootscripts* | *udev-rules )
+ wrt_paco_prep ;;
+ esac
wrt_run_as_chroot1 "${this_script}" "${file}"
+ case $this_script in
+ *bootscripts* | *udev-rules )
+ wrt_paco_log "$pkg_tarball" ;;
+ *)
+ wrt_paco_log "clfs-sysconf" ;;
+ esac
#
[[ "$pkg_tarball" != "" ]] && wrt_remove_build_dirs "${name}"
#
@@ -791,7 +859,17 @@
#
[[ "$pkg_tarball" != "" ]] && wrt_unpack3 "$pkg_tarball"
#
+ case $this_script in
+ *bootscripts* | *udev-rules )
+ wrt_paco_prep ;;
+ esac
wrt_run_as_root2 "${this_script}" "${file}"
+ case $this_script in
+ *bootscripts* | *udev-rules )
+ wrt_paco_log "$pkg_tarball" ;;
+ *)
+ wrt_paco_log "clfs-sysconf" ;;
+ esac
#
[[ "$pkg_tarball" != "" ]] && wrt_remove_build_dirs2 "${name}"
#
@@ -863,8 +941,13 @@
else
wrt_run_as_chroot1 "${this_script}" "${file}"
fi
+ wrt_paco_log "clfs-sysconf"
;;
- *) wrt_run_as_chroot1 "${this_script}" "${file}" ;;
+ *kernel) wrt_paco_prep
+ wrt_run_as_chroot1 "${this_script}" "${file}"
+ wrt_paco_log "$pkg_tarball" ;;
+ *) wrt_run_as_chroot1 "${this_script}" "${file}"
+ wrt_paco_log "clfs-sysconf" ;;
esac
#
# Housekeeping...remove any build directory(ies) except if the package build fails.
@@ -942,8 +1025,13 @@
else
wrt_run_as_root2 "${this_script}" "${file}"
fi
+ wrt_paco_log "clfs-sysconf"
;;
- *) wrt_run_as_root2 "${this_script}" "${file}" ;;
+ *kernel) wrt_paco_prep
+ wrt_run_as_root2 "${this_script}" "${file}"
+ wrt_paco_log "$pkg_tarball" ;;
+ *) wrt_run_as_root2 "${this_script}" "${file}"
+ wrt_paco_log "clfs-sysconf" ;;
esac
#
# Housekeeping...remove any build directory(ies) except if the package build fails.
Index: CLFS/clfs.xsl
===================================================================
--- CLFS/clfs.xsl (revision 2885)
+++ CLFS/clfs.xsl (working copy)
@@ -45,6 +45,9 @@
+
+
+
@@ -106,6 +109,25 @@
tar -xvf ../vim-&vim-version;-lang.* --strip-components=1
+
+
+
+ export LD_PRELOAD=/usr/lib/libpaco-log.so
+
+
+
+ export LD_PRELOAD=/usr/lib/libpaco-log.so
+
+
exit
Index: common/paco-build-hlfs.sh
===================================================================
--- common/paco-build-hlfs.sh (revision 0)
+++ common/paco-build-hlfs.sh (revision 0)
@@ -0,0 +1,12 @@
+#!/bin/sh
+set -e
+
+cd $PKGDIR
+./configure --sysconfdir=/etc \
+ --enable-scripts \
+ --disable-gpaco \
+ --disable-static \
+ --with-pic &&
+make &&
+make install &&
+make logme
Index: common/config
===================================================================
--- common/config (revision 2885)
+++ common/config (working copy)
@@ -91,6 +91,23 @@
#--- Run farce testing 0(no)/1(yes)
RUN_FARCE=0
+#==== PACO VARIABLES ====
+#--- Use paco? 0(no)/1(yes)
+USE_PACO=1
+PACO_VERSION=1.10.10
+
+#--- Name of the Paco source package
+PACO_FILE=paco-$PACO_VERSION.tar.bz2 # (use .tar.gz if preferred)
+
+#--- Sourceforge mirror to use for Paco source download
+# Europe: heanet, belnet, puzzle, surfnet, switch, kent
+# North America: superb-east, superb-west, umn, easynews
+# South America: ufpr
+# Asia: nchc, jaist
+# Australia: optusnet
+PACO_MIRROR1=heanet
+PACO_MIRROR2=kent
+
#==== INTERNAL VARIABLES ====
# Don't edit it unless you know what you are doing
@@ -108,3 +125,9 @@
#--- farce report log directory
FARCELOGDIR=$LOGDIR/farce
+
+#--- Variables needed by paco
+PACO_INCLUDE=/
+PACO_EXCLUDE=/${SCRIPT_ROOT}
+PACO_TMPFILE=/tmp/paco.tmp
+LD_PRELOAD=/usr/lib/libpaco-log.so
Index: common/func_validate_configs.sh
===================================================================
--- common/func_validate_configs.sh (revision 2885)
+++ common/func_validate_configs.sh (working copy)
@@ -84,9 +84,9 @@
inline_doc
# First internal variables, then the ones that change the book's flavour, and lastly system configuration variables
- local -r hlfs_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE GETPKG RUNMAKE MODEL GRSECURITY_HOST TEST BOMB_TEST OPTIMIZE REPORT COMPARE RUN_ICA RUN_FARCE ITERATIONS STRIP FSTAB CONFIG GETKERNEL KEYMAP PAGE TIMEZONE LANG LC_ALL"
- local -r clfs_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE GETPKG RUNMAKE METHOD ARCH TARGET TEST BOMB_TEST OPTIMIZE REPORT COMPARE RUN_ICA RUN_FARCE ITERATIONS STRIP FSTAB BOOT_CONFIG CONFIG GETKERNEL KEYMAP VIMLANG PAGE TIMEZONE LANG"
- local -r lfs_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE GETPKG RUNMAKE TEST BOMB_TEST OPTIMIZE REPORT COMPARE RUN_ICA RUN_FARCE ITERATIONS STRIP FSTAB CONFIG GETKERNEL VIMLANG PAGE TIMEZONE LANG"
+ local -r hlfs_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE USE_PACO GETPKG RUNMAKE MODEL GRSECURITY_HOST TEST BOMB_TEST OPTIMIZE REPORT COMPARE RUN_ICA RUN_FARCE ITERATIONS STRIP FSTAB CONFIG GETKERNEL KEYMAP PAGE TIMEZONE LANG LC_ALL"
+ local -r clfs_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE USE_PACO GETPKG RUNMAKE METHOD ARCH TARGET TEST BOMB_TEST OPTIMIZE REPORT COMPARE RUN_ICA RUN_FARCE ITERATIONS STRIP FSTAB BOOT_CONFIG CONFIG GETKERNEL KEYMAP VIMLANG PAGE TIMEZONE LANG"
+ local -r lfs_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE USE_PACO GETPKG RUNMAKE TEST BOMB_TEST OPTIMIZE REPORT COMPARE RUN_ICA RUN_FARCE ITERATIONS STRIP FSTAB CONFIG GETKERNEL VIMLANG PAGE TIMEZONE LANG"
local -r ERROR_MSG_pt1='The variable \"${L_arrow}${config_param}${R_arrow}\" value ${L_arrow}${BOLD}${!config_param}${R_arrow} is invalid,'
local -r ERROR_MSG_pt2=' check the config file ${BOLD}${GREEN}\<$(echo $PROGNAME | tr [a-z] [A-Z])/config\> or \${OFF}'
@@ -176,6 +176,7 @@
[[ "$GETPKG" = "1" ]] && validate_against_str "x0x x1x"
fi ;;
RUNMAKE) validate_against_str "x0x x1x" ;;
+ USE_PACO) validate_against_str "x0x x1x" ;;
REPORT) validate_against_str "x0x x1x"
if [[ "${!config_param}" = "1" ]]; then
if [[ `type -p bc` ]]; then
Index: common/paco-functions
===================================================================
--- common/paco-functions (revision 0)
+++ common/paco-functions (revision 0)
@@ -0,0 +1,311 @@
+#!/bin/bash
+
+#----------------------------#
+wrt_paco_inst() { #
+#----------------------------#
+
+local paco_script="$1"
+
+check_build_model
+
+if [ $USE_PACO != 0 ]; then
+ case $PROGNAME in
+ clfs )
+ paco_file="final-system/$paco_script"
+ basicsystem="$basicsystem $paco_script" ;;
+ * )
+ paco_file="chapter06/$paco_script"
+ chapter6="$chapter6 $paco_script" ;;
+ esac
+
+ # Copy the paco build script to the correct directory and make it executable
+ cp $JHALFSDIR/paco-build-$PROGNAME.sh $JHALFSDIR/${PROGNAME}-commands/$paco_file &&
+ chmod +x $JHALFSDIR/${PROGNAME}-commands/$paco_file
+
+ # Write target, dependency and unpack
+ if [ $CLFS_BOOT = 1 ]; then
+ wrt_target_boot "$paco_script" "$PREV"
+ wrt_unpack3 "$PACO_FILE"
+ wrt_run_as_root2 "${paco_script}" "${paco_file}"
+ wrt_remove_build_dirs2 "paco"
+ else
+ wrt_target "$paco_script" "$PREV"
+ wrt_unpack2 "$PACO_FILE"
+ wrt_run_as_chroot1 "${paco_script}" "${paco_file}"
+ wrt_remove_build_dirs "paco"
+ fi
+
+ wrt_touch
+
+ # Override the PREV variable
+ PREV="$paco_script"
+fi
+}
+
+
+#----------------------------------#
+wrt_paco_prep() { # Export Paco variables
+#----------------------------------# and remove tmpfile
+
+local TMPFILEPATH
+
+check_build_model
+
+check_log_package
+
+if [ $USE_PACO != 0 ] && [ $LOG_PACKAGE != 0 ]; then
+ if [ $CLFS_BOOT = 1 ]; then
+ TMPFILEPATH="$PACO_TMPFILE"
+ else
+ TMPFILEPATH="\$(MOUNT_PT)$PACO_TMPFILE"
+ fi
+(
+cat << EOF
+ @echo "export PACO_INCLUDE=$PACO_INCLUDE" >> envars && \\
+ echo "export PACO_EXCLUDE=\$(SRC):$PACO_EXCLUDE" >> envars && \\
+ echo "export PACO_TMPFILE=$PACO_TMPFILE" >> envars && \\
+ rm -f $TMPFILEPATH
+EOF
+) >> $MKFILE.tmp
+fi
+}
+
+
+#----------------------------------#
+wrt_paco_log() { # If the tmpfile exist, then log the current package
+#----------------------------------# and remove tempfile
+local PACKAGE
+
+# Extract package name and version from the tarball name
+PACKAGE=`echo $1 | sed -e 's/.tar.*//'`
+
+check_build_model
+
+# Check if the package should be logged
+check_log_package
+
+
+if [ $USE_PACO != 0 ]; then
+ if [ $LOG_PACKAGE != 0 ]; then
+ # Only use this if doing CLFS boot build
+ if [ $CLFS_BOOT = 1 ]; then
+(
+cat << EOF
+ @if [ -e $PACO_TMPFILE ]; then \\
+ paco -lp+ $PACKAGE < $PACO_TMPFILE && \\
+ rm -f $PACO_TMPFILE; \\
+ fi;
+EOF
+) >> $MKFILE.tmp
+ # All else should use these commands
+ else
+(
+cat << EOF
+ @if [ -e \$(MOUNT_PT)$PACO_TMPFILE ]; then \\
+ \$(CHROOT1) 'paco -lp+ $PACKAGE < $PACO_TMPFILE' && \\
+ rm -f \$(MOUNT_PT)$PACO_TMPFILE; \\
+ fi;
+EOF
+) >> $MKFILE.tmp
+ fi
+ fi
+ # Add missing files to the logs if needed
+ wrt_paco_add_log
+fi
+}
+
+
+#----------------------------------#
+fnc_add_log() { #
+#----------------------------------#
+
+MISSING_FILE=$1
+
+if [ $CLFS_BOOT = 1 ]; then
+ echo -e "\t@$MISSING_FILE | paco -lp+ $PACKAGE" >> $MKFILE.tmp
+else
+ echo -e "\t@\$(CHROOT1) '$MISSING_FILE | paco -lp+ $PACKAGE'" >> $MKFILE.tmp
+fi
+}
+
+
+#----------------------------------#
+wrt_paco_add_log() { #
+#----------------------------------#
+# Some packages create files using bash redirection, which the LD_PRELOAD lib don't notice
+# These rules will add the missing files to the proper logs.
+# Most of these is not needed for HLFS, but they do no harm.
+if [ $USE_PACO != 0 ]; then
+ case $this_script in
+ *glibc)
+ fnc_add_log "find /lib -type l"
+ fnc_add_log "find /etc/{nsswitch.conf,ld.so.conf}"
+ ;;
+ *ncurses)
+ fnc_add_log "find /usr/lib/{libcurses.so,libncurses.so,libform.so,libpanel.so,libmenu.so}"
+ ;;
+ *bash)
+ fnc_add_log "echo /bin/sh"
+ ;;
+ *flex)
+ fnc_add_log "echo /usr/bin/lex"
+ ;;
+ *shadow)
+ fnc_add_log "echo /etc/login.defs"
+ ;;
+ *hotplug)
+ fnc_add_log "echo /var/log/hotplug"
+ fnc_add_log "echo /var/run/usb"
+ ;;
+ *sysklogd)
+ fnc_add_log "echo /etc/syslog.conf"
+ ;;
+ *sysvinit)
+ fnc_add_log "echo /etc/inittab"
+ ;;
+ *udev)
+ fnc_add_log "find /lib/udev/devices"
+ fnc_add_log "echo /lib/firmware"
+ fnc_add_log "find /etc/udev/rules.d -type f"
+ ;;
+ *util-linux)
+ fnc_add_log "echo /var/lib/hwclock"
+ fnc_add_log "echo /etc/nologin.txt"
+ ;;
+ *vim)
+ fnc_add_log "echo /etc/vimrc"
+ ;;
+ # Rules below here will log configuration files created in {C,H}LFS
+ # They will end up in a log named {c,h}lfs-sysconf
+ *setclock)
+ fnc_add_log "echo /etc/sysconfig/clock"
+ ;;
+ *inputrc)
+ fnc_add_log "echo /etc/inputrc"
+ ;;
+ *profile)
+ fnc_add_log "echo /etc/profile"
+ ;;
+ *hostname)
+ fnc_add_log "echo /etc/sysconfig/network"
+ ;;
+ *localnet)
+ fnc_add_log "echo /etc/sysconfig/network"
+ ;;
+ *hosts)
+ fnc_add_log "echo /etc/hosts"
+ ;;
+ *network)
+ fnc_add_log "echo /etc/sysconfig/network-devices/ifconfig.eth0/ipv4"
+ fnc_add_log "echo /etc/resolv.conf"
+ ;;
+ *fstab)
+ fnc_add_log "echo /etc/fstab"
+ ;;
+ *theend) # LFS and CLFS
+ fnc_add_log "echo /etc/$PROGNAME-release"
+ ;;
+ *finished) # HLFS
+ fnc_add_log "echo /etc/$PROGNAME-release"
+ ;;
+ esac
+fi
+}
+
+
+#----------------------------------#
+check_log_package() { #
+#----------------------------------#
+# Maybe don't need this function, but it will avoid writing some
+# unnecessary paco commands in the Makefile.
+
+case $this_script in
+ *changingowner) LOG_PACKAGE=0 ;;
+ *creatingdirs) LOG_PACKAGE=0 ;;
+ *createfiles) LOG_PACKAGE=0 ;;
+ *pwdgroup) LOG_PACKAGE=0 ;;
+ *devices) LOG_PACKAGE=0 ;;
+ *stripping) LOG_PACKAGE=0 ;;
+ *strippingagain) LOG_PACKAGE=0 ;;
+ *adjusting) LOG_PACKAGE=0 ;;
+ *temp-perl) LOG_PACKAGE=0 ;;
+ *readjusting) LOG_PACKAGE=0 ;;
+ *setclock) LOG_PACKAGE=0 ;;
+ *inputrc) LOG_PACKAGE=0 ;;
+ *profile) LOG_PACKAGE=0 ;;
+ *hostname) LOG_PACKAGE=0 ;;
+ *localnet) LOG_PACKAGE=0 ;;
+ *hosts) LOG_PACKAGE=0 ;;
+ *network) LOG_PACKAGE=0 ;;
+ *fstab) LOG_PACKAGE=0 ;;
+ *theend) LOG_PACKAGE=0 ;;
+ *finished) LOG_PACKAGE=0 ;;
+ *) LOG_PACKAGE=1 ;;
+esac
+}
+
+#----------------------------------#
+get_paco_src() { #
+#----------------------------------#
+# Download the paco sources
+# We don't do any MD5SUM checking as of yet
+# http://jaist.dl.sourceforge.net/sourceforge/paco/paco-1.10.10.tar.bz2
+
+local PACO_URL1="http://$PACO_MIRROR1.dl.sourceforge.net/sourceforge/paco/$PACO_FILE"
+local PACO_URL2="http://$PACO_MIRROR2.dl.sourceforge.net/sourceforge/paco/$PACO_FILE"
+
+# Test if paco is to be used
+[[ ! "$USE_PACO" = "1" ]] && return
+
+# If the file exists in the archive copy it to the $BUILDDIR/sources dir.
+if [ ! -z ${SRC_ARCHIVE} ] &&
+ [ -d ${SRC_ARCHIVE} ] &&
+ [ -f ${SRC_ARCHIVE}/$PACO_FILE ]; then
+ cp ${SRC_ARCHIVE}/$PACO_FILE .
+ echo "$PACO_FILE: -- copied from $SRC_ARCHIVE"
+ fromARCHIVE=1
+else
+ echo "${BOLD}${YELLOW}$PACO_FILE: not found in ${SRC_ARCHIVE}${OFF}"
+ fromARCHIVE=0
+ # If the file does not exist yet in /sources download a fresh one
+ if [ ! -f $PACO_FILE ] ; then
+ if ! wget $PACO_URL1 && ! wget $PACO_URL2 ; then
+ gs_wrt_message "$PACO_FILE not found in the SRC_ARCHIVE or on any server..SKIPPING"
+ continue
+ fi
+ fi
+fi
+
+# Copy the freshly downloaded file to the source archive.
+if [ ! -z ${SRC_ARCHIVE} ] &&
+ [ -d ${SRC_ARCHIVE} ] &&
+ [ -w ${SRC_ARCHIVE} ] &&
+ [ "$fromARCHIVE" = "0" ] ; then
+ echo "Storing file:<$PACO_FILE> in the package archive"
+ cp -f $PACO_FILE ${SRC_ARCHIVE}
+fi
+}
+
+
+#----------------------------------#
+check_build_model() { #
+#----------------------------------#
+# Check what script we're running, and set some switches accordingly
+
+CLFS_BOOT=0
+
+case $PROGNAME in
+ hlfs)
+ # Not using Paco with uClibc, even if requested
+ if [ "$MODEL" = "uclibc" ]; then
+ USE_PACO=0
+ fi
+ ;;
+ clfs)
+ # CLFS boot method require it's own commands
+ if [ "$METHOD" = "boot" ]; then
+ CLFS_BOOT=1
+ fi
+ ;;
+esac
+}
Index: common/paco-build-lfs.sh
===================================================================
--- common/paco-build-lfs.sh (revision 0)
+++ common/paco-build-lfs.sh (revision 0)
@@ -0,0 +1,10 @@
+#!/bin/sh
+set -e
+
+cd $PKGDIR
+./configure --sysconfdir=/etc \
+ --enable-scripts \
+ --disable-gpaco &&
+make &&
+make install &&
+make logme
Index: common/paco-build-clfs.sh
===================================================================
--- common/paco-build-clfs.sh (revision 0)
+++ common/paco-build-clfs.sh (revision 0)
@@ -0,0 +1,10 @@
+#!/bin/sh
+set -e
+
+cd $PKGDIR
+./configure --sysconfdir=/etc \
+ --enable-scripts \
+ --disable-gpaco &&
+make &&
+make install &&
+make logme
Index: common/common-functions
===================================================================
--- common/common-functions (revision 2885)
+++ common/common-functions (working copy)
@@ -69,6 +69,9 @@
in the configuration file has the proper packages and patches for the
book version being processed.
+${BOLD} --no-paco${OFF}
+ dissables paco logging feature.
+
${BOLD} -O, --optimize${OFF}
Optimize [0-2]
0 = no optimization
@@ -720,6 +723,7 @@
--stringparam page $PAGE \
--stringparam lang $LANG \
--stringparam keymap $KEYMAP \
+ --stringparam use_paco $USE_PACO \
-o ./${PROGNAME}-commands/ $XSL $BOOK/$ARCH-index.xml >>$LOGDIR/$LOG 2>&1
;;
hlfs)
@@ -735,6 +739,7 @@
--stringparam lc_all $LC_ALL \
--stringparam keymap $KEYMAP \
--stringparam grsecurity_host $GRSECURITY_HOST \
+ --stringparam use_paco $USE_PACO \
-o ./${PROGNAME}-commands/ $XSL $BOOK/index.xml >>$LOGDIR/$LOG 2>&1
;;
lfs)
@@ -747,6 +752,7 @@
--stringparam timezone $TIMEZONE \
--stringparam page $PAGE \
--stringparam lang $LANG \
+ --stringparam use_paco $USE_PACO \
-o ./${PROGNAME}-commands/ $XSL $BOOK/index.xml >>$LOGDIR/$LOG 2>&1
;;
*) exit 1 ;;
@@ -813,6 +819,9 @@
# Generate URLs file
create_urls
+ # If Paco is to be used, then download the sources
+ get_paco_src
+
IFS=$'\x0A' # Modify the 'internal field separator' to break on 'LF' only
for line in `cat urls.lst`; do
IFS=$saveIFS # Restore the system defaults
Index: HLFS/hlfs.xsl
===================================================================
--- HLFS/hlfs.xsl (revision 2885)
+++ HLFS/hlfs.xsl (working copy)
@@ -46,6 +46,9 @@
+
+
+
@@ -192,6 +195,10 @@
+
+
+ export LD_PRELOAD=/usr/lib/libpaco-log.so
+
make install
cd ../blfs-bootscripts-&blfs-bootscripts-version;
@@ -280,6 +287,25 @@
|| true
+
+
+
+ export LD_PRELOAD=/usr/lib/libpaco-log.so
+
+
+
+
+
+ export LD_PRELOAD=/usr/lib/libpaco-log.so
+
+
+
+
Index: HLFS/master.sh
===================================================================
--- HLFS/master.sh (revision 2885)
+++ HLFS/master.sh (working copy)
@@ -92,7 +92,9 @@
EOF
) >> $MKFILE.tmp
[[ "$TEST" != "0" ]] && wrt_test_log2 "${this_script}"
+ wrt_paco_prep
wrt_run_as_chroot1 "$toolchain" "$this_script"
+ wrt_paco_log "`echo $toolchain | sed -e 's@[0-9]\{3\}-@@'`"
;;
*)
@@ -324,6 +326,11 @@
# Keep the script file name
this_script=`basename $file`
+ # If this script is *-paco, then skip it
+ case $this_script in
+ *paco ) continue ;;
+ esac
+
# Skip this script depending on jhalfs.conf flags set.
case $this_script in
# We'll run the chroot commands differently than the others, so skip them in the
@@ -333,6 +340,18 @@
*-stripping* ) [[ "$STRIP" = "0" ]] && continue ;;
esac
+ # Install paco as the first package in ch6, before installing
+ # linux-libc-headers, except in iterartive builds
+ if [[ -z "$N" ]]; then
+ case $this_script in
+ *linux-headers)
+ TMP_SCRIPT="$this_script"
+ this_script=`echo $this_script | sed -e 's/linux-headers/a-paco/'`
+ wrt_paco_inst "$this_script"
+ this_script="$TMP_SCRIPT" ;;
+ esac
+ fi
+
# Grab the name of the target
name=`echo $this_script | sed -e 's@[0-9]\{3\}-@@'`
@@ -398,7 +417,9 @@
wrt_RunAsRoot "hlfs" "${this_script}" "${file}"
;;
*) # The rest of Chapter06
+ wrt_paco_prep
wrt_run_as_chroot1 "${this_script}" "${file}"
+ wrt_paco_log "$pkg_tarball"
;;
esac
#
@@ -418,6 +439,16 @@
PREV=${this_script}${N}
# Set system_build envar for iteration targets
system_build=$chapter6
+
+ # Reinstall paco after the toolchain has been readjusted.
+ case "${this_script}" in
+ *readjusting)
+ TMP_SCRIPT="$this_script"
+ this_script=`echo $this_script | sed -e 's/readjusting/x-paco/'`
+ wrt_paco_inst "$this_script"
+ this_script="$TMP_SCRIPT" ;;
+ esac
+
done # end for file in chapter06/*
}
@@ -476,9 +507,19 @@
else # Initialize the log and run the script
wrt_run_as_chroot2 "${this_script}" "${file}"
fi
+ wrt_paco_log "hlfs-sysconf"
;;
+ *kernel) wrt_paco_prep
+ wrt_run_as_chroot2 "$this_script" "$file"
+ wrt_paco_log "$(get_package_tarball_name "linux")"
+ ;;
+ *bootscripts) wrt_paco_prep
+ wrt_run_as_chroot2 "$this_script" "$file"
+ wrt_paco_log "$(get_package_tarball_name "lfs-bootscripts")"
+ ;;
*) # All other scripts
wrt_run_as_chroot2 "${this_script}" "${file}"
+ wrt_paco_log "hlfs-sysconf"
;;
esac
Index: master.sh
===================================================================
--- master.sh (revision 2885)
+++ master.sh (working copy)
@@ -149,6 +149,8 @@
--help | -h ) usage | more && exit ;;
+ --no-paco ) USE_PACO=0 ;;
+
--optimize | -O )
test $# = 1 && eval "$exit_missing_arg"
shift
@@ -440,6 +442,14 @@
[[ $VERBOSITY > 0 ]] && echo "OK"
fi
#
+# paco module
+if [[ "$USE_PACO" = "1" ]]; then
+ [[ $VERBOSITY > 0 ]] && echo -n "Loading paco module..."
+ source $COMMON_DIR/paco-functions
+ [[ $? > 0 ]] && echo "$COMMON_DIR/paco-functions did not load.." && exit 2
+ [[ $VERBOSITY > 0 ]] && echo "OK"
+fi
+#
# optimize module
if [[ "$OPTIMIZE" != "0" ]]; then
[[ $VERBOSITY > 0 ]] && echo -n "Loading optimization module..."
@@ -486,6 +496,8 @@
if [[ "$PWD" != "$JHALFSDIR" ]]; then
cp $COMMON_DIR/{makefile-functions,progress_bar.sh} $JHALFSDIR/
#
+ [[ $USE_PACO != "0" ]] && cp $COMMON_DIR/paco-build-$PROGNAME.sh $JHALFSDIR/
+ #
[[ "$OPTIMIZE" != "0" ]] && cp optimize/opt_override $JHALFSDIR/
#
if [[ "$COMPARE" != "0" ]] ; then