Context Navigation

source: master.sh@ 0ad851d

1.0 2.3 2.3.x 2.4 ablfs ablfs-more legacy new_features trunk

Last change on this file since 0ad851d was 0ad851d, checked in by Manuel Canales Esparcia <manuel@…>, 19 years ago
Mixed fix.
Property mode set to `100755`
File size: 12.7 KB

Rev	Line
[877cc6a]	1	#!/bin/bash
	2	# $Id$
	3	set -e
	4
	5
	6	#>>>>>>>>>>>>>>>ERROR TRAPPING >>>>>>>>>>>>>>>>>>>>
	7	#-----------------------#
	8	simple_error() { # Basic error trap.... JUST DIE
	9	#-----------------------#
	10	# If +e then disable text output
	11	if [[ "$-" =~ "e" ]]; then
	12	echo -e "\n${RED}ERROR:${GREEN} basic error trapped!${OFF}\n" >&2
	13	fi
	14	}
	15
	16	see_ya() {
[73e5448]	17	echo -e "\n\t${BOLD}Goodbye and thank you for choosing ${L_arrow}jhalfs${R_arrow}\n"
[877cc6a]	18	}
	19	##### Simple error TRAPS
	20	# ctrl-c SIGINT
	21	# ctrl-y
	22	# ctrl-z SIGTSTP
	23	# SIGHUP 1 HANGUP
	24	# SIGINT 2 INTRERRUPT FROM KEYBOARD Ctrl-C
	25	# SIGQUIT 3
	26	# SIGKILL 9 KILL
	27	# SIGTERM 15 TERMINATION
	28	# SIGSTOP 17,18,23 STOP THE PROCESS
	29	#####
	30	set -e
	31	trap see_ya 0
	32	trap simple_error ERR
	33	trap 'echo -e "\n\n${RED}INTERRUPT${OFF} trapped\n" && exit 2' 1 2 3 15 17 18 23
	34	#>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
	35
	36
	37	if [ ! -L $0 ] ; then
	38	echo "${nl_}${tab_}${BOLD}${RED}This script cannot be called directly: EXITING ${OFF}${nl_}"
	39	exit 1
	40	fi
	41
	42	PROGNAME=$(basename $0)
	43	COMMON_DIR="common"
	44	PACKAGE_DIR=$(echo $PROGNAME \| tr [a-z] [A-Z])
	45	MODULE=$PACKAGE_DIR/master.sh
	46	MODULE_CONFIG=$PACKAGE_DIR/config
	47	VERBOSITY=0
	48
	49	[[ $VERBOSITY > 0 ]] && echo -n "Loading common-functions module..."
	50	source $COMMON_DIR/common-functions
	51	[[ $? > 0 ]] && echo " $COMMON_DIR/common-functions did not load.." && exit
	52	[[ $VERBOSITY > 0 ]] && echo "OK"
	53	#
	54	[[ $VERBOSITY > 0 ]] && echo -n "Loading masterscript conf..."
	55	source $COMMON_DIR/config
	56	[[ $? > 0 ]] && echo "$COMMON_DIR/conf did not load.." && exit
	57	[[ $VERBOSITY > 0 ]] && echo "OK"
	58	#
[45f82718]	59	[[ $VERBOSITY > 0 ]] && echo -n "Loading compare module..."
	60	source $COMMON_DIR/func_compare.sh
	61	[[ $? > 0 ]] && echo "$COMMON_DIR/func_compare.sh did not load.." && exit
	62	[[ $VERBOSITY > 0 ]] && echo "OK"
	63	#
[877cc6a]	64	[[ $VERBOSITY > 0 ]] && echo -n "Loading config module <$MODULE_CONFIG>..."
	65	source $MODULE_CONFIG
	66	[[ $? > 0 ]] && echo "$MODULE_CONFIG did not load.." && exit 1
	67	[[ $VERBOSITY > 0 ]] && echo "OK"
	68	#
	69	[[ $VERBOSITY > 0 ]] && echo -n "Loading code module <$MODULE>..."
	70	source $MODULE
	71	[[ $? > 0 ]] && echo "$MODULE did not load.." && exit 2
	72	[[ $VERBOSITY > 0 ]] && echo "OK"
	73	#
	74	[[ $VERBOSITY > 0 ]] && echo "---------------${nl_}"
	75
	76
	77	#===========================================================
	78	# If the var BOOK contains something then, maybe, it points
	79	# to a working doc.. set WC=1, else 'null'
	80	#===========================================================
	81	WC=${BOOK:+1}
	82	#===========================================================
	83
	84
	85	#*******************************************************************#
	86	[[ $VERBOSITY > 0 ]] && echo -n "Loading function <func_check_version.sh>..."
	87	source $COMMON_DIR/func_check_version.sh
	88	[[ $? > 0 ]] && echo " function module did not load.." && exit 2
	89	[[ $VERBOSITY > 0 ]] && echo "OK"
	90
	91	[[ $VERBOSITY > 0 ]] && echo -n "Loading function <func_validate_configs.sh>..."
	92	source $COMMON_DIR/func_validate_configs.sh
	93	[[ $? > 0 ]] && echo " function module did not load.." && exit 2
	94	[[ $VERBOSITY > 0 ]] && echo "OK"
	95	[[ $VERBOSITY > 0 ]] && echo "---------------${nl_}"
	96
	97
	98	###################################
[45f82718]	99	### MAIN ###
[877cc6a]	100	###################################
	101
	102	# Evaluate any command line switches
	103
	104	while test $# -gt 0 ; do
	105	case $1 in
	106	# Common options for all books
	107	--book \| -B )
	108	test $# = 1 && eval "$exit_missing_arg"
	109	shift
	110	case $1 in
	111	dev* \| SVN \| trunk )
	112	LFSVRS=development
	113	;;
	114	*) if [[ "$PROGNAME" = "lfs" ]]; then
	115	case $1 in
	116	6.1.1 )
	117	echo "For stable 6.1.1 book, please use jhalfs-0.2."
	118	exit 0
	119	;;
[3570c1c]	120	* )
	121	echo "$1 is an unsupported version at this time."
	122	exit 0
	123	;;
[877cc6a]	124	esac
	125	else
	126	echo "The requested version, ${L_arrow} ${BOLD}$1${OFF} ${R_arrow}, is undefined in the ${BOLD}$(echo $PROGNAME \| tr [a-z] [A-Z])${OFF} series."
	127	exit 0
	128	fi
	129	;;
	130	esac
	131	;;
	132
	133	--directory \| -D )
	134	test $# = 1 && eval "$exit_missing_arg"
	135	shift
	136	case $1 in
	137	-* )
	138	echo -e "\n$1 isn't a valid build directory."
	139	echo -e "Directory names can't start with - .\n"
	140	exit 1
	141	;;
	142	* )
	143	BUILDDIR=$1
	144	JHALFSDIR=$BUILDDIR/jhalfs
	145	LOGDIR=$JHALFSDIR/logs
	146	MKFILE=$JHALFSDIR/Makefile
	147	;;
	148	esac
	149	;;
	150
	151	--get-packages \| -G ) HPKG=1 ;;
	152
	153	--help \| -h ) usage \| more && exit ;;
	154
	155	--testsuites \| -T )
	156	test $# = 1 && eval "$exit_missing_arg"
	157	shift
	158	case $1 in
	159	0 \| 1 \| 2 \| 3 )
	160	TEST=$1
	161	;;
	162	* )
	163	echo -e "\n$1 isn't a valid testsuites level value."
	164	echo -e "You must to use 0, 1, 2, or 3.\n"
	165	exit 1
	166	;;
	167	esac
	168	;;
	169
	170	--version \| -V )
	171	echo "$version"
	172	exit 0
	173	;;
	174
	175	--working-copy \| -W )
	176	test $# = 1 && eval "$exit_missing_arg"
	177	shift
	178	case $PROGNAME in # Poor checks. We should find better ones.
	179	lfs)
	180	if [ -f $1/patches.ent ] ; then
	181	WC=1
	182	BOOK=$1
	183	else
	184	echo -e "\nLooks like $1 isn't a LFS working copy."
	185	exit 1
	186	fi
	187	;;
	188	clfs)
	189	if [ -f $1/patches.ent ] && [ -f $1/packages.ent ]; then
	190	WC=1
	191	BOOK=$1
	192	else
	193	echo -e "\nLooks like $1 isn't a CLFS working copy."
	194	exit 1
	195	fi
	196	;;
	197	hlfs)
	198	if [ -f $1/template.xml ] ; then
	199	WC=1
	200	BOOK=$1
	201	else
	202	echo -e "\nLooks like $1 isn't a HLFS working copy."
	203	exit 1
	204	fi
	205	;;
	206	blfs)
	207	if [ -f $1/use-unzip.xml ] ; then
	208	WC=1
	209	BOOK=$1
	210	else
	211	echo -e "\nLooks like $1 isn't a BLFS working copy."
	212	exit 1
	213	fi
	214	;;
	215	esac
	216	;;
	217
	218	# Common options for LFS, CLFS and HLFS
[45f82718]	219	--comparasion \| -C )
	220	test $# = 1 && eval "$exit_missing_arg"
	221	shift
	222	case $1 in
	223	ICA) RUN_ICA=1
	224	RUN_FARCE=0
	225	COMPARE=1
	226	;;
	227	farce) RUN_ICA=0
	228	RUN_FARCE=1
	229	COMPARE=1
	230	;;
	231	both) RUN_ICA=1
	232	RUN_FARCE=1
	233	COMPARE=1
	234	;;
	235	*)
[0ad851d]	236	echo -e "\n$1 is an unknown analysis method."
[45f82718]	237	exit 1
	238	;;
	239	esac
	240	;;
	241
[877cc6a]	242	--fstab \| -F )
	243	test $# = 1 && eval "$exit_missing_arg"
	244	shift
	245	if [ -f $1 ] ; then
	246	FSTAB=$1
	247	else
	248	echo -e "\nFile $1 not found. Verify your command line.\n"
	249	exit 1
	250	fi
	251	;;
	252
	253	--kernel-config \| -K )
	254	test $# = 1 && eval "$exit_missing_arg"
	255	shift
	256	if [ -f $1 ] ; then
	257	CONFIG=$1
	258	else
	259	echo -e "\nFile $1 not found. Verify your command line.\n"
	260	exit 1
	261	fi
	262	;;
	263
	264	--make \| -M ) RUNMAKE=1 ;;
	265
	266	--rebuild \| -R ) CLEAN=1 ;;
	267
	268	# CLFS options
	269	--arch \| -A )
	270	test $# = 1 && eval "$exit_missing_arg"
	271	shift
	272	case $1 in
	273	x86 )
	274	ARCH=x86
	275	TARGET="i686-pc-linux-gnu"
	276	;;
	277	i486 )
	278	ARCH=x86
	279	TARGET="i486-pc-linux-gnu"
	280	;;
	281	i586 )
	282	ARCH=x86
	283	TARGET="i586-pc-linux-gnu"
	284	;;
	285	ppc )
	286	ARCH=ppc
	287	TARGET="powerpc-unknown-linux-gnu"
	288	;;
	289	mips )
	290	ARCH=mips
	291	TARGET="mips-unknown-linux-gnu"
	292	;;
	293	mipsel )
	294	ARCH=mips
	295	TARGET="mipsel-unknown-linux-gnu"
	296	;;
	297	sparc )
	298	ARCH=sparc
	299	TARGET="sparcv9-unknown-linux-gnu"
	300	;;
	301	x86_64-64 )
	302	ARCH=x86_64-64
	303	TARGET="x86_64-unknown-linux-gnu"
	304	;;
	305	mips64-64 )
	306	ARCH=mips64-64
	307	TARGET="mips-unknown-linux-gnu"
	308	;;
	309	mipsel64-64 )
	310	ARCH=mips64-64
	311	TARGET="mipsel-unknown-linux-gnu"
	312	;;
	313	sparc64-64 )
	314	ARCH=sparc64-64
	315	TARGET="sparc64-unknown-linux-gnu"
	316	;;
	317	alpha )
	318	ARCH=alpha
	319	TARGET="alpha-unknown-linux-gnu"
	320	;;
	321	x86_64 )
	322	ARCH=x86_64
	323	TARGET="x86_64-unknown-linux-gnu"
	324	TARGET32="i686-pc-linux-gnu"
	325	;;
	326	mips64 )
	327	ARCH=mips64
	328	TARGET="mips-unknown-linux-gnu"
	329	TARGET32="mips-unknown-linux-gnu"
	330	;;
	331	mipsel64 )
	332	ARCH=mips64
	333	TARGET="mipsel-unknown-linux-gnu"
	334	TARGET32="mipsel-unknown-linux-gnu"
	335	;;
	336	sparc64 )
	337	ARCH=sparc64
	338	TARGET="sparc64-unknown-linux-gnu"
	339	TARGET32="sparcv9-unknown-linux-gnu"
	340	;;
	341	ppc64 )
	342	ARCH=ppc64
	343	TARGET="powerpc64-unknown-linux-gnu"
	344	TARGET32="powerpc-unknown-linux-gnu"
	345	;;
	346	* )
	347	echo -e "\n$1 is an unknown or unsopported arch."
	348	exit 1
	349	;;
	350	esac
	351	;;
	352
	353	--boot-config )
	354	test $# = 1 && eval "$exit_missing_arg"
	355	shift
	356	if [ -f $1 ] ; then
	357	BOOT_CONFIG=$1
	358	else
	359	echo -e "\nFile $1 not found. Verify your command line.\n"
	360	exit 1
	361	fi
	362	;;
	363
	364	--method )
	365	test $# = 1 && eval "$exit_missing_arg"
	366	shift
	367	case $1 in
	368	chroot \| boot )
	369	METHOD=$1
	370	;;
	371	* )
	372	echo -e "\n$1 isn't a valid build method."
	373	exit 1
	374	;;
	375	esac
	376	;;
	377
	378	# HLFS options
	379	--model )
	380	test $# = 1 && eval "$exit_missing_arg"
	381	shift
	382	case $1 in
	383	glibc \| uclibc )
	384	MODEL=$1
	385	;;
	386	* )
	387	echo -e "\n$1 isn't a valid libc model."
	388	exit 1
	389	;;
	390	esac
	391	;;
	392
	393	# BLFS options
	394	--dependencies )
	395	test $# = 1 && eval "$exit_missing_arg"
	396	shift
	397	case $1 in
	398	0 \| 1 \| 2 )
	399	DEPEND=$1
	400	;;
	401	* )
	402	echo -e "\n$1 isn't a valid dependencies level."
	403	exit 1
	404	;;
	405	esac
	406	;;
	407
	408	# Unknown options
	409	* ) usage ;;
	410	esac
	411	shift
	412	done
	413
	414	# Find the download client to use, if not already specified.
	415
	416	if [ -z $DL ] ; then
	417	if [ `type -p wget` ] ; then
	418	DL=wget
	419	elif [ `type -p curl` ] ; then
	420	DL=curl
	421	else
	422	eval "$no_dl_client"
	423	fi
	424	fi
	425
	426	#===================================================
	427	# Set the document location...
	428	# BOOK is either defined in
	429	# xxx.config
	430	# comand line
	431	# default
	432	# If set by conf file or cmd line leave it
	433	# alone otherwise load the default version
	434	#===================================================
	435	BOOK=${BOOK:=$PROGNAME-$LFSVRS}
	436	#===================================================
	437
	438
	439	# Check for minumum gcc and kernel versions
	440	#check_requirements 1 # 0/1 0-do not display values.
	441	echo
	442	check_version "2.6.2" "`uname -r`" "KERNEL"
	443	check_version "3.0" "$BASH_VERSION" "BASH"
	444	check_version "3.0" "`gcc -dumpversion`" "GCC"
	445	tarVer=`tar --version`
	446	check_version "1.15.0" "${tarVer##* }" "TAR"
	447	echo "---------------${nl_}"
	448
	449	validate_config
	450	echo "---------------${nl_}"
	451
	452	echo -n "Are you happy with these settings? yes/no (no): "
	453	read ANSWER
	454	if [ x$ANSWER != "xyes" ] ; then
	455	echo "${nl_}Fix the configuration options and rerun the script.${nl_}"
	456	exit 1
	457	fi
	458	echo "${nl_}---------------${nl_}"
	459
	460	# Prevents setting "-d /" by mistake.
	461
	462	if [ $BUILDDIR = / ] ; then
	463	echo -ne "\nThe root directory can't be used to build LFS.\n\n"
	464	exit 1
	465	fi
	466
	467	# If $BUILDDIR has subdirectories like tools/ or bin/, stop the run
	468	# and notify the user about that.
	469
	470	if [ -d $BUILDDIR/tools -o -d $BUILDDIR/bin ] && [ -z $CLEAN ] ; then
	471	eval "$no_empty_builddir"
	472	fi
	473
	474	# If requested, clean the build directory
	475	clean_builddir
	476
	477	if [[ ! -d $JHALFSDIR ]]; then
	478	mkdir -p $JHALFSDIR
	479	fi
	480
	481	if [[ "$PWD" != "$JHALFSDIR" ]]; then
	482	cp $COMMON_DIR/makefile-functions $JHALFSDIR/
[45f82718]	483	if [[ "$COMPARE" != "0" ]] ; then
	484	mkdir -p $JHALFSDIR/extras
	485	cp extras/* $JHALFSDIR/extras
	486	fi
[877cc6a]	487	if [[ -n "$FILES" ]]; then
	488	# pushd/popd necessary to deal with mulitiple files
	489	pushd $PACKAGE_DIR 1> /dev/null
	490	cp $FILES $JHALFSDIR/
	491	popd 1> /dev/null
	492	fi
[453bef0]	493	[[ "$REPORT" = "1" ]] && cp $COMMON_DIR/create-sbu_du-report.sh $JHALFSDIR/
[877cc6a]	494	sed 's,FAKEDIR,'$BOOK',' $PACKAGE_DIR/$XSL > $JHALFSDIR/${XSL}
	495	export XSL=$JHALFSDIR/${XSL}
	496	fi
	497
	498	if [[ ! -d $LOGDIR ]]; then
	499	mkdir $LOGDIR
	500	fi
[0ac490b]	501
[d9a53e0]	502	# After be sure that all look sane and if REPORT=1, dump the settings to a file
[0ac490b]	503	# This file will be used to create the REPORT header
	504	[[ "$REPORT" = "1" ]] && validate_config > $JHALFSDIR/jhalfs.config
	505
[877cc6a]	506	>$LOGDIR/$LOG
	507
	508	get_book
	509	echo "---------------${nl_}"
	510
	511	build_Makefile
	512	echo "---------------${nl_}"
	513
	514	run_make
	515

Note: See TracBrowser for help on using the repository browser.

Download in other formats: