Context Navigation

source: master.sh@ 141e3ad

1.0 2.3 2.3.x 2.4 ablfs ablfs-more legacy new_features trunk

Last change on this file since 141e3ad was a229600, checked in by Manuel Canales Esparcia <manuel@…>, 18 years ago
Dumped tetsuite logs into a separate dir. Fixed few bugs.
Property mode set to `100755`
File size: 13.3 KB

Rev	Line
[877cc6a]	1	#!/bin/bash
	2	# $Id$
	3	set -e
	4
	5
	6	#>>>>>>>>>>>>>>>ERROR TRAPPING >>>>>>>>>>>>>>>>>>>>
	7	#-----------------------#
	8	simple_error() { # Basic error trap.... JUST DIE
	9	#-----------------------#
	10	# If +e then disable text output
	11	if [[ "$-" =~ "e" ]]; then
	12	echo -e "\n${RED}ERROR:${GREEN} basic error trapped!${OFF}\n" >&2
	13	fi
	14	}
	15
	16	see_ya() {
[73e5448]	17	echo -e "\n\t${BOLD}Goodbye and thank you for choosing ${L_arrow}jhalfs${R_arrow}\n"
[877cc6a]	18	}
	19	##### Simple error TRAPS
	20	# ctrl-c SIGINT
	21	# ctrl-y
	22	# ctrl-z SIGTSTP
	23	# SIGHUP 1 HANGUP
	24	# SIGINT 2 INTRERRUPT FROM KEYBOARD Ctrl-C
	25	# SIGQUIT 3
	26	# SIGKILL 9 KILL
	27	# SIGTERM 15 TERMINATION
	28	# SIGSTOP 17,18,23 STOP THE PROCESS
	29	#####
	30	set -e
	31	trap see_ya 0
	32	trap simple_error ERR
	33	trap 'echo -e "\n\n${RED}INTERRUPT${OFF} trapped\n" && exit 2' 1 2 3 15 17 18 23
	34	#>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
	35
	36
	37	if [ ! -L $0 ] ; then
	38	echo "${nl_}${tab_}${BOLD}${RED}This script cannot be called directly: EXITING ${OFF}${nl_}"
	39	exit 1
	40	fi
	41
	42	PROGNAME=$(basename $0)
	43	COMMON_DIR="common"
	44	PACKAGE_DIR=$(echo $PROGNAME \| tr [a-z] [A-Z])
	45	MODULE=$PACKAGE_DIR/master.sh
	46	MODULE_CONFIG=$PACKAGE_DIR/config
	47	VERBOSITY=0
	48
	49	[[ $VERBOSITY > 0 ]] && echo -n "Loading common-functions module..."
	50	source $COMMON_DIR/common-functions
	51	[[ $? > 0 ]] && echo " $COMMON_DIR/common-functions did not load.." && exit
	52	[[ $VERBOSITY > 0 ]] && echo "OK"
	53	#
	54	[[ $VERBOSITY > 0 ]] && echo -n "Loading masterscript conf..."
	55	source $COMMON_DIR/config
	56	[[ $? > 0 ]] && echo "$COMMON_DIR/conf did not load.." && exit
	57	[[ $VERBOSITY > 0 ]] && echo "OK"
	58	#
	59	[[ $VERBOSITY > 0 ]] && echo -n "Loading config module <$MODULE_CONFIG>..."
	60	source $MODULE_CONFIG
	61	[[ $? > 0 ]] && echo "$MODULE_CONFIG did not load.." && exit 1
	62	[[ $VERBOSITY > 0 ]] && echo "OK"
	63	#
	64	[[ $VERBOSITY > 0 ]] && echo -n "Loading code module <$MODULE>..."
	65	source $MODULE
	66	[[ $? > 0 ]] && echo "$MODULE did not load.." && exit 2
	67	[[ $VERBOSITY > 0 ]] && echo "OK"
	68	#
[21f0a91]	69	[[ $VERBOSITY > 0 ]] && echo "${SD_BORDER}${nl_}"
[877cc6a]	70
	71
	72	#===========================================================
	73	# If the var BOOK contains something then, maybe, it points
	74	# to a working doc.. set WC=1, else 'null'
	75	#===========================================================
	76	WC=${BOOK:+1}
	77	#===========================================================
	78
	79
	80	#*******************************************************************#
	81	[[ $VERBOSITY > 0 ]] && echo -n "Loading function <func_check_version.sh>..."
	82	source $COMMON_DIR/func_check_version.sh
	83	[[ $? > 0 ]] && echo " function module did not load.." && exit 2
	84	[[ $VERBOSITY > 0 ]] && echo "OK"
	85
	86	[[ $VERBOSITY > 0 ]] && echo -n "Loading function <func_validate_configs.sh>..."
	87	source $COMMON_DIR/func_validate_configs.sh
	88	[[ $? > 0 ]] && echo " function module did not load.." && exit 2
	89	[[ $VERBOSITY > 0 ]] && echo "OK"
[21f0a91]	90	[[ $VERBOSITY > 0 ]] && echo "${SD_BORDER}${nl_}"
[877cc6a]	91
	92
	93	###################################
[45f82718]	94	### MAIN ###
[877cc6a]	95	###################################
	96
	97	# Evaluate any command line switches
	98
	99	while test $# -gt 0 ; do
	100	case $1 in
[1ec8fce]	101	# Common options for {C,H}LFS books
[877cc6a]	102	--book \| -B )
	103	test $# = 1 && eval "$exit_missing_arg"
	104	shift
	105	case $1 in
	106	dev* \| SVN \| trunk )
	107	LFSVRS=development
	108	;;
	109	*) if [[ "$PROGNAME" = "lfs" ]]; then
	110	case $1 in
	111	6.1.1 )
	112	echo "For stable 6.1.1 book, please use jhalfs-0.2."
	113	exit 0
	114	;;
[3570c1c]	115	* )
	116	echo "$1 is an unsupported version at this time."
	117	exit 0
	118	;;
[877cc6a]	119	esac
	120	else
	121	echo "The requested version, ${L_arrow} ${BOLD}$1${OFF} ${R_arrow}, is undefined in the ${BOLD}$(echo $PROGNAME \| tr [a-z] [A-Z])${OFF} series."
	122	exit 0
	123	fi
	124	;;
	125	esac
	126	;;
	127
	128	--directory \| -D )
	129	test $# = 1 && eval "$exit_missing_arg"
	130	shift
	131	case $1 in
	132	-* )
	133	echo -e "\n$1 isn't a valid build directory."
	134	echo -e "Directory names can't start with - .\n"
	135	exit 1
	136	;;
	137	* )
	138	BUILDDIR=$1
[1a1f099]	139	JHALFSDIR=$BUILDDIR/${SCRIPT_ROOT}
[877cc6a]	140	LOGDIR=$JHALFSDIR/logs
[a229600]	141	TESTLOGDIR=$JHALFSDIR/test-logs
[877cc6a]	142	MKFILE=$JHALFSDIR/Makefile
	143	;;
	144	esac
	145	;;
	146
[15cad16]	147	--get-packages \| -G ) GETPKG=1 ;;
[877cc6a]	148
	149	--help \| -h ) usage \| more && exit ;;
	150
[1b65a84]	151	--optimize \| -O )
	152	test $# = 1 && eval "$exit_missing_arg"
	153	shift
	154	case $1 in
	155	0 \| 1 \| 2 )
	156	OPTIMIZE=$1
	157	;;
	158	* )
	159	echo -e "\n$1 isn't a valid optimize level value."
	160	echo -e "You must use 0, 1, or 2.\n"
	161	exit 1
	162	;;
	163	esac
	164	;;
	165
[877cc6a]	166	--testsuites \| -T )
	167	test $# = 1 && eval "$exit_missing_arg"
	168	shift
	169	case $1 in
	170	0 \| 1 \| 2 \| 3 )
	171	TEST=$1
	172	;;
	173	* )
	174	echo -e "\n$1 isn't a valid testsuites level value."
	175	echo -e "You must to use 0, 1, 2, or 3.\n"
	176	exit 1
	177	;;
	178	esac
	179	;;
	180
	181	--version \| -V )
	182	echo "$version"
	183	exit 0
	184	;;
	185
	186	--working-copy \| -W )
	187	test $# = 1 && eval "$exit_missing_arg"
	188	shift
	189	case $PROGNAME in # Poor checks. We should find better ones.
	190	lfs)
[4bc3c2b]	191	if [ -d $1/chapter09 ] ; then
[877cc6a]	192	WC=1
	193	BOOK=$1
	194	else
	195	echo -e "\nLooks like $1 isn't a LFS working copy."
	196	exit 1
	197	fi
	198	;;
	199	clfs)
[4bc3c2b]	200	if [ -d $1/cross-tools ] ; then
[877cc6a]	201	WC=1
	202	BOOK=$1
	203	else
	204	echo -e "\nLooks like $1 isn't a CLFS working copy."
	205	exit 1
	206	fi
	207	;;
	208	hlfs)
	209	if [ -f $1/template.xml ] ; then
	210	WC=1
	211	BOOK=$1
	212	else
	213	echo -e "\nLooks like $1 isn't a HLFS working copy."
	214	exit 1
	215	fi
	216	;;
	217	esac
	218	;;
	219
[45f82718]	220	--comparasion \| -C )
	221	test $# = 1 && eval "$exit_missing_arg"
	222	shift
	223	case $1 in
	224	ICA) RUN_ICA=1
	225	RUN_FARCE=0
	226	COMPARE=1
	227	;;
	228	farce) RUN_ICA=0
	229	RUN_FARCE=1
	230	COMPARE=1
	231	;;
	232	both) RUN_ICA=1
	233	RUN_FARCE=1
	234	COMPARE=1
	235	;;
	236	*)
[0ad851d]	237	echo -e "\n$1 is an unknown analysis method."
[45f82718]	238	exit 1
	239	;;
	240	esac
	241	;;
	242
[877cc6a]	243	--fstab \| -F )
	244	test $# = 1 && eval "$exit_missing_arg"
	245	shift
	246	if [ -f $1 ] ; then
	247	FSTAB=$1
	248	else
	249	echo -e "\nFile $1 not found. Verify your command line.\n"
	250	exit 1
	251	fi
	252	;;
	253
	254	--kernel-config \| -K )
	255	test $# = 1 && eval "$exit_missing_arg"
	256	shift
	257	if [ -f $1 ] ; then
	258	CONFIG=$1
	259	else
	260	echo -e "\nFile $1 not found. Verify your command line.\n"
	261	exit 1
	262	fi
	263	;;
	264
	265	--make \| -M ) RUNMAKE=1 ;;
	266
	267	--rebuild \| -R ) CLEAN=1 ;;
	268
	269	# CLFS options
	270	--arch \| -A )
	271	test $# = 1 && eval "$exit_missing_arg"
	272	shift
	273	case $1 in
	274	x86 )
	275	ARCH=x86
	276	TARGET="i686-pc-linux-gnu"
	277	;;
	278	i486 )
	279	ARCH=x86
	280	TARGET="i486-pc-linux-gnu"
	281	;;
	282	i586 )
	283	ARCH=x86
	284	TARGET="i586-pc-linux-gnu"
	285	;;
	286	ppc )
	287	ARCH=ppc
	288	TARGET="powerpc-unknown-linux-gnu"
	289	;;
	290	mips )
	291	ARCH=mips
	292	TARGET="mips-unknown-linux-gnu"
	293	;;
	294	mipsel )
	295	ARCH=mips
	296	TARGET="mipsel-unknown-linux-gnu"
	297	;;
	298	sparc )
	299	ARCH=sparc
	300	TARGET="sparcv9-unknown-linux-gnu"
	301	;;
	302	x86_64-64 )
	303	ARCH=x86_64-64
	304	TARGET="x86_64-unknown-linux-gnu"
	305	;;
	306	mips64-64 )
	307	ARCH=mips64-64
	308	TARGET="mips-unknown-linux-gnu"
	309	;;
	310	mipsel64-64 )
	311	ARCH=mips64-64
	312	TARGET="mipsel-unknown-linux-gnu"
	313	;;
	314	sparc64-64 )
	315	ARCH=sparc64-64
	316	TARGET="sparc64-unknown-linux-gnu"
	317	;;
	318	alpha )
	319	ARCH=alpha
	320	TARGET="alpha-unknown-linux-gnu"
	321	;;
	322	x86_64 )
	323	ARCH=x86_64
	324	TARGET="x86_64-unknown-linux-gnu"
	325	TARGET32="i686-pc-linux-gnu"
	326	;;
	327	mips64 )
	328	ARCH=mips64
	329	TARGET="mips-unknown-linux-gnu"
	330	TARGET32="mips-unknown-linux-gnu"
	331	;;
	332	mipsel64 )
	333	ARCH=mips64
	334	TARGET="mipsel-unknown-linux-gnu"
	335	TARGET32="mipsel-unknown-linux-gnu"
	336	;;
	337	sparc64 )
	338	ARCH=sparc64
	339	TARGET="sparc64-unknown-linux-gnu"
	340	TARGET32="sparcv9-unknown-linux-gnu"
	341	;;
	342	ppc64 )
	343	ARCH=ppc64
	344	TARGET="powerpc64-unknown-linux-gnu"
	345	TARGET32="powerpc-unknown-linux-gnu"
	346	;;
	347	* )
	348	echo -e "\n$1 is an unknown or unsopported arch."
	349	exit 1
	350	;;
	351	esac
	352	;;
	353
	354	--boot-config )
	355	test $# = 1 && eval "$exit_missing_arg"
	356	shift
	357	if [ -f $1 ] ; then
	358	BOOT_CONFIG=$1
	359	else
	360	echo -e "\nFile $1 not found. Verify your command line.\n"
	361	exit 1
	362	fi
	363	;;
	364
	365	--method )
	366	test $# = 1 && eval "$exit_missing_arg"
	367	shift
	368	case $1 in
	369	chroot \| boot )
	370	METHOD=$1
	371	;;
	372	* )
	373	echo -e "\n$1 isn't a valid build method."
	374	exit 1
	375	;;
	376	esac
	377	;;
	378
	379	# HLFS options
	380	--model )
	381	test $# = 1 && eval "$exit_missing_arg"
	382	shift
	383	case $1 in
	384	glibc \| uclibc )
	385	MODEL=$1
	386	;;
	387	* )
	388	echo -e "\n$1 isn't a valid libc model."
	389	exit 1
	390	;;
	391	esac
	392	;;
	393
	394	# Unknown options
	395	* ) usage ;;
	396	esac
	397	shift
	398	done
	399
	400	#===================================================
	401	# Set the document location...
	402	# BOOK is either defined in
	403	# xxx.config
	404	# comand line
	405	# default
	406	# If set by conf file or cmd line leave it
	407	# alone otherwise load the default version
	408	#===================================================
	409	BOOK=${BOOK:=$PROGNAME-$LFSVRS}
	410	#===================================================
	411
	412
	413	# Check for minumum gcc and kernel versions
	414	#check_requirements 1 # 0/1 0-do not display values.
	415	echo
	416	check_version "2.6.2" "`uname -r`" "KERNEL"
	417	check_version "3.0" "$BASH_VERSION" "BASH"
	418	check_version "3.0" "`gcc -dumpversion`" "GCC"
[27f165a]	419	tarVer=`tar --version \| head -n1 \| cut -d " " -f4`
	420	check_version "1.15.0" "${tarVer}" "TAR"
[21f0a91]	421	echo "${SD_BORDER}${nl_}"
[877cc6a]	422
	423	validate_config
[21f0a91]	424	echo "${SD_BORDER}${nl_}"
[877cc6a]	425	echo -n "Are you happy with these settings? yes/no (no): "
	426	read ANSWER
	427	if [ x$ANSWER != "xyes" ] ; then
	428	echo "${nl_}Fix the configuration options and rerun the script.${nl_}"
	429	exit 1
	430	fi
[21f0a91]	431	echo "${nl_}${SD_BORDER}${nl_}"
[877cc6a]	432
[a0f0bee]	433	# Load additional modules or configuration files based on global settings
[1ee8ad5]	434	# compare module
	435	if [[ "$COMPARE" = "1" ]]; then
	436	[[ $VERBOSITY > 0 ]] && echo -n "Loading compare module..."
	437	source $COMMON_DIR/func_compare.sh
	438	[[ $? > 0 ]] && echo "$COMMON_DIR/func_compare.sh did not load.." && exit
	439	[[ $VERBOSITY > 0 ]] && echo "OK"
	440	fi
[1b65a84]	441	#
	442	# optimize module
	443	if [[ "$OPTIMIZE" != "0" ]]; then
	444	[[ $VERBOSITY > 0 ]] && echo -n "Loading optimization module..."
	445	source optimize/optimize_functions
	446	[[ $? > 0 ]] && echo " optimize/optimize_functions did not load.." && exit
	447	[[ $VERBOSITY > 0 ]] && echo "OK"
[a0f0bee]	448	#
	449	# optimize configurations
[1b65a84]	450	[[ $VERBOSITY > 0 ]] && echo -n "Loading optimization config..."
	451	source optimize/opt_config
	452	[[ $? > 0 ]] && echo " optimize/opt_config did not load.." && exit
	453	[[ $VERBOSITY > 0 ]] && echo "OK"
[a0f0bee]	454	# Validate optimize settings, if required
	455	validate_opt_settings
[1b65a84]	456	fi
	457	#
	458
[877cc6a]	459	# If $BUILDDIR has subdirectories like tools/ or bin/, stop the run
	460	# and notify the user about that.
	461	if [ -d $BUILDDIR/tools -o -d $BUILDDIR/bin ] && [ -z $CLEAN ] ; then
	462	eval "$no_empty_builddir"
	463	fi
	464
	465	# If requested, clean the build directory
	466	clean_builddir
	467
	468	if [[ ! -d $JHALFSDIR ]]; then
	469	mkdir -p $JHALFSDIR
	470	fi
[a0f0bee]	471	#
	472	# Create $BUILDDIR/sources even though it could be created by get_sources()
	473	if [[ ! -d $BUILDDIR/sources ]]; then
	474	mkdir -p $BUILDDIR/sources
	475	fi
	476	#
	477	# Create the log directory
	478	if [[ ! -d $LOGDIR ]]; then
	479	mkdir $LOGDIR
	480	fi
	481	>$LOGDIR/$LOG
	482	#
[a229600]	483	[[ "$TEST" != "0" ]] && [[ ! -d $TESTLOGDIR ]] && install -d -m 1777 $TESTLOGDIR
[a0f0bee]	484	#
[877cc6a]	485	if [[ "$PWD" != "$JHALFSDIR" ]]; then
[a858a78]	486	cp $COMMON_DIR/{makefile-functions,progress_bar.sh} $JHALFSDIR/
[a229600]	487	#
[1b65a84]	488	[[ "$OPTIMIZE" != "0" ]] && cp optimize/opt_override $JHALFSDIR/
[a229600]	489	#
[45f82718]	490	if [[ "$COMPARE" != "0" ]] ; then
	491	mkdir -p $JHALFSDIR/extras
	492	cp extras/* $JHALFSDIR/extras
	493	fi
[a0f0bee]	494	#
[877cc6a]	495	if [[ -n "$FILES" ]]; then
	496	# pushd/popd necessary to deal with mulitiple files
	497	pushd $PACKAGE_DIR 1> /dev/null
	498	cp $FILES $JHALFSDIR/
	499	popd 1> /dev/null
	500	fi
[a0f0bee]	501	#
[1ec8fce]	502	if [[ "$REPORT" = "1" ]]; then
	503	cp $COMMON_DIR/create-sbu_du-report.sh $JHALFSDIR/
	504	# After be sure that all look sane, dump the settings to a file
	505	# This file will be used to create the REPORT header
	506	validate_config > $JHALFSDIR/jhalfs.config
[8d0fa35]	507	fi
[a0f0bee]	508	#
[1ec8fce]	509	[[ "$GETPKG" = "1" ]] && cp $COMMON_DIR/urls.xsl $JHALFSDIR/
	510	#
[877cc6a]	511	sed 's,FAKEDIR,'$BOOK',' $PACKAGE_DIR/$XSL > $JHALFSDIR/${XSL}
	512	export XSL=$JHALFSDIR/${XSL}
	513	fi
	514
	515	get_book
[21f0a91]	516	echo "${SD_BORDER}${nl_}"
[877cc6a]	517
	518	build_Makefile
[21f0a91]	519	echo "${SD_BORDER}${nl_}"
[877cc6a]	520
	521	run_make

Note: See TracBrowser for help on using the repository browser.

Download in other formats: