source: master.sh@ fb68d23

experimental
Last change on this file since fb68d23 was fb68d23, checked in by Manuel Canales Esparcia <manuel@…>, 19 years ago

Added COMPARE config option to avoid to have to test if RUN_ICA or RUN_FARCE are set.
Changed ICA_rebuild by system_rebuild.
  • Property mode set to 100755
File size: 12.5 KB
Line 
1#!/bin/bash
2# $Id$
3set -e
4
5
6#>>>>>>>>>>>>>>>ERROR TRAPPING >>>>>>>>>>>>>>>>>>>>
7#-----------------------#
8simple_error() { # Basic error trap.... JUST DIE
9#-----------------------#
10 # If +e then disable text output
11 if [[ "$-" =~ "e" ]]; then
12 echo -e "\n${RED}ERROR:${GREEN} basic error trapped!${OFF}\n" >&2
13 fi
14}
15
16see_ya() {
17 echo -e "\n\t${BOLD}Goodbye and thank you for choosing ${L_arrow}jhalfs-X${R_arrow}\n"
18}
19##### Simple error TRAPS
20# ctrl-c SIGINT
21# ctrl-y
22# ctrl-z SIGTSTP
23# SIGHUP 1 HANGUP
24# SIGINT 2 INTRERRUPT FROM KEYBOARD Ctrl-C
25# SIGQUIT 3
26# SIGKILL 9 KILL
27# SIGTERM 15 TERMINATION
28# SIGSTOP 17,18,23 STOP THE PROCESS
29#####
30set -e
31trap see_ya 0
32trap simple_error ERR
33trap 'echo -e "\n\n${RED}INTERRUPT${OFF} trapped\n" && exit 2' 1 2 3 15 17 18 23
34#>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
35
36
37if [ ! -L $0 ] ; then
38 echo "${nl_}${tab_}${BOLD}${RED}This script cannot be called directly: EXITING ${OFF}${nl_}"
39 exit 1
40fi
41
42 PROGNAME=$(basename $0)
43 COMMON_DIR="common"
44 PACKAGE_DIR=$(echo $PROGNAME | tr [a-z] [A-Z])
45 MODULE=$PACKAGE_DIR/master.sh
46MODULE_CONFIG=$PACKAGE_DIR/config
47 VERBOSITY=0
48
49[[ $VERBOSITY > 0 ]] && echo -n "Loading common-functions module..."
50source $COMMON_DIR/common-functions
51[[ $? > 0 ]] && echo " $COMMON_DIR/common-functions did not load.." && exit
52[[ $VERBOSITY > 0 ]] && echo "OK"
53#
54[[ $VERBOSITY > 0 ]] && echo -n "Loading masterscript conf..."
55source $COMMON_DIR/config
56[[ $? > 0 ]] && echo "$COMMON_DIR/conf did not load.." && exit
57[[ $VERBOSITY > 0 ]] && echo "OK"
58#
59[[ $VERBOSITY > 0 ]] && echo -n "Loading ICA module..."
60source $COMMON_DIR/func_ICA.sh
61[[ $? > 0 ]] && echo "$COMMON_DIR/func_ICA.sh did not load.." && exit
62[[ $VERBOSITY > 0 ]] && echo "OK"
63#
64[[ $VERBOSITY > 0 ]] && echo -n "Loading config module <$MODULE_CONFIG>..."
65source $MODULE_CONFIG
66[[ $? > 0 ]] && echo "$MODULE_CONFIG did not load.." && exit 1
67[[ $VERBOSITY > 0 ]] && echo "OK"
68#
69[[ $VERBOSITY > 0 ]] && echo -n "Loading code module <$MODULE>..."
70source $MODULE
71[[ $? > 0 ]] && echo "$MODULE did not load.." && exit 2
72[[ $VERBOSITY > 0 ]] && echo "OK"
73#
74[[ $VERBOSITY > 0 ]] && echo "---------------${nl_}"
75
76
77#===========================================================
78# If the var BOOK contains something then, maybe, it points
79# to a working doc.. set WC=1, else 'null'
80#===========================================================
81WC=${BOOK:+1}
82#===========================================================
83
84
85#*******************************************************************#
86[[ $VERBOSITY > 0 ]] && echo -n "Loading function <func_check_version.sh>..."
87source $COMMON_DIR/func_check_version.sh
88[[ $? > 0 ]] && echo " function module did not load.." && exit 2
89[[ $VERBOSITY > 0 ]] && echo "OK"
90
91[[ $VERBOSITY > 0 ]] && echo -n "Loading function <func_validate_configs.sh>..."
92source $COMMON_DIR/func_validate_configs.sh
93[[ $? > 0 ]] && echo " function module did not load.." && exit 2
94[[ $VERBOSITY > 0 ]] && echo "OK"
95[[ $VERBOSITY > 0 ]] && echo "---------------${nl_}"
96
97
98###################################
99### MAIN ###
100###################################
101
102# Evaluate any command line switches
103
104while test $# -gt 0 ; do
105 case $1 in
106 # Common options for all books
107 --book | -B )
108 test $# = 1 && eval "$exit_missing_arg"
109 shift
110 case $1 in
111 dev* | SVN | trunk )
112 LFSVRS=development
113 ;;
114 *) if [[ "$PROGNAME" = "lfs" ]]; then
115 case $1 in
116 6.1.1 )
117 echo "For stable 6.1.1 book, please use jhalfs-0.2."
118 exit 0
119 ;;
120 udev*) LFSVRS=udev_update ;;
121 * ) echo "$1 is an unsupported version at this time." ;;
122 esac
123 else
124 echo "The requested version, ${L_arrow} ${BOLD}$1${OFF} ${R_arrow}, is undefined in the ${BOLD}$(echo $PROGNAME | tr [a-z] [A-Z])${OFF} series."
125 exit 0
126 fi
127 ;;
128 esac
129 ;;
130
131 --directory | -D )
132 test $# = 1 && eval "$exit_missing_arg"
133 shift
134 case $1 in
135 -* )
136 echo -e "\n$1 isn't a valid build directory."
137 echo -e "Directory names can't start with - .\n"
138 exit 1
139 ;;
140 * )
141 BUILDDIR=$1
142 JHALFSDIR=$BUILDDIR/jhalfs
143 LOGDIR=$JHALFSDIR/logs
144 MKFILE=$JHALFSDIR/Makefile
145 ;;
146 esac
147 ;;
148
149 --get-packages | -G ) HPKG=1 ;;
150
151 --help | -h ) usage | more && exit ;;
152
153 --testsuites | -T )
154 test $# = 1 && eval "$exit_missing_arg"
155 shift
156 case $1 in
157 0 | 1 | 2 | 3 )
158 TEST=$1
159 ;;
160 * )
161 echo -e "\n$1 isn't a valid testsuites level value."
162 echo -e "You must to use 0, 1, 2, or 3.\n"
163 exit 1
164 ;;
165 esac
166 ;;
167
168 --version | -V )
169 echo "$version"
170 exit 0
171 ;;
172
173 --working-copy | -W )
174 test $# = 1 && eval "$exit_missing_arg"
175 shift
176 case $PROGNAME in # Poor checks. We should find better ones.
177 lfs)
178 if [ -f $1/patches.ent ] ; then
179 WC=1
180 BOOK=$1
181 else
182 echo -e "\nLooks like $1 isn't a LFS working copy."
183 exit 1
184 fi
185 ;;
186 clfs)
187 if [ -f $1/patches.ent ] && [ -f $1/packages.ent ]; then
188 WC=1
189 BOOK=$1
190 else
191 echo -e "\nLooks like $1 isn't a CLFS working copy."
192 exit 1
193 fi
194 ;;
195 hlfs)
196 if [ -f $1/template.xml ] ; then
197 WC=1
198 BOOK=$1
199 else
200 echo -e "\nLooks like $1 isn't a HLFS working copy."
201 exit 1
202 fi
203 ;;
204 blfs)
205 if [ -f $1/use-unzip.xml ] ; then
206 WC=1
207 BOOK=$1
208 else
209 echo -e "\nLooks like $1 isn't a BLFS working copy."
210 exit 1
211 fi
212 ;;
213 esac
214 ;;
215
216 # Common options for LFS, CLFS and HLFS
217 --comparasion | -C )
218 test $# = 1 && eval "$exit_missing_arg"
219 shift
220 case $1 in
221 ICA) RUN_ICA=1
222 RUN_FARCE=0
223 COMPARE=1
224 ;;
225 farce) RUN_ICA=0
226 RUN_FARCE=1
227 COMPARE=1
228 ;;
229 both) RUN_ICA=1
230 RUN_FARCE=1
231 COMPARE=1
232 *)
233 echo -e "\n$1 is an unknown analisys method."
234 exit 1
235 ;;
236 esac
237 ;;
238
239 --fstab | -F )
240 test $# = 1 && eval "$exit_missing_arg"
241 shift
242 if [ -f $1 ] ; then
243 FSTAB=$1
244 else
245 echo -e "\nFile $1 not found. Verify your command line.\n"
246 exit 1
247 fi
248 ;;
249
250 --kernel-config | -K )
251 test $# = 1 && eval "$exit_missing_arg"
252 shift
253 if [ -f $1 ] ; then
254 CONFIG=$1
255 else
256 echo -e "\nFile $1 not found. Verify your command line.\n"
257 exit 1
258 fi
259 ;;
260
261 --make | -M ) RUNMAKE=1 ;;
262
263 --rebuild | -R ) CLEAN=1 ;;
264
265 # CLFS options
266 --arch | -A )
267 test $# = 1 && eval "$exit_missing_arg"
268 shift
269 case $1 in
270 x86 )
271 ARCH=x86
272 TARGET="i686-pc-linux-gnu"
273 ;;
274 i486 )
275 ARCH=x86
276 TARGET="i486-pc-linux-gnu"
277 ;;
278 i586 )
279 ARCH=x86
280 TARGET="i586-pc-linux-gnu"
281 ;;
282 ppc )
283 ARCH=ppc
284 TARGET="powerpc-unknown-linux-gnu"
285 ;;
286 mips )
287 ARCH=mips
288 TARGET="mips-unknown-linux-gnu"
289 ;;
290 mipsel )
291 ARCH=mips
292 TARGET="mipsel-unknown-linux-gnu"
293 ;;
294 sparc )
295 ARCH=sparc
296 TARGET="sparcv9-unknown-linux-gnu"
297 ;;
298 sparcv8 )
299 ARCH=sparcv8
300 TARGET="sparc-unknown-linux-gnu"
301 ;;
302 x86_64-64 )
303 ARCH=x86_64-64
304 TARGET="x86_64-unknown-linux-gnu"
305 ;;
306 mips64-64 )
307 ARCH=mips64-64
308 TARGET="mips-unknown-linux-gnu"
309 ;;
310 mipsel64-64 )
311 ARCH=mips64-64
312 TARGET="mipsel-unknown-linux-gnu"
313 ;;
314 sparc64-64 )
315 ARCH=sparc64-64
316 TARGET="sparc64-unknown-linux-gnu"
317 ;;
318 alpha )
319 ARCH=alpha
320 TARGET="alpha-unknown-linux-gnu"
321 ;;
322 x86_64 )
323 ARCH=x86_64
324 TARGET="x86_64-unknown-linux-gnu"
325 TARGET32="i686-pc-linux-gnu"
326 ;;
327 mips64 )
328 ARCH=mips64
329 TARGET="mips-unknown-linux-gnu"
330 TARGET32="mips-unknown-linux-gnu"
331 ;;
332 mipsel64 )
333 ARCH=mips64
334 TARGET="mipsel-unknown-linux-gnu"
335 TARGET32="mipsel-unknown-linux-gnu"
336 ;;
337 sparc64 )
338 ARCH=sparc64
339 TARGET="sparc64-unknown-linux-gnu"
340 TARGET32="sparcv9-unknown-linux-gnu"
341 ;;
342 ppc64 )
343 ARCH=ppc64
344 TARGET="powerpc64-unknown-linux-gnu"
345 TARGET32="powerpc-unknown-linux-gnu"
346 ;;
347 * )
348 echo -e "\n$1 is an unknown or unsopported arch."
349 exit 1
350 ;;
351 esac
352 ;;
353
354 --boot-config )
355 test $# = 1 && eval "$exit_missing_arg"
356 shift
357 if [ -f $1 ] ; then
358 BOOT_CONFIG=$1
359 else
360 echo -e "\nFile $1 not found. Verify your command line.\n"
361 exit 1
362 fi
363 ;;
364
365 --method )
366 test $# = 1 && eval "$exit_missing_arg"
367 shift
368 case $1 in
369 chroot | boot )
370 METHOD=$1
371 ;;
372 * )
373 echo -e "\n$1 isn't a valid build method."
374 exit 1
375 ;;
376 esac
377 ;;
378
379 # HLFS options
380 --model )
381 test $# = 1 && eval "$exit_missing_arg"
382 shift
383 case $1 in
384 glibc | uclibc )
385 MODEL=$1
386 ;;
387 * )
388 echo -e "\n$1 isn't a valid libc model."
389 exit 1
390 ;;
391 esac
392 ;;
393
394 # BLFS options
395 --dependencies )
396 test $# = 1 && eval "$exit_missing_arg"
397 shift
398 case $1 in
399 0 | 1 | 2 )
400 DEPEND=$1
401 ;;
402 * )
403 echo -e "\n$1 isn't a valid dependencies level."
404 exit 1
405 ;;
406 esac
407 ;;
408
409 # Unknown options
410 * ) usage ;;
411 esac
412 shift
413done
414
415# Find the download client to use, if not already specified.
416
417if [ -z $DL ] ; then
418 if [ `type -p wget` ] ; then
419 DL=wget
420 elif [ `type -p curl` ] ; then
421 DL=curl
422 else
423 eval "$no_dl_client"
424 fi
425fi
426
427#===================================================
428# Set the document location...
429# BOOK is either defined in
430# xxx.config
431# comand line
432# default
433# If set by conf file or cmd line leave it
434# alone otherwise load the default version
435#===================================================
436BOOK=${BOOK:=$PROGNAME-$LFSVRS}
437#===================================================
438
439
440# Check for minumum gcc and kernel versions
441#check_requirements 1 # 0/1 0-do not display values.
442echo
443check_version "2.6.2" "`uname -r`" "KERNEL"
444check_version "3.0" "$BASH_VERSION" "BASH"
445check_version "3.0" "`gcc -dumpversion`" "GCC"
446tarVer=`tar --version`
447check_version "1.15.0" "${tarVer##* }" "TAR"
448echo "---------------${nl_}"
449
450validate_config
451echo "---------------${nl_}"
452
453echo -n "Are you happy with these settings? yes/no (no): "
454read ANSWER
455if [ x$ANSWER != "xyes" ] ; then
456 echo "${nl_}Fix the configuration options and rerun the script.${nl_}"
457 exit 1
458fi
459echo "${nl_}---------------${nl_}"
460
461# Prevents setting "-d /" by mistake.
462
463if [ $BUILDDIR = / ] ; then
464 echo -ne "\nThe root directory can't be used to build LFS.\n\n"
465 exit 1
466fi
467
468# If $BUILDDIR has subdirectories like tools/ or bin/, stop the run
469# and notify the user about that.
470
471if [ -d $BUILDDIR/tools -o -d $BUILDDIR/bin ] && [ -z $CLEAN ] ; then
472 eval "$no_empty_builddir"
473fi
474
475# If requested, clean the build directory
476clean_builddir
477
478if [[ ! -d $JHALFSDIR ]]; then
479 mkdir -p $JHALFSDIR
480fi
481
482if [[ "$PWD" != "$JHALFSDIR" ]]; then
483 cp $COMMON_DIR/makefile-functions $JHALFSDIR/
484 if [[ "$COMPARE" != "0" ]] ; then
485 mkdir $JHALFSDIR/extras
486 cp extras/* $JHALFSDIR/extras
487 fi
488 if [[ -n "$FILES" ]]; then
489 # pushd/popd necessary to deal with mulitiple files
490 pushd $PACKAGE_DIR 1> /dev/null
491 cp $FILES $JHALFSDIR/
492 popd 1> /dev/null
493 fi
494 sed 's,FAKEDIR,'$BOOK',' $PACKAGE_DIR/$XSL > $JHALFSDIR/${XSL}
495 export XSL=$JHALFSDIR/${XSL}
496fi
497
498if [[ ! -d $LOGDIR ]]; then
499 mkdir $LOGDIR
500fi
501>$LOGDIR/$LOG
502
503get_book
504echo "---------------${nl_}"
505
506build_Makefile
507echo "---------------${nl_}"
508
509run_make
510
Note: See TracBrowser for help on using the repository browser.