source: master.sh@ d2f9373

2.3 2.3.x 2.4 ablfs ablfs-more legacy new_features trunk
Last change on this file since d2f9373 was d2f9373, checked in by George Boudreau <georgeb@…>, 18 years ago

LOG definition got lost
  • Property mode set to 100755
File size: 14.9 KB
RevLine 
[877cc6a]1#!/bin/bash
2# $Id$
3set -e
4
5
6#>>>>>>>>>>>>>>>ERROR TRAPPING >>>>>>>>>>>>>>>>>>>>
7#-----------------------#
8simple_error() { # Basic error trap.... JUST DIE
9#-----------------------#
10 # If +e then disable text output
11 if [[ "$-" =~ "e" ]]; then
12 echo -e "\n${RED}ERROR:${GREEN} basic error trapped!${OFF}\n" >&2
13 fi
14}
15
16see_ya() {
[fdb330a]17 echo -e "\n${L_arrow}${BOLD}jhalfs${R_arrow} exit${OFF}\n"
[877cc6a]18}
19##### Simple error TRAPS
20# ctrl-c SIGINT
21# ctrl-y
22# ctrl-z SIGTSTP
23# SIGHUP 1 HANGUP
24# SIGINT 2 INTRERRUPT FROM KEYBOARD Ctrl-C
25# SIGQUIT 3
26# SIGKILL 9 KILL
27# SIGTERM 15 TERMINATION
28# SIGSTOP 17,18,23 STOP THE PROCESS
29#####
30set -e
31trap see_ya 0
32trap simple_error ERR
33trap 'echo -e "\n\n${RED}INTERRUPT${OFF} trapped\n" && exit 2' 1 2 3 15 17 18 23
34#>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
35
36
37if [ ! -L $0 ] ; then
38 echo "${nl_}${tab_}${BOLD}${RED}This script cannot be called directly: EXITING ${OFF}${nl_}"
39 exit 1
40fi
41
42 PROGNAME=$(basename $0)
43 COMMON_DIR="common"
44 PACKAGE_DIR=$(echo $PROGNAME | tr [a-z] [A-Z])
45 MODULE=$PACKAGE_DIR/master.sh
46MODULE_CONFIG=$PACKAGE_DIR/config
[d2f9373]47 VERBOSITY=1
[877cc6a]48
49
[a705708]50if [[ -e using_menuconfig ]]; then
51 [[ $VERBOSITY > 0 ]] && echo -n "Loading config params from <configuration>..."
52 source configuration
53 [[ $? > 0 ]] && echo "file:configuration did not load.." && exit 1
54 [[ $VERBOSITY > 0 ]] && echo "OK"
55
[d2f9373]56 #--- CONSTANTS
57 declare -r SVN="svn://svn.linuxfromscratch.org"
58 declare -r LOG=000-masterscript.log
[a705708]59 #--- Working directories
60 SCRIPT_ROOT=jhalfs
61 JHALFSDIR=$BUILDDIR/$SCRIPT_ROOT
62 LOGDIR=$JHALFSDIR/logs
63 TESTLOGDIR=$JHALFSDIR/test-logs
64 MKFILE=$JHALFSDIR/Makefile
65 #--- ICA report log directory
66 ICALOGDIR=$LOGDIR/ICA
67 #--- farce report log directory
68 FARCELOGDIR=$LOGDIR/farce
[401f81e]69 XSL=$PROGNAME.xsl
70
71 case $PROGNAME in
72 clfs2) LFSVRS=development; TREE=branches/clfs-2.0/BOOK ;;
73 *) LFSVRS=development; TREE=trunk/BOOK ;;
74 esac
[a705708]75
76 if [[ ! -z ${BRANCH_ID} ]]; then
77 case $BRANCH_ID in
78 dev* | SVN | trunk )
79 case $PROGNAME in
80 clfs2 ) TREE=branches/clfs-2.0/BOOK ;;
81 *) TREE=trunk/BOOK ;;
82 esac
83 LFSVRS=development
84 ;;
85 branch-* )
86 LFSVRS=${BRANCH_ID}
87 TREE=branches/${BRANCH_ID#branch-}/BOOK
88 ;;
89 * )
90 case $PROGNAME in
91 lfs | hlfs )
92 LFSVRS=${BRANCH_ID}
93 TREE=tags/${BRANCH_ID}/BOOK
94 ;;
95 clfs | clfs2 )
96 LFSVRS=${BRANCH_ID}
97 TREE=tags/${BRANCH_ID}
98 ;;
99 esac
100 ;;
101 esac
102 fi
[401f81e]103 # These are boolean vars generated from Config.in.
104 # ISSUE: If a boolean parameter is not set <true> that
105 # variable is not defined by the menu app. This can
106 # cause a headache if you are not careful.
107 # The following parameters MUST be created and have a
108 # default value.
109 RUNMAKE=${RUNMAKE:-n}
110 GETPKG=${GETPKG:-n}
111 GETKERNEL=${GETKERNEL:-n}
112 COMPARE=${COMPARE:-n}
113 RUN_FARCE=${RUN_FARCE:-n}
114 RUN_ICA=${RUN_ICA:-n}
115 BOMB_TEST=${BOMB_TEST:-n}
116 STRIP=${STRIP:=n}
117 REPORT=${REPORT:=n}
118 VIMLANG=${VIMLANG:-n}
119 KEYMAP=${KEYMAP:=none}
120 GRSECURITY_HOST=${GRSECURITY_HOST:-n}
121
122else
123 #
124 [[ $VERBOSITY > 0 ]] && echo -n "Loading masterscript conf..."
125 source $COMMON_DIR/config
126 [[ $? > 0 ]] && echo "$COMMON_DIR/conf did not load.." && exit
127 [[ $VERBOSITY > 0 ]] && echo "OK"
128 #
129 [[ $VERBOSITY > 0 ]] && echo -n "Loading config module <$MODULE_CONFIG>..."
130 source $MODULE_CONFIG
131 [[ $? > 0 ]] && echo "$MODULE_CONFIG did not load.." && exit 1
132 [[ $VERBOSITY > 0 ]] && echo "OK"
133 #
[a705708]134fi
[877cc6a]135
[401f81e]136
137[[ $VERBOSITY > 0 ]] && echo -n "Loading common-functions module..."
138source $COMMON_DIR/common-functions
139[[ $? > 0 ]] && echo " $COMMON_DIR/common-functions did not load.." && exit
140[[ $VERBOSITY > 0 ]] && echo "OK"
141[[ $VERBOSITY > 0 ]] && echo -n "Loading code module <$MODULE>..."
142source $MODULE
143[[ $? > 0 ]] && echo "$MODULE did not load.." && exit 2
144[[ $VERBOSITY > 0 ]] && echo "OK"
145#
146[[ $VERBOSITY > 0 ]] && echo "${SD_BORDER}${nl_}"
147
148
[877cc6a]149#===========================================================
150# If the var BOOK contains something then, maybe, it points
151# to a working doc.. set WC=1, else 'null'
152#===========================================================
153WC=${BOOK:+1}
154#===========================================================
155
156
157#*******************************************************************#
158[[ $VERBOSITY > 0 ]] && echo -n "Loading function <func_check_version.sh>..."
159source $COMMON_DIR/func_check_version.sh
160[[ $? > 0 ]] && echo " function module did not load.." && exit 2
161[[ $VERBOSITY > 0 ]] && echo "OK"
162
163[[ $VERBOSITY > 0 ]] && echo -n "Loading function <func_validate_configs.sh>..."
164source $COMMON_DIR/func_validate_configs.sh
165[[ $? > 0 ]] && echo " function module did not load.." && exit 2
166[[ $VERBOSITY > 0 ]] && echo "OK"
[21f0a91]167[[ $VERBOSITY > 0 ]] && echo "${SD_BORDER}${nl_}"
[877cc6a]168
169
170###################################
[45f82718]171### MAIN ###
[877cc6a]172###################################
173
174# Evaluate any command line switches
175
176while test $# -gt 0 ; do
177 case $1 in
[1ec8fce]178 # Common options for {C,H}LFS books
[877cc6a]179 --book | -B )
180 test $# = 1 && eval "$exit_missing_arg"
181 shift
182 case $1 in
183 dev* | SVN | trunk )
184 LFSVRS=development
[a6655ff]185 TREE=trunk/BOOK
[877cc6a]186 ;;
[a6655ff]187 branch-* )
188 LFSVRS=$1
189 TREE=branches/${1#branch-}/BOOK
190 ;;
191 * )
192 case $PROGNAME in
193 lfs | hlfs )
194 LFSVRS=$1
195 TREE=tags/$1/BOOK
196 ;;
197 clfs )
198 LFSVRS=$1
199 TREE=tags/$1
200 ;;
201 esac
[877cc6a]202 ;;
203 esac
204 ;;
205
206 --directory | -D )
207 test $# = 1 && eval "$exit_missing_arg"
208 shift
209 case $1 in
210 -* )
211 echo -e "\n$1 isn't a valid build directory."
212 echo -e "Directory names can't start with - .\n"
213 exit 1
214 ;;
215 * )
216 BUILDDIR=$1
[1a1f099]217 JHALFSDIR=$BUILDDIR/${SCRIPT_ROOT}
[877cc6a]218 LOGDIR=$JHALFSDIR/logs
[a229600]219 TESTLOGDIR=$JHALFSDIR/test-logs
[877cc6a]220 MKFILE=$JHALFSDIR/Makefile
221 ;;
222 esac
223 ;;
224
[401f81e]225 --get-packages | -G ) GETPKG=y ;;
[877cc6a]226
227 --help | -h ) usage | more && exit ;;
228
[1b65a84]229 --optimize | -O )
230 test $# = 1 && eval "$exit_missing_arg"
231 shift
232 case $1 in
233 0 | 1 | 2 )
234 OPTIMIZE=$1
235 ;;
236 * )
237 echo -e "\n$1 isn't a valid optimize level value."
238 echo -e "You must use 0, 1, or 2.\n"
239 exit 1
240 ;;
241 esac
242 ;;
243
[877cc6a]244 --testsuites | -T )
245 test $# = 1 && eval "$exit_missing_arg"
246 shift
247 case $1 in
248 0 | 1 | 2 | 3 )
249 TEST=$1
250 ;;
251 * )
252 echo -e "\n$1 isn't a valid testsuites level value."
253 echo -e "You must to use 0, 1, 2, or 3.\n"
254 exit 1
255 ;;
256 esac
257 ;;
258
259 --version | -V )
260 echo "$version"
261 exit 0
262 ;;
263
264 --working-copy | -W )
265 test $# = 1 && eval "$exit_missing_arg"
266 shift
267 case $PROGNAME in # Poor checks. We should find better ones.
268 lfs)
[4bc3c2b]269 if [ -d $1/chapter09 ] ; then
[877cc6a]270 WC=1
271 BOOK=$1
272 else
[d385453]273 echo -e "\nLooks like $1 isn't an LFS working copy."
[877cc6a]274 exit 1
275 fi
276 ;;
277 clfs)
[4bc3c2b]278 if [ -d $1/cross-tools ] ; then
[877cc6a]279 WC=1
280 BOOK=$1
281 else
282 echo -e "\nLooks like $1 isn't a CLFS working copy."
283 exit 1
284 fi
285 ;;
286 hlfs)
287 if [ -f $1/template.xml ] ; then
288 WC=1
289 BOOK=$1
290 else
[d385453]291 echo -e "\nLooks like $1 isn't an HLFS working copy."
[877cc6a]292 exit 1
293 fi
294 ;;
295 esac
296 ;;
297
[d385453]298 --comparison | -C )
[45f82718]299 test $# = 1 && eval "$exit_missing_arg"
300 shift
301 case $1 in
[401f81e]302 ICA) RUN_ICA=y; RUN_FARCE=n; COMPARE=y ;;
303 farce) RUN_ICA=n; RUN_FARCE=y; COMPARE=y ;;
304 both) RUN_ICA=y; RUN_FARCE=y; COMPARE=y ;;
[45f82718]305 *)
[0ad851d]306 echo -e "\n$1 is an unknown analysis method."
[45f82718]307 exit 1
308 ;;
309 esac
310 ;;
311
[877cc6a]312 --fstab | -F )
313 test $# = 1 && eval "$exit_missing_arg"
314 shift
315 if [ -f $1 ] ; then
316 FSTAB=$1
317 else
318 echo -e "\nFile $1 not found. Verify your command line.\n"
319 exit 1
320 fi
321 ;;
322
323 --kernel-config | -K )
324 test $# = 1 && eval "$exit_missing_arg"
325 shift
326 if [ -f $1 ] ; then
327 CONFIG=$1
328 else
329 echo -e "\nFile $1 not found. Verify your command line.\n"
330 exit 1
331 fi
332 ;;
333
[401f81e]334 --run-make | -M ) RUNMAKE=y ;;
[877cc6a]335
[401f81e]336 --rebuild | -R ) CLEAN=y ;;
[877cc6a]337
338 # CLFS options
339 --arch | -A )
340 test $# = 1 && eval "$exit_missing_arg"
341 shift
[401f81e]342 case $PROGNAME in
343 CLFS2)
344 case $1 in
345 arm) ARCH=arm; TARGET="arm-unknown-linux-gnu" ;;
346 x86) ARCH=x86; TARGET="i686-pc-linux-gnu" ;;
347 *) echo -e "\n$1 is an unknown or unsupported arch."; exit 1
348 esac
349 ;;
350 CLFS)
351 case $1 in
352 arm ) ARCH=arm; TARGET="arm-unknown-linux-gnu" ;;
353 x86 ) ARCH=x86; TARGET="i686-pc-linux-gnu" ;;
354 i486 ) ARCH=x86; TARGET="i486-pc-linux-gnu" ;;
355 i586 ) ARCH=x86; TARGET="i586-pc-linux-gnu" ;;
356 ppc ) ARCH=ppc; TARGET="powerpc-unknown-linux-gnu" ;;
357 mips ) ARCH=mips; TARGET="mips-unknown-linux-gnu" ;;
358 mipsel ) ARCH=mips; TARGET="mipsel-unknown-linux-gnu" ;;
359 sparc ) ARCH=sparc; TARGET="sparcv9-unknown-linux-gnu" ;;
360
361 x86_64-64 ) ARCH=x86_64-64; TARGET="x86_64-unknown-linux-gnu" ;;
362 mips64-64 ) ARCH=mips64-64; TARGET="mips-unknown-linux-gnu" ;;
363 mipsel64-64 ) ARCH=mips64-64; TARGET="mipsel-unknown-linux-gnu" ;;
364 sparc64-64 ) ARCH=sparc64-64; TARGET="sparc64-unknown-linux-gnu" ;;
365 alpha ) ARCH=alpha; TARGET="alpha-unknown-linux-gnu" ;;
366
367 x86_64 ) ARCH=x86_64; TARGET="x86_64-unknown-linux-gnu"; TARGET32="i686-pc-linux-gnu" ;;
368 mips64 ) ARCH=mips64; TARGET="mips-unknown-linux-gnu"; TARGET32="mips-unknown-linux-gnu" ;;
369 mipsel64 ) ARCH=mips64; TARGET="mipsel-unknown-linux-gnu"; TARGET32="mipsel-unknown-linux-gnu" ;;
370 sparc64 ) ARCH=sparc64; TARGET="sparc64-unknown-linux-gnu"; TARGET32="sparcv9-unknown-linux-gnu" ;;
371 ppc64 ) ARCH=ppc64; TARGET="powerpc64-unknown-linux-gnu"; TARGET32="powerpc-unknown-linux-gnu" ;;
372
373 * ) echo -e "\n$1 is an unknown or unsupported arch."; exit 1 ;;
374 esac
375 ;;
[877cc6a]376 esac
377 ;;
378
379 --boot-config )
380 test $# = 1 && eval "$exit_missing_arg"
381 shift
382 if [ -f $1 ] ; then
383 BOOT_CONFIG=$1
384 else
385 echo -e "\nFile $1 not found. Verify your command line.\n"
386 exit 1
387 fi
388 ;;
389
390 --method )
391 test $# = 1 && eval "$exit_missing_arg"
392 shift
393 case $1 in
394 chroot | boot )
395 METHOD=$1
396 ;;
397 * )
398 echo -e "\n$1 isn't a valid build method."
399 exit 1
400 ;;
401 esac
402 ;;
403
404 # HLFS options
405 --model )
406 test $# = 1 && eval "$exit_missing_arg"
407 shift
408 case $1 in
409 glibc | uclibc )
410 MODEL=$1
411 ;;
412 * )
413 echo -e "\n$1 isn't a valid libc model."
414 exit 1
415 ;;
416 esac
417 ;;
418
419 # Unknown options
420 * ) usage ;;
421 esac
422 shift
423done
424
[401f81e]425
[877cc6a]426#===================================================
427# Set the document location...
428# BOOK is either defined in
429# xxx.config
430# comand line
431# default
432# If set by conf file or cmd line leave it
433# alone otherwise load the default version
434#===================================================
435BOOK=${BOOK:=$PROGNAME-$LFSVRS}
436#===================================================
437
438
[401f81e]439# Check for minimum bash,tar,gcc and kernel versions
[877cc6a]440echo
441check_version "2.6.2" "`uname -r`" "KERNEL"
442check_version "3.0" "$BASH_VERSION" "BASH"
443check_version "3.0" "`gcc -dumpversion`" "GCC"
[27f165a]444tarVer=`tar --version | head -n1 | cut -d " " -f4`
445check_version "1.15.0" "${tarVer}" "TAR"
[21f0a91]446echo "${SD_BORDER}${nl_}"
[877cc6a]447
448validate_config
[21f0a91]449echo "${SD_BORDER}${nl_}"
[877cc6a]450echo -n "Are you happy with these settings? yes/no (no): "
451read ANSWER
452if [ x$ANSWER != "xyes" ] ; then
453 echo "${nl_}Fix the configuration options and rerun the script.${nl_}"
454 exit 1
455fi
[21f0a91]456echo "${nl_}${SD_BORDER}${nl_}"
[877cc6a]457
[a0f0bee]458# Load additional modules or configuration files based on global settings
[1ee8ad5]459# compare module
[401f81e]460if [[ "$COMPARE" = "y" ]]; then
[1ee8ad5]461 [[ $VERBOSITY > 0 ]] && echo -n "Loading compare module..."
462 source $COMMON_DIR/func_compare.sh
463 [[ $? > 0 ]] && echo "$COMMON_DIR/func_compare.sh did not load.." && exit
464 [[ $VERBOSITY > 0 ]] && echo "OK"
465fi
[1b65a84]466#
467# optimize module
468if [[ "$OPTIMIZE" != "0" ]]; then
469 [[ $VERBOSITY > 0 ]] && echo -n "Loading optimization module..."
470 source optimize/optimize_functions
471 [[ $? > 0 ]] && echo " optimize/optimize_functions did not load.." && exit
472 [[ $VERBOSITY > 0 ]] && echo "OK"
[a0f0bee]473 #
474 # optimize configurations
[1b65a84]475 [[ $VERBOSITY > 0 ]] && echo -n "Loading optimization config..."
476 source optimize/opt_config
477 [[ $? > 0 ]] && echo " optimize/opt_config did not load.." && exit
478 [[ $VERBOSITY > 0 ]] && echo "OK"
[a0f0bee]479 # Validate optimize settings, if required
480 validate_opt_settings
[1b65a84]481fi
482#
483
[877cc6a]484# If $BUILDDIR has subdirectories like tools/ or bin/, stop the run
485# and notify the user about that.
486if [ -d $BUILDDIR/tools -o -d $BUILDDIR/bin ] && [ -z $CLEAN ] ; then
487 eval "$no_empty_builddir"
488fi
489
490# If requested, clean the build directory
491clean_builddir
492
493if [[ ! -d $JHALFSDIR ]]; then
494 mkdir -p $JHALFSDIR
495fi
[a0f0bee]496#
497# Create $BUILDDIR/sources even though it could be created by get_sources()
498if [[ ! -d $BUILDDIR/sources ]]; then
499 mkdir -p $BUILDDIR/sources
500fi
501#
502# Create the log directory
503if [[ ! -d $LOGDIR ]]; then
504 mkdir $LOGDIR
505fi
506>$LOGDIR/$LOG
507#
[a229600]508[[ "$TEST" != "0" ]] && [[ ! -d $TESTLOGDIR ]] && install -d -m 1777 $TESTLOGDIR
[a0f0bee]509#
[877cc6a]510if [[ "$PWD" != "$JHALFSDIR" ]]; then
[a858a78]511 cp $COMMON_DIR/{makefile-functions,progress_bar.sh} $JHALFSDIR/
[a229600]512 #
[1b65a84]513 [[ "$OPTIMIZE" != "0" ]] && cp optimize/opt_override $JHALFSDIR/
[a229600]514 #
[401f81e]515 if [[ "$COMPARE" = "y" ]]; then
[45f82718]516 mkdir -p $JHALFSDIR/extras
517 cp extras/* $JHALFSDIR/extras
518 fi
[a0f0bee]519 #
[877cc6a]520 if [[ -n "$FILES" ]]; then
[d385453]521 # pushd/popd necessary to deal with multiple files
[877cc6a]522 pushd $PACKAGE_DIR 1> /dev/null
523 cp $FILES $JHALFSDIR/
524 popd 1> /dev/null
525 fi
[a0f0bee]526 #
[401f81e]527 if [[ "$REPORT" = "y" ]]; then
[1ec8fce]528 cp $COMMON_DIR/create-sbu_du-report.sh $JHALFSDIR/
[d385453]529 # After being sure that all looks sane, dump the settings to a file
[1ec8fce]530 # This file will be used to create the REPORT header
531 validate_config > $JHALFSDIR/jhalfs.config
[8d0fa35]532 fi
[a0f0bee]533 #
[401f81e]534 [[ "$GETPKG" = "y" ]] && cp $COMMON_DIR/urls.xsl $JHALFSDIR/
[3d1b542]535 #
[a160d86]536 cp $COMMON_DIR/packages.xsl $JHALFSDIR/
[1ec8fce]537 #
[877cc6a]538 sed 's,FAKEDIR,'$BOOK',' $PACKAGE_DIR/$XSL > $JHALFSDIR/${XSL}
539 export XSL=$JHALFSDIR/${XSL}
540fi
541
542get_book
[21f0a91]543echo "${SD_BORDER}${nl_}"
[877cc6a]544
545build_Makefile
[21f0a91]546echo "${SD_BORDER}${nl_}"
[877cc6a]547
548run_make
Note: See TracBrowser for help on using the repository browser.