Context Navigation

source: master.sh@ bb9ff59

1.0 2.3 2.3.x 2.4 ablfs ablfs-more legacy new_features trunk

Last change on this file since bb9ff59 was 1b65a84, checked in by Manuel Canales Esparcia <manuel@…>, 19 years ago
Merged optimize code from experimental branch.
Property mode set to `100755`
File size: 13.8 KB

Rev	Line
[877cc6a]	1	#!/bin/bash
	2	# $Id$
	3	set -e
	4
	5
	6	#>>>>>>>>>>>>>>>ERROR TRAPPING >>>>>>>>>>>>>>>>>>>>
	7	#-----------------------#
	8	simple_error() { # Basic error trap.... JUST DIE
	9	#-----------------------#
	10	# If +e then disable text output
	11	if [[ "$-" =~ "e" ]]; then
	12	echo -e "\n${RED}ERROR:${GREEN} basic error trapped!${OFF}\n" >&2
	13	fi
	14	}
	15
	16	see_ya() {
[73e5448]	17	echo -e "\n\t${BOLD}Goodbye and thank you for choosing ${L_arrow}jhalfs${R_arrow}\n"
[877cc6a]	18	}
	19	##### Simple error TRAPS
	20	# ctrl-c SIGINT
	21	# ctrl-y
	22	# ctrl-z SIGTSTP
	23	# SIGHUP 1 HANGUP
	24	# SIGINT 2 INTRERRUPT FROM KEYBOARD Ctrl-C
	25	# SIGQUIT 3
	26	# SIGKILL 9 KILL
	27	# SIGTERM 15 TERMINATION
	28	# SIGSTOP 17,18,23 STOP THE PROCESS
	29	#####
	30	set -e
	31	trap see_ya 0
	32	trap simple_error ERR
	33	trap 'echo -e "\n\n${RED}INTERRUPT${OFF} trapped\n" && exit 2' 1 2 3 15 17 18 23
	34	#>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
	35
	36
	37	if [ ! -L $0 ] ; then
	38	echo "${nl_}${tab_}${BOLD}${RED}This script cannot be called directly: EXITING ${OFF}${nl_}"
	39	exit 1
	40	fi
	41
	42	PROGNAME=$(basename $0)
	43	COMMON_DIR="common"
	44	PACKAGE_DIR=$(echo $PROGNAME \| tr [a-z] [A-Z])
	45	MODULE=$PACKAGE_DIR/master.sh
	46	MODULE_CONFIG=$PACKAGE_DIR/config
	47	VERBOSITY=0
	48
	49	[[ $VERBOSITY > 0 ]] && echo -n "Loading common-functions module..."
	50	source $COMMON_DIR/common-functions
	51	[[ $? > 0 ]] && echo " $COMMON_DIR/common-functions did not load.." && exit
	52	[[ $VERBOSITY > 0 ]] && echo "OK"
	53	#
	54	[[ $VERBOSITY > 0 ]] && echo -n "Loading masterscript conf..."
	55	source $COMMON_DIR/config
	56	[[ $? > 0 ]] && echo "$COMMON_DIR/conf did not load.." && exit
	57	[[ $VERBOSITY > 0 ]] && echo "OK"
	58	#
	59	[[ $VERBOSITY > 0 ]] && echo -n "Loading config module <$MODULE_CONFIG>..."
	60	source $MODULE_CONFIG
	61	[[ $? > 0 ]] && echo "$MODULE_CONFIG did not load.." && exit 1
	62	[[ $VERBOSITY > 0 ]] && echo "OK"
	63	#
	64	[[ $VERBOSITY > 0 ]] && echo -n "Loading code module <$MODULE>..."
	65	source $MODULE
	66	[[ $? > 0 ]] && echo "$MODULE did not load.." && exit 2
	67	[[ $VERBOSITY > 0 ]] && echo "OK"
	68	#
[21f0a91]	69	[[ $VERBOSITY > 0 ]] && echo "${SD_BORDER}${nl_}"
[877cc6a]	70
	71
	72	#===========================================================
	73	# If the var BOOK contains something then, maybe, it points
	74	# to a working doc.. set WC=1, else 'null'
	75	#===========================================================
	76	WC=${BOOK:+1}
	77	#===========================================================
	78
	79
	80	#*******************************************************************#
	81	[[ $VERBOSITY > 0 ]] && echo -n "Loading function <func_check_version.sh>..."
	82	source $COMMON_DIR/func_check_version.sh
	83	[[ $? > 0 ]] && echo " function module did not load.." && exit 2
	84	[[ $VERBOSITY > 0 ]] && echo "OK"
	85
	86	[[ $VERBOSITY > 0 ]] && echo -n "Loading function <func_validate_configs.sh>..."
	87	source $COMMON_DIR/func_validate_configs.sh
	88	[[ $? > 0 ]] && echo " function module did not load.." && exit 2
	89	[[ $VERBOSITY > 0 ]] && echo "OK"
[21f0a91]	90	[[ $VERBOSITY > 0 ]] && echo "${SD_BORDER}${nl_}"
[877cc6a]	91
	92
	93	###################################
[45f82718]	94	### MAIN ###
[877cc6a]	95	###################################
	96
	97	# Evaluate any command line switches
	98
	99	while test $# -gt 0 ; do
	100	case $1 in
	101	# Common options for all books
	102	--book \| -B )
	103	test $# = 1 && eval "$exit_missing_arg"
	104	shift
	105	case $1 in
	106	dev* \| SVN \| trunk )
	107	LFSVRS=development
	108	;;
	109	*) if [[ "$PROGNAME" = "lfs" ]]; then
	110	case $1 in
	111	6.1.1 )
	112	echo "For stable 6.1.1 book, please use jhalfs-0.2."
	113	exit 0
	114	;;
[3570c1c]	115	* )
	116	echo "$1 is an unsupported version at this time."
	117	exit 0
	118	;;
[877cc6a]	119	esac
	120	else
	121	echo "The requested version, ${L_arrow} ${BOLD}$1${OFF} ${R_arrow}, is undefined in the ${BOLD}$(echo $PROGNAME \| tr [a-z] [A-Z])${OFF} series."
	122	exit 0
	123	fi
	124	;;
	125	esac
	126	;;
	127
	128	--directory \| -D )
	129	test $# = 1 && eval "$exit_missing_arg"
	130	shift
	131	case $1 in
	132	-* )
	133	echo -e "\n$1 isn't a valid build directory."
	134	echo -e "Directory names can't start with - .\n"
	135	exit 1
	136	;;
	137	* )
	138	BUILDDIR=$1
	139	JHALFSDIR=$BUILDDIR/jhalfs
	140	LOGDIR=$JHALFSDIR/logs
	141	MKFILE=$JHALFSDIR/Makefile
	142	;;
	143	esac
	144	;;
	145
[15cad16]	146	--get-packages \| -G ) GETPKG=1 ;;
[877cc6a]	147
	148	--help \| -h ) usage \| more && exit ;;
	149
[1b65a84]	150	--optimize \| -O )
	151	test $# = 1 && eval "$exit_missing_arg"
	152	shift
	153	case $1 in
	154	0 \| 1 \| 2 )
	155	OPTIMIZE=$1
	156	;;
	157	* )
	158	echo -e "\n$1 isn't a valid optimize level value."
	159	echo -e "You must use 0, 1, or 2.\n"
	160	exit 1
	161	;;
	162	esac
	163	;;
	164
[877cc6a]	165	--testsuites \| -T )
	166	test $# = 1 && eval "$exit_missing_arg"
	167	shift
	168	case $1 in
	169	0 \| 1 \| 2 \| 3 )
	170	TEST=$1
	171	;;
	172	* )
	173	echo -e "\n$1 isn't a valid testsuites level value."
	174	echo -e "You must to use 0, 1, 2, or 3.\n"
	175	exit 1
	176	;;
	177	esac
	178	;;
	179
	180	--version \| -V )
	181	echo "$version"
	182	exit 0
	183	;;
	184
	185	--working-copy \| -W )
	186	test $# = 1 && eval "$exit_missing_arg"
	187	shift
	188	case $PROGNAME in # Poor checks. We should find better ones.
	189	lfs)
	190	if [ -f $1/patches.ent ] ; then
	191	WC=1
	192	BOOK=$1
	193	else
	194	echo -e "\nLooks like $1 isn't a LFS working copy."
	195	exit 1
	196	fi
	197	;;
	198	clfs)
	199	if [ -f $1/patches.ent ] && [ -f $1/packages.ent ]; then
	200	WC=1
	201	BOOK=$1
	202	else
	203	echo -e "\nLooks like $1 isn't a CLFS working copy."
	204	exit 1
	205	fi
	206	;;
	207	hlfs)
	208	if [ -f $1/template.xml ] ; then
	209	WC=1
	210	BOOK=$1
	211	else
	212	echo -e "\nLooks like $1 isn't a HLFS working copy."
	213	exit 1
	214	fi
	215	;;
	216	blfs)
	217	if [ -f $1/use-unzip.xml ] ; then
	218	WC=1
	219	BOOK=$1
	220	else
	221	echo -e "\nLooks like $1 isn't a BLFS working copy."
	222	exit 1
	223	fi
	224	;;
	225	esac
	226	;;
	227
	228	# Common options for LFS, CLFS and HLFS
[45f82718]	229	--comparasion \| -C )
	230	test $# = 1 && eval "$exit_missing_arg"
	231	shift
	232	case $1 in
	233	ICA) RUN_ICA=1
	234	RUN_FARCE=0
	235	COMPARE=1
	236	;;
	237	farce) RUN_ICA=0
	238	RUN_FARCE=1
	239	COMPARE=1
	240	;;
	241	both) RUN_ICA=1
	242	RUN_FARCE=1
	243	COMPARE=1
	244	;;
	245	*)
[0ad851d]	246	echo -e "\n$1 is an unknown analysis method."
[45f82718]	247	exit 1
	248	;;
	249	esac
	250	;;
	251
[877cc6a]	252	--fstab \| -F )
	253	test $# = 1 && eval "$exit_missing_arg"
	254	shift
	255	if [ -f $1 ] ; then
	256	FSTAB=$1
	257	else
	258	echo -e "\nFile $1 not found. Verify your command line.\n"
	259	exit 1
	260	fi
	261	;;
	262
	263	--kernel-config \| -K )
	264	test $# = 1 && eval "$exit_missing_arg"
	265	shift
	266	if [ -f $1 ] ; then
	267	CONFIG=$1
	268	else
	269	echo -e "\nFile $1 not found. Verify your command line.\n"
	270	exit 1
	271	fi
	272	;;
	273
	274	--make \| -M ) RUNMAKE=1 ;;
	275
	276	--rebuild \| -R ) CLEAN=1 ;;
	277
	278	# CLFS options
	279	--arch \| -A )
	280	test $# = 1 && eval "$exit_missing_arg"
	281	shift
	282	case $1 in
	283	x86 )
	284	ARCH=x86
	285	TARGET="i686-pc-linux-gnu"
	286	;;
	287	i486 )
	288	ARCH=x86
	289	TARGET="i486-pc-linux-gnu"
	290	;;
	291	i586 )
	292	ARCH=x86
	293	TARGET="i586-pc-linux-gnu"
	294	;;
	295	ppc )
	296	ARCH=ppc
	297	TARGET="powerpc-unknown-linux-gnu"
	298	;;
	299	mips )
	300	ARCH=mips
	301	TARGET="mips-unknown-linux-gnu"
	302	;;
	303	mipsel )
	304	ARCH=mips
	305	TARGET="mipsel-unknown-linux-gnu"
	306	;;
	307	sparc )
	308	ARCH=sparc
	309	TARGET="sparcv9-unknown-linux-gnu"
	310	;;
	311	x86_64-64 )
	312	ARCH=x86_64-64
	313	TARGET="x86_64-unknown-linux-gnu"
	314	;;
	315	mips64-64 )
	316	ARCH=mips64-64
	317	TARGET="mips-unknown-linux-gnu"
	318	;;
	319	mipsel64-64 )
	320	ARCH=mips64-64
	321	TARGET="mipsel-unknown-linux-gnu"
	322	;;
	323	sparc64-64 )
	324	ARCH=sparc64-64
	325	TARGET="sparc64-unknown-linux-gnu"
	326	;;
	327	alpha )
	328	ARCH=alpha
	329	TARGET="alpha-unknown-linux-gnu"
	330	;;
	331	x86_64 )
	332	ARCH=x86_64
	333	TARGET="x86_64-unknown-linux-gnu"
	334	TARGET32="i686-pc-linux-gnu"
	335	;;
	336	mips64 )
	337	ARCH=mips64
	338	TARGET="mips-unknown-linux-gnu"
	339	TARGET32="mips-unknown-linux-gnu"
	340	;;
	341	mipsel64 )
	342	ARCH=mips64
	343	TARGET="mipsel-unknown-linux-gnu"
	344	TARGET32="mipsel-unknown-linux-gnu"
	345	;;
	346	sparc64 )
	347	ARCH=sparc64
	348	TARGET="sparc64-unknown-linux-gnu"
	349	TARGET32="sparcv9-unknown-linux-gnu"
	350	;;
	351	ppc64 )
	352	ARCH=ppc64
	353	TARGET="powerpc64-unknown-linux-gnu"
	354	TARGET32="powerpc-unknown-linux-gnu"
	355	;;
	356	* )
	357	echo -e "\n$1 is an unknown or unsopported arch."
	358	exit 1
	359	;;
	360	esac
	361	;;
	362
	363	--boot-config )
	364	test $# = 1 && eval "$exit_missing_arg"
	365	shift
	366	if [ -f $1 ] ; then
	367	BOOT_CONFIG=$1
	368	else
	369	echo -e "\nFile $1 not found. Verify your command line.\n"
	370	exit 1
	371	fi
	372	;;
	373
	374	--method )
	375	test $# = 1 && eval "$exit_missing_arg"
	376	shift
	377	case $1 in
	378	chroot \| boot )
	379	METHOD=$1
	380	;;
	381	* )
	382	echo -e "\n$1 isn't a valid build method."
	383	exit 1
	384	;;
	385	esac
	386	;;
	387
	388	# HLFS options
	389	--model )
	390	test $# = 1 && eval "$exit_missing_arg"
	391	shift
	392	case $1 in
	393	glibc \| uclibc )
	394	MODEL=$1
	395	;;
	396	* )
	397	echo -e "\n$1 isn't a valid libc model."
	398	exit 1
	399	;;
	400	esac
	401	;;
	402
	403	# BLFS options
	404	--dependencies )
	405	test $# = 1 && eval "$exit_missing_arg"
	406	shift
	407	case $1 in
	408	0 \| 1 \| 2 )
	409	DEPEND=$1
	410	;;
	411	* )
	412	echo -e "\n$1 isn't a valid dependencies level."
	413	exit 1
	414	;;
	415	esac
	416	;;
	417
	418	# Unknown options
	419	* ) usage ;;
	420	esac
	421	shift
	422	done
	423
	424	#===================================================
	425	# Set the document location...
	426	# BOOK is either defined in
	427	# xxx.config
	428	# comand line
	429	# default
	430	# If set by conf file or cmd line leave it
	431	# alone otherwise load the default version
	432	#===================================================
	433	BOOK=${BOOK:=$PROGNAME-$LFSVRS}
	434	#===================================================
	435
	436
	437	# Check for minumum gcc and kernel versions
	438	#check_requirements 1 # 0/1 0-do not display values.
	439	echo
	440	check_version "2.6.2" "`uname -r`" "KERNEL"
	441	check_version "3.0" "$BASH_VERSION" "BASH"
	442	check_version "3.0" "`gcc -dumpversion`" "GCC"
	443	tarVer=`tar --version`
	444	check_version "1.15.0" "${tarVer##* }" "TAR"
[21f0a91]	445	echo "${SD_BORDER}${nl_}"
[877cc6a]	446
	447	validate_config
[21f0a91]	448	echo "${SD_BORDER}${nl_}"
[877cc6a]	449
	450	echo -n "Are you happy with these settings? yes/no (no): "
	451	read ANSWER
	452	if [ x$ANSWER != "xyes" ] ; then
	453	echo "${nl_}Fix the configuration options and rerun the script.${nl_}"
	454	exit 1
	455	fi
[21f0a91]	456	echo "${nl_}${SD_BORDER}${nl_}"
[877cc6a]	457
[1ee8ad5]	458	# Loadd additional modules or configuration files based on global settings
	459	# compare module
	460	if [[ "$COMPARE" = "1" ]]; then
	461	[[ $VERBOSITY > 0 ]] && echo -n "Loading compare module..."
	462	source $COMMON_DIR/func_compare.sh
	463	[[ $? > 0 ]] && echo "$COMMON_DIR/func_compare.sh did not load.." && exit
	464	[[ $VERBOSITY > 0 ]] && echo "OK"
	465	fi
[1b65a84]	466	#
	467	# optimize module
	468	if [[ "$OPTIMIZE" != "0" ]]; then
	469	[[ $VERBOSITY > 0 ]] && echo -n "Loading optimization module..."
	470	source optimize/optimize_functions
	471	[[ $? > 0 ]] && echo " optimize/optimize_functions did not load.." && exit
	472	[[ $VERBOSITY > 0 ]] && echo "OK"
	473	fi
	474	#
	475	# optimize configurations
	476	if [[ "$OPTIMIZE" != "0" ]]; then
	477	[[ $VERBOSITY > 0 ]] && echo -n "Loading optimization config..."
	478	source optimize/opt_config
	479	[[ $? > 0 ]] && echo " optimize/opt_config did not load.." && exit
	480	[[ $VERBOSITY > 0 ]] && echo "OK"
	481	fi
	482	#
	483
	484	# Validate optimize settings, if required
	485	[[ "$OPTIMIZE" != "0" ]] && validate_opt_settings
[1ee8ad5]	486
[877cc6a]	487	# Prevents setting "-d /" by mistake.
	488
	489	if [ $BUILDDIR = / ] ; then
	490	echo -ne "\nThe root directory can't be used to build LFS.\n\n"
	491	exit 1
	492	fi
	493
	494	# If $BUILDDIR has subdirectories like tools/ or bin/, stop the run
	495	# and notify the user about that.
	496
	497	if [ -d $BUILDDIR/tools -o -d $BUILDDIR/bin ] && [ -z $CLEAN ] ; then
	498	eval "$no_empty_builddir"
	499	fi
	500
	501	# If requested, clean the build directory
	502	clean_builddir
	503
	504	if [[ ! -d $JHALFSDIR ]]; then
	505	mkdir -p $JHALFSDIR
	506	fi
	507
	508	if [[ "$PWD" != "$JHALFSDIR" ]]; then
	509	cp $COMMON_DIR/makefile-functions $JHALFSDIR/
[1b65a84]	510	[[ "$OPTIMIZE" != "0" ]] && cp optimize/opt_override $JHALFSDIR/
[45f82718]	511	if [[ "$COMPARE" != "0" ]] ; then
	512	mkdir -p $JHALFSDIR/extras
	513	cp extras/* $JHALFSDIR/extras
	514	fi
[877cc6a]	515	if [[ -n "$FILES" ]]; then
	516	# pushd/popd necessary to deal with mulitiple files
	517	pushd $PACKAGE_DIR 1> /dev/null
	518	cp $FILES $JHALFSDIR/
	519	popd 1> /dev/null
	520	fi
[8d0fa35]	521	if [[ "$PROGNAME" != "blfs" ]]; then
	522	[[ "$REPORT" = "1" ]] && cp $COMMON_DIR/create-sbu_du-report.sh $JHALFSDIR/
	523	[[ "$GETPKG" = "1" ]] && cp $COMMON_DIR/urls.xsl $JHALFSDIR/
	524	fi
[877cc6a]	525	sed 's,FAKEDIR,'$BOOK',' $PACKAGE_DIR/$XSL > $JHALFSDIR/${XSL}
	526	export XSL=$JHALFSDIR/${XSL}
	527	fi
	528
	529	if [[ ! -d $LOGDIR ]]; then
	530	mkdir $LOGDIR
	531	fi
[0ac490b]	532
[d9a53e0]	533	# After be sure that all look sane and if REPORT=1, dump the settings to a file
[0ac490b]	534	# This file will be used to create the REPORT header
[8d0fa35]	535	[[ "$PROGNAME" != "blfs" ]] && [[ "$REPORT" = "1" ]] && validate_config > $JHALFSDIR/jhalfs.config
[0ac490b]	536
[877cc6a]	537	>$LOGDIR/$LOG
	538
	539	get_book
[21f0a91]	540	echo "${SD_BORDER}${nl_}"
[877cc6a]	541
	542	build_Makefile
[21f0a91]	543	echo "${SD_BORDER}${nl_}"
[877cc6a]	544
	545	run_make
	546

Note: See TracBrowser for help on using the repository browser.

Download in other formats: