Context Navigation

source: master.sh@ e65a92f

experimental

Last change on this file since e65a92f was ed0a142, checked in by Manuel Canales Esparcia <manuel@…>, 19 years ago
Added dummy ICA scripts.
Property mode set to `100755`
File size: 12.0 KB

Line
1	#!/bin/bash
2	# $Id$
3	set -e
4
5
6	#>>>>>>>>>>>>>>>ERROR TRAPPING >>>>>>>>>>>>>>>>>>>>
7	#-----------------------#
8	simple_error() { # Basic error trap.... JUST DIE
9	#-----------------------#
10	# If +e then disable text output
11	if [[ "$-" =~ "e" ]]; then
12	echo -e "\n${RED}ERROR:${GREEN} basic error trapped!${OFF}\n" >&2
13	fi
14	}
15
16	see_ya() {
17	echo -e "\n\t${BOLD}Goodbye and thank you for choosing ${L_arrow}jhalfs-X${R_arrow}\n"
18	}
19	##### Simple error TRAPS
20	# ctrl-c SIGINT
21	# ctrl-y
22	# ctrl-z SIGTSTP
23	# SIGHUP 1 HANGUP
24	# SIGINT 2 INTRERRUPT FROM KEYBOARD Ctrl-C
25	# SIGQUIT 3
26	# SIGKILL 9 KILL
27	# SIGTERM 15 TERMINATION
28	# SIGSTOP 17,18,23 STOP THE PROCESS
29	#####
30	set -e
31	trap see_ya 0
32	trap simple_error ERR
33	trap 'echo -e "\n\n${RED}INTERRUPT${OFF} trapped\n" && exit 2' 1 2 3 15 17 18 23
34	#>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
35
36
37	if [ ! -L $0 ] ; then
38	echo "${nl_}${tab_}${BOLD}${RED}This script cannot be called directly: EXITING ${OFF}${nl_}"
39	exit 1
40	fi
41
42	PROGNAME=$(basename $0)
43	COMMON_DIR="common"
44	PACKAGE_DIR=$(echo $PROGNAME \| tr [a-z] [A-Z])
45	MODULE=$PACKAGE_DIR/master.sh
46	MODULE_CONFIG=$PACKAGE_DIR/config
47	VERBOSITY=0
48
49	[[ $VERBOSITY > 0 ]] && echo -n "Loading common-functions module..."
50	source $COMMON_DIR/common-functions
51	[[ $? > 0 ]] && echo " $COMMON_DIR/common-functions did not load.." && exit
52	[[ $VERBOSITY > 0 ]] && echo "OK"
53	#
54	[[ $VERBOSITY > 0 ]] && echo -n "Loading masterscript conf..."
55	source $COMMON_DIR/config
56	[[ $? > 0 ]] && echo "$COMMON_DIR/conf did not load.." && exit
57	[[ $VERBOSITY > 0 ]] && echo "OK"
58	#
59	[[ $VERBOSITY > 0 ]] && echo -n "Loading ICA module..."
60	source $COMMON_DIR/func_ICA.sh
61	[[ $? > 0 ]] && echo "$COMMON_DIR/func_ICA.sh did not load.." && exit
62	[[ $VERBOSITY > 0 ]] && echo "OK"
63	#
64	[[ $VERBOSITY > 0 ]] && echo -n "Loading config module <$MODULE_CONFIG>..."
65	source $MODULE_CONFIG
66	[[ $? > 0 ]] && echo "$MODULE_CONFIG did not load.." && exit 1
67	[[ $VERBOSITY > 0 ]] && echo "OK"
68	#
69	[[ $VERBOSITY > 0 ]] && echo -n "Loading code module <$MODULE>..."
70	source $MODULE
71	[[ $? > 0 ]] && echo "$MODULE did not load.." && exit 2
72	[[ $VERBOSITY > 0 ]] && echo "OK"
73	#
74	[[ $VERBOSITY > 0 ]] && echo "---------------${nl_}"
75
76
77	#===========================================================
78	# If the var BOOK contains something then, maybe, it points
79	# to a working doc.. set WC=1, else 'null'
80	#===========================================================
81	WC=${BOOK:+1}
82	#===========================================================
83
84
85	#*******************************************************************#
86	[[ $VERBOSITY > 0 ]] && echo -n "Loading function <func_check_version.sh>..."
87	source $COMMON_DIR/func_check_version.sh
88	[[ $? > 0 ]] && echo " function module did not load.." && exit 2
89	[[ $VERBOSITY > 0 ]] && echo "OK"
90
91	[[ $VERBOSITY > 0 ]] && echo -n "Loading function <func_validate_configs.sh>..."
92	source $COMMON_DIR/func_validate_configs.sh
93	[[ $? > 0 ]] && echo " function module did not load.." && exit 2
94	[[ $VERBOSITY > 0 ]] && echo "OK"
95	[[ $VERBOSITY > 0 ]] && echo "---------------${nl_}"
96
97
98	###################################
99	### MAIN ###
100	###################################
101
102	# Evaluate any command line switches
103
104	while test $# -gt 0 ; do
105	case $1 in
106	# Common options for all books
107	--book \| -B )
108	test $# = 1 && eval "$exit_missing_arg"
109	shift
110	case $1 in
111	dev* \| SVN \| trunk )
112	LFSVRS=development
113	;;
114	*) if [[ "$PROGNAME" = "lfs" ]]; then
115	case $1 in
116	6.1.1 )
117	echo "For stable 6.1.1 book, please use jhalfs-0.2."
118	exit 0
119	;;
120	udev*) LFSVRS=udev_update ;;
121	* ) echo "$1 is an unsupported version at this time." ;;
122	esac
123	else
124	echo "The requested version, ${L_arrow} ${BOLD}$1${OFF} ${R_arrow}, is undefined in the ${BOLD}$(echo $PROGNAME \| tr [a-z] [A-Z])${OFF} series."
125	exit 0
126	fi
127	;;
128	esac
129	;;
130
131	--directory \| -D )
132	test $# = 1 && eval "$exit_missing_arg"
133	shift
134	case $1 in
135	-* )
136	echo -e "\n$1 isn't a valid build directory."
137	echo -e "Directory names can't start with - .\n"
138	exit 1
139	;;
140	* )
141	BUILDDIR=$1
142	JHALFSDIR=$BUILDDIR/jhalfs
143	LOGDIR=$JHALFSDIR/logs
144	MKFILE=$JHALFSDIR/Makefile
145	;;
146	esac
147	;;
148
149	--get-packages \| -G ) HPKG=1 ;;
150
151	--help \| -h ) usage \| more && exit ;;
152
153	--testsuites \| -T )
154	test $# = 1 && eval "$exit_missing_arg"
155	shift
156	case $1 in
157	0 \| 1 \| 2 \| 3 )
158	TEST=$1
159	;;
160	* )
161	echo -e "\n$1 isn't a valid testsuites level value."
162	echo -e "You must to use 0, 1, 2, or 3.\n"
163	exit 1
164	;;
165	esac
166	;;
167
168	--version \| -V )
169	echo "$version"
170	exit 0
171	;;
172
173	--working-copy \| -W )
174	test $# = 1 && eval "$exit_missing_arg"
175	shift
176	case $PROGNAME in # Poor checks. We should find better ones.
177	lfs)
178	if [ -f $1/patches.ent ] ; then
179	WC=1
180	BOOK=$1
181	else
182	echo -e "\nLooks like $1 isn't a LFS working copy."
183	exit 1
184	fi
185	;;
186	clfs)
187	if [ -f $1/patches.ent ] && [ -f $1/packages.ent ]; then
188	WC=1
189	BOOK=$1
190	else
191	echo -e "\nLooks like $1 isn't a CLFS working copy."
192	exit 1
193	fi
194	;;
195	hlfs)
196	if [ -f $1/template.xml ] ; then
197	WC=1
198	BOOK=$1
199	else
200	echo -e "\nLooks like $1 isn't a HLFS working copy."
201	exit 1
202	fi
203	;;
204	blfs)
205	if [ -f $1/use-unzip.xml ] ; then
206	WC=1
207	BOOK=$1
208	else
209	echo -e "\nLooks like $1 isn't a BLFS working copy."
210	exit 1
211	fi
212	;;
213	esac
214	;;
215
216	# Common options for LFS, CLFS and HLFS
217	--do-ICA ) RUN_ICA=1 ;;
218
219	--fstab \| -F )
220	test $# = 1 && eval "$exit_missing_arg"
221	shift
222	if [ -f $1 ] ; then
223	FSTAB=$1
224	else
225	echo -e "\nFile $1 not found. Verify your command line.\n"
226	exit 1
227	fi
228	;;
229
230	--kernel-config \| -K )
231	test $# = 1 && eval "$exit_missing_arg"
232	shift
233	if [ -f $1 ] ; then
234	CONFIG=$1
235	else
236	echo -e "\nFile $1 not found. Verify your command line.\n"
237	exit 1
238	fi
239	;;
240
241	--make \| -M ) RUNMAKE=1 ;;
242
243	--rebuild \| -R ) CLEAN=1 ;;
244
245	# CLFS options
246	--arch \| -A )
247	test $# = 1 && eval "$exit_missing_arg"
248	shift
249	case $1 in
250	x86 )
251	ARCH=x86
252	TARGET="i686-pc-linux-gnu"
253	;;
254	i486 )
255	ARCH=x86
256	TARGET="i486-pc-linux-gnu"
257	;;
258	i586 )
259	ARCH=x86
260	TARGET="i586-pc-linux-gnu"
261	;;
262	ppc )
263	ARCH=ppc
264	TARGET="powerpc-unknown-linux-gnu"
265	;;
266	mips )
267	ARCH=mips
268	TARGET="mips-unknown-linux-gnu"
269	;;
270	mipsel )
271	ARCH=mips
272	TARGET="mipsel-unknown-linux-gnu"
273	;;
274	sparc )
275	ARCH=sparc
276	TARGET="sparcv9-unknown-linux-gnu"
277	;;
278	sparcv8 )
279	ARCH=sparcv8
280	TARGET="sparc-unknown-linux-gnu"
281	;;
282	x86_64-64 )
283	ARCH=x86_64-64
284	TARGET="x86_64-unknown-linux-gnu"
285	;;
286	mips64-64 )
287	ARCH=mips64-64
288	TARGET="mips-unknown-linux-gnu"
289	;;
290	mipsel64-64 )
291	ARCH=mips64-64
292	TARGET="mipsel-unknown-linux-gnu"
293	;;
294	sparc64-64 )
295	ARCH=sparc64-64
296	TARGET="sparc64-unknown-linux-gnu"
297	;;
298	alpha )
299	ARCH=alpha
300	TARGET="alpha-unknown-linux-gnu"
301	;;
302	x86_64 )
303	ARCH=x86_64
304	TARGET="x86_64-unknown-linux-gnu"
305	TARGET32="i686-pc-linux-gnu"
306	;;
307	mips64 )
308	ARCH=mips64
309	TARGET="mips-unknown-linux-gnu"
310	TARGET32="mips-unknown-linux-gnu"
311	;;
312	mipsel64 )
313	ARCH=mips64
314	TARGET="mipsel-unknown-linux-gnu"
315	TARGET32="mipsel-unknown-linux-gnu"
316	;;
317	sparc64 )
318	ARCH=sparc64
319	TARGET="sparc64-unknown-linux-gnu"
320	TARGET32="sparcv9-unknown-linux-gnu"
321	;;
322	ppc64 )
323	ARCH=ppc64
324	TARGET="powerpc64-unknown-linux-gnu"
325	TARGET32="powerpc-unknown-linux-gnu"
326	;;
327	* )
328	echo -e "\n$1 is an unknown or unsopported arch."
329	exit 1
330	;;
331	esac
332	;;
333
334	--boot-config )
335	test $# = 1 && eval "$exit_missing_arg"
336	shift
337	if [ -f $1 ] ; then
338	BOOT_CONFIG=$1
339	else
340	echo -e "\nFile $1 not found. Verify your command line.\n"
341	exit 1
342	fi
343	;;
344
345	--method )
346	test $# = 1 && eval "$exit_missing_arg"
347	shift
348	case $1 in
349	chroot \| boot )
350	METHOD=$1
351	;;
352	* )
353	echo -e "\n$1 isn't a valid build method."
354	exit 1
355	;;
356	esac
357	;;
358
359	# HLFS options
360	--model )
361	test $# = 1 && eval "$exit_missing_arg"
362	shift
363	case $1 in
364	glibc \| uclibc )
365	MODEL=$1
366	;;
367	* )
368	echo -e "\n$1 isn't a valid libc model."
369	exit 1
370	;;
371	esac
372	;;
373
374	# BLFS options
375	--dependencies )
376	test $# = 1 && eval "$exit_missing_arg"
377	shift
378	case $1 in
379	0 \| 1 \| 2 )
380	DEPEND=$1
381	;;
382	* )
383	echo -e "\n$1 isn't a valid dependencies level."
384	exit 1
385	;;
386	esac
387	;;
388
389	# Unknown options
390	* ) usage ;;
391	esac
392	shift
393	done
394
395	# Find the download client to use, if not already specified.
396
397	if [ -z $DL ] ; then
398	if [ `type -p wget` ] ; then
399	DL=wget
400	elif [ `type -p curl` ] ; then
401	DL=curl
402	else
403	eval "$no_dl_client"
404	fi
405	fi
406
407	#===================================================
408	# Set the document location...
409	# BOOK is either defined in
410	# xxx.config
411	# comand line
412	# default
413	# If set by conf file or cmd line leave it
414	# alone otherwise load the default version
415	#===================================================
416	BOOK=${BOOK:=$PROGNAME-$LFSVRS}
417	#===================================================
418
419
420	# Check for minumum gcc and kernel versions
421	#check_requirements 1 # 0/1 0-do not display values.
422	echo
423	check_version "2.6.2" "`uname -r`" "KERNEL"
424	check_version "3.0" "$BASH_VERSION" "BASH"
425	check_version "3.0" "`gcc -dumpversion`" "GCC"
426	tarVer=`tar --version`
427	check_version "1.15.0" "${tarVer##* }" "TAR"
428	echo "---------------${nl_}"
429
430	validate_config
431	echo "---------------${nl_}"
432
433	echo -n "Are you happy with these settings? yes/no (no): "
434	read ANSWER
435	if [ x$ANSWER != "xyes" ] ; then
436	echo "${nl_}Fix the configuration options and rerun the script.${nl_}"
437	exit 1
438	fi
439	echo "${nl_}---------------${nl_}"
440
441	# Prevents setting "-d /" by mistake.
442
443	if [ $BUILDDIR = / ] ; then
444	echo -ne "\nThe root directory can't be used to build LFS.\n\n"
445	exit 1
446	fi
447
448	# If $BUILDDIR has subdirectories like tools/ or bin/, stop the run
449	# and notify the user about that.
450
451	if [ -d $BUILDDIR/tools -o -d $BUILDDIR/bin ] && [ -z $CLEAN ] ; then
452	eval "$no_empty_builddir"
453	fi
454
455	# If requested, clean the build directory
456	clean_builddir
457
458	if [[ ! -d $JHALFSDIR ]]; then
459	mkdir -p $JHALFSDIR
460	fi
461
462	if [[ "$PWD" != "$JHALFSDIR" ]]; then
463	cp $COMMON_DIR/makefile-functions $JHALFSDIR/
464	if [[ "$RUN_ICA" != "0" ]]; then
465	cp $COMMON_DIR/do_ica_{prep,work} $JHALFSDIR/
466	fi
467	if [[ -n "$FILES" ]]; then
468	# pushd/popd necessary to deal with mulitiple files
469	pushd $PACKAGE_DIR 1> /dev/null
470	cp $FILES $JHALFSDIR/
471	popd 1> /dev/null
472	fi
473	sed 's,FAKEDIR,'$BOOK',' $PACKAGE_DIR/$XSL > $JHALFSDIR/${XSL}
474	export XSL=$JHALFSDIR/${XSL}
475	fi
476
477	if [[ ! -d $LOGDIR ]]; then
478	mkdir $LOGDIR
479	fi
480	>$LOGDIR/$LOG
481
482	get_book
483	echo "---------------${nl_}"
484
485	build_Makefile
486	echo "---------------${nl_}"
487
488	run_make
489

Note: See TracBrowser for help on using the repository browser.

Download in other formats: