source: master.sh@ fed9756

experimental
Last change on this file since fed9756 was fed9756, checked in by Manuel Canales Esparcia <manuel@…>, 19 years ago

Merged r2481:2485 from trunk.

  • Property mode set to 100755
File size: 11.6 KB
Line 
1#!/bin/bash
2# $Id$
3set -e
4
5
6#>>>>>>>>>>>>>>>ERROR TRAPPING >>>>>>>>>>>>>>>>>>>>
7#-----------------------#
8simple_error() { # Basic error trap.... JUST DIE
9#-----------------------#
10 # If +e then disable text output
11 if [[ "$-" =~ "e" ]]; then
12 echo -e "\n${RED}ERROR:${GREEN} basic error trapped!${OFF}\n" >&2
13 fi
14}
15
16see_ya() {
17 echo -e "\n\t${BOLD}Goodbye and thank you for choosing ${L_arrow}jhalfs-X${R_arrow}\n"
18}
19##### Simple error TRAPS
20# ctrl-c SIGINT
21# ctrl-y
22# ctrl-z SIGTSTP
23# SIGHUP 1 HANGUP
24# SIGINT 2 INTRERRUPT FROM KEYBOARD Ctrl-C
25# SIGQUIT 3
26# SIGKILL 9 KILL
27# SIGTERM 15 TERMINATION
28# SIGSTOP 17,18,23 STOP THE PROCESS
29#####
30set -e
31trap see_ya 0
32trap simple_error ERR
33trap 'echo -e "\n\n${RED}INTERRUPT${OFF} trapped\n" && exit 2' 1 2 3 15 17 18 23
34#>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
35
36
37if [ ! -L $0 ] ; then
38 echo "${nl_}${tab_}${BOLD}${RED}This script cannot be called directly: EXITING ${OFF}${nl_}"
39 exit 1
40fi
41
42 PROGNAME=$(basename $0)
43 COMMON_DIR="common"
44 PACKAGE_DIR=$(echo $PROGNAME | tr [a-z] [A-Z])
45 MODULE=$PACKAGE_DIR/master.sh
46MODULE_CONFIG=$PACKAGE_DIR/config
47 VERBOSITY=0
48
49[[ $VERBOSITY > 0 ]] && echo -n "Loading common-functions module..."
50source $COMMON_DIR/common-functions
51[[ $? > 0 ]] && echo " $COMMON_DIR/common-functions did not load.." && exit
52[[ $VERBOSITY > 0 ]] && echo "OK"
53#
54
55[[ $VERBOSITY > 0 ]] && echo -n "Loading masterscript conf..."
56source $COMMON_DIR/config
57[[ $? > 0 ]] && echo "$COMMON_DIR/conf did not load.." && exit
58[[ $VERBOSITY > 0 ]] && echo "OK"
59#
60[[ $VERBOSITY > 0 ]] && echo -n "Loading config module <$MODULE_CONFIG>..."
61source $MODULE_CONFIG
62[[ $? > 0 ]] && echo "$MODULE_CONFIG did not load.." && exit 1
63[[ $VERBOSITY > 0 ]] && echo "OK"
64#
65[[ $VERBOSITY > 0 ]] && echo -n "Loading code module <$MODULE>..."
66source $MODULE
67[[ $? > 0 ]] && echo "$MODULE did not load.." && exit 2
68[[ $VERBOSITY > 0 ]] && echo "OK"
69#
70[[ $VERBOSITY > 0 ]] && echo "---------------${nl_}"
71
72
73#===========================================================
74# If the var BOOK contains something then, maybe, it points
75# to a working doc.. set WC=1, else 'null'
76#===========================================================
77WC=${BOOK:+1}
78#===========================================================
79
80
81#*******************************************************************#
82[[ $VERBOSITY > 0 ]] && echo -n "Loading function <func_check_version.sh>..."
83source $COMMON_DIR/func_check_version.sh
84[[ $? > 0 ]] && echo " function module did not load.." && exit 2
85[[ $VERBOSITY > 0 ]] && echo "OK"
86
87[[ $VERBOSITY > 0 ]] && echo -n "Loading function <func_validate_configs.sh>..."
88source $COMMON_DIR/func_validate_configs.sh
89[[ $? > 0 ]] && echo " function module did not load.." && exit 2
90[[ $VERBOSITY > 0 ]] && echo "OK"
91[[ $VERBOSITY > 0 ]] && echo "---------------${nl_}"
92
93
94###################################
95### MAIN ###
96###################################
97
98# Evaluate any command line switches
99
100while test $# -gt 0 ; do
101 case $1 in
102 # Common options for all books
103 --book | -B )
104 test $# = 1 && eval "$exit_missing_arg"
105 shift
106 case $1 in
107 dev* | SVN | trunk )
108 LFSVRS=development
109 ;;
110 *) if [[ "$PROGNAME" = "lfs" ]]; then
111 case $1 in
112 6.1.1 )
113 echo "For stable 6.1.1 book, please use jhalfs-0.2."
114 exit 0
115 ;;
116 udev*) LFSVRS=udev_update ;;
117 * ) echo "$1 is an unsupported version at this time." ;;
118 esac
119 else
120 echo "The requested version, ${L_arrow} ${BOLD}$1${OFF} ${R_arrow}, is undefined in the ${BOLD}$(echo $PROGNAME | tr [a-z] [A-Z])${OFF} series."
121 exit 0
122 fi
123 ;;
124 esac
125 ;;
126
127 --directory | -D )
128 test $# = 1 && eval "$exit_missing_arg"
129 shift
130 case $1 in
131 -* )
132 echo -e "\n$1 isn't a valid build directory."
133 echo -e "Directory names can't start with - .\n"
134 exit 1
135 ;;
136 * )
137 BUILDDIR=$1
138 JHALFSDIR=$BUILDDIR/jhalfs
139 LOGDIR=$JHALFSDIR/logs
140 MKFILE=$JHALFSDIR/Makefile
141 ;;
142 esac
143 ;;
144
145 --get-packages | -G ) HPKG=1 ;;
146
147 --help | -h ) usage | more && exit ;;
148
149 --testsuites | -T )
150 test $# = 1 && eval "$exit_missing_arg"
151 shift
152 case $1 in
153 0 | 1 | 2 | 3 )
154 TEST=$1
155 ;;
156 * )
157 echo -e "\n$1 isn't a valid testsuites level value."
158 echo -e "You must to use 0, 1, 2, or 3.\n"
159 exit 1
160 ;;
161 esac
162 ;;
163
164 --version | -V )
165 echo "$version"
166 exit 0
167 ;;
168
169 --working-copy | -W )
170 test $# = 1 && eval "$exit_missing_arg"
171 shift
172 case $PROGNAME in # Poor checks. We should find better ones.
173 lfs)
174 if [ -f $1/patches.ent ] ; then
175 WC=1
176 BOOK=$1
177 else
178 echo -e "\nLooks like $1 isn't a LFS working copy."
179 exit 1
180 fi
181 ;;
182 clfs)
183 if [ -f $1/patches.ent ] && [ -f $1/packages.ent ]; then
184 WC=1
185 BOOK=$1
186 else
187 echo -e "\nLooks like $1 isn't a CLFS working copy."
188 exit 1
189 fi
190 ;;
191 hlfs)
192 if [ -f $1/template.xml ] ; then
193 WC=1
194 BOOK=$1
195 else
196 echo -e "\nLooks like $1 isn't a HLFS working copy."
197 exit 1
198 fi
199 ;;
200 blfs)
201 if [ -f $1/use-unzip.xml ] ; then
202 WC=1
203 BOOK=$1
204 else
205 echo -e "\nLooks like $1 isn't a BLFS working copy."
206 exit 1
207 fi
208 ;;
209 esac
210 ;;
211
212 # Common options for LFS, CLFS and HLFS
213 --fstab | -F )
214 test $# = 1 && eval "$exit_missing_arg"
215 shift
216 if [ -f $1 ] ; then
217 FSTAB=$1
218 else
219 echo -e "\nFile $1 not found. Verify your command line.\n"
220 exit 1
221 fi
222 ;;
223
224 --kernel-config | -K )
225 test $# = 1 && eval "$exit_missing_arg"
226 shift
227 if [ -f $1 ] ; then
228 CONFIG=$1
229 else
230 echo -e "\nFile $1 not found. Verify your command line.\n"
231 exit 1
232 fi
233 ;;
234
235 --make | -M ) RUNMAKE=1 ;;
236
237 --rebuild | -R ) CLEAN=1 ;;
238
239 # CLFS options
240 --arch | -A )
241 test $# = 1 && eval "$exit_missing_arg"
242 shift
243 case $1 in
244 x86 )
245 ARCH=x86
246 TARGET="i686-pc-linux-gnu"
247 ;;
248 i486 )
249 ARCH=x86
250 TARGET="i486-pc-linux-gnu"
251 ;;
252 i586 )
253 ARCH=x86
254 TARGET="i586-pc-linux-gnu"
255 ;;
256 ppc )
257 ARCH=ppc
258 TARGET="powerpc-unknown-linux-gnu"
259 ;;
260 mips )
261 ARCH=mips
262 TARGET="mips-unknown-linux-gnu"
263 ;;
264 mipsel )
265 ARCH=mips
266 TARGET="mipsel-unknown-linux-gnu"
267 ;;
268 sparc )
269 ARCH=sparc
270 TARGET="sparcv9-unknown-linux-gnu"
271 ;;
272 sparcv8 )
273 ARCH=sparcv8
274 TARGET="sparc-unknown-linux-gnu"
275 ;;
276 x86_64-64 )
277 ARCH=x86_64-64
278 TARGET="x86_64-unknown-linux-gnu"
279 ;;
280 mips64-64 )
281 ARCH=mips64-64
282 TARGET="mips-unknown-linux-gnu"
283 ;;
284 mipsel64-64 )
285 ARCH=mips64-64
286 TARGET="mipsel-unknown-linux-gnu"
287 ;;
288 sparc64-64 )
289 ARCH=sparc64-64
290 TARGET="sparc64-unknown-linux-gnu"
291 ;;
292 alpha )
293 ARCH=alpha
294 TARGET="alpha-unknown-linux-gnu"
295 ;;
296 x86_64 )
297 ARCH=x86_64
298 TARGET="x86_64-unknown-linux-gnu"
299 TARGET32="i686-pc-linux-gnu"
300 ;;
301 mips64 )
302 ARCH=mips64
303 TARGET="mips-unknown-linux-gnu"
304 TARGET32="mips-unknown-linux-gnu"
305 ;;
306 mipsel64 )
307 ARCH=mips64
308 TARGET="mipsel-unknown-linux-gnu"
309 TARGET32="mipsel-unknown-linux-gnu"
310 ;;
311 sparc64 )
312 ARCH=sparc64
313 TARGET="sparc64-unknown-linux-gnu"
314 TARGET32="sparcv9-unknown-linux-gnu"
315 ;;
316 ppc64 )
317 ARCH=ppc64
318 TARGET="powerpc64-unknown-linux-gnu"
319 TARGET32="powerpc-unknown-linux-gnu"
320 ;;
321 * )
322 echo -e "\n$1 is an unknown or unsopported arch."
323 exit 1
324 ;;
325 esac
326 ;;
327
328 --boot-config )
329 test $# = 1 && eval "$exit_missing_arg"
330 shift
331 if [ -f $1 ] ; then
332 BOOT_CONFIG=$1
333 else
334 echo -e "\nFile $1 not found. Verify your command line.\n"
335 exit 1
336 fi
337 ;;
338
339 --method )
340 test $# = 1 && eval "$exit_missing_arg"
341 shift
342 case $1 in
343 chroot | boot )
344 METHOD=$1
345 ;;
346 * )
347 echo -e "\n$1 isn't a valid build method."
348 exit 1
349 ;;
350 esac
351 ;;
352
353 # HLFS options
354 --model )
355 test $# = 1 && eval "$exit_missing_arg"
356 shift
357 case $1 in
358 glibc | uclibc )
359 MODEL=$1
360 ;;
361 * )
362 echo -e "\n$1 isn't a valid libc model."
363 exit 1
364 ;;
365 esac
366 ;;
367
368 # BLFS options
369 --dependencies )
370 test $# = 1 && eval "$exit_missing_arg"
371 shift
372 case $1 in
373 0 | 1 | 2 )
374 DEPEND=$1
375 ;;
376 * )
377 echo -e "\n$1 isn't a valid dependencies level."
378 exit 1
379 ;;
380 esac
381 ;;
382
383 # Unknown options
384 * ) usage ;;
385 esac
386 shift
387done
388
389# Find the download client to use, if not already specified.
390
391if [ -z $DL ] ; then
392 if [ `type -p wget` ] ; then
393 DL=wget
394 elif [ `type -p curl` ] ; then
395 DL=curl
396 else
397 eval "$no_dl_client"
398 fi
399fi
400
401#===================================================
402# Set the document location...
403# BOOK is either defined in
404# xxx.config
405# comand line
406# default
407# If set by conf file or cmd line leave it
408# alone otherwise load the default version
409#===================================================
410BOOK=${BOOK:=$PROGNAME-$LFSVRS}
411#===================================================
412
413
414# Check for minumum gcc and kernel versions
415#check_requirements 1 # 0/1 0-do not display values.
416echo
417check_version "2.6.2" "`uname -r`" "KERNEL"
418check_version "3.0" "$BASH_VERSION" "BASH"
419check_version "3.0" "`gcc -dumpversion`" "GCC"
420tarVer=`tar --version`
421check_version "1.15.0" "${tarVer##* }" "TAR"
422echo "---------------${nl_}"
423
424validate_config
425echo "---------------${nl_}"
426
427echo -n "Are you happy with these settings? yes/no (no): "
428read ANSWER
429if [ x$ANSWER != "xyes" ] ; then
430 echo "${nl_}Fix the configuration options and rerun the script.${nl_}"
431 exit 1
432fi
433echo "${nl_}---------------${nl_}"
434
435# Prevents setting "-d /" by mistake.
436
437if [ $BUILDDIR = / ] ; then
438 echo -ne "\nThe root directory can't be used to build LFS.\n\n"
439 exit 1
440fi
441
442# If $BUILDDIR has subdirectories like tools/ or bin/, stop the run
443# and notify the user about that.
444
445if [ -d $BUILDDIR/tools -o -d $BUILDDIR/bin ] && [ -z $CLEAN ] ; then
446 eval "$no_empty_builddir"
447fi
448
449# If requested, clean the build directory
450clean_builddir
451
452if [[ ! -d $JHALFSDIR ]]; then
453 mkdir -p $JHALFSDIR
454fi
455
456if [[ "$PWD" != "$JHALFSDIR" ]]; then
457 cp $COMMON_DIR/makefile-functions $JHALFSDIR/
458 if [[ -n "$FILES" ]]; then
459 # pushd/popd necessary to deal with mulitiple files
460 pushd $PACKAGE_DIR 1> /dev/null
461 cp $FILES $JHALFSDIR/
462 popd 1> /dev/null
463 fi
464 sed 's,FAKEDIR,'$BOOK',' $PACKAGE_DIR/$XSL > $JHALFSDIR/${XSL}
465 export XSL=$JHALFSDIR/${XSL}
466fi
467
468if [[ ! -d $LOGDIR ]]; then
469 mkdir $LOGDIR
470fi
471>$LOGDIR/$LOG
472
473get_book
474echo "---------------${nl_}"
475
476build_Makefile
477echo "---------------${nl_}"
478
479run_make
480
Note: See TracBrowser for help on using the repository browser.