source: pkgmngt/packageManager.xml.template@ e0bbc6e

ablfs-more legacy trunk
Last change on this file since e0bbc6e was fd4a798, checked in by Pierre Labastie <pierre.labastie@…>, 3 years ago

Remove $Id$ comments, they are useless with git

  • Property mode set to 100644
File size: 8.9 KB
RevLine 
[7072e1f]1<!-- Mandatory header for xml files change encoding to the one
2you use on your computer -->
3<?xml version="1.0" encoding="UTF-8"?>
4<!-- Mandatory DOCTYPE declaration. Fill free to add entities,
5but no external entities in local files, since they would not
6be accessible from JHALFSDIR. Change the document type `article' to
7book if you prefer. That slightly changes the aspect if you render
8it in html -->
9<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
10 "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" >
11
12<!-- The first markup should be the one defined in the DOCTYPE DECLARATION -->
13<article>
14
15<!-- First section for the tarball download address.
16Only the next four lines are mandatory, but you can add anything
17to make the text look more like the LFS book.
[49f8b03]18You can add several packages (see packageManager.xml.pacman)
[7072e1f]19Do not change anything, except the url and the md5 checksum. -->
20<sect1 id="package">
21 <para>Download: <ulink url="http://your/package-manager/url"/></para>
22 <para>MD5 sum: <literal>package-md5-checksum</literal></para>
23</sect1>
24
25<!-- If needed, uncomment and edit this:
26<sect1 id="patches">
27 <para>Download: <ulink url="somepatch-url"/></para>
28 <para>MD5 sum: <literal>somepatch-md5</literal></para>
29</sect1>
30-->
31
[49f8b03]32<!-- We have three groups of sections with installation instructions:
33 - the one with id ch-tools-xxx is for old book, where
34 the package manager (and its needed deps) is built as user
35 lfs in /tools
36 - the one with id ch-chroot-xxx is for new book, where the
37 package manager (and its needed deps) is built temporarily
38 in chroot
39 - the one with id ch-system-xxx is for both book, when the
40 package manager (and its deps) is rebuilt with instructions
41 to make a package of it.
42
43 Do not change the next line, except the -pkgmngt part.
44 The name of the scriptlet will be taken from the dbhtml instruction:
45 it is the name of the file less .html, with xxx-x-added before
46 (x, digits). -->
[7072e1f]47<sect1 id="ch-tools-pkgmngt" role="wrap">
[49f8b03]48 <?dbhtml filename="pkgmngt.html"?>
49<!-- the next lines are now mandatory for unpacking the tarball at the
50 beginning of the scriptlet -->
51 <sect1info condition="script">
52 <productname>dpkg</productname>
53 <productnumber>x.y.z</productnumber><!-- version -->
54 <address>http://where/is/your/package</address><!-- url -->
55 </sect1info>
56<!-- next line mandatory without change, but feel free to add any title,
57other sect2 (with different role), sectinfo and so on -->
58 <sect2 role="installation">
59<!-- You can use any number of remap="pre", "configure", "make", "test", "install"
60<screen><userinput remap="something">Instructions</userinput></screen>.
61They are executed in that order. "pre" can be used for patching for example.
62In case testing is enabled, the instructions flagged test are logged to a different
63file (test-log). If testing is not enabled, they are not executed at all. Do not
64put line breaks before and after your instructions. <userinput> without
65remap attribute are considered configuration instructions and executed last. You
66can also use remap="adjust" for the same purpose. -->
67<screen><userinput remap="configure">./configure --prefix=/tools \
68 --disable-nls --without-dselect \
69 --without-start-stop-daemon \
70 --without-update-alternatives \
71 --without-install-info \
72 --without-zlib --with-bz2=static --without-selinux</userinput></screen>
73
74<screen><userinput remap="make">(cd lib &amp;&amp; make)
75(cd src &amp;&amp; make)
76(cd dpkg-deb &amp;&amp; make)
77(cd dpkg-split &amp;&amp; make)</userinput></screen>
78
79<screen><userinput remap="install">cp src/dpkg src/dpkg-* /tools/bin
80cp dpkg-deb/dpkg-deb /tools/bin
81cp dpkg-split/dpkg-split /tools/bin
82mkdir -pv /tools/etc/dpkg/{,dpkg.cfg.d}
83cp debian/dpkg.cfg /tools/etc/dpkg</userinput></screen>
84
85<screen><userinput>cat &gt;&gt; /tools/etc/dpkg/dpkg.cfg &lt;&lt; EOF
86# admindir on LFS system
87admindir /var/lib/dpkg
88EOF</userinput></screen>
89
90<screen><userinput>cat &gt;&gt; /tools/etc/dpkg/dpkg.cfg &lt;&lt; EOF
91# disable fatal error on path checking
92force-bad-path
93EOF</userinput></screen>
94
95 </sect2>
96
97</sect1>
98
99<!-- for new book, at the end of chapter 7 -->
100<sect1 id="ch-chroot-pkgmngt" role="wrap">
101 <?dbhtml filename="pkgmngt.html"?>
[2758d94]102<!-- the next lines are now mandatory for unpacking the tarball at the
103 beginning of the scriptlet -->
104 <sect1info condition="script">
105 <productname>dpkg</productname>
106 <productnumber>x.y.z</productnumber><!-- version -->
107 <address>http://where/is/your/package</address><!-- url -->
108 </sect1info>
[7072e1f]109<!-- next line mandatory without change, but feel free to add any title,
110other sect2 (with different role), sectinfo and so on -->
111 <sect2 role="installation">
112<!-- You can use any number of remap="pre", "configure", "make", "test", "install"
113<screen><userinput remap="something">Instructions</userinput></screen>.
114They are executed in that order. "pre" can be used for patching for example.
115In case testing is enabled, the instructions flagged test are logged to a different
116file (test-log). If testing is not enabled, they are not executed at all. Do not
117put line breaks before and after your instructions. <userinput> without
118remap attribute are considered configuration instructions and executed last. You
119can also use remap="adjust" for the same purpose. -->
120<screen><userinput remap="configure">./configure --prefix=/tools \
121 --disable-nls --without-dselect \
122 --without-start-stop-daemon \
123 --without-update-alternatives \
124 --without-install-info \
125 --without-zlib --with-bz2=static --without-selinux</userinput></screen>
126
127<screen><userinput remap="make">(cd lib &amp;&amp; make)
128(cd src &amp;&amp; make)
129(cd dpkg-deb &amp;&amp; make)
130(cd dpkg-split &amp;&amp; make)</userinput></screen>
131
132<screen><userinput remap="install">cp src/dpkg src/dpkg-* /tools/bin
133cp dpkg-deb/dpkg-deb /tools/bin
134cp dpkg-split/dpkg-split /tools/bin
135mkdir -pv /tools/etc/dpkg/{,dpkg.cfg.d}
136cp debian/dpkg.cfg /tools/etc/dpkg</userinput></screen>
137
138<screen><userinput>cat &gt;&gt; /tools/etc/dpkg/dpkg.cfg &lt;&lt; EOF
139# admindir on LFS system
140admindir /var/lib/dpkg
141EOF</userinput></screen>
142
143<screen><userinput>cat &gt;&gt; /tools/etc/dpkg/dpkg.cfg &lt;&lt; EOF
144# disable fatal error on path checking
145force-bad-path
146EOF</userinput></screen>
147
148 </sect2>
149
150</sect1>
151
152<!-- Mandatory section for creating dirs. These instructions are added at the
153end of the creating dirs instructions of the book. Do not change the
154following line -->
[575bcf3]155<sect1 id="ch-pkgmngt-creatingdirs">
[7072e1f]156
[575bcf3]157<!-- Put the create dir intructions there. feel free to add
[7072e1f]158any explaining <title>Title</title> and <para>explanations</para> -->
159<screen><userinput>mkdir -pv /var/{log,lib/dpkg/{info,updates}}
160mkdir -pv /var/lib/packages</userinput></screen>
161
162</sect1>
[49f8b03]163<!-- Same for files. Do not change the following line.
164 Those instructions are not executed for the new book.
165 If needed create files at the end of the temp install. -->
[575bcf3]166<sect1 id="ch-pkgmngt-createfiles">
[7072e1f]167
168<screen><userinput>touch /var/lib/dpkg/{available,status}
169touch /var/log/dpkg.log</userinput></screen>
170
171</sect1>
172
173<!-- Last but not least : Final instructions for installing the
174package manager at the end of chapter 6. Again, the scriptlet file name is
[2758d94]175taken from the dbhtml instruction, with digits added before and .html cut.
[49f8b03]176There can be any number of sections for dependencies, all with id
177ch-system-xxx (all the id's must be different).
[7072e1f]178-->
179<sect1 id="ch-system-pkgmngt" role="wrap">
180 <?dbhtml filename="dpkg.html"?>
181
[2758d94]182<!-- the next lines are now mandatory for unpacking the tarball at the
183 beginning of the scriptlet -->
184 <sect1info condition="script">
185 <productname>dpkg</productname><!-- for example -->
186 <productnumber>x.y.z</productnumber><!-- version -->
187 <address>http://where/is/your/package</address><!-- url -->
188 </sect1info>
189
[7072e1f]190 <sect2 role="installation">
191
192<screen><userinput remap="configure">./configure --prefix=/usr \
193 --without-dselect \
194 --without-start-stop-daemon \
195 --without-update-alternatives \
196 --without-install-info \
197 --without-selinux</userinput></screen>
198
199<screen><userinput remap="make">make</userinput></screen>
200
201<!-- Those instructions are executed with PKG_DEST set. They are not processed
202in any way to add $PKG_DEST at some place, and the PKG_DEST directory is not
203populated before, so it is basically empty. You have thus to create any directory
204needed in $PKG_DEST and not otherwise created by the make install command. -->
205<screen><userinput remap="install">mkdir -pv $PKG_DEST
206make DESTDIR=$PKG_DEST install
207mkdir -pv $PKG_DEST/etc/dpkg/{,dpkg.cfg.d}
208cp debian/dpkg.cfg $PKG_DEST/etc/dpkg</userinput></screen>
209
210<screen><userinput remap="install">cat &gt;&gt; $PKG_DEST/etc/dpkg/dpkg.cfg &lt;&lt; EOF
211# admindir on LFS system
212admindir /var/lib/dpkg
213EOF</userinput></screen>
214
215<screen><userinput>cat &gt;&gt; $PKG_DEST/etc/dpkg/dpkg.cfg &lt;&lt; EOF
216# disable fatal error on path checking
217force-bad-path
218EOF</userinput></screen>
219
220 </sect2>
221
222</sect1>
223</article>
Note: See TracBrowser for help on using the repository browser.