Context Navigation

source: master.sh@ d29584b

1.0 2.3 2.3.x 2.4 ablfs ablfs-more legacy new_features trunk

Last change on this file since d29584b was 1ee8ad5, checked in by Manuel Canales Esparcia <manuel@…>, 19 years ago
Load additional modules or configuration files only is requested.
Property mode set to `100755`
File size: 12.7 KB

Rev	Line
[877cc6a]	1	#!/bin/bash
	2	# $Id$
	3	set -e
	4
	5
	6	#>>>>>>>>>>>>>>>ERROR TRAPPING >>>>>>>>>>>>>>>>>>>>
	7	#-----------------------#
	8	simple_error() { # Basic error trap.... JUST DIE
	9	#-----------------------#
	10	# If +e then disable text output
	11	if [[ "$-" =~ "e" ]]; then
	12	echo -e "\n${RED}ERROR:${GREEN} basic error trapped!${OFF}\n" >&2
	13	fi
	14	}
	15
	16	see_ya() {
[73e5448]	17	echo -e "\n\t${BOLD}Goodbye and thank you for choosing ${L_arrow}jhalfs${R_arrow}\n"
[877cc6a]	18	}
	19	##### Simple error TRAPS
	20	# ctrl-c SIGINT
	21	# ctrl-y
	22	# ctrl-z SIGTSTP
	23	# SIGHUP 1 HANGUP
	24	# SIGINT 2 INTRERRUPT FROM KEYBOARD Ctrl-C
	25	# SIGQUIT 3
	26	# SIGKILL 9 KILL
	27	# SIGTERM 15 TERMINATION
	28	# SIGSTOP 17,18,23 STOP THE PROCESS
	29	#####
	30	set -e
	31	trap see_ya 0
	32	trap simple_error ERR
	33	trap 'echo -e "\n\n${RED}INTERRUPT${OFF} trapped\n" && exit 2' 1 2 3 15 17 18 23
	34	#>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
	35
	36
	37	if [ ! -L $0 ] ; then
	38	echo "${nl_}${tab_}${BOLD}${RED}This script cannot be called directly: EXITING ${OFF}${nl_}"
	39	exit 1
	40	fi
	41
	42	PROGNAME=$(basename $0)
	43	COMMON_DIR="common"
	44	PACKAGE_DIR=$(echo $PROGNAME \| tr [a-z] [A-Z])
	45	MODULE=$PACKAGE_DIR/master.sh
	46	MODULE_CONFIG=$PACKAGE_DIR/config
	47	VERBOSITY=0
	48
	49	[[ $VERBOSITY > 0 ]] && echo -n "Loading common-functions module..."
	50	source $COMMON_DIR/common-functions
	51	[[ $? > 0 ]] && echo " $COMMON_DIR/common-functions did not load.." && exit
	52	[[ $VERBOSITY > 0 ]] && echo "OK"
	53	#
	54	[[ $VERBOSITY > 0 ]] && echo -n "Loading masterscript conf..."
	55	source $COMMON_DIR/config
	56	[[ $? > 0 ]] && echo "$COMMON_DIR/conf did not load.." && exit
	57	[[ $VERBOSITY > 0 ]] && echo "OK"
	58	#
	59	[[ $VERBOSITY > 0 ]] && echo -n "Loading config module <$MODULE_CONFIG>..."
	60	source $MODULE_CONFIG
	61	[[ $? > 0 ]] && echo "$MODULE_CONFIG did not load.." && exit 1
	62	[[ $VERBOSITY > 0 ]] && echo "OK"
	63	#
	64	[[ $VERBOSITY > 0 ]] && echo -n "Loading code module <$MODULE>..."
	65	source $MODULE
	66	[[ $? > 0 ]] && echo "$MODULE did not load.." && exit 2
	67	[[ $VERBOSITY > 0 ]] && echo "OK"
	68	#
[21f0a91]	69	[[ $VERBOSITY > 0 ]] && echo "${SD_BORDER}${nl_}"
[877cc6a]	70
	71
	72	#===========================================================
	73	# If the var BOOK contains something then, maybe, it points
	74	# to a working doc.. set WC=1, else 'null'
	75	#===========================================================
	76	WC=${BOOK:+1}
	77	#===========================================================
	78
	79
	80	#*******************************************************************#
	81	[[ $VERBOSITY > 0 ]] && echo -n "Loading function <func_check_version.sh>..."
	82	source $COMMON_DIR/func_check_version.sh
	83	[[ $? > 0 ]] && echo " function module did not load.." && exit 2
	84	[[ $VERBOSITY > 0 ]] && echo "OK"
	85
	86	[[ $VERBOSITY > 0 ]] && echo -n "Loading function <func_validate_configs.sh>..."
	87	source $COMMON_DIR/func_validate_configs.sh
	88	[[ $? > 0 ]] && echo " function module did not load.." && exit 2
	89	[[ $VERBOSITY > 0 ]] && echo "OK"
[21f0a91]	90	[[ $VERBOSITY > 0 ]] && echo "${SD_BORDER}${nl_}"
[877cc6a]	91
	92
	93	###################################
[45f82718]	94	### MAIN ###
[877cc6a]	95	###################################
	96
	97	# Evaluate any command line switches
	98
	99	while test $# -gt 0 ; do
	100	case $1 in
	101	# Common options for all books
	102	--book \| -B )
	103	test $# = 1 && eval "$exit_missing_arg"
	104	shift
	105	case $1 in
	106	dev* \| SVN \| trunk )
	107	LFSVRS=development
	108	;;
	109	*) if [[ "$PROGNAME" = "lfs" ]]; then
	110	case $1 in
	111	6.1.1 )
	112	echo "For stable 6.1.1 book, please use jhalfs-0.2."
	113	exit 0
	114	;;
[3570c1c]	115	* )
	116	echo "$1 is an unsupported version at this time."
	117	exit 0
	118	;;
[877cc6a]	119	esac
	120	else
	121	echo "The requested version, ${L_arrow} ${BOLD}$1${OFF} ${R_arrow}, is undefined in the ${BOLD}$(echo $PROGNAME \| tr [a-z] [A-Z])${OFF} series."
	122	exit 0
	123	fi
	124	;;
	125	esac
	126	;;
	127
	128	--directory \| -D )
	129	test $# = 1 && eval "$exit_missing_arg"
	130	shift
	131	case $1 in
	132	-* )
	133	echo -e "\n$1 isn't a valid build directory."
	134	echo -e "Directory names can't start with - .\n"
	135	exit 1
	136	;;
	137	* )
	138	BUILDDIR=$1
	139	JHALFSDIR=$BUILDDIR/jhalfs
	140	LOGDIR=$JHALFSDIR/logs
	141	MKFILE=$JHALFSDIR/Makefile
	142	;;
	143	esac
	144	;;
	145
[15cad16]	146	--get-packages \| -G ) GETPKG=1 ;;
[877cc6a]	147
	148	--help \| -h ) usage \| more && exit ;;
	149
	150	--testsuites \| -T )
	151	test $# = 1 && eval "$exit_missing_arg"
	152	shift
	153	case $1 in
	154	0 \| 1 \| 2 \| 3 )
	155	TEST=$1
	156	;;
	157	* )
	158	echo -e "\n$1 isn't a valid testsuites level value."
	159	echo -e "You must to use 0, 1, 2, or 3.\n"
	160	exit 1
	161	;;
	162	esac
	163	;;
	164
	165	--version \| -V )
	166	echo "$version"
	167	exit 0
	168	;;
	169
	170	--working-copy \| -W )
	171	test $# = 1 && eval "$exit_missing_arg"
	172	shift
	173	case $PROGNAME in # Poor checks. We should find better ones.
	174	lfs)
	175	if [ -f $1/patches.ent ] ; then
	176	WC=1
	177	BOOK=$1
	178	else
	179	echo -e "\nLooks like $1 isn't a LFS working copy."
	180	exit 1
	181	fi
	182	;;
	183	clfs)
	184	if [ -f $1/patches.ent ] && [ -f $1/packages.ent ]; then
	185	WC=1
	186	BOOK=$1
	187	else
	188	echo -e "\nLooks like $1 isn't a CLFS working copy."
	189	exit 1
	190	fi
	191	;;
	192	hlfs)
	193	if [ -f $1/template.xml ] ; then
	194	WC=1
	195	BOOK=$1
	196	else
	197	echo -e "\nLooks like $1 isn't a HLFS working copy."
	198	exit 1
	199	fi
	200	;;
	201	blfs)
	202	if [ -f $1/use-unzip.xml ] ; then
	203	WC=1
	204	BOOK=$1
	205	else
	206	echo -e "\nLooks like $1 isn't a BLFS working copy."
	207	exit 1
	208	fi
	209	;;
	210	esac
	211	;;
	212
	213	# Common options for LFS, CLFS and HLFS
[45f82718]	214	--comparasion \| -C )
	215	test $# = 1 && eval "$exit_missing_arg"
	216	shift
	217	case $1 in
	218	ICA) RUN_ICA=1
	219	RUN_FARCE=0
	220	COMPARE=1
	221	;;
	222	farce) RUN_ICA=0
	223	RUN_FARCE=1
	224	COMPARE=1
	225	;;
	226	both) RUN_ICA=1
	227	RUN_FARCE=1
	228	COMPARE=1
	229	;;
	230	*)
[0ad851d]	231	echo -e "\n$1 is an unknown analysis method."
[45f82718]	232	exit 1
	233	;;
	234	esac
	235	;;
	236
[877cc6a]	237	--fstab \| -F )
	238	test $# = 1 && eval "$exit_missing_arg"
	239	shift
	240	if [ -f $1 ] ; then
	241	FSTAB=$1
	242	else
	243	echo -e "\nFile $1 not found. Verify your command line.\n"
	244	exit 1
	245	fi
	246	;;
	247
	248	--kernel-config \| -K )
	249	test $# = 1 && eval "$exit_missing_arg"
	250	shift
	251	if [ -f $1 ] ; then
	252	CONFIG=$1
	253	else
	254	echo -e "\nFile $1 not found. Verify your command line.\n"
	255	exit 1
	256	fi
	257	;;
	258
	259	--make \| -M ) RUNMAKE=1 ;;
	260
	261	--rebuild \| -R ) CLEAN=1 ;;
	262
	263	# CLFS options
	264	--arch \| -A )
	265	test $# = 1 && eval "$exit_missing_arg"
	266	shift
	267	case $1 in
	268	x86 )
	269	ARCH=x86
	270	TARGET="i686-pc-linux-gnu"
	271	;;
	272	i486 )
	273	ARCH=x86
	274	TARGET="i486-pc-linux-gnu"
	275	;;
	276	i586 )
	277	ARCH=x86
	278	TARGET="i586-pc-linux-gnu"
	279	;;
	280	ppc )
	281	ARCH=ppc
	282	TARGET="powerpc-unknown-linux-gnu"
	283	;;
	284	mips )
	285	ARCH=mips
	286	TARGET="mips-unknown-linux-gnu"
	287	;;
	288	mipsel )
	289	ARCH=mips
	290	TARGET="mipsel-unknown-linux-gnu"
	291	;;
	292	sparc )
	293	ARCH=sparc
	294	TARGET="sparcv9-unknown-linux-gnu"
	295	;;
	296	x86_64-64 )
	297	ARCH=x86_64-64
	298	TARGET="x86_64-unknown-linux-gnu"
	299	;;
	300	mips64-64 )
	301	ARCH=mips64-64
	302	TARGET="mips-unknown-linux-gnu"
	303	;;
	304	mipsel64-64 )
	305	ARCH=mips64-64
	306	TARGET="mipsel-unknown-linux-gnu"
	307	;;
	308	sparc64-64 )
	309	ARCH=sparc64-64
	310	TARGET="sparc64-unknown-linux-gnu"
	311	;;
	312	alpha )
	313	ARCH=alpha
	314	TARGET="alpha-unknown-linux-gnu"
	315	;;
	316	x86_64 )
	317	ARCH=x86_64
	318	TARGET="x86_64-unknown-linux-gnu"
	319	TARGET32="i686-pc-linux-gnu"
	320	;;
	321	mips64 )
	322	ARCH=mips64
	323	TARGET="mips-unknown-linux-gnu"
	324	TARGET32="mips-unknown-linux-gnu"
	325	;;
	326	mipsel64 )
	327	ARCH=mips64
	328	TARGET="mipsel-unknown-linux-gnu"
	329	TARGET32="mipsel-unknown-linux-gnu"
	330	;;
	331	sparc64 )
	332	ARCH=sparc64
	333	TARGET="sparc64-unknown-linux-gnu"
	334	TARGET32="sparcv9-unknown-linux-gnu"
	335	;;
	336	ppc64 )
	337	ARCH=ppc64
	338	TARGET="powerpc64-unknown-linux-gnu"
	339	TARGET32="powerpc-unknown-linux-gnu"
	340	;;
	341	* )
	342	echo -e "\n$1 is an unknown or unsopported arch."
	343	exit 1
	344	;;
	345	esac
	346	;;
	347
	348	--boot-config )
	349	test $# = 1 && eval "$exit_missing_arg"
	350	shift
	351	if [ -f $1 ] ; then
	352	BOOT_CONFIG=$1
	353	else
	354	echo -e "\nFile $1 not found. Verify your command line.\n"
	355	exit 1
	356	fi
	357	;;
	358
	359	--method )
	360	test $# = 1 && eval "$exit_missing_arg"
	361	shift
	362	case $1 in
	363	chroot \| boot )
	364	METHOD=$1
	365	;;
	366	* )
	367	echo -e "\n$1 isn't a valid build method."
	368	exit 1
	369	;;
	370	esac
	371	;;
	372
	373	# HLFS options
	374	--model )
	375	test $# = 1 && eval "$exit_missing_arg"
	376	shift
	377	case $1 in
	378	glibc \| uclibc )
	379	MODEL=$1
	380	;;
	381	* )
	382	echo -e "\n$1 isn't a valid libc model."
	383	exit 1
	384	;;
	385	esac
	386	;;
	387
	388	# BLFS options
	389	--dependencies )
	390	test $# = 1 && eval "$exit_missing_arg"
	391	shift
	392	case $1 in
	393	0 \| 1 \| 2 )
	394	DEPEND=$1
	395	;;
	396	* )
	397	echo -e "\n$1 isn't a valid dependencies level."
	398	exit 1
	399	;;
	400	esac
	401	;;
	402
	403	# Unknown options
	404	* ) usage ;;
	405	esac
	406	shift
	407	done
	408
	409	#===================================================
	410	# Set the document location...
	411	# BOOK is either defined in
	412	# xxx.config
	413	# comand line
	414	# default
	415	# If set by conf file or cmd line leave it
	416	# alone otherwise load the default version
	417	#===================================================
	418	BOOK=${BOOK:=$PROGNAME-$LFSVRS}
	419	#===================================================
	420
	421
	422	# Check for minumum gcc and kernel versions
	423	#check_requirements 1 # 0/1 0-do not display values.
	424	echo
	425	check_version "2.6.2" "`uname -r`" "KERNEL"
	426	check_version "3.0" "$BASH_VERSION" "BASH"
	427	check_version "3.0" "`gcc -dumpversion`" "GCC"
	428	tarVer=`tar --version`
	429	check_version "1.15.0" "${tarVer##* }" "TAR"
[21f0a91]	430	echo "${SD_BORDER}${nl_}"
[877cc6a]	431
	432	validate_config
[21f0a91]	433	echo "${SD_BORDER}${nl_}"
[877cc6a]	434
	435	echo -n "Are you happy with these settings? yes/no (no): "
	436	read ANSWER
	437	if [ x$ANSWER != "xyes" ] ; then
	438	echo "${nl_}Fix the configuration options and rerun the script.${nl_}"
	439	exit 1
	440	fi
[21f0a91]	441	echo "${nl_}${SD_BORDER}${nl_}"
[877cc6a]	442
[1ee8ad5]	443	# Loadd additional modules or configuration files based on global settings
	444	# compare module
	445	if [[ "$COMPARE" = "1" ]]; then
	446	[[ $VERBOSITY > 0 ]] && echo -n "Loading compare module..."
	447	source $COMMON_DIR/func_compare.sh
	448	[[ $? > 0 ]] && echo "$COMMON_DIR/func_compare.sh did not load.." && exit
	449	[[ $VERBOSITY > 0 ]] && echo "OK"
	450	fi
	451
[877cc6a]	452	# Prevents setting "-d /" by mistake.
	453
	454	if [ $BUILDDIR = / ] ; then
	455	echo -ne "\nThe root directory can't be used to build LFS.\n\n"
	456	exit 1
	457	fi
	458
	459	# If $BUILDDIR has subdirectories like tools/ or bin/, stop the run
	460	# and notify the user about that.
	461
	462	if [ -d $BUILDDIR/tools -o -d $BUILDDIR/bin ] && [ -z $CLEAN ] ; then
	463	eval "$no_empty_builddir"
	464	fi
	465
	466	# If requested, clean the build directory
	467	clean_builddir
	468
	469	if [[ ! -d $JHALFSDIR ]]; then
	470	mkdir -p $JHALFSDIR
	471	fi
	472
	473	if [[ "$PWD" != "$JHALFSDIR" ]]; then
	474	cp $COMMON_DIR/makefile-functions $JHALFSDIR/
[45f82718]	475	if [[ "$COMPARE" != "0" ]] ; then
	476	mkdir -p $JHALFSDIR/extras
	477	cp extras/* $JHALFSDIR/extras
	478	fi
[877cc6a]	479	if [[ -n "$FILES" ]]; then
	480	# pushd/popd necessary to deal with mulitiple files
	481	pushd $PACKAGE_DIR 1> /dev/null
	482	cp $FILES $JHALFSDIR/
	483	popd 1> /dev/null
	484	fi
[453bef0]	485	[[ "$REPORT" = "1" ]] && cp $COMMON_DIR/create-sbu_du-report.sh $JHALFSDIR/
[15cad16]	486	[[ "$GETPKG" = "1" ]] && cp $COMMON_DIR/urls.xsl $JHALFSDIR/
[877cc6a]	487	sed 's,FAKEDIR,'$BOOK',' $PACKAGE_DIR/$XSL > $JHALFSDIR/${XSL}
	488	export XSL=$JHALFSDIR/${XSL}
	489	fi
	490
	491	if [[ ! -d $LOGDIR ]]; then
	492	mkdir $LOGDIR
	493	fi
[0ac490b]	494
[d9a53e0]	495	# After be sure that all look sane and if REPORT=1, dump the settings to a file
[0ac490b]	496	# This file will be used to create the REPORT header
	497	[[ "$REPORT" = "1" ]] && validate_config > $JHALFSDIR/jhalfs.config
	498
[877cc6a]	499	>$LOGDIR/$LOG
	500
	501	get_book
[21f0a91]	502	echo "${SD_BORDER}${nl_}"
[877cc6a]	503
	504	build_Makefile
[21f0a91]	505	echo "${SD_BORDER}${nl_}"
[877cc6a]	506
	507	run_make
	508

Note: See TracBrowser for help on using the repository browser.

Download in other formats: