Context Navigation

source: master.sh@ d3ce173

2.3 2.3.x 2.4 ablfs ablfs-more legacy new_features trunk

Last change on this file since d3ce173 was a705708, checked in by Manuel Canales Esparcia <manuel@…>, 18 years ago
Merged menuconfig code from experimental. Added clfs2 symlink (required by menuconfig)
Property mode set to `100755`
File size: 14.3 KB

Rev	Line
[877cc6a]	1	#!/bin/bash
	2	# $Id$
	3	set -e
	4
	5
	6	#>>>>>>>>>>>>>>>ERROR TRAPPING >>>>>>>>>>>>>>>>>>>>
	7	#-----------------------#
	8	simple_error() { # Basic error trap.... JUST DIE
	9	#-----------------------#
	10	# If +e then disable text output
	11	if [[ "$-" =~ "e" ]]; then
	12	echo -e "\n${RED}ERROR:${GREEN} basic error trapped!${OFF}\n" >&2
	13	fi
	14	}
	15
	16	see_ya() {
[73e5448]	17	echo -e "\n\t${BOLD}Goodbye and thank you for choosing ${L_arrow}jhalfs${R_arrow}\n"
[877cc6a]	18	}
	19	##### Simple error TRAPS
	20	# ctrl-c SIGINT
	21	# ctrl-y
	22	# ctrl-z SIGTSTP
	23	# SIGHUP 1 HANGUP
	24	# SIGINT 2 INTRERRUPT FROM KEYBOARD Ctrl-C
	25	# SIGQUIT 3
	26	# SIGKILL 9 KILL
	27	# SIGTERM 15 TERMINATION
	28	# SIGSTOP 17,18,23 STOP THE PROCESS
	29	#####
	30	set -e
	31	trap see_ya 0
	32	trap simple_error ERR
	33	trap 'echo -e "\n\n${RED}INTERRUPT${OFF} trapped\n" && exit 2' 1 2 3 15 17 18 23
	34	#>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
	35
	36
	37	if [ ! -L $0 ] ; then
	38	echo "${nl_}${tab_}${BOLD}${RED}This script cannot be called directly: EXITING ${OFF}${nl_}"
	39	exit 1
	40	fi
	41
	42	PROGNAME=$(basename $0)
	43	COMMON_DIR="common"
	44	PACKAGE_DIR=$(echo $PROGNAME \| tr [a-z] [A-Z])
	45	MODULE=$PACKAGE_DIR/master.sh
	46	MODULE_CONFIG=$PACKAGE_DIR/config
	47	VERBOSITY=0
	48
	49	[[ $VERBOSITY > 0 ]] && echo -n "Loading common-functions module..."
	50	source $COMMON_DIR/common-functions
	51	[[ $? > 0 ]] && echo " $COMMON_DIR/common-functions did not load.." && exit
	52	[[ $VERBOSITY > 0 ]] && echo "OK"
	53	#
	54	[[ $VERBOSITY > 0 ]] && echo -n "Loading masterscript conf..."
	55	source $COMMON_DIR/config
	56	[[ $? > 0 ]] && echo "$COMMON_DIR/conf did not load.." && exit
	57	[[ $VERBOSITY > 0 ]] && echo "OK"
	58	#
	59	[[ $VERBOSITY > 0 ]] && echo -n "Loading config module <$MODULE_CONFIG>..."
	60	source $MODULE_CONFIG
	61	[[ $? > 0 ]] && echo "$MODULE_CONFIG did not load.." && exit 1
	62	[[ $VERBOSITY > 0 ]] && echo "OK"
	63	#
	64	[[ $VERBOSITY > 0 ]] && echo -n "Loading code module <$MODULE>..."
	65	source $MODULE
	66	[[ $? > 0 ]] && echo "$MODULE did not load.." && exit 2
	67	[[ $VERBOSITY > 0 ]] && echo "OK"
	68	#
[21f0a91]	69	[[ $VERBOSITY > 0 ]] && echo "${SD_BORDER}${nl_}"
[877cc6a]	70
[a705708]	71	if [[ -e using_menuconfig ]]; then
	72	[[ $VERBOSITY > 0 ]] && echo -n "Loading config params from <configuration>..."
	73	source configuration
	74	[[ $? > 0 ]] && echo "file:configuration did not load.." && exit 1
	75	[[ $VERBOSITY > 0 ]] && echo "OK"
	76
	77	#--- Working directories
	78	SCRIPT_ROOT=jhalfs
	79	JHALFSDIR=$BUILDDIR/$SCRIPT_ROOT
	80	LOGDIR=$JHALFSDIR/logs
	81	TESTLOGDIR=$JHALFSDIR/test-logs
	82	MKFILE=$JHALFSDIR/Makefile
	83	#--- ICA report log directory
	84	ICALOGDIR=$LOGDIR/ICA
	85	#--- farce report log directory
	86	FARCELOGDIR=$LOGDIR/farce
	87
	88	if [[ ! -z ${BRANCH_ID} ]]; then
	89	case $BRANCH_ID in
	90	dev* \| SVN \| trunk )
	91	case $PROGNAME in
	92	clfs2 ) TREE=branches/clfs-2.0/BOOK ;;
	93	*) TREE=trunk/BOOK ;;
	94	esac
	95	LFSVRS=development
	96	;;
	97	branch-* )
	98	LFSVRS=${BRANCH_ID}
	99	TREE=branches/${BRANCH_ID#branch-}/BOOK
	100	;;
	101	* )
	102	case $PROGNAME in
	103	lfs \| hlfs )
	104	LFSVRS=${BRANCH_ID}
	105	TREE=tags/${BRANCH_ID}/BOOK
	106	;;
	107	clfs \| clfs2 )
	108	LFSVRS=${BRANCH_ID}
	109	TREE=tags/${BRANCH_ID}
	110	;;
	111	esac
	112	;;
	113	esac
	114	fi
	115	fi
[877cc6a]	116
	117	#===========================================================
	118	# If the var BOOK contains something then, maybe, it points
	119	# to a working doc.. set WC=1, else 'null'
	120	#===========================================================
	121	WC=${BOOK:+1}
	122	#===========================================================
	123
	124
	125	#*******************************************************************#
	126	[[ $VERBOSITY > 0 ]] && echo -n "Loading function <func_check_version.sh>..."
	127	source $COMMON_DIR/func_check_version.sh
	128	[[ $? > 0 ]] && echo " function module did not load.." && exit 2
	129	[[ $VERBOSITY > 0 ]] && echo "OK"
	130
	131	[[ $VERBOSITY > 0 ]] && echo -n "Loading function <func_validate_configs.sh>..."
	132	source $COMMON_DIR/func_validate_configs.sh
	133	[[ $? > 0 ]] && echo " function module did not load.." && exit 2
	134	[[ $VERBOSITY > 0 ]] && echo "OK"
[21f0a91]	135	[[ $VERBOSITY > 0 ]] && echo "${SD_BORDER}${nl_}"
[877cc6a]	136
	137
	138	###################################
[45f82718]	139	### MAIN ###
[877cc6a]	140	###################################
	141
	142	# Evaluate any command line switches
	143
	144	while test $# -gt 0 ; do
	145	case $1 in
[1ec8fce]	146	# Common options for {C,H}LFS books
[877cc6a]	147	--book \| -B )
	148	test $# = 1 && eval "$exit_missing_arg"
	149	shift
	150	case $1 in
	151	dev* \| SVN \| trunk )
	152	LFSVRS=development
[a6655ff]	153	TREE=trunk/BOOK
[877cc6a]	154	;;
[a6655ff]	155	branch-* )
	156	LFSVRS=$1
	157	TREE=branches/${1#branch-}/BOOK
	158	;;
	159	* )
	160	case $PROGNAME in
	161	lfs \| hlfs )
	162	LFSVRS=$1
	163	TREE=tags/$1/BOOK
	164	;;
	165	clfs )
	166	LFSVRS=$1
	167	TREE=tags/$1
	168	;;
	169	esac
[877cc6a]	170	;;
	171	esac
	172	;;
	173
	174	--directory \| -D )
	175	test $# = 1 && eval "$exit_missing_arg"
	176	shift
	177	case $1 in
	178	-* )
	179	echo -e "\n$1 isn't a valid build directory."
	180	echo -e "Directory names can't start with - .\n"
	181	exit 1
	182	;;
	183	* )
	184	BUILDDIR=$1
[1a1f099]	185	JHALFSDIR=$BUILDDIR/${SCRIPT_ROOT}
[877cc6a]	186	LOGDIR=$JHALFSDIR/logs
[a229600]	187	TESTLOGDIR=$JHALFSDIR/test-logs
[877cc6a]	188	MKFILE=$JHALFSDIR/Makefile
	189	;;
	190	esac
	191	;;
	192
[15cad16]	193	--get-packages \| -G ) GETPKG=1 ;;
[877cc6a]	194
	195	--help \| -h ) usage \| more && exit ;;
	196
[1b65a84]	197	--optimize \| -O )
	198	test $# = 1 && eval "$exit_missing_arg"
	199	shift
	200	case $1 in
	201	0 \| 1 \| 2 )
	202	OPTIMIZE=$1
	203	;;
	204	* )
	205	echo -e "\n$1 isn't a valid optimize level value."
	206	echo -e "You must use 0, 1, or 2.\n"
	207	exit 1
	208	;;
	209	esac
	210	;;
	211
[877cc6a]	212	--testsuites \| -T )
	213	test $# = 1 && eval "$exit_missing_arg"
	214	shift
	215	case $1 in
	216	0 \| 1 \| 2 \| 3 )
	217	TEST=$1
	218	;;
	219	* )
	220	echo -e "\n$1 isn't a valid testsuites level value."
	221	echo -e "You must to use 0, 1, 2, or 3.\n"
	222	exit 1
	223	;;
	224	esac
	225	;;
	226
	227	--version \| -V )
	228	echo "$version"
	229	exit 0
	230	;;
	231
	232	--working-copy \| -W )
	233	test $# = 1 && eval "$exit_missing_arg"
	234	shift
	235	case $PROGNAME in # Poor checks. We should find better ones.
	236	lfs)
[4bc3c2b]	237	if [ -d $1/chapter09 ] ; then
[877cc6a]	238	WC=1
	239	BOOK=$1
	240	else
[d385453]	241	echo -e "\nLooks like $1 isn't an LFS working copy."
[877cc6a]	242	exit 1
	243	fi
	244	;;
	245	clfs)
[4bc3c2b]	246	if [ -d $1/cross-tools ] ; then
[877cc6a]	247	WC=1
	248	BOOK=$1
	249	else
	250	echo -e "\nLooks like $1 isn't a CLFS working copy."
	251	exit 1
	252	fi
	253	;;
	254	hlfs)
	255	if [ -f $1/template.xml ] ; then
	256	WC=1
	257	BOOK=$1
	258	else
[d385453]	259	echo -e "\nLooks like $1 isn't an HLFS working copy."
[877cc6a]	260	exit 1
	261	fi
	262	;;
	263	esac
	264	;;
	265
[d385453]	266	--comparison \| -C )
[45f82718]	267	test $# = 1 && eval "$exit_missing_arg"
	268	shift
	269	case $1 in
	270	ICA) RUN_ICA=1
	271	RUN_FARCE=0
	272	COMPARE=1
	273	;;
	274	farce) RUN_ICA=0
	275	RUN_FARCE=1
	276	COMPARE=1
	277	;;
	278	both) RUN_ICA=1
	279	RUN_FARCE=1
	280	COMPARE=1
	281	;;
	282	*)
[0ad851d]	283	echo -e "\n$1 is an unknown analysis method."
[45f82718]	284	exit 1
	285	;;
	286	esac
	287	;;
	288
[877cc6a]	289	--fstab \| -F )
	290	test $# = 1 && eval "$exit_missing_arg"
	291	shift
	292	if [ -f $1 ] ; then
	293	FSTAB=$1
	294	else
	295	echo -e "\nFile $1 not found. Verify your command line.\n"
	296	exit 1
	297	fi
	298	;;
	299
	300	--kernel-config \| -K )
	301	test $# = 1 && eval "$exit_missing_arg"
	302	shift
	303	if [ -f $1 ] ; then
	304	CONFIG=$1
	305	else
	306	echo -e "\nFile $1 not found. Verify your command line.\n"
	307	exit 1
	308	fi
	309	;;
	310
[ef969ee]	311	--run-make \| -M ) RUNMAKE=1 ;;
[877cc6a]	312
	313	--rebuild \| -R ) CLEAN=1 ;;
	314
	315	# CLFS options
	316	--arch \| -A )
	317	test $# = 1 && eval "$exit_missing_arg"
	318	shift
	319	case $1 in
[7432834]	320	arm )
	321	ARCH=arm
	322	TARGET="arm-unknown-linux-gnu"
	323	;;
[877cc6a]	324	x86 )
	325	ARCH=x86
	326	TARGET="i686-pc-linux-gnu"
	327	;;
	328	i486 )
	329	ARCH=x86
	330	TARGET="i486-pc-linux-gnu"
	331	;;
	332	i586 )
	333	ARCH=x86
	334	TARGET="i586-pc-linux-gnu"
	335	;;
	336	ppc )
	337	ARCH=ppc
	338	TARGET="powerpc-unknown-linux-gnu"
	339	;;
	340	mips )
	341	ARCH=mips
	342	TARGET="mips-unknown-linux-gnu"
	343	;;
	344	mipsel )
	345	ARCH=mips
	346	TARGET="mipsel-unknown-linux-gnu"
	347	;;
	348	sparc )
	349	ARCH=sparc
	350	TARGET="sparcv9-unknown-linux-gnu"
	351	;;
	352	x86_64-64 )
	353	ARCH=x86_64-64
	354	TARGET="x86_64-unknown-linux-gnu"
	355	;;
	356	mips64-64 )
	357	ARCH=mips64-64
	358	TARGET="mips-unknown-linux-gnu"
	359	;;
	360	mipsel64-64 )
	361	ARCH=mips64-64
	362	TARGET="mipsel-unknown-linux-gnu"
	363	;;
	364	sparc64-64 )
	365	ARCH=sparc64-64
	366	TARGET="sparc64-unknown-linux-gnu"
	367	;;
	368	alpha )
	369	ARCH=alpha
	370	TARGET="alpha-unknown-linux-gnu"
	371	;;
	372	x86_64 )
	373	ARCH=x86_64
	374	TARGET="x86_64-unknown-linux-gnu"
	375	TARGET32="i686-pc-linux-gnu"
	376	;;
	377	mips64 )
	378	ARCH=mips64
	379	TARGET="mips-unknown-linux-gnu"
	380	TARGET32="mips-unknown-linux-gnu"
	381	;;
	382	mipsel64 )
	383	ARCH=mips64
	384	TARGET="mipsel-unknown-linux-gnu"
	385	TARGET32="mipsel-unknown-linux-gnu"
	386	;;
	387	sparc64 )
	388	ARCH=sparc64
	389	TARGET="sparc64-unknown-linux-gnu"
	390	TARGET32="sparcv9-unknown-linux-gnu"
	391	;;
	392	ppc64 )
	393	ARCH=ppc64
	394	TARGET="powerpc64-unknown-linux-gnu"
	395	TARGET32="powerpc-unknown-linux-gnu"
	396	;;
	397	* )
[d385453]	398	echo -e "\n$1 is an unknown or unsupported arch."
[877cc6a]	399	exit 1
	400	;;
	401	esac
	402	;;
	403
	404	--boot-config )
	405	test $# = 1 && eval "$exit_missing_arg"
	406	shift
	407	if [ -f $1 ] ; then
	408	BOOT_CONFIG=$1
	409	else
	410	echo -e "\nFile $1 not found. Verify your command line.\n"
	411	exit 1
	412	fi
	413	;;
	414
	415	--method )
	416	test $# = 1 && eval "$exit_missing_arg"
	417	shift
	418	case $1 in
	419	chroot \| boot )
	420	METHOD=$1
	421	;;
	422	* )
	423	echo -e "\n$1 isn't a valid build method."
	424	exit 1
	425	;;
	426	esac
	427	;;
	428
	429	# HLFS options
	430	--model )
	431	test $# = 1 && eval "$exit_missing_arg"
	432	shift
	433	case $1 in
	434	glibc \| uclibc )
	435	MODEL=$1
	436	;;
	437	* )
	438	echo -e "\n$1 isn't a valid libc model."
	439	exit 1
	440	;;
	441	esac
	442	;;
	443
	444	# Unknown options
	445	* ) usage ;;
	446	esac
	447	shift
	448	done
	449
	450	#===================================================
	451	# Set the document location...
	452	# BOOK is either defined in
	453	# xxx.config
	454	# comand line
	455	# default
	456	# If set by conf file or cmd line leave it
	457	# alone otherwise load the default version
	458	#===================================================
	459	BOOK=${BOOK:=$PROGNAME-$LFSVRS}
	460	#===================================================
	461
	462
[d385453]	463	# Check for minimum gcc and kernel versions
[877cc6a]	464	#check_requirements 1 # 0/1 0-do not display values.
	465	echo
	466	check_version "2.6.2" "`uname -r`" "KERNEL"
	467	check_version "3.0" "$BASH_VERSION" "BASH"
	468	check_version "3.0" "`gcc -dumpversion`" "GCC"
[27f165a]	469	tarVer=`tar --version \| head -n1 \| cut -d " " -f4`
	470	check_version "1.15.0" "${tarVer}" "TAR"
[21f0a91]	471	echo "${SD_BORDER}${nl_}"
[877cc6a]	472
	473	validate_config
[21f0a91]	474	echo "${SD_BORDER}${nl_}"
[877cc6a]	475	echo -n "Are you happy with these settings? yes/no (no): "
	476	read ANSWER
	477	if [ x$ANSWER != "xyes" ] ; then
	478	echo "${nl_}Fix the configuration options and rerun the script.${nl_}"
	479	exit 1
	480	fi
[21f0a91]	481	echo "${nl_}${SD_BORDER}${nl_}"
[877cc6a]	482
[a0f0bee]	483	# Load additional modules or configuration files based on global settings
[1ee8ad5]	484	# compare module
	485	if [[ "$COMPARE" = "1" ]]; then
	486	[[ $VERBOSITY > 0 ]] && echo -n "Loading compare module..."
	487	source $COMMON_DIR/func_compare.sh
	488	[[ $? > 0 ]] && echo "$COMMON_DIR/func_compare.sh did not load.." && exit
	489	[[ $VERBOSITY > 0 ]] && echo "OK"
	490	fi
[1b65a84]	491	#
	492	# optimize module
	493	if [[ "$OPTIMIZE" != "0" ]]; then
	494	[[ $VERBOSITY > 0 ]] && echo -n "Loading optimization module..."
	495	source optimize/optimize_functions
	496	[[ $? > 0 ]] && echo " optimize/optimize_functions did not load.." && exit
	497	[[ $VERBOSITY > 0 ]] && echo "OK"
[a0f0bee]	498	#
	499	# optimize configurations
[1b65a84]	500	[[ $VERBOSITY > 0 ]] && echo -n "Loading optimization config..."
	501	source optimize/opt_config
	502	[[ $? > 0 ]] && echo " optimize/opt_config did not load.." && exit
	503	[[ $VERBOSITY > 0 ]] && echo "OK"
[a0f0bee]	504	# Validate optimize settings, if required
	505	validate_opt_settings
[1b65a84]	506	fi
	507	#
	508
[877cc6a]	509	# If $BUILDDIR has subdirectories like tools/ or bin/, stop the run
	510	# and notify the user about that.
	511	if [ -d $BUILDDIR/tools -o -d $BUILDDIR/bin ] && [ -z $CLEAN ] ; then
	512	eval "$no_empty_builddir"
	513	fi
	514
	515	# If requested, clean the build directory
	516	clean_builddir
	517
	518	if [[ ! -d $JHALFSDIR ]]; then
	519	mkdir -p $JHALFSDIR
	520	fi
[a0f0bee]	521	#
	522	# Create $BUILDDIR/sources even though it could be created by get_sources()
	523	if [[ ! -d $BUILDDIR/sources ]]; then
	524	mkdir -p $BUILDDIR/sources
	525	fi
	526	#
	527	# Create the log directory
	528	if [[ ! -d $LOGDIR ]]; then
	529	mkdir $LOGDIR
	530	fi
	531	>$LOGDIR/$LOG
	532	#
[a229600]	533	[[ "$TEST" != "0" ]] && [[ ! -d $TESTLOGDIR ]] && install -d -m 1777 $TESTLOGDIR
[a0f0bee]	534	#
[877cc6a]	535	if [[ "$PWD" != "$JHALFSDIR" ]]; then
[a858a78]	536	cp $COMMON_DIR/{makefile-functions,progress_bar.sh} $JHALFSDIR/
[a229600]	537	#
[1b65a84]	538	[[ "$OPTIMIZE" != "0" ]] && cp optimize/opt_override $JHALFSDIR/
[a229600]	539	#
[45f82718]	540	if [[ "$COMPARE" != "0" ]] ; then
	541	mkdir -p $JHALFSDIR/extras
	542	cp extras/* $JHALFSDIR/extras
	543	fi
[a0f0bee]	544	#
[877cc6a]	545	if [[ -n "$FILES" ]]; then
[d385453]	546	# pushd/popd necessary to deal with multiple files
[877cc6a]	547	pushd $PACKAGE_DIR 1> /dev/null
	548	cp $FILES $JHALFSDIR/
	549	popd 1> /dev/null
	550	fi
[a0f0bee]	551	#
[1ec8fce]	552	if [[ "$REPORT" = "1" ]]; then
	553	cp $COMMON_DIR/create-sbu_du-report.sh $JHALFSDIR/
[d385453]	554	# After being sure that all looks sane, dump the settings to a file
[1ec8fce]	555	# This file will be used to create the REPORT header
	556	validate_config > $JHALFSDIR/jhalfs.config
[8d0fa35]	557	fi
[a0f0bee]	558	#
[1ec8fce]	559	[[ "$GETPKG" = "1" ]] && cp $COMMON_DIR/urls.xsl $JHALFSDIR/
[3d1b542]	560	#
[a160d86]	561	cp $COMMON_DIR/packages.xsl $JHALFSDIR/
[1ec8fce]	562	#
[877cc6a]	563	sed 's,FAKEDIR,'$BOOK',' $PACKAGE_DIR/$XSL > $JHALFSDIR/${XSL}
	564	export XSL=$JHALFSDIR/${XSL}
	565	fi
	566
	567	get_book
[21f0a91]	568	echo "${SD_BORDER}${nl_}"
[877cc6a]	569
	570	build_Makefile
[21f0a91]	571	echo "${SD_BORDER}${nl_}"
[877cc6a]	572
	573	run_make

Note: See TracBrowser for help on using the repository browser.

Download in other formats: