Context Navigation

source: master.sh@ 0306777

2.3 2.3.x 2.4 ablfs ablfs-more legacy new_features trunk

Last change on this file since 0306777 was fdb330a, checked in by George Boudreau <georgeb@…>, 18 years ago
Change exit msg
Property mode set to `100755`
File size: 14.7 KB

Rev	Line
[877cc6a]	1	#!/bin/bash
	2	# $Id$
	3	set -e
	4
	5
	6	#>>>>>>>>>>>>>>>ERROR TRAPPING >>>>>>>>>>>>>>>>>>>>
	7	#-----------------------#
	8	simple_error() { # Basic error trap.... JUST DIE
	9	#-----------------------#
	10	# If +e then disable text output
	11	if [[ "$-" =~ "e" ]]; then
	12	echo -e "\n${RED}ERROR:${GREEN} basic error trapped!${OFF}\n" >&2
	13	fi
	14	}
	15
	16	see_ya() {
[fdb330a]	17	echo -e "\n${L_arrow}${BOLD}jhalfs${R_arrow} exit${OFF}\n"
[877cc6a]	18	}
	19	##### Simple error TRAPS
	20	# ctrl-c SIGINT
	21	# ctrl-y
	22	# ctrl-z SIGTSTP
	23	# SIGHUP 1 HANGUP
	24	# SIGINT 2 INTRERRUPT FROM KEYBOARD Ctrl-C
	25	# SIGQUIT 3
	26	# SIGKILL 9 KILL
	27	# SIGTERM 15 TERMINATION
	28	# SIGSTOP 17,18,23 STOP THE PROCESS
	29	#####
	30	set -e
	31	trap see_ya 0
	32	trap simple_error ERR
	33	trap 'echo -e "\n\n${RED}INTERRUPT${OFF} trapped\n" && exit 2' 1 2 3 15 17 18 23
	34	#>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
	35
	36
	37	if [ ! -L $0 ] ; then
	38	echo "${nl_}${tab_}${BOLD}${RED}This script cannot be called directly: EXITING ${OFF}${nl_}"
	39	exit 1
	40	fi
	41
	42	PROGNAME=$(basename $0)
	43	COMMON_DIR="common"
	44	PACKAGE_DIR=$(echo $PROGNAME \| tr [a-z] [A-Z])
	45	MODULE=$PACKAGE_DIR/master.sh
	46	MODULE_CONFIG=$PACKAGE_DIR/config
	47	VERBOSITY=0
	48
	49
[a705708]	50	if [[ -e using_menuconfig ]]; then
	51	[[ $VERBOSITY > 0 ]] && echo -n "Loading config params from <configuration>..."
	52	source configuration
	53	[[ $? > 0 ]] && echo "file:configuration did not load.." && exit 1
	54	[[ $VERBOSITY > 0 ]] && echo "OK"
	55
	56	#--- Working directories
	57	SCRIPT_ROOT=jhalfs
	58	JHALFSDIR=$BUILDDIR/$SCRIPT_ROOT
	59	LOGDIR=$JHALFSDIR/logs
	60	TESTLOGDIR=$JHALFSDIR/test-logs
	61	MKFILE=$JHALFSDIR/Makefile
	62	#--- ICA report log directory
	63	ICALOGDIR=$LOGDIR/ICA
	64	#--- farce report log directory
	65	FARCELOGDIR=$LOGDIR/farce
[401f81e]	66	XSL=$PROGNAME.xsl
	67
	68	case $PROGNAME in
	69	clfs2) LFSVRS=development; TREE=branches/clfs-2.0/BOOK ;;
	70	*) LFSVRS=development; TREE=trunk/BOOK ;;
	71	esac
[a705708]	72
	73	if [[ ! -z ${BRANCH_ID} ]]; then
	74	case $BRANCH_ID in
	75	dev* \| SVN \| trunk )
	76	case $PROGNAME in
	77	clfs2 ) TREE=branches/clfs-2.0/BOOK ;;
	78	*) TREE=trunk/BOOK ;;
	79	esac
	80	LFSVRS=development
	81	;;
	82	branch-* )
	83	LFSVRS=${BRANCH_ID}
	84	TREE=branches/${BRANCH_ID#branch-}/BOOK
	85	;;
	86	* )
	87	case $PROGNAME in
	88	lfs \| hlfs )
	89	LFSVRS=${BRANCH_ID}
	90	TREE=tags/${BRANCH_ID}/BOOK
	91	;;
	92	clfs \| clfs2 )
	93	LFSVRS=${BRANCH_ID}
	94	TREE=tags/${BRANCH_ID}
	95	;;
	96	esac
	97	;;
	98	esac
	99	fi
[401f81e]	100	# These are boolean vars generated from Config.in.
	101	# ISSUE: If a boolean parameter is not set <true> that
	102	# variable is not defined by the menu app. This can
	103	# cause a headache if you are not careful.
	104	# The following parameters MUST be created and have a
	105	# default value.
	106	RUNMAKE=${RUNMAKE:-n}
	107	GETPKG=${GETPKG:-n}
	108	GETKERNEL=${GETKERNEL:-n}
	109	COMPARE=${COMPARE:-n}
	110	RUN_FARCE=${RUN_FARCE:-n}
	111	RUN_ICA=${RUN_ICA:-n}
	112	BOMB_TEST=${BOMB_TEST:-n}
	113	STRIP=${STRIP:=n}
	114	REPORT=${REPORT:=n}
	115	VIMLANG=${VIMLANG:-n}
	116	KEYMAP=${KEYMAP:=none}
	117	GRSECURITY_HOST=${GRSECURITY_HOST:-n}
	118
	119	else
	120	#
	121	[[ $VERBOSITY > 0 ]] && echo -n "Loading masterscript conf..."
	122	source $COMMON_DIR/config
	123	[[ $? > 0 ]] && echo "$COMMON_DIR/conf did not load.." && exit
	124	[[ $VERBOSITY > 0 ]] && echo "OK"
	125	#
	126	[[ $VERBOSITY > 0 ]] && echo -n "Loading config module <$MODULE_CONFIG>..."
	127	source $MODULE_CONFIG
	128	[[ $? > 0 ]] && echo "$MODULE_CONFIG did not load.." && exit 1
	129	[[ $VERBOSITY > 0 ]] && echo "OK"
	130	#
[a705708]	131	fi
[877cc6a]	132
[401f81e]	133
	134	[[ $VERBOSITY > 0 ]] && echo -n "Loading common-functions module..."
	135	source $COMMON_DIR/common-functions
	136	[[ $? > 0 ]] && echo " $COMMON_DIR/common-functions did not load.." && exit
	137	[[ $VERBOSITY > 0 ]] && echo "OK"
	138	[[ $VERBOSITY > 0 ]] && echo -n "Loading code module <$MODULE>..."
	139	source $MODULE
	140	[[ $? > 0 ]] && echo "$MODULE did not load.." && exit 2
	141	[[ $VERBOSITY > 0 ]] && echo "OK"
	142	#
	143	[[ $VERBOSITY > 0 ]] && echo "${SD_BORDER}${nl_}"
	144
	145
[877cc6a]	146	#===========================================================
	147	# If the var BOOK contains something then, maybe, it points
	148	# to a working doc.. set WC=1, else 'null'
	149	#===========================================================
	150	WC=${BOOK:+1}
	151	#===========================================================
	152
	153
	154	#*******************************************************************#
	155	[[ $VERBOSITY > 0 ]] && echo -n "Loading function <func_check_version.sh>..."
	156	source $COMMON_DIR/func_check_version.sh
	157	[[ $? > 0 ]] && echo " function module did not load.." && exit 2
	158	[[ $VERBOSITY > 0 ]] && echo "OK"
	159
	160	[[ $VERBOSITY > 0 ]] && echo -n "Loading function <func_validate_configs.sh>..."
	161	source $COMMON_DIR/func_validate_configs.sh
	162	[[ $? > 0 ]] && echo " function module did not load.." && exit 2
	163	[[ $VERBOSITY > 0 ]] && echo "OK"
[21f0a91]	164	[[ $VERBOSITY > 0 ]] && echo "${SD_BORDER}${nl_}"
[877cc6a]	165
	166
	167	###################################
[45f82718]	168	### MAIN ###
[877cc6a]	169	###################################
	170
	171	# Evaluate any command line switches
	172
	173	while test $# -gt 0 ; do
	174	case $1 in
[1ec8fce]	175	# Common options for {C,H}LFS books
[877cc6a]	176	--book \| -B )
	177	test $# = 1 && eval "$exit_missing_arg"
	178	shift
	179	case $1 in
	180	dev* \| SVN \| trunk )
	181	LFSVRS=development
[a6655ff]	182	TREE=trunk/BOOK
[877cc6a]	183	;;
[a6655ff]	184	branch-* )
	185	LFSVRS=$1
	186	TREE=branches/${1#branch-}/BOOK
	187	;;
	188	* )
	189	case $PROGNAME in
	190	lfs \| hlfs )
	191	LFSVRS=$1
	192	TREE=tags/$1/BOOK
	193	;;
	194	clfs )
	195	LFSVRS=$1
	196	TREE=tags/$1
	197	;;
	198	esac
[877cc6a]	199	;;
	200	esac
	201	;;
	202
	203	--directory \| -D )
	204	test $# = 1 && eval "$exit_missing_arg"
	205	shift
	206	case $1 in
	207	-* )
	208	echo -e "\n$1 isn't a valid build directory."
	209	echo -e "Directory names can't start with - .\n"
	210	exit 1
	211	;;
	212	* )
	213	BUILDDIR=$1
[1a1f099]	214	JHALFSDIR=$BUILDDIR/${SCRIPT_ROOT}
[877cc6a]	215	LOGDIR=$JHALFSDIR/logs
[a229600]	216	TESTLOGDIR=$JHALFSDIR/test-logs
[877cc6a]	217	MKFILE=$JHALFSDIR/Makefile
	218	;;
	219	esac
	220	;;
	221
[401f81e]	222	--get-packages \| -G ) GETPKG=y ;;
[877cc6a]	223
	224	--help \| -h ) usage \| more && exit ;;
	225
[1b65a84]	226	--optimize \| -O )
	227	test $# = 1 && eval "$exit_missing_arg"
	228	shift
	229	case $1 in
	230	0 \| 1 \| 2 )
	231	OPTIMIZE=$1
	232	;;
	233	* )
	234	echo -e "\n$1 isn't a valid optimize level value."
	235	echo -e "You must use 0, 1, or 2.\n"
	236	exit 1
	237	;;
	238	esac
	239	;;
	240
[877cc6a]	241	--testsuites \| -T )
	242	test $# = 1 && eval "$exit_missing_arg"
	243	shift
	244	case $1 in
	245	0 \| 1 \| 2 \| 3 )
	246	TEST=$1
	247	;;
	248	* )
	249	echo -e "\n$1 isn't a valid testsuites level value."
	250	echo -e "You must to use 0, 1, 2, or 3.\n"
	251	exit 1
	252	;;
	253	esac
	254	;;
	255
	256	--version \| -V )
	257	echo "$version"
	258	exit 0
	259	;;
	260
	261	--working-copy \| -W )
	262	test $# = 1 && eval "$exit_missing_arg"
	263	shift
	264	case $PROGNAME in # Poor checks. We should find better ones.
	265	lfs)
[4bc3c2b]	266	if [ -d $1/chapter09 ] ; then
[877cc6a]	267	WC=1
	268	BOOK=$1
	269	else
[d385453]	270	echo -e "\nLooks like $1 isn't an LFS working copy."
[877cc6a]	271	exit 1
	272	fi
	273	;;
	274	clfs)
[4bc3c2b]	275	if [ -d $1/cross-tools ] ; then
[877cc6a]	276	WC=1
	277	BOOK=$1
	278	else
	279	echo -e "\nLooks like $1 isn't a CLFS working copy."
	280	exit 1
	281	fi
	282	;;
	283	hlfs)
	284	if [ -f $1/template.xml ] ; then
	285	WC=1
	286	BOOK=$1
	287	else
[d385453]	288	echo -e "\nLooks like $1 isn't an HLFS working copy."
[877cc6a]	289	exit 1
	290	fi
	291	;;
	292	esac
	293	;;
	294
[d385453]	295	--comparison \| -C )
[45f82718]	296	test $# = 1 && eval "$exit_missing_arg"
	297	shift
	298	case $1 in
[401f81e]	299	ICA) RUN_ICA=y; RUN_FARCE=n; COMPARE=y ;;
	300	farce) RUN_ICA=n; RUN_FARCE=y; COMPARE=y ;;
	301	both) RUN_ICA=y; RUN_FARCE=y; COMPARE=y ;;
[45f82718]	302	*)
[0ad851d]	303	echo -e "\n$1 is an unknown analysis method."
[45f82718]	304	exit 1
	305	;;
	306	esac
	307	;;
	308
[877cc6a]	309	--fstab \| -F )
	310	test $# = 1 && eval "$exit_missing_arg"
	311	shift
	312	if [ -f $1 ] ; then
	313	FSTAB=$1
	314	else
	315	echo -e "\nFile $1 not found. Verify your command line.\n"
	316	exit 1
	317	fi
	318	;;
	319
	320	--kernel-config \| -K )
	321	test $# = 1 && eval "$exit_missing_arg"
	322	shift
	323	if [ -f $1 ] ; then
	324	CONFIG=$1
	325	else
	326	echo -e "\nFile $1 not found. Verify your command line.\n"
	327	exit 1
	328	fi
	329	;;
	330
[401f81e]	331	--run-make \| -M ) RUNMAKE=y ;;
[877cc6a]	332
[401f81e]	333	--rebuild \| -R ) CLEAN=y ;;
[877cc6a]	334
	335	# CLFS options
	336	--arch \| -A )
	337	test $# = 1 && eval "$exit_missing_arg"
	338	shift
[401f81e]	339	case $PROGNAME in
	340	CLFS2)
	341	case $1 in
	342	arm) ARCH=arm; TARGET="arm-unknown-linux-gnu" ;;
	343	x86) ARCH=x86; TARGET="i686-pc-linux-gnu" ;;
	344	*) echo -e "\n$1 is an unknown or unsupported arch."; exit 1
	345	esac
	346	;;
	347	CLFS)
	348	case $1 in
	349	arm ) ARCH=arm; TARGET="arm-unknown-linux-gnu" ;;
	350	x86 ) ARCH=x86; TARGET="i686-pc-linux-gnu" ;;
	351	i486 ) ARCH=x86; TARGET="i486-pc-linux-gnu" ;;
	352	i586 ) ARCH=x86; TARGET="i586-pc-linux-gnu" ;;
	353	ppc ) ARCH=ppc; TARGET="powerpc-unknown-linux-gnu" ;;
	354	mips ) ARCH=mips; TARGET="mips-unknown-linux-gnu" ;;
	355	mipsel ) ARCH=mips; TARGET="mipsel-unknown-linux-gnu" ;;
	356	sparc ) ARCH=sparc; TARGET="sparcv9-unknown-linux-gnu" ;;
	357
	358	x86_64-64 ) ARCH=x86_64-64; TARGET="x86_64-unknown-linux-gnu" ;;
	359	mips64-64 ) ARCH=mips64-64; TARGET="mips-unknown-linux-gnu" ;;
	360	mipsel64-64 ) ARCH=mips64-64; TARGET="mipsel-unknown-linux-gnu" ;;
	361	sparc64-64 ) ARCH=sparc64-64; TARGET="sparc64-unknown-linux-gnu" ;;
	362	alpha ) ARCH=alpha; TARGET="alpha-unknown-linux-gnu" ;;
	363
	364	x86_64 ) ARCH=x86_64; TARGET="x86_64-unknown-linux-gnu"; TARGET32="i686-pc-linux-gnu" ;;
	365	mips64 ) ARCH=mips64; TARGET="mips-unknown-linux-gnu"; TARGET32="mips-unknown-linux-gnu" ;;
	366	mipsel64 ) ARCH=mips64; TARGET="mipsel-unknown-linux-gnu"; TARGET32="mipsel-unknown-linux-gnu" ;;
	367	sparc64 ) ARCH=sparc64; TARGET="sparc64-unknown-linux-gnu"; TARGET32="sparcv9-unknown-linux-gnu" ;;
	368	ppc64 ) ARCH=ppc64; TARGET="powerpc64-unknown-linux-gnu"; TARGET32="powerpc-unknown-linux-gnu" ;;
	369
	370	* ) echo -e "\n$1 is an unknown or unsupported arch."; exit 1 ;;
	371	esac
	372	;;
[877cc6a]	373	esac
	374	;;
	375
	376	--boot-config )
	377	test $# = 1 && eval "$exit_missing_arg"
	378	shift
	379	if [ -f $1 ] ; then
	380	BOOT_CONFIG=$1
	381	else
	382	echo -e "\nFile $1 not found. Verify your command line.\n"
	383	exit 1
	384	fi
	385	;;
	386
	387	--method )
	388	test $# = 1 && eval "$exit_missing_arg"
	389	shift
	390	case $1 in
	391	chroot \| boot )
	392	METHOD=$1
	393	;;
	394	* )
	395	echo -e "\n$1 isn't a valid build method."
	396	exit 1
	397	;;
	398	esac
	399	;;
	400
	401	# HLFS options
	402	--model )
	403	test $# = 1 && eval "$exit_missing_arg"
	404	shift
	405	case $1 in
	406	glibc \| uclibc )
	407	MODEL=$1
	408	;;
	409	* )
	410	echo -e "\n$1 isn't a valid libc model."
	411	exit 1
	412	;;
	413	esac
	414	;;
	415
	416	# Unknown options
	417	* ) usage ;;
	418	esac
	419	shift
	420	done
	421
[401f81e]	422
[877cc6a]	423	#===================================================
	424	# Set the document location...
	425	# BOOK is either defined in
	426	# xxx.config
	427	# comand line
	428	# default
	429	# If set by conf file or cmd line leave it
	430	# alone otherwise load the default version
	431	#===================================================
	432	BOOK=${BOOK:=$PROGNAME-$LFSVRS}
	433	#===================================================
	434
	435
[401f81e]	436	# Check for minimum bash,tar,gcc and kernel versions
[877cc6a]	437	echo
	438	check_version "2.6.2" "`uname -r`" "KERNEL"
	439	check_version "3.0" "$BASH_VERSION" "BASH"
	440	check_version "3.0" "`gcc -dumpversion`" "GCC"
[27f165a]	441	tarVer=`tar --version \| head -n1 \| cut -d " " -f4`
	442	check_version "1.15.0" "${tarVer}" "TAR"
[21f0a91]	443	echo "${SD_BORDER}${nl_}"
[877cc6a]	444
	445	validate_config
[21f0a91]	446	echo "${SD_BORDER}${nl_}"
[877cc6a]	447	echo -n "Are you happy with these settings? yes/no (no): "
	448	read ANSWER
	449	if [ x$ANSWER != "xyes" ] ; then
	450	echo "${nl_}Fix the configuration options and rerun the script.${nl_}"
	451	exit 1
	452	fi
[21f0a91]	453	echo "${nl_}${SD_BORDER}${nl_}"
[877cc6a]	454
[a0f0bee]	455	# Load additional modules or configuration files based on global settings
[1ee8ad5]	456	# compare module
[401f81e]	457	if [[ "$COMPARE" = "y" ]]; then
[1ee8ad5]	458	[[ $VERBOSITY > 0 ]] && echo -n "Loading compare module..."
	459	source $COMMON_DIR/func_compare.sh
	460	[[ $? > 0 ]] && echo "$COMMON_DIR/func_compare.sh did not load.." && exit
	461	[[ $VERBOSITY > 0 ]] && echo "OK"
	462	fi
[1b65a84]	463	#
	464	# optimize module
	465	if [[ "$OPTIMIZE" != "0" ]]; then
	466	[[ $VERBOSITY > 0 ]] && echo -n "Loading optimization module..."
	467	source optimize/optimize_functions
	468	[[ $? > 0 ]] && echo " optimize/optimize_functions did not load.." && exit
	469	[[ $VERBOSITY > 0 ]] && echo "OK"
[a0f0bee]	470	#
	471	# optimize configurations
[1b65a84]	472	[[ $VERBOSITY > 0 ]] && echo -n "Loading optimization config..."
	473	source optimize/opt_config
	474	[[ $? > 0 ]] && echo " optimize/opt_config did not load.." && exit
	475	[[ $VERBOSITY > 0 ]] && echo "OK"
[a0f0bee]	476	# Validate optimize settings, if required
	477	validate_opt_settings
[1b65a84]	478	fi
	479	#
	480
[877cc6a]	481	# If $BUILDDIR has subdirectories like tools/ or bin/, stop the run
	482	# and notify the user about that.
	483	if [ -d $BUILDDIR/tools -o -d $BUILDDIR/bin ] && [ -z $CLEAN ] ; then
	484	eval "$no_empty_builddir"
	485	fi
	486
	487	# If requested, clean the build directory
	488	clean_builddir
	489
	490	if [[ ! -d $JHALFSDIR ]]; then
	491	mkdir -p $JHALFSDIR
	492	fi
[a0f0bee]	493	#
	494	# Create $BUILDDIR/sources even though it could be created by get_sources()
	495	if [[ ! -d $BUILDDIR/sources ]]; then
	496	mkdir -p $BUILDDIR/sources
	497	fi
	498	#
	499	# Create the log directory
	500	if [[ ! -d $LOGDIR ]]; then
	501	mkdir $LOGDIR
	502	fi
	503	>$LOGDIR/$LOG
	504	#
[a229600]	505	[[ "$TEST" != "0" ]] && [[ ! -d $TESTLOGDIR ]] && install -d -m 1777 $TESTLOGDIR
[a0f0bee]	506	#
[877cc6a]	507	if [[ "$PWD" != "$JHALFSDIR" ]]; then
[a858a78]	508	cp $COMMON_DIR/{makefile-functions,progress_bar.sh} $JHALFSDIR/
[a229600]	509	#
[1b65a84]	510	[[ "$OPTIMIZE" != "0" ]] && cp optimize/opt_override $JHALFSDIR/
[a229600]	511	#
[401f81e]	512	if [[ "$COMPARE" = "y" ]]; then
[45f82718]	513	mkdir -p $JHALFSDIR/extras
	514	cp extras/* $JHALFSDIR/extras
	515	fi
[a0f0bee]	516	#
[877cc6a]	517	if [[ -n "$FILES" ]]; then
[d385453]	518	# pushd/popd necessary to deal with multiple files
[877cc6a]	519	pushd $PACKAGE_DIR 1> /dev/null
	520	cp $FILES $JHALFSDIR/
	521	popd 1> /dev/null
	522	fi
[a0f0bee]	523	#
[401f81e]	524	if [[ "$REPORT" = "y" ]]; then
[1ec8fce]	525	cp $COMMON_DIR/create-sbu_du-report.sh $JHALFSDIR/
[d385453]	526	# After being sure that all looks sane, dump the settings to a file
[1ec8fce]	527	# This file will be used to create the REPORT header
	528	validate_config > $JHALFSDIR/jhalfs.config
[8d0fa35]	529	fi
[a0f0bee]	530	#
[401f81e]	531	[[ "$GETPKG" = "y" ]] && cp $COMMON_DIR/urls.xsl $JHALFSDIR/
[3d1b542]	532	#
[a160d86]	533	cp $COMMON_DIR/packages.xsl $JHALFSDIR/
[1ec8fce]	534	#
[877cc6a]	535	sed 's,FAKEDIR,'$BOOK',' $PACKAGE_DIR/$XSL > $JHALFSDIR/${XSL}
	536	export XSL=$JHALFSDIR/${XSL}
	537	fi
	538
	539	get_book
[21f0a91]	540	echo "${SD_BORDER}${nl_}"
[877cc6a]	541
	542	build_Makefile
[21f0a91]	543	echo "${SD_BORDER}${nl_}"
[877cc6a]	544
	545	run_make

Note: See TracBrowser for help on using the repository browser.

Download in other formats: