Context Navigation

source: master.sh@ ef87eed

experimental

Last change on this file since ef87eed was 9485eba, checked in by George Boudreau <georgeb@…>, 18 years ago
Implement suggestion made byDan Nicholson for configurable user/group. Required many changes and allowed for the removal of user specific function calls. Tnx Dan
Property mode set to `100755`
File size: 14.1 KB

Line
1	#!/bin/bash
2	# $Id$
3	set -e
4
5
6	#>>>>>>>>>>>>>>>ERROR TRAPPING >>>>>>>>>>>>>>>>>>>>
7	#-----------------------#
8	simple_error() { # Basic error trap.... JUST DIE
9	#-----------------------#
10	# If +e then disable text output
11	if [[ "$-" =~ "e" ]]; then
12	echo -e "\n${RED}ERROR:${GREEN} basic error trapped!${OFF}\n" >&2
13	fi
14	}
15
16	see_ya() {
17	echo -e "\n\t${BOLD}Goodbye and thank you for choosing ${L_arrow}jhalfs-X${R_arrow}\n"
18	}
19	##### Simple error TRAPS
20	# ctrl-c SIGINT
21	# ctrl-y
22	# ctrl-z SIGTSTP
23	# SIGHUP 1 HANGUP
24	# SIGINT 2 INTRERRUPT FROM KEYBOARD Ctrl-C
25	# SIGQUIT 3
26	# SIGKILL 9 KILL
27	# SIGTERM 15 TERMINATION
28	# SIGSTOP 17,18,23 STOP THE PROCESS
29	#####
30	set -e
31	trap see_ya 0
32	trap simple_error ERR
33	trap 'echo -e "\n\n${RED}INTERRUPT${OFF} trapped\n" && exit 2' 1 2 3 15 17 18 23
34	#>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
35
36
37	if [ ! -L $0 ] ; then
38	echo "${nl_}${tab_}${BOLD}${RED}This script cannot be called directly: EXITING ${OFF}${nl_}"
39	exit 1
40	fi
41
42	PROGNAME=$(basename $0)
43	COMMON_DIR="common"
44	PACKAGE_DIR=$(echo $PROGNAME \| tr [a-z] [A-Z])
45	MODULE=$PACKAGE_DIR/master.sh
46	MODULE_CONFIG=$PACKAGE_DIR/config
47	VERBOSITY=0
48
49	[[ $VERBOSITY > 0 ]] && echo -n "Loading common-functions module..."
50	source $COMMON_DIR/common-functions
51	[[ $? > 0 ]] && echo " $COMMON_DIR/common-functions did not load.." && exit
52	[[ $VERBOSITY > 0 ]] && echo "OK"
53	#
54	[[ $VERBOSITY > 0 ]] && echo -n "Loading masterscript conf..."
55	source $COMMON_DIR/config
56	[[ $? > 0 ]] && echo "$COMMON_DIR/conf did not load.." && exit
57	[[ $VERBOSITY > 0 ]] && echo "OK"
58	#
59	[[ $VERBOSITY > 0 ]] && echo -n "Loading config module <$MODULE_CONFIG>..."
60	source $MODULE_CONFIG
61	[[ $? > 0 ]] && echo "$MODULE_CONFIG did not load.." && exit 1
62	[[ $VERBOSITY > 0 ]] && echo "OK"
63	#
64	[[ $VERBOSITY > 0 ]] && echo -n "Loading code module <$MODULE>..."
65	source $MODULE
66	[[ $? > 0 ]] && echo "$MODULE did not load.." && exit 2
67	[[ $VERBOSITY > 0 ]] && echo "OK"
68	#
69	[[ $VERBOSITY > 0 ]] && echo "${SD_BORDER}${nl_}"
70
71	if [[ -e using_menuconfig ]]; then
72	source configuration
73
74
75	#--- Working directories
76	SCRIPT_ROOT=jhalfs
77	JHALFSDIR=$BUILDDIR/$SCRIPT_ROOT
78	LOGDIR=$JHALFSDIR/logs
79	TESTLOGDIR=$JHALFSDIR/test-logs
80	MKFILE=$JHALFSDIR/Makefile
81	#--- ICA report log directory
82	ICALOGDIR=$LOGDIR/ICA
83	#--- farce report log directory
84	FARCELOGDIR=$LOGDIR/farce
85
86	[[ ! -z ${BRANCH_ID} ]] &&
87	case $BRANCH_ID in
88	dev* \| SVN \| trunk )
89	case $PROGNAME in
90	clfs2 ) TREE=branches/clfs-2.0/BOOK ;;
91	*) TREE=trunk/BOOK ;;
92	esac
93	LFSVRS=development
94	;;
95	branch-* )
96	LFSVRS=${BRANCH_ID}
97	TREE=branches/${BRANCH_ID#branch-}/BOOK
98	;;
99	* )
100	case $PROGNAME in
101	lfs \| hlfs )
102	LFSVRS=${BRANCH_ID}
103	TREE=tags/${BRANCH_ID}/BOOK
104	;;
105	clfs \| clfs2 )
106	LFSVRS=${BRANCH_ID}
107	TREE=tags/${BRANCH_ID}
108	;;
109	esac
110	;;
111	esac
112	fi
113
114	#===========================================================
115	# If the var BOOK contains something then, maybe, it points
116	# to a working doc.. set WC=1, else 'null'
117	#===========================================================
118	WC=${BOOK:+1}
119	#===========================================================
120
121
122	#*******************************************************************#
123	[[ $VERBOSITY > 0 ]] && echo -n "Loading function <func_check_version.sh>..."
124	source $COMMON_DIR/func_check_version.sh
125	[[ $? > 0 ]] && echo " function module did not load.." && exit 2
126	[[ $VERBOSITY > 0 ]] && echo "OK"
127
128	[[ $VERBOSITY > 0 ]] && echo -n "Loading function <func_validate_configs.sh>..."
129	source $COMMON_DIR/func_validate_configs.sh
130	[[ $? > 0 ]] && echo " function module did not load.." && exit 2
131	[[ $VERBOSITY > 0 ]] && echo "OK"
132	[[ $VERBOSITY > 0 ]] && echo "${SD_BORDER}${nl_}"
133
134
135	###################################
136	### MAIN ###
137	###################################
138
139	# Evaluate any command line switches
140
141	while test $# -gt 0 ; do
142	case $1 in
143	# Common options for {C,H}LFS books
144	--book \| -B )
145	test $# = 1 && eval "$exit_missing_arg"
146	shift
147	case $1 in
148	dev* \| SVN \| trunk )
149	LFSVRS=development
150	TREE=trunk/BOOK
151	;;
152	branch-* )
153	LFSVRS=$1
154	TREE=branches/${1#branch-}/BOOK
155	;;
156	* )
157	case $PROGNAME in
158	lfs \| hlfs )
159	LFSVRS=$1
160	TREE=tags/$1/BOOK
161	;;
162	clfs )
163	LFSVRS=$1
164	TREE=tags/$1
165	;;
166	esac
167	;;
168	esac
169	;;
170
171	--directory \| -D )
172	test $# = 1 && eval "$exit_missing_arg"
173	shift
174	case $1 in
175	-* )
176	echo -e "\n$1 isn't a valid build directory."
177	echo -e "Directory names can't start with - .\n"
178	exit 1
179	;;
180	* )
181	BUILDDIR=$1
182	JHALFSDIR=$BUILDDIR/${SCRIPT_ROOT}
183	LOGDIR=$JHALFSDIR/logs
184	TESTLOGDIR=$JHALFSDIR/test-logs
185	MKFILE=$JHALFSDIR/Makefile
186	;;
187	esac
188	;;
189
190	--get-packages \| -G ) GETPKG=1 ;;
191
192	--help \| -h ) usage \| more && exit ;;
193
194	--optimize \| -O )
195	test $# = 1 && eval "$exit_missing_arg"
196	shift
197	case $1 in
198	0 \| 1 \| 2 )
199	OPTIMIZE=$1
200	;;
201	* )
202	echo -e "\n$1 isn't a valid optimize level value."
203	echo -e "You must use 0, 1, or 2.\n"
204	exit 1
205	;;
206	esac
207	;;
208
209	--testsuites \| -T )
210	test $# = 1 && eval "$exit_missing_arg"
211	shift
212	case $1 in
213	0 \| 1 \| 2 \| 3 )
214	TEST=$1
215	;;
216	* )
217	echo -e "\n$1 isn't a valid testsuites level value."
218	echo -e "You must to use 0, 1, 2, or 3.\n"
219	exit 1
220	;;
221	esac
222	;;
223
224	--version \| -V )
225	echo "$version"
226	exit 0
227	;;
228
229	--working-copy \| -W )
230	test $# = 1 && eval "$exit_missing_arg"
231	shift
232	case $PROGNAME in # Poor checks. We should find better ones.
233	lfs)
234	if [ -d $1/chapter09 ] ; then
235	WC=1
236	BOOK=$1
237	else
238	echo -e "\nLooks like $1 isn't an LFS working copy."
239	exit 1
240	fi
241	;;
242	clfs)
243	if [ -d $1/cross-tools ] ; then
244	WC=1
245	BOOK=$1
246	else
247	echo -e "\nLooks like $1 isn't a CLFS working copy."
248	exit 1
249	fi
250	;;
251	hlfs)
252	if [ -f $1/template.xml ] ; then
253	WC=1
254	BOOK=$1
255	else
256	echo -e "\nLooks like $1 isn't an HLFS working copy."
257	exit 1
258	fi
259	;;
260	esac
261	;;
262
263	--comparison \| -C )
264	test $# = 1 && eval "$exit_missing_arg"
265	shift
266	case $1 in
267	ICA) RUN_ICA=1
268	RUN_FARCE=0
269	COMPARE=1
270	;;
271	farce) RUN_ICA=0
272	RUN_FARCE=1
273	COMPARE=1
274	;;
275	both) RUN_ICA=1
276	RUN_FARCE=1
277	COMPARE=1
278	;;
279	*)
280	echo -e "\n$1 is an unknown analysis method."
281	exit 1
282	;;
283	esac
284	;;
285
286	--fstab \| -F )
287	test $# = 1 && eval "$exit_missing_arg"
288	shift
289	if [ -f $1 ] ; then
290	FSTAB=$1
291	else
292	echo -e "\nFile $1 not found. Verify your command line.\n"
293	exit 1
294	fi
295	;;
296
297	--kernel-config \| -K )
298	test $# = 1 && eval "$exit_missing_arg"
299	shift
300	if [ -f $1 ] ; then
301	CONFIG=$1
302	else
303	echo -e "\nFile $1 not found. Verify your command line.\n"
304	exit 1
305	fi
306	;;
307
308	--run-make \| -M ) RUNMAKE=1 ;;
309
310	--rebuild \| -R ) CLEAN=1 ;;
311
312	# CLFS options
313	--arch \| -A )
314	test $# = 1 && eval "$exit_missing_arg"
315	shift
316	case $1 in
317	arm )
318	ARCH=arm
319	TARGET="arm-unknown-linux-gnu"
320	;;
321	x86 )
322	ARCH=x86
323	TARGET="i686-pc-linux-gnu"
324	;;
325	i486 )
326	ARCH=x86
327	TARGET="i486-pc-linux-gnu"
328	;;
329	i586 )
330	ARCH=x86
331	TARGET="i586-pc-linux-gnu"
332	;;
333	ppc )
334	ARCH=ppc
335	TARGET="powerpc-unknown-linux-gnu"
336	;;
337	mips )
338	ARCH=mips
339	TARGET="mips-unknown-linux-gnu"
340	;;
341	mipsel )
342	ARCH=mips
343	TARGET="mipsel-unknown-linux-gnu"
344	;;
345	sparc )
346	ARCH=sparc
347	TARGET="sparcv9-unknown-linux-gnu"
348	;;
349	x86_64-64 )
350	ARCH=x86_64-64
351	TARGET="x86_64-unknown-linux-gnu"
352	;;
353	mips64-64 )
354	ARCH=mips64-64
355	TARGET="mips-unknown-linux-gnu"
356	;;
357	mipsel64-64 )
358	ARCH=mips64-64
359	TARGET="mipsel-unknown-linux-gnu"
360	;;
361	sparc64-64 )
362	ARCH=sparc64-64
363	TARGET="sparc64-unknown-linux-gnu"
364	;;
365	alpha )
366	ARCH=alpha
367	TARGET="alpha-unknown-linux-gnu"
368	;;
369	x86_64 )
370	ARCH=x86_64
371	TARGET="x86_64-unknown-linux-gnu"
372	TARGET32="i686-pc-linux-gnu"
373	;;
374	mips64 )
375	ARCH=mips64
376	TARGET="mips-unknown-linux-gnu"
377	TARGET32="mips-unknown-linux-gnu"
378	;;
379	mipsel64 )
380	ARCH=mips64
381	TARGET="mipsel-unknown-linux-gnu"
382	TARGET32="mipsel-unknown-linux-gnu"
383	;;
384	sparc64 )
385	ARCH=sparc64
386	TARGET="sparc64-unknown-linux-gnu"
387	TARGET32="sparcv9-unknown-linux-gnu"
388	;;
389	ppc64 )
390	ARCH=ppc64
391	TARGET="powerpc64-unknown-linux-gnu"
392	TARGET32="powerpc-unknown-linux-gnu"
393	;;
394	* )
395	echo -e "\n$1 is an unknown or unsupported arch."
396	exit 1
397	;;
398	esac
399	;;
400
401	--boot-config )
402	test $# = 1 && eval "$exit_missing_arg"
403	shift
404	if [ -f $1 ] ; then
405	BOOT_CONFIG=$1
406	else
407	echo -e "\nFile $1 not found. Verify your command line.\n"
408	exit 1
409	fi
410	;;
411
412	--method )
413	test $# = 1 && eval "$exit_missing_arg"
414	shift
415	case $1 in
416	chroot \| boot )
417	METHOD=$1
418	;;
419	* )
420	echo -e "\n$1 isn't a valid build method."
421	exit 1
422	;;
423	esac
424	;;
425
426	# HLFS options
427	--model )
428	test $# = 1 && eval "$exit_missing_arg"
429	shift
430	case $1 in
431	glibc \| uclibc )
432	MODEL=$1
433	;;
434	* )
435	echo -e "\n$1 isn't a valid libc model."
436	exit 1
437	;;
438	esac
439	;;
440
441	# Unknown options
442	* ) usage ;;
443	esac
444	shift
445	done
446
447	#===================================================
448	# Set the document location...
449	# BOOK is either defined in
450	# xxx.config
451	# comand line
452	# default
453	# If set by conf file or cmd line leave it
454	# alone otherwise load the default version
455	#===================================================
456	BOOK=${BOOK:=$PROGNAME-$LFSVRS}
457	#===================================================
458
459
460	# Check for minimum gcc and kernel versions
461	#check_requirements 1 # 0/1 0-do not display values.
462	echo
463	check_version "2.6.2" "`uname -r`" "KERNEL"
464	check_version "3.0" "$BASH_VERSION" "BASH"
465	check_version "3.0" "`gcc -dumpversion`" "GCC"
466	tarVer=`tar --version \| head -n1 \| cut -d " " -f4`
467	check_version "1.15.0" "${tarVer}" "TAR"
468	echo "${SD_BORDER}${nl_}"
469
470	validate_config
471	echo "${SD_BORDER}${nl_}"
472	echo -n "Are you happy with these settings? yes/no (no): "
473	read ANSWER
474	if [ x$ANSWER != "xyes" ] ; then
475	echo "${nl_}Fix the configuration options and rerun the script.${nl_}"
476	exit 1
477	fi
478	echo "${nl_}${SD_BORDER}${nl_}"
479
480	# Load additional modules or configuration files based on global settings
481	# compare module
482	if [[ "$COMPARE" = "1" ]]; then
483	[[ $VERBOSITY > 0 ]] && echo -n "Loading compare module..."
484	source $COMMON_DIR/func_compare.sh
485	[[ $? > 0 ]] && echo "$COMMON_DIR/func_compare.sh did not load.." && exit
486	[[ $VERBOSITY > 0 ]] && echo "OK"
487	fi
488	#
489	# optimize module
490	if [[ "$OPTIMIZE" != "0" ]]; then
491	[[ $VERBOSITY > 0 ]] && echo -n "Loading optimization module..."
492	source optimize/optimize_functions
493	[[ $? > 0 ]] && echo " optimize/optimize_functions did not load.." && exit
494	[[ $VERBOSITY > 0 ]] && echo "OK"
495	#
496	# optimize configurations
497	[[ $VERBOSITY > 0 ]] && echo -n "Loading optimization config..."
498	source optimize/opt_config
499	[[ $? > 0 ]] && echo " optimize/opt_config did not load.." && exit
500	[[ $VERBOSITY > 0 ]] && echo "OK"
501	# Validate optimize settings, if required
502	validate_opt_settings
503	fi
504	#
505
506	# If $BUILDDIR has subdirectories like tools/ or bin/, stop the run
507	# and notify the user about that.
508	if [ -d $BUILDDIR/tools -o -d $BUILDDIR/bin ] && [ -z $CLEAN ] ; then
509	eval "$no_empty_builddir"
510	fi
511
512	# If requested, clean the build directory
513	clean_builddir
514
515	if [[ ! -d $JHALFSDIR ]]; then
516	mkdir -p $JHALFSDIR
517	fi
518	#
519	# Create $BUILDDIR/sources even though it could be created by get_sources()
520	if [[ ! -d $BUILDDIR/sources ]]; then
521	mkdir -p $BUILDDIR/sources
522	fi
523	#
524	# Create the log directory
525	if [[ ! -d $LOGDIR ]]; then
526	mkdir $LOGDIR
527	fi
528	>$LOGDIR/$LOG
529	#
530	[[ "$TEST" != "0" ]] && [[ ! -d $TESTLOGDIR ]] && install -d -m 1777 $TESTLOGDIR
531	#
532	if [[ "$PWD" != "$JHALFSDIR" ]]; then
533	cp $COMMON_DIR/{makefile-functions,progress_bar.sh} $JHALFSDIR/
534	#
535	[[ "$OPTIMIZE" != "0" ]] && cp optimize/opt_override $JHALFSDIR/
536	#
537	if [[ "$COMPARE" != "0" ]] ; then
538	mkdir -p $JHALFSDIR/extras
539	cp extras/* $JHALFSDIR/extras
540	fi
541	#
542	if [[ -n "$FILES" ]]; then
543	# pushd/popd necessary to deal with multiple files
544	pushd $PACKAGE_DIR 1> /dev/null
545	cp $FILES $JHALFSDIR/
546	popd 1> /dev/null
547	fi
548	#
549	if [[ "$REPORT" = "1" ]]; then
550	cp $COMMON_DIR/create-sbu_du-report.sh $JHALFSDIR/
551	# After being sure that all looks sane, dump the settings to a file
552	# This file will be used to create the REPORT header
553	validate_config > $JHALFSDIR/jhalfs.config
554	fi
555	#
556	[[ "$GETPKG" = "1" ]] && cp $COMMON_DIR/urls.xsl $JHALFSDIR/
557	#
558	cp $COMMON_DIR/packages.xsl $JHALFSDIR/
559	#
560	sed 's,FAKEDIR,'$BOOK',' $PACKAGE_DIR/$XSL > $JHALFSDIR/${XSL}
561	export XSL=$JHALFSDIR/${XSL}
562	fi
563
564	get_book
565	echo "${SD_BORDER}${nl_}"
566
567	build_Makefile
568	echo "${SD_BORDER}${nl_}"
569
570	run_make

Note: See TracBrowser for help on using the repository browser.

Download in other formats: