# $Id$ menu "BOOK Settings" depends on !REBUILD_MAKEFILE #--- BOOK/script choice prompt "Use BOOK" default BOOK_LFS help Select the book where build instructions are retrieved. config BOOK_LFS bool "Linux From Scratch System V" help Set up the tools to build LFS with Sys V init. config BOOK_LFS_SYSD bool "Linux From Scratch systemd" help Set up the tools to build LFS with systemd init. config BOOK_CLFS bool "Cross-Compiled Linux From Scratch" help Set up the tools to build CLFS. config BOOK_CLFS2 bool "Cross-Compiled Linux From Scratch (Sysroot method)" help Set up the tools to build CLFS by the sysroot method. config BOOK_CLFS3 bool "Cross-Compiled Linux From Scratch (Embedded Systems)" help Set up the tools to build CLFS with tools for embedded systems. config BOOK_BLFS bool "Beyond Linux From Scratch (see help)" help if the (C)LFS system has already been built, install the tools to build BLFS packages. endchoice choice depends on BOOK_BLFS prompt "Init system" config BLFS_SYSV bool "BLFS Sys V" help Extract the Sys V flavour of the BLFS book config BLFS_SYSD bool "BLFS systemd" help Extract the systemd flavour of the BLFS book endchoice config INITSYS string default "sysv" if BOOK_LFS || BLFS_SYSV default "systemd" if BOOK_LFS_SYSD || BLFS_SYSD config PROGNAME string default "lfs" if BOOK_LFS || BOOK_LFS_SYSD default "clfs" if BOOK_CLFS default "clfs2" if BOOK_CLFS2 default "clfs3" if BOOK_CLFS3 config RUN_ME string default "./jhalfs run" if BOOK_LFS || BOOK_LFS_SYSD || BOOK_CLFS || \ BOOK_CLFS2 || BOOK_CLFS_3 default "./install-blfs-tools.sh auto" if BOOK_BLFS #--- End BOOK/script #--- Book version choice prompt "Release" default relSVN if BOOK_LFS || BOOK_LFS_SYSD || BOOK_BLFS default relGIT if BOOK_CLFS || BOOK_CLFS2 || BOOK_CLFS3 config relSVN bool "SVN" depends on BOOK_LFS || BOOK_BLFS || BOOK_LFS_SYSD help Current development version as in trunk config relGIT bool "GIT" depends on BOOK_CLFS || BOOK_CLFS2 || BOOK_CLFS3 help Current development git master branch config WORKING_COPY bool "Working Copy" help A local working copy config BRANCH bool "Branch or stable book" if !BOOK_CLFS2 && !BOOK_CLFS3 help A supported SVN/GIT branch or stable released book endchoice config BRANCH_ID string "Branch (preceded by \"branch-\"), stable Version, or tag" default "**EDIT ME**" depends on BRANCH help A list of valid branches and stable book IDs is available at http://wiki.linuxfromscratch.org/alfs/wiki/SupportedBooks Enter "branch-XXX" for branch XXX, or just "YYY" for stable (or tag) YYY version. config BOOK string "Loc of working copy (mandatory)" default "**EDIT ME**" depends on WORKING_COPY help The full path to a local copy of the book XML sources #--- End BOOK version #--- CLFS specific params choice prompt "Target architecture" default ARCH_X86 depends on BOOK_CLFS || BOOK_CLFS2 || BOOK_CLFS3 help Choose the target system base architecture config ARCH_X86 bool "x86" config ARCH_MIPS bool "mips" if !BOOK_CLFS2 config ARCH_PPC bool "ppc" if BOOK_CLFS config ARCH_SPARC bool "sparc" if BOOK_CLFS config ARCH_ALPHA bool "alpha" if !BOOK_CLFS3 config ARCH_ARM bool "arm" if !BOOK_CLFS config ARCH_HPPA bool "hppa" if BOOK_CLFS2 endchoice choice prompt "Hardware Platform" depends on BOOK_CLFS3 && ARCH_MIPS default PLATFORM_GENERIC help Choose a destination platform Platform specific files will be included config PLATFORM_GENERIC bool "Generic platform" config PLATFORM_WRT bool "WRT - MIPS based wireless router" if ARCH_MIPS endchoice choice prompt "Library" depends on (BOOK_CLFS && !ARCH_ALPHA) || (BOOK_CLFS3 && ARCH_MIPS) default DATA_32 help Choose the target system libraries type config DATA_32 bool "32-bit" config DATA_64 bool "64-bit" config DATA_MULTI bool "multilib" if !(BOOK_CLFS3 && ARCH_MIPS ) endchoice choice prompt "Processor type" depends on (BOOK_CLFS || BOOK_CLFS2 || BOOK_CLFS3) && ((ARCH_X86 && !(DATA_64 || DATA_MULTI)) || ARCH_MIPS || ARCH_HPPA || ARCH_ALPHA || (ARCH_SPARC && (DATA_64 || DATA_MULTI)) || (ARCH_ARM && BOOK_CLFS3)) help Choose the target system processor config PROC_i486 bool "486 Compatibles" if ARCH_X86 config PROC_i586 bool "Pentium, K6, 586 Compatibles" if ARCH_X86 config PROC_i686 bool "Pentium II, Pentium III, Pentium 4, Athlon, Duron" if ARCH_X86 config PROC_mipsel bool "MIPS Little Endian" if ARCH_MIPS config PROC_mips bool "MIPS Big Endian" if ARCH_MIPS config PROC_unknown bool "Unknown" if ARCH_HPPA || ARCH_ALPHA config PROC_hppa1 bool "PA 7000 Series" if ARCH_HPPA config PROC_hppa2 bool "PA 8000 Series" if ARCH_HPPA config PROC_EV5 bool "EV5 Series" if ARCH_ALPHA config PROC_EV56 bool "EV56 Series" if ARCH_ALPHA config PROC_PCA56 bool "PCA56 Series" if ARCH_ALPHA config PROC_PCA57 bool "PCA57 Series" if ARCH_ALPHA config PROC_EV6 bool "EV6 Series" if ARCH_ALPHA config PROC_EV67 bool "EV67 Series" if ARCH_ALPHA config PROC_EV68 bool "EV68 Series" if ARCH_ALPHA config PROC_ARM bool "Generic arm, little endian" if ARCH_ARM config PROC_ARM5L bool "Generic arm, version 5, little endian" if ARCH_ARM config PROC_ARM5B bool "Generic arm, version 5, big endian" if ARCH_ARM config PROC_ULTRA1 bool "UtraSparc" if ARCH_SPARC && (DATA_64 || DATA_MULTI) config PROC_ULTRA2 bool "UtraSparc2" if ARCH_SPARC && (DATA_64 || DATA_MULTI) config PROC_ULTRA3 bool "UtraSparc3" if ARCH_SPARC && (DATA_64 || DATA_MULTI) endchoice choice prompt "MIPS 64 ABI" depends on BOOK_CLFS3 && ARCH_MIPS && DATA_64 default ABI_64 help Choose the target system ABI to use config ABI_32 bool "o32" config ABI_N32 bool "n32" config ABI_64 bool "n64" endchoice config TARGET string default "i486-pc-linux-gnu" if !BOOK_CLFS3 && PROC_i486 default "i586-pc-linux-gnu" if !BOOK_CLFS3 && PROC_i586 default "i686-pc-linux-gnu" if !BOOK_CLFS3 && PROC_i686 default "i486-pc-linux-uclibc" if BOOK_CLFS3 && PROC_i486 default "i586-pc-linux-uclibc" if BOOK_CLFS3 && PROC_i586 default "i686-pc-linux-uclibc" if BOOK_CLFS3 && PROC_i686 default "x86_64-unknown-linux-gnu" if ARCH_X86 && (DATA_64 || DATA_MULTI) default "mipsel-unknown-linux-gnu" if !BOOK_CLFS3 && PROC_mipsel && DATA_32 default "mips-unknown-linux-gnu" if !BOOK_CLFS3 && PROC_mips && DATA_32 default "mips64el-unknown-linux-gnu" if !BOOK_CLFS3 && PROC_mipsel && (DATA_64 || DATA_MULTI) default "mips64-unknown-linux-gnu" if !BOOK_CLFS3 && PROC_mips && (DATA_64 || DATA_MULTI) default "mipsel-unknown-linux-uclibc" if BOOK_CLFS3 && PROC_mipsel && DATA_32 default "mips-unknown-linux-uclibc" if BOOK_CLFS3 && PROC_mips && DATA_32 default "mips64el-unknown-linux-uclibc" if BOOK_CLFS3 && PROC_mipsel && DATA_64 default "mips64-unknown-linux-uclibc" if BOOK_CLFS3 && PROC_mips && DATA_64 default "powerpc-unknown-linux-gnu" if ARCH_PPC && DATA_32 default "powerpc64-unknown-linux-gnu" if ARCH_PPC && (DATA_MULTI || DATA_64) default "sparc-unknown-linux-gnu" if ARCH_SPARC && DATA_32 default "sparc64-unknown-linux-gnu" if ARCH_SPARC && (DATA_64 || DATA_MULTI) default "hppa-unknown-linux-gnu" if PROC_unknown && ARCH_HPPA default "hppa1.1-unknown-linux-gnu" if PROC_hppa1 default "hppa2.0-unknown-linux-gnu" if PROC_hppa2 default "arm-unknown-linux-gnueabi" if ARCH_ARM && BOOK_CLFS2 default "arm-unknown-linux-uclibc" if PROC_ARM default "armv5l-unknown-linux-uclibc" if PROC_ARM5L default "armv5b-unknown-linux-uclibc" if PROC_ARM5B default "alpha-unknown-linux-gnu" if PROC_unknown && ARCH_ALPHA default "alphaev5-unknown-linux-gnu" if PROC_EV5 default "alphaev56-unknown-linux-gnu" if PROC_EV56 default "alphapca56-unknown-linux-gnu" if PROC_PCA56 default "alphapca57-unknown-linux-gnu" if PROC_PCA57 default "alphaev6-unknown-linux-gnu" if PROC_EV6 default "alphaev67-unknown-linux-gnu" if PROC_EV67 default "alphaev68-unknown-linux-gnu" if PROC_EV68 config TARGET32 string depends on DATA_MULTI default "i686-pc-linux-gnu" if ARCH_X86 default "mipsel-unknown-linux-gnu" if PROC_mipsel default "mips-unknown-linux-gnu" if PROC_mips default "sparc-unknown-linux-gnu" if ARCH_SPARC default "powerpc-unknown-linux-gnu" if ARCH_PPC config PLATFORM string default "GENERIC" if (!BOOK_CLFS3) || PLATFORM_GENERIC default "WRT - Wireless Router" if PLATFORM_WRT config SPARC64_PROC string default "none" if !(ARCH_SPARC && (DATA_64 || DATA_MULTI)) default "1" if PROC_ULTRA1 default "2" if PROC_ULTRA2 default "3" if PROC_ULTRA3 config ARCH string default "x86" if ARCH_X86 && (DATA_32 || BOOK_CLFS2 || BOOK_CLFS3) default "x86_64" if ARCH_X86 && DATA_MULTI default "x86_64-64" if ARCH_X86 && DATA_64 default "wrt" if PLATFORM_WRT && BOOK_CLFS3 default "mips" if ARCH_MIPS && (DATA_32 || BOOK_CLFS3) default "mips64" if ARCH_MIPS && DATA_MULTI default "mips64-64" if ARCH_MIPS && DATA_64 && BOOK_CLFS default "ppc" if ARCH_PPC && DATA_32 default "ppc64" if ARCH_PPC && DATA_MULTI default "ppc64-64" if ARCH_PPC && DATA_64 default "sparc" if ARCH_SPARC && DATA_32 default "sparc64" if ARCH_SPARC && DATA_MULTI default "sparc64-64" if ARCH_SPARC && DATA_64 default "alpha" if ARCH_ALPHA default "arm" if ARCH_ARM default "hppa" if ARCH_HPPA config MIPS_LEVEL string depends on BOOK_CLFS3 && ARCH_MIPS default "1" if DATA_32 default "3" if DATA_64 config ABI string depends on BOOK_CLFS3 default "-m32" if ARCH_X86 || ARCH_ARM # default "-m64" if NO USED YET IN THE BOOK default "-mabi=32" if ABI_32 || (ARCH_MIPS && DATA_32) default "-mabi=n32" if ABI_N32 default "-mabi=64" if ABI_64 config ENDIAN string depends on BOOK_CLFS3 && (ARCH_MIPS || ARCH_ARM) default "little" if PROC_mipsel || PROC_ARM || PROC_ARM5L default "big" if PROC_mips || PROC_ARM5B choice prompt "Build method" depends on BOOK_CLFS help What build method should be used: a chroot jail or minimal boot system. Review the Cross-LFS book chap6 "TO BOOT OR CHROOT" for a full explanation. config BUILD_CHROOT bool "chroot" config BUILD_BOOT bool "boot" endchoice config METHOD string default "chroot" if BUILD_CHROOT default "boot" if BUILD_BOOT config BOOT_CONFIG string "BOOT kernel config file (mandatory)" default "***EDIT ME***" depends on BUILD_BOOT help If METHOD=boot, location of boot-kernel config file The config file will be copied to ${BUILD_DIR}/sources and renamed 'bootkernel-config' NOTE: this setting is required #--- End CLFS specific params #--- blfs-tool Support config BLFS_TOOL bool "Add blfs-tool support" default n depends on !BOOK_CLFS3 && !BOOK_BLFS help Activating this option will install additional packages needed to use blfs tools after booting the new system. The blfs-tool files will be installed under $BUILD_DIR/blfs_root (see below). After booting the new xLFS system, but before using the blfs tools, you should create a user account, move the /blfs_root directory to that user's home, and change its ownership to that of the user. Also, be sure to give the user read and write access on the $TRACKING_DIR directory and the files that it contains. Don't forget to configure sudo properly on the new system. config DUMMY # Avoid indenting the items below bool if BLFS_TOOL menu "blfs-tool dependencies" config DEP_LIBXML bool "libxml2 (required)" default y config DEP_LIBXSLT bool "libxslt (required)" default y config DEP_DBXML bool "DocBook XML DTD (required)" default y config DEP_LYNX bool "lynx (optional, for reading the generated book)" default y config DEP_SUDO bool "sudo (recommended)" default y config DEP_WGET bool "wget (recommended)" default y config DEP_GPM bool "GPM (optional, see help)" default n help if you install gpm, it will be started automatically on boot. It allows copy-paste while Xorg is not installed. config DEP_SVN bool "SVN client (optional, see help)" default n help Subversion is needed for updating the book sources. You do not need it if building a stable book. endmenu choice prompt "BLFS Release" default BLFS_SVN config BLFS_SVN bool "BLFS SVN" help Current development version as in trunk config BLFS_WORKING_COPY bool "BLFS working copy" help A local working copy of the BLFS book. config BLFS_BRANCH bool "BLFS Branch or stable book" help A supported SVN branch or stable book release endchoice config BLFS_WC_LOCATION string "Location of the local BLFS working copy (mandatory)" default "**EDIT ME**" depends on BLFS_WORKING_COPY help Full path to the BLFS book working copy config BLFS_BRANCH_ID string "BLFS Book Version (mandatory)" default "**EDIT ME**" depends on BLFS_BRANCH help A list of valid branches and stable book IDs is available at http://wiki.linuxfromscratch.org/alfs/wiki/SupportedBooks. endif #--- End blfs-tool Support #--- BLFS params (Used for installing the tools, either after a jhalfs run # or directly) config BLFS_ROOT string "Root of the tools directory (see help)" default "/blfs_root" depends on BLFS_TOOL || BOOK_BLFS help Path to the directory where all required files and scripts will be stored. This path must begin with a slash, and: - is relative to the user's HOME directory when installing the blfs tools on an already existing LFS system. - is relative to the root of the build directory (`/' in chroot) when adding the tools after a jhalfs run CAUTION: this directory will be removed if it already exists. config BLFS_XML string "BLFS sources directory (internal parameter)" default "blfs-xml" depends on BLFS_TOOL || BOOK_BLFS help The directory name under $BLFS_ROOT where the BLFS book sources will be copied or checked out. Do not change that unless you know what you are doing... config LFS_XML string "LFS sources directory (internal parameter)" default "lfs-xml" depends on BLFS_TOOL || BOOK_BLFS help The directory name under $BLFS_ROOT where the LFS book sources will be copied or checked out. Do not change that unless you know what you are doing... choice prompt "LFS Release" default LFS_relSVN depends on BOOK_BLFS config LFS_relSVN bool "LFS SVN" help Current development version as in trunk config LFS_WORKING_COPY bool "LFS working copy" help A local working copy of the LFS book. config LFS_BRANCH bool "LFS Branch or stable book" help A supported SVN branch or stable book release endchoice config BLFS_LFS_BOOK string "Location of the local LFS working copy (mandatory)" default "**EDIT ME**" depends on LFS_WORKING_COPY help Full path to the LFS book working copy" config BLFS_LFS_BRANCH_ID string "LFS Book Version (mandatory)" default "**EDIT ME**" depends on LFS_BRANCH help A list of valid branches and stable book IDs is available at http://wiki.linuxfromscratch.org/alfs/wiki/SupportedBooks. # End of BLFS parameters #--- Custom Tools support config CUSTOM_TOOLS depends on !BOOK_BLFS bool "Add custom tools support" default n help Activating this option additional packages you create will be installed after finished the xLFS system build. #--- End Custom Tools support #--- This direcotry is needed for blfs tools installation and custom tools # As well. config TRACKING_DIR string "Installed packages database directory" default "/var/lib/jhalfs/BLFS" depends on BOOK_BLFS || BLFS_TOOL || CUSTOM_TOOLS help Full path to the directory where the database of installed packages will be created. If the blfs tools are installed on a running xLFS system, the user must have enough privileges to create this directory. It may be necessary to create the /var/lib/jhalfs directory as root, and make it writable by the user before running this tool. If you are installing the blfs tools as part of an xLFS build and/or using the customized scripts feature, you will need to fix this directory's permissions after booting the new system. Note that the user that will build the packages must have read and write access to this directory. #--- End BOOK Settings endmenu menu "General Settings" depends on !BOOK_BLFS && !REBUILD_MAKEFILE #--- {C,H,}LFS User Account config LUSER string default "lfs" if BOOK_LFS || BOOK_LFS_SYSD default "clfs" if BOOK_CLFS || BOOK_CLFS2 || BOOK_CLFS3 default "hlfs" if BOOK_HLFS config LGROUP string default LUSER config LHOME string default "/home" #--- End Set User Account config BUILDDIR string "Build Directory" default "/mnt/build_dir" help #-- The directory where the created system will be located. # NOTE: A working directory named jhalfs will be created # here, so ensure this does not conflict with the jhalfs # source directory. config GETPKG bool "Retrieve source files" default n help #-- Download all packages and patches required by the selected book # NOTE: Looks for files in the local archive defined by SRC_ARCHIVE # first and if necessary retrieves them from the 'net. # Files will be transferred to $BUILDDIR/sources. config SRC_ARCHIVE string "Package Archive Directory" default "$SRC_ARCHIVE" depends on GETPKG help #-- A local archive for packages/files (not $BUILDDIR/sources) # Any missing file will be downloaded and archived here, # if the user has the right privileges. config RETRYSRCDOWNLOAD bool "Retry on 'connection refused' failure" default n depends on GETPKG help #-- Attempt to download a source package again if it fails # with a 'connection refused' error. This can happen on # servers that are overloaded. config RETRYDOWNLOADCNT int "Number of retry attempts on download failures" default 20 depends on GETPKG help #-- Number of times to retry a failed download. config DOWNLOADTIMEOUT int "Download timeout (in seconds)" default 30 depends on GETPKG help #-- Number of seconds to wait for a download to start before # timing out. config SERVER string "FTP mirror" default "http://ftp.osuosl.org" depends on GETPKG help #-- FTP mirror to download packages and patches if not found # in $SRC_ARCHIVE # As a last resort, the files will downloaded from upstream, # if possible. config RUNMAKE bool "Run the makefile" default n help #-- Automatically run the makefile once it has been created config CLEAN bool "Rebuild files" default n help #-- Clean the build directory before performing any other task. # The directory is cleaned only if it was populated by a # previous JHALFS run. #--- End General Settings endmenu menu "Build Settings" depends on !BOOK_BLFS && !REBUILD_MAKEFILE #--- Test Suites config CONFIG_TESTS bool "Run testsuites" depends on !BOOK_CLFS2 && !BOOK_CLFS3 default y help #-- Run test suites # If you select 'y' here: # You will have to select between: # - Only critical final system testsuites # - All final system testsuites # - Both temporary tools and final system testsuites # You will be prompted also about the "flavour" of the # testsuites run: # - Don't stop on test suite failures # - Abort the build at the first test suite failure # # Note that in any case, all the test instructions will # be generated. Those which are not wanted will be commented # out. If you select 'n' here, the commented test instructions # do not stop on test suite failures. # # HLFS and CLFS have no testsuites available in the # temporary tools phase menu "Test settings" depends on CONFIG_TESTS choice prompt "Tests level" default TST_1 config TST_1 bool "Only final system critical testsuites" help #-- Critical tests: # Only Glibc, Binutils, GMP, MPFR, MPC and GCC # testsuites for final system. The others are commented # out. config TST_2 bool "All final system testsuites" help #-- All final system test suites: # Test instructions for the temporary tools (if available) # are commented out. config TST_3 bool "All testsuites" if !BOOK_HLFS && !BOOK_CLFS help #-- All tests: # Runs all the testsuites for both temporary tools (if # available) and final system endchoice choice prompt "Flavour" config NO_BOMB bool "Don't stop on test failures" config BOMB bool "Abort the build on the first test failure" endchoice endmenu # test settings config TEST int default "0" if !CONFIG_TESTS default "1" if TST_1 default "2" if TST_2 default "3" if TST_3 config BOMB_TEST bool default n if NO_BOMB default y if BOMB #--- End Test Suites #--- Package Management config PKGMNGT bool "Package management" depends on BOOK_LFS || BOOK_LFS_SYSD default n help #-- Use package management # # If set, you'll have to choose between # two package management styles: # - Build and install: # the packages in the final phase are built # in a separate directory, PKG_DEST. # You should provide a bash function for # packaging and installing the package. # - Preload a library before install: # Run the install instructions inside a # wrapper command, which monitors the # installed files. # # Also, you have to provide the instructions # to build the package manager during the # temporary tools phase, in the form of a # sect1 of the book identical to a package # sect1. See README.PACKAGE_MANAGEMENT # # For now, this only works with LFS choice depends on PKGMNGT prompt "Package management style" default PKG_PACK config PKG_PACK bool "Build and pack (pacman or dpkg style)" config LIB_LOAD bool "Preload a library before installing (porg style)" endchoice config WRAP_INSTALL bool default y if LIB_LOAD default n if PKG_PACK #--- End package management #--- Installed files logs config INSTALL_LOG bool "Create a log of installed files for each package" default n help #-- Select this if you want to create logs of the files # installed by each package on the final system. #--- End Installed files logs config STRIP bool "Strip Installed Binaries/Libraries" default n depends on !BOOK_CLFS3 config DEL_LA_FILES bool "Remove libtool .la files" default y help #-- Remove files libxxx.la installed by libtool. For a rationale # see https://blog.flameeyes.eu/tags/lafiles/ config NO_PROGRESS_BAR bool "DO NOT use/display progress_bar" default n help #-- Do not use the progress bar routine. On slower machines # this function consumes precious CPU cycles. #--- End Build Settings endmenu menu "System configuration" depends on !BOOK_BLFS && !REBUILD_MAKEFILE #--- FSTAB config HAVE_FSTAB bool "Use a custom fstab file" default n help #-- Select this if you have an fstab file with entries # for the target system config FSTAB string "Fstab file (optional)" default "***EDIT ME***" depends on HAVE_FSTAB help #-- The location of fstab file (if empty, a template is created) #--- End FSTAB #--- Kernel config CONFIG_BUILD_KERNEL bool "Build the kernel" default n help #-- Select this option if you wish to build the kernel. # # You will be prompted for the full path to the .config # file. It will be copied to the 'sources' directory and # renamed kernel-config config CONFIG string "Kernel config file" default "***EDIT ME***" depends on CONFIG_BUILD_KERNEL help #-- Fully qualified path to a kernel config file # The config file will be copied to ${BUILD_DIR}/sources # and renamed 'kernel-config' #--- End Kernel config NCURSES5 bool "Install non-wide-character ncurses" default n depends on BOOK_LFS || BOOK_LFS_SYSD help #-- Install the optional non wide character ncurses5 library config TIMEZONE string "TimeZone" default "GMT" help #-- The timezone as output by tzselect # This will be copied to /etc/localtime config LANG string "Language" default "$LANG" help #-- LANG variable set in /etc/profile # See http://sourceware.org/git/?p=glibc.git;a=blob;f=localedata/SUPPORTED # for values (or the file localedata/SUPPORTED in glibc tarball) config FULL_LOCALE bool "Install the full set of locales" default n help #-- If set to y, the full set of supported locales # will be installed. Otherwise, only the minimal set # necessary for the tests will be installed, # together with the locale associated with the # LANG you have chosen, if not in the minimal set. #--- Groff page choice prompt "Groff page size" default PAGE_LETTER help #-- Page definition for groff: letter or A4 config PAGE_LETTER bool "letter" config PAGE_A4 bool "A4" endchoice config PAGE string default "letter" if PAGE_LETTER default "A4" if PAGE_A4 #--- End Groff page config HOSTNAME string "Hostname (see help)" default "**EDITME**" help If you are on a public network, use the hostname given to you by your institution, or corporation, etc. If your network is private, that is, behind a firewall such as a box to connect to your ISP, you can choose anything you'd like. Combined with the domain name "local", you have the possibility to access your computer by name instead of address on the private network (see RFC 6762 and https://www.howtogeek.com/167190/). menu "Network configuration" config INTERFACE string "netword card name" default "eth0" help eth0 is used in most cases. Virtual insterfaces may get other names (for example enp0s3 for the default network stack in qemu). Systemd may also rename network interfaces according to their bus addresses. config IP_ADDR string "Static IP address" default "10.0.2.9" help The default here is for a virtual interface in qemu. Private networks have addresses in the range 10.x.x.x or 192.169.x.x. You have to know your network prefix. Then the last figure may be anything you like. config GATEWAY string "Gateway" default "10.0.2.2" help Again, this default is for a qemu network stack. Usually, the gateway is the address of your firewall. config PREFIX string "Subnet prefix" default "24" help Again, this default is for a qemu network stack, but is also the most used in private networks. config BROADCAST string "Broadcast address" default "10.0.2.255" config DOMAIN string "Domain name (see help)" default "local" help Domain Name: Doamin names are registered, so if your computer is on a public network, you cannot use any name you'd like. On a public network, you should have been given a domain name by your corporation, institution, etc. If your network is really private, that is behind a firewall such as a box for connecting to an ISP, you can choose any domain you'd like. You can also opt for "local", see RFC 6762, or "something.test", see RFC 6761. config DNS1 string "Primary Name server" default "10.0.2.3" config DNS2 string "Secondary Name server" default "8.8.8.8" endmenu # Network configuration menu "Console configuration" config FONT string "Console font" default "lat0-16" help Unicode mode is set by default. Setting FONT_MAP, FONT_UNIMAP, etc, must be done manually. config KEYMAP string "Keymap name" default "us" config LOCAL boolean "Hardware clock is set to local time" default n help If the harware clock is set to local time, answer yes, If it is set to UTC, answer no config LOG_LEVEL string "Default log level (1-8)" default "4" depends on BOOK_LFS help This can be changed using dmesg. 1 means "no message", 8 shows every message sent by the kernel, which is very noisy. The default at boot time is 7, which is quite noisy too. endmenu # Console configuration endmenu #--- System configuration menu "Advanced Features" depends on !BOOK_BLFS config REPORT bool "Create SBU and disk usage report" default y #--- ICA config COMPARE bool "Run comparison analysis on final stage" depends on !BOOK_CLFS2 && !BOOK_CLFS3 default n help #-- Should an iterative comparison analysis be performed? # # Unless you are familiar with ICA, do not # select this option # # ICA is an analysis tool for comparing one # build to the next. Builds mays differ from one iteration # to another due to the build order and this tool try # to ferret out those differences by examining the stored # build logs and binary files. # # The scripts are well commented and can be found in ./extras/* # config ITERATIONS int "Number of test runs (2,3,4,5)" if COMPARE depends on COMPARE range 2 5 default 3 config RUN_ICA bool default y if COMPARE #--- End ICA #--- Optimizations if !BOOK_CLFS2 && !BOOK_CLFS3 config CONFIG_OPTIMIZE bool "Optimization and parallelization" default n help # Opens a menu for various optimization settings: # Actual optimization flags MUST be defined in ./optimize/* # before activating this option. # # WARNING: The use of build optimizations may lead to build issues. # If the system doesn't work as expected, please rebuild # without optimizations before asking for support. menu "Optimization settings" depends on CONFIG_OPTIMIZE config N_PARALLEL int "Number of parallel `make' jobs" default 1 help #-- The usual recommandation is (number of CPU cores)+1 # Do not set for meaningful SBU calculations. choice prompt "Optimization level" default OPT_1 help #-- Optimization values are set in optimize/* files config OPT_1 bool "Final system only" config OPT_2 bool "Both temp tools and final system" config OPT_3 bool "Cross tools (only MAKEFLAGS), temp tools and final system" if BOOK_CLFS endchoice config REALSBU bool "Build Binutls pass1 without optimization (Real SBU)" depends on (BOOK_LFS || BOOK_LFS_SYSD) && OPT_2 default n help #-- Use -j1 in make invokation for Binutils pass1 to # get a valid SBU value. endmenu config OPTIMIZE int default "0" if !CONFIG_OPTIMIZE default "1" if OPT_1 default "2" if OPT_2 default "3" if OPT_3 endif #--- End Optimizations #-- Internal Settings menu "Internal Settings (WARNING: for jhalfs developers only)" config SCRIPT_ROOT string "Scripts root" default "jhalfs" config JHALFSDIR string "jhalfs directory" default "$BUILDDIR/$SCRIPT_ROOT" config LOGDIRBASE string "Build logs directory basename" default "logs" config LOGDIR string "Build logs directory" default "$JHALFSDIR/$LOGDIRBASE" config TESTLOGDIRBASE string "Test suites logs directory basename" default "test-logs" config TESTLOGDIR string "Test suites logs directory" default "$JHALFSDIR/$TESTLOGDIRBASE" config FILELOGDIRBASE string "Installed files logs directory basename" default "installed-files" config FILELOGDIR string "Installed files logs directory" default "$JHALFSDIR/$FILELOGDIRBASE" config ICALOGDIR string "ICA logs directory" default "$LOGDIR/ICA" config MKFILE string "Makefile" default "$JHALFSDIR/Makefile" config XSL string "XSL stylesheet" default "$PROGNAME.xsl" config PKG_LST string "Package contents list" default "unpacked" #--- End Internal Settings endmenu #--- End Advanced Features endmenu config REBUILD_MAKEFILE # depends on !BOOK_BLFS bool "Rebuild the Makefile (see help)" default n help #-- Rebuild the Makefile # # This option allows to rebuild the Makefile after # customizing the base system build scripts. # # See README.CUSTOM for more info about this feature. # Note that you should do that after configuring a jhalfs # build, and only if you need changing the build scripts order # or add a new one.