source: pkgmngt/packageManager.xml.pacman@ 8b85dae

ablfs-more legacy trunk
Last change on this file since 8b85dae was 3484658, checked in by Pierre Labastie <pierre@…>, 4 years ago

Various fixes for recent pacman with new book

  • add createfiles instructions of packageManager.xml for new book too
  • remove unneeded chown when installing pacman (not needed thanks to the above)
  • Use a dedicated user "builder" for running makepkg: user "tester" is removed at the end of chapter 8, but is needed in following chapters.
  • Property mode set to 100644
File size: 22.1 KB
Line 
1<?xml version="1.0" encoding="UTF-8"?>
2<!-- Above is a mandatory header for xml files. It must be the first
3line in the file. Change encoding to the one you use on your computer -->
4<!-- $Id$ -->
5<!-- Mandatory DOCTYPE declaration. Fill free to add entities,
6but no external entities in local files, since they would not
7be accessible from JHALFSDIR. Change the document type `article' to
8book if you prefer. That slightly changes the aspect if you render
9it in html -->
10<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
11 "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
12<!ENTITY libarchive-version "3.4.3">
13<!ENTITY curl-version "7.71.1">
14<!ENTITY fakeroot-version "1.24">
15<!ENTITY pacman-version "5.2.2">
16<!ENTITY libarchive-url "https://github.com/libarchive/libarchive/releases/download/v&libarchive-version;/libarchive-&libarchive-version;.tar.xz">
17<!ENTITY curl-url "https://curl.haxx.se/download/curl-&curl-version;.tar.xz">
18<!ENTITY fakeroot-url "http://deb.debian.org/debian/pool/main/f/fakeroot/fakeroot_&fakeroot-version;.orig.tar.gz">
19<!ENTITY pacman-url "https://sources.archlinux.org/other/pacman/pacman-&pacman-version;.tar.gz">
20<!ENTITY curl-md5 "b54b386057846ce3edd3584b19741569">
21<!ENTITY libarchive-md5 "4b216ea3015ecf8ae555a2026f9a6b73">
22<!ENTITY fakeroot-md5 "964e5f438f1951e5a515dd54edd50fa6">
23<!ENTITY pacman-md5 "3a9b078a83996a3272844807b91959c6">
24<!ENTITY % general-entities SYSTEM "BOOK/general.ent">
25%general-entities;
26]>
27
28
29<!-- The first markup should be the one defined in the DOCTYPE DECLARATION -->
30<article>
31
32<!-- First section for the tarball download address.
33Only the next four lines are mandatory, but you can add anything
34to make the text look more like the LFS book.
35Do not change anything, except the url and the md5 checksum. -->
36<sect1 id="package">
37 <?dbhtml filename="package.html"?>
38
39 <title>All Packages</title>
40 <para>Download: <ulink url="&curl-url;"/></para>
41 <para>MD5 sum: <literal>&curl-md5;</literal></para>
42 <para>Download: <ulink url="&fakeroot-url;"/></para>
43 <para>MD5 sum: <literal>&fakeroot-md5;</literal></para>
44 <para>Download: <ulink url="&libarchive-url;"/></para>
45 <para>MD5 sum: <literal>&libarchive-md5;</literal></para>
46 <para>Download: <ulink url="&pacman-url;"/></para>
47 <para>MD5 sum: <literal>&pacman-md5;</literal></para>
48</sect1>
49
50<!-- If needed, uncomment and edit this:
51<sect1 id="patches">
52 <para>Download: <ulink url="somepatch-url"/></para>
53 <para>MD5 sum: <literal>somepatch-md5</literal></para>
54</sect1>
55-->
56
57<!-- Do not change the next line. The name of the scriptlet will be taken
58from the dbhtml instruction: it is the name of the file less .html, with
59xxx-x-added before (x, digits).-->
60<sect1 id="ch-tools-libarchive" role="wrap">
61 <?dbhtml filename="libarchive.html"?>
62
63 <sect1info condition="script">
64 <productname>libarchive</productname>
65 <productnumber>&libarchive-version;</productnumber>
66 <address>&libarchive-url;</address>
67 </sect1info>
68
69 <title>Libarchive-&libarchive-version;</title>
70
71 <sect2 role="installation">
72 <title/>
73<screen><userinput remap="configure">./configure --prefix=/tools \
74 --without-bz2lib \
75 --without-xml2 \
76 --enable-bsdtar=static \
77 --enable-bsdcpio=static</userinput></screen>
78<screen><userinput remap="make">make</userinput></screen>
79<screen><userinput remap="install">make install</userinput></screen>
80 </sect2>
81
82</sect1>
83
84<sect1 id="ch-tools-openssl" role="wrap">
85 <?dbhtml filename="openssl.html"?>
86
87 <sect1info condition="script">
88 <productname>openssl</productname>
89 <productnumber>&openssl-version;</productnumber>
90 <address>&openssl-url;</address>
91 </sect1info>
92
93 <title>openssl-&openssl-version;</title>
94
95 <sect2 role="installation">
96 <title/>
97<screen><userinput remap="configure">./config --prefix=/tools \
98 --openssldir=/tools/etc/ssl \
99 --libdir=lib</userinput></screen>
100<screen><userinput remap="make">make</userinput></screen>
101<screen><userinput remap="install">make install</userinput></screen>
102 </sect2>
103
104</sect1>
105
106<sect1 id="ch-tools-curl" role="wrap">
107 <?dbhtml filename="curl.html"?>
108
109 <sect1info condition="script">
110 <productname>curl</productname>
111 <productnumber>&curl-version;</productnumber>
112 <address>&curl-url;</address>
113 </sect1info>
114
115 <title>Curl-&curl-version;</title>
116
117 <sect2 role="installation">
118 <title/>
119<screen><userinput remap="configure">./configure --prefix=/tools \
120 --disable-static</userinput></screen>
121<screen><userinput remap="make">make</userinput></screen>
122<screen><userinput remap="install">make install</userinput></screen>
123 </sect2>
124
125</sect1>
126
127<sect1 id="ch-tools-libcap" role="wrap">
128 <?dbhtml filename="libcap.html"?>
129
130 <sect1info condition="script">
131 <productname>libcap</productname>
132 <productnumber>&libcap-version;</productnumber>
133 <address>&libcap-url;</address>
134 </sect1info>
135
136 <title>libcap-&libcap-version;</title>
137
138 <sect2 role="installation">
139 <title/>
140<screen><userinput remap="make">make lib=lib prefix=/tools GOLANG=no PAM_CAP=no</userinput></screen>
141<screen><userinput remap="install">make lib=lib prefix=/tools GOLANG=no PAM_CAP=no install</userinput></screen>
142 </sect2>
143
144</sect1>
145
146<sect1 id="ch-tools-fakeroot" role="wrap">
147 <?dbhtml filename="fakeroot.html"?>
148
149 <sect1info condition="script">
150 <productname>fakeroot</productname>
151 <productnumber>&fakeroot-version;</productnumber>
152 <address>&fakeroot-url;</address>
153 </sect1info>
154
155 <title>fakeroot-&fakeroot-version;</title>
156
157 <sect2 role="installation">
158 <title/>
159<screen><userinput remap="configure">./configure --prefix=/tools</userinput></screen>
160<screen><userinput remap="make">make</userinput></screen>
161<screen><userinput remap="install">make install</userinput></screen>
162 </sect2>
163
164</sect1>
165
166<sect1 id="ch-tools-pkgmngt" role="wrap">
167 <?dbhtml filename="pacman.html"?>
168
169 <sect1info condition="script">
170 <productname>pacman</productname>
171 <productnumber>&pacman-version;</productnumber>
172 <address>&pacman-url;</address>
173 </sect1info>
174
175 <title>Pacman-&pacman-version;</title>
176
177 <sect2 role="installation">
178 <title/>
179<!-- You can use any number of remap="pre", "configure", "make", "test", "install"
180<screen><userinput remap="something">Instructions</userinput></screen>.
181They are executed in that order. "pre" can be used for patching for example.
182In case testing is enabled, the instructions flagged test are logged to a different
183file (test-log). If testing is not enabled, they are not executed at all. Do not
184put line breaks before and after your instructions. <userinput> without
185remap attribute are considered configuration instructions and executed last. You
186can also use remap="adjust" for the same purpose. -->
187<screen><userinput remap="configure">mkdir build
188cd build
189meson --prefix=/tools \
190 --sysconfdir=/tools/etc \
191 --localstatedir=/tools/var \
192 -Dcrypto=openssl \
193 -Ddoc=disabled \
194 -Dgpgme=disabled \
195 -Dpkg_config_path=/tools/lib/pkgconfig</userinput></screen>
196
197<screen><userinput remap="make">ninja</userinput></screen>
198
199<screen><userinput remap="install">ninja install</userinput></screen>
200
201<screen><userinput>sed -e 's@/usr@/tools@g' \
202 -e 's/\([^!]\)strip/\1!strip/' \
203 -e 's/\([^!]\)libtool/\1!libtool/' \
204 -e 's/\([^!]\)zipman/\1!zipman/' \
205 -i /tools/etc/makepkg.conf
206cat &gt;&gt; /tools/etc/makepkg.conf &lt;&lt; EOF
207BUILDDIR=/sources
208PKGDEST=/var/lib/packages
209PACKAGER="Pierre Labastie &lt;lnimbus@club-internet.fr&gt;"
210EOF
211cat &gt;&gt; /tools/etc/pacman.conf &lt;&lt; EOF
212DBPath = /var/lib/pacman/
213CacheDir = /var/cache/pacman/pkg/
214LogFile = /var/log/pacman.log
215SigLevel = Never
216# Repository: do not add one now: repo-add needs openssl.
217EOF</userinput></screen>
218
219 </sect2>
220
221</sect1>
222
223<!-- version for new book: needs ninja and meson, which needs
224 Python rebuilt with libffi and zlib. Needs also pkg-config -->
225<sect1 id="ch-chroot-libarchive" role="wrap">
226 <?dbhtml filename="libarchive.html"?>
227
228 <sect1info condition="script">
229 <productname>libarchive</productname>
230 <productnumber>&libarchive-version;</productnumber>
231 <address>&libarchive-url;</address>
232 </sect1info>
233
234 <title>Libarchive-&libarchive-version;</title>
235
236 <sect2 role="installation">
237 <title/>
238<screen><userinput remap="configure">./configure --prefix=/usr \
239 --without-bz2lib \
240 --without-xml2 \
241 --enable-bsdtar=static \
242 --enable-bsdcpio=static</userinput></screen>
243<screen><userinput remap="make">make</userinput></screen>
244<screen><userinput remap="install">make install</userinput></screen>
245 </sect2>
246
247</sect1>
248
249<sect1 id="ch-chroot-openssl" role="wrap">
250 <?dbhtml filename="openssl.html"?>
251
252 <sect1info condition="script">
253 <productname>openssl</productname>
254 <productnumber>&openssl-version;</productnumber>
255 <address>&openssl-url;</address>
256 </sect1info>
257
258 <title>openssl-&openssl-version;</title>
259
260 <sect2 role="installation">
261 <title/>
262<screen><userinput remap="configure">
263./config --prefix=/usr \
264 --openssldir=/etc/ssl \
265 --libdir=lib \
266 shared</userinput></screen>
267<screen><userinput remap="make">make</userinput></screen>
268<screen><userinput remap="install">make install</userinput></screen>
269 </sect2>
270
271</sect1>
272
273<sect1 id="ch-chroot-curl" role="wrap">
274 <?dbhtml filename="curl.html"?>
275
276 <sect1info condition="script">
277 <productname>curl</productname>
278 <productnumber>&curl-version;</productnumber>
279 <address>&curl-url;</address>
280 </sect1info>
281
282 <title>Curl-&curl-version;</title>
283
284 <sect2 role="installation">
285 <title/>
286<screen><userinput remap="configure">./configure --prefix=/usr \
287 --disable-static</userinput></screen>
288<screen><userinput remap="make">make</userinput></screen>
289<screen><userinput remap="install">make install</userinput></screen>
290 </sect2>
291
292</sect1>
293
294<sect1 id="ch-chroot-libcap" role="wrap">
295 <?dbhtml filename="libcap.html"?>
296
297 <sect1info condition="script">
298 <productname>libcap</productname>
299 <productnumber>&libcap-version;</productnumber>
300 <address>&libcap-url;</address>
301 </sect1info>
302
303 <title>libcap-&libcap-version;</title>
304
305 <sect2 role="installation">
306 <title/>
307<screen><userinput remap="pre">sed -i '/install.*STACAPLIBNAME/d' libcap/Makefile</userinput></screen>
308<screen><userinput remap="make">make lib=lib</userinput></screen>
309<screen><userinput remap="install">make lib=lib PKGCONFIGDIR=/usr/lib/pkgconfig install
310chmod -v 755 /lib/libcap.so.&libcap-version;
311mv -v /lib/libpsx.a /usr/lib
312rm -v /lib/libcap.so
313ln -sfv ../../lib/libcap.so.2 /usr/lib/libcap.so</userinput></screen>
314 </sect2>
315
316</sect1>
317
318<sect1 id="ch-chroot-fakeroot" role="wrap">
319 <?dbhtml filename="fakeroot.html"?>
320
321 <sect1info condition="script">
322 <productname>fakeroot</productname>
323 <productnumber>&fakeroot-version;</productnumber>
324 <address>&fakeroot-url;</address>
325 </sect1info>
326
327 <title>fakeroot-&fakeroot-version;</title>
328
329 <sect2 role="installation">
330 <title/>
331<screen><userinput remap="configure">./configure --prefix=/usr</userinput></screen>
332<screen><userinput remap="make">make</userinput></screen>
333<screen><userinput remap="install">make install</userinput></screen>
334 </sect2>
335
336</sect1>
337
338<sect1 id="ch-chroot-zlib" role="wrap">
339 <?dbhtml filename="zlib.html"?>
340
341 <sect1info condition="script">
342 <productname>zlib</productname>
343 <productnumber>&zlib-version;</productnumber>
344 <address>&zlib-url;</address>
345 </sect1info>
346
347 <title>zlib-&zlib-version;</title>
348
349 <sect2 role="installation">
350 <title/>
351<screen><userinput remap="configure">./configure --prefix=/usr</userinput></screen>
352<screen><userinput remap="make">make</userinput></screen>
353<screen><userinput remap="install">make install
354mv -v /usr/lib/libz.so.* /lib
355ln -sfv ../../lib/$(readlink /usr/lib/libz.so) /usr/lib/libz.so</userinput></screen>
356 </sect2>
357
358</sect1>
359
360<sect1 id="ch-chroot-libffi" role="wrap">
361 <?dbhtml filename="libffi.html"?>
362
363 <sect1info condition="script">
364 <productname>libffi</productname>
365 <productnumber>&libffi-version;</productnumber>
366 <address>&libffi-url;</address>
367 </sect1info>
368
369 <title>libffi-&libffi-version;</title>
370
371 <sect2 role="installation">
372 <title/>
373<screen><userinput remap="configure">./configure --prefix=/usr --disable-static --with-gcc-arch=native</userinput></screen>
374<screen><userinput remap="make">make</userinput></screen>
375<screen><userinput remap="install">make install</userinput></screen>
376 </sect2>
377
378</sect1>
379
380<sect1 id="ch-chroot-python" role="wrap">
381 <?dbhtml filename="Python-pass2.html"?>
382
383 <sect1info condition="script">
384 <productname>Python</productname>
385 <productnumber>&python-version;</productnumber>
386 <address>&python-url;</address>
387 </sect1info>
388
389 <title>Python-&python-version;</title>
390
391 <sect2 role="installation">
392 <title/>
393<screen><userinput remap="configure">./configure --prefix=/usr --without-ensurepip --enable-shared</userinput></screen>
394<screen><userinput remap="make">make</userinput></screen>
395<screen><userinput remap="install">make install</userinput></screen>
396 </sect2>
397
398</sect1>
399
400<sect1 id="ch-chroot-ninja" role="wrap">
401 <?dbhtml filename="ninja.html"?>
402
403 <sect1info condition="script">
404 <productname>ninja</productname>
405 <productnumber>&ninja-version;</productnumber>
406 <address>&ninja-url;</address>
407 </sect1info>
408
409 <title>ninja-&ninja-version;</title>
410
411 <sect2 role="installation">
412 <title/>
413<screen><userinput remap="configure">python3 configure.py --bootstrap</userinput></screen>
414<screen><userinput remap="install">install -vm755 ninja /usr/bin/</userinput></screen>
415 </sect2>
416
417</sect1>
418
419<sect1 id="ch-chroot-meson" role="wrap">
420 <?dbhtml filename="meson.html"?>
421
422 <sect1info condition="script">
423 <productname>meson</productname>
424 <productnumber>&meson-version;</productnumber>
425 <address>&meson-url;</address>
426 </sect1info>
427
428 <title>meson-&meson-version;</title>
429
430 <sect2 role="installation">
431 <title/>
432<screen><userinput remap="install">cp meson.py /usr/bin/meson
433cp -rv mesonbuild /usr/bin</userinput></screen>
434 </sect2>
435
436</sect1>
437
438<sect1 id="ch-chroot-pkgconfig" role="wrap">
439 <?dbhtml filename="pkgconfig.html"?>
440
441 <sect1info condition="script">
442 <productname>pkg-config</productname>
443 <productnumber>&pkgconfig-version;</productnumber>
444 <address>&pkgconfig-url;</address>
445 </sect1info>
446
447 <title>pkg-config-&pkgconfig-version;</title>
448
449 <sect2 role="installation">
450 <title/>
451<screen><userinput remap="configure">./configure --prefix=/usr \
452 --with-internal-glib \
453 --disable-host-tool \
454 --docdir=/usr/share/doc/pkg-config-&pkgconfig-version;</userinput></screen>
455<screen><userinput remap="make">make</userinput></screen>
456<screen><userinput remap="install">make install</userinput></screen>
457 </sect2>
458
459</sect1>
460
461<sect1 id="ch-chroot-pkgmngt" role="wrap">
462 <?dbhtml filename="pacman.html"?>
463
464 <sect1info condition="script">
465 <productname>pacman</productname>
466 <productnumber>&pacman-version;</productnumber>
467 <address>&pacman-url;</address>
468 </sect1info>
469
470 <title>Pacman-&pacman-version;</title>
471
472 <sect2 role="installation">
473 <title/>
474<screen><userinput remap="configure">mkdir build
475cd build
476meson --prefix=/usr \
477 -Dcrypto=openssl \
478 -Ddoc=disabled \
479 -Dgpgme=disabled</userinput></screen>
480
481<screen><userinput remap="make">ninja</userinput></screen>
482
483<screen><userinput remap="install">ninja install</userinput></screen>
484
485<screen><userinput>sed -e 's/\([^!]\)strip/\1!strip/' \
486 -e 's/\([^!]\)libtool/\1!libtool/' \
487 -e 's/\([^!]\)zipman/\1!zipman/' \
488 -i /etc/makepkg.conf
489cat &gt;&gt; /etc/makepkg.conf &lt;&lt; EOF
490BUILDDIR=/sources
491PKGDEST=/var/lib/packages
492PACKAGER="Pierre Labastie &lt;lnimbus@club-internet.fr&gt;"
493EOF
494cat &gt;&gt; /etc/pacman.conf &lt;&lt; EOF
495DBPath = /var/lib/pacman/
496CacheDir = /var/cache/pacman/pkg/
497LogFile = /var/log/pacman.log
498SigLevel = Never
499# Repository: do not add one now: repo-add needs openssl.
500EOF</userinput></screen>
501
502 </sect2>
503
504</sect1>
505
506<sect1 id="ch-chroot-shadow" role="wrap">
507 <?dbhtml filename="shadow.html"?>
508
509 <sect1info condition="script">
510 <productname>shadow</productname>
511 <productnumber>&shadow-version;</productnumber>
512 <address>&shadow-url;</address>
513 </sect1info>
514
515 <title>shadow-&shadow-version;</title>
516
517 <sect2 role="installation">
518 <title/>
519<screen><userinput remap="pre">sed -i 's/groups$(EXEEXT) //' src/Makefile.in
520find man -name Makefile.in -exec sed -i 's/groups\.1 / /' {} \;
521find man -name Makefile.in -exec sed -i 's/getspnam\.3 / /' {} \;
522find man -name Makefile.in -exec sed -i 's/passwd\.5 / /' {} \;
523sed -e 's:#ENCRYPT_METHOD DES:ENCRYPT_METHOD SHA512:' \
524 -e 's:/var/spool/mail:/var/mail:' \
525 -i etc/login.defs
526sed -i 's/1000/999/' etc/useradd</userinput></screen>
527<screen><userinput remap="configure">touch /usr/bin/passwd
528./configure --sysconfdir=/etc \
529 --with-group-name-max-length=32</userinput></screen>
530<screen><userinput remap="make">make</userinput></screen>
531<screen><userinput remap="install">make install</userinput></screen>
532 </sect2>
533
534</sect1>
535
536<!-- Mandatory section for creating dirs. These instructions are added at the
537end of the creating dirs instructions of the book. Do not change the
538following line -->
539<sect1 id="ch-pkgmngt-creatingdirs">
540
541 <title>Creating Directories</title>
542
543<screen><userinput>mkdir -pv /var/{lib/{packages,pacman},cache/pkg}</userinput></screen>
544
545</sect1>
546<!-- Same for files. Do not change the following line -->
547<sect1 id="ch-pkgmngt-createfiles">
548
549 <title>Creating Essential Files</title>
550
551<screen><userinput>if ! grep -q tester /etc/passwd; then
552 echo "builder:x:101:101::/home/builder:/bin/bash" >> /etc/passwd
553 echo "builder:x:101:" >> /etc/group
554 install -o builder -d /home/builder
555else
556 TEST_UID=$(grep tester /etc/passwd | cut -d: -f3)
557 TEST_GID=$(grep tester /etc/group | cut -d: -f3)
558 echo "builder:x:$((TEST_UID+1)):$((TEST_GID+1))::/home/builder:/bin/bash" >> /etc/passwd
559 echo "builder:x:$((TEST_GID+1)):" >> /etc/group
560 install -o builder -d /home/builder
561fi
562chown builder:builder /var/lib/{packages,pacman}</userinput></screen>
563
564</sect1>
565
566<!-- Last but not least : Final instructions for installing the
567package manager at the end of chapter 6. Again, the scriptlet file name is
568taken from the dbhtml instruction, with digits added before and .html cut
569and the tarball name is formed from this name + version. So the file
570here _must_ be the same as in chapter 5. If rendering in html, both
571sets of instructions end up in the same file, which is usually not a problem.
572-->
573<sect1 id="ch-system-libarchive" role="wrap">
574 <?dbhtml filename="libarchive.html"?>
575
576 <sect1info condition="script">
577 <productname>libarchive</productname>
578 <productnumber>&libarchive-version;</productnumber>
579 <address>&libarchive-url;</address>
580 </sect1info>
581
582 <title>Libarchive-&libarchive-version;</title>
583
584 <sect2 role="installation">
585 <title/>
586<screen><userinput remap="configure">./configure --prefix=/usr \
587 --disable-static</userinput></screen>
588<screen><userinput remap="make">make</userinput></screen>
589<screen><userinput remap="install">make DESTDIR=$PKG_DEST install</userinput></screen>
590 </sect2>
591
592</sect1>
593<sect1 id="ch-system-curl" role="wrap">
594 <?dbhtml filename="curl.html"?>
595
596 <sect1info condition="script">
597 <productname>curl</productname>
598 <productnumber>&curl-version;</productnumber>
599 <address>&curl-url;</address>
600 </sect1info>
601
602 <title>Curl-&curl-version;</title>
603
604 <sect2 role="installation">
605 <title/>
606<screen><userinput remap="configure">./configure --prefix=/usr \
607 --disable-static \
608 --enable-threaded-resolver</userinput></screen>
609<screen><userinput remap="make">make</userinput></screen>
610<screen><userinput remap="install">make DESTDIR=$PKG_DEST install
611find docs \( -name "Makefile*" -o -name "*.1" -o -name "*.3" \) -exec rm {} \;
612install -v -d -m755 $PKG_DEST/usr/share/doc/curl-&curl-version;
613cp -v -R docs/* $PKG_DEST/usr/share/doc/curl-&curl-version;</userinput></screen>
614 </sect2>
615
616</sect1>
617
618<sect1 id="ch-system-fakeroot" role="wrap">
619 <?dbhtml filename="fakeroot.html"?>
620
621 <sect1info condition="script">
622 <productname>fakeroot</productname>
623 <productnumber>&fakeroot-version;</productnumber>
624 <address>&fakeroot-url;</address>
625 </sect1info>
626
627 <title>fakeroot-&fakeroot-version;</title>
628
629 <sect2 role="installation">
630 <title/>
631<screen><userinput remap="configure">./configure --prefix=/usr</userinput></screen>
632<screen><userinput remap="make">make</userinput></screen>
633<screen><userinput remap="install">make DESTDIR=$PKG_DEST install</userinput></screen>
634 </sect2>
635
636</sect1>
637
638<sect1 id="ch-system-pkgmngt" role="wrap">
639 <?dbhtml filename="pacman.html"?>
640
641 <sect1info condition="script">
642 <productname>pacman</productname>
643 <productnumber>&pacman-version;</productnumber>
644 <address>&pacman-url;</address>
645 </sect1info>
646
647 <title>Pacman-&pacman-version;</title>
648
649 <sect2 role="installation">
650 <title/>
651
652<screen><userinput remap="configure">mkdir build
653cd build
654meson --prefix=/usr \
655 -Dcrypto=openssl</userinput></screen>
656
657<screen><userinput remap="make">ninja</userinput></screen>
658
659<!-- Those instructions are executed with PKG_DEST set. They are not processed
660in any way to add $PKG_DEST at some place, and the PKG_DEST directory is not
661populated before, so it is basically empty. You have thus to create any directory
662needed in $PKG_DEST and not otherwise created by the make install command. -->
663<screen><userinput remap="install">DESTDIR=$PKG_DEST ninja install</userinput></screen>
664
665<screen><userinput>sed -e 's/\([^!]\)strip/\1!strip/' \
666 -e 's/\([^!]\)zipman/\1!zipman/' \
667 -e 's/\([^!]\)libtool/\1!libtool/' \
668 -i /etc/makepkg.conf
669cat &gt;&gt; /etc/makepkg.conf &lt;&lt; EOF
670BUILDDIR=/sources
671PKGDEST=/var/lib/packages
672PACKAGER="Pierre Labastie &lt;lnimbus@club-internet.fr&lt;"
673EOF
674cat &gt;&gt; /etc/pacman.conf &lt;&lt; EOF
675DBPath = /var/lib/pacman/
676CacheDir = /var/cache/pacman/pkg/
677LogFile = /var/log/pacman.log
678SigLevel = Never
679EOF</userinput></screen>
680
681 </sect2>
682
683</sect1>
684</article>
Note: See TracBrowser for help on using the repository browser.