source: master.sh@ 31ad03a

experimental
Last change on this file since 31ad03a was 5ff30ff, checked in by Manuel Canales Esparcia <manuel@…>, 19 years ago

Moved a switch to their alphabetical place.

  • Property mode set to 100755
File size: 11.5 KB
Line 
1#!/bin/bash
2# $Id$
3set -e
4
5
6#>>>>>>>>>>>>>>>ERROR TRAPPING >>>>>>>>>>>>>>>>>>>>
7#-----------------------#
8simple_error() { # Basic error trap.... JUST DIE
9#-----------------------#
10 # If +e then disable text output
11 if [[ "$-" =~ "e" ]]; then
12 echo -e "\n${RED}ERROR:${GREEN} basic error trapped!${OFF}\n" >&2
13 fi
14}
15
16see_ya() {
17 echo -e "\n\t${BOLD}Goodbye and thank you for choosing ${L_arrow}JHALFS-X${R_arrow}\n"
18}
19##### Simple error TRAPS
20# ctrl-c SIGINT
21# ctrl-y
22# ctrl-z SIGTSTP
23# SIGHUP 1 HANGUP
24# SIGINT 2 INTRERRUPT FROM KEYBOARD Ctrl-C
25# SIGQUIT 3
26# SIGKILL 9 KILL
27# SIGTERM 15 TERMINATION
28# SIGSTOP 17,18,23 STOP THE PROCESS
29#####
30set -e
31trap see_ya 0
32trap simple_error ERR
33trap 'echo -e "\n\n${RED}INTERRUPT${OFF} trapped\n" && exit 2' 1 2 3 15 17 18 23
34#>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
35
36
37if [ ! -L $0 ] ; then
38 echo "${nl_}${tab_}${BOLD}${RED}This script cannot be called directly: EXITING ${OFF}${nl_}"
39 exit 1
40fi
41
42 PROGNAME=$(basename $0)
43 COMMON_DIR="common"
44 PACKAGE_DIR=$(echo $PROGNAME | tr [a-z] [A-Z])
45 MODULE=$PACKAGE_DIR/master.sh
46MODULE_CONFIG=$PACKAGE_DIR/config
47
48echo -n "Loading common-functions module..."
49source $COMMON_DIR/common-functions
50[[ $? > 0 ]] && echo " $COMMON_DIR/common-functions did not load.." && exit
51echo "OK"
52#
53
54echo -n "Loading masterscript conf..."
55source $COMMON_DIR/config
56[[ $? > 0 ]] && echo "$COMMON_DIR/conf did not load.." && exit
57echo "OK"
58#
59echo -n "Loading config module <$MODULE_CONFIG>..."
60source $MODULE_CONFIG
61[[ $? > 0 ]] && echo "$MODULE_CONFIG did not load.." && exit 1
62echo "OK"
63#
64echo -n "Loading code module <$MODULE>..."
65source $MODULE
66[[ $? > 0 ]] && echo "$MODULE did not load.." && exit 2
67echo "OK"
68#
69echo "---------------${nl_}"
70
71
72#===========================================================
73# If the var BOOK contains something then, maybe, it points
74# to a working doc.. set WC=1, else 'null'
75#===========================================================
76WC=${BOOK:+1}
77#===========================================================
78
79
80#*******************************************************************#
81echo -n "Loading function <func_check_version.sh>..."
82source $COMMON_DIR/func_check_version.sh
83[[ $? > 0 ]] && echo " function module did not load.." && exit 2
84echo "OK"
85
86echo -n "Loading function <func_validate_configs.sh>..."
87source $COMMON_DIR/func_validate_configs.sh
88[[ $? > 0 ]] && echo " function module did not load.." && exit 2
89echo "OK"
90echo "---------------${nl_}"
91
92
93###################################
94### MAIN ###
95###################################
96
97# Evaluate any command line switches
98
99while test $# -gt 0 ; do
100 case $1 in
101 # Common options for all books
102 --book | -B )
103 test $# = 1 && eval "$exit_missing_arg"
104 shift
105 case $1 in
106 dev* | SVN | trunk )
107 LFSVRS=development
108 ;;
109 *) if [[ "$PROGNAME" = "lfs" ]]; then
110 case $1 in
111 6.1.1 )
112 echo "For stable 6.1.1 book, please use jhalfs-0.2."
113 exit 0
114 ;;
115 alpha*) LFSVRS=alphabetical ;;
116 udev*) LFSVRS=udev_update ;;
117 * ) echo "$1 is an unsupported version at this time." ;;
118 esac
119 else
120 echo "The requested version, ${L_arrow} ${BOLD}$1${OFF} ${R_arrow}, is undefined in the ${BOLD}$(echo $PROGNAME | tr [a-z] [A-Z])${OFF} series."
121 exit 0
122 fi
123 ;;
124 esac
125 ;;
126
127 --directory | -D )
128 test $# = 1 && eval "$exit_missing_arg"
129 shift
130 case $1 in
131 -* )
132 echo -e "\n$1 isn't a valid build directory."
133 echo -e "Directory names can't start with - .\n"
134 exit 1
135 ;;
136 * )
137 BUILDDIR=$1
138 JHALFSDIR=$BUILDDIR/jhalfs
139 LOGDIR=$JHALFSDIR/logs
140 MKFILE=$JHALFSDIR/Makefile
141 ;;
142 esac
143 ;;
144
145 --get-packages | -G ) HPKG=1 ;;
146
147 --help | -h )
148 if [[ "$PROGNAME" = "blfs" ]]; then
149 blfs_usage
150 else
151 usage
152 fi
153 ;;
154
155 --testsuites | -T )
156 test $# = 1 && eval "$exit_missing_arg"
157 shift
158 case $1 in
159 0 | 1 | 2 | 3 )
160 TEST=$1
161 ;;
162 * )
163 echo -e "\n$1 isn't a valid testsuites level value."
164 echo -e "You must to use 0, 1, 2, or 3.\n"
165 exit 1
166 ;;
167 esac
168 ;;
169
170 --version | -V )
171 clear
172 echo "$version"
173 exit 0
174 ;;
175
176 --working-copy | -W )
177 test $# = 1 && eval "$exit_missing_arg"
178 shift
179 case $PROGNAME in # Poor checks. We should find better ones.
180 lfs)
181 if [ -f $1/patches.ent ] ; then
182 WC=1
183 BOOK=$1
184 else
185 echo -e "\nLook like $1 isn't a LFS working copy."
186 exit 1
187 fi
188 ;;
189 clfs)
190 if [ -f $1/patches.ent ] && [ -f $1/packages.ent ]; then
191 WC=1
192 BOOK=$1
193 else
194 echo -e "\nLook like $1 isn't a CLFS working copy."
195 exit 1
196 fi
197 ;;
198 hlfs)
199 if [ -f $1/template.xml ] ; then
200 WC=1
201 BOOK=$1
202 else
203 echo -e "\nLook like $1 isn't a HLFS working copy."
204 exit 1
205 fi
206 ;;
207 blfs)
208 if [ -f $1/use-unzip.xml ] ; then
209 WC=1
210 BOOK=$1
211 else
212 echo -e "\nLook like $1 isn't a BLFS working copy."
213 exit 1
214 fi
215 ;;
216 esac
217 ;;
218
219 # Common options for LFS, CLFS and HLFS
220 --fstab | -F )
221 test $# = 1 && eval "$exit_missing_arg"
222 shift
223 if [ -f $1 ] ; then
224 FSTAB=$1
225 else
226 echo -e "\nFile $1 not found. Verify your command line.\n"
227 exit 1
228 fi
229 ;;
230
231 --kernel-config | -K )
232 test $# = 1 && eval "$exit_missing_arg"
233 shift
234 if [ -f $1 ] ; then
235 CONFIG=$1
236 else
237 echo -e "\nFile $1 not found. Verify your command line.\n"
238 exit 1
239 fi
240 ;;
241
242 --make | -M ) RUNMAKE=1 ;;
243
244 --rebuild | -R ) CLEAN=1 ;;
245
246 # CLFS options
247 --arch | -A )
248 test $# = 1 && eval "$exit_missing_arg"
249 shift
250 case $1 in
251 x86 )
252 ARCH=x86
253 TARGET="i686-pc-linux-gnu"
254 ;;
255 i486 )
256 ARCH=x86
257 TARGET="i486-pc-linux-gnu"
258 ;;
259 i586 )
260 ARCH=x86
261 TARGET="i586-pc-linux-gnu"
262 ;;
263 ppc )
264 ARCH=ppc
265 TARGET="powerpc-unknown-linux-gnu"
266 ;;
267 mips )
268 ARCH=mips
269 TARGET="mips-unknown-linux-gnu"
270 ;;
271 mipsel )
272 ARCH=mips
273 TARGET="mipsel-unknown-linux-gnu"
274 ;;
275 sparc )
276 ARCH=sparc
277 TARGET="sparcv9-unknown-linux-gnu"
278 ;;
279 sparcv8 )
280 ARCH=sparcv8
281 TARGET="sparc-unknown-linux-gnu"
282 ;;
283 x86_64-64 )
284 ARCH=x86_64-64
285 TARGET="x86_64-unknown-linux-gnu"
286 ;;
287 mips64-64 )
288 ARCH=mips64-64
289 TARGET="mips-unknown-linux-gnu"
290 ;;
291 mipsel64-64 )
292 ARCH=mips64-64
293 TARGET="mipsel-unknown-linux-gnu"
294 ;;
295 sparc64-64 )
296 ARCH=sparc64-64
297 TARGET="sparc64-unknown-linux-gnu"
298 ;;
299 alpha )
300 ARCH=alpha
301 TARGET="alpha-unknown-linux-gnu"
302 ;;
303 x86_64 )
304 ARCH=x86_64
305 TARGET="x86_64-unknown-linux-gnu"
306 TARGET32="i686-pc-linux-gnu"
307 ;;
308 mips64 )
309 ARCH=mips64
310 TARGET="mips-unknown-linux-gnu"
311 TARGET32="mips-unknown-linux-gnu"
312 ;;
313 mipsel64 )
314 ARCH=mips64
315 TARGET="mipsel-unknown-linux-gnu"
316 TARGET32="mipsel-unknown-linux-gnu"
317 ;;
318 sparc64 )
319 ARCH=sparc64
320 TARGET="sparc64-unknown-linux-gnu"
321 TARGET32="sparcv9-unknown-linux-gnu"
322 ;;
323 ppc64 )
324 ARCH=ppc64
325 TARGET="powerpc64-unknown-linux-gnu"
326 TARGET32="powerpc-unknown-linux-gnu"
327 ;;
328 * )
329 echo -e "\n$1 is an unknown or unsopported arch."
330 exit 1
331 ;;
332 esac
333 ;;
334
335 --boot-config )
336 test $# = 1 && eval "$exit_missing_arg"
337 shift
338 if [ -f $1 ] ; then
339 BOOT_CONFIG=$1
340 else
341 echo -e "\nFile $1 not found. Verify your command line.\n"
342 exit 1
343 fi
344 ;;
345
346 --method )
347 test $# = 1 && eval "$exit_missing_arg"
348 shift
349 case $1 in
350 chroot | boot )
351 METHOD=$1
352 ;;
353 * )
354 echo -e "\n$1 isn't a valid build method."
355 exit 1
356 ;;
357 esac
358 ;;
359
360 # HLFS options
361 --model )
362 test $# = 1 && eval "$exit_missing_arg"
363 shift
364 case $1 in
365 glibc | uclibc )
366 MODEL=$1
367 ;;
368 * )
369 echo -e "\n$1 isn't a valid libc model."
370 exit 1
371 ;;
372 esac
373 ;;
374
375 # BLFS options
376 --dependencies )
377 test $# = 1 && eval "$exit_missing_arg"
378 shift
379 case $1 in
380 0 | 1 | 2 )
381 DEPEND=$1
382 ;;
383 * )
384 echo -e "\n$1 isn't a valid dependencies level."
385 exit 1
386 ;;
387 esac
388 ;;
389
390 # Unknown options
391 * )
392 if [[ "$PROGNAME" = "blfs" ]]; then
393 blfs_usage
394 else
395 usage
396 fi
397 ;;
398 esac
399 shift
400done
401
402# Find the download client to use, if not already specified.
403
404if [ -z $DL ] ; then
405 if [ `type -p wget` ] ; then
406 DL=wget
407 elif [ `type -p curl` ] ; then
408 DL=curl
409 else
410 eval "$no_dl_client"
411 fi
412fi
413
414#===================================================
415# Set the document location...
416# BOOK is either defined in
417# xxx.config
418# comand line
419# default
420# If set by conf file or cmd line leave it
421# alone otherwise load the default version
422#===================================================
423BOOK=${BOOK:=$PROGNAME-$LFSVRS}
424#===================================================
425
426
427# Check for minumum gcc and kernel versions
428#check_requirements 1 # 0/1 0-do not display values.
429check_version "2.6.2" "`uname -r`" "KERNEL"
430check_version "3.0" "$BASH_VERSION" "BASH"
431check_version "3.0" "`gcc -dumpversion`" "GCC"
432tarVer=`tar --version`
433check_version "1.15.0" "${tarVer##* }" "TAR"
434echo "---------------${nl_}"
435
436validate_config 1 # 0/1 0-do not display values
437echo "---------------${nl_}"
438
439echo -n "Are you happy with that settings? yes/no (no): "
440read ANSWER
441if [ x$ANSWER != "xyes" ] ; then
442 echo "${nl_}Fix the configuration options and rerun the script.${nl_}"
443 exit 1
444fi
445
446# Prevents setting "-d /" by mistake.
447
448if [ $BUILDDIR = / ] ; then
449 echo -ne "\nThe root directory can't be used to build LFS.\n\n"
450 exit 1
451fi
452
453# If $BUILDDIR has subdirectories like tools/ or bin/, stop the run
454# and notify the user about that.
455
456if [ -d $BUILDDIR/tools -o -d $BUILDDIR/bin ] && [ -z $CLEAN ] ; then
457 eval "$no_empty_builddir"
458fi
459
460# If requested, clean the build directory
461clean_builddir
462
463if [[ ! -d $JHALFSDIR ]]; then
464 mkdir -pv $JHALFSDIR
465fi
466
467if [[ "$PWD" != "$JHALFSDIR" ]]; then
468 cp -v $COMMON_DIR/makefile-functions $JHALFSDIR/
469 if [[ -n "$FILES" ]]; then
470 # pushd/popd necessary to deal with mulitiple files
471 pushd $PACKAGE_DIR
472 cp -v $FILES $JHALFSDIR/
473 popd
474 fi
475 sed 's,FAKEDIR,'$BOOK',' $PACKAGE_DIR/$XSL > $JHALFSDIR/${XSL}
476 export XSL=$JHALFSDIR/${XSL}
477fi
478
479if [[ ! -d $LOGDIR ]]; then
480 mkdir -v $LOGDIR
481fi
482>$LOGDIR/$LOG
483echo "---------------${nl_}"
484
485get_book
486echo "---------------${nl_}"
487
488build_Makefile
489echo "---------------${nl_}"
490
491run_make
492
Note: See TracBrowser for help on using the repository browser.