source: jhalfs@ 4c32ca8

ablfs-more legacy trunk
Last change on this file since 4c32ca8 was 106157fd, checked in by Pierre Labastie <pierre.labastie@…>, 3 years ago

Do not assume there is a group named as $USER

Remove any use of chown $USER:$USER

  • Property mode set to 100755
File size: 14.5 KB
Line 
1#!/bin/bash
2set -e
3# Pass trap handlers to functions
4set -E
5
6# VT100 colors
7declare -r RED=$'\e[31m'
8declare -r GREEN=$'\e[32m'
9declare -r YELLOW=$'\e[33m'
10
11# shellcheck disable=SC2034
12declare -r BLUE=$'\e[34m'
13declare -r OFF=$'\e[0m'
14declare -r BOLD=$'\e[1m'
15declare -r tab_=$'\t'
16declare -r nl_=$'\n'
17
18# shellcheck disable=SC2034
19declare -r DD_BORDER="${BOLD}==============================================================================${OFF}"
20# shellcheck disable=SC2034
21declare -r SD_BORDER="${BOLD}------------------------------------------------------------------------------${OFF}"
22# shellcheck disable=SC2034
23declare -r STAR_BORDER="${BOLD}******************************************************************************${OFF}"
24
25# bold yellow > < pair
26declare -r R_arrow=$'\e[1;33m>\e[0m'
27declare -r L_arrow=$'\e[1;33m<\e[0m'
28
29
30#>>>>>>>>>>>>>>>ERROR TRAPPING >>>>>>>>>>>>>>>>>>>>
31#-----------------------#
32simple_error() { # Basic error trap.... JUST DIE
33#-----------------------#
34 LASTLINE="$1"
35 LASTERR="$2"
36 LASTSOURCE="$4"
37 error_message "${GREEN} Error $LASTERR at $LASTSOURCE line ${LASTLINE}!"
38}
39
40see_ya() {
41 printf '\n%b%bjhalfs%b exit%b\n' "$L_arrow" "$BOLD" "$R_arrow" "$OFF"
42}
43##### Simple error TRAPS
44# ctrl-c SIGINT
45# ctrl-y
46# ctrl-z SIGTSTP
47# SIGHUP 1 HANGUP
48# SIGINT 2 INTRERRUPT FROM KEYBOARD Ctrl-C
49# SIGQUIT 3
50# SIGKILL 9 KILL
51# SIGTERM 15 TERMINATION
52# SIGSTOP 17,18,23 STOP THE PROCESS
53#####
54set -e
55trap see_ya 0
56trap 'simple_error "${LINENO}" "$?" "${FUNCNAME}" "${BASH_SOURCE}"' ERR
57trap 'echo -e "\n\n${RED}INTERRUPT${OFF} trapped\n" && exit 2' \
58 HUP INT QUIT TERM # STOP stops tterminal output and does not seem to
59 # execute the handler
60#>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
61
62simple_message() {
63 # Prevents having to check $VERBOSITY everywhere
64 if [ "$VERBOSITY" -ne 0 ] ; then
65 # shellcheck disable=SC2059
66 printf "$*"
67 fi
68}
69
70warning_message() {
71 simple_message "${YELLOW}\\nWARNING:${OFF} $*\\n\\n"
72}
73
74error_message() {
75 # Prints an error message and exits with LASTERR or 1
76 if [ -n "$LASTERR" ] ; then
77 LASTERR=$(printf '%d' "$LASTERR")
78 else
79 LASTERR=1
80 fi
81 # If +e then disable text output
82 if [[ "$-" =~ e ]]; then
83 printf '\n\n%bERROR:%b %s\n' "$RED" "$OFF" "$*" >&2
84 fi
85 exit "$LASTERR"
86}
87
88load_file() {
89 # source files in a consistent way with an optional message
90 file="$1"
91 shift
92 msg="Loading file ${file}..."
93 [ -z "$*" ] || msg="$*..."
94 simple_message "$msg"
95
96 # shellcheck disable=SC1090
97 source "$file" 2>/dev/null || error_message "$file did not load"
98 simple_message "OK\\n"
99}
100
101git_commit=$(git log -1 --format=format:"%h %ad")
102version="
103${BOLD} \"jhalfs\"${OFF} builder tool (development) $git_commit
104
105 Copyright (C) 2005-2021, the jhalfs team:
106 Jeremy Huntwork
107 George Boudreau
108 Manuel Canales Esparcia
109 Thomas Pegg
110 Matthew Burgess
111 Pierre Labastie
112
113 Unless specified, all the files in this directory and its sub-directories
114 are subjected to the ${BOLD}MIT license${OFF}. See the ${BOLD}LICENSE${OFF} file.
115
116 The files in the ${BOLD}menu${OFF} directory are subjected to the ${BOLD}ISC License${OFF}.
117 See ${BOLD}LICENSE.txt${OFF} and ${BOLD}README${OFF} in that directory.
118"
119
120usage="${nl_}${tab_}${BOLD}${RED}This script cannot be called directly${OFF}
121${tab_}Type ${BOLD}make${OFF} to run the tool, or
122${tab_}Type ${BOLD}./jhalfs -v${OFF} to display version information."
123
124case $1 in
125 -v ) echo "$version" && exit ;;
126 run ) : ;;
127 * ) echo "$usage" && exit 1 ;;
128esac
129
130# If the user has not saved his configuration file, let's ask
131# if he or she really wants to run this stuff
132time_current=$(stat -c '%Y' configuration 2>/dev/null || date +%s)
133time_old=$(stat -c '%Y' configuration.old 2>/dev/null || printf '%s' "$time_current")
134if [ "$(printf '%d' "$time_old")" -ge "$(printf '%d' "$time_current")" ] ; then
135 printf 'Do you want to run jhalfs? yes/no (yes): '
136 read -r ANSWER
137 case ${ANSWER:0:1} in
138 n|N) printf "\nExiting gracefully.\n"; exit ;;
139 esac
140fi
141
142# Change this to 0 to suppress almost all messages
143VERBOSITY=1
144
145load_file configuration "Loading config params from <configuration>"
146
147# These are boolean vars generated from Config.in.
148# ISSUE: If a boolean parameter is not set to y(es) there
149# is no variable defined by the menu app. This can
150# cause a headache if you are not aware.
151# The following variables MUST exist. If they don't, the
152# default value is n(o).
153RUNMAKE=${RUNMAKE:-n}
154GETPKG=${GETPKG:-n}
155COMPARE=${COMPARE:-n}
156RUN_ICA=${RUN_ICA:-n}
157PKGMNGT=${PKGMNGT:-n}
158WRAP_INSTALL=${WRAP_INSTALL:-n}
159BOMB_TEST=${BOMB_TEST:-n}
160STRIP=${STRIP:=n}
161REPORT=${REPORT:=n}
162NCURSES5=${NCURSES5:-n}
163DEL_LA_FILES=${DEL_LA_FILES:-n}
164FULL_LOCALE=${FULL_LOCALE:-n}
165GRSECURITY_HOST=${GRSECURITY_HOST:-n}
166CUSTOM_TOOLS=${CUSTOM_TOOLS:-n}
167REBUILD_MAKEFILE=${REBUILD_MAKEFILE:-n}
168INSTALL_LOG=${INSTALL_LOG:-n}
169CLEAN=${CLEAN:=n}
170SET_SSP=${SET_SSP:=n}
171SET_ASLR=${SET_ASLR:=n}
172SET_PAX=${SET_PAX:=n}
173SET_HARDENED_TMP=${SET_HARDENED_TMP:=n}
174SET_WARNINGS=${SET_WARNINGS:=n}
175SET_MISC=${SET_MISC:=n}
176SET_BLOWFISH=${SET_BLOWFISH:=n}
177UNICODE=${UNICODE:=n}
178LOCAL=${LOCAL:=n}
179REALSBU=${REALSBU:=n}
180SAVE_CH5=${SAVE_CH5:=n}
181
182if [[ "${NO_PROGRESS_BAR}" = "y" ]] ; then
183# shellcheck disable=SC2034
184 NO_PROGRESS="#"
185fi
186
187# Sanity check on the location of $BUILDDIR / $JHALFSDIR
188CWD="$(cd "$(dirname "$0")" && pwd)"
189if [[ $JHALFSDIR == "$CWD" ]]; then
190 echo " The jhalfs source directory conflicts with the jhalfs build directory."
191 echo " Please move the source directory or change the build directory."
192 exit 2
193fi
194
195# Book sources envars
196BRANCH_ID=${BRANCH_ID:=development}
197
198case $BRANCH_ID in
199 development )
200 case $PROGNAME in
201 clfs* ) TREE="" ;;
202 * ) TREE=trunk ;;
203 esac
204 LFSVRS=development
205 ;;
206 *EDIT* ) echo " You forgot to set the branch or stable book version."
207 echo " Please rerun make and fix the configuration."
208 exit 2 ;;
209 branch-* )
210 case $PROGNAME in
211 lfs )
212 LFSVRS=${BRANCH_ID}
213 TREE=${BRANCH_ID#branch-}
214 ;;
215 clfs* )
216 LFSVRS=${BRANCH_ID}
217 TREE=${BRANCH_ID#branch-}
218 ;;
219 esac
220 ;;
221 * )
222 case $PROGNAME in
223 lfs )
224 LFSVRS=${BRANCH_ID}
225 TREE=${BRANCH_ID}
226 ;;
227 hlfs )
228 LFSVRS=${BRANCH_ID}
229 TREE=tags/${BRANCH_ID}/BOOK
230 ;;
231 clfs* )
232 LFSVRS=${BRANCH_ID}
233 TREE=clfs-${BRANCH_ID}
234 ;;
235 * )
236 esac
237 ;;
238esac
239
240# Set the document location...
241BOOK=${BOOK:=$JHALFSDIR/$PROGNAME-$LFSVRS}
242
243
244#--- Envars not sourced from configuration
245# shellcheck disable=SC2034
246case $PROGNAME in
247 clfs ) declare -r GIT="git://git.clfs.org/cross-lfs" ;;
248 clfs2 ) declare -r GIT="git://git.clfs.org/clfs-sysroot" ;;
249 clfs3 ) declare -r GIT="git://git.clfs.org/clfs-embedded" ;;
250 *) declare -r GIT="git://git.linuxfromscratch.org" ;;
251esac
252
253declare -r LOG=000-masterscript.log
254# Needed for fetching BLFS book sources when building CLFS
255# shellcheck disable=SC2034
256# declare -r GIT="git://git.linuxfromscratch.org"
257
258# Set true internal variables
259COMMON_DIR="common"
260PACKAGE_DIR=$(echo "$PROGNAME" | tr '[:lower:]' '[:upper:]')
261MODULE=$PACKAGE_DIR/master.sh
262PKGMNGTDIR="pkgmngt"
263# The name packageManager.xml is hardcoded in *.xsl, so no variable.
264
265for file in \
266 "$COMMON_DIR/common-functions" \
267 "$COMMON_DIR/libs/func_book_parser" \
268 "$COMMON_DIR/libs/func_download_pkgs" \
269 "$COMMON_DIR/libs/func_wrt_Makefile" \
270 "$MODULE" ; do
271 load_file "$file"
272done
273
274simple_message "${SD_BORDER}${nl_}"
275
276
277#*******************************************************************#
278LASTERR=2
279for file in \
280 "$COMMON_DIR/libs/func_check_version.sh" \
281 "$COMMON_DIR/libs/func_validate_configs.sh" \
282 "$COMMON_DIR/libs/func_custom_pkgs" ; do
283 load_file "$file"
284done
285unset LASTERR
286
287simple_message "${SD_BORDER}${nl_}"
288simple_message "Checking tools required for jhalfs${nl_}"
289check_alfs_tools
290simple_message "${SD_BORDER}${nl_}"
291
292# blfs-tool envars
293BLFS_TOOL=${BLFS_TOOL:-n}
294if [[ "${BLFS_TOOL}" = "y" ]] ; then
295 simple_message 'Checking supplementary tools for installing BLFS'
296 check_blfs_tools
297 simple_message "${SD_BORDER}${nl_}"
298 BLFS_GIT=${BLFS_GIT:-n}
299 BLFS_WORKING_COPY=${BLFS_WORKING_COPY:-n}
300 BLFS_BRANCH=${BLFS_BRANCH:-n}
301 if [[ "${BLFS_GIT}" = "y" ]]; then
302 BLFS_BRANCH_ID=development
303 BLFS_TREE=trunk
304 elif [[ "${BLFS_WORKING_COPY}" = "y" ]]; then
305 if [[ ! -d "$BLFS_WC_LOCATION/postlfs" ]] ; then
306 echo " BLFS tools: This is not a working copy: $BLFS_WC_LOCATION."
307 echo " Please rerun make and fix the configuration."
308 exit 2
309 fi
310 BLFS_TREE=$(cd $BLFS_WC_LOCATION; git branch --show-current)
311 BLFS_BRANCH_ID=${BLFS_TREE/trunk/development}
312 elif [[ "${BLFS_BRANCH}" = "y" ]] ; then
313 case $BLFS_BRANCH_ID in
314 *EDIT* ) echo " You forgot to set the BLFS branch or stable book version."
315 echo " Please rerun make and fix the configuration."
316 exit 2 ;;
317 * ) BLFS_TREE=${BLFS_BRANCH_ID#branch-}
318 esac
319 fi
320 load_file "${COMMON_DIR}/libs/func_install_blfs"
321fi
322
323###################################
324### MAIN ###
325###################################
326
327
328validate_config
329echo "${SD_BORDER}${nl_}"
330echo -n "Are you happy with these settings? yes/no (no): "
331read -r ANSWER
332if [ "x$ANSWER" != "xyes" ] ; then
333 echo "${nl_}Rerun make to fix the configuration options.${nl_}"
334 exit
335fi
336echo "${nl_}${SD_BORDER}${nl_}"
337
338# Load additional modules or configuration files based on global settings
339# compare module
340if [[ "$COMPARE" = "y" ]]; then
341 load_file "${COMMON_DIR}/libs/func_compare.sh" 'Loading compare module'
342fi
343#
344# save module
345if [[ "$SAVE_CH5" = "y" ]]; then
346 load_file "${COMMON_DIR}/libs/func_save.sh" 'Loading save module'
347fi
348#
349# optimize module
350if [[ "$OPTIMIZE" != "0" ]]; then
351 load_file optimize/optimize_functions 'Loading optimization module'
352 #
353 # optimize configurations
354 load_file optimize/opt_config 'Loading optimization config'
355 # The number of parallel jobs is taken from configuration now
356 # shellcheck disable=SC2034
357 JH_MAKEFLAGS="-j${N_PARALLEL}"
358 # Validate optimize settings, if required
359 validate_opt_settings
360fi
361#
362
363if [[ "$REBUILD_MAKEFILE" = "n" ]] ; then
364
365# If requested, clean the build directory
366 clean_builddir
367
368 if [[ ! -d $JHALFSDIR ]]; then
369 sudo mkdir -p "$JHALFSDIR"
370# Do not assume there is a group named as $USER, do not use
371# $USER:$USER...
372 sudo chown "$USER" "$JHALFSDIR"
373 fi
374
375# Create $BUILDDIR/sources even though it could be created by get_sources()
376 if [[ ! -d $BUILDDIR/sources ]]; then
377 sudo mkdir -p "$BUILDDIR/sources"
378 sudo chmod a+wt "$BUILDDIR/sources"
379 fi
380
381# Create the log directory
382 if [[ ! -d $LOGDIR ]]; then
383 mkdir "$LOGDIR"
384 fi
385 true >"$LOGDIR/$LOG"
386
387# Copy common helper files
388 cp "$COMMON_DIR"/{makefile-functions,progress_bar.sh} "$JHALFSDIR/"
389
390# Copy needed stylesheets
391 cp "$COMMON_DIR"/{packages.xsl,chroot.xsl,kernfs.xsl} "$JHALFSDIR/"
392
393# Fix the XSL book parser
394 case $PROGNAME in
395 clfs* ) sed 's,FAKEDIR,'"${BOOK}/BOOK"',' "${PACKAGE_DIR}/${XSL}" > "${JHALFSDIR}/${XSL}" ;;
396 lfs | hlfs ) sed 's,FAKEDIR,'"$BOOK"',' "${PACKAGE_DIR}/${XSL}" > "${JHALFSDIR}/${XSL}" ;;
397 * ) ;;
398 esac
399 export XSL=$JHALFSDIR/${XSL}
400
401# Copy packageManager.xml, if needed
402 [[ "$PKGMNGT" = "y" ]] && [[ "$PROGNAME" = "lfs" ]] && {
403 sed s@BOOK@"$BOOK"@ "$PKGMNGTDIR/packageManager.xml" > \
404 "$JHALFSDIR/"packageManager.xml
405 cp "$PKGMNGTDIR/packInstall.sh" "$JHALFSDIR/"
406 }
407
408# Copy urls.xsl, if needed
409 [[ "$GETPKG" = "y" ]] && cp "$COMMON_DIR/urls.xsl" "$JHALFSDIR/"
410
411# Always create the test-log directory to allow user to "uncomment" test
412# instructions
413 install -d -m 1777 "$TESTLOGDIR"
414
415# Create the installed-files directory, if needed
416 [[ "$INSTALL_LOG" = "y" ]] && [[ ! -d $FILELOGDIR ]] && install -d -m 1777 "$FILELOGDIR"
417
418# Prepare report creation, if needed
419 if [[ "$REPORT" = "y" ]]; then
420 cp $COMMON_DIR/create-sbu_du-report.sh "$JHALFSDIR/"
421 # After making sure that all looks sane, dump the settings to a file
422 # This file will be used to create the REPORT header
423 validate_config >"$JHALFSDIR/jhalfs.config"
424 fi
425
426# Copy optimize files, if needed
427 [[ "$OPTIMIZE" != "0" ]] && cp optimize/opt_override "$JHALFSDIR/"
428
429# Copy compare files, if needed
430 if [[ "$COMPARE" = "y" ]]; then
431 mkdir -p "$JHALFSDIR/extras"
432 cp extras/* "$JHALFSDIR/extras"
433 fi
434
435# Copy custom tools config files, if requested
436 if [[ "${CUSTOM_TOOLS}" = "y" ]]; then
437 echo "Copying custom tool scripts to $JHALFSDIR"
438 mkdir -p "$JHALFSDIR/custom-commands"
439 cp -f custom/config/* "$JHALFSDIR/custom-commands"
440 fi
441
442# Download or updates the book source
443# Note that all customization to $JHALFSDIR have to be done before this.
444# But the LFS book is needed for BLFS tools.
445 get_book
446# At this point, we should have a way to know whether we have a cross
447# or regular book... In case of cross, prohibite TEST=3
448# the position of gcc-pass2 (chapter 6 or 5) tells us (not valid for
449# cross-chap5 branch).
450 if (( TEST == 3 )) && \
451 [ -f "$BOOK/chapter06/gcc-pass2.xml" ]; then
452 TEST=2
453 fi
454 extract_commands
455 echo "${SD_BORDER}${nl_}"
456 cd "$CWD" # the functions above change directory
457
458# Install blfs-tool, if requested.
459 if [[ "${BLFS_TOOL}" = "y" ]] ; then
460 echo Installing BLFS book and tools
461 install_blfs_tools 2>&1 | tee -a "$LOGDIR/$LOG"
462 [[ ${PIPESTATUS[0]} != 0 ]] && exit 1
463 fi
464
465fi
466
467# shellcheck disable=SC2034
468if [[ "$REBUILD_MAKEFILE" = "y" ]] ; then
469# Sanity check: users tend to tick "rebuild Makefile"
470# without generating one first. Check we have one:
471 if [ ! -f $MKFILE ]; then
472 set -e
473 error_message "You cannot \"rebuild Makefile\" without first building one"
474 fi
475# When regenerating the Makefile, we need to know also the
476# canonical book version
477 case $PROGNAME in
478 clfs* )
479 VERSION=$(xmllint --noent "$BOOK/prologue/$ARCH/bookinfo.xml" 2>/dev/null | grep subtitle | sed -e 's/^.*ion //' -e 's/<\/.*//') ;;
480 lfs)
481 version_is_in=general.ent
482 if [ -x $BOOK/git-version.sh ]; then
483 ( cd $BOOK && ./git-version.sh )
484 version_is_in=version.ent
485 fi
486 if [[ "$INITSYS" = "sysv" ]] ; then
487 VERSION=$(grep 'ENTITY version ' "$BOOK/$version_is_in" | cut -d\" -f2)
488 else
489 VERSION=$(grep 'ENTITY versiond' "$BOOK/$version_is_in" | cut -d\" -f2)
490 fi
491 ;;
492 *)
493 VERSION=$(xmllint --noent "$BOOK/prologue/bookinfo.xml" 2>/dev/null | grep subtitle | sed -e 's/^.*ion //' -e 's/<\/.*//') ;;
494 esac
495fi
496
497build_Makefile
498
499echo "${SD_BORDER}${nl_}"
500
501# Check for build prerequisites.
502 echo
503 cd "$CWD"
504 check_prerequisites
505 echo "${SD_BORDER}${nl_}"
506# All is well, run the build (if requested)
507run_make
Note: See TracBrowser for help on using the repository browser.