source: jhalfs@ 1ba5024

#!/bin/bash
# $Id$
set -e

# VT100 colors
declare -r  BLACK=$'\e[1;30m'
declare -r  DK_GRAY=$'\e[0;30m'

declare -r  RED=$'\e[31m'
declare -r  GREEN=$'\e[32m'
declare -r  YELLOW=$'\e[33m'
declare -r  BLUE=$'\e[34m'
declare -r  MAGENTA=$'\e[35m'
declare -r  CYAN=$'\e[36m'
declare -r  WHITE=$'\e[37m'

declare -r  OFF=$'\e[0m'
declare -r  BOLD=$'\e[1m'
declare -r  REVERSE=$'\e[7m'
declare -r  HIDDEN=$'\e[8m'

declare -r  tab_=$'\t'
declare -r  nl_=$'\n'

declare -r   DD_BORDER="${BOLD}==============================================================================${OFF}"
declare -r   SD_BORDER="${BOLD}------------------------------------------------------------------------------${OFF}"
declare -r STAR_BORDER="${BOLD}******************************************************************************${OFF}"

# bold yellow > <  pair
declare -r R_arrow=$'\e[1;33m>\e[0m'
declare -r L_arrow=$'\e[1;33m<\e[0m'


#>>>>>>>>>>>>>>>ERROR TRAPPING >>>>>>>>>>>>>>>>>>>>
#-----------------------#
simple_error() {        # Basic error trap.... JUST DIE
#-----------------------#
  # If +e then disable text output
  if [[ "$-" =~ "e" ]]; then
    echo -e "\n${RED}ERROR:${GREEN} basic error trapped!${OFF}\n" >&2
  fi
}

see_ya() {
    echo -e "\n${L_arrow}${BOLD}jhalfs-X${R_arrow} exit${OFF}\n"
}
##### Simple error TRAPS
# ctrl-c   SIGINT
# ctrl-y
# ctrl-z   SIGTSTP
# SIGHUP   1 HANGUP
# SIGINT   2 INTRERRUPT FROM KEYBOARD Ctrl-C
# SIGQUIT  3
# SIGKILL  9 KILL
# SIGTERM 15 TERMINATION
# SIGSTOP 17,18,23 STOP THE PROCESS
#####
set -e
trap see_ya 0
trap simple_error ERR
trap 'echo -e "\n\n${RED}INTERRUPT${OFF} trapped\n" &&  exit 2'  1 2 3 15 17 18 23
#>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

version="
${BOLD}  \"jhalfs-X\"${OFF} builder tool (experimental) \$Rev$
  \$Date$

  Written by George Boudreau and Manuel Canales Esparcia,
  plus several contributions.

  Based on an idea from Jeremy Huntwork

  This set of files are published under the
  ${BOLD}Gnu General Public License, Version 2.${OFF}
"

case $1 in
  -v ) echo "$version" && exit 1 ;;
  run ) : ;;
  * )
    echo "${nl_}${tab_}${BOLD}${RED}This script cannot be called directly: EXITING ${OFF}${nl_}"
    exit 1
    ;;
esac

VERBOSITY=1

[[ $VERBOSITY > 0 ]] && echo -n "Loading config params from <configuration>..."
source configuration
[[ $? > 0 ]] && echo "file:configuration did not load.." && exit 1
[[ $VERBOSITY > 0 ]] && echo "OK"

      #--- Envars not sourced from configuration
declare -r SVN="svn://svn.linuxfromscratch.org"
declare -r LOG=000-masterscript.log

# These are boolean vars generated from Config.in.
# ISSUE: If a boolean parameter is not set <true> that
# variable is not defined by the menu app. This can
# cause a headache if you are not careful.
#  The following parameters MUST be created and have a
#  default value.
RUNMAKE=${RUNMAKE:-n}
GETPKG=${GETPKG:-n}
GETKERNEL=${GETKERNEL:-n}
COMPARE=${COMPARE:-n}
RUN_FARCE=${RUN_FARCE:-n}
RUN_ICA=${RUN_ICA:-n}
BOMB_TEST=${BOMB_TEST:-n}
STRIP=${STRIP:=n}
REPORT=${REPORT:=n}
VIMLANG=${VIMLANG:-n}
KEYMAP=${KEYMAP:=none}
GRSECURITY_HOST=${GRSECURITY_HOST:-n}

# Book surces envars
BRANCH_ID=${BRANCH_ID:=development}

case $BRANCH_ID in
  development )
    case $PROGNAME in
      clfs2 ) TREE=branches/clfs-2.0/BOOK ;;
           *) TREE=trunk/BOOK ;;
    esac
    LFSVRS=development
    ;;
  *EDIT* )  echo " You forgot to set the branch or stable book version."
            echo " Please rerun make and fix the configuration."
            exit 2 ;;
  branch-* )
    LFSVRS=${BRANCH_ID}
    TREE=branches/${BRANCH_ID#branch-}/BOOK
    ;;
  * )
    case $PROGNAME in
      lfs | hlfs )
        LFSVRS=${BRANCH_ID}
        TREE=tags/${BRANCH_ID}/BOOK
        ;;
      clfs | clfs2 )
        LFSVRS=${BRANCH_ID}
        TREE=tags/${BRANCH_ID}
        ;;
    esac
    ;;
esac

# Set the document location...
BOOK=${BOOK:=$PROGNAME-$LFSVRS}

# blfs-tool envars
BLFS_TOOL=${BLFS_TOOL:-n}
if [[ "${BLFS_TOOL}" = "y" ]] ; then
  BLFS_BRANCH_ID=${BLFS_BRANCH_ID:=development}
  case $BLFS_BRANCH_ID in
    development )  BLFS_TREE=trunk/BOOK ;;
         *EDIT* )  echo " You forgot to set the BLFS branch or stable book version."
                   echo " Please rerun make and fix the configuration."
                   exit 2 ;;
       branch-* )  BLFS_TREE=branches/${BLFS_BRANCH_ID#branch-}/BOOK ;;
              * )  BLFS_TREE=tags/${BLFS_BRANCH_ID}/BOOK ;;
  esac
  # dependencies envars, to can update it more easy.
    # libxml2
  LIBXML_PKG="libxml2-2.6.26.tar.gz"
  LIBXML_URL="ftp://xmlsoft.org/libxml2/${LIBXML_PKG}"
  LIBXML_MD5="2d8d3805041edab967368b497642f981"
    # libxslt
  LIBXSLT_PKG="libxslt-1.1.17.tar.gz"
  LIBXSLT_URL="ftp://xmlsoft.org/libxslt/${LIBXSLT_PKG}"
  LIBXSLT_MD5="fde6a7a93c0eb14cba628692fa3a1000"
    # DocBook XSL
  DBXSL_PKG="docbook-xsl-1.69.1.tar.bz2"
  DBXSL_URL="http://prdownloads.sourceforge.net/docbook/${DBXSL_PKG}"
  DBXSL_MD5="6ebd29a67f2dcc3f2220f475ee6f6552"
    # Links
  LINKS_PKG="links-2.1pre21.tar.bz2"
  LINKS_URL="http://links.twibright.com/download/${LINKS_PKG}"
  LINKS_MD5="7687e2c32e337e11c6e9d8cd8c5202c9"
    # sudo
  SUDO_PKG="sudo-1.6.8p12.tar.gz"
  SUDO_URL="http://www.courtesan.com/sudo/dist/${SUDO_PKG}"
  SUDO_MD5="b29893c06192df6230dd5f340f3badf5"
    # sudo envar fix patch
  SUDO_PATCH="sudo-1.6.8p12-envvar_fix-1.patch"
  SUDO_PATCH_URL="http://www.linuxfromscratch.org/patches/blfs/svn/${SUDO_PATCH}"
  SUDO_PATCH_MD5="454925aedfe054dff8fe0d03b209f986"
    # wget
  WGET_PKG="wget-1.10.2.tar.gz"
  WGET_URL="ftp://ftp.gnu.org/gnu/wget/${WGET_PKG}"
  WGET_MD5="795fefbb7099f93e2d346b026785c4b8"
    # Subversion
  SVN_PKG="subversion-1.3.1.tar.bz2"
  SVN_URL="http://subversion.tigris.org/tarballs/${SVN_PKG}"
  SVN_MD5="07b95963968ae345541ca99d0e7bf082"
    # GPM
  GPM_PKG="gpm-1.20.1.tar.bz2"
  GPM_URL="ftp://arcana.linux.it/pub/gpm/${GPM_PKG}"
  GPM_MD5="2c63e827d755527950d9d13fe3d87692"
    # GPM segfaul patch
  GPM_PATCH_1="gpm-1.20.1-segfault-1.patch"
  GPM_PATCH_1_URL="http://www.linuxfromscratch.org/patches/blfs/svn/${GPM_PATCH_1}"
  GPM_PATCH_1_MD5="8c88f92990ba7613014fcd1db14ca7ac"
    # GPM silent patch
  GPM_PATCH_2="gpm-1.20.1-silent-1.patch"
  GPM_PATCH_2_URL="http://www.linuxfromscratch.org/patches/blfs/svn/${GPM_PATCH_2}"
  GPM_PATCH_2_MD5="bf6cbefe20c6f15b587f19ebc1c8a37a"
fi

# Set true internal variables
COMMON_DIR="common"
PACKAGE_DIR=$(echo $PROGNAME | tr [a-z] [A-Z])
MODULE=$PACKAGE_DIR/master.sh


[[ $VERBOSITY > 0 ]] && echo -n "Loading common-functions module..."
source $COMMON_DIR/common-functions
[[ $? > 0 ]] && echo " $COMMON_DIR/common-functions did not load.." && exit
[[ $VERBOSITY > 0 ]] && echo "OK"
[[ $VERBOSITY > 0 ]] && echo -n "Loading code module <$MODULE>..."
source $MODULE
[[ $? > 0 ]] && echo "$MODULE did not load.." && exit 2
[[ $VERBOSITY > 0 ]] && echo "OK"
#
[[ $VERBOSITY > 0 ]] && echo "${SD_BORDER}${nl_}"


#*******************************************************************#
[[ $VERBOSITY > 0 ]] && echo -n "Loading function <func_check_version.sh>..."
source $COMMON_DIR/func_check_version.sh
[[ $? > 0 ]] && echo " function module did not load.." && exit 2
[[ $VERBOSITY > 0 ]] && echo "OK"

[[ $VERBOSITY > 0 ]] && echo -n "Loading function <func_validate_configs.sh>..."
source $COMMON_DIR/func_validate_configs.sh
[[ $? > 0 ]] && echo " function module did not load.." && exit 2
[[ $VERBOSITY > 0 ]] && echo "OK"
[[ $VERBOSITY > 0 ]] && echo "${SD_BORDER}${nl_}"


###################################
###          MAIN               ###
###################################

# Check for minimum bash,tar,gcc and kernel versions
echo
check_version "2.6.2" "`uname -r`"         "KERNEL"
check_version "3.0"   "$BASH_VERSION"      "BASH"
check_version "3.0"   "`gcc -dumpversion`" "GCC"
tarVer=`tar --version | head -n1 | cut -d " " -f4`
check_version "1.15.0" "${tarVer}"      "TAR"
echo "${SD_BORDER}${nl_}"

validate_config
echo "${SD_BORDER}${nl_}"
echo -n "Are you happy with these settings? yes/no (no): "
read ANSWER
if [ x$ANSWER != "xyes" ] ; then
  echo "${nl_}Fix the configuration options and rerun the script.${nl_}"
  exit 1
fi
echo "${nl_}${SD_BORDER}${nl_}"

# Load additional modules or configuration files based on global settings
# compare module
if [[ "$COMPARE" = "y" ]]; then
  [[ $VERBOSITY > 0 ]] && echo -n "Loading compare module..."
  source $COMMON_DIR/func_compare.sh
  [[ $? > 0 ]] && echo "$COMMON_DIR/func_compare.sh did not load.." && exit
  [[ $VERBOSITY > 0 ]] && echo "OK"
fi
#
# optimize module
if [[ "$OPTIMIZE" != "0" ]]; then
  [[ $VERBOSITY > 0 ]] && echo -n "Loading optimization module..."
  source optimize/optimize_functions
  [[ $? > 0 ]] && echo " optimize/optimize_functions did not load.." && exit
  [[ $VERBOSITY > 0 ]] && echo "OK"
  #
  # optimize configurations
  [[ $VERBOSITY > 0 ]] && echo -n "Loading optimization config..."
  source optimize/opt_config
  [[ $? > 0 ]] && echo " optimize/opt_config did not load.." && exit
  [[ $VERBOSITY > 0 ]] && echo "OK"
  # Validate optimize settings, if required
  validate_opt_settings
fi
#

# If $BUILDDIR has subdirectories like tools/ or bin/, stop the run
# and notify the user about that.
if [ -d $BUILDDIR/tools -o -d $BUILDDIR/bin ] && [ -z $CLEAN ] ; then
  eval "$no_empty_builddir"
fi

# If requested, clean the build directory
clean_builddir

if [[ ! -d $JHALFSDIR ]]; then
  mkdir -p $JHALFSDIR
fi
#
# Create $BUILDDIR/sources even though it could be created by get_sources()
if [[ ! -d $BUILDDIR/sources ]]; then
  mkdir -p $BUILDDIR/sources
fi
#
# Create the log directory
if [[ ! -d $LOGDIR ]]; then
  mkdir $LOGDIR
fi
>$LOGDIR/$LOG
#
[[ "$TEST" != "0" ]] && [[ ! -d $TESTLOGDIR ]] && install -d -m 1777 $TESTLOGDIR
#
cp $COMMON_DIR/{makefile-functions,progress_bar.sh} $JHALFSDIR/
#
[[ "$OPTIMIZE" != "0" ]] && cp optimize/opt_override $JHALFSDIR/
#
if [[ "$COMPARE" = "y" ]]; then
  mkdir -p $JHALFSDIR/extras
  cp extras/* $JHALFSDIR/extras
fi
#
if [[ -n "$FILES" ]]; then
  # pushd/popd necessary to deal with multiple files
  pushd $PACKAGE_DIR 1> /dev/null
    cp $FILES $JHALFSDIR/
  popd 1> /dev/null
fi
#
if [[ "$REPORT" = "y" ]]; then
  cp $COMMON_DIR/create-sbu_du-report.sh  $JHALFSDIR/
  # After being sure that all looks sane, dump the settings to a file
  # This file will be used to create the REPORT header
  validate_config > $JHALFSDIR/jhalfs.config
fi
#
[[ "$GETPKG" = "y" ]] && cp $COMMON_DIR/urls.xsl  $JHALFSDIR/
#
cp $COMMON_DIR/packages.xsl  $JHALFSDIR/
#
sed 's,FAKEDIR,'$BOOK',' $PACKAGE_DIR/$XSL > $JHALFSDIR/${XSL}
export XSL=$JHALFSDIR/${XSL}

# Install blfs-tool, if requested.
if [[ "${BLFS_TOOL}" = "y" ]] ; then
  # Install the files
  [[ ! -d ${BUILDDIR}${BLFS_ROOT} ]] && mkdir -p ${BUILDDIR}${BLFS_ROOT}
  cp -r BLFS/* ${BUILDDIR}${BLFS_ROOT}
  cp -r menu ${BUILDDIR}${BLFS_ROOT}
  cp $COMMON_DIR/progress_bar.sh ${BUILDDIR}${BLFS_ROOT}
  cp README.BLFS ${BUILDDIR}${BLFS_ROOT}
  # Clean-up
  rm -rf ${BUILDDIR}${BLFS_ROOT}/libs/.svn
  rm -rf ${BUILDDIR}${BLFS_ROOT}/menu/.svn
  rm -rf ${BUILDDIR}${BLFS_ROOT}/menu/lxdialog/.svn
  # Set some harcoded envars to their proper values
  sed -i 's,blfs-xml,'$BLFS_XML',' ${BUILDDIR}${BLFS_ROOT}/{update_book.sh,libs/book.xsl}
  sed -i 's,tracking-dir,'$TRACKING_DIR',' ${BUILDDIR}${BLFS_ROOT}/{update_book.sh,gen-makefile.sh}
  # Copy the dependencies build scripts
  cp -r $COMMON_DIR/blfs-tool-deps $JHALFSDIR/
fi

get_book
echo "${SD_BORDER}${nl_}"

# Get the BLFS book, if requested.
if [[ "${BLFS_TOOL}" = "y" ]] ; then
  echo -n "Downloading the BLFS document, $BLFS_BRANCH_ID version... "
  if [[ ! -d ${BUILDDIR}${BLFS_ROOT}/${BLFS_XML} ]] ; then
    mkdir -p ${BUILDDIR}${BLFS_ROOT}/${BLFS_XML}
    svn co $SVN/BLFS/$TREE ${BUILDDIR}${BLFS_ROOT}/${BLFS_XML} >>$LOGDIR/$LOG 2>&1
  else
    pushd ${BUILDDIR}${BLFS_ROOT}/${BLFS_XML} 1> /dev/null
      svn up >>$LOGDIR/$LOG 2>&1
    popd 1> /dev/null
  fi
  echo -ne "done\n"
  echo "${SD_BORDER}${nl_}"
fi

build_Makefile
echo "${SD_BORDER}${nl_}"

run_make