#!/bin/bash

# $Id$


#----------------------------#
get_sources() {              # Download file, write name to MISSING_FILES.DMP if an error
#----------------------------#
  local saveIFS=$IFS
  local IFS line URL1 URL2 FILE BOOKMD5 MD5 HAVEMD5 fromARCHIVE WGETPARAM

  WGETPARAM=""
  if [[ "${RETRYSRCDOWNLOAD}" = "y" ]] ; then
    WGETPARAM+="--retry-connrefused"
  fi
  WGETPARAM+=" --tries ${RETRYDOWNLOADCNT}"
  WGETPARAM+=" --timeout ${DOWNLOADTIMEOUT}"

    # Test if the packages must be downloaded
  [ ! "$GETPKG" = "y" ] && return

  gs_wrt_message(){
    echo "${RED}$1${OFF}"
    echo "$1" >> MISSING_FILES.DMP
  }
    # Housekeeping
  [[ ! -d $BUILDDIR/sources ]] && mkdir $BUILDDIR/sources
  cd $BUILDDIR/sources
    # If using CLFS, /sources is writable by all, but with sticky bit,
    # and user does not hold MD5SUMS nor the other files, so use sudo
  [[ -f MD5SUMS ]] && sudo rm MD5SUMS
  [[ -f MISSING_FILES.DMP ]] && sudo rm MISSING_FILES.DMP
  [[ -f urls.lst ]] && sudo rm urls.lst

    # Generate URLs file
  create_urls

  IFS=$'\x0A'  # Modify the 'internal field separator' to break on 'LF' only
  for line in `cat urls.lst`; do
    IFS=$saveIFS  # Restore the system defaults

      # Skip some packages if they aren't needed
    case $line in
      */tree* | */gcc-testsuite* ) #unneeded now?
            [[ "$TEST" = "0" ]] && continue
          ;;
      */vim-*-lang* )
            [[ "$VIMLANG" = "0" ]] && continue
          ;;
    esac

      # Locations
    URL1=`echo $line | cut -d" " -f2` # Preferred URL
    URL2=`echo $line | cut -d" " -f1` # Fallback Upstream URL
    FILE=`basename $URL1` # File name
    BOOKMD5=`echo $line | cut -d" " -f3` # MD5 book value

      # Validation pair
    MD5="$BOOKMD5  $FILE"
    HAVEMD5=1

    set -e
      # If the file exists in the archive copy it to the
      # $BUILDDIR/sources dir. MD5SUM will be validated later.
    if [ ! -z ${SRC_ARCHIVE} ] &&
       [   -d ${SRC_ARCHIVE} ] &&
       [   -f ${SRC_ARCHIVE}/$FILE ]; then
      cp ${SRC_ARCHIVE}/$FILE .
      echo "$FILE: -- copied from $SRC_ARCHIVE"
      fromARCHIVE=1
    else
      fromARCHIVE=0
      # If the file does not exist yet in /sources download a fresh one
      if [ ! -f $FILE ] ; then
	if [[ ! ("$SRC_ARCHIVE" = "") ]] ; then
	  echo "${BOLD}${YELLOW}$FILE: not found in ${SRC_ARCHIVE} or ${BUILDDIR}/sources${OFF}"
	else
	  echo "${BOLD}${YELLOW}$FILE: not found in ${BUILDDIR}/sources${OFF}"
	fi
        if ! wget $URL1 $WGETPARAM && ! wget $URL2 $WGETPARAM ; then
          gs_wrt_message "$FILE not found in the SRC_ARCHIVE or on any server..SKIPPING"
          continue
        fi
      else
	  echo "${BOLD}${YELLOW}$FILE: using cached file in ${BUILDDIR}/sources${OFF}"
      fi
    fi

    # Deal with udev and bootscripts m5sum issue
    [[ $BOOKMD5 = "BOOTSCRIPTS-MD5SUM" ]]    && continue
    [[ $BOOKMD5 = "UDEV-MD5SUM" ]]           && continue
    [[ $BOOKMD5 = "LFS-NETSCRIPTS-MD5SUM" ]] && continue

      # IF the md5sum does not match the existing files
    if ! echo "$MD5" | md5sum -c - >/dev/null ; then
      [[ $fromARCHIVE = "1" ]] && echo "${BOLD}${YELLOW}MD5SUM did not match SRC_ARCHIVE copy${OFF}"
      [[ $fromARCHIVE = "0" ]] && echo "${BOLD}${YELLOW}MD5SUM did not match REMOTE copy${OFF}"
        # Remove the old file and download a new one
      rm -fv $FILE
        # Force storage in SRC_ARCHIVE
      fromARCHIVE=0;
        # Try to retrieve again the file. Servers in reverse order.
      if ! wget $URL2 $WGETPARAM && ! wget $URL1 $WGETPARAM ; then
        gs_wrt_message "$FILE not found on the servers.. SKIPPING"
        continue
      fi
    fi

      # Validate the MD5SUM one last time
    if ! echo "$MD5" | md5sum -c - >/dev/null ; then
      gs_wrt_message "$FILE does not match MD5SUMS value"
      # Force generation of MD5SUM
      HAVEMD5=0
    fi

      # Generate a fresh MD5SUM for this file
    if [[ "$HAVEMD5" = "0" ]] ; then
      echo "${BOLD}${YELLOW}Generating a new MD5SUM for ${OFF}$FILE"
      echo "NEW MD5SUM: $(md5sum $FILE)" >> MISSING_FILES.DMP
    fi

      # Good or bad we write the original md5sum to a file
    echo "$MD5" >> MD5SUMS

     # Copy the freshly downloaded file
     # to the source archive.
   if [ ! -z ${SRC_ARCHIVE}  ] &&
      [   -d ${SRC_ARCHIVE}  ] &&
      [   -w ${SRC_ARCHIVE}  ] &&
      [ "$fromARCHIVE" = "0" ] ; then
        echo "Storing file:<$FILE> in the package archive"
        cp -f $FILE ${SRC_ARCHIVE}
   fi

  done

  if [[ -s MISSING_FILES.DMP ]]; then
    echo  -e "\n\n${tab_}${RED} One or more files were not retrieved or have bad MD5SUMS.\n${tab_} Check ${L_arrow}$BUILDDIR/sources/MISSING_FILES.DMP${R_arrow} for names ${OFF}\n"
      # Do not allow the automatic execution of the Makefile.
    echo "${tab_}${BOLD}${RED}*** ${YELLOW}Automatic execution of the generated makefile has been inhibited. ${RED}***${OFF}${nl_}"
    RUNMAKE="n"
  fi
}

#----------------------------#
create_urls() {              #
#----------------------------#
  cd $JHALFSDIR

  case ${PROGNAME} in
    clfs*)
        echo -n "Creating CLFS <${ARCH}> specific URLs file"
        xsltproc --nonet --xinclude \
                 --stringparam server $SERVER \
                 --stringparam family clfs \
                 -o $BUILDDIR/sources/urls.lst urls.xsl \
                 $BOOK/BOOK/materials/$ARCH-chapter.xml >>$LOGDIR/$LOG 2>&1
        echo " ...OK"
      ;;
    hlfs)
        echo -n "Creating HLFS <${MODEL}> + <${KERNEL}> specific URLs file"
        xsltproc --nonet --xinclude \
                 --stringparam server $SERVER \
                 --stringparam family lfs \
                 --stringparam model $MODEL \
                 --stringparam kernel $KERNEL \
                 -o $BUILDDIR/sources/urls.lst urls.xsl \
                 $BOOK/chapter04/chapter04.xml >>$LOGDIR/$LOG 2>&1
        echo " ...OK"
      ;;
    lfs)
        echo -n "Creating LFS specific URLs file"
        xsltproc --nonet --xinclude \
                 --stringparam server $SERVER \
                 --stringparam family lfs \
                 --stringparam pkgmngt $PKGMNGT \
                 -o ../sources/urls.lst urls.xsl \
                 $BOOK/chapter03/chapter03.xml >>$LOGDIR/$LOG 2>&1
        echo " ...OK"
      ;;
  esac

  cd $BUILDDIR/sources

  if [[ "${CUSTOM_TOOLS}" = "y" ]]; then
    add_CustomToolsURLS
  fi

}