Context Navigation

source: master.sh@ da49058

experimental

Last change on this file since da49058 was 613d46b, checked in by George Boudreau <georgeb@…>, 18 years ago
Added new configuration tool.. <make> menuconfig. Needs work, especially inline help text
Property mode set to `100755`
File size: 14.1 KB

Line
1	#!/bin/bash
2	# $Id$
3	set -e
4
5
6	#>>>>>>>>>>>>>>>ERROR TRAPPING >>>>>>>>>>>>>>>>>>>>
7	#-----------------------#
8	simple_error() { # Basic error trap.... JUST DIE
9	#-----------------------#
10	# If +e then disable text output
11	if [[ "$-" =~ "e" ]]; then
12	echo -e "\n${RED}ERROR:${GREEN} basic error trapped!${OFF}\n" >&2
13	fi
14	}
15
16	see_ya() {
17	echo -e "\n\t${BOLD}Goodbye and thank you for choosing ${L_arrow}jhalfs-X${R_arrow}\n"
18	}
19	##### Simple error TRAPS
20	# ctrl-c SIGINT
21	# ctrl-y
22	# ctrl-z SIGTSTP
23	# SIGHUP 1 HANGUP
24	# SIGINT 2 INTRERRUPT FROM KEYBOARD Ctrl-C
25	# SIGQUIT 3
26	# SIGKILL 9 KILL
27	# SIGTERM 15 TERMINATION
28	# SIGSTOP 17,18,23 STOP THE PROCESS
29	#####
30	set -e
31	trap see_ya 0
32	trap simple_error ERR
33	trap 'echo -e "\n\n${RED}INTERRUPT${OFF} trapped\n" && exit 2' 1 2 3 15 17 18 23
34	#>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
35
36
37	if [ ! -L $0 ] ; then
38	echo "${nl_}${tab_}${BOLD}${RED}This script cannot be called directly: EXITING ${OFF}${nl_}"
39	exit 1
40	fi
41
42	PROGNAME=$(basename $0)
43	COMMON_DIR="common"
44	PACKAGE_DIR=$(echo $PROGNAME \| tr [a-z] [A-Z])
45	MODULE=$PACKAGE_DIR/master.sh
46	MODULE_CONFIG=$PACKAGE_DIR/config
47	VERBOSITY=0
48
49	[[ $VERBOSITY > 0 ]] && echo -n "Loading common-functions module..."
50	source $COMMON_DIR/common-functions
51	[[ $? > 0 ]] && echo " $COMMON_DIR/common-functions did not load.." && exit
52	[[ $VERBOSITY > 0 ]] && echo "OK"
53	#
54	[[ $VERBOSITY > 0 ]] && echo -n "Loading masterscript conf..."
55	source $COMMON_DIR/config
56	[[ $? > 0 ]] && echo "$COMMON_DIR/conf did not load.." && exit
57	[[ $VERBOSITY > 0 ]] && echo "OK"
58	#
59	[[ $VERBOSITY > 0 ]] && echo -n "Loading config module <$MODULE_CONFIG>..."
60	source $MODULE_CONFIG
61	[[ $? > 0 ]] && echo "$MODULE_CONFIG did not load.." && exit 1
62	[[ $VERBOSITY > 0 ]] && echo "OK"
63	#
64	[[ $VERBOSITY > 0 ]] && echo -n "Loading code module <$MODULE>..."
65	source $MODULE
66	[[ $? > 0 ]] && echo "$MODULE did not load.." && exit 2
67	[[ $VERBOSITY > 0 ]] && echo "OK"
68	#
69	[[ $VERBOSITY > 0 ]] && echo "${SD_BORDER}${nl_}"
70
71	if [[ -e using_menuconfig ]]; then
72	source configuration
73	#--- Working directories
74	SCRIPT_ROOT=jhalfs
75	JHALFSDIR=$BUILDDIR/$SCRIPT_ROOT
76	LOGDIR=$JHALFSDIR/logs
77	TESTLOGDIR=$JHALFSDIR/test-logs
78	MKFILE=$JHALFSDIR/Makefile
79	#--- ICA report log directory
80	ICALOGDIR=$LOGDIR/ICA
81	#--- farce report log directory
82	FARCELOGDIR=$LOGDIR/farce
83
84	[[ ! -z ${BRANCH_ID} ]] &&
85	case $BRANCH_ID in
86	dev* \| SVN \| trunk )
87	case $PROGNAME in
88	clfs2 ) TREE=branches/clfs-2.0/BOOK ;;
89	*) TREE=trunk/BOOK ;;
90	esac
91	LFSVRS=development
92	;;
93	branch-* )
94	LFSVRS=${BRANCH_ID}
95	TREE=branches/${BRANCH_ID#branch-}/BOOK
96	;;
97	* )
98	case $PROGNAME in
99	lfs \| hlfs )
100	LFSVRS=${BRANCH_ID}
101	TREE=tags/${BRANCH_ID}/BOOK
102	;;
103	clfs \| clfs2 )
104	LFSVRS=${BRANCH_ID}
105	TREE=tags/${BRANCH_ID}
106	;;
107	esac
108	;;
109	esac
110	fi
111
112	#===========================================================
113	# If the var BOOK contains something then, maybe, it points
114	# to a working doc.. set WC=1, else 'null'
115	#===========================================================
116	WC=${BOOK:+1}
117	#===========================================================
118
119
120	#*******************************************************************#
121	[[ $VERBOSITY > 0 ]] && echo -n "Loading function <func_check_version.sh>..."
122	source $COMMON_DIR/func_check_version.sh
123	[[ $? > 0 ]] && echo " function module did not load.." && exit 2
124	[[ $VERBOSITY > 0 ]] && echo "OK"
125
126	[[ $VERBOSITY > 0 ]] && echo -n "Loading function <func_validate_configs.sh>..."
127	source $COMMON_DIR/func_validate_configs.sh
128	[[ $? > 0 ]] && echo " function module did not load.." && exit 2
129	[[ $VERBOSITY > 0 ]] && echo "OK"
130	[[ $VERBOSITY > 0 ]] && echo "${SD_BORDER}${nl_}"
131
132
133	###################################
134	### MAIN ###
135	###################################
136
137	# Evaluate any command line switches
138
139	while test $# -gt 0 ; do
140	case $1 in
141	# Common options for {C,H}LFS books
142	--book \| -B )
143	test $# = 1 && eval "$exit_missing_arg"
144	shift
145	case $1 in
146	dev* \| SVN \| trunk )
147	LFSVRS=development
148	TREE=trunk/BOOK
149	;;
150	branch-* )
151	LFSVRS=$1
152	TREE=branches/${1#branch-}/BOOK
153	;;
154	* )
155	case $PROGNAME in
156	lfs \| hlfs )
157	LFSVRS=$1
158	TREE=tags/$1/BOOK
159	;;
160	clfs )
161	LFSVRS=$1
162	TREE=tags/$1
163	;;
164	esac
165	;;
166	esac
167	;;
168
169	--directory \| -D )
170	test $# = 1 && eval "$exit_missing_arg"
171	shift
172	case $1 in
173	-* )
174	echo -e "\n$1 isn't a valid build directory."
175	echo -e "Directory names can't start with - .\n"
176	exit 1
177	;;
178	* )
179	BUILDDIR=$1
180	JHALFSDIR=$BUILDDIR/${SCRIPT_ROOT}
181	LOGDIR=$JHALFSDIR/logs
182	TESTLOGDIR=$JHALFSDIR/test-logs
183	MKFILE=$JHALFSDIR/Makefile
184	;;
185	esac
186	;;
187
188	--get-packages \| -G ) GETPKG=1 ;;
189
190	--help \| -h ) usage \| more && exit ;;
191
192	--optimize \| -O )
193	test $# = 1 && eval "$exit_missing_arg"
194	shift
195	case $1 in
196	0 \| 1 \| 2 )
197	OPTIMIZE=$1
198	;;
199	* )
200	echo -e "\n$1 isn't a valid optimize level value."
201	echo -e "You must use 0, 1, or 2.\n"
202	exit 1
203	;;
204	esac
205	;;
206
207	--testsuites \| -T )
208	test $# = 1 && eval "$exit_missing_arg"
209	shift
210	case $1 in
211	0 \| 1 \| 2 \| 3 )
212	TEST=$1
213	;;
214	* )
215	echo -e "\n$1 isn't a valid testsuites level value."
216	echo -e "You must to use 0, 1, 2, or 3.\n"
217	exit 1
218	;;
219	esac
220	;;
221
222	--version \| -V )
223	echo "$version"
224	exit 0
225	;;
226
227	--working-copy \| -W )
228	test $# = 1 && eval "$exit_missing_arg"
229	shift
230	case $PROGNAME in # Poor checks. We should find better ones.
231	lfs)
232	if [ -d $1/chapter09 ] ; then
233	WC=1
234	BOOK=$1
235	else
236	echo -e "\nLooks like $1 isn't an LFS working copy."
237	exit 1
238	fi
239	;;
240	clfs)
241	if [ -d $1/cross-tools ] ; then
242	WC=1
243	BOOK=$1
244	else
245	echo -e "\nLooks like $1 isn't a CLFS working copy."
246	exit 1
247	fi
248	;;
249	hlfs)
250	if [ -f $1/template.xml ] ; then
251	WC=1
252	BOOK=$1
253	else
254	echo -e "\nLooks like $1 isn't an HLFS working copy."
255	exit 1
256	fi
257	;;
258	esac
259	;;
260
261	--comparison \| -C )
262	test $# = 1 && eval "$exit_missing_arg"
263	shift
264	case $1 in
265	ICA) RUN_ICA=1
266	RUN_FARCE=0
267	COMPARE=1
268	;;
269	farce) RUN_ICA=0
270	RUN_FARCE=1
271	COMPARE=1
272	;;
273	both) RUN_ICA=1
274	RUN_FARCE=1
275	COMPARE=1
276	;;
277	*)
278	echo -e "\n$1 is an unknown analysis method."
279	exit 1
280	;;
281	esac
282	;;
283
284	--fstab \| -F )
285	test $# = 1 && eval "$exit_missing_arg"
286	shift
287	if [ -f $1 ] ; then
288	FSTAB=$1
289	else
290	echo -e "\nFile $1 not found. Verify your command line.\n"
291	exit 1
292	fi
293	;;
294
295	--kernel-config \| -K )
296	test $# = 1 && eval "$exit_missing_arg"
297	shift
298	if [ -f $1 ] ; then
299	CONFIG=$1
300	else
301	echo -e "\nFile $1 not found. Verify your command line.\n"
302	exit 1
303	fi
304	;;
305
306	--run-make \| -M ) RUNMAKE=1 ;;
307
308	--rebuild \| -R ) CLEAN=1 ;;
309
310	# CLFS options
311	--arch \| -A )
312	test $# = 1 && eval "$exit_missing_arg"
313	shift
314	case $1 in
315	arm )
316	ARCH=arm
317	TARGET="arm-unknown-linux-gnu"
318	;;
319	x86 )
320	ARCH=x86
321	TARGET="i686-pc-linux-gnu"
322	;;
323	i486 )
324	ARCH=x86
325	TARGET="i486-pc-linux-gnu"
326	;;
327	i586 )
328	ARCH=x86
329	TARGET="i586-pc-linux-gnu"
330	;;
331	ppc )
332	ARCH=ppc
333	TARGET="powerpc-unknown-linux-gnu"
334	;;
335	mips )
336	ARCH=mips
337	TARGET="mips-unknown-linux-gnu"
338	;;
339	mipsel )
340	ARCH=mips
341	TARGET="mipsel-unknown-linux-gnu"
342	;;
343	sparc )
344	ARCH=sparc
345	TARGET="sparcv9-unknown-linux-gnu"
346	;;
347	x86_64-64 )
348	ARCH=x86_64-64
349	TARGET="x86_64-unknown-linux-gnu"
350	;;
351	mips64-64 )
352	ARCH=mips64-64
353	TARGET="mips-unknown-linux-gnu"
354	;;
355	mipsel64-64 )
356	ARCH=mips64-64
357	TARGET="mipsel-unknown-linux-gnu"
358	;;
359	sparc64-64 )
360	ARCH=sparc64-64
361	TARGET="sparc64-unknown-linux-gnu"
362	;;
363	alpha )
364	ARCH=alpha
365	TARGET="alpha-unknown-linux-gnu"
366	;;
367	x86_64 )
368	ARCH=x86_64
369	TARGET="x86_64-unknown-linux-gnu"
370	TARGET32="i686-pc-linux-gnu"
371	;;
372	mips64 )
373	ARCH=mips64
374	TARGET="mips-unknown-linux-gnu"
375	TARGET32="mips-unknown-linux-gnu"
376	;;
377	mipsel64 )
378	ARCH=mips64
379	TARGET="mipsel-unknown-linux-gnu"
380	TARGET32="mipsel-unknown-linux-gnu"
381	;;
382	sparc64 )
383	ARCH=sparc64
384	TARGET="sparc64-unknown-linux-gnu"
385	TARGET32="sparcv9-unknown-linux-gnu"
386	;;
387	ppc64 )
388	ARCH=ppc64
389	TARGET="powerpc64-unknown-linux-gnu"
390	TARGET32="powerpc-unknown-linux-gnu"
391	;;
392	* )
393	echo -e "\n$1 is an unknown or unsupported arch."
394	exit 1
395	;;
396	esac
397	;;
398
399	--boot-config )
400	test $# = 1 && eval "$exit_missing_arg"
401	shift
402	if [ -f $1 ] ; then
403	BOOT_CONFIG=$1
404	else
405	echo -e "\nFile $1 not found. Verify your command line.\n"
406	exit 1
407	fi
408	;;
409
410	--method )
411	test $# = 1 && eval "$exit_missing_arg"
412	shift
413	case $1 in
414	chroot \| boot )
415	METHOD=$1
416	;;
417	* )
418	echo -e "\n$1 isn't a valid build method."
419	exit 1
420	;;
421	esac
422	;;
423
424	# HLFS options
425	--model )
426	test $# = 1 && eval "$exit_missing_arg"
427	shift
428	case $1 in
429	glibc \| uclibc )
430	MODEL=$1
431	;;
432	* )
433	echo -e "\n$1 isn't a valid libc model."
434	exit 1
435	;;
436	esac
437	;;
438
439	# Unknown options
440	* ) usage ;;
441	esac
442	shift
443	done
444
445	#===================================================
446	# Set the document location...
447	# BOOK is either defined in
448	# xxx.config
449	# comand line
450	# default
451	# If set by conf file or cmd line leave it
452	# alone otherwise load the default version
453	#===================================================
454	BOOK=${BOOK:=$PROGNAME-$LFSVRS}
455	#===================================================
456
457
458	# Check for minimum gcc and kernel versions
459	#check_requirements 1 # 0/1 0-do not display values.
460	echo
461	check_version "2.6.2" "`uname -r`" "KERNEL"
462	check_version "3.0" "$BASH_VERSION" "BASH"
463	check_version "3.0" "`gcc -dumpversion`" "GCC"
464	tarVer=`tar --version \| head -n1 \| cut -d " " -f4`
465	check_version "1.15.0" "${tarVer}" "TAR"
466	echo "${SD_BORDER}${nl_}"
467
468	validate_config
469	echo "${SD_BORDER}${nl_}"
470	echo -n "Are you happy with these settings? yes/no (no): "
471	read ANSWER
472	if [ x$ANSWER != "xyes" ] ; then
473	echo "${nl_}Fix the configuration options and rerun the script.${nl_}"
474	exit 1
475	fi
476	echo "${nl_}${SD_BORDER}${nl_}"
477
478	# Load additional modules or configuration files based on global settings
479	# compare module
480	if [[ "$COMPARE" = "1" ]]; then
481	[[ $VERBOSITY > 0 ]] && echo -n "Loading compare module..."
482	source $COMMON_DIR/func_compare.sh
483	[[ $? > 0 ]] && echo "$COMMON_DIR/func_compare.sh did not load.." && exit
484	[[ $VERBOSITY > 0 ]] && echo "OK"
485	fi
486	#
487	# optimize module
488	if [[ "$OPTIMIZE" != "0" ]]; then
489	[[ $VERBOSITY > 0 ]] && echo -n "Loading optimization module..."
490	source optimize/optimize_functions
491	[[ $? > 0 ]] && echo " optimize/optimize_functions did not load.." && exit
492	[[ $VERBOSITY > 0 ]] && echo "OK"
493	#
494	# optimize configurations
495	[[ $VERBOSITY > 0 ]] && echo -n "Loading optimization config..."
496	source optimize/opt_config
497	[[ $? > 0 ]] && echo " optimize/opt_config did not load.." && exit
498	[[ $VERBOSITY > 0 ]] && echo "OK"
499	# Validate optimize settings, if required
500	validate_opt_settings
501	fi
502	#
503
504	# If $BUILDDIR has subdirectories like tools/ or bin/, stop the run
505	# and notify the user about that.
506	if [ -d $BUILDDIR/tools -o -d $BUILDDIR/bin ] && [ -z $CLEAN ] ; then
507	eval "$no_empty_builddir"
508	fi
509
510	# If requested, clean the build directory
511	clean_builddir
512
513	if [[ ! -d $JHALFSDIR ]]; then
514	mkdir -p $JHALFSDIR
515	fi
516	#
517	# Create $BUILDDIR/sources even though it could be created by get_sources()
518	if [[ ! -d $BUILDDIR/sources ]]; then
519	mkdir -p $BUILDDIR/sources
520	fi
521	#
522	# Create the log directory
523	if [[ ! -d $LOGDIR ]]; then
524	mkdir $LOGDIR
525	fi
526	>$LOGDIR/$LOG
527	#
528	[[ "$TEST" != "0" ]] && [[ ! -d $TESTLOGDIR ]] && install -d -m 1777 $TESTLOGDIR
529	#
530	if [[ "$PWD" != "$JHALFSDIR" ]]; then
531	cp $COMMON_DIR/{makefile-functions,progress_bar.sh} $JHALFSDIR/
532	#
533	[[ "$OPTIMIZE" != "0" ]] && cp optimize/opt_override $JHALFSDIR/
534	#
535	if [[ "$COMPARE" != "0" ]] ; then
536	mkdir -p $JHALFSDIR/extras
537	cp extras/* $JHALFSDIR/extras
538	fi
539	#
540	if [[ -n "$FILES" ]]; then
541	# pushd/popd necessary to deal with multiple files
542	pushd $PACKAGE_DIR 1> /dev/null
543	cp $FILES $JHALFSDIR/
544	popd 1> /dev/null
545	fi
546	#
547	if [[ "$REPORT" = "1" ]]; then
548	cp $COMMON_DIR/create-sbu_du-report.sh $JHALFSDIR/
549	# After being sure that all looks sane, dump the settings to a file
550	# This file will be used to create the REPORT header
551	validate_config > $JHALFSDIR/jhalfs.config
552	fi
553	#
554	[[ "$GETPKG" = "1" ]] && cp $COMMON_DIR/urls.xsl $JHALFSDIR/
555	#
556	cp $COMMON_DIR/packages.xsl $JHALFSDIR/
557	#
558	sed 's,FAKEDIR,'$BOOK',' $PACKAGE_DIR/$XSL > $JHALFSDIR/${XSL}
559	export XSL=$JHALFSDIR/${XSL}
560	fi
561
562	get_book
563	echo "${SD_BORDER}${nl_}"
564
565	build_Makefile
566	echo "${SD_BORDER}${nl_}"
567
568	run_make

Note: See TracBrowser for help on using the repository browser.

Download in other formats: