source: basicnet/netlibs/wvstreams.xml@ 2c1ff38

<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN"
   "http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd" [
  <!ENTITY % general-entities SYSTEM "../../general.ent">
  %general-entities;

    <!-- Inserted as a reminder to do this. The mention of a test suite
         is usually right before the root user installation commands. Please
         delete these 12 (including one blank) lines after you are done.-->

    <!-- Use one of the two mentions below about a test suite,
         delete the line that is not applicable. Of course, if the
         test suite uses syntax other than "make check", revise the
         line to reflect the actual syntax to run the test suite -->

    <!-- <para>This package does not come with a test suite.</para> -->
    <!-- <para>To test the results, issue: <command>make check</command>.</para> -->

  <!ENTITY wvstreams-download-http "http://open.nit.ca/download/wvstreams-&wvstreams-version;.tar.gz">
  <!ENTITY wvstreams-download-ftp  " ">
  <!ENTITY wvstreams-md5sum        "103230cb9926cb8f3f4d8dc8584f3b9c">
  <!ENTITY wvstreams-size          "1.2 MB">
  <!ENTITY wvstreams-buildsize     "46 MB (additional 44 MB to install documentation)">
  <!ENTITY wvstreams-time          "0.8 SBU (additional 1.9 SBU to build documentation)">
]>

<sect1 id="wvstreams" xreflabel="WvStreams-&wvstreams-version;">
  <?dbhtml filename="wvstreams.html"?>

  <sect1info>
    <othername>$LastChangedBy$</othername>
    <date>$Date$</date>
    <keywordset>
      <keyword role="package">wvstreams-&wvstreams-version;.tar</keyword>
      <keyword role="ftpdir">wvstreams</keyword>
    </keywordset>
  </sect1info>

  <title>WvStreams-&wvstreams-version;</title>

  <indexterm zone="wvstreams">
    <primary sortas="a-WvStreams">WvStreams</primary>
  </indexterm>

  <sect2 role="package">
    <title>Introduction to WvStreams</title>

    <para><application>WvStreams</application> is a library suite containing
    platform-independent C++ networking and utilities libraries for rapid
    application development.</para>

    <bridgehead renderas="sect3">Package Information</bridgehead>
    <itemizedlist spacing='compact'>
      <listitem>
        <para>Download (HTTP): <ulink url="&wvstreams-download-http;"/></para>
      </listitem>
      <listitem>
        <para>Download (FTP): <ulink url="&wvstreams-download-ftp;"/></para>
      </listitem>
      <listitem>
        <para>Download MD5 sum: &wvstreams-md5sum;</para>
      </listitem>
      <listitem>
        <para>Download size: &wvstreams-size;</para>
      </listitem>
      <listitem>
        <para>Estimated disk space required: &wvstreams-buildsize;</para>
      </listitem>
      <listitem>
        <para>Estimated build time: &wvstreams-time;</para>
      </listitem>
    </itemizedlist>

    <bridgehead renderas="sect3">WvStreams Dependencies</bridgehead>

    <bridgehead renderas="sect4">Required</bridgehead>
    <para role="required"><xref linkend="openssl"/></para>

    <bridgehead renderas="sect4">Optional</bridgehead>
    <para role="optional"><xref linkend="pkgconfig"/>,
    <xref linkend="gamin"/>,
    <!-- <xref linkend="db"/>, -->
    <xref linkend="linux-pam"/>,
    <xref linkend="tcl"/>,
    <xref linkend="qt"/>,
    <xref linkend="speex"/>,
    <xref linkend="libvorbis"/>,
    <xref linkend="doxygen"/>,
    <ulink url="http://www.fftw.org/">FFTW-2.<replaceable>&lt;X&gt;</replaceable></ulink>,
    <ulink url="http://www.swig.org">SWIG</ulink>,
    <ulink url="http://qdbm.sourceforge.net/">QDBM</ulink>,
    <ulink url="http://www.openslp.org/">OpenSLP</ulink>,
    <ulink url="http://xplc.sourceforge.net/">XPLC</ulink>,
    <ulink url="http://valgrind.kde.org/">Valgrind</ulink>, and
    <ulink url="http://perens.com/FreeSoftware/">Electric Fence</ulink></para>

    <para condition="html" role="usernotes">User Notes:
    <ulink url="&blfs-wiki;/wvstreams"/></para>

  </sect2>

  <sect2 role="installation">
    <title>Installation of WvStreams</title>

    <para>If you have <application>Tcl</application> and
    <application>SWIG</application> installed and wish to utilize them, run the
    following:</para>

<screen><userinput>sed -i -e "s/8_3/8_4/"  -e "s/8\.3/8.4/" \
      configure{,.ac} include/wvautoconf.h.in bindings/rules.mk \
      gnulib/config.h</userinput></screen>

    <para>Install <application>WvStreams</application> by running the following
    commands:</para>

<screen><userinput>./configure --prefix=/usr \
    --sysconfdir=/etc --localstatedir=/var &amp;&amp;
make</userinput></screen>

    <para>If <application>Doxygen</application> is installed and you wish to build
    the API documentation, issue the following command:</para>

<screen><userinput>make doxygen</userinput></screen>

    <para>Now, as the <systemitem class="username">root</systemitem> user:</para>

<screen role='root'><userinput>make install</userinput></screen>

    <para>If you built the API documentation, install it using the following commands:</para>

<screen role='root'><userinput>install -v -d -m755 /usr/share/doc/wvstreams-&wvstreams-version;/doxy-html &amp;&amp;
install -v -m644 Docs/doxy-html/* \
    /usr/share/doc/wvstreams-&wvstreams-version;/doxy-html</userinput></screen>

  </sect2>

  <sect2 role="commands">
    <title>Command Explanations</title>

    <para><command>sed -i ...</command>: Change to tcl8.4 from tcl8.3.</para> 

    <para><parameter>--sysconfdir=/etc</parameter>: This parameter places
    configuration files in <filename class='directory'>/etc</filename> instead of
    <filename class='directory'>/usr/etc</filename>.</para>

    <para><parameter>--localstatedir=/var</parameter>: This parameter places
    <command>uniconfd</command> run-time files in
    <filename class='directory'>/var/lib</filename> instead of
    <filename class='directory'>/usr/var/lib</filename>.</para>

  </sect2>

  <sect2 role="configuration">
    <title>Configuring WvStreams</title>

    <sect3 id="wvstreams-config">
      <title>Config Files</title>

      <para><filename>/etc/uniconf.conf</filename></para>

      <indexterm zone="wvstreams wvstreams-config">
        <primary sortas="e-etc-uniconf.conf">/etc/uniconf.conf</primary>
      </indexterm>

    </sect3>

    <sect3>
      <title>Configuration Information</title>

      <xi:include xmlns:xi="http://www.w3.org/2003/XInclude" href="../../lib-config.xml"/>

    </sect3>

  </sect2>

  <sect2 role="content">
    <title>Contents</title>

    <segmentedlist>
      <segtitle>Installed Programs</segtitle>
      <segtitle>Installed Libraries</segtitle>
      <segtitle>Installed Directories</segtitle>

      <seglistitem>
        <seg>uni and uniconfd</seg>
        <seg>libuniconf.{so,a}, libwvbase.{so,a}, libwvfft.{so,a},
        libwvoggspeex.{so,a}, libwvoggvorbis.{so,a}, libwvqt.{so,a},
        libwvstreams.{so,a}, libwvtelephony.{so,a}, libwvutils.{so,a} and
        libxplc-cxx.a</seg>
        <seg>/usr/include/wvstreams, /usr/share/doc/wvstreams-&wvstreams-version; and
        /var/lib/uniconf</seg>
      </seglistitem>
    </segmentedlist>

    <variablelist>
      <bridgehead renderas="sect3">Short Descriptions</bridgehead>
      <?dbfo list-presentation="list"?>
      <?dbhtml list-presentation="table"?>

      <varlistentry id="uni">
        <term><command>uni</command></term>
        <listitem>
          <para>is a program to interface with the UniConf configuration system.</para>
          <indexterm zone="wvstreams uni">
            <primary sortas="b-uni">uni</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="uniconfd">
        <term><command>uniconfd</command></term>
        <listitem>
          <para>is a daemon program for the UniConf configuration system.</para>
          <indexterm zone="wvstreams uniconfd">
            <primary sortas="b-uniconfd">uniconfd</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="libuniconf">
        <term><filename class='libraryfile'>libuniconf.{so,a}</filename></term>
        <listitem>
          <para>contains functions that define a hierarchical registry
          abstraction in the UniConf configuration system.</para>
          <indexterm zone="wvstreams libuniconf">
            <primary sortas="c-libuniconf">libuniconf.{so,a}</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="libwvbase">
        <term><filename class='libraryfile'>libwvbase.{so,a}</filename></term>
        <listitem>
          <para>contains the Base64 encoder and decoder implementations functions.</para>
          <indexterm zone="wvstreams libwvbase">
            <primary sortas="c-libwvbase">libwvbase.{so,a}</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="libwvfft">
        <term><filename class='libraryfile'>libwvfft.{so,a}</filename></term>
        <listitem>
          <para>enables <application>WvStreams</application> programs to
          easily handle Fast-Fourier transforms, instead of forcing the programmer to
          use the much harder to use <filename class="libraryfile">libfftw</filename>
          interface.</para>
          <indexterm zone="wvstreams libwvfft">
            <primary sortas="c-libwvfft">libwvfft.{so,a}</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="libwvoggspeex">
        <term><filename class='libraryfile'>libwvoggspeex.{so,a}</filename></term>
        <listitem>
          <para>enables quick and painless creation of audio streams using
          the <application>Speex</application> Voice over
          IP CODEC.</para>
          <indexterm zone="wvstreams libwvoggspeex">
            <primary sortas="c-libwvoggspeex">libwvoggspeex.{so,a}</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="libwvoggvorbis">
        <term><filename class='libraryfile'>libwvoggvorbis.{so,a}</filename></term>
        <listitem>
          <para>enables quick and painless creation of audio streams using
          the OggVorbis CODEC.</para>
          <indexterm zone="wvstreams libwvoggvorbis">
            <primary sortas="c-libwvoggvorbis">libwvoggvorbis.{so,a}</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="libwvqt">
        <term><filename class='libraryfile'>libwvqt.{so,a}</filename></term>
        <listitem>
          <para>enables <application>WvStreams</application> to act as the
          I/O and configuration back end for <application>Qt</application> and
          <application>KDE</application>.</para>
          <indexterm zone="wvstreams libwvqt">
            <primary sortas="c-libwvqt">libwvqt.{so,a}</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="libwvstreams">
        <term><filename class='libraryfile'>libwvstreams.{so,a}</filename></term>
        <listitem>
          <para>provides functions for basic streaming I/O support.</para>
          <indexterm zone="wvstreams libwvstreams">
            <primary sortas="c-libwvstreams">libwvstreams.{so,a}</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="libtelephony">
        <term><filename class='libraryfile'>libtelephony.{so,a}</filename></term>
        <listitem>
          <para>contains telephony function routines such as echo
          cancellation, dc offset removal, automatic gain control, etc.</para>
          <indexterm zone="wvstreams libtelephony">
            <primary sortas="c-libtelephony">libtelephony.{so,a}</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="libwvutils">
        <term><filename class='libraryfile'>libwvutils.{so,a}</filename></term>
        <listitem>
          <para>contains functions required by the
          <application>WvStreams</application> libraries and utility programs.</para>
          <indexterm zone="wvstreams libwvutils">
            <primary sortas="c-libwvutils">libwvutils.{so,a}</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="libxplc-cxx">
        <term><filename class='libraryfile'>libxplc-cxx.a</filename></term>
        <listitem>
          <para>contains helper functions for the C++
          <application>WvStreams</application> bindings.</para>
          <indexterm zone="wvstreams libxplc-cxx">
            <primary sortas="c-libxplc-cxx">libxplc-cxx.a</primary>
          </indexterm>
        </listitem>
      </varlistentry>

    </variablelist>

  </sect2>

</sect1>