Context Navigation

source: master.sh@ 40d4ca7

experimental

Last change on this file since 40d4ca7 was e35e794, checked in by Manuel Canales Esparcia <manuel@…>, 19 years ago
Merged r2750 from trunk.
Property mode set to `100755`
File size: 13.3 KB

Line
1	#!/bin/bash
2	# $Id$
3	set -e
4
5
6	#>>>>>>>>>>>>>>>ERROR TRAPPING >>>>>>>>>>>>>>>>>>>>
7	#-----------------------#
8	simple_error() { # Basic error trap.... JUST DIE
9	#-----------------------#
10	# If +e then disable text output
11	if [[ "$-" =~ "e" ]]; then
12	echo -e "\n${RED}ERROR:${GREEN} basic error trapped!${OFF}\n" >&2
13	fi
14	}
15
16	see_ya() {
17	echo -e "\n\t${BOLD}Goodbye and thank you for choosing ${L_arrow}jhalfs-X${R_arrow}\n"
18	}
19	##### Simple error TRAPS
20	# ctrl-c SIGINT
21	# ctrl-y
22	# ctrl-z SIGTSTP
23	# SIGHUP 1 HANGUP
24	# SIGINT 2 INTRERRUPT FROM KEYBOARD Ctrl-C
25	# SIGQUIT 3
26	# SIGKILL 9 KILL
27	# SIGTERM 15 TERMINATION
28	# SIGSTOP 17,18,23 STOP THE PROCESS
29	#####
30	set -e
31	trap see_ya 0
32	trap simple_error ERR
33	trap 'echo -e "\n\n${RED}INTERRUPT${OFF} trapped\n" && exit 2' 1 2 3 15 17 18 23
34	#>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
35
36
37	if [ ! -L $0 ] ; then
38	echo "${nl_}${tab_}${BOLD}${RED}This script cannot be called directly: EXITING ${OFF}${nl_}"
39	exit 1
40	fi
41
42	PROGNAME=$(basename $0)
43	COMMON_DIR="common"
44	PACKAGE_DIR=$(echo $PROGNAME \| tr [a-z] [A-Z])
45	MODULE=$PACKAGE_DIR/master.sh
46	MODULE_CONFIG=$PACKAGE_DIR/config
47	VERBOSITY=0
48
49	[[ $VERBOSITY > 0 ]] && echo -n "Loading common-functions module..."
50	source $COMMON_DIR/common-functions
51	[[ $? > 0 ]] && echo " $COMMON_DIR/common-functions did not load.." && exit
52	[[ $VERBOSITY > 0 ]] && echo "OK"
53	#
54	[[ $VERBOSITY > 0 ]] && echo -n "Loading masterscript conf..."
55	source $COMMON_DIR/config
56	[[ $? > 0 ]] && echo "$COMMON_DIR/conf did not load.." && exit
57	[[ $VERBOSITY > 0 ]] && echo "OK"
58	#
59	[[ $VERBOSITY > 0 ]] && echo -n "Loading config module <$MODULE_CONFIG>..."
60	source $MODULE_CONFIG
61	[[ $? > 0 ]] && echo "$MODULE_CONFIG did not load.." && exit 1
62	[[ $VERBOSITY > 0 ]] && echo "OK"
63	#
64	[[ $VERBOSITY > 0 ]] && echo -n "Loading code module <$MODULE>..."
65	source $MODULE
66	[[ $? > 0 ]] && echo "$MODULE did not load.." && exit 2
67	[[ $VERBOSITY > 0 ]] && echo "OK"
68	#
69	[[ $VERBOSITY > 0 ]] && echo "${SD_BORDER}${nl_}"
70
71
72	#===========================================================
73	# If the var BOOK contains something then, maybe, it points
74	# to a working doc.. set WC=1, else 'null'
75	#===========================================================
76	WC=${BOOK:+1}
77	#===========================================================
78
79
80	#*******************************************************************#
81	[[ $VERBOSITY > 0 ]] && echo -n "Loading function <func_check_version.sh>..."
82	source $COMMON_DIR/func_check_version.sh
83	[[ $? > 0 ]] && echo " function module did not load.." && exit 2
84	[[ $VERBOSITY > 0 ]] && echo "OK"
85
86	[[ $VERBOSITY > 0 ]] && echo -n "Loading function <func_validate_configs.sh>..."
87	source $COMMON_DIR/func_validate_configs.sh
88	[[ $? > 0 ]] && echo " function module did not load.." && exit 2
89	[[ $VERBOSITY > 0 ]] && echo "OK"
90	[[ $VERBOSITY > 0 ]] && echo "${SD_BORDER}${nl_}"
91
92
93	###################################
94	### MAIN ###
95	###################################
96
97	# Evaluate any command line switches
98
99	while test $# -gt 0 ; do
100	case $1 in
101	# Common options for {C,H}LFS books
102	--book \| -B )
103	test $# = 1 && eval "$exit_missing_arg"
104	shift
105	case $1 in
106	dev* \| SVN \| trunk )
107	LFSVRS=development
108	;;
109	*) if [[ "$PROGNAME" = "lfs" ]]; then
110	case $1 in
111	6.1.1 )
112	echo "For stable 6.1.1 book, please use jhalfs-0.2."
113	exit 0
114	;;
115	* )
116	echo "$1 is an unsupported version at this time."
117	exit 0
118	;;
119	esac
120	else
121	echo "The requested version, ${L_arrow} ${BOLD}$1${OFF} ${R_arrow}, is undefined in the ${BOLD}$(echo $PROGNAME \| tr [a-z] [A-Z])${OFF} series."
122	exit 0
123	fi
124	;;
125	esac
126	;;
127
128	--directory \| -D )
129	test $# = 1 && eval "$exit_missing_arg"
130	shift
131	case $1 in
132	-* )
133	echo -e "\n$1 isn't a valid build directory."
134	echo -e "Directory names can't start with - .\n"
135	exit 1
136	;;
137	* )
138	BUILDDIR=$1
139	JHALFSDIR=$BUILDDIR/${SCRIPT_ROOT}
140	LOGDIR=$JHALFSDIR/logs
141	TESTLOGDIR=$JHALFSDIR/test-logs
142	MKFILE=$JHALFSDIR/Makefile
143	;;
144	esac
145	;;
146
147	--get-packages \| -G ) GETPKG=1 ;;
148
149	--help \| -h ) usage \| more && exit ;;
150
151	--optimize \| -O )
152	test $# = 1 && eval "$exit_missing_arg"
153	shift
154	case $1 in
155	0 \| 1 \| 2 )
156	OPTIMIZE=$1
157	;;
158	* )
159	echo -e "\n$1 isn't a valid optimize level value."
160	echo -e "You must use 0, 1, or 2.\n"
161	exit 1
162	;;
163	esac
164	;;
165
166	--testsuites \| -T )
167	test $# = 1 && eval "$exit_missing_arg"
168	shift
169	case $1 in
170	0 \| 1 \| 2 \| 3 )
171	TEST=$1
172	;;
173	* )
174	echo -e "\n$1 isn't a valid testsuites level value."
175	echo -e "You must to use 0, 1, 2, or 3.\n"
176	exit 1
177	;;
178	esac
179	;;
180
181	--version \| -V )
182	echo "$version"
183	exit 0
184	;;
185
186	--working-copy \| -W )
187	test $# = 1 && eval "$exit_missing_arg"
188	shift
189	case $PROGNAME in # Poor checks. We should find better ones.
190	lfs)
191	if [ -d $1/chapter09 ] ; then
192	WC=1
193	BOOK=$1
194	else
195	echo -e "\nLooks like $1 isn't a LFS working copy."
196	exit 1
197	fi
198	;;
199	clfs)
200	if [ -d $1/cross-tools ] ; then
201	WC=1
202	BOOK=$1
203	else
204	echo -e "\nLooks like $1 isn't a CLFS working copy."
205	exit 1
206	fi
207	;;
208	hlfs)
209	if [ -f $1/template.xml ] ; then
210	WC=1
211	BOOK=$1
212	else
213	echo -e "\nLooks like $1 isn't a HLFS working copy."
214	exit 1
215	fi
216	;;
217	esac
218	;;
219
220	--comparasion \| -C )
221	test $# = 1 && eval "$exit_missing_arg"
222	shift
223	case $1 in
224	ICA) RUN_ICA=1
225	RUN_FARCE=0
226	COMPARE=1
227	;;
228	farce) RUN_ICA=0
229	RUN_FARCE=1
230	COMPARE=1
231	;;
232	both) RUN_ICA=1
233	RUN_FARCE=1
234	COMPARE=1
235	;;
236	*)
237	echo -e "\n$1 is an unknown analysis method."
238	exit 1
239	;;
240	esac
241	;;
242
243	--fstab \| -F )
244	test $# = 1 && eval "$exit_missing_arg"
245	shift
246	if [ -f $1 ] ; then
247	FSTAB=$1
248	else
249	echo -e "\nFile $1 not found. Verify your command line.\n"
250	exit 1
251	fi
252	;;
253
254	--kernel-config \| -K )
255	test $# = 1 && eval "$exit_missing_arg"
256	shift
257	if [ -f $1 ] ; then
258	CONFIG=$1
259	else
260	echo -e "\nFile $1 not found. Verify your command line.\n"
261	exit 1
262	fi
263	;;
264
265	--make \| -M ) RUNMAKE=1 ;;
266
267	--rebuild \| -R ) CLEAN=1 ;;
268
269	# CLFS options
270	--arch \| -A )
271	test $# = 1 && eval "$exit_missing_arg"
272	shift
273	case $1 in
274	x86 )
275	ARCH=x86
276	TARGET="i686-pc-linux-gnu"
277	;;
278	i486 )
279	ARCH=x86
280	TARGET="i486-pc-linux-gnu"
281	;;
282	i586 )
283	ARCH=x86
284	TARGET="i586-pc-linux-gnu"
285	;;
286	ppc )
287	ARCH=ppc
288	TARGET="powerpc-unknown-linux-gnu"
289	;;
290	mips )
291	ARCH=mips
292	TARGET="mips-unknown-linux-gnu"
293	;;
294	mipsel )
295	ARCH=mips
296	TARGET="mipsel-unknown-linux-gnu"
297	;;
298	sparc )
299	ARCH=sparc
300	TARGET="sparcv9-unknown-linux-gnu"
301	;;
302	x86_64-64 )
303	ARCH=x86_64-64
304	TARGET="x86_64-unknown-linux-gnu"
305	;;
306	mips64-64 )
307	ARCH=mips64-64
308	TARGET="mips-unknown-linux-gnu"
309	;;
310	mipsel64-64 )
311	ARCH=mips64-64
312	TARGET="mipsel-unknown-linux-gnu"
313	;;
314	sparc64-64 )
315	ARCH=sparc64-64
316	TARGET="sparc64-unknown-linux-gnu"
317	;;
318	alpha )
319	ARCH=alpha
320	TARGET="alpha-unknown-linux-gnu"
321	;;
322	x86_64 )
323	ARCH=x86_64
324	TARGET="x86_64-unknown-linux-gnu"
325	TARGET32="i686-pc-linux-gnu"
326	;;
327	mips64 )
328	ARCH=mips64
329	TARGET="mips-unknown-linux-gnu"
330	TARGET32="mips-unknown-linux-gnu"
331	;;
332	mipsel64 )
333	ARCH=mips64
334	TARGET="mipsel-unknown-linux-gnu"
335	TARGET32="mipsel-unknown-linux-gnu"
336	;;
337	sparc64 )
338	ARCH=sparc64
339	TARGET="sparc64-unknown-linux-gnu"
340	TARGET32="sparcv9-unknown-linux-gnu"
341	;;
342	ppc64 )
343	ARCH=ppc64
344	TARGET="powerpc64-unknown-linux-gnu"
345	TARGET32="powerpc-unknown-linux-gnu"
346	;;
347	* )
348	echo -e "\n$1 is an unknown or unsopported arch."
349	exit 1
350	;;
351	esac
352	;;
353
354	--boot-config )
355	test $# = 1 && eval "$exit_missing_arg"
356	shift
357	if [ -f $1 ] ; then
358	BOOT_CONFIG=$1
359	else
360	echo -e "\nFile $1 not found. Verify your command line.\n"
361	exit 1
362	fi
363	;;
364
365	--method )
366	test $# = 1 && eval "$exit_missing_arg"
367	shift
368	case $1 in
369	chroot \| boot )
370	METHOD=$1
371	;;
372	* )
373	echo -e "\n$1 isn't a valid build method."
374	exit 1
375	;;
376	esac
377	;;
378
379	# HLFS options
380	--model )
381	test $# = 1 && eval "$exit_missing_arg"
382	shift
383	case $1 in
384	glibc \| uclibc )
385	MODEL=$1
386	;;
387	* )
388	echo -e "\n$1 isn't a valid libc model."
389	exit 1
390	;;
391	esac
392	;;
393
394	# Unknown options
395	* ) usage ;;
396	esac
397	shift
398	done
399
400	#===================================================
401	# Set the document location...
402	# BOOK is either defined in
403	# xxx.config
404	# comand line
405	# default
406	# If set by conf file or cmd line leave it
407	# alone otherwise load the default version
408	#===================================================
409	BOOK=${BOOK:=$PROGNAME-$LFSVRS}
410	#===================================================
411
412
413	# Check for minumum gcc and kernel versions
414	#check_requirements 1 # 0/1 0-do not display values.
415	echo
416	check_version "2.6.2" "`uname -r`" "KERNEL"
417	check_version "3.0" "$BASH_VERSION" "BASH"
418	check_version "3.0" "`gcc -dumpversion`" "GCC"
419	tarVer=`tar --version \| head -n1 \| cut -d " " -f4`
420	check_version "1.15.0" "${tarVer}" "TAR"
421	echo "${SD_BORDER}${nl_}"
422
423	validate_config
424	echo "${SD_BORDER}${nl_}"
425	echo -n "Are you happy with these settings? yes/no (no): "
426	read ANSWER
427	if [ x$ANSWER != "xyes" ] ; then
428	echo "${nl_}Fix the configuration options and rerun the script.${nl_}"
429	exit 1
430	fi
431	echo "${nl_}${SD_BORDER}${nl_}"
432
433	# Load additional modules or configuration files based on global settings
434	# compare module
435	if [[ "$COMPARE" = "1" ]]; then
436	[[ $VERBOSITY > 0 ]] && echo -n "Loading compare module..."
437	source $COMMON_DIR/func_compare.sh
438	[[ $? > 0 ]] && echo "$COMMON_DIR/func_compare.sh did not load.." && exit
439	[[ $VERBOSITY > 0 ]] && echo "OK"
440	fi
441	#
442	# optimize module
443	if [[ "$OPTIMIZE" != "0" ]]; then
444	[[ $VERBOSITY > 0 ]] && echo -n "Loading optimization module..."
445	source optimize/optimize_functions
446	[[ $? > 0 ]] && echo " optimize/optimize_functions did not load.." && exit
447	[[ $VERBOSITY > 0 ]] && echo "OK"
448	#
449	# optimize configurations
450	[[ $VERBOSITY > 0 ]] && echo -n "Loading optimization config..."
451	source optimize/opt_config
452	[[ $? > 0 ]] && echo " optimize/opt_config did not load.." && exit
453	[[ $VERBOSITY > 0 ]] && echo "OK"
454	# Validate optimize settings, if required
455	validate_opt_settings
456	fi
457	#
458
459	# If $BUILDDIR has subdirectories like tools/ or bin/, stop the run
460	# and notify the user about that.
461	if [ -d $BUILDDIR/tools -o -d $BUILDDIR/bin ] && [ -z $CLEAN ] ; then
462	eval "$no_empty_builddir"
463	fi
464
465	# If requested, clean the build directory
466	clean_builddir
467
468	if [[ ! -d $JHALFSDIR ]]; then
469	mkdir -p $JHALFSDIR
470	fi
471	#
472	# Create $BUILDDIR/sources even though it could be created by get_sources()
473	if [[ ! -d $BUILDDIR/sources ]]; then
474	mkdir -p $BUILDDIR/sources
475	fi
476	#
477	# Create the log directory
478	if [[ ! -d $LOGDIR ]]; then
479	mkdir $LOGDIR
480	fi
481	>$LOGDIR/$LOG
482	#
483	[[ "$TEST" != "0" ]] && [[ ! -d $TESTLOGDIR ]] && install -d -m 1777 $TESTLOGDIR
484	#
485	if [[ "$PWD" != "$JHALFSDIR" ]]; then
486	cp $COMMON_DIR/{makefile-functions,progress_bar.sh} $JHALFSDIR/
487	#
488	[[ "$OPTIMIZE" != "0" ]] && cp optimize/opt_override $JHALFSDIR/
489	#
490	if [[ "$COMPARE" != "0" ]] ; then
491	mkdir -p $JHALFSDIR/extras
492	cp extras/* $JHALFSDIR/extras
493	fi
494	#
495	if [[ -n "$FILES" ]]; then
496	# pushd/popd necessary to deal with mulitiple files
497	pushd $PACKAGE_DIR 1> /dev/null
498	cp $FILES $JHALFSDIR/
499	popd 1> /dev/null
500	fi
501	#
502	if [[ "$REPORT" = "1" ]]; then
503	cp $COMMON_DIR/create-sbu_du-report.sh $JHALFSDIR/
504	# After be sure that all look sane, dump the settings to a file
505	# This file will be used to create the REPORT header
506	validate_config > $JHALFSDIR/jhalfs.config
507	fi
508	#
509	[[ "$GETPKG" = "1" ]] && cp $COMMON_DIR/urls.xsl $JHALFSDIR/
510	#
511	sed 's,FAKEDIR,'$BOOK',' $PACKAGE_DIR/$XSL > $JHALFSDIR/${XSL}
512	export XSL=$JHALFSDIR/${XSL}
513	fi
514
515	get_book
516	echo "${SD_BORDER}${nl_}"
517
518	build_Makefile
519	echo "${SD_BORDER}${nl_}"
520
521	run_make

Note: See TracBrowser for help on using the repository browser.

Download in other formats: