source: jhalfs@ f7c6c3c

ablfs-more legacy trunk
Last change on this file since f7c6c3c was f7c6c3c, checked in by Pierre Labastie <pierre@…>, 4 years ago

Allow versions up to 19 for lfs

  • Property mode set to 100755
File size: 14.9 KB
RevLine 
[4da2512]1#!/bin/bash
2# $Id$
3set -e
[bbcdeab]4# Pass trap handlers to functions
5set -E
[4da2512]6
7# VT100 colors
8declare -r RED=$'\e[31m'
9declare -r GREEN=$'\e[32m'
10declare -r YELLOW=$'\e[33m'
11
[0e4ddfa]12# shellcheck disable=SC2034
13declare -r BLUE=$'\e[34m'
[4da2512]14declare -r OFF=$'\e[0m'
15declare -r BOLD=$'\e[1m'
16declare -r tab_=$'\t'
17declare -r nl_=$'\n'
18
[0e4ddfa]19# shellcheck disable=SC2034
[4da2512]20declare -r DD_BORDER="${BOLD}==============================================================================${OFF}"
[0e4ddfa]21# shellcheck disable=SC2034
[4da2512]22declare -r SD_BORDER="${BOLD}------------------------------------------------------------------------------${OFF}"
[0e4ddfa]23# shellcheck disable=SC2034
[4da2512]24declare -r STAR_BORDER="${BOLD}******************************************************************************${OFF}"
25
26# bold yellow > < pair
27declare -r R_arrow=$'\e[1;33m>\e[0m'
28declare -r L_arrow=$'\e[1;33m<\e[0m'
29
30
31#>>>>>>>>>>>>>>>ERROR TRAPPING >>>>>>>>>>>>>>>>>>>>
32#-----------------------#
33simple_error() { # Basic error trap.... JUST DIE
34#-----------------------#
[0e4ddfa]35 LASTLINE="$1"
36 LASTERR="$2"
37 LASTSOURCE="$4"
38 error_message "${GREEN} Error $LASTERR at $LASTSOURCE line ${LASTLINE}!"
[4da2512]39}
40
41see_ya() {
[0e4ddfa]42 printf '\n%b%bjhalfs%b exit%b\n' "$L_arrow" "$BOLD" "$R_arrow" "$OFF"
[4da2512]43}
44##### Simple error TRAPS
45# ctrl-c SIGINT
46# ctrl-y
47# ctrl-z SIGTSTP
48# SIGHUP 1 HANGUP
49# SIGINT 2 INTRERRUPT FROM KEYBOARD Ctrl-C
50# SIGQUIT 3
51# SIGKILL 9 KILL
52# SIGTERM 15 TERMINATION
53# SIGSTOP 17,18,23 STOP THE PROCESS
54#####
55set -e
56trap see_ya 0
[bbcdeab]57trap 'simple_error "${LINENO}" "$?" "${FUNCNAME}" "${BASH_SOURCE}"' ERR
[d505128]58trap 'echo -e "\n\n${RED}INTERRUPT${OFF} trapped\n" && exit 2' \
59 HUP INT QUIT TERM # STOP stops tterminal output and does not seem to
60 # execute the handler
[4da2512]61#>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
62
[0e4ddfa]63simple_message() {
64 # Prevents having to check $VERBOSITY everywhere
65 if [ "$VERBOSITY" -ne 0 ] ; then
66 # shellcheck disable=SC2059
67 printf "$*"
68 fi
69}
70
71warning_message() {
72 simple_message "${YELLOW}\\nWARNING:${OFF} $*\\n\\n"
73}
74
75error_message() {
76 # Prints an error message and exits with LASTERR or 1
77 if [ -n "$LASTERR" ] ; then
78 LASTERR=$(printf '%d' "$LASTERR")
79 else
80 LASTERR=1
81 fi
82 # If +e then disable text output
83 if [[ "$-" =~ e ]]; then
84 printf '\n\n%bERROR:%b %s\n' "$RED" "$OFF" "$*" >&2
85 fi
86 exit "$LASTERR"
87}
88
89load_file() {
90 # source files in a consistent way with an optional message
91 file="$1"
92 shift
93 msg="Loading file ${file}..."
94 [ -z "$*" ] || msg="$*..."
95 simple_message "$msg"
96
97 # shellcheck disable=SC1090
98 source "$file" 2>/dev/null || error_message "$file did not load"
99 simple_message "OK\\n"
100}
101
[4da2512]102version="
[8d56c87]103${BOLD} \"jhalfs\"${OFF} builder tool (development) \$Rev$
[0a0753d]104 \$Date$
[4da2512]105
[f596dde]106 Copyright (C) 2005-2019, the jhalfs team:
107 Jeremy Huntwork
108 George Boudreau
109 Manuel Canales Esparcia
110 Thomas Pegg
111 Matthew Burgess
112 Pierre Labastie
[4da2512]113
[f596dde]114 Unless specified, all the files in this directory and its sub-directories
115 are subjected to the ${BOLD}MIT license${OFF}. See the ${BOLD}LICENSE${OFF} file.
[4da2512]116
[f596dde]117 The files in the ${BOLD}menu${OFF} directory are subjected to the ${BOLD}ISC License${OFF}.
118 See ${BOLD}LICENSE.txt${OFF} and ${BOLD}README${OFF} in that directory.
[4da2512]119"
120
[f596dde]121usage="${nl_}${tab_}${BOLD}${RED}This script cannot be called directly${OFF}
122${tab_}Type ${BOLD}make${OFF} to run the tool, or
123${tab_}Type ${BOLD}./jhalfs -v${OFF} to display version information."
124
[4da2512]125case $1 in
[909ee37]126 -v ) echo "$version" && exit ;;
[4da2512]127 run ) : ;;
[f596dde]128 * ) echo "$usage" && exit 1 ;;
[4da2512]129esac
130
[65c998b]131# If the user has not saved his configuration file, let's ask
132# if he or she really wants to run this stuff
[a22bfe1]133time_current=$(stat -c '%Y' configuration 2>/dev/null || date +%s)
[cf2f109]134time_old=$(stat -c '%Y' configuration.old 2>/dev/null || printf '%s' "$time_current")
[a22bfe1]135if [ "$(printf '%d' "$time_old")" -ge "$(printf '%d' "$time_current")" ] ; then
136 printf 'Do you want to run jhalfs? yes/no (yes): '
[0e4ddfa]137 read -r ANSWER
[a22bfe1]138 case ${ANSWER:0:1} in
139 n|N) printf "\nExiting gracefully.\n"; exit ;;
140 esac
[65c998b]141fi
142
143# Change this to 0 to suppress almost all messages
[4da2512]144VERBOSITY=1
145
[0e4ddfa]146load_file configuration "Loading config params from <configuration>"
[4da2512]147
148# These are boolean vars generated from Config.in.
[7072e1f]149# ISSUE: If a boolean parameter is not set to y(es) there
150# is no variable defined by the menu app. This can
151# cause a headache if you are not aware.
152# The following variables MUST exist. If they don't, the
153# default value is n(o).
[4da2512]154RUNMAKE=${RUNMAKE:-n}
155GETPKG=${GETPKG:-n}
156COMPARE=${COMPARE:-n}
157RUN_ICA=${RUN_ICA:-n}
[7072e1f]158PKGMNGT=${PKGMNGT:-n}
[945ccaa]159WRAP_INSTALL=${WRAP_INSTALL:-n}
[4da2512]160BOMB_TEST=${BOMB_TEST:-n}
161STRIP=${STRIP:=n}
162REPORT=${REPORT:=n}
[085435e]163NCURSES5=${NCURSES5:-n}
[dc7fd7b]164DEL_LA_FILES=${DEL_LA_FILES:-n}
[b339c94]165FULL_LOCALE=${FULL_LOCALE:-n}
[4da2512]166GRSECURITY_HOST=${GRSECURITY_HOST:-n}
[9a536f7]167CUSTOM_TOOLS=${CUSTOM_TOOLS:-n}
[a16f769]168REBUILD_MAKEFILE=${REBUILD_MAKEFILE:-n}
[93346ee]169INSTALL_LOG=${INSTALL_LOG:-n}
[486e9a7]170CLEAN=${CLEAN:=n}
[d035526]171SET_SSP=${SET_SSP:=n}
172SET_ASLR=${SET_ASLR:=n}
173SET_PAX=${SET_PAX:=n}
174SET_HARDENED_TMP=${SET_HARDENED_TMP:=n}
175SET_WARNINGS=${SET_WARNINGS:=n}
176SET_MISC=${SET_MISC:=n}
177SET_BLOWFISH=${SET_BLOWFISH:=n}
[945ccaa]178UNICODE=${UNICODE:=n}
[3b43e17b]179LOCAL=${LOCAL:=n}
[84a3fda]180REALSBU=${REALSBU:=n}
[f5ecc28]181SAVE_CH5=${SAVE_CH5:=n}
[4da2512]182
[75d6d1c]183if [[ "${NO_PROGRESS_BAR}" = "y" ]] ; then
[0e4ddfa]184# shellcheck disable=SC2034
185 NO_PROGRESS="#"
[75d6d1c]186fi
187
[38ae01f]188# Sanity check on the location of $BUILDDIR / $JHALFSDIR
[0e4ddfa]189CWD="$(cd "$(dirname "$0")" && pwd)"
190if [[ $JHALFSDIR == "$CWD" ]]; then
191 echo " The jhalfs source directory conflicts with the jhalfs build directory."
192 echo " Please move the source directory or change the build directory."
193 exit 2
[38ae01f]194fi
195
[0873ccc]196# Book sources envars
[4965fa8]197BRANCH_ID=${BRANCH_ID:=development}
198
199case $BRANCH_ID in
200 development )
201 case $PROGNAME in
[92b7cb8]202 clfs* ) TREE="" ;;
[c4ad7bf]203 * ) TREE=trunk/BOOK ;;
[4965fa8]204 esac
205 LFSVRS=development
206 ;;
207 *EDIT* ) echo " You forgot to set the branch or stable book version."
208 echo " Please rerun make and fix the configuration."
209 exit 2 ;;
210 branch-* )
[c4ad7bf]211 case $PROGNAME in
212 lfs )
213 LFSVRS=${BRANCH_ID}
[bb2862d]214 TREE=branches/${BRANCH_ID#branch-}
[dd08e14]215 if [ ${BRANCH_ID:7:1} = 6 ]; then
[bb2862d]216 TREE=${TREE}/BOOK
217 fi
[c4ad7bf]218 ;;
219 clfs* )
220 LFSVRS=${BRANCH_ID}
221 TREE=${BRANCH_ID#branch-}
222 ;;
223 esac
[4965fa8]224 ;;
225 * )
226 case $PROGNAME in
[e650dc7]227 lfs )
228 LFSVRS=${BRANCH_ID}
229 TREE=tags/${BRANCH_ID}
[7e9e66f]230 case ${BRANCH_ID:0:2} in
[f7c6c3c]231 [1-9][0-9]) ;;
[7e9e66f]232 [789]*) ;;
233 *) TREE=${TREE}/BOOK ;;
234 esac
[e650dc7]235 ;;
236 hlfs )
[4965fa8]237 LFSVRS=${BRANCH_ID}
238 TREE=tags/${BRANCH_ID}/BOOK
239 ;;
[92b7cb8]240 clfs* )
[4965fa8]241 LFSVRS=${BRANCH_ID}
[34d1b6a]242 TREE=clfs-${BRANCH_ID}
[4965fa8]243 ;;
[92b7cb8]244 * )
[4965fa8]245 esac
246 ;;
247esac
248
[4da2512]249# Set the document location...
[1cf621b]250BOOK=${BOOK:=$JHALFSDIR/$PROGNAME-$LFSVRS}
[4da2512]251
[4965fa8]252
[728955b]253#--- Envars not sourced from configuration
[0e4ddfa]254# shellcheck disable=SC2034
[728955b]255case $PROGNAME in
[0e4ddfa]256 clfs ) declare -r GIT="git://git.clfs.org/cross-lfs" ;;
257 clfs2 ) declare -r GIT="git://git.clfs.org/clfs-sysroot" ;;
258 clfs3 ) declare -r GIT="git://git.clfs.org/clfs-embedded" ;;
259 *) declare -r SVN="svn://svn.linuxfromscratch.org" ;;
[728955b]260esac
[0e4ddfa]261
[728955b]262declare -r LOG=000-masterscript.log
[0e4ddfa]263# Needed for fetching BLFS book sources when building CLFS
264# shellcheck disable=SC2034
[728955b]265declare -r SVN_2="svn://svn.linuxfromscratch.org"
266
[4da2512]267# Set true internal variables
268COMMON_DIR="common"
[0e4ddfa]269PACKAGE_DIR=$(echo "$PROGNAME" | tr '[:lower:]' '[:upper:]')
[4da2512]270MODULE=$PACKAGE_DIR/master.sh
[7072e1f]271PKGMNGTDIR="pkgmngt"
272# The name packageManager.xml is hardcoded in *.xsl, so no variable.
[4da2512]273
[0e4ddfa]274for file in \
275 "$COMMON_DIR/common-functions" \
276 "$COMMON_DIR/libs/func_book_parser" \
277 "$COMMON_DIR/libs/func_download_pkgs" \
278 "$COMMON_DIR/libs/func_wrt_Makefile" \
279 "$MODULE" ; do
280 load_file "$file"
281done
[9a536f7]282
[0e4ddfa]283simple_message "${SD_BORDER}${nl_}"
[9a536f7]284
285
[0e4ddfa]286#*******************************************************************#
287LASTERR=2
288for file in \
289 "$COMMON_DIR/libs/func_check_version.sh" \
290 "$COMMON_DIR/libs/func_validate_configs.sh" \
291 "$COMMON_DIR/libs/func_custom_pkgs" ; do
292 load_file "$file"
293done
294unset LASTERR
295
296simple_message "${SD_BORDER}${nl_}"
[183cc33]297simple_message "Checking tools required for jhalfs${nl_}"
[6ed3dd7]298check_alfs_tools
[0e4ddfa]299simple_message "${SD_BORDER}${nl_}"
[4da2512]300
[e576789]301# blfs-tool envars
302BLFS_TOOL=${BLFS_TOOL:-n}
303if [[ "${BLFS_TOOL}" = "y" ]] ; then
[0e4ddfa]304 simple_message 'Checking supplementary tools for installing BLFS'
[6ed3dd7]305 check_blfs_tools
[0e4ddfa]306 simple_message "${SD_BORDER}${nl_}"
[854854e]307 BLFS_SVN=${BLFS_SVN:-n}
308 BLFS_WORKING_COPY=${BLFS_WORKING_COPY:-n}
309 BLFS_BRANCH=${BLFS_BRANCH:-n}
310 if [[ "${BLFS_SVN}" = "y" ]]; then
311 BLFS_BRANCH_ID=development
312 BLFS_TREE=trunk/BOOK
313 elif [[ "${BLFS_WORKING_COPY}" = "y" ]]; then
[0e4ddfa]314 if [[ ! -d "$BLFS_WC_LOCATION/postlfs" ]] ; then
[854854e]315 echo " BLFS tools: This is not a working copy: $BLFS_WC_LOCATION."
316 echo " Please rerun make and fix the configuration."
317 exit 2
[0e4ddfa]318 fi
319 BLFS_TREE=$(cd "$BLFS_WC_LOCATION"; svn info | grep '^URL' | sed 's@.*BLFS/@@')
320 BLFS_BRANCH_ID=$(echo "$BLFS_TREE" | sed -e 's@trunk/BOOK@development@' \
321 -e 's@branches/@branch-@' \
322 -e 's@tags/@@' \
323 -e 's@/BOOK@@')
[0ba80be]324 elif [[ "${BLFS_BRANCH}" = "y" ]] ; then
[854854e]325 case $BLFS_BRANCH_ID in
326 *EDIT* ) echo " You forgot to set the BLFS branch or stable book version."
327 echo " Please rerun make and fix the configuration."
328 exit 2 ;;
[dd08e14]329 branch-6.* ) BLFS_TREE=branches/${BLFS_BRANCH_ID#branch-}/BOOK ;;
330 branch-* ) BLFS_TREE=branches/${BLFS_BRANCH_ID#branch-} ;;
[91b5249]331 [isv]* | 6.3* ) BLFS_TREE=tags/${BLFS_BRANCH_ID}/BOOK ;;
332 * ) BLFS_TREE=tags/${BLFS_BRANCH_ID} ;;
[854854e]333 esac
334 fi
[0e4ddfa]335 load_file "${COMMON_DIR}/libs/func_install_blfs"
[e576789]336fi
[4da2512]337
338###################################
339### MAIN ###
340###################################
341
342
343validate_config
344echo "${SD_BORDER}${nl_}"
345echo -n "Are you happy with these settings? yes/no (no): "
[0e4ddfa]346read -r ANSWER
347if [ "x$ANSWER" != "xyes" ] ; then
[881c96f]348 echo "${nl_}Rerun make to fix the configuration options.${nl_}"
[d023a35]349 exit
[4da2512]350fi
351echo "${nl_}${SD_BORDER}${nl_}"
352
353# Load additional modules or configuration files based on global settings
354# compare module
355if [[ "$COMPARE" = "y" ]]; then
[0e4ddfa]356 load_file "${COMMON_DIR}/libs/func_compare.sh" 'Loading compare module'
[4da2512]357fi
358#
[f5ecc28]359# save module
360if [[ "$SAVE_CH5" = "y" ]]; then
361 load_file "${COMMON_DIR}/libs/func_save.sh" 'Loading save module'
362fi
363#
[4da2512]364# optimize module
365if [[ "$OPTIMIZE" != "0" ]]; then
[0e4ddfa]366 load_file optimize/optimize_functions 'Loading optimization module'
[4da2512]367 #
368 # optimize configurations
[0e4ddfa]369 load_file optimize/opt_config 'Loading optimization config'
[854854e]370 # The number of parallel jobs is taken from configuration now
[0e4ddfa]371 # shellcheck disable=SC2034
[9ef12f7]372 JH_MAKEFLAGS="-j${N_PARALLEL}"
[4da2512]373 # Validate optimize settings, if required
374 validate_opt_settings
375fi
376#
377
[a16f769]378if [[ "$REBUILD_MAKEFILE" = "n" ]] ; then
[4da2512]379
[200fbde]380# If requested, clean the build directory
[7b6ecc5]381 clean_builddir
[4da2512]382
[7b6ecc5]383 if [[ ! -d $JHALFSDIR ]]; then
[0e4ddfa]384 sudo mkdir -p "$JHALFSDIR"
385 sudo chown "$USER":"$USER" "$JHALFSDIR"
[7b6ecc5]386 fi
[3e7ceed]387
[200fbde]388# Create $BUILDDIR/sources even though it could be created by get_sources()
[7b6ecc5]389 if [[ ! -d $BUILDDIR/sources ]]; then
[0e4ddfa]390 sudo mkdir -p "$BUILDDIR/sources"
391 sudo chmod a+wt "$BUILDDIR/sources"
[7b6ecc5]392 fi
[200fbde]393
394# Create the log directory
[7b6ecc5]395 if [[ ! -d $LOGDIR ]]; then
[0e4ddfa]396 mkdir "$LOGDIR"
[7b6ecc5]397 fi
[0e4ddfa]398 true >"$LOGDIR/$LOG"
[200fbde]399
400# Copy common helper files
[0e4ddfa]401 cp "$COMMON_DIR"/{makefile-functions,progress_bar.sh} "$JHALFSDIR/"
[200fbde]402
403# Copy needed stylesheets
[0e4ddfa]404 cp "$COMMON_DIR"/{packages.xsl,chroot.xsl,kernfs.xsl} "$JHALFSDIR/"
[200fbde]405
406# Fix the XSL book parser
[92b7cb8]407 case $PROGNAME in
[0e4ddfa]408 clfs* ) sed 's,FAKEDIR,'"${BOOK}/BOOK"',' "${PACKAGE_DIR}/${XSL}" > "${JHALFSDIR}/${XSL}" ;;
409 lfs | hlfs ) sed 's,FAKEDIR,'"$BOOK"',' "${PACKAGE_DIR}/${XSL}" > "${JHALFSDIR}/${XSL}" ;;
[92b7cb8]410 * ) ;;
411 esac
[3e7ceed]412 export XSL=$JHALFSDIR/${XSL}
[7b6ecc5]413
[200fbde]414# Copy packageManager.xml, if needed
[3aa1acd]415 [[ "$PKGMNGT" = "y" ]] && [[ "$PROGNAME" = "lfs" ]] && {
[5a965ad]416 sed s@BOOK@"$BOOK"@ "$PKGMNGTDIR/packageManager.xml" > \
417 "$JHALFSDIR/"packageManager.xml
[0e4ddfa]418 cp "$PKGMNGTDIR/packInstall.sh" "$JHALFSDIR/"
[3aa1acd]419 }
[200fbde]420
421# Copy urls.xsl, if needed
[0e4ddfa]422 [[ "$GETPKG" = "y" ]] && cp "$COMMON_DIR/urls.xsl" "$JHALFSDIR/"
[200fbde]423
[c672fa8]424# Always create the test-log directory to allow user to "uncomment" test
425# instructions
[0e4ddfa]426 install -d -m 1777 "$TESTLOGDIR"
[200fbde]427
428# Create the installed-files directory, if needed
[0e4ddfa]429 [[ "$INSTALL_LOG" = "y" ]] && [[ ! -d $FILELOGDIR ]] && install -d -m 1777 "$FILELOGDIR"
[200fbde]430
431# Prepare report creation, if needed
[7b6ecc5]432 if [[ "$REPORT" = "y" ]]; then
[0e4ddfa]433 cp $COMMON_DIR/create-sbu_du-report.sh "$JHALFSDIR/"
[7072e1f]434 # After making sure that all looks sane, dump the settings to a file
[7b6ecc5]435 # This file will be used to create the REPORT header
[0e4ddfa]436 validate_config >"$JHALFSDIR/jhalfs.config"
[7b6ecc5]437 fi
[200fbde]438
439# Copy optimize files, if needed
[0e4ddfa]440 [[ "$OPTIMIZE" != "0" ]] && cp optimize/opt_override "$JHALFSDIR/"
[200fbde]441
442# Copy compare files, if needed
[3e7ceed]443 if [[ "$COMPARE" = "y" ]]; then
[0e4ddfa]444 mkdir -p "$JHALFSDIR/extras"
445 cp extras/* "$JHALFSDIR/extras"
[3e7ceed]446 fi
[200fbde]447
448# Copy custom tools config files, if requested
[3e7ceed]449 if [[ "${CUSTOM_TOOLS}" = "y" ]]; then
450 echo "Copying custom tool scripts to $JHALFSDIR"
[0e4ddfa]451 mkdir -p "$JHALFSDIR/custom-commands"
452 cp -f custom/config/* "$JHALFSDIR/custom-commands"
[3e7ceed]453 fi
[200fbde]454
[f733772]455# Download or updates the book source
456# Note that all customization to $JHALFSDIR have to be done before this.
457# But the LFS book is needed for BLFS tools.
458 get_book
[ebe1ba6]459# At this point, we should have a way to know whether we have a cross
460# or regular book... In case of cross, prohibite TEST=3
461# the position of gcc-pass2 (chapter 6 or 5) tells us (not valid for
462# cross-chap5 branch).
463 if (( TEST == 3 )) && \
[6447575]464 [ -f "$BOOK/chapter06/gcc-pass2.xml" ]; then
[ebe1ba6]465 TEST=2
466 fi
[f733772]467 extract_commands
468 echo "${SD_BORDER}${nl_}"
[0e4ddfa]469 cd "$CWD" # the functions above change directory
[f733772]470
[200fbde]471# Install blfs-tool, if requested.
[7b6ecc5]472 if [[ "${BLFS_TOOL}" = "y" ]] ; then
[6ed3dd7]473 echo Installing BLFS book and tools
[0e4ddfa]474 install_blfs_tools 2>&1 | tee -a "$LOGDIR/$LOG"
[bbcdeab]475 [[ ${PIPESTATUS[0]} != 0 ]] && exit 1
[7b6ecc5]476 fi
477
[4965fa8]478fi
479
[0e4ddfa]480# shellcheck disable=SC2034
[a16f769]481if [[ "$REBUILD_MAKEFILE" = "y" ]] ; then
[8b85dae]482# Sanity check: users tend to tick "rebuild Makefile"
483# without generating one first. Check we have one:
484 if [ ! -f $MKFILE ]; then
485 set -e
486 error_message "You cannot \"rebuild Makefile\" without first building one"
487 fi
488# When regenerating the Makefile, we need to know also the
489# canonical book version
[a16f769]490 case $PROGNAME in
[92b7cb8]491 clfs* )
[0e4ddfa]492 VERSION=$(xmllint --noent "$BOOK/prologue/$ARCH/bookinfo.xml" 2>/dev/null | grep subtitle | sed -e 's/^.*ion //' -e 's/<\/.*//') ;;
[c9598f2]493 lfs)
494 if [[ "$INITSYS" = "sysv" ]] ; then
[0e4ddfa]495 VERSION=$(grep 'ENTITY version ' "$BOOK/general.ent" | cut -d\" -f2)
[c9598f2]496 else
[0e4ddfa]497 VERSION=$(grep 'ENTITY versiond' "$BOOK/general.ent" | cut -d\" -f2)
[c9598f2]498 fi
499 ;;
[a16f769]500 *)
[0e4ddfa]501 VERSION=$(xmllint --noent "$BOOK/prologue/bookinfo.xml" 2>/dev/null | grep subtitle | sed -e 's/^.*ion //' -e 's/<\/.*//') ;;
[a16f769]502 esac
503fi
504
[4da2512]505build_Makefile
[3e7ceed]506
[4da2512]507echo "${SD_BORDER}${nl_}"
508
[1cf621b]509# Check for build prerequisites.
510 echo
[0e4ddfa]511 cd "$CWD"
[1cf621b]512 check_prerequisites
513 echo "${SD_BORDER}${nl_}"
514# All is well, run the build (if requested)
[4da2512]515run_make
Note: See TracBrowser for help on using the repository browser.